Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".
Test de l'ISO d'Ubuntu francophone : nous avons besoin de testeurs pour la version francophone d'Ubuntu 14.04. Liens et informations ici.

Attention, une faille de sécurité dans bash a récemment été rapportée, il est recommandé de mettre à jour son système (plus de détails) *** mise à jour 12/10/2014 ***

#1 Le 15/09/2012, à 12:08

cracottequitue

[RESOLU]Install de pilote ATI

Salut a tous,

Je viens vous demandé conseil car j'ai une carte graphique Radeon HD 6400M Series, et 2 pilotes a installé (dans pilotes additionnels) mais aucun ne fonctionnent. J'ai vu sur un post qu'on pouvais allé recuperer un pilote la, le truc c'est est il vraiment interessant et si oui comment l'installé. j'ai l'impression de ne pas utilisé mon pc a 100%.

Pour le fichier xorg.conf

Section "ServerLayout"
	Identifier     "aticonfig Layout"
	Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Module"
	Load  "glx"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]-0"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]-0"
	Driver      "fglrx"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Default Screen"
	DefaultDepth     24
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]-0"
	Device     "aticonfig-Device[0]-0"
	Monitor    "aticonfig-Monitor[0]-0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

et pour xorg.log

[    16.510] 
X.Org X Server 1.11.3
Release Date: 2011-12-16
[    16.511] X Protocol Version 11, Revision 0
[    16.511] Build Operating System: Linux 2.6.42-26-generic i686 Ubuntu
[    16.511] Current Operating System: Linux cracotte-HP-Pavilion-g6-Notebook-PC 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686
[    16.511] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-30-generic-pae root=UUID=dfa8c0f0-50ec-4583-9134-34c781549bc7 ro quiet splash vt.handoff=7
[    16.511] Build Date: 04 August 2012  01:51:24AM
[    16.511] xorg-server 2:1.11.4-0ubuntu10.7 (For technical support please see http://www.ubuntu.com/support) 
[    16.511] Current version of pixman: 0.24.4
[    16.511] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    16.511] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    16.511] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 14 15:26:43 2012
[    16.545] (==) Using config file: "/etc/X11/xorg.conf"
[    16.545] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    16.686] (==) No Layout section.  Using the first Screen section.
[    16.686] (**) |-->Screen "Default Screen" (0)
[    16.686] (**) |   |-->Monitor "<default monitor>"
[    16.698] (==) No monitor specified for screen "Default Screen".
	Using a default monitor configuration.
[    16.698] (==) Automatically adding devices
[    16.698] (==) Automatically enabling devices
[    16.734] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    16.734] 	Entry deleted from font path.
[    16.734] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    16.734] 	Entry deleted from font path.
[    16.734] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    16.734] 	Entry deleted from font path.
[    16.735] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    16.735] 	Entry deleted from font path.
[    16.735] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    16.735] 	Entry deleted from font path.
[    16.735] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    16.735] 	Entry deleted from font path.
[    16.735] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    16.735] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    16.735] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    16.747] (II) Loader magic: 0xb773e5a0
[    16.747] (II) Module ABI versions:
[    16.747] 	X.Org ANSI C Emulation: 0.4
[    16.747] 	X.Org Video Driver: 11.0
[    16.747] 	X.Org XInput driver : 16.0
[    16.747] 	X.Org Server Extension : 6.0
[    16.749] (--) PCI:*(0:0:2:0) 8086:0116:103c:1670 rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005000/64
[    16.749] (--) PCI: (0:1:0:0) 1002:6760:103c:1670 rev 0, Mem @ 0xa0000000/268435456, 0xc2600000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[    16.749] (II) Open ACPI successful (/var/run/acpid.socket)
[    16.749] (II) "extmod" will be loaded by default.
[    16.749] (II) "dbe" will be loaded by default.
[    16.749] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    16.749] (II) "record" will be loaded by default.
[    16.749] (II) "dri" will be loaded by default.
[    16.749] (II) "dri2" will be loaded by default.
[    16.749] (II) LoadModule: "glx"
[    16.814] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/modules/extensions/libglx.so
[    17.088] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    17.088] 	compiled for 6.9.0, module version = 1.0.0
[    17.088] (II) Loading extension GLX
[    17.088] (II) LoadModule: "extmod"
[    17.131] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    17.147] (II) Module extmod: vendor="X.Org Foundation"
[    17.147] 	compiled for 1.11.3, module version = 1.0.0
[    17.147] 	Module class: X.Org Server Extension
[    17.147] 	ABI class: X.Org Server Extension, version 6.0
[    17.147] (II) Loading extension MIT-SCREEN-SAVER
[    17.147] (II) Loading extension XFree86-VidModeExtension
[    17.147] (II) Loading extension XFree86-DGA
[    17.147] (II) Loading extension DPMS
[    17.147] (II) Loading extension XVideo
[    17.147] (II) Loading extension XVideo-MotionCompensation
[    17.147] (II) Loading extension X-Resource
[    17.147] (II) LoadModule: "dbe"
[    17.148] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    17.157] (II) Module dbe: vendor="X.Org Foundation"
[    17.157] 	compiled for 1.11.3, module version = 1.0.0
[    17.157] 	Module class: X.Org Server Extension
[    17.157] 	ABI class: X.Org Server Extension, version 6.0
[    17.157] (II) Loading extension DOUBLE-BUFFER
[    17.157] (II) LoadModule: "record"
[    17.158] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    17.159] (II) Module record: vendor="X.Org Foundation"
[    17.159] 	compiled for 1.11.3, module version = 1.13.0
[    17.159] 	Module class: X.Org Server Extension
[    17.159] 	ABI class: X.Org Server Extension, version 6.0
[    17.159] (II) Loading extension RECORD
[    17.159] (II) LoadModule: "dri"
[    17.160] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    17.161] (II) Module dri: vendor="X.Org Foundation"
[    17.161] 	compiled for 1.11.3, module version = 1.0.0
[    17.161] 	ABI class: X.Org Server Extension, version 6.0
[    17.161] (II) Loading extension XFree86-DRI
[    17.161] (II) LoadModule: "dri2"
[    17.161] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    17.176] (II) Module dri2: vendor="X.Org Foundation"
[    17.176] 	compiled for 1.11.3, module version = 1.2.0
[    17.176] 	ABI class: X.Org Server Extension, version 6.0
[    17.176] (II) Loading extension DRI2
[    17.176] (==) Matched intel as autoconfigured driver 0
[    17.176] (==) Matched vesa as autoconfigured driver 1
[    17.176] (==) Matched fbdev as autoconfigured driver 2
[    17.176] (==) Assigned the driver to the xf86ConfigLayout
[    17.176] (II) LoadModule: "intel"
[    17.178] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    17.189] (II) Module intel: vendor="X.Org Foundation"
[    17.189] 	compiled for 1.11.3, module version = 2.17.0
[    17.189] 	Module class: X.Org Video Driver
[    17.189] 	ABI class: X.Org Video Driver, version 11.0
[    17.189] (II) LoadModule: "vesa"
[    17.190] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    17.202] (II) Module vesa: vendor="X.Org Foundation"
[    17.202] 	compiled for 1.11.3, module version = 2.3.0
[    17.202] 	Module class: X.Org Video Driver
[    17.202] 	ABI class: X.Org Video Driver, version 11.0
[    17.202] (II) LoadModule: "fbdev"
[    17.203] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    17.206] (II) Module fbdev: vendor="X.Org Foundation"
[    17.206] 	compiled for 1.11.3, module version = 0.4.2
[    17.206] 	ABI class: X.Org Video Driver, version 11.0
[    17.206] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[    17.207] (II) VESA: driver for VESA chipsets: vesa
[    17.207] (II) FBDEV: driver for framebuffer: fbdev
[    17.207] (++) using VT number 7

