Pinnacle PCTV 40i

Gustry · Le 24/04/2007, à 09:41

Bonjour
Cela fait un an que j'ai acheté une carte PCTuner 40i. Je n'ai toujours pas pu m'en servir sous Linux alors que j'aimerai bien.
Sur la boite déjà, c'est bien marque 40i comme modèle, mais d'après lspci -v :

01:00.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d0)
Subsystem: Pinnacle Systems Inc. PCTV 110i (saa7133)
Flags: bus master, medium devsel, latency 64, IRQ 98
Memory at cacdf000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>

Il s'agirait du modèle 110i, non ?

Bref, j'ai fais deux fois l'installation depuis le wiki, c'est à dire cette page la : http://doc.kubuntu-fr.org/materiel/pctv110i
Cela na jamais marché. Il y avait des erreurs à la compilation. J'ai regardé sur le forum. Je n'ai pas été le seul à avoir ce problème lors de la compilation. D'après des posts sur le forum, il ne faudrait pas utiliser gcc-3.4 pour la compilation. Il faudrait donc corriger dans le wiki. Le problème, c'est que moi, je ne m'y connais pas du tout, donc je laisse faire les autres. Donc j'ai utilisé la méthode proposé par cabrito. La compilation ne ma donné aucune erreur:

hg clone http://linuxtv.org/hg/v4l-dvb
cd v4l-dvb
make
sudo make install

Ensuite, j'ai utilisé le wiki, j'ai fais :

On crée un fichier pour paramétrer le lancement du module saa7134:
$sudo vim /etc/modprobe.d/saa7134
dans lequel on place ces deux lignes
options saa7134 audio_ddep=10 # pour avoir le son du tuner
options tuner secam=l # pour configurer le tuner pour les chaines francaises
On attribue les bons droits à notre fichier
$sudo chmod 644 /etc/modprobe.d/saa7134
Enfin on reboot pour que nos modifications prennent effets (pas sûr)
$sudo reboot

J'ai installé kdetv, mais au scannage des fréquances, il n'y a rien du tout.
Je suis retournée sous windows pour prendre les valeurs des fréquances des chaines. Pour TF1, c'est 815750KHz en secam L. J'ai essayé de rajouter cette valeur dans kdetv, mais je ne peux pas ajouter une valeur de plus de 9 999,00 MHz.

Mais, finalement, je ne suis pas sur que ma carte tv soit bien reconnu. De plus, dans kdetv, j'ai television, composite 1, composite 2 et s-video. Je pense qu'il faut choisir television, mais les autres sorties, elles correspondent à quoi ?

Voila, j'aimerai bien en finir avec cette carte tunerTV.
Merci

Gustry

PS : Si le wiki pourrait être à jour, cela serait bien je pense pour les nouveaux comme moi. Apparement, je ne suis pas le seul avec le problème de gcc-3.4.

Gustry · Le 26/04/2007, à 11:15

Je me permet un petit up.

Desintegr · Le 26/04/2007, à 12:11

Que donne un dmesg ?

Et un lsmod ?

