#1 Le 26/04/2007, à 15:19
- uz
[RESOLU]Impossible de lancer jack
Bonjour,
J'ai beaucoup cherché, mais ne parviens pas à résoudre ce problème:
14:53:20.257 Could not connect to JACK server as client. Please check the messages window for more info.
loading driver ..
apparent rate = 44100
creating alsa driver ... hw:0|hw:0|128|2|44100|0|3|nomon|swmeter|-|32bit
control device hw:0
configuring for 44100Hz, period = 128 frames, buffer = 2 periods
ALSA: final selected sample format for capture: 32bit little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 32bit little-endian
ALSA: cannot set channel count to 3 for playback
ALSA: cannot configure playback channel
cannot load driver module alsa
ce que j'ai fait:
J'ai installé un noyau real-time comme vu ici http://www.linuxmao.org/tikiwiki/tiki-i … isty_7_04_
(voire: note pour feisty) --> Ce qui m'a réglé mon problème principal, de ralentissement d'Hydrogen (pas top, une batterie qu'a pas le tempo )
J'ai configuré (sans rien capter ou presque) comme ici (configuration de PAM):
http://www.linuxmao.org/tikiwiki/tiki-i … plications
Ce qui me donne:
# /etc/security/limits.conf
#
#Each line describes a limit for a user in the form:
#
#<domain> <type> <item> <value>
#
#Where:
#<domain> can be:
# - an user name
# - a group name, with @group syntax
# - the wildcard *, for default entry
# - the wildcard %, can be also used with %group syntax,
# for maxlogin limit
#
#<type> can have the two values:
# - "soft" for enforcing the soft limits
# - "hard" for enforcing hard limits
#
#<item> can be one of the following:
# - core - limits the core file size (KB)
# - data - max data size (KB)
# - fsize - maximum filesize (KB)
# - memlock - max locked-in-memory address space (KB)
# - nofile - max number of open files
# - rss - max resident set size (KB)
# - stack - max stack size (KB)
# - cpu - max CPU time (MIN)
# - nproc - max number of processes
# - as - address space limit
# - maxlogins - max number of logins for this user
# - maxsyslogins - max number of logins on the system
# - priority - the priority to run user process with
# - locks - max number of file locks the user can hold
# - sigpending - max number of pending signals
# - msgqueue - max memory used by POSIX message queues (bytes)
# - nice - max nice priority allowed to raise to
# - rtprio - max realtime priority
#
#<domain> <type> <item> <value>
#
#* soft core 0
#* hard rss 10000
#@student hard nproc 20
#@faculty soft nproc 20
#@faculty hard nproc 50
#ftp hard nproc 0
#@student - maxlogins 4
# Support Temps réel pour le groupe audio
@audio - rtprio 100
@audio - nice -10
@audio - memlock 250000 #(à adapter; pour une valeur sans limite :"unlimited")
# End of file
J'ai installé tous les "ubuntustudios".
J'ai aussi essayé:
killall esd
avant de lancer jack
Voila, donc je trouve pas la solution.
Quelqu'un pourrait m'aider?
Je précise que que c'est pour un usage purement "de base, je fais du bruit dans ma maison".
Dernière modification par uz (Le 28/04/2007, à 13:20)
Hors ligne
#2 Le 28/04/2007, à 11:57
- uz
Re : [RESOLU]Impossible de lancer jack
Upla!
Hors ligne
#3 Le 28/04/2007, à 12:20
- legreffier
Re : [RESOLU]Impossible de lancer jack
"ALSA: cannot set channel count to 3 for playback
ALSA: cannot configure playback channel
cannot load driver module alsa"
Les erreurs sont très claires : tu demandes a ta Jack de tourner sur 3 canaux, ta carte ne peut apparemment pas les gérer (ou en tout cas Jack) ce qui rend la config impossible : donc plantage.
Va dans le setup de qjackctl et choisis "2" pour "playback channel".
Cordialement.
Hors ligne
#4 Le 28/04/2007, à 13:19
- uz
Re : [RESOLU]Impossible de lancer jack
Tellement simple ...
Merci l'ami!!
Hors ligne