[    17.211] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    17.211] (WW) Falling back to old probe method for vesa
[    17.212] (WW) Falling back to old probe method for fbdev
[    17.315] (II) Loading sub module "fbdevhw"
[    17.315] (II) LoadModule: "fbdevhw"
[    17.317] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    17.325] (II) Module fbdevhw: vendor="X.Org Foundation"
[    17.325] 	compiled for 1.11.3, module version = 0.0.2
[    17.325] 	ABI class: X.Org Video Driver, version 11.0
[    17.325] drmOpenDevice: node name is /dev/dri/card0
[    17.325] drmOpenDevice: open result is 9, (OK)
[    17.325] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    17.325] drmOpenDevice: node name is /dev/dri/card0
[    17.325] drmOpenDevice: open result is 9, (OK)
[    17.325] drmOpenByBusid: drmOpenMinor returns 9
[    17.325] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    17.325] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
[    17.325] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[    17.325] (==) intel(0): RGB weight 888
[    17.325] (==) intel(0): Default visual is TrueColor
[    17.325] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[    17.325] (--) intel(0): Chipset: "Sandybridge Mobile (GT2)"
[    17.326] (**) intel(0): Relaxed fencing enabled
[    17.326] (**) intel(0): Wait on SwapBuffers? enabled
[    17.326] (**) intel(0): Triple buffering? enabled
[    17.326] (**) intel(0): Framebuffer tiled
[    17.326] (**) intel(0): Pixmaps tiled
[    17.326] (**) intel(0): 3D buffers tiled
[    17.326] (**) intel(0): SwapBuffers wait enabled
[    17.326] (==) intel(0): video overlay key set to 0x101fe
[    17.326] (II) intel(0): Output LVDS1 has no monitor section
[    17.326] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[    17.326] (II) intel(0): Output VGA1 has no monitor section
[    17.331] (II) intel(0): Output HDMI1 has no monitor section
[    17.380] (II) intel(0): Output DP1 has no monitor section
[    17.380] (II) intel(0): EDID for output LVDS1
[    17.380] (II) intel(0): Manufacturer: LGD  Model: 2f2  Serial#: 0
[    17.380] (II) intel(0): Year: 2010  Week: 0
[    17.380] (II) intel(0): EDID Version: 1.3
[    17.380] (II) intel(0): Digital Display Input
[    17.380] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    17.380] (II) intel(0): Gamma: 2.20
[    17.380] (II) intel(0): No DPMS capabilities specified
[    17.380] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    17.380] (II) intel(0): First detailed timing is preferred mode
[    17.380] (II) intel(0): redX: 0.605 redY: 0.355   greenX: 0.329 greenY: 0.579
[    17.380] (II) intel(0): blueX: 0.150 blueY: 0.055   whiteX: 0.313 whiteY: 0.329
[    17.380] (II) intel(0): Manufacturer's mask: 0
[    17.380] (II) intel(0): Supported detailed timing:
[    17.380] (II) intel(0): clock: 69.3 MHz   Image Size:  344 x 194 mm
[    17.380] (II) intel(0): h_active: 1366  h_sync: 1402  h_sync_end 1442 h_blank_end 1480 h_border: 0
[    17.380] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 780 v_border: 0
[    17.380] (II) intel(0):  LG Display
[    17.380] (II) intel(0):  LP156WH4-TLC1
[    17.380] (II) intel(0): EDID (in hex):
[    17.380] (II) intel(0): 	00ffffffffffff0030e4f20200000000
[    17.380] (II) intel(0): 	00140103802213780a05859b5b549426
[    17.380] (II) intel(0): 	0e505400000001010101010101010101
[    17.380] (II) intel(0): 	010101010101121b567250000c302428
[    17.380] (II) intel(0): 	350058c2100000190000000000000000
[    17.380] (II) intel(0): 	00000000000000000000000000fe004c
[    17.380] (II) intel(0): 	4720446973706c61790a2020000000fe
[    17.380] (II) intel(0): 	004c503135365748342d544c433100ff
[    17.380] (II) intel(0): EDID vendor "LGD", prod id 754
[    17.381] (II) intel(0): Printing DDC gathered Modelines:
[    17.381] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1402 1442 1480  768 771 776 780 -hsync -vsync (46.8 kHz)
[    17.381] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    17.381] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    17.381] (II) intel(0): Printing probed modes for output LVDS1
[    17.381] (II) intel(0): Modeline "1366x768"x60.0   69.30  1366 1402 1442 1480  768 771 776 780 -hsync -vsync (46.8 kHz)
[    17.381] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz)
[    17.381] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz)
[    17.381] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    17.381] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    17.381] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    17.382] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    17.382] (II) intel(0): EDID for output VGA1
[    17.386] (II) intel(0): EDID for output HDMI1
[    17.436] (II) intel(0): EDID for output DP1
[    17.436] (II) intel(0): Output LVDS1 connected
[    17.436] (II) intel(0): Output VGA1 disconnected
[    17.436] (II) intel(0): Output HDMI1 disconnected
[    17.436] (II) intel(0): Output DP1 disconnected
[    17.436] (II) intel(0): Using exact sizes for initial modes
[    17.436] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    17.436] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    17.436] (II) intel(0): Kernel page flipping support detected, enabling
[    17.436] (**) intel(0): Display dimensions: (340, 190) mm
[    17.436] (**) intel(0): DPI set to (102, 102)
[    17.436] (II) Loading sub module "fb"
[    17.436] (II) LoadModule: "fb"
[    17.437] (II) Loading /usr/lib/xorg/modules/libfb.so
[    17.455] (II) Module fb: vendor="X.Org Foundation"
[    17.455] 	compiled for 1.11.3, module version = 1.0.0
[    17.455] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    17.455] (II) Loading sub module "dri2"
[    17.455] (II) LoadModule: "dri2"
[    17.456] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    17.456] (II) Module dri2: vendor="X.Org Foundation"
[    17.456] 	compiled for 1.11.3, module version = 1.2.0
[    17.456] 	ABI class: X.Org Server Extension, version 6.0
[    17.456] (II) UnloadModule: "vesa"
[    17.456] (II) Unloading vesa
[    17.456] (II) UnloadModule: "fbdev"
[    17.456] (II) Unloading fbdev
[    17.456] (II) UnloadModule: "fbdevhw"
[    17.456] (II) Unloading fbdevhw
[    17.456] (==) Depth 24 pixmap format is 32 bpp
[    17.457] (II) intel(0): [DRI2] Setup complete
[    17.457] (II) intel(0): [DRI2]   DRI driver: i965
[    17.457] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    17.478] (II) UXA(0): Driver registered support for the following operations:
[    17.478] (II)         solid
[    17.478] (II)         copy
[    17.478] (II)         composite (RENDER acceleration)
[    17.478] (II)         put_image
[    17.478] (II)         get_image
[    17.479] (==) intel(0): Backing store disabled
[    17.479] (==) intel(0): Silken mouse enabled
[    17.479] (II) intel(0): Initializing HW Cursor
[    17.548] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    17.551] (==) intel(0): DPMS enabled
[    17.551] (==) intel(0): Intel XvMC decoder enabled
[    17.551] (II) intel(0): Set up textured video
[    17.551] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    17.551] (II) intel(0): direct rendering: DRI2 Enabled
[    17.551] (==) intel(0): hotplug detection: "enabled"
[    17.551] (--) RandR disabled
[    17.551] (II) Initializing built-in extension Generic Event Extension
[    17.551] (II) Initializing built-in extension SHAPE
[    17.551] (II) Initializing built-in extension MIT-SHM
[    17.551] (II) Initializing built-in extension XInputExtension
[    17.551] (II) Initializing built-in extension XTEST
[    17.551] (II) Initializing built-in extension BIG-REQUESTS
[    17.552] (II) Initializing built-in extension SYNC
[    17.552] (II) Initializing built-in extension XKEYBOARD
[    17.552] (II) Initializing built-in extension XC-MISC
[    17.552] (II) Initializing built-in extension SECURITY
[    17.552] (II) Initializing built-in extension XINERAMA
[    17.552] (II) Initializing built-in extension XFIXES
[    17.552] (II) Initializing built-in extension RENDER
[    17.552] (II) Initializing built-in extension RANDR
[    17.552] (II) Initializing built-in extension COMPOSITE
[    17.552] (II) Initializing built-in extension DAMAGE
[    17.574] (EE) GLX error: Can not get required symbols.
[    17.574] (II) intel(0): Setting screen physical size to 361 x 203
[    17.656] (II) XKB: generating xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    18.020] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    18.021] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.021] (II) LoadModule: "evdev"
[    18.030] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.055] (II) Module evdev: vendor="X.Org Foundation"
[    18.055] 	compiled for 1.11.3, module version = 2.7.0
[    18.055] 	Module class: X.Org XInput Driver
[    18.055] 	ABI class: X.Org XInput driver, version 16.0
[    18.055] (II) Using input driver 'evdev' for 'Power Button'
[    18.055] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.055] (**) Power Button: always reports core events
[    18.055] (**) evdev: Power Button: Device: "/dev/input/event2"
[    18.055] (--) evdev: Power Button: Vendor 0 Product 0x1
[    18.055] (--) evdev: Power Button: Found keys
[    18.055] (II) evdev: Power Button: Configuring as keyboard
[    18.055] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    18.055] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    18.055] (**) Option "xkb_rules" "evdev"
[    18.055] (**) Option "xkb_model" "pc105"
[    18.055] (**) Option "xkb_layout" "fr"
[    18.056] (**) Option "xkb_variant" "oss"
[    18.061] (II) XKB: generating xkmfile /var/lib/xkb/server-6CCE7350BC740BB33D520367F4A10E64192A358C.xkm
[    18.185] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    18.185] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    18.185] (II) Using input driver 'evdev' for 'Video Bus'
[    18.185] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.186] (**) Video Bus: always reports core events
[    18.186] (**) evdev: Video Bus: Device: "/dev/input/event8"
[    18.186] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    18.186] (--) evdev: Video Bus: Found keys
[    18.186] (II) evdev: Video Bus: Configuring as keyboard
[    18.186] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8/event8"
[    18.186] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    18.186] (**) Option "xkb_rules" "evdev"
[    18.186] (**) Option "xkb_model" "pc105"
[    18.186] (**) Option "xkb_layout" "fr"
[    18.186] (**) Option "xkb_variant" "oss"
[    18.187] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    18.187] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    18.188] (II) Using input driver 'evdev' for 'Video Bus'
[    18.188] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.188] (**) Video Bus: always reports core events