Gustry · Le 26/04/2007, à 12:23

trimaille@kubuntu:~$ dmesg
[17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Mar 13 23:32:38 UTC 2007 (Ubuntu 2.6.17-11.37-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003ff80000 (usable)
[17179569.184000] BIOS-e820: 000000003ff80000 - 000000003ff8e000 (ACPI data)
[17179569.184000] BIOS-e820: 000000003ff8e000 - 000000003ffe0000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000ff780
[17179569.184000] On node 0 totalpages: 262016
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 32640 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM ) @ 0x000fa990
[17179569.184000] ACPI: RSDT (v001 A M I OEMRSDT 0x06000514 MSFT 0x00000097) @ 0x3ff80000
[17179569.184000] ACPI: FADT (v001 A M I OEMFACP 0x06000514 MSFT 0x00000097) @ 0x3ff80200
[17179569.184000] ACPI: MADT (v001 A M I OEMAPIC 0x06000514 MSFT 0x00000097) @ 0x3ff80390
[17179569.184000] ACPI: OEMB (v001 A M I AMI_OEM 0x06000514 MSFT 0x00000097) @ 0x3ff8e040
[17179569.184000] >>> ERROR: Invalid checksum
[17179569.184000] ACPI: MCFG (v001 A M I OEMMCFG 0x06000514 MSFT 0x00000097) @ 0x3ff88540
[17179569.184000] ACPI: DSDT (v001 A0228 A0228000 0x00000000 INTL 0x02002026) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:4 APIC version 20
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bfb00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hdb6 ro quiet splash locale=fr_FR
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 3011.098 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179571.068000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179571.068000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.088000] Memory: 1029308k/1048064k available (1911k kernel code, 18112k reserved, 1073k data, 308k init, 130560k highmem)
[17179571.088000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179571.168000] Calibrating delay using timer specific routine.. 6029.26 BogoMIPS (lpj=12058530)
[17179571.168000] Security Framework v1.0.0 initialized
[17179571.168000] SELinux: Disabled at boot.
[17179571.168000] Mount-cache hash table entries: 512
[17179571.168000] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000
[17179571.168000] CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000
[17179571.168000] monitor/mwait feature present.
[17179571.168000] using mwait in idle threads.
[17179571.168000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179571.168000] CPU: L2 cache: 1024K
[17179571.168000] CPU: Hyper-Threading is disabled
[17179571.168000] CPU: After all inits, caps: bfebfbff 20000000 00000000 00000180 0000649d 00000000 00000000
[17179571.168000] Checking 'hlt' instruction... OK.
[17179571.184000] SMP alternatives: switching to UP code
[17179571.184000] checking if image is initramfs... it is
[17179571.600000] Freeing initrd memory: 5297k freed
[17179571.600000] ACPI: Core revision 20060707
[17179571.600000] ACPI: Looking for DSDT ... not found!
[17179571.604000] CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 04
[17179571.604000] SMP alternatives: switching to SMP code
[17179571.604000] Booting processor 1/1 eip 3000
[17179571.612000] Initializing CPU#1
[17179571.696000] Calibrating delay using timer specific routine.. 6022.00 BogoMIPS (lpj=12044017)
[17179571.696000] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000
[17179571.696000] CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000
[17179571.696000] monitor/mwait feature present.
[17179571.696000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179571.696000] CPU: L2 cache: 1024K
[17179571.696000] CPU: Hyper-Threading is disabled
[17179571.696000] CPU: After all inits, caps: bfebfbff 20000000 00000000 00000180 0000649d 00000000 00000000
[17179571.696000] CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 04
[17179571.696000] Total of 2 processors activated (12051.27 BogoMIPS).
[17179571.696000] ENABLING IO-APIC IRQs
[17179571.696000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179571.840000] checking TSC synchronization across 2 CPUs: passed.
[17179571.844000] Brought up 2 CPUs
[17179571.932000] migration_cost=4000
[17179571.932000] NET: Registered protocol family 16
[17179571.932000] EISA bus registered
[17179571.932000] ACPI: bus type pci registered
[17179571.932000] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[17179571.932000] PCI: Not using MMCONFIG.
[17179571.932000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=8
[17179571.932000] PCI: Using configuration type 1
[17179571.932000] Setting up standard PCI resources
[17179571.956000] ACPI: Interpreter enabled
[17179571.956000] ACPI: Using IOAPIC for interrupt routing
[17179571.956000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.956000] PCI: Probing PCI hardware (bus 00)
[17179571.960000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179571.960000] Boot video device is 0000:08:00.0
[17179571.960000] PCI: Transparent bridge - 0000:00:1e.0
