[résolu]problème wifi avec intel PRO/Wireless 3945ABG

djingu · Le 09/06/2007, à 14:22

Déjà, bonjour tout le monde
Je poste ce message en ésperant de l'aide pour faire fonctionner le wifi de mon ordinateur portable (acer aspire 5601), je possède une Intel PRO/Wireless 3945ABG qui est normalement reconnue sur ma kubuntu feisty (d'ailleur le wifi marchait en livecd), j'ai lu les différents tuto & post de ce site mais en grand newbie éternel je dois avouer que je ne comprends pas grand chose Donc si vous pouviez m'aider, j'en serais très heureux ^^
Merci d'avance !

[EDIT] Le problème a été résolu, merci à tous

Dernière modification par djingu (Le 12/06/2007, à 21:48)

djingu · Le 09/06/2007, à 14:53

Alors, voici ce que me donnent les différentes commandes :
cat /etc/lsb-release

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=7.04
DISTRIB_CODENAME=feisty
DISTRIB_DESCRIPTION="Ubuntu 7.04"

lsusb

Bus 005 Device 003: ID 046d:0892 Logitech, Inc.
Bus 005 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 007: ID 046d:c508 Logitech, Inc.
Bus 001 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000

lspci

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc M52 [ATI Mobility Radeon X1300]
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0a:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
0a:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
0a:09.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller

sudo lshw -C network

  *-network
       description: Network controller
       product: PRO/Wireless 3945ABG Network Connection
       vendor: Intel Corporation
       physical id: 0
       bus info: pci@02:00.0
       version: 02
       width: 32 bits
       clock: 33MHz
       capabilities: bus_master cap_list
       configuration: driver=ipw3945 latency=0
       resources: iomemory:54000000-54000fff irq:16
  *-network
       description: Ethernet interface
       product: RTL-8139/8139C/8139C+
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0a:00.0
       logical name: eth0
       version: 10
       serial: 00:16:36:57:d6:35
       size: 100MB/s
       capacity: 100MB/s
       width: 32 bits
       clock: 33MHz
       capabilities: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full ip=192.168.0.101 latency=32 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=100MB/s
       resources: ioport:3000-30ff iomemory:c8300000-c83000ff irq:17

iwconfig

lo        no wireless extensions.

eth0      no wireless extensions.

ifconfig

eth0      Lien encap:Ethernet  HWaddr 00:16:36:57:D6:35
          inet adr:192.168.0.101  Bcast:192.168.0.255  Masque:255.255.255.0
          adr inet6: fe80::216:36ff:fe57:d635/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:4219439 erreurs:0 :0 overruns:0 frame:0
          TX packets:3204395 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          Octets reçus:3385300461 (3.1 GiB) Octets transmis:998694997 (952.4 MiB)
          Interruption:17 Adresse de base:0x6000

lo        Lien encap:Boucle locale
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          Packets reçus:468 erreurs:0 :0 overruns:0 frame:0
          TX packets:468 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          Octets reçus:25949 (25.3 KiB) Octets transmis:25949 (25.3 KiB)

iwlist scan

lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

cat /etc/network/interfaces

auto lo
iface lo inet loopback

Voila, merci d'avoir répondu aussi vite

Dernière modification par djingu (Le 09/06/2007, à 14:56)

djingu · Le 09/06/2007, à 15:44

En fait, j'avais trouvé ce lien : http://linux-wless.passys.nl/query_alles.php dans la doc, ou ils disent qu'il y a un driver libre sur sourceforge : http://ipw3945.sourceforge.net/
Je l'ai téléchargé mais je ne sais pas comment l'installer
Je vais voir pour les drivers windows
Merci

yostral · Le 09/06/2007, à 15:47

Étrange. J'ai exactement la même carte et elle fonctionne nickel.
Elle fonctionne avec le livecd et une fois installée. Regarde dans le gestionnaire de pilotes propriétaires, elle devrait y être, car avec le driver utilisé il faut un blob (firmware proprio).

djingu · Le 09/06/2007, à 15:54

Avec KDE c'est ou le "gestionnaire de pilotes propriétaires" ? Et tu es sur qu'il faut un proprio, car je viens de retrouver un driver libre sur TLD qui vient du site d'intel...sauf que je ne sais pas comment l'installer ^^
Merci des réponses

yostral · Le 09/06/2007, à 16:35

Oui je suis sûr.

L'ipw3945 est effectivement un driver libre. Mais pour fonctionner il lui faut un microcode prioritaire (regarde dans les "requirements" de la page que tu as donnée, et vas voir la licence sur le site où tu dois charger ce microcode binaire).

Ce microcode proprio est inclu dans le cd d'Ubuntu, et c'est d'ailleurs à cause de choses comme ça que certains se plaignent qu'Ubuntu n'est pas Libre, d'où l'apparition de GnewSense .

Tu as un driver vraiment Libre : iwl3945. Il me semble qu'il est maintenant fonctionnel (dans feisty je ne suis pas sûr).

Donc trouve déjà ton gestionnaire de pilotes proprios (je ne connais pas bien KDE) et vois le statut de ta carte.

Sinon en console tape :

lsmod | grep ipw3945

Voir si ce driver est chargé. Sinon, charge-le :

sudo modprobe ipw3945

Si ça ne donne rien, enlève-le :

sudo rmmod ipw3945

Et essaie avec le driver iwl3945 :

sudo modprobe iwl345

djingu · Le 09/06/2007, à 16:58

Alors, déjà merci Belga c'est vrai que je n'avais tout le (moi et l'anglais:mad: ), mais en fait...quand je tape

lsmod | grep ipw3945

il semblerait que le driver (ainsi que le firmware) soient la puisqu'il y a :

ipw3945               118816  1
ieee80211              34760  1 ipw3945

Donc il s'en sert non ?