[    18.188] (**) evdev: Video Bus: Device: "/dev/input/event7"
[    18.188] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    18.188] (--) evdev: Video Bus: Found keys
[    18.188] (II) evdev: Video Bus: Configuring as keyboard
[    18.188] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:17/LNXVIDEO:00/input/input7/event7"
[    18.188] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    18.188] (**) Option "xkb_rules" "evdev"
[    18.188] (**) Option "xkb_model" "pc105"
[    18.188] (**) Option "xkb_layout" "fr"
[    18.188] (**) Option "xkb_variant" "oss"
[    18.189] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    18.190] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.190] (II) Using input driver 'evdev' for 'Power Button'
[    18.190] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.190] (**) Power Button: always reports core events
[    18.190] (**) evdev: Power Button: Device: "/dev/input/event1"
[    18.190] (--) evdev: Power Button: Vendor 0 Product 0x1
[    18.190] (--) evdev: Power Button: Found keys
[    18.190] (II) evdev: Power Button: Configuring as keyboard
[    18.190] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    18.190] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    18.190] (**) Option "xkb_rules" "evdev"
[    18.190] (**) Option "xkb_model" "pc105"
[    18.190] (**) Option "xkb_layout" "fr"
[    18.190] (**) Option "xkb_variant" "oss"
[    18.191] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    18.192] (II) No input driver specified, ignoring this device.
[    18.192] (II) This device may have been added with another device file.
[    18.192] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[    18.192] (II) No input driver specified, ignoring this device.
[    18.192] (II) This device may have been added with another device file.
[    18.193] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[    18.193] (II) No input driver specified, ignoring this device.
[    18.193] (II) This device may have been added with another device file.
[    18.193] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[    18.193] (II) No input driver specified, ignoring this device.
[    18.193] (II) This device may have been added with another device file.
[    18.194] (II) config/udev: Adding input device HP Webcam-101 (/dev/input/event5)
[    18.194] (**) HP Webcam-101: Applying InputClass "evdev keyboard catchall"
[    18.194] (II) Using input driver 'evdev' for 'HP Webcam-101'
[    18.194] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.194] (**) HP Webcam-101: always reports core events
[    18.194] (**) evdev: HP Webcam-101: Device: "/dev/input/event5"
[    18.194] (--) evdev: HP Webcam-101: Vendor 0x5c8 Product 0x21e
[    18.194] (--) evdev: HP Webcam-101: Found keys
[    18.194] (II) evdev: HP Webcam-101: Configuring as keyboard
[    18.194] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input5/event5"
[    18.195] (II) XINPUT: Adding extended input device "HP Webcam-101" (type: KEYBOARD, id 10)
[    18.195] (**) Option "xkb_rules" "evdev"
[    18.195] (**) Option "xkb_model" "pc105"
[    18.195] (**) Option "xkb_layout" "fr"
[    18.195] (**) Option "xkb_variant" "oss"
[    18.196] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    18.196] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    18.196] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    18.196] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.196] (**) AT Translated Set 2 keyboard: always reports core events
[    18.196] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    18.197] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    18.197] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    18.197] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    18.197] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    18.197] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    18.197] (**) Option "xkb_rules" "evdev"
[    18.197] (**) Option "xkb_model" "pc105"
[    18.197] (**) Option "xkb_layout" "fr"
[    18.197] (**) Option "xkb_variant" "oss"
[    18.198] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[    18.198] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    18.198] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    18.198] (II) LoadModule: "synaptics"
[    18.199] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    18.268] (II) Module synaptics: vendor="X.Org Foundation"
[    18.268] 	compiled for 1.11.3, module version = 1.6.2
[    18.268] 	Module class: X.Org XInput Driver
[    18.268] 	ABI class: X.Org XInput driver, version 16.0
[    18.268] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    18.268] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    18.268] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    18.268] (**) Option "Device" "/dev/input/event6"
[    18.376] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    18.376] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5634
[    18.376] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4598
[    18.376] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    18.376] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    18.376] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    18.376] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    18.376] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    18.376] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    18.452] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[    18.452] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[    18.452] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    18.452] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    18.452] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[    18.453] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    18.453] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    18.453] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    18.453] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    18.453] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    18.453] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    18.453] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    18.458] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event4)
[    18.458] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    18.458] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    18.458] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.458] (**) HP WMI hotkeys: always reports core events
[    18.458] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event4"
[    18.458] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    18.458] (--) evdev: HP WMI hotkeys: Found keys
[    18.458] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    18.458] (**) Option "config_info" "udev:/sys/devices/virtual/input/input4/event4"
[    18.458] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[    18.458] (**) Option "xkb_rules" "evdev"
[    18.458] (**) Option "xkb_model" "pc105"
[    18.458] (**) Option "xkb_layout" "fr"
[    18.459] (**) Option "xkb_variant" "oss"
[    22.951] (II) intel(0): EDID vendor "LGD", prod id 754
[    22.951] (II) intel(0): Printing DDC gathered Modelines:
[    22.951] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1402 1442 1480  768 771 776 780 -hsync -vsync (46.8 kHz)
[    27.481] (II) XKB: generating xkmfile /var/lib/xkb/server-03AF3717FF3AB439A4BAABA686CCB40771CDF520.xkm
[    29.758] (II) XKB: generating xkmfile /var/lib/xkb/server-C4EEEB2339CB62D111EF0238C126FD797045434D.xkm
[    29.771] (II) XKB: reuse xkmfile /var/lib/xkb/server-C4EEEB2339CB62D111EF0238C126FD797045434D.xkm
[    32.429] (II) intel(0): EDID vendor "LGD", prod id 754
[    32.429] (II) intel(0): Printing DDC gathered Modelines:
[    32.429] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1402 1442 1480  768 771 776 780 -hsync -vsync (46.8 kHz)
[    50.713] (II) intel(0): EDID vendor "LGD", prod id 754
[    50.713] (II) intel(0): Printing DDC gathered Modelines:
[    50.713] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1402 1442 1480  768 771 776 780 -hsync -vsync (46.8 kHz)
[    66.677] (II) XKB: reuse xkmfile /var/lib/xkb/server-C4EEEB2339CB62D111EF0238C126FD797045434D.xkm
[   243.687] (II) XKB: reuse xkmfile /var/lib/xkb/server-C4EEEB2339CB62D111EF0238C126FD797045434D.xkm
[   243.693] (II) XKB: reuse xkmfile /var/lib/xkb/server-C4EEEB2339CB62D111EF0238C126FD797045434D.xkm
[   243.906] (II) XKB: reuse xkmfile /var/lib/xkb/server-C4EEEB2339CB62D111EF0238C126FD797045434D.xkm
[   243.913] (II) XKB: reuse xkmfile /var/lib/xkb/server-C4EEEB2339CB62D111EF0238C126FD797045434D.xkm
[   244.106] (II) XKB: reuse xkmfile /var/lib/xkb/server-C4EEEB2339CB62D111EF0238C126FD797045434D.xkm
[   244.115] (II) XKB: reuse xkmfile /var/lib/xkb/server-C4EEEB2339CB62D111EF0238C126FD797045434D.xkm
[   244.276] (II) XKB: reuse xkmfile /var/lib/xkb/server-C4EEEB2339CB62D111EF0238C126FD797045434D.xkm
[   244.283] (II) XKB: reuse xkmfile /var/lib/xkb/server-C4EEEB2339CB62D111EF0238C126FD797045434D.xkm
[   917.609] (II) intel(0): EDID vendor "LGD", prod id 754
[   917.609] (II) intel(0): Printing DDC gathered Modelines:
[   917.609] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1402 1442 1480  768 771 776 780 -hsync -vsync (46.8 kHz)
[ 13247.344] (II) XKB: reuse xkmfile /var/lib/xkb/server-C4EEEB2339CB62D111EF0238C126FD797045434D.xkm
[ 13976.101] (II) intel(0): EDID vendor "LGD", prod id 754
[ 13976.101] (II) intel(0): Printing DDC gathered Modelines:
[ 13976.101] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1402 1442 1480  768 771 776 780 -hsync -vsync (46.8 kHz)
[ 24152.140] (II) intel(0): EDID vendor "LGD", prod id 754
[ 24152.141] (II) intel(0): Printing DDC gathered Modelines:
[ 24152.141] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1402 1442 1480  768 771 776 780 -hsync -vsync (46.8 kHz)
[ 31094.372] (II) intel(0): EDID vendor "LGD", prod id 754
[ 31094.372] (II) intel(0): Printing DDC gathered Modelines:
[ 31094.372] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1402 1442 1480  768 771 776 780 -hsync -vsync (46.8 kHz)
[ 66748.977] (II) intel(0): EDID vendor "LGD", prod id 754
[ 66748.977] (II) intel(0): Printing DDC gathered Modelines:
[ 66748.977] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1402 1442 1480  768 771 776 780 -hsync -vsync (46.8 kHz)
[ 68212.139] (II) intel(0): EDID vendor "LGD", prod id 754
[ 68212.139] (II) intel(0): Printing DDC gathered Modelines:
[ 68212.139] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1402 1442 1480  768 771 776 780 -hsync -vsync (46.8 kHz)
[ 70793.297] (II) intel(0): EDID vendor "LGD", prod id 754
[ 70793.297] (II) intel(0): Printing DDC gathered Modelines:
[ 70793.297] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1402 1442 1480  768 771 776 780 -hsync -vsync (46.8 kHz)

