Ubuntu-fr

icinovice

pb installation webcam

bonjour!
j'ai essayé d'installer ma webcam qui est une APM Multimédia sur ubuntu avec easycam et easycam2 car avec les autres technique du tuto la http://doc.ubuntu-fr.org/materiel ma webcam ne fait partie d'aucune liste!
donc en linstallant tout fonctionne aucun pb,easycam me dit que le pilote est bien installé et quand je vais Applications>images>visionneur de webcam camorama j'obtiens une erreur "could not connect to video device (/dev/video0).please check connection" poutant elle est bien branchée.
merci

---

vive la liberté,simplicité et la logique!!

icinovice

Re : pb installation webcam

toujours personne pour me donner un coup de main

---

vive la liberté,simplicité et la logique!!

Toins31

Re : pb installation webcam

Moi camorama me répond toujours ça la première fois, puis je débranche et rebranche la caméra et là miracle ça marche...
Va comprendre Charles!
Bon courage

icinovice

Re : pb installation webcam

voila après avoir fais les commandes

linux@linux-desktop:~$ lsusb
Bus 005 Device 006: ID 0923:010f IC Media Corp. SIIG MobileCam
Bus 005 Device 003: ID 04cc:1520 Philips Semiconductors 
Bus 005 Device 005: ID 04f9:0169 Brother Industries, Ltd 
Bus 005 Device 001: ID 0000:0000  
Bus 002 Device 002: ID 07b5:0312 Mega World International, Ltd 
Bus 002 Device 001: ID 0000:0000  
Bus 003 Device 001: ID 0000:0000  
Bus 004 Device 001: ID 0000:0000  
Bus 001 Device 004: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter
Bus 001 Device 001: ID 0000:0000

---

vive la liberté,simplicité et la logique!!

icinovice

Re : pb installation webcam

voila lspci avec webcam branchée:

linux@linux-desktop:~$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.5 PIC: VIA Technologies, Inc. P4M890 I/O APIC Interrupt Controller
00:00.6 Host bridge: VIA Technologies, Inc. P4M890 Security Device
00:00.7 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:02.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller
00:03.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller
00:05.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
00:05.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
00:07.0 Network controller: RaLink RT2561/RT61 rev B 802.11g
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
02:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GT] (rev a1)

---

vive la liberté,simplicité et la logique!!

icinovice

Re : pb installation webcam

ben oui je me suis demandé mais bon je me suis dit peut être y a un rapport,c toi l'expert lol!lsusb je l'ai fais o dessus

---

vive la liberté,simplicité et la logique!!