[17179571.960000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.964000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[17179571.964000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[17179571.964000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[17179571.968000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[17179571.968000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[17179571.968000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[17179571.972000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179571.972000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[17179571.972000] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[17179571.976000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179571.976000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179571.976000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179571.976000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.976000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179571.976000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.976000] pnp: PnP ACPI init
[17179571.980000] pnp: PnP ACPI: found 17 devices
[17179571.980000] PnPBIOS: Disabled by ACPI PNP
[17179571.980000] PCI: Using ACPI for IRQ routing
[17179571.980000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179572.008000] pnp: 00:08: ioport range 0x290-0x297 has been reserved
[17179572.008000] PCI: Bridge: 0000:00:01.0
[17179572.008000] IO window: e000-efff
[17179572.008000] MEM window: caf00000-cfffffff
[17179572.008000] PREFETCH window: d0000000-dfffffff
[17179572.008000] PCI: Bridge: 0000:00:1c.0
[17179572.008000] IO window: d000-dfff
[17179572.008000] MEM window: disabled.
[17179572.008000] PREFETCH window: disabled.
[17179572.008000] PCI: Bridge: 0000:00:1c.1
[17179572.008000] IO window: c000-cfff
[17179572.008000] MEM window: disabled.
[17179572.008000] PREFETCH window: disabled.
[17179572.008000] PCI: Bridge: 0000:00:1c.2
[17179572.008000] IO window: b000-bfff
[17179572.008000] MEM window: disabled.
[17179572.008000] PREFETCH window: disabled.
[17179572.008000] PCI: Bridge: 0000:00:1c.3
[17179572.008000] IO window: a000-afff
[17179572.008000] MEM window: disabled.
[17179572.008000] PREFETCH window: disabled.
[17179572.008000] PCI: Bridge: 0000:00:1c.4
[17179572.008000] IO window: 9000-9fff
[17179572.008000] MEM window: cae00000-caefffff
[17179572.008000] PREFETCH window: disabled.
[17179572.008000] PCI: Bridge: 0000:00:1c.5
[17179572.008000] IO window: 8000-8fff
[17179572.008000] MEM window: cad00000-cadfffff
[17179572.008000] PREFETCH window: disabled.
[17179572.008000] PCI: Bridge: 0000:00:1e.0
[17179572.008000] IO window: 6000-7fff
[17179572.008000] MEM window: cac00000-cacfffff
[17179572.008000] PREFETCH window: 50000000-500fffff
[17179572.008000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179572.008000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179572.008000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179572.008000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179572.008000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 177
[17179572.008000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179572.008000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179572.008000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[17179572.008000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193
[17179572.008000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[17179572.008000] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
[17179572.008000] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[17179572.008000] ACPI: PCI Interrupt 0000:00:1c.5[b] -> GSI 17 (level, low) -> IRQ 177
[17179572.008000] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[17179572.008000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179572.008000] NET: Registered protocol family 2
[17179572.056000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179572.056000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179572.056000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179572.056000] TCP: Hash tables configured (established 131072 bind 65536)
[17179572.056000] TCP reno registered
[17179572.056000] audit: initializing netlink socket (disabled)
[17179572.056000] audit(1177579890.056:1): initialized
[17179572.056000] highmem bounce pool size: 64 pages
[17179572.056000] VFS: Disk quotas dquot_6.5.1
[17179572.056000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179572.056000] Initializing Cryptographic API
[17179572.056000] io scheduler noop registered
[17179572.056000] io scheduler anticipatory registered
[17179572.056000] io scheduler deadline registered
[17179572.056000] io scheduler cfq registered (default)
[17179572.056000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179572.056000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179572.056000] assign_interrupt_mode Found MSI capability
[17179572.056000] Allocate Port Service[0000:00:01.0:pcie00]
[17179572.056000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179572.056000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179572.056000] assign_interrupt_mode Found MSI capability
[17179572.056000] Allocate Port Service[0000:00:1c.0:pcie00]
[17179572.056000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 177