Voilou si vous pouvez faire quelque chose

Dernière modification par cracottequitue (Le 23/09/2012, à 20:25)

Hors ligne

#2 Le 15/09/2012, à 12:23

fcn50

Re : [RESOLU]Install de pilote ATI

Salut,

Suit ce que je viens d'écrire au #4 ici:

http://forum.ubuntu-fr.org/viewtopic.php?id=1038131

Mais toi, télécharge le dernier (12.8) pilote.


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

Hors ligne

#3 Le 15/09/2012, à 14:05

cracottequitue

Re : [RESOLU]Install de pilote ATI

Bon j'ai suivi a la lettre le tuto d'install et rendu le pilote executable.
Premiere chose je ne peu pas choisir "automatic" dans l'interface mais "build package for detected os: ubuntu/precise".
Donc je selectionne ca. L'install a priori se fais. Et quand je ferme la fenetre "There errors during installation. Details can be found in /usr/share/ati/fglrx-install.log"
Je tente au cas ou sudo aticonfig --initial -f. Et la "sudo: aticonfig: command not found"

J'oubliais j'ai bien supprimer le fichier avec sudo apt-get remove fglrx*

Hors ligne

#4 Le 15/09/2012, à 15:00

fcn50

Re : [RESOLU]Install de pilote ATI

"There errors during installation. Details can be found in /usr/share/ati/fglrx-install.log" Poste le.