icinovice

Re : pb installation webcam

[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[17179569.184000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 4, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24])
[17179569.184000] IOAPIC[1]: apic_id 5, version 3, address 0xfecc0000, GSI 24-47
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 2 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 20000000 (gap: 1fef0000:c0110000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda2 ro quiet splash locale=fr_FR
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] mapped IOAPIC to ffffb000 (fecc0000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 2793.758 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179572.280000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179572.280000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179572.288000] Memory: 508640k/523136k available (1911k kernel code, 13956k reserved, 1073k data, 308k init, 0k highmem)
[17179572.288000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179572.368000] Calibrating delay using timer specific routine.. 5594.57 BogoMIPS (lpj=11189153)
[17179572.368000] Security Framework v1.0.0 initialized
[17179572.368000] SELinux:  Disabled at boot.
[17179572.368000] Mount-cache hash table entries: 512
[17179572.368000] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000001
[17179572.368000] CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000001
[17179572.368000] monitor/mwait feature present.
[17179572.368000] using mwait in idle threads.
[17179572.368000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179572.368000] CPU: L2 cache: 1024K
[17179572.368000] CPU: Hyper-Threading is disabled
[17179572.368000] CPU: After all inits, caps: bfebfbff 20000000 00000000 00000180 0000641d 00000000 00000001
[17179572.368000] Checking 'hlt' instruction... OK.
[17179572.384000] SMP alternatives: switching to UP code
[17179572.384000] checking if image is initramfs... it is
[17179572.848000] Freeing initrd memory: 5640k freed
[17179572.848000] ACPI: Core revision 20060707
[17179572.852000] ACPI: Looking for DSDT ... not found!
[17179572.860000] CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 07
[17179572.860000] SMP alternatives: switching to SMP code
[17179572.860000] Booting processor 1/1 eip 3000
[17179572.872000] Initializing CPU#1
[17179572.952000] Calibrating delay using timer specific routine.. 5586.54 BogoMIPS (lpj=11173081)
[17179572.952000] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000001
[17179572.952000] CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000001
[17179572.952000] monitor/mwait feature present.
[17179572.952000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179572.952000] CPU: L2 cache: 1024K
[17179572.952000] CPU: Hyper-Threading is disabled
[17179572.952000] CPU: After all inits, caps: bfebfbff 20000000 00000000 00000180 0000641d 00000000 00000001
[17179572.952000] CPU1: Intel(R) Pentium(R) D CPU 2.80GHz stepping 07
[17179572.952000] Total of 2 processors activated (11181.11 BogoMIPS).
[17179572.952000] ENABLING IO-APIC IRQs
[17179572.952000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179573.096000] checking TSC synchronization across 2 CPUs: passed.
[17179573.100000] Brought up 2 CPUs
[17179573.264000] migration_cost=8000
[17179573.264000] NET: Registered protocol family 16
[17179573.264000] EISA bus registered
[17179573.264000] ACPI: bus type pci registered
[17179573.264000] PCI: Using MMCONFIG
[17179573.264000] Setting up standard PCI resources
[17179573.264000] mtrr: your CPUs had inconsistent fixed MTRR settings
[17179573.264000] mtrr: probably your BIOS does not setup all CPUs.
[17179573.264000] mtrr: corrected configuration.
[17179573.276000] ACPI: Interpreter enabled
[17179573.276000] ACPI: Using IOAPIC for interrupt routing
[17179573.276000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.276000] PCI: Probing PCI hardware (bus 00)
[17179573.284000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
[17179573.284000] PCI: Quirk-MSI-K8T Soundcard On
[17179573.284000] PCI: Unexpected Value in PCI-Register: no Change!
[17179573.284000] Boot video device is 0000:02:00.0
[17179573.284000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.384000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
[17179573.384000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[17179573.384000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[17179573.384000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[17179573.384000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
[17179573.384000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179573.384000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179573.388000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0
[17179573.388000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179573.388000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12)