[17179572.056000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179572.056000] assign_interrupt_mode Found MSI capability
[17179572.056000] Allocate Port Service[0000:00:1c.1:pcie00]
[17179572.056000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179572.056000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[17179572.056000] assign_interrupt_mode Found MSI capability
[17179572.056000] Allocate Port Service[0000:00:1c.2:pcie00]
[17179572.056000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193
[17179572.056000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[17179572.056000] assign_interrupt_mode Found MSI capability
[17179572.060000] Allocate Port Service[0000:00:1c.3:pcie00]
[17179572.060000] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
[17179572.060000] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[17179572.060000] assign_interrupt_mode Found MSI capability
[17179572.060000] Allocate Port Service[0000:00:1c.4:pcie00]
[17179572.060000] ACPI: PCI Interrupt 0000:00:1c.5[b] -> GSI 17 (level, low) -> IRQ 177
[17179572.060000] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[17179572.060000] assign_interrupt_mode Found MSI capability
[17179572.060000] Allocate Port Service[0000:00:1c.5:pcie00]
[17179572.060000] isapnp: Scanning for PnP cards...
[17179572.412000] isapnp: No Plug & Play device found
[17179572.440000] Real Time Clock Driver v1.12ac
[17179572.440000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179572.440000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179572.440000] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179572.440000] mice: PS/2 mouse device common for all mice
[17179572.440000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179572.440000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179572.440000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179572.440000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[17179572.444000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179572.444000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179572.444000] EISA: Probing bus 0 at eisa.0
[17179572.444000] Cannot allocate resource for EISA slot 3
[17179572.444000] Cannot allocate resource for EISA slot 4
[17179572.444000] Cannot allocate resource for EISA slot 5
[17179572.444000] Cannot allocate resource for EISA slot 6
[17179572.444000] Cannot allocate resource for EISA slot 7
[17179572.444000] Cannot allocate resource for EISA slot 8
[17179572.444000] EISA: Detected 0 cards.
[17179572.444000] TCP bic registered
[17179572.444000] NET: Registered protocol family 1
[17179572.444000] NET: Registered protocol family 8
[17179572.444000] NET: Registered protocol family 20
[17179572.444000] Starting balanced_irq
[17179572.444000] Using IPI No-Shortcut mode
[17179572.444000] ACPI: (supports S0 S1 S3 S4 S5)
[17179572.444000] Freeing unused kernel memory: 308k freed
[17179572.468000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179573.512000] Capability LSM initialized
[17179573.548000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM] [20060707]
[17179573.548000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179573.548000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM] [20060707]
[17179573.904000] ICH7: IDE controller at PCI slot 0000:00:1f.1
[17179573.904000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 74
[17179573.904000] ICH7: chipset revision 1
[17179573.904000] ICH7: not 100% native mode: will probe irqs later
[17179573.904000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
[17179573.904000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
[17179573.904000] Probing IDE interface ide0...
[17179574.304000] hda: SONY DVD RW DRU-800A, ATAPI CD/DVD-ROM drive
[17179574.584000] hdb: Maxtor 6Y120P0, ATA DISK drive
[17179574.640000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.648000] Probing IDE interface ide1...
[17179575.224000] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179575.224000] Uniform CD-ROM driver Revision: 3.20
[17179575.236000] hdb: max request size: 128KiB
[17179575.236000] hdb: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(33)
[17179575.236000] hdb: cache flushes supported
[17179575.236000] hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 >
[17179575.636000] SCSI subsystem initialized
[17179575.640000] libata version 1.20 loaded.
[17179575.640000] ata_piix 0000:00:1f.2: version 1.05
[17179575.640000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 23 (level, low) -> IRQ 82
[17179575.640000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179575.640000] ata1: SATA max UDMA/133 cmd 0x5800 ctl 0x5402 bmdma 0x4400 irq 82
[17179575.640000] ata2: SATA max UDMA/133 cmd 0x5000 ctl 0x4802 bmdma 0x4408 irq 82
[17179575.804000] ata1: disabling port
[17179575.804000] scsi0 : ata_piix
[17179575.968000] ata2: disabling port
[17179575.968000] scsi1 : ata_piix
[17179576.000000] IT8212: IDE controller at PCI slot 0000:01:04.0
[17179576.000000] ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 19 (level, low) -> IRQ 193
[17179576.000000] IT8212: chipset revision 17
[17179576.000000] it821x: controller in pass through mode.
