Latex sur Ubuntu

altermundus · Le 03/04/2007, à 14:49

Salut

La documentation sur LateX me laisse un peu sceptique.

1) Tout d'abord s'il est vrai que tetex est abandonné, l'installation de TeXlive est celle d'une 2005 franchement vieillote surtout si on préfère travailler avec pdflatex.
Il serait intéressant de savoir comment on peut installer sans rien casser la nouvelle version de TXLive la 2007..
avec un pdftex 1.40.3 beamer en 3.07. Je sais que l'on peut installer tout cela à la main dans son texmf mais il est un peu dommage d'avoir un manager d'installation et de ne pouvoir sans servir.

2) Il est recommandé d'installer latex ucs pour travailler en utf8 moi il me semble que
\usepackage[utf8]{fontenc} est nettement préférable sauf si on est passionné par le grec ancien

Si quelqu'un a installé TL 2007 peut-il indiqué comment procéder ?

Ubuntu 7.04 va-t-il contenir TL 2007 ou bien suit-il comme un mouton Debian qui lui se prend pour une vraie tortue.... Comment savoir ce qu'il y a dans 7.04 ?

Merci pour tout renseignement !

altermundus · Le 03/04/2007, à 14:56

Je me réponds en partie sur http://packages.ubuntu.com/ il est signaleé que l'on reste avec une 2005 aussi je repose ma question:

Comment procéder pour installer la TL 2007 ?

Merci

Astier · Le 03/04/2007, à 14:59

Peut-être existe-t-il un dépôt avec la version 2007 ; personnellement, j'utilise la version dans les dépôts et je ne m'étais jamais vraiment posé ce genre de question, mais c'est vrai que j'ai une utilisation de Latex assez basique.

Pour l'utf8 personnellement j'utilise

\usepackage[utf8]{inputenc}

altermundus a écrit :

Salut
surtout si on préfère travailler avec pdflatex.

Il est où le rapport avec pdflatex ? Personnellement j'utilise la version des dépôts et rien ne m'empêche de compiler avec PDFLatex. Que veux-tu dire exactement ?

A bientôt

altermundus · Le 03/04/2007, à 22:49

Astier a écrit :

Peut-être existe-t-il un dépôt avec la version 2007 ; personnellement, j'utilise la version dans les dépôts et je ne m'étais jamais vraiment posé ce genre de question, mais c'est vrai que j'ai une utilisation de Latex assez basique.
Pour l'utf8 personnellement j'utilise
\usepackage[utf8]{inputenc}
altermundus a écrit :
Salut
surtout si on préfère travailler avec pdflatex.
Il est où le rapport avec pdflatex ? Personnellement j'utilise la version des dépôts et rien ne m'empêche de compiler avec PDFLatex. Que veux-tu dire exactement ?
A bientôt

Pour l'utf8 en effet c'est le mieux.

Pour le rapport, avec pdflatex c'est que maintenant le moteur officiel est pdfelatex appelé pdflatex.
La version est passée en 1.40 et apporte certaines fonctions pour le pdf. De plus avec TL, 2007 on libère un peu son texmf perso car certains packages progressent nettement : tikz/pdf, beamer, xkeyval par exemple

Altermundus

Astier · Le 03/04/2007, à 23:16

Ah en effet, intéressant

Pour savoir ce que Feisty intègre, je pense que tu peux aller là http://packages.ubuntu.com/feisty/ tu devrais trouver ton bonheur

Pour ce qui est d'un .deb j'ai trouvé ce lien en anglais : http://ubuntuforums.org/showthread.php?p=2386088 et peut être que ce forum http://forum.ubuntu-fr.org/viewtopic.php?pid=713500 peut t'être utile.

Tiens nous au courant

A bientôt

Dernière modification par Astier (Le 04/04/2007, à 01:15)

altermundus · Le 07/04/2007, à 20:24

Astier a écrit :

Ah en effet, intéressant
Pour savoir ce que Feisty intègre, je pense que tu peux aller là http://packages.ubuntu.com/feisty/ tu devrais trouver ton bonheur
Tiens nous au courant

Non pas le bonheur, c'est toujours en expérimental chez Debian, donc toujours 2005.
Alors je me suis entraîné sous 6.10 et j'ai installé TL 2007 à la main, je l'ai téléchargé
j'ai gravé l'iso j'ai créé un dossier sur le bureau et j'ai tout mis dedans...puis j'ai suivi les instructions....

Ensuite, j'ai compilé Kile à la main sinon il installe tetex c'est un peu le bordel....

Et cela fonctionne ...

Enfin la compilation nécessite quelques outils, c'est normal car Kile est sous KDE.
TeXMaker en revanche est hyper décevant!
il faut peut-être aller voir du côté de Scite

AlterMundus

altermundus · Le 07/04/2007, à 23:36

Je suis depuis passé sous 7.04 impecc tout semble fonctionner !!

no_spleen · Le 08/04/2007, à 13:36

Salut, tu peut me dire quels paquets tu as installé pour pouvoir compiler kile à la main s'il te plait? Je suis dans la même situation que toi...
Merci!

