Ubuntu-fr

axel_

[résolu] PB xorg.conf : resolution ?

Salut a tous...

j'ai un souci qui m'enerve un peu :

la plupart de mes jeux m'affiche un bel ecran noir en full screen...
g un compaq R3332 avec un ecran widescreen...

mon xorg.conf est construit a partir de pas mal de xorg.conf trouvé a droite à gauche, mais sans que je sache trop ce que je fait...

ma question est donc : la section "Mode" serait elle pas un peu batarde, ce qui expliquerai que mes jeux m'affichent un bel ecran noir ?

(je precise quand meme : ils sont jouable quand je branche un ecran externe, donc, je pense que c xorg.conf qui va pas...)

quelqu'un aurait il une idée ?

# xorg pour R3332
 
Section "ServerLayout"
 	Identifier     "Default Layout"
 	Screen      0  "WXGA LCD" 0 0
	InputDevice    "Mouse"      "CorePointer"
	InputDevice    "Alps TouchPad" "AlwaysCore"
 	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

[...]

Section "Modes"
 	Identifier     "Modes[0]" 

#y'aurait pas un bug, la ?? / il faudrait pas rajouter "800x600" et compagnie, comme plus bas, dans Section Screen ? si oui, comment ? :

	ModeLine     "1280x800" 77.7 1280 1344 1480 1680 800 801 804 826 -hsync -vsync


EndSection
 
Section "Monitor"
 	Identifier   "Monitor0"
 	VendorName   "Monitor Vendor"
 	ModelName    "LCD Panel 1280 x 800"
 	UseModes     "Modes[0]"
 	HorizSync    31.5 - 48.5
 	VertRefresh  40.0 - 70.0
 	Option	    "CalcAlgorithm" "CheckDesktopGeometry"
 	Option	    "dpms"
EndSection
 
Section "Device"
 	Identifier  "Videocard0"
 	Driver      "nvidia"             #replace nv driver
 	VendorName  "NVIDIA"
 	BoardName   "NVIDIA GeForce 4 (generic)"
 	Option	    "FlatPanelProperties" "Scaling = aspect-scaled"
 	Option	    "NoLogo" "1"         #set to 0 to see NVidia splash screen
 	Option	    "IgnoreEDID" "1"
EndSection
 
Section "Screen"
 	Identifier "WXGA LCD"
 	Device     "Videocard0"
 	Monitor    "Monitor0"
 	DefaultDepth     24
 	SubSection "Display"
 		Viewport   0 0
 		Depth     24
 		Modes    "1280x800" "1024x768" "800x600"
	EndSubSection
EndSection
 
Section "DRI"
 	Group        0
 	Mode         0666
EndSection

Dernière modification par axel_ (Le 10/09/2005, à 04:41)

---

L'IUP Management de Lyon 1, c'est la >> http://www.iupy.net

axel_

Re : [résolu] PB xorg.conf : resolution ?

up ?

---

L'IUP Management de Lyon 1, c'est la >> http://www.iupy.net

axel_

Re : [résolu] PB xorg.conf : resolution ?

merci qd meme... :/

---

L'IUP Management de Lyon 1, c'est la >> http://www.iupy.net

Lilian

Re : [résolu] PB xorg.conf : resolution ?

j'ai résolu ce même problème en utilisant çe fichier
http://myblog.roadtothefuture.net/docs/xorg.conf

contenu:

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
        # paths to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection
# xorg pour R3332
 
Section "ServerLayout"
 	Identifier     "Default Layout"
 	Screen      0  "WXGA LCD" 0 0
	InputDevice    "Mouse"      "CorePointer"
	InputDevice    "Touchpad" "AlwaysCore"
 	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection
 
Section "Module"
	Load  "synaptics"
 	Load  "dbe"
 	Load  "extmod"
 	Load  "fbdevhw"
 	Load  "glx"
 	Load  "record"
 	Load  "freetype"
 	Load  "type1"
        Load  "dri"
EndSection
 
Section "InputDevice"
 	Identifier  "Keyboard0"
 	Driver      "kbd"
 	Option	    "XkbModel" "pc105"
 	Option	    "XkbLayout" "fr"
EndSection
 
Section "InputDevice"
 	Identifier	"Mouse"
 	Driver		"mouse"
 	Option		"CorePointer"
 	Option		"Device"		"/dev/input/mice"
 	Option		"Protocol"		"ImPS/2"
 	Option		"Emulate3Buttons"	"true"
 	Option		"ZAxisMapping"		"4 5"
EndSection

Section "InputDevice"
	Identifier	"Touchpad"
	Driver		"synaptics"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/event1"
	Option		"Protocol"		"event"
	Option		"LeftEdge"		"60"
	Option		"RightEdge"		"830"
	Option		"TopEdge"		"70"
	Option		"BottomEdge"		"650"
	Option		"FingerLow"		"25"
	Option		"FingerHigh"		"30"
	Option		"MaxTapTime"		"180"
	Option		"MaxTapMove"		"110"
	Option		"EmulateMidButtonTime"	"75"
	Option		"VertScrollDelta"	"50"
	Option		"HorizScrollDelta"	"50"
	Option		"MinSpeed"		"0.2"
	Option		"MaxSpeed"		"0.5"
	Option		"AccelFactor"		"0.01"
	Option		"EdgeMotionSpeed"	"40"
	Option		"UpDownScrolling"	"1"
	Option		"TouchpadOff"	"0"
EndSection


Section "Modes"
 	Identifier     "Modes[0]"
	ModeLine     "1280x800" 77.7 1280 1344 1480 1680 800 801 804 826 -hsync -vsync
EndSection
 
Section "Monitor"
 	Identifier   "Monitor0"
 	VendorName   "Monitor Vendor"
 	ModelName    "LCD Panel 1280 x 800"
 	UseModes     "Modes[0]"
 	HorizSync    31.5 - 48.5
 	VertRefresh  40.0 - 70.0
 	Option	    "CalcAlgorithm" "CheckDesktopGeometry"
 	Option	    "dpms"
EndSection
 
Section "Device"
 	Identifier  "Videocard0"
 	Driver      "nvidia"             #replace nv driver
 	VendorName  "NVIDIA"
 	BoardName   "NVIDIA GeForce 4 (generic)"
 	Option	    "FlatPanelProperties" "Scaling = aspect-scaled"
 	Option	    "NoLogo" "1"         #set to 0 to see NVidia splash screen
 	Option	    "IgnoreEDID" "1"
EndSection
 
Section "Screen"
 	Identifier "WXGA LCD"
 	Device     "Videocard0"
 	Monitor    "Monitor0"
 	DefaultDepth     24
 	SubSection "Display"
 		Viewport   0 0
 		Depth     24
 		Modes    "1280x800" "1024x768" "800x600"
	EndSubSection
EndSection
 
Section "DRI"
 	Group        0
 	Mode         0666
EndSection

dawar

Re : [résolu] PB xorg.conf : resolution ?

Merci de donner la solution, mais pense aussi a mettre [résolu] dans le titre la prochaine fois

---

S'il n'y a pas de solution, c'est qu'il n'y a pas de problème (Devise Shadoks)