EDIT : l'installation bloque à partir de

DIR=$(sed -ne "s:^FIRMWARE_DIR=\([^, ]*\).*:\1:p" \
        /etc/hotplug/firmware.agent)

cela me marque

DIR=$(sed -ne "s:^FIRMWARE_DIR=\([^, ]*\).*:\1:p" \
/etc/hotplug/firmware.agent)
sed: impossible de lire /etc/hotplug/firmware.agent: Aucun fichier ou répertoire de ce type

Dernière modification par djingu (Le 09/06/2007, à 17:16)

yostral · Le 09/06/2007, à 17:18

Il a bien chargé le driver. Le microcode, là on ne sais pas.
Vas voir dans /lib/firmware/ton_noyau s'il y a le fichier ipw3945.ucode.

Sinon, as-tu un moyen de désactiver/activer ton wifi ? Si oui, désactive le, réactive le et tape en console dmesg, voir ce qu'il en dit. Tu peux aussi aller rechercher dans les fichiers journaux ce qu'il dit là-dessus lors du démarrage.

Et essaye aussi avec iwl3945...

As-tu bien les restricted modules d'installés ?

Dernière modification par yostral (Le 09/06/2007, à 17:22)

djingu · Le 09/06/2007, à 17:31

Alors, le fichier ipw3945.ucode. est bien présent, ensuite...ben le wifi n'est même pas activé, il ne me propose que l'ethernet
Et voila ce qu'il me dit avec dmesg