[17179573.388000] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[17179573.388000] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[17179573.388000] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[17179573.388000] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
[17179573.392000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.392000] pnp: PnP ACPI init
[17179573.400000] pnp: PnP ACPI: found 15 devices
[17179573.400000] PnPBIOS: Disabled by ACPI PNP
[17179573.400000] PCI: Using ACPI for IRQ routing
[17179573.400000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179573.400000] pnp: 00:01: ioport range 0x400-0x47f could not be reserved
[17179573.400000] pnp: 00:01: ioport range 0x500-0x50f has been reserved
[17179573.400000] PCI: Bridge: 0000:00:01.0
[17179573.400000]   IO window: 9000-9fff
[17179573.400000]   MEM window: dfb00000-dfbfffff
[17179573.400000]   PREFETCH window: dfe00000-dfefffff
[17179573.400000] PCI: Bridge: 0000:00:02.0
[17179573.400000]   IO window: b000-bfff
[17179573.400000]   MEM window: dc000000-deffffff
[17179573.400000]   PREFETCH window: c0000000-cfffffff
[17179573.400000] PCI: Bridge: 0000:00:03.0
[17179573.400000]   IO window: a000-afff
[17179573.400000]   MEM window: dfd00000-dfdfffff
[17179573.400000]   PREFETCH window: dfc00000-dfcfffff
[17179573.400000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179573.400000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
[17179573.400000] PCI: Via IRQ fixup for 0000:00:02.0, from 11 to 9
[17179573.400000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179573.400000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
[17179573.400000] PCI: Via IRQ fixup for 0000:00:03.0, from 11 to 1
[17179573.400000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[17179573.400000] NET: Registered protocol family 2
[17179573.444000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179573.444000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[17179573.444000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[17179573.444000] TCP: Hash tables configured (established 16384 bind 8192)
[17179573.444000] TCP reno registered
[17179573.444000] audit: initializing netlink socket (disabled)
[17179573.444000] audit(1176843484.444:1): initialized
[17179573.444000] VFS: Disk quotas dquot_6.5.1
[17179573.444000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.444000] Initializing Cryptographic API
[17179573.444000] io scheduler noop registered
[17179573.444000] io scheduler anticipatory registered
[17179573.444000] io scheduler deadline registered
[17179573.444000] io scheduler cfq registered (default)
[17179581.444000] 0000:00:10.4 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[17179581.444000] PCI: Bypassing VIA 8237 APIC De-Assert Message
[17179581.444000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
[17179581.444000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179581.444000] assign_interrupt_mode Found MSI capability
[17179581.444000] Allocate Port Service[0000:00:02.0:pcie00]
[17179581.444000] Allocate Port Service[0000:00:02.0:pcie01]
[17179581.444000] Allocate Port Service[0000:00:02.0:pcie02]
[17179581.444000] Allocate Port Service[0000:00:02.0:pcie03]
[17179581.444000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
[17179581.444000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[17179581.444000] assign_interrupt_mode Found MSI capability
[17179581.444000] Allocate Port Service[0000:00:03.0:pcie00]
[17179581.444000] Allocate Port Service[0000:00:03.0:pcie01]
[17179581.444000] Allocate Port Service[0000:00:03.0:pcie02]
[17179581.444000] Allocate Port Service[0000:00:03.0:pcie03]
[17179581.444000] isapnp: Scanning for PnP cards...
[17179581.796000] isapnp: No Plug & Play device found
[17179581.820000] Real Time Clock Driver v1.12ac
[17179581.820000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179581.820000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179581.820000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179581.824000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179581.824000] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179581.824000] mice: PS/2 mouse device common for all mice
[17179581.824000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179581.824000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179581.824000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179581.824000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179581.824000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179581.824000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179581.824000] EISA: Probing bus 0 at eisa.0
[17179581.824000] EISA: Detected 0 cards.
[17179581.824000] TCP bic registered
[17179581.824000] NET: Registered protocol family 1
[17179581.824000] NET: Registered protocol family 8
[17179581.824000] NET: Registered protocol family 20
[17179581.824000] Starting balanced_irq
[17179581.824000] Using IPI No-Shortcut mode
[17179581.824000] ACPI: (supports S0 S1 S4 S5)
[17179581.824000] Freeing unused kernel memory: 308k freed
[17179581.848000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179582.892000] Capability LSM initialized
