#1 Le 02/06/2007, à 16:11
- Bogoris
[Résolu] Nvidia 6600 NX - Pb ac l'accélération graphique
Bonjour,
Mecredi dernier (2007/05/30), j'ai installé Ubuntu Studio 7.04 sur le PC d'un ami. Tout s'est bien passé mis à part l'accélération graphique qui refuse de fonctionner. J'ai d'abord fait, il me semble l'erreur (?) d'installer un paquet, nvidia-glx-new il me semble, mais c'était peut-être nvidia-glx. Au redémarrage (simple ou du serveur X, je ne sais plus), je n'avais plus d'accès à accéder à l'interface graphique, et comme je n'avais pas fait de sauvegarde de son /etc/X11/xorg.conf, j'ai dû aller le bidouiller pour remplacer
Driver "nvidia"
par
Driver "vesa"
Bref, j'ai finalement réussi à avoir une interface graphique, mais lorsque j'ai essayé de réinstaller le driver avec, cette fois-ci, le Gestionnaire de pilotes propriétaires, cela m'a fait la même chose.
Quelqu'un aurait-il une idée ?
Merci d'avance.
Amicalement,
Bogoris
Dernière modification par Bogoris (Le 15/06/2007, à 15:43)
Hors ligne
#3 Le 02/06/2007, à 18:46
- bishop
Re : [Résolu] Nvidia 6600 NX - Pb ac l'accélération graphique
Salut Bogoris
J'utilise une Nvidia 6600 GT avec le driver nvidia-glx-new sans PB.
Et, bien sûr, dans le /etc/X11/xorg.conf, c'est nvidia.
Poste le fichier /etc/X11/xorg.conf.
La plus grande surprise que puisse faire un con c'est de faire une pause.
Hors ligne
#4 Le 11/06/2007, à 16:08
- Bogoris
Re : [Résolu] Nvidia 6600 NX - Pb ac l'accélération graphique
[EDIT]Mon pote vient de me signaler qu'en fait ce n'était pas une 6600 GT mais une 6600 NX.[/EDIT]
Bonjour,
Retour de la commande lspci :
00:00.0 Host bridge: ALi Corporation M1689 K8 Northbridge [Super K8 Single Chip]
00:01.0 PCI bridge: ALi Corporation AGP8X Controller
00:02.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge
00:03.0 ISA bridge: ALi Corporation M1563 HyperTransport South Bridge (rev 70)
00:03.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
00:04.0 Multimedia audio controller: ALi Corporation M5455 PCI AC-Link Controller Audio Device (rev 20)
00:0d.0 Ethernet controller: ALi Corporation ULi 1689,1573 integrated ethernet. (rev 40)
00:0e.0 IDE interface: ALi Corporation M5229 IDE (rev c7)
00:0e.1 Mass storage controller: ALi Corporation ULi 5289 SATA (rev 10)
00:0f.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:0f.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:0f.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:0f.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT] (rev a2)
Fichier /etc/X11/xorg.conf :
Section "Files"
Fontpath "/usr/share/fonts/X11/misc"
Fontpath "/usr/share/fonts/X11/cyrillic"
Fontpath "/usr/share/fonts/X11/100dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/75dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/Type1"
Fontpath "/usr/share/fonts/X11/100dpi"
Fontpath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
Fontpath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "oss"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Device"
Identifier "Carte vidéo générique"
Driver "vesa"
Busid "PCI:1:0:0"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
EndSection
Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
Horizsync 28-80
Vertrefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Carte vidéo générique"
Monitor "Écran générique"
Defaultdepth 24
SubSection "Display"
Depth 1
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "stylus" "SendCoreEvents"
Inputdevice "cursor" "SendCoreEvents"
Inputdevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Merci d'avance
Dernière modification par Bogoris (Le 11/06/2007, à 16:26)
Hors ligne
#5 Le 13/06/2007, à 10:55
- bishop
Re : [Résolu] Nvidia 6600 NX - Pb ac l'accélération graphique
Salut Bogoris
A voir le retour de la commande lspci :
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT] (rev a2)
Ca ne change pas grand chose que ce soit une 6600 NX.
Je te joins, pour info, mon xorg.conf, à ne pas copier, car configuré pour XGL, Beryl et Compiz (XGL/Beryl sur une session, Compiz sur une autre session).
Vu que je ne connais pas trop la config, les drivers, etc... pour Athlon64, je préfère ne pas te conseiller (je tourne avec un AMD 2400 XP).
