Pages : 1
#1 Le 26/04/2007, à 21:06
- fdupin
Beryl n aime pas ma config !
Bonjour,
J viens d essayer de faire tourner beryl en suivant le tuto beryl_feisty et lors du test (beryl --test-only) J ai ca qui s affiche :
**************************************************************
* Beryl system compatiblity check *
**************************************************************
Detected xserver : AIGLX
Checking Display :0 ...
Checking for XComposite extension : failed
No composite extensionUn glxinfo | grep "direct rendering":
direct rendering: Yes
J avoue que j ai du mal a comprendre. Je tourne sous kubuntu feisty 7.04, j ai une ati radeon x800 GTO. J ai installé le driver avec Envy 0.92 (sans probleme).
j mets mon xorg.cong si ca peut aider :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "int10"
Load "vbe"
Load "v4l"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "BENQ T905"
ModelName "Custom 1"
Gamma 1
ModeLine "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480@72" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480@75" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480@85" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "832x624@75" 57.3 832 864 928 1152 624 625 628 667 -hsync -vsync
ModeLine "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
ModeLine "1280x960@85" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024@85" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x960@75" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1400x1050@60" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050@75" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200@75" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200@70" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1856x1392@60" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1920x1440@60" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "2048x1536@60" 266.9 2048 2200 2424 2800 1536 1537 1540 1589 -hsync +vsync
EndSection
Section "Monitor"
#
Identifier "monitor1"
Gamma 1
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI RADEON X800 GTO"
Driver "ati"
BoardName "ati"
Option "MergedFB" "off"
BusID "PCI:1:0:0"
EndSection
Section "Device"
#
Identifier "device1"
Driver "ati"
BoardName "ati"
Option "MergedFB" "off"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI RADEON X800 GTO"
Monitor "BENQ T905"
DefaultDepth 24
SubSection "Display"
Virtual 2048 1536
Depth 24
Modes "1280x1024@75" "1280x960@60" "1152x864@75" "1280x960@85" "1024x768@43" "1280x1024@85" "1024x768@60" "1280x1024@60" "1024x768@70" "1280x960@75" "1024x768@75" "1400x1050@60" "1024x768@85" "1400x1050@75" "832x624@75" "1600x1200@65" "800x600@60" "1600x1200@60" "800x600@85" "1600x1200@75" "800x600@75" "1600x1200@70" "800x600@72" "1792x1344@60" "800x600@56" "1856x1392@60" "640x480@85" "1920x1440@60" "640x480@75" "2048x1536@60" "640x480@72" "640x480@60"
EndSubSection
EndSection
Section "Screen"
#
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultDepth 24
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSectionSi quelqu un voit d ou vient le probleme ce serait cool 
Dernière modification par fdupin (Le 26/04/2007, à 21:12)
Hors ligne
#2 Le 26/04/2007, à 21:17
- ben13
Re : Beryl n aime pas ma config !
Section "Extensions"
Option "Composite" "Disable"
EndSection
faut pas que le composite soit enable par hasard ? 
Ubuntu 12.04.01 LTS 64 Bits.
Hors ligne
#3 Le 26/04/2007, à 21:30
- fdupin
Re : Beryl n aime pas ma config !
Ok on progresse j ai mis Enable et maintenant mon test beryl me dit :
**************************************************************
* Beryl system compatiblity check *
**************************************************************
Detected xserver : AIGLX
Checking Display :0 ...
Checking for XComposite extension : passed (v0.3)
Checking for XDamage extension : passed
Checking for RandR extension : passed
Checking for XSync extension : passed
Checking Screen 0 ...
Xlib: extension "GLX" missing on display ":0.0".
Root visual is not a GL visualFaut il que j installe glx ?
faut t il que je desisntalle aiglx et que j installe glx ?
pour tant d apres ce que j ai compris aiglx et glx sont accelaration 3d differentes
Dernière modification par fdupin (Le 26/04/2007, à 21:37)
Hors ligne
#4 Le 26/04/2007, à 21:37
- nikko
Re : Beryl n aime pas ma config !