[    0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1
.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Wed May 23 01:46:23 UTC 2007 (Ubuntu 2.6.20-1
6.28-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 en
d: 000000000009f800 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 en
d: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000008000 en
d: 00000000000e4000 type: 2
[    0.000000] copy_e820_map() start: 00000000000e8000 size: 0000000000018000 en
d: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fd90000 en
d: 000000003fe90000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000003fe90000 size: 000000000000b000 en
d: 000000003fe9b000 type: 3
[    0.000000] copy_e820_map() start: 000000003fe9b000 size: 0000000000065000 en
d: 000000003ff00000 type: 4
[    0.000000] copy_e820_map() start: 000000003ff00000 size: 0000000000100000 en
d: 0000000040000000 type: 2
[    0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 en
d: 00000000f0000000 type: 2
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 en
d: 00000000fec10000 type: 2
[    0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400 en
d: 00000000fed00400 type: 2
[    0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 en
d: 00000000fed1a000 type: 2
[    0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 en
d: 00000000fed90000 type: 2
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 en
d: 00000000fee01000 type: 2
[    0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 en
d: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fe90000 (usable)
[    0.000000]  BIOS-e820: 000000003fe90000 - 000000003fe9b000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003fe9b000 - 000000003ff00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] 126MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f7940
[    0.000000] Entering add_active_range(0, 0, 261776) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   261776
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   261776
[    0.000000] On node 0 totalpages: 261776
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 253 pages used for memmap
[    0.000000]   HighMem zone: 32147 pages, LIFO batch:7
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f
7870
[    0.000000] ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x
3fe934ed
[    0.000000] ACPI: FADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x
3fe9ae20
[    0.000000] ACPI: MADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x
3fe9ae94
[    0.000000] ACPI: HPET (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x
3fe9aefc
[    0.000000] ACPI: MCFG (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x
3fe9af34
[    0.000000] ACPI: MADT (v001 PTLTD    APIC   0x06040000  LTP 0x00000000) @ 0x
3fe9af70
[    0.000000] ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x
3fe9afd8
[    0.000000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 0x
3fe9352d
[    0.000000] ACPI: DSDT (v001 INTEL  CALISTGA 0x06040000 MSFT 0x02000002) @ 0x
00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: 2 duplicate APIC table ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:14 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:14 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a000
0000)
[    0.000000] Detected 1733.438 MHz processor.
[   12.372715] Built 1 zonelists.  Total pages: 259731
[   12.372719] Kernel command line: root=UUID=8e6e4fd5-94bd-4c2c-80a6-e9bec56242
f2 ro quiet splash locale=fr_FR
[   12.372883] mapped APIC to ffffd000 (fee00000)
[   12.372885] mapped IOAPIC to ffffc000 (fec00000)
[   12.372888] Enabling fast FPU save and restore... done.
[   12.372891] Enabling unmasked SIMD FPU exception support... done.
[   12.372898] Initializing CPU#0
[   12.372965] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   12.374664] Console: colour VGA+ 80x25
[   12.374964] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   12.375339] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   12.404741] Memory: 1026908k/1047104k available (1992k kernel code, 19484k re
served, 896k data, 328k init, 129600k highmem)
[   12.404750] virtual kernel memory layout:
[   12.404751]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   12.404752]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   12.404754]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   12.404755]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   12.404756]       .init : 0xc03d9000 - 0xc042b000   ( 328 kB)
[   12.404757]       .data : 0xc02f2354 - 0xc03d26d4   ( 896 kB)
[   12.404759]       .text : 0xc0100000 - 0xc02f2354   (1992 kB)
[   12.404762] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[   12.404912] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   12.404918] hpet0: 3 64-bit timers, 14318180 Hz
[   12.405923] Using HPET for base-timer
[   12.484815] Calibrating delay using timer specific routine.. 3470.72 BogoMIPS
 (lpj=6941459)
[   12.484853] Security Framework v1.0.0 initialized
[   12.484860] SELinux:  Disabled at boot.
[   12.484875] Mount-cache hash table entries: 512
[   12.484996] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 000
00000 0000c189 00000000 00000000
[   12.485005] monitor/mwait feature present.
[   12.485007] using mwait in idle threads.
[   12.485011] CPU: L1 I cache: 32K, L1 D cache: 32K
[   12.485013] CPU: L2 cache: 2048K
[   12.485016] CPU: Physical Processor ID: 0
[   12.485018] CPU: Processor Core ID: 0
[   12.485020] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0
000c189 00000000 00000000
[   12.485028] Compat vDSO mapped to ffffe000.
[   12.485032] Remapping vsyscall page to ffffe000
[   12.485043] Checking 'hlt' instruction... OK.
[   12.500891] SMP alternatives: switching to UP code
[   12.501229] Early unpacking initramfs... done
[   12.826540] ACPI: Core revision 20060707
[   12.852317] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found,
using machine DSDT.
[   12.856517] CPU0: Intel Genuine Intel(R) CPU           T2250  @ 1.73GHz stepp
ing 08
[   12.856537] SMP alternatives: switching to SMP code
[   12.856662] Booting processor 1/1 eip 3000
[   12.867076] Initializing CPU#1
[   12.944232] Calibrating delay using timer specific routine.. 3466.93 BogoMIPS
 (lpj=6933865)
[   12.944239] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 000
00000 0000c189 00000000 00000000
[   12.944244] monitor/mwait feature present.
[   12.944248] CPU: L1 I cache: 32K, L1 D cache: 32K
[   12.944250] CPU: L2 cache: 2048K
[   12.944252] CPU: Physical Processor ID: 0
[   12.944253] CPU: Processor Core ID: 1
[   12.944255] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0
000c189 00000000 00000000
[   12.944767] CPU1: Intel Genuine Intel(R) CPU           T2250  @ 1.73GHz stepp
ing 08
[   12.944790] Total of 2 processors activated (6937.66 BogoMIPS).
[   12.944989] ENABLING IO-APIC IRQs
[   12.945190] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   13.092048] checking TSC synchronization across 2 CPUs: passed.
[    0.003995] Brought up 2 CPUs
[    0.232293] migration_cost=68
[    0.232569] Booting paravirtualized kernel on bare hardware