[17179582.928000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
[17179582.928000] ACPI: Getting cpuindex for acpiid 0x2
[17179582.928000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
[17179582.928000] ACPI: Getting cpuindex for acpiid 0x3
[17179583.276000] SCSI subsystem initialized
[17179583.276000] libata version 1.20 loaded.
[17179583.280000] sata_via 0000:00:0f.0: version 1.1
[17179583.280000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[17179583.280000] ACPI: PCI Interrupt 0000:00:0f.0[b] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 209
[17179583.280000] PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 1
[17179583.280000] sata_via 0000:00:0f.0: routed to hard irq line 1
[17179583.280000] ata1: SATA max UDMA/133 cmd 0xF800 ctl 0xF402 bmdma 0xE800 irq 209
[17179583.280000] ata2: SATA max UDMA/133 cmd 0xF000 ctl 0xEC02 bmdma 0xE808 irq 209
[17179583.444000] scsi0 : sata_via
[17179583.608000] scsi1 : sata_via
[17179583.628000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[17179583.628000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 209
[17179583.628000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 1
[17179583.628000] VP_IDE: chipset revision 6
[17179583.628000] VP_IDE: not 100% native mode: will probe irqs later
[17179583.628000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[17179583.628000]     ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
[17179583.628000]     ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
[17179583.628000] Probing IDE interface ide0...
[17179584.044000] hda: WDC WD400EB-00CPF0, ATA DISK drive
[17179584.324000] hdb: Maxtor 6L080P0, ATA DISK drive
[17179584.384000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179584.420000] Probing IDE interface ide1...
[17179585.284000] hdc: DVD-RW IDE1004, ATAPI CD/DVD-ROM drive
[17179586.068000] hdd: DVDRW IDE H16X, ATAPI CD/DVD-ROM drive
[17179586.124000] ide1 at 0x170-0x177,0x376 on irq 15
[17179586.136000] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[17179586.136000] Uniform CD-ROM driver Revision: 3.20
[17179586.136000] hda: max request size: 128KiB
[17179586.136000] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
[17179586.136000] hda: cache flushes not supported
[17179586.136000]  hda:<6>hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179586.160000]  hda1 hda2 hda3
[17179586.196000] hdb: max request size: 128KiB
[17179586.196000] hdb: 160086528 sectors (81964 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33)
[17179586.200000] hdb: cache flushes supported
[17179586.200000]  hdb: hdb1
[17179586.796000] usbcore: registered new driver usbfs
[17179586.800000] usbcore: registered new driver hub
[17179586.800000] USB Universal Host Controller Interface driver v3.0
[17179586.800000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[17179586.800000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 217
[17179586.800000] PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 9
[17179586.800000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179586.800000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179586.800000] uhci_hcd 0000:00:10.0: irq 217, io base 0x0000dc00
[17179586.800000] usb usb1: configuration #1 chosen from 1 choice
[17179586.800000] hub 1-0:1.0: USB hub found
[17179586.800000] hub 1-0:1.0: 2 ports detected
[17179586.904000] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 217
[17179586.904000] PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 9
[17179586.904000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179586.904000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179586.904000] uhci_hcd 0000:00:10.1: irq 217, io base 0x0000d800
[17179586.904000] usb usb2: configuration #1 chosen from 1 choice
[17179586.904000] hub 2-0:1.0: USB hub found
[17179586.904000] hub 2-0:1.0: 2 ports detected
[17179587.008000] ACPI: PCI Interrupt 0000:00:10.2[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 217
[17179587.008000] PCI: Via IRQ fixup for 0000:00:10.2, from 11 to 9
[17179587.008000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179587.008000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179587.008000] uhci_hcd 0000:00:10.2: irq 217, io base 0x0000d400
[17179587.008000] usb usb3: configuration #1 chosen from 1 choice
[17179587.008000] hub 3-0:1.0: USB hub found
[17179587.008000] hub 3-0:1.0: 2 ports detected
[17179587.112000] ACPI: PCI Interrupt 0000:00:10.3[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 217
[17179587.112000] PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 9
[17179587.112000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179587.112000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179587.112000] uhci_hcd 0000:00:10.3: irq 217, io base 0x0000d000
[17179587.112000] usb usb4: configuration #1 chosen from 1 choice
[17179587.112000] hub 4-0:1.0: USB hub found
[17179587.112000] hub 4-0:1.0: 2 ports detected
[17179587.216000] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 217
[17179587.216000] PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 9