Luckynow · Le 08/04/2007, à 15:10

Tu pourrais faire un petit how-to sur le sujet ?
Qui présente les paquets à installer ou les sources.
Puis éventuellement comment paramétrer la compilation de kile pour éviter qu'il n'utilise tetex.

Dernière modification par Luckynow (Le 08/04/2007, à 15:11)

Astier · Le 08/04/2007, à 17:00

Personnellement, sous Feisty je tourne avec TexLive et Kile ne m'amène pas à installer tetex, il suffit simplement je pense d'installer texlive en premier lieu puis dans un second temps d'installer kile.

A+

Luckynow · Le 08/04/2007, à 17:33

ok merci

no_spleen · Le 08/04/2007, à 17:36

Ce serait bien de savoir les paquets à télécharger pour gérer les dépendances de kile lors de la compilation à la main. En effet moi j'ai installé texlive via un cd (je ne dispose pas d'une connection à haut débit) et j'aimerai compiler kile...

Luckynow · Le 08/04/2007, à 18:14

normalement si tu lance le .configure il te réclame des paquet à installer sinon il n ecompile pas, post ici le résultat de l'exécution du ./configure

no_spleen · Le 08/04/2007, à 18:34

Voila

checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking for -p flag to install... yes
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for kde-config... /usr/bin/kde-config
checking where to install... /usr (as returned by kde-config)
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether gcc is blacklisted... no
checking whether g++ supports -Wmissing-format-attribute... yes
checking whether gcc supports -Wmissing-format-attribute... yes
checking whether g++ supports -Wundef... yes
checking whether g++ supports -Wno-long-long... yes
checking whether g++ supports -Wno-non-virtual-dtor... yes
checking whether g++ supports -fno-reorder-blocks... yes
checking whether g++ supports -fno-exceptions... yes
checking whether g++ supports -fno-check-new... yes
checking whether g++ supports -fno-common... yes
checking whether g++ supports -fexceptions... yes
checking whether system headers can cope with -O2 -fno-inline... irrelevant
checking how to run the C++ preprocessor... g++ -E
checking whether g++ supports -O0... yes
checking whether g++ supports -Wl,--no-undefined... yes
checking whether g++ supports -Wl,--allow-shlib-undefined... yes
not using lib directory suffix
checking for a sed that does not truncate output... /bin/sed
checking for egrep... grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g77... no
checking for f77... no
checking for xlf... no
checking for frt... no
checking for pgf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for f90... no
checking for xlf90... no
checking for pgf90... no
checking for epcf90... no
checking for f95... f95
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether f95 accepts -g... yes
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag  works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dlopen... (cached) no
checking for dlopen in -ldl... (cached) yes
checking whether a program can dlopen itself... (cached) yes
checking whether a statically linked program can dlopen itself... (cached) yes
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for f95 option to produce PIC... -fPIC
checking if f95 PIC flag -fPIC works... yes
checking if f95 supports -c -o file.o... yes
checking whether the f95 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking if C++ programs can be compiled... yes
checking for strlcat... no
checking if strlcat needs custom prototype... yes - in libkdefakes
checking for strlcpy... no
checking if strlcpy needs custom prototype... yes - in libkdefakes
checking for main in -lutil... yes
checking for main in -lcompat... no
checking for crypt in -lcrypt... yes
checking for socklen_t... yes
checking for dnet_ntoa in -ldnet... no
checking for dnet_ntoa in -ldnet_stub... no
checking for inet_ntoa... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for sys/types.h... (cached) yes
checking for stdint.h... (cached) yes
checking sys/bitypes.h usability... yes
checking sys/bitypes.h presence... yes
checking for sys/bitypes.h... yes
checking for poll in -lpoll... no
checking Carbon/Carbon.h usability... no
checking Carbon/Carbon.h presence... no
checking for Carbon/Carbon.h... no
checking CoreAudio/CoreAudio.h usability... no
checking CoreAudio/CoreAudio.h presence... no
checking for CoreAudio/CoreAudio.h... no
checking if res_init needs -lresolv... yes
checking for res_init... yes
checking if res_init needs custom prototype... no
checking for killpg in -lucb... no
checking for int... yes
checking size of int... 4
checking for short... yes
checking size of short... 2
checking for long... yes
checking size of long... 4
checking for char *... yes
checking size of char *... 4
checking for dlopen in -ldl... (cached) yes
checking for shl_unload in -ldld... no
checking for size_t... yes
checking size of size_t... 4
checking for unsigned long... yes
checking size of unsigned long... 4
checking sizeof size_t == sizeof unsigned long... yes
checking for PIE support... yes
checking if enabling -pie/fPIE support... yes
checking crt_externs.h usability... no
checking crt_externs.h presence... no
checking for crt_externs.h... no
checking for _NSGetEnviron... no
checking for vsnprintf... yes
checking for snprintf... yes
checking for X... configure: error: Can't find X includes. Please check your installation and add the correct paths!

