Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 30/04/2007, à 13:30

benichoukkke

probleme direct rendering:no ati radeon 9200 SE

Bonjour a tous smile

Après être passe à feisty l'autre jour, premier demarrage severX plante ok... je reconfigue xorg.conf et ca roule mais voila.... je me suis rendu compte en tapant glxinfo que la valeur de direct rendering était a "no"....je me suis alors un petit peu documente... j'ai installe les drivers libres comme indique ds la doc de ubuntu... rien n'y fait.... j'ai remis l'ancien libGL.so.1.2 ds /usr/lib/... ca marche tjs pas....

voici mon fichier xorg.conf :

Section "Files"
        FontPath        "/usr/share/fonts/X11/misc"
        FontPath        "/usr/share/fonts/X11/cyrillic"
        FontPath        "/usr/share/fonts/X11/100dpi/:unscaled"
        FontPath        "/usr/share/fonts/X11/75dpi/:unscaled"
        FontPath        "/usr/share/fonts/X11/Type1"
        FontPath        "/usr/share/fonts/X11/100dpi"
        FontPath        "/usr/share/fonts/X11/75dpi"
        # path to defoma fonts
        FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load    "i2c"
        Load    "bitmap"
        Load    "ddc"
        Load    "dri"
        Load    "extmod"
        Load    "freetype"
        Load    "glx"
        Load    "int10"
        Load    "type1"
        Load    "vbe"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc104"
        Option          "XkbLayout"     "us"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ImPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Emulate3Buttons"       "true"
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "stylus"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"          "stylus"
        Option          "ForceDevice"   "ISDV4"         # Tablet PC ONLY
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "eraser"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"          "eraser"
        Option          "ForceDevice"   "ISDV4"         # Tablet PC ONLY
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "cursor"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"          "cursor"
        Option          "ForceDevice"   "ISDV4"         # Tablet PC ONLY
EndSection

Section "Device"
        Identifier      "ATI Technologies Inc RV280 [Radeon 9200 SE]"
        Driver          "radeon"
        Option          "AGPMode" "4"
        Option          "AGPSize" "64" # default: 8
        Option          "RingSize" "8"
        Option          "BufferSize" "2"
        Option          "EnablePageFlip" "true"
        Option          "EnableDepthMoves" "true"
        Option          "RenderAccel" "true"
        BusID           "PCI:1:0:0"
EndSection

Section "Monitor"
        Identifier      "PULSAR"
        Option          "DPMS"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "ATI Technologies Inc RV280 [Radeon 9200 SE]"
        Monitor         "PULSAR"
        DefaultDepth    24
        SubSection "Display"
                Depth           1
                Modes           "1024x768" "832x624" "800x600" "720x400" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           4
                Modes           "1024x768" "832x624" "800x600" "720x400" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           8
                Modes           "1024x768" "832x624" "800x600" "720x400" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           15
                Modes           "1024x768" "832x624" "800x600" "720x400" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           16
                Modes           "1024x768" "832x624" "800x600" "720x400" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           24
                Modes           "1024x768" "832x624" "800x600" "720x400" "640x480"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"
        InputDevice     "stylus"        "SendCoreEvents"
        InputDevice     "cursor"        "SendCoreEvents"
        InputDevice     "eraser"        "SendCoreEvents"
EndSection

Section "DRI"
        Mode    0666
EndSection

Section "Extensions"
         Option "RENDER" "Enable" 
EndSection

ainsi les (WW) du fichier log : 

(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32

voila j'espère qu'il ne vous manque pas d'infos

d'avance merci smile

Ben

Dernière modification par benichoukkke (Le 30/04/2007, à 14:33)

Hors ligne

#2 Le 02/05/2007, à 20:09

benichoukkke

Re : probleme direct rendering:no ati radeon 9200 SE

pas d'idée ? neutral

Hors ligne

#3 Le 02/05/2007, à 20:37

alexisj

Re : probleme direct rendering:no ati radeon 9200 SE

Chez moi ca marche... (ati radeon 9200 avec driver libre radeon)

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "Extensions"
        Option "RENDER" "Enable"
EndSection

Section "DRI"
	Mode	0666
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbVariant"	"latin9"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. RV280 [Radeon 9200 PRO]"
	Driver		"radeon"
	BusID		"PCI:1:0:0"
#	Option		"XAANoOffscreenPixmaps"			# Faster RENDER acceleration			###
#	VideoRam	131072			# 128 MB VRAM							###
	Option		"AccelMethod"		"XAA"   	# Use XFree86 Acceleration Architecture  	#
	Option		"AccelDFS"		"0" 		# pour ATI 9250
	Option		"AGPMode"		"8"     	# AGP- 8 fonctionne mois bien
	Option		"AGPSize"		"128"    	# AGP aperture size - 128 fonctionne moins bien
	Option		"GARTSize"		"64"		# TEST
	Option		"RingSize"		"8"
	Option		"BufferSize"		"2"
	Option		"EnablePageFlip"	"1"		# Enable page flipping for 3D apps
	Option		"ColorTiling"		"1"
	Option		"EnableDepthMoves"	"yes"
	Option		"UseFBDev"     		"false"
	Option		"RenderAccel"   	"true"  	# Enable the hardware render acceleration
	Option		"mtrr"			"on"
	Option 		"SubPixelOrder" 	"none"
	Option 		"DynamicClocks" 	"on"
#	Option		"BackingStore"  	"true"		# Faster double buffering			###
	Option		"DPMS"
	Option		"DRI"			"true"
EndSection

Section "Monitor"
	Identifier	"AL1715"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. RV280 [Radeon 9200 PRO]"
	Monitor		"AL1715"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection

	Option    "AddARGBGLXVisuals"    "True"
	Option "DisableGLXRootClipping" "True"
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
	
	option "offtime" "30" 
	Option "AIGLX" "true"		 # Nécessaire pour beryl
EndSection

Hors ligne

Pages : 1