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

Hors ligne

#5 Le 15/09/2012, à 16:04

cracottequitue

Re : [RESOLU]Install de pilote ATI

Package build failed!
Package build utility output:
./packages/Ubuntu/ati-packager.sh: 294: ./packages/Ubuntu/ati-packager.sh: debclean: not found
dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security
dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): -D_FORTIFY_SOURCE=2
dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security
dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2
dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions -Wl,-z,relro
dpkg-buildpackage: source package fglrx-installer
dpkg-buildpackage: source version 2:8.982-0ubuntu1
dpkg-buildpackage: source changed by AMD: Advanced Micro Devices. <http://ati.amd.com/support/driver.html>
 dpkg-source --before-build fglrx.hYeooO
dpkg-buildpackage: host architecture i386
 debian/rules build
#Create important strings
for i in 10fglrx \
			 dkms.conf \
			 fglrx.install \
			 fglrx-dev.install \
			 fglrx-dev.links \
			 fglrx-amdcccle.install \
			 fglrx.grub-gfxpayload \
			 fglrx.dirs \
			 fglrx.links \
			 fglrx.postinst \
			 fglrx.postrm \
			 fglrx.preinst \
			 fglrx.prerm \
			 overrides/fglrx; do \
		sed -e "s|#PKGXMODDIR#|usr/lib/fglrx/xorg/modules|g" \
			-e "s|#LIBDIR#|usr/lib|g" \
			-e "s|#LIBDIR32#|usr/lib32|g" \
			-e "s|#BINDIR#|usr/bin|g" \
			-e "s|#SYSCONFDIR#|etc|g" \
			-e "s|#MANDIR#|usr/share/man/man1|g" \
			-e "s|#LDSOCONF#|usr/lib/fglrx/ld.so.conf|g" \
			-e "s|#ALTLDSOCONF#|usr/lib/fglrx/alt_ld.so.conf|g" \
			-e "s|#ALTPRIORITY#|1000|g" \
			-e "s|#PXALTPRIORITY#|900|g" \
			-e "s|#AUTOSTARTDIR#|etc/xdg/autostart|g" \
			-e "s|#DATADIR#|usr/share|g" \
			-e "s|#PKGDESKDIR#|usr/share/fglrx|g" \
			-e "s|#PKGDATADIR#|usr/share/fglrx|g" \
			-e "s|#PKGCONFIGDIR#|usr/lib/fglrx|g" \
			-e "s|#PKGBINDIR#|usr/lib/fglrx/bin|g" \
			-e "s|#PKGLIBDIR#|usr/lib/fglrx|g" \
			-e "s|#PKGLIBDIR32#|usr/lib32/fglrx|g" \
			-e "s|#PKGDRIVERSDIR#|usr/lib/fglrx/xorg|g" \
			-e "s|#XORGEXTRA#|usr/lib/i386-linux-gnu/xorg/extra-modules|g" \
			-e "s|#PKGEXTENSIONDIR#|usr/lib/fglrx/xorg|g" \
			-e "s|#XORGEXTENSIONSDIR#|usr/lib/xorg/modules/extensions|g" \
			-e "s|#DRIVERNAME#|fglrx|g" \
			-e "s|#DRIVERDEVNAME#|fglrx-dev|g" \
			-e "s|#DRIVERSRCNAME#||g" \
			-e "s|#INCLUDEDIR#|usr/include|g" \
			-e "s|#PKGLIBCONFDIR#|lib/fglrx|g" \
			-e "s|#GRUBBLKLISTDIR#|usr/share/grub-gfxpayload-lists/blacklist|g" \
			-e "s|#PKGXMODDIR#|usr/lib/fglrx/xorg/modules|g" \
			-e "s|#PXDIR#|usr/lib/pxpress|g" \
			-e "s|#PXDIR32#|usr/lib32/pxpress|g" \
			-e "s|#PXXMODDIR#|usr/lib/pxpress/xorg/modules|g" \
			-e "s|#PXDIRNAME#|pxpress|g" \
			-e "s|#PXLIBDIR#|usr/lib/pxpress/lib|g" \
			-e "s|#PXLIBDIR32#|usr/lib32/pxpress/lib|g" \
			-e "s|#PXLDSOCONF#|usr/lib/pxpress/ld.so.conf|g" \
			-e "s|#ALTPXLDSOCONF#|usr/lib/pxpress/alt_ld.so.conf|g" \
			-e "s|#CVERSION#|8.982|g" \
			-e "s|#SRCXARCH#|xpic|g" \
			-e "s|#SRCARCH#|x86|g" \
			-e "s|#SRCLIBDIR#|lib|g" \
			-e "s|#DEB_HOST_MULTIARCH#|i386-linux-gnu|g" \
			-e "s|#OTHER_ARCH#|x86_64-linux-gnu|g" \
			debian/$i.in > debian/$i;      \
	done
# remove exec bit on everything
find arch \
		etc \
		lib \
		module \
		usr \
		xpic     -type f | xargs chmod -x
find: `module': No such file or directory
# set executable on user apps
find arch/x86/usr/sbin \
		arch/x86/usr/X11R6/bin \
		usr/sbin/ -type f | xargs chmod a+x
# set exec bit on scripts
find lib etc debian -name "*.sh" -type f | xargs chmod +x
# set the permissions on the pxpress scripts
chmod 744 debian/pxpress/switch*
dh build
make: dh: Command not found
make: *** [build] Error 127
dpkg-buildpackage: error: debian/rules build gave error exit status 2
./packages/Ubuntu/ati-packager.sh: 294: ./packages/Ubuntu/ati-packager.sh: debclean: not found
dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security
dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): -D_FORTIFY_SOURCE=2
dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security
dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2
dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions -Wl,-z,relro
dpkg-buildpackage: source package fglrx-installer
dpkg-buildpackage: source version 2:8.982-0ubuntu1
dpkg-buildpackage: source changed by AMD: Advanced Micro Devices. <http://ati.amd.com/support/driver.html>
 dpkg-source --before-build fglrx.UpC7BU
dpkg-buildpackage: host architecture i386
 debian/rules build
#Create important strings
for i in 10fglrx \
			 dkms.conf \
			 fglrx.install \
			 fglrx-dev.install \
			 fglrx-dev.links \
			 fglrx-amdcccle.install \
			 fglrx.grub-gfxpayload \
			 fglrx.dirs \
			 fglrx.links \
			 fglrx.postinst \
			 fglrx.postrm \
			 fglrx.preinst \
			 fglrx.prerm \
			 overrides/fglrx; do \
