Pages : 1
#1 Le 13/03/2007, à 19:47
- Francois(Lyon)
Ecran de démarrage noir
Allez, je crois avoir fais le tour du forum, (il sont nombreux les posts) mais je ne trouve pas la solution à mon problème :
Lorsque je démarre, l'écran qui s'affiche est noir, est le reste même après 10 minutes d'attente.
voici mon xorg.conf
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "v4l"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
Driver "vesa"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "L22W-2"
Option "DPMS"
HorizSync 31-83
VertRefresh 56-75
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
Monitor "L22W-2"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1680x1050" "1280x1024" "1280x960" "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1680x1050" "1280x1024" "1280x960" "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1680x1050" "1280x1024" "1280x960" "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050" "1280x1024" "1280x960" "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1280x1024" "1280x960" "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1280x1024" "1280x960" "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSectionA priori cela ne vient pas de ce fichier.
j'ai beau tenter <ctrl>+<alt>+<F 1 à 7> rien n'y fait
il fait que je fasse <Echap> que je selectionne le "recovery mode"
et en ne loguant puis en faisant Exit j'arrive sur la fenetre de login.
Voici mon grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=d1f7cc72-fe8d-43b5-a7a2-7152b69b9fea ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## ## End Default Options ##
title Ubuntu, kernel 2.6.17-11-386
root (hd0,0)
kernel /boot/vmlinuz-2.6.17-11-386 root=UUID=d1f7cc72-fe8d-43b5-a7a2-7152b69b9fea ro quiet splash
initrd /boot/initrd.img-2.6.17-11-386
savedefault
boot
title Ubuntu, kernel 2.6.17-11-386 (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.17-11-386 root=UUID=d1f7cc72-fe8d-43b5-a7a2-7152b69b9fea ro single
initrd /boot/initrd.img-2.6.17-11-386
boot
title Ubuntu, kernel 2.6.15-28-386
root (hd0,0)
kernel /boot/vmlinuz-2.6.15-28-386 root=UUID=d1f7cc72-fe8d-43b5-a7a2-7152b69b9fea ro quiet splash
initrd /boot/initrd.img-2.6.15-28-386
savedefault
boot
title Ubuntu, kernel 2.6.15-28-386 (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.15-28-386 root=UUID=d1f7cc72-fe8d-43b5-a7a2-7152b69b9fea ro single
initrd /boot/initrd.img-2.6.15-28-386
boot
title Ubuntu, kernel 2.6.15-23-386
root (hd0,0)
kernel /boot/vmlinuz-2.6.15-23-386 root=UUID=d1f7cc72-fe8d-43b5-a7a2-7152b69b9fea ro quiet splash
initrd /boot/initrd.img-2.6.15-23-386
savedefault
boot
title Ubuntu, kernel 2.6.15-23-386 (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.15-23-386 root=UUID=d1f7cc72-fe8d-43b5-a7a2-7152b69b9fea ro single
initrd /boot/initrd.img-2.6.15-23-386
boot
title Ubuntu, memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
boot
### END DEBIAN AUTOMAGIC KERNELS LISTConcernant mon materiel voici le résultat de lshw ;
albatros
description: Computer
width: 32 bits
*-core
description: Motherboard
physical id: 0
*-memory
description: System memory
physical id: 0
size: 247MB
*-cpu
product: Intel(R) Celeron(R) CPU 2.50GHz
vendor: Intel Corp.
physical id: 1
bus info: cpu@0
version: 15.2.9
size: 18EHz
width: 32 bits
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up cid xtpr
configuration: id=0
*-cache
description: L1 cache
physical id: 0
size: 8KB
*-pci
description: Host bridge
product: 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface
vendor: Intel Corporation
physical id: e8000000
bus info: pci@00:00.0
version: 03
width: 32 bits
clock: 33MHz
resources: iomemory:e8000000-ebffffff
*-display
description: VGA compatible controller
product: 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device
vendor: Intel Corporation
physical id: 2
bus info: pci@00:02.0
version: 03
size: 128MB
width: 32 bits
clock: 33MHz
capabilities: vga bus_master cap_list
configuration: driver=i810_smbus
resources: iomemory:e0000000-e7ffffff iomemory:ee000000-ee07ffff irq:5
*-usb:0
description: USB Controller
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@00:1d.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd
resources: ioport:d800-d81f irq:177
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.17-11-386 uhci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb
description: Mouse
product: USB Receiver
vendor: Logitech
physical id: 1
bus info: usb@1:1
version: 16.00
capabilities: usb-1.10
configuration: driver=usbhid maxpower=50mA speed=1.5MB/s
*-usb:1
description: USB Controller
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@00:1d.1
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd
resources: ioport:d000-d01f irq:185
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.17-11-386 uhci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:2
description: USB Controller
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@00:1d.2
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd
resources: ioport:d400-d41f irq:169
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.17-11-386 uhci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:3
description: USB Controller
product: 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@00:1d.7
version: 02
width: 32 bits
clock: 33MHz
capabilities: ehci bus_master cap_list
configuration: driver=ehci_hcd
resources: iomemory:ee080000-ee0803ff irq:193
*-usbhost
product: EHCI Host Controller
vendor: Linux 2.6.17-11-386 ehci_hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 2.06
capabilities: usb-2.00
configuration: driver=hub maxpower=0mA slots=6 speed=480.0MB/s
*-usb:0
description: Mass storage device
product: USB TO IDE
vendor: Genesys Logic, Inc.