[    0.232660] Time: 15:30:21  Date: 05/08/107
[    0.232689] NET: Registered protocol family 16
[    0.232772] EISA bus registered
[    0.232776] ACPI: bus type pci registered
[    0.257897] PCI: PCI BIOS revision 2.10 entry at 0xfd6f2, last bus=11
[    0.257899] PCI: Using configuration type 1
[    0.257901] Setting up standard PCI resources
[    0.262753] ACPI: Interpreter enabled
[    0.262756] ACPI: Using IOAPIC for interrupt routing
[    0.263069] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.263074] PCI: Probing PCI hardware (bus 00)
[    0.264439] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.264444] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[    0.264676] Boot video device is 0000:01:00.0
[    0.265713] PCI: Transparent bridge - 0000:00:1e.0
[    0.265785] PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0b
) (try 'pci=assign-busses')
[    0.265788] Please report the result to linux-kernel to fix this permanently
[    0.265879] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.270245] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.270592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.270847] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.271059] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.271313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.271934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.272499] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *1
1
[    0.272744] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.272986] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.273233] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *1
0
[    0.273477] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.273718] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0
, disabled.
[    0.273960] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.274203] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.294663] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.294672] pnp: PnP ACPI init
[    0.296362] pnp: PnP ACPI: found 9 devices
[    0.296366] PnPBIOS: Disabled by ACPI PNP
[    0.296407] PCI: Using ACPI for IRQ routing
[    0.296409] PCI: If a device doesn't work, try "pci=routeirq".  If it helps,
post a report
[    0.296414] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[    0.296417] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[    0.296419] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
[    0.296422] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
[    0.296424] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
[    0.296426] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
[    0.296428] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
[    0.296431] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
[    0.296433] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
[    0.296435] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.3
[    0.296438] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.3
[    0.296440] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.3
[    0.328189] NET: Registered protocol family 8
[    0.328191] NET: Registered protocol family 20
[    0.328753] PCI: Bridge: 0000:00:01.0
[    0.328755]   IO window: 2000-2fff
[    0.328760]   MEM window: c8100000-c81fffff
[    0.328763]   PREFETCH window: d0000000-d7ffffff
[    0.328778] PCI: Bridge: 0000:00:1c.0
[    0.328780]   IO window: disabled.
[    0.328786]   MEM window: 54000000-540fffff
[    0.328790]   PREFETCH window: disabled.
[    0.328796] PCI: Bridge: 0000:00:1c.1
[    0.328798]   IO window: disabled.
[    0.328803]   MEM window: disabled.
[    0.328808]   PREFETCH window: disabled.
[    0.328813] PCI: Bridge: 0000:00:1c.2
[    0.328815]   IO window: disabled.
[    0.328820]   MEM window: disabled.
[    0.328825]   PREFETCH window: disabled.
[    0.328831] PCI: Bridge: 0000:00:1c.3
[    0.328832]   IO window: disabled.
[    0.328837]   MEM window: disabled.
[    0.328842]   PREFETCH window: disabled.
[    0.328852] PCI: Bus 11, cardbus bridge: 0000:0a:09.0
[    0.328855]   IO window: 00003400-000034ff
[    0.328860]   IO window: 00003800-000038ff
[    0.328866]   PREFETCH window: 50000000-53ffffff
[    0.328871]   MEM window: 58000000-5bffffff
[    0.328877] PCI: Bridge: 0000:00:1e.0
[    0.328880]   IO window: 3000-3fff
[    0.328886]   MEM window: c8300000-c83fffff
[    0.328891]   PREFETCH window: 50000000-53ffffff
[    0.328908] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ
 16
[    0.328914] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.328936] PCI: Enabling device 0000:00:1c.0 (0000 -> 0002)
[    0.328941] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ
 17
[    0.328949] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.328972] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 16 (level, low) -> IRQ
 16
[    0.328980] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.329004] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ
 18
[    0.329011] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    0.329036] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ
 19
[    0.329043] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    0.329057] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.329076] ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 20 (level, low) -> IRQ
 20
[    0.329106] NET: Registered protocol family 2
[    0.383549] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.383655] TCP established hash table entries: 131072 (order: 8, 1048576 byt
es)
[    0.384355] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.384714] TCP: Hash tables configured (established 131072 bind 65536)
[    0.384717] TCP reno registered
[    0.399608] checking if image is initramfs... it is
[    1.035252] Freeing initrd memory: 6760k freed
[    1.035429] Simple Boot Flag at 0x3e set to 0x1
[    1.035881] audit: initializing netlink socket (disabled)
[    1.035898] audit(1181316621.808:1): initialized
[    1.035994] highmem bounce pool size: 64 pages
[    1.036082] VFS: Disk quotas dquot_6.5.1
[    1.036102] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.036151] io scheduler noop registered
[    1.036154] io scheduler anticipatory registered
[    1.036156] io scheduler deadline registered
[    1.036167] io scheduler cfq registered (default)
[    1.036415] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    1.036452] assign_interrupt_mode Found MSI capability
[    1.036455] Allocate Port Service[0000:00:01.0:pcie00]
[    1.036543] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    1.036601] assign_interrupt_mode Found MSI capability
[    1.036604] Allocate Port Service[0000:00:1c.0:pcie00]
[    1.036641] Allocate Port Service[0000:00:1c.0:pcie02]
[    1.036762] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    1.036821] assign_interrupt_mode Found MSI capability
[    1.036823] Allocate Port Service[0000:00:1c.1:pcie00]
[    1.036854] Allocate Port Service[0000:00:1c.1:pcie02]
[    1.036974] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    1.037033] assign_interrupt_mode Found MSI capability