Luckynow · Le 08/04/2007, à 19:52

il échoue parce que les paquet xorg-dev ne sont pas installé.
En fait regarde chaque fin de ligne, Dans le cas ci dessus, il s'agit de X et il te faut les paquet de développement de X.
Garde synaptic d'ouvert, ça m'étonnerais qu'il ne te manque que ça.

altermundus · Le 09/04/2007, à 08:53

Luckynow a écrit :

il échoue parce que les paquet xorg-dev ne sont pas installé.
En fait regarde chaque fin de ligne, Dans le cas ci dessus, il s'agit de X et il te faut les paquet de développement de X.
Garde synaptic d'ouvert, ça m'étonnerais qu'il ne te manque que ça.

Je réponds à plusieurs messages en même temps.
a) Sur le dernier, je dirais non : xorg-dev n'est pas installé chez moi

b) J'ai installé TeXlive à partir du CD en premier puis je suis allé dans synaptic et j'ai voulu installé kile. Là je suppose qu'il y a un système de dépendance et il me propose à chaque fois tetex. J'ai réussi une fois à m'en passer mais il y a quelques mois après avoir installé un des fichiers de la texlive mais..navré j'ai oublié lequel...
Cela dit, la compilation de kile permet d'avoir la 1.9.3

c) ensuite je ne suis pas un linuxien pur souche aussi je fais comme je peux donc mes explications ne seront pas forcément très clair.

En gros je procède comme il vient d'être dit, je regarde l'erreur dans le fichier log et je vais dans synaptic recherché ce qui manque :
Je suis sur Ubuntu avec Gnome
1) on télécharge les sources de kile
2 ) On extrait le paquet sur le bureau
3) On ouvre une console (la aussi Konsole de KDE est préférable, c'est mieus foutu) Par exemple, je glisse un fichier du dossier kile dans la Konsole, je choisis cd et je saute l'étape suivante.
4) cd .... le dossier de kile
5) Also to compile Kile you need to install the development packages for KDE 3.3
and Qt 3.3 as well.

avant de configurer il faut quelques outils de développement entre autres :

* KDE development package dans synpatic
kdelibs4-dev (pas sûr)
kdelibs-data
kde-i1-n-fr
kdegraphics-dev
kdebase
kdebase-bin
kdebase-dev
kdebase-data

Au passage un regret, il pourrait y avoir comme sur certaines distrib, un paquet appelé gnome dev ou kde dev , un clic et hop pas à se galérer.

ensuite QT3 dev
qt3-dev-tools etc... libqt3-headers... en général si il manque quelque chose c'est assez explicite...on va dans synaptic recherche qt3.... et on essaie...

ensuite un compilateur gcc (comme j'ai compilé pas mal de trucs j'ai la collection g77 gcc-3.3 3.4 4.1 etc...
mais même chose en cas de pépin, ce sera explicite...

6 ) Passons aux choses sérieuses : les trucs qui parfois donnent mal à la tête :

sudo ./configure --prefix=/usr/lib/kde3 --with-qt-dir=/usr/lib/qt3

attention c'est comme cela chez moi
la doc dit :
./configure --prefix=path to KDE3 (/usr or /opt/kde3 generally) --with-qt-dir=path to the QT3 library (/usr/lib/qt3 generally)

pour KDE le mieux c'est de faire : kde-config --prefix et vous saurez où il se cache
pour qt3 c'est en général /usr/lib

on lance

7 ) make
8) sudo make install

et voilà je vous passe une partie du log qui peut vous servir

This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by configure, which was
generated by GNU Autoconf 2.59.  Invocation command line was

  $ ./configure --prefix=/etc --with-qt-dir=/usr/lib/qt3

## --------- ##
## Platform. ##
## --------- ##

hostname = ubuntu
uname -m = i686
uname -r = 2.6.17-11-generic
uname -s = Linux
uname -v = #2 SMP Thu Feb 1 19:52:28 UTC 2007

/usr/bin/uname -p = unknown
/bin/uname -X     = unknown

/bin/arch              = i686
/usr/bin/arch -k       = unknown
/usr/convex/getsysinfo = unknown
hostinfo               = unknown
/bin/machine           = unknown
/usr/bin/oslevel       = unknown
/bin/universe          = unknown

PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/X11R6/bin


## ----------- ##
## Core tests. ##
## ----------- ##

configure:1564: checking build system type
configure:1582: result: i686-pc-linux-gnu
configure:1590: checking host system type
configure:1604: result: i686-pc-linux-gnu
configure:1612: checking target system type
configure:1626: result: i686-pc-linux-gnu
configure:1673: checking for a BSD-compatible install
configure:1728: result: /usr/bin/install -c
configure:1743: checking for -p flag to install
configure:1756: result: yes
configure:1767: checking whether build environment is sane
configure:1810: result: yes
configure:1862: checking for gawk
configure:1891: result: no
configure:1862: checking for mawk
configure:1878: found /usr/bin/mawk
configure:1888: result: mawk
configure:1898: checking whether make sets $(MAKE)
configure:1918: result: yes
configure:2176: checking for kde-config
configure:2238: result: /usr/bin/kde-config
configure:2261: checking where to install
configure:2269: result: /etc (as requested)
configure:2320: checking for style of include used by make
configure:2348: result: GNU
configure:2496: checking for gcc
configure:2512: found /usr/bin/gcc
configure:2522: result: gcc
configure:2766: checking for C compiler version
configure:2769: gcc --version </dev/null >&5
gcc (GCC) 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:2772: $? = 0
configure:2774: gcc -v </dev/null >&5
Using built-in specs.
Target: i486-linux-gnu
Configured with: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --program-suffix=-4.1 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --enable-checking=release i486-linux-gnu
Thread model: posix
gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)
configure:2777: $? = 0
configure:2779: gcc -V </dev/null >&5
gcc: '-V' option must have argument
configure:2782: $? = 1
configure:2805: checking for C compiler default output file name
configure:2808: gcc     conftest.c  >&5
configure:2811: $? = 0
configure:2857: result: a.out
configure:2862: checking whether the C compiler works
configure:2868: ./a.out
configure:2871: $? = 0
configure:2888: result: yes
configure:2895: checking whether we are cross compiling
configure:2897: result: no
configure:2900: checking for suffix of executables
configure:2902: gcc -o conftest     conftest.c  >&5
configure:2905: $? = 0
configure:2930: result: 
configure:2936: checking for suffix of object files
configure:2957: gcc -c    conftest.c >&5
configure:2960: $? = 0
configure:2982: result: o
configure:2986: checking whether we are using the GNU C compiler
configure:3010: gcc -c    conftest.c >&5
configure:3016: $? = 0
configure:3019: test -z 			 || test ! -s conftest.err
configure:3022: $? = 0
configure:3025: test -s conftest.o
configure:3028: $? = 0
configure:3041: result: yes
configure:3047: checking whether gcc accepts -g
configure:3068: gcc -c -g  conftest.c >&5
configure:3074: $? = 0
configure:3077: test -z 			 || test ! -s conftest.err
configure:3080: $? = 0
configure:3083: test -s conftest.o
configure:3086: $? = 0
configure:3097: result: yes
configure:3114: checking for gcc option to accept ANSI C
configure:3184: gcc  -c    conftest.c >&5
configure:3190: $? = 0
configure:3193: test -z 			 || test ! -s conftest.err
configure:3196: $? = 0
configure:3199: test -s conftest.o
configure:3202: $? = 0
configure:3220: result: none needed
configure:3238: gcc -c    conftest.c >&5
conftest.c:2: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'me'
configure:3244: $? = 1
configure: failed program was:
| #ifndef __cplusplus
|   choke me
| #endif
configure:3376: checking dependency style of gcc
configure:3466: result: gcc3
configure:3489: checking how to run the C preprocessor
configure:3524: gcc -E  conftest.c
configure:3530: $? = 0
configure:3562: gcc -E  conftest.c
conftest.c:11:28: error: ac_nonexistent.h: No such file or directory
configure:3568: $? = 1
configure: failed program was:
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kile-1.9.3"
| #define VERSION "3.5.5"
| /* end confdefs.h.  */
| #include <ac_nonexistent.h>
configure:3607: result: gcc -E
configure:3631: gcc -E  conftest.c
configure:3637: $? = 0
configure:3669: gcc -E  conftest.c
conftest.c:11:28: error: ac_nonexistent.h: No such file or directory
configure:3675: $? = 1
configure: failed program was:
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kile-1.9.3"
| #define VERSION "3.5.5"
| /* end confdefs.h.  */
| #include <ac_nonexistent.h>
configure:3799: checking for g++
configure:3815: found /usr/bin/g++
configure:3825: result: g++
configure:3841: checking for C++ compiler version
configure:3844: g++ --version </dev/null >&5
g++ (GCC) 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:3847: $? = 0
configure:3849: g++ -v </dev/null >&5
Using built-in specs.
Target: i486-linux-gnu
Configured with: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --program-suffix=-4.1 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --enable-checking=release i486-linux-gnu
Thread model: posix
gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)
configure:3852: $? = 0
configure:3854: g++ -V </dev/null >&5
g++: '-V' option must have argument
configure:3857: $? = 1
configure:3860: checking whether we are using the GNU C++ compiler
configure:3884: g++ -c    conftest.cc >&5
configure:3890: $? = 0
configure:3893: test -z 			 || test ! -s conftest.err
configure:3896: $? = 0
configure:3899: test -s conftest.o
configure:3902: $? = 0
configure:3915: result: yes
configure:3921: checking whether g++ accepts -g
configure:3942: g++ -c -g  conftest.cc >&5
configure:3948: $? = 0
configure:3951: test -z 			 || test ! -s conftest.err
configure:3954: $? = 0
configure:3957: test -s conftest.o
configure:3960: $? = 0
configure:3971: result: yes
configure:4013: g++ -c    conftest.cc >&5
configure:4019: $? = 0
configure:4022: test -z 			 || test ! -s conftest.err
configure:4025: $? = 0
configure:4028: test -s conftest.o
configure:4031: $? = 0
configure:4057: g++ -c    conftest.cc >&5
conftest.cc: In function 'int main()':
conftest.cc:15: error: 'exit' was not declared in this scope
configure:4063: $? = 1
configure: failed program was:
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kile-1.9.3"
| #define VERSION "3.5.5"
| /* end confdefs.h.  */
| 
| int
| main ()
| {
| exit (42);
|   ;
|   return 0;
| }
configure:4013: g++ -c    conftest.cc >&5
configure:4019: $? = 0
configure:4022: test -z 			 || test ! -s conftest.err
configure:4025: $? = 0
configure:4028: test -s conftest.o
configure:4031: $? = 0
configure:4057: g++ -c    conftest.cc >&5
configure:4063: $? = 0
configure:4066: test -z 			 || test ! -s conftest.err
configure:4069: $? = 0
configure:4072: test -s conftest.o
configure:4075: $? = 0
configure:4100: checking dependency style of g++
configure:4190: result: gcc3
configure:4209: checking whether gcc is blacklisted
configure:4235: gcc -c -O2    conftest.c >&5
configure:4241: $? = 0
configure:4244: test -z 			 || test ! -s conftest.err
configure:4247: $? = 0
configure:4250: test -s conftest.o
configure:4253: $? = 0
configure:4265: result: no
configure:4599: checking whether g++ supports -Wmissing-format-attribute
configure:4635: rm -rf SunWS_cache; g++ -o conftest -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -O2   -Wmissing-format-attribute   conftest.cc  1>&5
configure:4641: $? = 0
configure:4644: test -z 			 || test ! -s conftest.err
configure:4647: $? = 0
configure:4650: test -s conftest
configure:4653: $? = 0
configure:4674: result: yes
configure:4686: checking whether gcc supports -Wmissing-format-attribute
configure:4719: gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wmissing-format-attribute   conftest.c  >&5
configure:4725: $? = 0
configure:4728: test -z 			 || test ! -s conftest.err
configure:4731: $? = 0
configure:4734: test -s conftest
configure:4737: $? = 0
configure:4758: result: yes
configure:4772: checking whether g++ supports -Wundef
configure:4808: rm -rf SunWS_cache; g++ -o conftest -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -O2   -Wformat-security -Wmissing-format-attribute -Wundef   conftest.cc  1>&5
configure:4814: $? = 0
configure:4817: test -z 			 || test ! -s conftest.err
configure:4820: $? = 0
configure:4823: test -s conftest
configure:4826: $? = 0
configure:4847: result: yes
configure:4859: checking whether g++ supports -Wno-long-long
configure:4895: rm -rf SunWS_cache; g++ -o conftest -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -O2   -Wformat-security -Wmissing-format-attribute -Wno-long-long   conftest.cc  1>&5
configure:4901: $? = 0
configure:4904: test -z 			 || test ! -s conftest.err
configure:4907: $? = 0
configure:4910: test -s conftest
configure:4913: $? = 0
configure:4934: result: yes
configure:4946: checking whether g++ supports -Wno-non-virtual-dtor
configure:4982: rm -rf SunWS_cache; g++ -o conftest -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -O2   -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor   conftest.cc  1>&5
configure:4988: $? = 0
configure:4991: test -z 			 || test ! -s conftest.err
configure:4994: $? = 0
configure:4997: test -s conftest
configure:5000: $? = 0
configure:5021: result: yes
configure:5053: checking whether g++ supports -fno-reorder-blocks
configure:5089: rm -rf SunWS_cache; g++ -o conftest -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -O2   -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-reorder-blocks   conftest.cc  1>&5
configure:5095: $? = 0
configure:5098: test -z 			 || test ! -s conftest.err
configure:5101: $? = 0
configure:5104: test -s conftest
configure:5107: $? = 0
configure:5128: result: yes
configure:5146: checking whether g++ supports -fno-exceptions
configure:5182: rm -rf SunWS_cache; g++ -o conftest -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -O2   -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions   conftest.cc  1>&5
configure:5188: $? = 0
configure:5191: test -z 			 || test ! -s conftest.err
configure:5194: $? = 0
configure:5197: test -s conftest
configure:5200: $? = 0
configure:5221: result: yes
configure:5233: checking whether g++ supports -fno-check-new
configure:5269: rm -rf SunWS_cache; g++ -o conftest -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -O2   -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new   conftest.cc  1>&5
configure:5275: $? = 0
configure:5278: test -z 			 || test ! -s conftest.err
configure:5281: $? = 0
configure:5284: test -s conftest
configure:5287: $? = 0
configure:5308: result: yes
configure:5320: checking whether g++ supports -fno-common
configure:5356: rm -rf SunWS_cache; g++ -o conftest -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -O2   -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common   conftest.cc  1>&5
configure:5362: $? = 0
configure:5365: test -z 			 || test ! -s conftest.err
configure:5368: $? = 0
configure:5371: test -s conftest
configure:5374: $? = 0
configure:5395: result: yes
configure:5407: checking whether g++ supports -fexceptions
configure:5443: rm -rf SunWS_cache; g++ -o conftest -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -O2   -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -fexceptions   conftest.cc  1>&5
configure:5449: $? = 0
configure:5452: test -z 			 || test ! -s conftest.err
configure:5455: $? = 0
configure:5458: test -s conftest
configure:5461: $? = 0
configure:5482: result: yes
configure:5525: checking whether system headers can cope with -O2 -fno-inline
configure:5593: result: irrelevant
configure:6243: checking how to run the C++ preprocessor
configure:6274: g++ -E  conftest.cc
configure:6280: $? = 0
configure:6312: g++ -E  conftest.cc
conftest.cc:14:28: error: ac_nonexistent.h: No such file or directory
configure:6318: $? = 1
configure: failed program was:
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kile-1.9.3"
| #define VERSION "3.5.5"
| #ifdef __cplusplus
| extern "C" void std::exit (int) throw (); using std::exit;
| #endif
| /* end confdefs.h.  */
| #include <ac_nonexistent.h>
configure:6357: result: g++ -E
configure:6381: g++ -E  conftest.cc
configure:6387: $? = 0
configure:6419: g++ -E  conftest.cc
conftest.cc:14:28: error: ac_nonexistent.h: No such file or directory
configure:6425: $? = 1
configure: failed program was:
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kile-1.9.3"