physical id: 3
bus info: usb@4:3
version: 0.32
capabilities: usb-2.00 scsi
configuration: driver=usb-storage maxpower=500mA speed=480.0MB/s
*-usb:1
description: USB hub
product: USB2.0 Hub
vendor: Genesys Logic, Inc.
physical id: 4
bus info: usb@4:4
version: 5.07
capabilities: usb-2.00
configuration: driver=hub maxpower=100mA slots=4 speed=480.0MB/s
*-usb
description: Mass storage device
product: LaCie Hard Drive USB
vendor: LaCie
physical id: 1
bus info: usb@4:4.1
version: 0.00
serial: 10000E000B20A6E7
capabilities: usb-2.00 scsi
configuration: driver=usb-storage maxpower=2mA speed=480.0MB/s
*-pci
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@00:1e.0
version: 82
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master
*-network:0
description: Wireless interface
product: AR5212 802.11abg NIC
vendor: Atheros Communications, Inc.
physical id: 9
bus info: pci@01:09.0
logical name: wifi0
version: 01
serial: 00:18:4d:71:6b:ce
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list logical ethernet physical wireless
configuration: broadcast=yes driver=ath_pci ip=192.168.1.101 multicast=yes wireless=IEEE 802.11g
resources: iomemory:ed010000-ed01ffff irq:209
*-communication UNCLAIMED
description: Communication controller
product: HSF 56k HSFi Modem
vendor: Conexant
physical id: a
bus info: pci@01:0a.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
resources: iomemory:ed000000-ed00ffff ioport:c000-c007 irq:255
*-network:1
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: c
bus info: pci@01:0c.0
logical name: eth0
version: 10
serial: 00:0c:76:a4:bc:07
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical
configuration: broadcast=yes driver=8139too multicast=yes
resources: ioport:c400-c4ff iomemory:ed020000-ed0200ff irq:193
*-firewire
description: FireWire (IEEE 1394)
product: IEEE 1394 Host Controller
vendor: VIA Technologies, Inc.
physical id: d
bus info: pci@01:0d.0
version: 80
width: 32 bits
clock: 33MHz
capabilities: ohci bus_master cap_list
configuration: driver=ohci1394
resources: iomemory:ed021000-ed0217ff ioport:c800-c87f irq:193
*-isa UNCLAIMED
description: ISA bridge
product: 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge
vendor: Intel Corporation
physical id: 1f
bus info: pci@00:1f.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
*-ide
description: IDE interface
product: 82801DB (ICH4) IDE Controller
vendor: Intel Corporation
physical id: 1f.1
bus info: pci@00:1f.1
version: 02
width: 32 bits
clock: 33MHz
capabilities: ide bus_master
configuration: driver=PIIX_IDE
resources: ioport:f000-f00f iomemory:10100000-101003ff irq:169
*-ide:0
description: IDE Channel 0
physical id: 0
bus info: ide@0
logical name: ide0
clock: 33MHz
*-disk:0
product: ST380011A
vendor: Seagate
physical id: 0
bus info: ide@0.0
logical name: /dev/hda
capacity: 74GB
*-disk:1
product: ST38410A
vendor: Seagate
physical id: 1
bus info: ide@0.1
logical name: /dev/hdb
capacity: 8223MB
*-ide:1
description: IDE Channel 1
physical id: 1
bus info: ide@1
logical name: ide1
clock: 33MHz
*-cdrom:0
product: HL-DT-STDVD-ROM GDR8162B
physical id: 0
bus info: ide@1.0
logical name: /dev/hdc
capabilities: packet
*-cdrom:1
product: SONY CD-RW CRX215E5
physical id: 1
bus info: ide@1.1
logical name: /dev/hdd
capabilities: packet
*-serial UNCLAIMED
description: SMBus
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@00:1f.3
version: 02
width: 32 bits
clock: 33MHz
resources: ioport:500-51f irq:255
*-multimedia
description: Multimedia audio controller
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
vendor: Intel Corporation
physical id: 1f.5
bus info: pci@00:1f.5
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=Intel ICH
resources: ioport:e000-e0ff ioport:e400-e43f iomemory:ee081000-ee0811ff iomemory:ee082000-ee0820ff irq:201
*-scsi:0
physical id: 1
bus info: scsi@0
logical name: scsi0
capabilities: scsi-host
configuration: driver=usb-storage
*-scsi:1
physical id: 2
bus info: scsi@1
logical name: scsi1
capabilities: scsi-host
configuration: driver=usb-storagemerci d'avance pour votre aide 
----------------
Config : MacMini
----------------
Hors ligne
Pages : 1