[17179587.216000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179587.216000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[17179587.216000] ehci_hcd 0000:00:10.4: irq 217, io mem 0xdfffc000
[17179587.216000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179587.216000] usb usb5: configuration #1 chosen from 1 choice
[17179587.216000] hub 5-0:1.0: USB hub found
[17179587.216000] hub 5-0:1.0: 8 ports detected
[17179587.272000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[17179587.380000] Attempting manual resume
[17179587.412000] kjournald starting.  Commit interval 5 seconds
[17179587.412000] EXT3-fs: mounted filesystem with ordered data mode.
[17179588.528000] usb 5-3: new high speed USB device using ehci_hcd and address 3
[17179588.660000] usb 5-3: configuration #1 chosen from 1 choice
[17179588.660000] hub 5-3:1.0: USB hub found
[17179588.660000] hub 5-3:1.0: 4 ports detected
[17179589.188000] usb 1-2: new full speed USB device using uhci_hcd and address 3
[17179599.352000] usb 1-2: configuration #1 chosen from 1 choice
[17179599.556000] usb 5-3.1: new full speed USB device using ehci_hcd and address 5
[17179599.648000] usb 5-3.1: configuration #1 chosen from 1 choice
[17179599.852000] usb 5-3.2: new full speed USB device using ehci_hcd and address 6
[17179599.944000] usb 5-3.2: configuration #1 chosen from 1 choice
[17179600.184000] usb 2-2: new low speed USB device using uhci_hcd and address 2
[17179600.360000] usb 2-2: configuration #1 chosen from 1 choice
[17179600.368000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179600.448000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179600.892000] 8139too Fast Ethernet driver 0.9.27
[17179600.892000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 21 (level, low) -> IRQ 217
[17179600.892000] eth0: RealTek RTL8139 at 0xe08a8000, 00:16:17:b2:6b:c2, IRQ 217
[17179600.892000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[17179600.900000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179600.948000] Linux video capture interface: v1.00
[17179601.032000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17179601.052000] Loading module: rt61pci - CVS (N/A) by http://rt2x00.serialmonkey.com.
[17179601.052000] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 225
[17179601.080000] Floppy drive(s): fd0 is 1.44M
[17179601.108000] FDC 0 is a post-1991 82077
[17179601.108000] wmaster0: Selected rate control algorithm 'simple'
[17179601.340000] parport: PnPBIOS parport detected.
[17179601.340000] parport0: PC-style at 0x378, irq 7 [PCSPP]
[17179601.352000] input: PC Speaker as /class/input/input1
[17179601.536000] NET: Registered protocol family 10
[17179601.536000] lo: Disabled Privacy Extensions
[17179601.536000] IPv6 over IPv4 tunneling driver
[17179601.572000] Linux agpgart interface v0.101 (c) Dave Jones
[17179601.684000] Bluetooth: Core ver 2.8
[17179601.684000] NET: Registered protocol family 31
[17179601.684000] Bluetooth: HCI device and connection manager initialized
[17179601.684000] Bluetooth: HCI socket layer initialized
[17179601.704000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0169
[17179601.704000] usbcore: registered new driver usblp
[17179601.704000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[17179601.776000] bttv: driver version 0.9.16 loaded
[17179601.776000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[17179601.776000] bttv: Bt8xx card found (0).
[17179601.776000] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 233
[17179601.776000] bttv0: Bt878 (rev 17) at 0000:00:05.0, irq: 233, latency: 64, mmio: 0xdffff000
[17179601.776000] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[17179601.776000] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
[17179601.776000] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
[17179601.780000] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
[17179601.868000] tveeprom 1-0050: Hauppauge model 44806, rev D109, serial# 6659215
[17179601.868000] tveeprom 1-0050: tuner model is Philips FI1216MF MK2 (idx 9, type 3)
[17179601.868000] tveeprom 1-0050: TV standards PAL(B/G) SECAM(L/L') (eeprom 0x24)
[17179601.868000] tveeprom 1-0050: audio processor is None (idx 0)
[17179601.868000] tveeprom 1-0050: has no radio
[17179601.868000] bttv0: Hauppauge eeprom indicates model#44806
[17179601.868000] bttv0: using tuner=3
[17179601.868000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[17179601.872000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[17179601.872000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[17179601.948000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[17179602.200000] nvidia: module license 'NVIDIA' taints kernel.
[17179602.460000] usbcore: registered new driver libusual
[17179602.492000] Initializing USB Mass Storage driver...
[17179602.492000] scsi2 : SCSI emulation for USB Mass Storage devices
[17179602.492000] usbcore: registered new driver usb-storage
[17179602.492000] USB Mass Storage support registered.
[17179602.492000] usb-storage: device found at 5