[17179576.000000] IT8212: 100% native mode on irq 193
[17179576.000000] ide2: BM-DMA at 0x6400-0x6407, BIOS settings: hde:pio, hdf:pio
[17179576.000000] ide3: BM-DMA at 0x6408-0x640f, BIOS settings: hdg:pio, hdh:pio
[17179576.000000] Probing IDE interface ide2...
[17179576.568000] Probing IDE interface ide3...
[17179577.584000] hdh: TSSTcorpDVD-ROM TS-H352A, ATAPI CD/DVD-ROM drive
[17179577.640000] ide3 at 0x7000-0x7007,0x6802 on irq 193
[17179577.640000] hdh: ATAPI 48X DVD-ROM drive, 512kB Cache
[17179577.812000] Probing IDE interface ide1...
[17179577.832000] usbcore: registered new driver usbfs
[17179577.832000] usbcore: registered new driver hub
[17179577.832000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 90
[17179577.832000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179577.832000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179577.832000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[17179577.832000] ehci_hcd 0000:00:1d.7: debug port 1
[17179577.832000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[17179577.832000] ehci_hcd 0000:00:1d.7: irq 90, io mem 0xcabff800
[17179577.836000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.836000] USB Universal Host Controller Interface driver v3.0
[17179577.836000] usb usb1: configuration #1 chosen from 1 choice
[17179577.836000] hub 1-0:1.0: USB hub found
[17179577.836000] hub 1-0:1.0: 8 ports detected
[17179577.848000] ieee1394: Initialized config rom entry `ip1394'
[17179577.940000] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 98
[17179577.952000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 90
[17179577.952000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179577.952000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179577.952000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[17179577.952000] uhci_hcd 0000:00:1d.0: irq 90, io base 0x00003000
[17179577.952000] usb usb2: configuration #1 chosen from 1 choice
[17179577.952000] hub 2-0:1.0: USB hub found
[17179577.952000] hub 2-0:1.0: 2 ports detected
[17179577.988000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[98] MMIO=[cacdf800-cacdffff] Max Packet=[2048] IR/IT contexts=[4/8]
[17179578.056000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 17 (level, low) -> IRQ 177
[17179578.056000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179578.056000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179578.056000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[17179578.056000] uhci_hcd 0000:00:1d.1: irq 177, io base 0x00003400
[17179578.056000] usb usb3: configuration #1 chosen from 1 choice
[17179578.056000] hub 3-0:1.0: USB hub found
[17179578.056000] hub 3-0:1.0: 2 ports detected
[17179578.160000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179578.160000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179578.160000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179578.160000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[17179578.160000] uhci_hcd 0000:00:1d.2: irq 185, io base 0x00003800
[17179578.160000] usb usb4: configuration #1 chosen from 1 choice
[17179578.160000] hub 4-0:1.0: USB hub found
[17179578.160000] hub 4-0:1.0: 2 ports detected
[17179578.264000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 193
[17179578.264000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179578.264000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179578.264000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[17179578.264000] uhci_hcd 0000:00:1d.3: irq 193, io base 0x00004000
[17179578.264000] usb usb5: configuration #1 chosen from 1 choice
[17179578.264000] hub 5-0:1.0: USB hub found
[17179578.264000] hub 5-0:1.0: 2 ports detected
[17179578.392000] Probing IDE interface ide2...
[17179578.972000] Attempting manual resume
[17179578.980000] ReiserFS: hdb6: found reiserfs format "3.6" with standard journal
[17179579.260000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800006d448a]
[17179580.000000] ReiserFS: hdb6: using ordered data mode
[17179580.020000] ReiserFS: hdb6: journal params: device hdb6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179580.020000] ReiserFS: hdb6: checking transaction log (hdb6)
[17179580.056000] ReiserFS: hdb6: Using r5 hash to sort names
[17179587.904000] parport: PnPBIOS parport detected.
[17179587.904000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[17179587.964000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179587.964000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179587.984000] Linux agpgart interface v0.101 (c) Dave Jones
[17179587.988000] agpgart: Detected an Intel 945G Chipset.
[17179588.008000] agpgart: AGP aperture is 256M @ 0x0
[17179588.020000] Floppy drive(s): fd0 is 1.44M
[17179588.044000] FDC 0 is a post-1991 82077
[17179588.368000] input: PC Speaker as /class/input/input1
[17179588.432000] sata_sil24 0000:02:00.0: version 0.23
[17179588.432000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179588.432000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[17179588.432000] ata3: SATA max UDMA/100 cmd 0xF8AF8000 ctl 0x0 bmdma 0x0 irq 177