[    1.037035] Allocate Port Service[0000:00:1c.2:pcie00]
[    1.037066] Allocate Port Service[0000:00:1c.2:pcie02]
[    1.037187] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    1.037245] assign_interrupt_mode Found MSI capability
[    1.037247] Allocate Port Service[0000:00:1c.3:pcie00]
[    1.037282] Allocate Port Service[0000:00:1c.3:pcie02]
[    1.037456] isapnp: Scanning for PnP cards...
[    1.391109] isapnp: No Plug & Play device found
[    1.413385] Real Time Clock Driver v1.12ac
[    1.413439] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[    1.414040] mice: PS/2 mouse device common for all mice
[    1.414592] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 bloc
ksize
[    1.414814] input: Macintosh mouse button emulation as /class/input/input0
[    1.414847] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    1.414851] ide: Assuming 33MHz system bus speed for PIO modes; override with
 idebus=xx
[    1.415089] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq
 1,12
[    1.417376] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.419860] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.419864] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.419867] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.419869] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.419872] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.419980] EISA: Probing bus 0 at eisa.0
[    1.419989] Cannot allocate resource for EISA slot 1
[    1.419993] Cannot allocate resource for EISA slot 2
[    1.419995] Cannot allocate resource for EISA slot 3
[    1.420018] EISA: Detected 0 cards.
[    1.450195] TCP cubic registered
[    1.450205] NET: Registered protocol family 1
[    1.450228] Starting balanced_irq
[    1.450235] Using IPI No-Shortcut mode
[    1.450342] ACPI: (supports S0 S3 S4 S5)
[    1.450389]   Magic number: 11:667:537
[    1.450680] Freeing unused kernel memory: 328k freed
[    1.454158] Time: tsc clocksource has been installed.
[    1.467086] input: AT Translated Set 2 keyboard as /class/input/input1
[    2.650518] Capability LSM initialized
[    2.686709] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTable
Id [ Cpu0Ist] [20060707]
[    2.686924] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTable
Id [ Cpu0Cst] [20060707]
[    2.687153] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    2.687157] ACPI: Processor [CPU0] (supports 8 throttling states)
[    2.687642] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTable
Id [ Cpu1Ist] [20060707]
[    2.687841] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTable
Id [ Cpu1Cst] [20060707]
[    2.688119] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    2.688126] ACPI: Processor [CPU1] (supports 8 throttling states)
[    2.691716] ACPI: Thermal Zone [THRM] (33 C)
[    3.288000] Time: hpet clocksource has been installed.
[    3.600000] usbcore: registered new interface driver usbfs
[    3.600000] usbcore: registered new interface driver hub
[    3.600000] usbcore: registered new device driver usb
[    3.600000] USB Universal Host Controller Interface driver v3.0
[    3.600000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ
 21
[    3.600000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    3.600000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.600000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus numbe
r 1
[    3.600000] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001800
[    3.600000] usb usb1: configuration #1 chosen from 1 choice
[    3.600000] hub 1-0:1.0: USB hub found
[    3.600000] hub 1-0:1.0: 2 ports detected
[    3.704000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ
 19
[    3.704000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.704000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.704000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus numbe
r 2
[    3.704000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[    3.704000] usb usb2: configuration #1 chosen from 1 choice
[    3.704000] hub 2-0:1.0: USB hub found
[    3.704000] hub 2-0:1.0: 2 ports detected
[    3.712000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    3.808000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ
 18
[    3.808000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    3.808000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.808000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus numbe
r 3
[    3.808000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[    3.808000] usb usb3: configuration #1 chosen from 1 choice
[    3.808000] hub 3-0:1.0: USB hub found
[    3.808000] hub 3-0:1.0: 2 ports detected
[    3.912000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ
 16
[    3.912000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    3.912000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.912000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus numbe
r 4
[    3.912000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[    3.912000] usb usb4: configuration #1 chosen from 1 choice
[    3.912000] hub 4-0:1.0: USB hub found
[    3.912000] hub 4-0:1.0: 2 ports detected
[    3.944000] usb 1-2: new low speed USB device using uhci_hcd and address 2
[    4.016000] 8139cp 0000:0a:00.0: This (id 10ec:8139 rev 10) is not an 8139C+
compatible chip
[    4.016000] 8139cp 0000:0a:00.0: Try the "8139too" driver instead.
[    4.016000] ICH7: IDE controller at PCI slot 0000:00:1f.1
[    4.016000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ
 18
[    4.016000] ICH7: chipset revision 2
[    4.016000] ICH7: not 100% native mode: will probe irqs later
[    4.016000]     ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:DM
A
[    4.016000]     ide1: BM-DMA at 0x1888-0x188f, BIOS settings: hdc:pio, hdd:pi
o
[    4.016000] Probing IDE interface ide0...
[    4.024000] 8139too Fast Ethernet driver 0.9.28
[    4.116000] usb 1-2: configuration #1 chosen from 1 choice
[    4.304000] hda: TOSHIBA MK8032GAX, ATA DISK drive
[    4.360000] usb 3-2: new full speed USB device using uhci_hcd and address 2
[    4.556000] usb 3-2: configuration #1 chosen from 1 choice
[    4.560000] usbcore: registered new interface driver hiddev
[    4.576000] input: Logitech USB Receiver as /class/input/input2
[    4.576000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00
:1d.0-2
[    4.576000] usbcore: registered new interface driver usbhid
[    4.576000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[    5.088000] hdb: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive
[    5.144000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    5.168000] Probing IDE interface ide1...
[    5.740000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ
 21
[    5.740000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    5.740000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    5.740000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus numbe
r 5
[    5.740000] ehci_hcd 0000:00:1d.7: debug port 1
[    5.740000] PCI: cache line size of 32 is not supported by device 0000:00:1d.
7
[    5.740000] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xc8004000