| #define VERSION "3.5.5"
| #ifdef __cplusplus
| extern "C" void std::exit (int) throw (); using std::exit;
| #endif
| /* end confdefs.h.  */
| #include <ac_nonexistent.h>
configure:6473: checking whether g++ supports -O0
configure:6509: rm -rf SunWS_cache; g++ -o conftest -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -O0   conftest.cc  1>&5
configure:6515: $? = 0
configure:6518: test -z 			 || test ! -s conftest.err
configure:6521: $? = 0
configure:6524: test -s conftest
configure:6527: $? = 0
configure:6548: result: yes
configure:6817: checking whether g++ supports -Wl,--no-undefined
configure:6853: rm -rf SunWS_cache; g++ -o conftest -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -Wl,--no-undefined   conftest.cc  1>&5
configure:6859: $? = 0
configure:6862: test -z 			 || test ! -s conftest.err
configure:6865: $? = 0
configure:6868: test -s conftest
configure:6871: $? = 0
configure:6892: result: yes
configure:6896: checking whether g++ supports -Wl,--allow-shlib-undefined
configure:6932: rm -rf SunWS_cache; g++ -o conftest -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -Wl,--allow-shlib-undefined   conftest.cc  1>&5
configure:6938: $? = 0
configure:6941: test -z 			 || test ! -s conftest.err
configure:6944: $? = 0
configure:6947: test -s conftest
configure:6950: $? = 0
configure:6971: result: yes
configure:7096: result: not using lib directory suffix
configure:7141: checking for a sed that does not truncate output
configure:7195: result: /bin/sed
configure:7198: checking for egrep
configure:7208: result: grep -E
configure:7224: checking for ld used by gcc
configure:7291: result: /usr/bin/ld
configure:7300: checking if the linker (/usr/bin/ld) is GNU ld
configure:7315: result: yes
configure:7320: checking for /usr/bin/ld option to reload object files
configure:7327: result: -r
configure:7336: checking for BSD-compatible nm
configure:7378: result: /usr/bin/nm -B
configure:7382: checking whether ln -s works
configure:7386: result: yes
configure:7393: checking how to recognise dependent libraries
configure:7600: result: pass_all
configure:7808: checking for ANSI C header files
configure:7833: gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
configure:7839: $? = 0
configure:7842: test -z 			 || test ! -s conftest.err
configure:7845: $? = 0
configure:7848: test -s conftest.o
configure:7851: $? = 0
configure:7940: gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c  >&5
conftest.c: In function 'main':
conftest.c:32: warning: implicit declaration of function 'exit'
conftest.c:32: warning: incompatible implicit declaration of built-in function 'exit'
configure:7943: $? = 0
configure:7945: ./conftest
configure:7948: $? = 0
configure:7963: result: yes
configure:7987: checking for sys/types.h
configure:8003: gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
configure:8009: $? = 0
configure:8012: test -z 			 || test ! -s conftest.err
configure:8015: $? = 0
configure:8018: test -s conftest.o
configure:8021: $? = 0
configure:8032: result: yes
configure:7987: checking for sys/stat.h
configure:8003: gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
configure:8009: $? = 0
configure:8012: test -z 			 || test ! -s conftest.err
configure:8015: $? = 0
configure:8018: test -s conftest.o
configure:8021: $? = 0
configure:8032: result: yes
configure:7987: checking for stdlib.h
configure:8003: gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
configure:8009: $? = 0
configure:8012: test -z 			 || test ! -s conftest.err
configure:8015: $? = 0
configure:8018: test -s conftest.o
configure:8021: $? = 0
configure:8032: result: yes
configure:7987: checking for string.h
configure:8003: gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
configure:8009: $? = 0
configure:8012: test -z 			 || test ! -s conftest.err
configure:8015: $? = 0
configure:8018: test -s conftest.o
configure:8021: $? = 0
configure:8032: result: yes
configure:7987: checking for memory.h
configure:8003: gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
configure:8009: $? = 0
configure:8012: test -z 			 || test ! -s conftest.err
configure:8015: $? = 0
configure:8018: test -s conftest.o
configure:8021: $? = 0
configure:8032: result: yes
configure:7987: checking for strings.h
configure:8003: gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
configure:8009: $? = 0
configure:8012: test -z 			 || test ! -s conftest.err
configure:8015: $? = 0
configure:8018: test -s conftest.o
configure:8021: $? = 0
configure:8032: result: yes
configure:7987: checking for inttypes.h
configure:8003: gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
configure:8009: $? = 0
configure:8012: test -z 			 || test ! -s conftest.err
configure:8015: $? = 0
configure:8018: test -s conftest.o
configure:8021: $? = 0
configure:8032: result: yes
configure:7987: checking for stdint.h
configure:8003: gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
configure:8009: $? = 0
configure:8012: test -z 			 || test ! -s conftest.err
configure:8015: $? = 0
configure:8018: test -s conftest.o
configure:8021: $? = 0
configure:8032: result: yes
configure:7987: checking for unistd.h
configure:8003: gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
configure:8009: $? = 0
configure:8012: test -z 			 || test ! -s conftest.err
configure:8015: $? = 0
configure:8018: test -s conftest.o
configure:8021: $? = 0
configure:8032: result: yes
configure:8058: checking dlfcn.h usability
configure:8070: gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
configure:8076: $? = 0
configure:8079: test -z 			 || test ! -s conftest.err
configure:8082: $? = 0
configure:8085: test -s conftest.o
configure:8088: $? = 0
configure:8098: result: yes
configure:8102: checking dlfcn.h presence
configure:8112: gcc -E  conftest.c
configure:8118: $? = 0
configure:8138: result: yes
configure:8173: checking for dlfcn.h
configure:8180: result: yes
configure:8244: checking for g77
configure:8260: found /usr/bin/g77
configure:8270: result: g77
configure:8285: checking for Fortran 77 compiler version
configure:8288: g77 --version </dev/null >&5
GNU Fortran (GCC) 3.4.6 (Ubuntu 3.4.6-3ubuntu1)
Copyright (C) 2006 Free Software Foundation, Inc.