		sed -e "s|#PKGXMODDIR#|usr/lib/fglrx/xorg/modules|g" \
			-e "s|#LIBDIR#|usr/lib|g" \
			-e "s|#LIBDIR32#|usr/lib32|g" \
			-e "s|#BINDIR#|usr/bin|g" \
			-e "s|#SYSCONFDIR#|etc|g" \
			-e "s|#MANDIR#|usr/share/man/man1|g" \
			-e "s|#LDSOCONF#|usr/lib/fglrx/ld.so.conf|g" \
			-e "s|#ALTLDSOCONF#|usr/lib/fglrx/alt_ld.so.conf|g" \
			-e "s|#ALTPRIORITY#|1000|g" \
			-e "s|#PXALTPRIORITY#|900|g" \
			-e "s|#AUTOSTARTDIR#|etc/xdg/autostart|g" \
			-e "s|#DATADIR#|usr/share|g" \
			-e "s|#PKGDESKDIR#|usr/share/fglrx|g" \
			-e "s|#PKGDATADIR#|usr/share/fglrx|g" \
			-e "s|#PKGCONFIGDIR#|usr/lib/fglrx|g" \
			-e "s|#PKGBINDIR#|usr/lib/fglrx/bin|g" \
			-e "s|#PKGLIBDIR#|usr/lib/fglrx|g" \
			-e "s|#PKGLIBDIR32#|usr/lib32/fglrx|g" \
			-e "s|#PKGDRIVERSDIR#|usr/lib/fglrx/xorg|g" \
			-e "s|#XORGEXTRA#|usr/lib/i386-linux-gnu/xorg/extra-modules|g" \
			-e "s|#PKGEXTENSIONDIR#|usr/lib/fglrx/xorg|g" \
			-e "s|#XORGEXTENSIONSDIR#|usr/lib/xorg/modules/extensions|g" \
			-e "s|#DRIVERNAME#|fglrx|g" \
			-e "s|#DRIVERDEVNAME#|fglrx-dev|g" \
			-e "s|#DRIVERSRCNAME#||g" \
			-e "s|#INCLUDEDIR#|usr/include|g" \
			-e "s|#PKGLIBCONFDIR#|lib/fglrx|g" \
			-e "s|#GRUBBLKLISTDIR#|usr/share/grub-gfxpayload-lists/blacklist|g" \
			-e "s|#PKGXMODDIR#|usr/lib/fglrx/xorg/modules|g" \
			-e "s|#PXDIR#|usr/lib/pxpress|g" \
			-e "s|#PXDIR32#|usr/lib32/pxpress|g" \
			-e "s|#PXXMODDIR#|usr/lib/pxpress/xorg/modules|g" \
			-e "s|#PXDIRNAME#|pxpress|g" \
			-e "s|#PXLIBDIR#|usr/lib/pxpress/lib|g" \
			-e "s|#PXLIBDIR32#|usr/lib32/pxpress/lib|g" \
			-e "s|#PXLDSOCONF#|usr/lib/pxpress/ld.so.conf|g" \
			-e "s|#ALTPXLDSOCONF#|usr/lib/pxpress/alt_ld.so.conf|g" \
			-e "s|#CVERSION#|8.982|g" \
			-e "s|#SRCXARCH#|xpic|g" \
			-e "s|#SRCARCH#|x86|g" \
			-e "s|#SRCLIBDIR#|lib|g" \
			-e "s|#DEB_HOST_MULTIARCH#|i386-linux-gnu|g" \
			-e "s|#OTHER_ARCH#|x86_64-linux-gnu|g" \
			debian/$i.in > debian/$i;      \
	done
# remove exec bit on everything
find arch \
		etc \
		lib \
		module \
		usr \
		xpic     -type f | xargs chmod -x
find: `module': No such file or directory
# set executable on user apps
find arch/x86/usr/sbin \
		arch/x86/usr/X11R6/bin \
		usr/sbin/ -type f | xargs chmod a+x
# set exec bit on scripts
find lib etc debian -name "*.sh" -type f | xargs chmod +x
# set the permissions on the pxpress scripts
chmod 744 debian/pxpress/switch*
dh build
make: dh: Command not found
make: *** [build] Error 127
dpkg-buildpackage: error: debian/rules build gave error exit status 2
./packages/Ubuntu/ati-packager.sh: 294: ./packages/Ubuntu/ati-packager.sh: debclean: not found
dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security
dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): -D_FORTIFY_SOURCE=2
dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security
dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2
dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions -Wl,-z,relro
dpkg-buildpackage: source package fglrx-installer
dpkg-buildpackage: source version 2:8.982-0ubuntu1
dpkg-buildpackage: source changed by AMD: Advanced Micro Devices. <http://ati.amd.com/support/driver.html>
 dpkg-source --before-build fglrx.x5FDap
dpkg-buildpackage: host architecture i386
 debian/rules build
#Create important strings
for i in 10fglrx \
			 dkms.conf \
			 fglrx.install \
			 fglrx-dev.install \
			 fglrx-dev.links \
			 fglrx-amdcccle.install \
			 fglrx.grub-gfxpayload \
			 fglrx.dirs \
			 fglrx.links \
			 fglrx.postinst \
			 fglrx.postrm \
			 fglrx.preinst \
			 fglrx.prerm \
			 overrides/fglrx; do \
		sed -e "s|#PKGXMODDIR#|usr/lib/fglrx/xorg/modules|g" \
			-e "s|#LIBDIR#|usr/lib|g" \
			-e "s|#LIBDIR32#|usr/lib32|g" \
			-e "s|#BINDIR#|usr/bin|g" \
			-e "s|#SYSCONFDIR#|etc|g" \
			-e "s|#MANDIR#|usr/share/man/man1|g" \
			-e "s|#LDSOCONF#|usr/lib/fglrx/ld.so.conf|g" \
			-e "s|#ALTLDSOCONF#|usr/lib/fglrx/alt_ld.so.conf|g" \
			-e "s|#ALTPRIORITY#|1000|g" \
			-e "s|#PXALTPRIORITY#|900|g" \
			-e "s|#AUTOSTARTDIR#|etc/xdg/autostart|g" \
			-e "s|#DATADIR#|usr/share|g" \
			-e "s|#PKGDESKDIR#|usr/share/fglrx|g" \
			-e "s|#PKGDATADIR#|usr/share/fglrx|g" \
			-e "s|#PKGCONFIGDIR#|usr/lib/fglrx|g" \
			-e "s|#PKGBINDIR#|usr/lib/fglrx/bin|g" \
			-e "s|#PKGLIBDIR#|usr/lib/fglrx|g" \
			-e "s|#PKGLIBDIR32#|usr/lib32/fglrx|g" \
			-e "s|#PKGDRIVERSDIR#|usr/lib/fglrx/xorg|g" \
			-e "s|#XORGEXTRA#|usr/lib/i386-linux-gnu/xorg/extra-modules|g" \
			-e "s|#PKGEXTENSIONDIR#|usr/lib/fglrx/xorg|g" \
			-e "s|#XORGEXTENSIONSDIR#|usr/lib/xorg/modules/extensions|g" \
			-e "s|#DRIVERNAME#|fglrx|g" \
			-e "s|#DRIVERDEVNAME#|fglrx-dev|g" \
			-e "s|#DRIVERSRCNAME#||g" \
			-e "s|#INCLUDEDIR#|usr/include|g" \
			-e "s|#PKGLIBCONFDIR#|lib/fglrx|g" \
			-e "s|#GRUBBLKLISTDIR#|usr/share/grub-gfxpayload-lists/blacklist|g" \
			-e "s|#PKGXMODDIR#|usr/lib/fglrx/xorg/modules|g" \