[    5.744000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[    5.744000] usb usb5: configuration #1 chosen from 1 choice
[    5.744000] hub 5-0:1.0: USB hub found
[    5.744000] hub 5-0:1.0: 8 ports detected
[    5.848000] ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 17 (level, low) -> IRQ
 17
[    5.848000] eth0: RealTek RTL8139 at 0xf8856000, 00:16:36:57:d6:35, IRQ 17
[    5.848000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[    5.852000] SCSI subsystem initialized
[    5.860000] libata version 2.20 loaded.
[    5.872000] hdb: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDM
A(33)
[    5.872000] Uniform CD-ROM driver Revision: 3.20
[    5.876000] hda: max request size: 512KiB
[    5.876000] hda: 156301488 sectors (80026 MB), CHS=16383/255/63, UDMA(33)
[    5.884000] hda: cache flushes supported
[    5.884000]  hda: hda1 hda2 < hda5 >
[    6.152000] Attempting manual resume
[    6.152000] swsusp: Resume From Partition 3:5
[    6.152000] PM: Checking swsusp image.
[    6.152000] PM: Resume from disk failed.
[    6.196000] kjournald starting.  Commit interval 5 seconds
[    6.196000] EXT3-fs: mounted filesystem with ordered data mode.
[    6.272000] usb 5-6: new high speed USB device using ehci_hcd and address 3
[    6.444000] usb 5-6: configuration #1 chosen from 1 choice
[    6.444000] usb 3-2: USB disconnect, address 2
[    6.572000] usb 1-2: USB disconnect, address 2
[    6.812000] usb 1-2: new low speed USB device using uhci_hcd and address 3
[    6.984000] usb 1-2: configuration #1 chosen from 1 choice
[    7.004000] input: Logitech USB Receiver as /class/input/input3
[    7.004000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00
:1d.0-2
[   19.260000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   19.280000] Linux agpgart interface v0.102 (c) Dave Jones
[   19.328000] agpgart: Detected an Intel 945GM Chipset.
[   19.348000] agpgart: AGP aperture is 256M @ 0x0
[   19.352000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   19.476000] intel_rng: FWH not detected
[   19.556000] iTCO_vendor_support: vendor-support=0
[   19.560000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[   19.860000] Linux video capture interface: v2.00
[   19.872000] ieee80211_crypt: registered algorithm 'NULL'
[   19.892000] ACPI: PCI Interrupt 0000:0a:09.2[A] -> GSI 20 (level, low) -> IRQ
 20
[   19.912000] Yenta: CardBus bridge found at 0000:0a:09.0 [1025:0102]
[   19.912000] Yenta: Using CSCINT to route CSC interrupts to PCI
[   19.912000] Yenta: Routing CardBus interrupts to PCI
[   19.912000] Yenta TI: socket 0000:0a:09.0, mfunc 0x01321b22, devctl 0x66
[   19.940000] sdhci: Secure Digital Host Controller Interface driver
[   19.940000] sdhci: Copyright(c) Pierre Ossman
[   19.944000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   19.944000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@li
nux.intel.com>
[   20.048000] ubuntu/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(VC03
21)
[   20.056000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa047
13/0x204000
[   20.076000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for
 Linux, 1.2.0mp
[   20.076000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   20.104000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[   20.104000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   20.104000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   20.144000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
[   20.144000] Socket status: 30000006
[   20.144000] Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #
0e
[   20.144000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[   20.144000] cs: IO port probe 0x3000-0x3fff: clean.
[   20.144000] pcmcia: parent PCI bridge Memory window: 0xc8300000 - 0xc83fffff
[   20.144000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[   20.148000] sdhci: SDHCI controller found at 0000:0a:09.3 [104c:803c] (rev 0)
[   20.148000] ACPI: PCI Interrupt 0000:0a:09.3[A] -> GSI 20 (level, low) -> IRQ
 20
[   20.148000] mmc0: SDHCI at 0xc8300400 irq 20 DMA
[   20.152000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
[   20.152000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ
 16
[   20.152000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   20.152000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   20.280000] usbcore: registered new interface driver gspca
[   20.280000] ubuntu/media/gspcav1/gspca_core.c: gspca driver 01.00.12 register
ed
[   20.440000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ
 22
[   20.440000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   20.564000] cs: IO port probe 0x100-0x3af: clean.
[   20.564000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   20.568000] cs: IO port probe 0x820-0x8ff: clean.
[   20.568000] cs: IO port probe 0xc00-0xcf7: clean.
[   20.568000] cs: IO port probe 0xa00-0xaff: clean.
[   21.080000] fuse init (API version 7.8)
[   21.116000] lp: driver loaded but no devices found
[   21.164000] Adding 3028212k swap on /dev/disk/by-uuid/b4a67cc3-3e3e-43b5-9696
-5ca1ff6ed668.  Priority:-1 extents:1 across:3028212k
[   21.336000] EXT3 FS on hda1, internal journal
[   22.040000] ipw3945: Radio Frequency Kill Switch is On:
[   22.040000] Kill switch must be turned off for wireless networking to work.
[   22.264000] ACPI: Battery Slot [BAT1] (battery present)
[   22.276000] input: Power Button (FF) as /class/input/input5
[   22.276000] ACPI: Power Button (FF) [PWRF]
[   22.276000] input: Lid Switch as /class/input/input6
[   22.276000] ACPI: Lid Switch [LID]
[   22.284000] input: Power Button (CM) as /class/input/input7
[   22.284000] ACPI: Power Button (CM) [PWRB]
[   22.288000] input: Sleep Button (CM) as /class/input/input8
[   22.288000] ACPI: Sleep Button (CM) [SLPB]
[   22.412000] Using specific hotkey driver
[   22.480000] ibm_acpi: ec object not found
[   22.580000] ACPI: AC Adapter [ACAD] (on-line)
[   22.588000] No dock devices found.
[   22.624000] pcc_acpi: loading...
[   22.636000] wmi_add device=c1958800
[   22.636000] calling WQBA
[   26.048000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   26.956000] ppdev: user-space parallel port driver
[   27.904000] apm: BIOS not found.
[   28.908000] NET: Registered protocol family 17
[   29.500000] Bluetooth: Core ver 2.11
[   29.500000] NET: Registered protocol family 31
[   29.500000] Bluetooth: HCI device and connection manager initialized
[   29.500000] Bluetooth: HCI socket layer initialized
[   29.540000] Bluetooth: L2CAP ver 2.8
[   29.540000] Bluetooth: L2CAP socket layer initialized
[   29.604000] Bluetooth: RFCOMM socket layer initialized
[   29.604000] Bluetooth: RFCOMM TTY layer initialized
[   29.604000] Bluetooth: RFCOMM ver 1.8
[   30.768000] NET: Registered protocol family 10
[   30.768000] lo: Disabled Privacy Extensions
[   34.240000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies,
Starnberg, GERMANY' taints kernel.
[   34.248000] [fglrx] Maximum main memory to use for locked dma buffers: 928 MB
ytes.
[   34.248000] [fglrx] module loaded - fglrx 8.36.5 [Apr 17 2007] on minor 0