[17179602.492000] usb-storage: waiting for device to settle before scanning
[17179602.528000] usbcore: registered new driver hiddev
[17179602.540000] Bluetooth: HCI USB driver ver 2.9
[17179602.556000] input: Mega World USB Game Controllers as /class/input/input3
[17179602.556000] input: USB HID v1.10 Joystick [Mega World USB Game Controllers] on usb-0000:00:10.1-2
[17179602.556000] usbcore: registered new driver usbhid
[17179602.556000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179602.556000] usbcore: registered new driver hci_usb
[17179602.576000] drivers/media/video/spca5xx/spca5xx-main.c: USB SPCA5xx camera found. Type ICM532 cam (unknown CCD)
[17179602.576000] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[17179602.604000] usbcore: registered new driver spca5xx
[17179602.604000] drivers/media/video/spca5xx/spca5xx-main.c: spca5xx driver 00.57.08 registered
[17179602.616000] ts: Compaq touchscreen protocol output
[17179602.680000] tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
[17179602.680000] tuner 1-0061: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF))
[17179602.712000] bttv0: registered device video1
[17179602.712000] bttv0: registered device vbi0
[17179602.712000] bttv0: PLL: 28636363 => 35468950 .. ok
[17179602.744000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 50
[17179602.744000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[17179602.744000] NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9755  Mon Feb 26 23:21:15 PST 2007
[17179602.768000] ACPI: PCI Interrupt 0000:00:05.1[A] -> GSI 16 (level, low) -> IRQ 233
[17179602.832000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[17179602.832000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 58
[17179602.832000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 10
[17179602.832000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179602.844000] bt878: AUDIO driver version 0.0.0 loaded
[17179602.928000] NET: Registered protocol family 17
[17179603.568000] lp0: using parport0 (interrupt-driven).
[17179603.592000] Adding 570296k swap on /dev/disk/by-uuid/1c3ca1ae-245b-43f9-89b1-3f9c725b2809.  Priority:-1 extents:1 across:570296k
[17179603.760000] EXT3 FS on hda2, internal journal
[17179603.984000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179604.068000] NTFS volume version 3.1.
[17179604.112000] NTFS volume version 3.1.
[17179607.492000] usb-storage: device scan complete
[17179607.500000]   Vendor: Brother   Model: DCP-110C          Rev: 1.00
[17179607.500000]   Type:   Direct-Access                      ANSI SCSI revision: 02
[17179607.600000] sd 2:0:0:0: Attached scsi removable disk sda
[17179607.620000] sd 2:0:0:0: Attached scsi generic sg0 type 0
[17179608.596000] ACPI: Power Button (FF) [PWRF]
[17179608.596000] ACPI: Power Button (CM) [PWRB]
[17179608.596000] ACPI: Sleep Button (CM) [SLPB]
[17179608.712000] ibm_acpi: ec object not found
[17179608.748000] pcc_acpi: loading...
[17179611.848000] eth0: no IPv6 routers present
[17179612.204000] wlan0: no IPv6 routers present
[17179613.640000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179613.640000] apm: disabled - APM is not SMP safe.
[17179618.268000] Bluetooth: L2CAP ver 2.8
[17179618.268000] Bluetooth: L2CAP socket layer initialized
[17179618.272000] Bluetooth: RFCOMM socket layer initialized
[17179618.272000] Bluetooth: RFCOMM TTY layer initialized
[17179618.272000] Bluetooth: RFCOMM ver 1.7
[17180533.072000] rt61pci->rt61pci_init_bbp: Error - BBP register access failed, aborting.
[17180533.072000] rt61pci->rt61pci_enable_radio: Error - Register initialization failed.
[17180543.508000] wlan0: no IPv6 routers present
[17180640.448000] rt61pci->rt61pci_init_bbp: Error - BBP register access failed, aborting.
[17180640.448000] rt61pci->rt61pci_enable_radio: Error - Register initialization failed.
[17180651.352000] wlan0: no IPv6 routers present
[17180787.144000] rt61pci->rt61pci_init_bbp: Error - BBP register access failed, aborting.
[17180787.144000] rt61pci->rt61pci_enable_radio: Error - Register initialization failed.
[17180798.108000] wlan0: no IPv6 routers present
[17180957.208000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17180967.580000] eth0: no IPv6 routers present
[17182993.152000] usb 5-3.2: USB disconnect, address 6
[17182993.156000] drivers/media/video/spca5xx/spca5xx-main.c: usb_submit_urb() ret -19
[17182993.172000] drivers/media/video/spca5xx/spca5xx-main.c: usb_submit_urb() ret -19

et j'ai installé camorama mais j'ai toujours le même message d'erreur.ma cam et branché à un boitier avec plusieurs prises usb ,avant l'installation de camorama j'avais un voyant qui s'allumait pour dire que c'était bien connecté et je l'ai débranché/rebranché et le voyant ne s'allume plus

---

vive la liberté,simplicité et la logique!!

icinovice

Re : pb installation webcam

ok merci safe93 mais sur le lien c'est pas la même webcam.j'a trouvé des liens avec Mobilewebcam sur google mais tous en anglais donc assez galère!

---

vive la liberté,simplicité et la logique!!