[17179588.432000] ata4: SATA max UDMA/100 cmd 0xF8AFA000 ctl 0x0 bmdma 0x0 irq 177
[17179588.496000] Linux video capture interface: v2.00
[17179588.636000] ata3: SATA link down (SStatus 0)
[17179588.636000] scsi2 : sata_sil24
[17179588.664000] nvidia: module license 'NVIDIA' taints kernel.
[17179588.792000] saa7130/34: v4l2 driver version 0.2.14 loaded
[17179588.840000] ata4: SATA link down (SStatus 0)
[17179588.840000] scsi3 : sata_sil24
[17179588.840000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179588.840000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[17179588.840000] sky2 v1.6.1 addr 0xcaefc000 irq 169 Yukon-EC (0xb6) rev 2
[17179588.840000] sky2 eth0: addr 00:15:f2:05:6d:6d
[17179588.840000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 21 (level, low) -> IRQ 98
[17179588.840000] saa7133[0]: found at 0000:01:00.0, rev: 208, irq: 98, latency: 64, mmio: 0xcacdf000
[17179588.840000] saa7133[0]: subsystem: 11bd:002e, board: Pinnacle PCTV 40i/50i/110i (saa7133) [card=77,autodetected]
[17179588.840000] saa7133[0]: board init: gpio is 200c000
[17179588.952000] input: Pinnacle PCTV as /class/input/input2
[17179588.952000] ir-kbd-i2c: Pinnacle PCTV detected at i2c-0/0-0047/ir0 [saa7133[0]]
[17179588.992000] saa7133[0]: i2c eeprom 00: bd 11 2e 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[17179588.992000] saa7133[0]: i2c eeprom 10: ff e0 60 02 ff 20 ff ff ff ff ff ff ff ff ff ff
[17179588.992000] saa7133[0]: i2c eeprom 20: 01 2c 01 02 02 01 04 30 98 ff 00 a0 ff 22 00 c2
[17179588.992000] saa7133[0]: i2c eeprom 30: 96 ff 03 30 15 01 ff ff 0c 22 17 87 03 48 d6 82
[17179588.992000] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179588.992000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179588.992000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179588.992000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179589.012000] tuner: Unknown parameter `#'
[17179589.012000] saa7133[0]: registered device video0 [v4l2]
[17179589.012000] saa7133[0]: registered device vbi0
[17179589.012000] saa7133[0]: registered device radio0
[17179589.012000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 193
[17179589.012000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[17179589.032000] saa7134 ALSA driver for DMA sound loaded
[17179589.032000] saa7133[0]/alsa: saa7133[0] at 0xcacdf000 irq 98 registered as card -1
[17179589.084000] hw_random: RNG not detected
[17179589.192000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[17179589.216000] ts: Compaq touchscreen protocol output
[17179589.388000] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[17179589.604000] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179589.604000] PCI: Setting latency timer of device 0000:08:00.0 to 64
[17179589.604000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon Oct 16 21:56:04 PDT 2006
[17179589.672000] sky2 eth0: enabling interface
[17179589.976000] lp0: using parport0 (interrupt-driven).
[17179589.992000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179589.992000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179590.020000] Adding 1052216k swap on /dev/disk/by-uuid/a5690e05-90bb-4ecc-95a6-37a215c18f07. Priority:-1 extents:1 across:1052216k
[17179590.732000] NET: Registered protocol family 17
[17179591.380000] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[17179593.856000] NET: Registered protocol family 10
[17179593.856000] lo: Disabled Privacy Extensions
[17179593.856000] IPv6 over IPv4 tunneling driver
[17179596.020000] kjournald starting. Commit interval 5 seconds
[17179596.028000] EXT3 FS on hdb7, internal journal
[17179596.028000] EXT3-fs: mounted filesystem with ordered data mode.
[17179596.040000] kjournald starting. Commit interval 5 seconds
[17179596.052000] EXT3 FS on hdb8, internal journal
[17179596.052000] EXT3-fs: mounted filesystem with ordered data mode.
[17179596.088000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179596.148000] NTFS volume version 3.1.
[17179596.992000] pcc_acpi: loading...
[17179597.004000] ACPI: Power Button (FF) [PWRF]
[17179597.004000] ACPI: Power Button (CM) [PWRB]
[17179597.044000] ibm_acpi: ec object not found
[17179597.312000] acpi-cpufreq: CPU0 - ACPI performance management activated.
[17179597.316000] acpi-cpufreq: CPU1 - ACPI performance management activated.
[17179600.864000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179600.864000] apm: disabled - APM is not SMP safe.
[17179603.944000] eth0: no IPv6 routers present
[17179605.736000] Bluetooth: Core ver 2.8
[17179605.736000] NET: Registered protocol family 31
[17179605.736000] Bluetooth: HCI device and connection manager initialized
[17179605.736000] Bluetooth: HCI socket layer initialized
[17179605.764000] Bluetooth: L2CAP ver 2.8
[17179605.764000] Bluetooth: L2CAP socket layer initialized
[17179605.768000] Bluetooth: RFCOMM socket layer initialized
[17179605.768000] Bluetooth: RFCOMM TTY layer initialized
[17179605.768000] Bluetooth: RFCOMM ver 1.7
[17179620.164000] ISO 9660 Extensions: Microsoft Joliet Level 3
[17179620.248000] ISOFS: changing to secondary root