			-e "s|#PXDIR#|usr/lib/pxpress|g" \
			-e "s|#PXDIR32#|usr/lib32/pxpress|g" \
			-e "s|#PXXMODDIR#|usr/lib/pxpress/xorg/modules|g" \
			-e "s|#PXDIRNAME#|pxpress|g" \
			-e "s|#PXLIBDIR#|usr/lib/pxpress/lib|g" \
			-e "s|#PXLIBDIR32#|usr/lib32/pxpress/lib|g" \
			-e "s|#PXLDSOCONF#|usr/lib/pxpress/ld.so.conf|g" \
			-e "s|#ALTPXLDSOCONF#|usr/lib/pxpress/alt_ld.so.conf|g" \
			-e "s|#CVERSION#|8.982|g" \
			-e "s|#SRCXARCH#|xpic|g" \
			-e "s|#SRCARCH#|x86|g" \
			-e "s|#SRCLIBDIR#|lib|g" \
			-e "s|#DEB_HOST_MULTIARCH#|i386-linux-gnu|g" \
			-e "s|#OTHER_ARCH#|x86_64-linux-gnu|g" \
			debian/$i.in > debian/$i;      \
	done
# remove exec bit on everything
find arch \
		etc \
		lib \
		module \
		usr \
		xpic     -type f | xargs chmod -x
find: `module': No such file or directory
# set executable on user apps
find arch/x86/usr/sbin \
		arch/x86/usr/X11R6/bin \
		usr/sbin/ -type f | xargs chmod a+x
# set exec bit on scripts
find lib etc debian -name "*.sh" -type f | xargs chmod +x
# set the permissions on the pxpress scripts
chmod 744 debian/pxpress/switch*
dh build
make: dh: Command not found
make: *** [build] Error 127
dpkg-buildpackage: error: debian/rules build gave error exit status 2
./packages/Ubuntu/ati-packager.sh: 294: ./packages/Ubuntu/ati-packager.sh: debclean: not found
dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security
dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): -D_FORTIFY_SOURCE=2
dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security
dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2
dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions -Wl,-z,relro
dpkg-buildpackage: source package fglrx-installer
dpkg-buildpackage: source version 2:8.982-0ubuntu1
dpkg-buildpackage: source changed by AMD: Advanced Micro Devices. <http://ati.amd.com/support/driver.html>
 dpkg-source --before-build fglrx.9vZqvx
dpkg-buildpackage: host architecture i386
 debian/rules build
#Create important strings
for i in 10fglrx \
			 dkms.conf \
			 fglrx.install \
			 fglrx-dev.install \
			 fglrx-dev.links \
			 fglrx-amdcccle.install \
			 fglrx.grub-gfxpayload \
			 fglrx.dirs \
			 fglrx.links \
			 fglrx.postinst \
			 fglrx.postrm \
			 fglrx.preinst \
			 fglrx.prerm \
			 overrides/fglrx; do \
		sed -e "s|#PKGXMODDIR#|usr/lib/fglrx/xorg/modules|g" \
			-e "s|#LIBDIR#|usr/lib|g" \
			-e "s|#LIBDIR32#|usr/lib32|g" \
			-e "s|#BINDIR#|usr/bin|g" \
			-e "s|#SYSCONFDIR#|etc|g" \
			-e "s|#MANDIR#|usr/share/man/man1|g" \
			-e "s|#LDSOCONF#|usr/lib/fglrx/ld.so.conf|g" \
			-e "s|#ALTLDSOCONF#|usr/lib/fglrx/alt_ld.so.conf|g" \
			-e "s|#ALTPRIORITY#|1000|g" \
			-e "s|#PXALTPRIORITY#|900|g" \
			-e "s|#AUTOSTARTDIR#|etc/xdg/autostart|g" \
			-e "s|#DATADIR#|usr/share|g" \
			-e "s|#PKGDESKDIR#|usr/share/fglrx|g" \
			-e "s|#PKGDATADIR#|usr/share/fglrx|g" \
			-e "s|#PKGCONFIGDIR#|usr/lib/fglrx|g" \
			-e "s|#PKGBINDIR#|usr/lib/fglrx/bin|g" \
			-e "s|#PKGLIBDIR#|usr/lib/fglrx|g" \
			-e "s|#PKGLIBDIR32#|usr/lib32/fglrx|g" \
			-e "s|#PKGDRIVERSDIR#|usr/lib/fglrx/xorg|g" \
			-e "s|#XORGEXTRA#|usr/lib/i386-linux-gnu/xorg/extra-modules|g" \
			-e "s|#PKGEXTENSIONDIR#|usr/lib/fglrx/xorg|g" \
			-e "s|#XORGEXTENSIONSDIR#|usr/lib/xorg/modules/extensions|g" \
			-e "s|#DRIVERNAME#|fglrx|g" \
			-e "s|#DRIVERDEVNAME#|fglrx-dev|g" \
			-e "s|#DRIVERSRCNAME#||g" \
			-e "s|#INCLUDEDIR#|usr/include|g" \
			-e "s|#PKGLIBCONFDIR#|lib/fglrx|g" \
			-e "s|#GRUBBLKLISTDIR#|usr/share/grub-gfxpayload-lists/blacklist|g" \
			-e "s|#PKGXMODDIR#|usr/lib/fglrx/xorg/modules|g" \
			-e "s|#PXDIR#|usr/lib/pxpress|g" \
			-e "s|#PXDIR32#|usr/lib32/pxpress|g" \
			-e "s|#PXXMODDIR#|usr/lib/pxpress/xorg/modules|g" \
			-e "s|#PXDIRNAME#|pxpress|g" \
			-e "s|#PXLIBDIR#|usr/lib/pxpress/lib|g" \
			-e "s|#PXLIBDIR32#|usr/lib32/pxpress/lib|g" \
			-e "s|#PXLDSOCONF#|usr/lib/pxpress/ld.so.conf|g" \
			-e "s|#ALTPXLDSOCONF#|usr/lib/pxpress/alt_ld.so.conf|g" \
			-e "s|#CVERSION#|8.982|g" \
			-e "s|#SRCXARCH#|xpic|g" \
			-e "s|#SRCARCH#|x86|g" \
			-e "s|#SRCLIBDIR#|lib|g" \
			-e "s|#DEB_HOST_MULTIARCH#|i386-linux-gnu|g" \
			-e "s|#OTHER_ARCH#|x86_64-linux-gnu|g" \
			debian/$i.in > debian/$i;      \
	done
# remove exec bit on everything
find arch \
		etc \
		lib \
		module \
		usr \
		xpic     -type f | xargs chmod -x
find: `module': No such file or directory
# set executable on user apps
find arch/x86/usr/sbin \
		arch/x86/usr/X11R6/bin \
		usr/sbin/ -type f | xargs chmod a+x
# set exec bit on scripts
find lib etc debian -name "*.sh" -type f | xargs chmod +x
# set the permissions on the pxpress scripts
chmod 744 debian/pxpress/switch*
dh build
make: dh: Command not found
make: *** [build] Error 127
dpkg-buildpackage: error: debian/rules build gave error exit status 2
[Error] Generate Package - error generating package : Ubuntu/precise