[   34.284000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ
 16
[   36.420000] [fglrx] total      GART = 130023424
[   36.420000] [fglrx] free       GART = 114032640
[   36.420000] [fglrx] max single GART = 114032640
[   36.420000] [fglrx] total      LFB  = 134086656
[   36.420000] [fglrx] free       LFB  = 119697408
[   36.420000] [fglrx] max single LFB  = 119697408
[   36.420000] [fglrx] total      Inv  = 0
[   36.420000] [fglrx] free       Inv  = 0
[   36.420000] [fglrx] max single Inv  = 0
[   36.420000] [fglrx] total      TIM  = 0
[   40.776000] eth0: no IPv6 routers present
[  234.568000] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
[  234.568000] hdb: command error: error=0x51 { IllegalLengthIndication LastFail
edSense=0x05 }
[  234.568000] ide: failed opcode was: unknown
[  234.568000] hdb: error code: 0x70  sense_key: 0x05  asc: 0x64  ascq: 0x00
[  234.568000] end_request: I/O error, dev hdb, sector 0
[  234.568000] Buffer I/O error on device hdb, logical block 0
[  234.568000] Buffer I/O error on device hdb, logical block 1
[  234.568000] Buffer I/O error on device hdb, logical block 2
[  234.568000] Buffer I/O error on device hdb, logical block 3
[  234.568000] Buffer I/O error on device hdb, logical block 4
[  234.568000] Buffer I/O error on device hdb, logical block 5
[  234.568000] Buffer I/O error on device hdb, logical block 6
[  234.568000] Buffer I/O error on device hdb, logical block 7
[  234.568000] Buffer I/O error on device hdb, logical block 8
[  234.568000] Buffer I/O error on device hdb, logical block 9
[  234.572000] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
[  234.572000] hdb: command error: error=0x51 { IllegalLengthIndication LastFail
edSense=0x05 }
[  234.572000] ide: failed opcode was: unknown
[  234.572000] hdb: error code: 0x70  sense_key: 0x05  asc: 0x64  ascq: 0x00
[  234.572000] end_request: I/O error, dev hdb, sector 0
[ 3005.832000] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
[ 3005.832000] hdb: command error: error=0x51 { IllegalLengthIndication LastFail
edSense=0x05 }
[ 3005.832000] ide: failed opcode was: unknown
[ 3005.832000] hdb: error code: 0x70  sense_key: 0x05  asc: 0x64  ascq: 0x00
[ 3005.832000] end_request: I/O error, dev hdb, sector 0
[ 3005.832000] printk: 26 messages suppressed.
[ 3005.832000] Buffer I/O error on device hdb, logical block 0
[ 3005.836000] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
[ 3005.836000] hdb: command error: error=0x51 { IllegalLengthIndication LastFail
edSense=0x05 }
[ 3005.836000] ide: failed opcode was: unknown
[ 3005.836000] hdb: error code: 0x70  sense_key: 0x05  asc: 0x64  ascq: 0x00
[ 3005.836000] end_request: I/O error, dev hdb, sector 4
[ 3005.836000] Buffer I/O error on device hdb, logical block 1
[ 3005.836000] Buffer I/O error on device hdb, logical block 2
[ 3005.836000] Buffer I/O error on device hdb, logical block 3
[ 3005.836000] Buffer I/O error on device hdb, logical block 4
[ 3005.836000] Buffer I/O error on device hdb, logical block 5
[ 3005.836000] Buffer I/O error on device hdb, logical block 6
[ 3005.836000] Buffer I/O error on device hdb, logical block 7
[ 3005.836000] Buffer I/O error on device hdb, logical block 8
[ 3005.836000] Buffer I/O error on device hdb, logical block 9
[ 3005.840000] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
[ 3005.840000] hdb: command error: error=0x51 { IllegalLengthIndication LastFail
edSense=0x05 }
[ 3005.840000] ide: failed opcode was: unknown
[ 3005.840000] hdb: error code: 0x70  sense_key: 0x05  asc: 0x64  ascq: 0x00
[ 3005.840000] end_request: I/O error, dev hdb, sector 0
[ 3005.840000] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
[ 3005.840000] hdb: command error: error=0x51 { IllegalLengthIndication LastFail
edSense=0x05 }
[ 3005.840000] ide: failed opcode was: unknown
[ 3005.844000] hdb: error code: 0x70  sense_key: 0x05  asc: 0x64  ascq: 0x00
[ 3005.844000] end_request: I/O error, dev hdb, sector 4
[ 6101.348000] usb 1-2: USB disconnect, address 3
[ 6475.948000] usb 1-2: new low speed USB device using uhci_hcd and address 4
[ 6476.120000] usb 1-2: configuration #1 chosen from 1 choice
[ 6476.140000] input: Logitech USB Receiver as /class/input/input9
[ 6476.140000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00
:1d.0-2
[10475.960000] usb 1-2: USB disconnect, address 4
[10485.296000] usb 5-2: new high speed USB device using ehci_hcd and address 5
[10485.428000] usb 5-2: configuration #1 chosen from 1 choice
[10485.660000] usbcore: registered new interface driver libusual
[10485.716000] Initializing USB Mass Storage driver...
[10485.716000] scsi0 : SCSI emulation for USB Mass Storage devices
[10485.716000] usbcore: registered new interface driver usb-storage
[10485.716000] USB Mass Storage support registered.
[10485.716000] usb-storage: device found at 5
[10485.716000] usb-storage: waiting for device to settle before scanning
[10490.716000] usb-storage: device scan complete
[10490.716000] scsi 0:0:0:0: Direct-Access     Intuix   U3               6.50 PQ
: 0 ANSI: 0 CCS
[10490.716000] scsi 0:0:0:1: CD-ROM            Intuix   U3               6.50 PQ
: 0 ANSI: 0
[10490.792000] SCSI device sda: 1962399 512-byte hdwr sectors (1005 MB)
[10490.792000] sda: Write Protect is off
[10490.792000] sda: Mode Sense: 45 00 00 08
[10490.792000] sda: assuming drive cache: write through
[10490.792000] SCSI device sda: 1962399 512-byte hdwr sectors (1005 MB)
[10490.792000] sda: Write Protect is off
[10490.792000] sda: Mode Sense: 45 00 00 08
[10490.792000] sda: assuming drive cache: write through
[10490.792000]  sda: sda1
[10490.796000] sd 0:0:0:0: Attached scsi removable disk sda
[10490.804000] sr0: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
[10490.804000] sr 0:0:0:1: Attached scsi CD-ROM sr0
[10490.804000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[10490.804000] sr 0:0:0:1: Attached scsi generic sg1 type 5
[10736.048000] usb 5-2: USB disconnect, address 5
[11114.008000] usb 1-2: new low speed USB device using uhci_hcd and address 5
[11114.180000] usb 1-2: configuration #1 chosen from 1 choice
[11114.200000] input: Logitech USB Receiver as /class/input/input10
[11114.200000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00
:1d.0-2
[14803.864000] atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0
060/serio0).
[14803.864000] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
[14804.096000] atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa
0060/serio0).
[14804.096000] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
[16239.772000] atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0
060/serio0).
[16239.772000] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
[16240.188000] atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa
0060/serio0).
[16240.188000] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
[16344.044000] atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0
060/serio0).
[16344.044000] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
[16344.324000] atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa

Et iwl3945, je ne l'ai pas, et je ne l'ai pas trouvé sur sourceforge
Ensuite, qu'est-ce que les restricted modules & les fichiers journaux ?

EDIT : l'installarion du driver de sourceforge n'a rien résolu

Dernière modification par djingu (Le 09/06/2007, à 17:39)

yostral · Le 09/06/2007, à 17:48

Tu n'as pas d'interrupteur sur ton ordi ou activer/désactiver le wifi ? un bouton ou une combinaison de touches ? Rien à voir avec l'OS.

Et dans le dmesg tu as :

[   22.040000] ipw3945: Radio Frequency Kill Switch is On:
[   22.040000] Kill switch must be turned off for wireless networking to work.

Normalement ça veut bien dire que tu as un interrupteur sur off... et pas sur on.

djingu · Le 09/06/2007, à 18:13

En effet il y avait bien un bouton (je suis un peu tarte -pour ne pas dire autre chose- pour avoir oublié ça xD)
Sauf que maintenant il n'arrive pas à me connecter, ça bloque à 28% et il n'arrive que très peu à trouver le raison (je suis même pas à 30 cm du routeur ! )
En tout cas merci d'avoir trouvé le bouton magique

djingu · Le 10/06/2007, à 10:11

Belga, je crois que tu me donnes le lien pour ipw3945 ^^
Je vais voir du côté de des drivers windows

Dernière modification par djingu (Le 10/06/2007, à 10:18)

djingu · Le 10/06/2007, à 21:00

La version ipw3945 est installée chez moi Yostral me conseillait d'aller voir iwl3945 ^^
Enfin, il faut que j'aille voir le tuto pour Ndiswrapper

yostral · Le 11/06/2007, à 14:44

Bon, ben là je ne sais pas quoi te dire de plus...
Si tu as bien les restricted modules d'installés, tu as le microcode. Le driver est bien chargé, donc ça devrait fonctionner... si ton interrupteur est sur on .

As-tu booté avec l'interrupteur sur on ? Car avec certains ordi, si on l'active après le boot, c'est pas/mal pris en compte.

Comme le dit belga, il y a peut-être d'autres solutions .

Bonne chance.

djingu · Le 11/06/2007, à 18:25

Apparemment les restricted modules sont là, mon interrupteur est sur on. Donc, je vais voir du côté des drivers windows (si j'arrive à extraire ce 2eme .exe ^^ )
Merci des réponses, djingu depuis son Ethernet qui marche très bien

djingu · Le 11/06/2007, à 21:08

Sauf qu'il n'y a pas windows sur cet ordinateur

azimuth024 · Le 12/06/2007, à 12:28

J'ai la même carte réseau et aucun problème sous Feisty (Edgy migré), mais il m'a fallu le microcode correct.
Je te poste le mien, il fonctionne chez moi (j'ai mis du temps à le trouver ):
http://rapidshare.com/files/36674016/ipw3945.ucode.html
Je me connecte avec le cryptage WPA mais ça a été un peu délicat à mettre en oeuvre (j'utilise wpa_supplicant).
Assure-toi que ton point d'accès Wifi n'est pas sécurisé (pas de cryptage, pas de filtrage MAC) avant de tester.

djingu · Le 12/06/2007, à 17:50

Belga : J'avais trouvé ça ^^ mais pour installer le driver contenu dans l'exe, et ça bloque
Azimuth024 : Merci, je l'ai copié dans /lib/firmware et mon réseau est protégé par une clé WEP hexadécimale
[edit] ça marche ! Merci à tous pour votre aide !

Dernière modification par djingu (Le 12/06/2007, à 21:47)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 09/06/2007, à 14:22

[résolu]problème wifi avec intel PRO/Wireless 3945ABG

#2 Le 09/06/2007, à 14:53

Re : [résolu]problème wifi avec intel PRO/Wireless 3945ABG

#3 Le 09/06/2007, à 15:44

Re : [résolu]problème wifi avec intel PRO/Wireless 3945ABG

#4 Le 09/06/2007, à 15:47

Re : [résolu]problème wifi avec intel PRO/Wireless 3945ABG

#5 Le 09/06/2007, à 15:54

Re : [résolu]problème wifi avec intel PRO/Wireless 3945ABG

#6 Le 09/06/2007, à 16:35

Re : [résolu]problème wifi avec intel PRO/Wireless 3945ABG

#7 Le 09/06/2007, à 16:58

Re : [résolu]problème wifi avec intel PRO/Wireless 3945ABG

#8 Le 09/06/2007, à 17:18

Re : [résolu]problème wifi avec intel PRO/Wireless 3945ABG

#9 Le 09/06/2007, à 17:31

Re : [résolu]problème wifi avec intel PRO/Wireless 3945ABG

#10 Le 09/06/2007, à 17:48

Re : [résolu]problème wifi avec intel PRO/Wireless 3945ABG

#11 Le 09/06/2007, à 18:13

Re : [résolu]problème wifi avec intel PRO/Wireless 3945ABG

#12 Le 10/06/2007, à 10:11

Re : [résolu]problème wifi avec intel PRO/Wireless 3945ABG

#13 Le 10/06/2007, à 21:00

Re : [résolu]problème wifi avec intel PRO/Wireless 3945ABG

#14 Le 11/06/2007, à 14:44

Re : [résolu]problème wifi avec intel PRO/Wireless 3945ABG

#15 Le 11/06/2007, à 18:25

Re : [résolu]problème wifi avec intel PRO/Wireless 3945ABG

#16 Le 11/06/2007, à 21:08

Re : [résolu]problème wifi avec intel PRO/Wireless 3945ABG

#17 Le 12/06/2007, à 12:28

Re : [résolu]problème wifi avec intel PRO/Wireless 3945ABG

#18 Le 12/06/2007, à 17:50

Re : [résolu]problème wifi avec intel PRO/Wireless 3945ABG

Pied de page des forums