trimaille@kubuntu:~$ lsmod
Module Size Used by
nls_cp437 6912 1
isofs 38076 1
udf 89348 0
rfcomm 42260 0
l2cap 27136 5 rfcomm
bluetooth 53476 4 rfcomm,l2cap
acpi_cpufreq 8644 1
cpufreq_powersave 2944 0
cpufreq_stats 7744 0
cpufreq_userspace 5408 0
cpufreq_ondemand 8876 2
cpufreq_conservative 8712 0
freq_table 6048 2 acpi_cpufreq,cpufreq_stats
tc1100_wmi 8324 0
video 17540 0
battery 11652 0
container 5632 0
sbs 16804 0
button 7952 0
pcc_acpi 14080 0
sony_acpi 6412 0
i2c_ec 6272 1 sbs
ac 6788 0
dev_acpi 12292 0
asus_acpi 17688 0
hotkey 11556 0
nls_utf8 3200 1
ntfs 112116 1
ext3 142856 2
jbd 62228 1 ext3
ipv6 272288 12
af_packet 24584 2
sbp2 24584 0
lp 12964 0
tsdev 9152 0
saa7134_alsa 15648 0
sk98lin 191700 0
snd_hda_intel 20116 0
snd_hda_codec 164608 1 snd_hda_intel
snd_pcm_oss 47360 0
snd_mixer_oss 19584 1 snd_pcm_oss
saa7134 130892 1 saa7134_alsa
snd_pcm 84612 4 saa7134_alsa,snd_hda_intel,snd_hda_codec,snd_pcm
_oss
video_buf 27524 2 saa7134_alsa,saa7134
compat_ioctl32 2304 1 saa7134
snd_timer 25348 1 snd_pcm
ir_kbd_i2c 10128 1 saa7134
nvidia 4554836 12
snd 58372 7 saa7134_alsa,snd_hda_intel,snd_hda_codec,snd_pcm
_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 11232 1 snd
ir_common 35716 2 saa7134,ir_kbd_i2c
snd_page_alloc 11400 2 snd_hda_intel,snd_pcm
i2c_core 23424 4 i2c_ec,saa7134,ir_kbd_i2c,nvidia
videodev 29696 1 saa7134
v4l2_common 18688 2 saa7134,videodev
v4l1_compat 15236 2 saa7134,videodev
psmouse 41352 0
sky2 43012 0
sata_sil24 12932 0
pcspkr 4352 0
serio_raw 8452 0
evdev 11392 1
floppy 63044 0
intel_agp 26012 1
agpgart 34888 2 nvidia,intel_agp
shpchp 42144 0
pci_hotplug 32828 1 shpchp
parport_pc 37796 1
parport 39496 2 lp,parport_pc
reiserfs 263936 1
ohci1394 37040 0
ieee1394 306104 2 sbp2,ohci1394
uhci_hcd 24968 0
ehci_hcd 34696 0
usbcore 134912 3 uhci_hcd,ehci_hcd
ide_generic 2432 0
it821x 9860 0 [permanent]
ata_piix 11780 0
libata 74892 2 sata_sil24,ata_piix
scsi_mod 144648 2 sbp2,libata
ide_disk 18560 6
ide_cd 33696 1
cdrom 38944 1 ide_cd
piix 11780 1
generic 6276 0
thermal 15624 0
processor 31560 2 acpi_cpufreq,thermal
fan 6020 0
fbcon 41504 0
tileblit 3840 1 fbcon
font 9344 1 fbcon
bitblit 7168 1 fbcon
softcursor 3328 1 bitblit
vesafb 9244 0
capability 5896 0
commoncap 8704 1 capability

Wouaf, ca fait long !
Merci Desintegr !

Desintegr · Le 26/04/2007, à 12:27

Ta carte est bien détectée et initialisée.

[17179588.840000] saa7133[0]: subsystem: 11bd:002e, board: Pinnacle PCTV 40i/50i/110i (saa7133) [card=77,autodetected]

Installe le paquet tvtime (dépôt universe).

Lance le, choisis France comme plage de fréquences, et SECAM comme norme de codage. Ensuite lance un scan complet.

Dernière modification par Desintegr (Le 26/04/2007, à 12:28)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 24/04/2007, à 09:41

Pinnacle PCTV 40i

#2 Le 26/04/2007, à 11:15

Re : Pinnacle PCTV 40i

#3 Le 26/04/2007, à 12:11

Re : Pinnacle PCTV 40i

#4 Le 26/04/2007, à 12:23

Re : Pinnacle PCTV 40i

#5 Le 26/04/2007, à 12:27

Re : Pinnacle PCTV 40i

Pied de page des forums