GNU Fortran comes with NO WARRANTY, to the extent permitted by law.
You may redistribute copies of GNU Fortran
under the terms of the GNU General Public License.
For more information about these matters, see the file named COPYING
or type the command `info -f g77 Copying'.
configure:8291: $? = 0
configure:8293: g77 -v </dev/null >&5
Reading specs from /usr/lib/gcc/i486-linux-gnu/3.4.6/specs
Configured with: ../src/configure -v --enable-languages=c,c++,f77,pascal --prefix=/usr --libexecdir=/usr/lib --with-gxx-include-dir=/usr/include/c++/3.4 --enable-shared --with-system-zlib --enable-nls --without-included-gettext --program-suffix=-3.4 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --with-tune=pentium4 i486-linux-gnu
Thread model: posix
gcc version 3.4.6 (Ubuntu 3.4.6-3ubuntu1)
configure:8296: $? = 0
configure:8298: g77 -V </dev/null >&5
g77: `-V' option must have argument
configure:8301: $? = 1
configure:8309: checking whether we are using the GNU Fortran 77 compiler
configure:8323: g77 -c  conftest.F >&5
configure:8329: $? = 0
configure:8332: test -z 			 || test ! -s conftest.err
configure:8335: $? = 0
configure:8338: test -s conftest.o
configure:8341: $? = 0
configure:8354: result: yes
configure:8360: checking whether g77 accepts -g
configure:8372: g77 -c -g conftest.f >&5
configure:8378: $? = 0
configure:8381: test -z 			 || test ! -s conftest.err
configure:8384: $? = 0
configure:8387: test -s conftest.o
configure:8390: $? = 0
configure:8402: result: yes
configure:8432: checking the maximum length of command line arguments
configure:8491: result: 32768
configure:8502: checking command to parse /usr/bin/nm -B output from gcc object
configure:8591: gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
conftest.c:5: warning: no previous prototype for 'nm_test_func'
configure:8594: $? = 0
configure:8598: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ 	]\([ABCDGISTW][ABCDGISTW]*\)[ 	][ 	]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' \> conftest.nm
configure:8601: $? = 0
configure:8653: gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c conftstm.o >&5
configure:8656: $? = 0
configure:8694: result: ok
configure:8698: checking for objdir
configure:8713: result: .libs
configure:8803: checking for ar
configure:8819: found /usr/bin/ar
configure:8830: result: ar
configure:8883: checking for ranlib
configure:8899: found /usr/bin/ranlib
configure:8910: result: ranlib
configure:8963: checking for strip
configure:8979: found /usr/bin/strip
configure:8990: result: strip
configure:9252: checking if gcc static flag  works
configure:9275: result: yes
configure:9297: checking if gcc supports -fno-rtti -fno-exceptions
configure:9315: gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  -fno-rtti -fno-exceptions conftest.c >&5
cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C
configure:9319: $? = 0
configure:9330: result: no
configure:9345: checking for gcc option to produce PIC
configure:9522: result: -fPIC
configure:9530: checking if gcc PIC flag -fPIC works
configure:9548: gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  -fPIC -DPIC conftest.c >&5
configure:9552: $? = 0
configure:9563: result: yes
configure:9587: checking if gcc supports -c -o file.o
configure:9615: gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  -o out/conftest2.o conftest.c >&5
configure:9619: $? = 0
configure:9636: result: yes
configure:9662: checking whether the gcc linker (/usr/bin/ld) supports shared libraries
configure:10472: result: yes
configure:10498: checking whether -lc should be explicitly linked in
configure:10503: gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
configure:10506: $? = 0
configure:10520: gcc -shared -v conftest.o  -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| grep  -lc  \>/dev/null 2\>\&1
configure:10523: $? = 0
configure:10535: result: no
configure:10543: checking dynamic linker characteristics
configure:11061: result: GNU/Linux ld.so
configure:11065: checking how to hardcode library paths into programs
configure:11090: result: immediate
configure:11104: checking whether stripping libraries is possible
configure:11109: result: yes
configure:11234: checking for shl_load
configure:11291: gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c  >&5
/tmp/ccQW3dFm.o: In function `main':
conftest.c:(.text+0x17): undefined reference to `shl_load'
/tmp/ccQW3dFm.o:(.data+0x0): undefined reference to `shl_load'
collect2: ld returned 1 exit status
configure:11297: $? = 1
configure: failed program was:
| /* confdefs.h.  */
| 
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kile-1.9.3"
| #define VERSION "3.5.5"
| #ifdef __cplusplus
| extern "C" void std::exit (int) throw (); using std::exit;
| #endif
| #define KDELIBSUFF ""
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h.  */
| /* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
|    For example, HP-UX 11i <limits.h> declares gettimeofday.  */
| #define shl_load innocuous_shl_load
| 
| /* System header to define __stub macros and hopefully few prototypes,
|     which can conflict with char shl_load (); below.
|     Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
|     <limits.h> exists even on freestanding compilers.  */