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Thu Nov 9 17:55:20 PST 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dbe"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "F900B"
Option "DPMS"
HorizSync 30-98
VertRefresh 50-160
EndSection
Section "Device"
Identifier "nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT]"
Driver "nvidia"
BusID "PCI:2:0:0"
VideoRam 262144
Option "AddARGBGLXVisuals" "true"
Option "AllowGLXWithComposite" "true"
Option "TripleBuffer" "true"
Option "RenderAccel" "true"
Option "NoLogo"
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "true"
Option "DAMAGE" "true"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT]"
Monitor "F900B"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Dernière modification par bishop (Le 15/06/2007, à 18:03)
La plus grande surprise que puisse faire un con c'est de faire une pause.
Hors ligne
#6 Le 13/06/2007, à 15:06
- Bogoris
Re : [Résolu] Nvidia 6600 NX - Pb ac l'accélération graphique
Si je fais un copier/coller de la section "Device", ça peut pas le faire ?
Hors ligne
#7 Le 13/06/2007, à 17:21
- bishop
Re : [Résolu] Nvidia 6600 NX - Pb ac l'accélération graphique
1 - Tu peux essayer pour la section "Device" en remplaçant la ligne :
Busid "PCI:2:0:0"
par :
Busid "PCI:1:0:0"
vu que la carte tourne sur ce BUS.
-
-
2 - Essayer aussi en supprimant la section "Dri" en bas de page.
-
-
3 - Je vois aussi que dans la section "Modules", j'ai en plus :
Load "dbe"
Essaie également cette possibilité.
-
-
Tape nvidia en recherche dans Synaptic et vérifie que la version de nvidia-glx-new correspond bien à la version du linux-restricted-modules-(version)...
et que tout cela correspond bien à la version du noyau linux installé (linux-image..., linux-header..., etc...).
Dernière modification par bishop (Le 13/06/2007, à 17:50)
La plus grande surprise que puisse faire un con c'est de faire une pause.
Hors ligne
#8 Le 13/06/2007, à 18:05
- Bogoris
Re : [Résolu] Nvidia 6600 NX - Pb ac l'accélération graphique
Ok, merci, je lui dirai de faire ça quand je le verrai
Hors ligne
#9 Le 13/06/2007, à 18:11
- bishop
Re : [Résolu] Nvidia 6600 NX - Pb ac l'accélération graphique
A plus... pour des news.
La plus grande surprise que puisse faire un con c'est de faire une pause.
Hors ligne
#10 Le 15/06/2007, à 15:35
- Bogoris
Re : [Résolu] Nvidia 6600 NX - Pb ac l'accélération graphique
Bon alors j'ai fait comme tu as dit : les deux premiers trucs n'ont rien changé, le troisième a fait planté son serveur graphique
J'ai donc réinstallé à tout hasard nvidia-glx-new et j'ai lu dans sa description un truc que je n'avais pas vu jusqu'alors :
To enable the driver, run "sudo nvidia-glx-config enable".
J'ai donc fait ce qu'il m'a demandé (je suis obéissant ) :
jonathan@ubuntu:~$ sudo nvidia-glx-config enable
Password:
Et là, c'est le drame :
Error: your X configuration has been altered.
This script cannot proceed automatically. If you believe that this
not correct, you can update the md5sum entry executing the following
command:
md5sum /etc/X11/xorg.conf | sudo tee /var/lib/x11/xorg.conf.md5sum
otherwise edit manually /etc/X11/xorg.conf to change the Driver section
from nv to nvidia.
Sinon concernant ce que tu m'avais demandé, voici une liste :
* nvidia-glx-new : 1.0.9755+2.6.20.5-16.28
* linux-restricted-modules-generic : 2.6.20.5-16.28.1
* linux-image-2.6.20-16-generic : 2.6.20.5-16.29
* linux-headers-2.6.20-16 : 2.6.20.5-16.229
* linux-headers-generic : 2.6.20.5-16.28.1
Amicalement,
Bogoris
[EDIT 15:40]Je viens de restaurer mon /etc/X11/xorg.conf (celui que je vous avais donné), installé nvidia-glx-new, peut-être tappé sudo nvidia-glx-config enable, relancé le serveur graphique et... ça marche ! Merci beaucoup à tout le monde, problème résolu et à déplacer dans Serveurs graphiques et cartes vidéo svp [/EDIT]
Dernière modification par Bogoris (Le 15/06/2007, à 15:42)
Hors ligne