Bonsoir,
il te manque "load glx" dans la section module.
Va faire un tour sur le tuto aiglx :
http://doc.ubuntu-fr.org/aiglx
La section module doit contenir:
Section "Module"
# Load "GLcore"
Load "bitmap"
Load "ddc"
Load "dbe"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Nikko
Hors ligne
#5 Le 26/04/2007, à 22:01
- fdupin
Re : Beryl n aime pas ma config !
J ai avance grace a vous
Mon nouveau beryl test :
**************************************************************
* Beryl system compatiblity check *
**************************************************************
Detected xserver : AIGLX
Checking Display :0 ...
Checking for XComposite extension : passed (v0.3)
Checking for XDamage extension : passed
Checking for RandR extension : passed
Checking for XSync extension : passed
Checking Screen 0 ...
Checking for GLX_SGIX_fbconfig : passed
Checking for GLX_EXT_texture_from_pixmap : passed
Xlib: extension "XFree86-DRI" missing on display ":0.0".
Checking for non power of two texture support : failed
Support for non power of two textures missingMon xorg.conf :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Option "AIGLX" "true"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dbe"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
Load "v4l"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "BENQ T905"
ModelName "Custom 1"
Gamma 1
ModeLine "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480@72" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480@75" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480@85" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "832x624@75" 57.3 832 864 928 1152 624 625 628 667 -hsync -vsync
ModeLine "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
ModeLine "1280x960@85" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024@85" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x960@75" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1400x1050@60" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050@75" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200@75" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200@70" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1856x1392@60" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1920x1440@60" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "2048x1536@60" 266.9 2048 2200 2424 2800 1536 1537 1540 1589 -hsync +vsync
EndSection
Section "Monitor"
#
Identifier "monitor1"
Gamma 1
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI RADEON X800 GTO"
Driver "ati"
BoardName "ati"
Option "XAANoOffscreenPixmaps"
BusID "PCI:1:0:0"
EndSection
Section "Device"
#
Identifier "device1"
Driver "ati"
BoardName "ati"
Option "MergedFB" "off"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI RADEON X800 GTO"
Monitor "BENQ T905"
DefaultDepth 24
SubSection "Display"
Virtual 2048 1536
Depth 24
Modes "1280x1024@75" "1280x960@60" "1152x864@75" "1280x960@85" "1024x768@43" "1280x1024@85" "1024x768@60" "1280x1024@60" "1024x768@70" "1280x960@75" "1024x768@75" "1400x1050@60" "1024x768@85" "1400x1050@75" "832x624@75" "1600x1200@65" "800x600@60" "1600x1200@60" "800x600@85" "1600x1200@75" "800x600@75" "1600x1200@70" "800x600@72" "1792x1344@60" "800x600@56" "1856x1392@60" "640x480@85" "1920x1440@60" "640x480@75" "2048x1536@60" "640x480@72" "640x480@60"
EndSubSection
EndSection
Section "Screen"
#
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultDepth 24
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionJ ai suivi le tuto pour le modifier maintenant ce que je trouve bizarre c est que j ai 3 section device...
Est ce que dois supprimer les 2 dernieres ?
Dernière modification par fdupin (Le 26/04/2007, à 22:03)
Hors ligne
#6 Le 26/04/2007, à 22:53
- fdupin
Re : Beryl n aime pas ma config !
Aux dernieres nouvelles j en suis la :
beryl test :
**************************************************************
* Beryl system compatiblity check *
**************************************************************
Detected xserver : AIGLX
Checking Display :0 ...
Checking for XComposite extension : passed (v0.3)
Checking for XDamage extension : passed
Checking for RandR extension : passed
Checking for XSync extension : passed
Checking Screen 0 ...
Checking for GLX_SGIX_fbconfig : passed
Checking for GLX_EXT_texture_from_pixmap : passed
Xlib: extension "XFree86-DRI" missing on display ":0.0".