no_spleen · Le 09/04/2007, à 12:04

Voila, cela fonctionne en installant tout les paquets mentionnés plus haut ainsi que xorg-dev.
Un grand merci!

altermundus · Le 09/04/2007, à 12:40

no_spleen a écrit :

Voila, cela fonctionne en installant tout les paquets mentionnés plus haut ainsi que xorg-dev.
Un grand merci!

yapadekoi

Une remarque toutefois, j'ai fait l'essai d'installer kubuntu-desktop.
1) autant le bureu 3D est rapide sous gnome que c'est une cata sous Kubuntu
2 ) Kile n'était pas dans une grande forme sous KDE, il doit manquer un petit truc....perso cela ne me dérange pas car je me sens mieux sous gnome

Le truc que je ne comprends pas c'est xorg-dev ? je vais finir par laisser tomber synaptic... !

Altermundus

Luckynow · Le 09/04/2007, à 13:23

@altermundus
Là je peux pas te dire pourquoi, faudrait faire un diff de vos deux fichiers configure...
La seul chose c'est que le message d'erreur qu'il (no_spleen) obtenait était très explicite, c'est ce que son configure demandait.....

@no_spleen
service

@ vous deux
si vous voulez pouvoir installer/ désinstaller facilement ce logiciel après coup, ne faites pas sudo make install, mais plutôt sudo checkinstall, il vous produit un fichier deb et lance dpkg avec ce qui vous permettra de le supprimer facilement après avec synaptic. (ce qui n'est pas possible avec make install, car le script de désinstallation est contenu dans le fichier make)

bibhafia · Le 13/05/2008, à 19:11

bosoir tout le monde je sui bleu en latex et je veux inserer une image(que j'ai obtenu a partir de gnuplot) dans mon rapport latex et j'ai essayer la commande epstopdf nom.eps mais j'ai le message suivant " expecting exponent"
quelqu'un peut il m'aider svp

playmobill · Le 15/05/2008, à 09:52

Oui, on veux bien t'aider, mais créé un nouveau post plutôt que de continuer celui-ci.

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 03/04/2007, à 14:49

Latex sur Ubuntu

#2 Le 03/04/2007, à 14:56

Re : Latex sur Ubuntu

#3 Le 03/04/2007, à 14:59

Re : Latex sur Ubuntu

#4 Le 03/04/2007, à 22:49

Re : Latex sur Ubuntu

#5 Le 03/04/2007, à 23:16

Re : Latex sur Ubuntu

#6 Le 07/04/2007, à 20:24

Re : Latex sur Ubuntu

#7 Le 07/04/2007, à 23:36

Re : Latex sur Ubuntu

#8 Le 08/04/2007, à 13:36

Re : Latex sur Ubuntu

#9 Le 08/04/2007, à 15:10

Re : Latex sur Ubuntu

#10 Le 08/04/2007, à 17:00

Re : Latex sur Ubuntu

#11 Le 08/04/2007, à 17:33

Re : Latex sur Ubuntu

#12 Le 08/04/2007, à 17:36

Re : Latex sur Ubuntu

#13 Le 08/04/2007, à 18:14

Re : Latex sur Ubuntu

#14 Le 08/04/2007, à 18:34

Re : Latex sur Ubuntu

#15 Le 08/04/2007, à 19:52

Re : Latex sur Ubuntu

#16 Le 09/04/2007, à 08:53

Re : Latex sur Ubuntu

#17 Le 09/04/2007, à 12:04

Re : Latex sur Ubuntu

#18 Le 09/04/2007, à 12:40

Re : Latex sur Ubuntu

#19 Le 09/04/2007, à 13:23

Re : Latex sur Ubuntu

#20 Le 13/05/2008, à 19:11

Re : Latex sur Ubuntu

#21 Le 15/05/2008, à 09:52

Re : Latex sur Ubuntu

Pied de page des forums