Hors ligne

#6 Le 15/09/2012, à 16:51

fcn50

Re : [RESOLU]Install de pilote ATI

Après téléchargement du .deb AMD et extrait le .run il faut: clique droit dessus>permissions et coché exécuter comme un programme, l'as-tu fais avant de commencer l'install? Si non, fait le et recommence.


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

Hors ligne

#7 Le 15/09/2012, à 17:03

cracottequitue

Re : [RESOLU]Install de pilote ATI

Ben vi je l'ai fais sinon je n'aurais pas pus lance l'install
Ha oui et j'ai fais l'installation rapide

Dernière modification par cracottequitue (Le 15/09/2012, à 17:23)

Hors ligne

#8 Le 15/09/2012, à 17:26

chibbata

Re : [RESOLU]Install de pilote ATI

salut !

ton pc a 2 cartes graphiques:
une intel,integré dans le processeur core i3,i5 ou i7
et l'autre c'est la hd  Radeon HD 6400M
et dans ce cas c'est la puce intel qui est prioritaire, a moins d'avoir une option dans le bios permettant de choisir la radeon HD 6400M par defaut
ce topic peut t'aider http://forum.ubuntu-fr.org/viewtopic.php?id=924311
post le resultat de la commande

lspci

Dernière modification par chibbata (Le 15/09/2012, à 17:48)

Hors ligne

#9 Le 15/09/2012, à 17:40

cracottequitue

Re : [RESOLU]Install de pilote ATI

Houla je savais pas ca mouaaa

cracotte@cracotte-HP-Pavilion-g6-Notebook-PC:~$ lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:01.2 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Seymour [Radeon HD 6400M Series]
04:00.0 Network controller: Ralink corp. RT5390 Wireless 802.11n 1T/1R PCIe
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
06:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01)

Je vais regarde la page que tu indiques

Hors ligne

#10 Le 15/09/2012, à 17:52

chibbata

Re : [RESOLU]Install de pilote ATI

VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Seymour [Radeon HD 6400M Series]
comme tu vois,il ya bien 2 gpu dans ton portable et pour l'instant,linux ne peut pas faire la commutation automatique entre les 2 comme le fait windows

Dernière modification par chibbata (Le 15/09/2012, à 17:56)

Hors ligne

#11 Le 15/09/2012, à 18:05

cracottequitue

Re : [RESOLU]Install de pilote ATI

Alors quelle est la meilleure chose a faire?

Hors ligne

#12 Le 15/09/2012, à 18:56

fcn50

Re : [RESOLU]Install de pilote ATI

Effectivement, je n'avais pas deviné qu'il y avait cette histoire de GPU commutable et son lot de grimaces! Suivre le fil donné par chibbata, je ne suis pas à jour concernant ces configs à deux GPU.


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

Hors ligne

#13 Le 16/09/2012, à 03:40

cracottequitue

Re : [RESOLU]Install de pilote ATI

tu veux plutot parle du fil de alexislavie? Parce que celui de chibbata je vois pas le quel c'est!

Hors ligne

#14 Le 16/09/2012, à 07:29

fcn50

Re : [RESOLU]Install de pilote ATI

faucon50 a écrit :

Suivre le fil donné par chibbata

C'est bien ça, le fil que chibbata t'a donné en lien au #8, non le fil DE chibbata mais celui d'alexislavie. smile


14.04.1 LTS, Xfce 4.10.1, Phenom II x6 1090T BE, SSD Patriot Inferno 60 Go, WD Black 1 To, Sapphire HD 7750 ULTIMATE, RME HDSP 9632, Dell U2713HM.
Un site qui vaut le détour: http://blog.syti.net  Une radio hors du commun: http://solenopole.org  You like the american dream? Wellcome to Guantànamo!

Hors ligne

Haut de page ↑