#1 Le 23/04/2007, à 20:58
- Rahan
[migration] Problème Feisty fawn et pilote proprio Xpress 200M
Bonjour à tous,
Je me suis mis à l'heure du nouvel Ubuntu: Feisty...mais que de problème, en voici un premier qui est des plus embetant: j'ai ouvert le gestionnaire des pilote proprio, il me proposait, pour un fonctionnement optimal d'installé xorg... bref pour ma carte graphique.
Suite à l'installation il me demande de redémarrer mon ordi. Là probléme aprés l'écran de connection, j'obtient le fond d'écran d'origine de Feisty avec dans le coin haut-gauche un rectangle blanc ou la fléche de ma souris se meut en curseur texte et rien d'autre.
Comment je peut enlever (à défaut d'arranger) ce pilote afin de pouvoir profiter de Feisty et corriger le problème de wifi!!
Merci par avance pour vos réponse.
Dernière modification par Rahan (Le 24/04/2007, à 12:26)
C'est parce qu'on imagine simultanément tous les pas qu'on devrait faire qu'on se décourage, alors qu'il s'agit de les aligner un à un.
Hors ligne
#2 Le 23/04/2007, à 22:13
- awala
Re : [migration] Problème Feisty fawn et pilote proprio Xpress 200M
bonsoir
j'ai la meme carte graphique que toi sur un portable fujitsu siemens amilo a1650g
je te donne mon xorg qui fonctionne avec beryl 0.2 seulement et j'ai aussi installé fglrx par feisty comme toi et j'ai une session xgl (voir la doc) sous ubuntu
mon xorg :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
Fontpath "/usr/share/X11/fonts/misc"
Fontpath "/usr/share/X11/fonts/cyrillic"
Fontpath "/usr/share/X11/fonts/100dpi/:unscaled"
Fontpath "/usr/share/X11/fonts/75dpi/:unscaled"
Fontpath "/usr/share/X11/fonts/Type1"
Fontpath "/usr/share/X11/fonts/100dpi"
Fontpath "/usr/share/X11/fonts/75dpi"
Fontpath "/usr/share/fonts/X11/misc"
# path to defoma fonts
Fontpath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
# Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom"# Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
# /dev/input/event
# for USB
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom"# Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
# /dev/input/event
# for USB
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom"# Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
# /dev/input/event
# for USB
EndSection
Section "Device"
Identifier "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
Driver "fglrx"
Busid "PCI:1:5:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
Monitor "Generic Monitor"
Defaultdepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "stylus" "SendCoreEvents"
Inputdevice "cursor" "SendCoreEvents"
Inputdevice "eraser" "SendCoreEvents"
Inputdevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "0"
EndSection
si j'ai pu t'aider
bonne soirée
awala
Laptop Toshiba P200-1D0 sous karmic
Laptop Asus eeepc sous jaunty
Hors ligne
#3 Le 23/04/2007, à 22:17
- Rahan
Re : [migration] Problème Feisty fawn et pilote proprio Xpress 200M
Merci à toi si tout fonctionne, je pense suivre ton exemple!
Le problème pour l'instatn c'est que j'ai un écran ocre sans aucune commande possible.. a moins que je reconfigure mon xorg via le live cd?
merci encore en tout cas.
C'est parce qu'on imagine simultanément tous les pas qu'on devrait faire qu'on se décourage, alors qu'il s'agit de les aligner un à un.
Hors ligne
#4 Le 24/04/2007, à 12:29
- Rahan
Re : [migration] Problème Feisty fawn et pilote proprio Xpress 200M
Je ne regarde sans doute pas assez le forum, je n'avais pas vu qu'il y avait un sujet centralisant les problème avec les pilote ATI sous Feisty!
Je fais donc migrer mon sujet vers ce topic!
Mais je continu ici étant donné les multiple problème traité dans le topic précité!
Donc j'ai essayé ton xorg, mais j'ai toujours la même chose, je pense que le problème vient du fait que je n'ai pas désactivé avant l'instalation des pilotes proprio, Aiglx..je pensais que cela se faisait automatiquement....maintenant comment faire pour retrouver un écran qui me permette de faire quelque chose, sachant que même la session de secours Gnome ne donne pas plus de résultats!!
A attendant vos réponses.....bonne journée
Dernière modification par Rahan (Le 25/04/2007, à 11:24)
C'est parce qu'on imagine simultanément tous les pas qu'on devrait faire qu'on se décourage, alors qu'il s'agit de les aligner un à un.
Hors ligne
#5 Le 25/04/2007, à 11:26
- Rahan
Re : [migration] Problème Feisty fawn et pilote proprio Xpress 200M
un petit up, histoire de pouvoir un jour réutiliser Ubuntu!
C'est parce qu'on imagine simultanément tous les pas qu'on devrait faire qu'on se décourage, alors qu'il s'agit de les aligner un à un.
Hors ligne