Checking for non power of two texture support : failed
Support for non power of two textures missingMon xorg.conf :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Option "AIGLX" "true"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dbe"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
Load "v4l"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "BENQ T905"
ModelName "Custom 1"
Gamma 1
ModeLine "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480@72" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480@75" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480@85" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "832x624@75" 57.3 832 864 928 1152 624 625 628 667 -hsync -vsync
ModeLine "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
ModeLine "1280x960@85" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024@85" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x960@75" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1400x1050@60" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050@75" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200@75" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200@70" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1856x1392@60" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1920x1440@60" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "2048x1536@60" 266.9 2048 2200 2424 2800 1536 1537 1540 1589 -hsync +vsync
EndSection
Section "Monitor"
#
Identifier "monitor1"
Gamma 1
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI RADEON X800 GTO"
Driver "ati"
BoardName "ati"
Option "MergedFB" "off"
BusID "PCI:1:0:0"
EndSection
Section "Device"
#
Identifier "device1"
Driver "ati"
BoardName "ati"
Option "MergedFB" "off"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "XAANoOffscreenPixmaps"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI RADEON X800 GTO"
Monitor "BENQ T905"
DefaultDepth 24
SubSection "Display"
Virtual 2048 1536
Depth 24
Modes "1280x1024@75" "1280x960@60" "1152x864@75" "1280x960@85" "1024x768@43" "1280x1024@85" "1024x768@60" "1280x1024@60" "1024x768@70" "1280x960@75" "1024x768@75" "1400x1050@60" "1024x768@85" "1400x1050@75" "832x624@75" "1600x1200@65" "800x600@60" "1600x1200@60" "800x600@85" "1600x1200@75" "800x600@75" "1600x1200@70" "800x600@72" "1792x1344@60" "800x600@56" "1856x1392@60" "640x480@85" "1920x1440@60" "640x480@75" "2048x1536@60" "640x480@72" "640x480@60"
EndSubSection
EndSection
Section "Screen"
#
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultDepth 24
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionDe plus j ai remarque quer depuis les modifs j ai mon glxgears qui me donne :
Xlib: extension "XFree86-DRI" missing on display ":0.0".
1848 frames in 5.2 seconds = 357.347 FPS
2599 frames in 5.1 seconds = 510.452 FPS
1243 frames in 5.1 seconds = 242.107 FPSet autant dire que l anim rame a mort....
en plus j ai mon xorg.cong qui contient 3 Section "Device" ce qui je pense n est pas tres normal.
Bref, j suis paumé, et j sais plus quoi faire
Dernière modification par fdupin (Le 27/04/2007, à 13:50)
Hors ligne
#7 Le 27/04/2007, à 09:22
- fdupin
Re : Beryl n aime pas ma config !
up!
Hors ligne
#8 Le 27/04/2007, à 15:25
- nikko
Re : Beryl n aime pas ma config !
Apparemment aiglx ne fonctionne pas avec ta carte...
Tu peux te rapprocher de Daminou75 qui fait tourner feisty+xgl+compiz:
http://forum.ubuntu-fr.org/viewtopic.php?id=113990
Et pour tes sections monitor, device et screen tu dois pouvoir faire le ménage effectivement.
Hors ligne
#9 Le 27/04/2007, à 17:05
- fdupin
Re : Beryl n aime pas ma config !
Ok donc ca veut dire que je dois installer xgl mais faut il que je desinstalle mon driver ?(installé avec envy)
Hors ligne
#10 Le 27/04/2007, à 19:52
- nikko
Re : Beryl n aime pas ma config !
Non je ne crois pas. Tu peux demander son xorg.conf à Daminou75. Tu verras bien comme ça.
Hors ligne
#11 Le 27/04/2007, à 20:06
- fdupin
Re : Beryl n aime pas ma config !
Au final j ai reinstallé parce que mon xorg.conf etait trop bizarre. et j ai un driver ati d installé mais je ne sais pas comment faire pour savoir si il est bon
Hors ligne
Pages : 1