Contenu | Rechercher | Menus

Annonce

Ubuntu-fr vend de superbes t-shirts et de belles clés USB 32Go
Rendez-vous sur la boutique En Vente Libre

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 29/05/2013, à 23:54

Gal3rienne

[Résolu] DDE impossible à monter

Bonjour à tous,
Désolée par avance pour ce (trop) long message.
J'ai récupéré hier un netbook sur Windows XP.
Ayant déjà un ordinateur sous Windows (Vista), j'ai décidé de passer ce netbook sous Linux.
J'ai choisi la version d'Ubuntu 12.04.
Je suis totalement novice sous ce système d'exploitation, mais comme il n'est jamais trop tard pour bien faire, j'ai décidé de me lancer. Installation par clé USB en suivant un tuto plutôt bien fait, tout va bien.
J'ai un disque dur externe, Toshiba, de 1,5T qui tourne très bien sous mon autre PC.
Néanmoins quand j'essaie de brancher ce DDE sur mon netbook, l'erreur suivante apparaît :

Impossible de monter Système de fichier 1,5TB
Error mounting: mount exited with exit code 12: Failed to read last sector (2930277104): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
   or it was not setup correctly (e.g. by not using mdadm --build ...),
   or a wrong device is tried to be mounted,
   or the partition table is corrupt (partition is smaller than NTFS),
   or the NTFS boot sector is corrupt (NTFS size is not valid).
Failed to mount '/dev/sdb1': Invalid argument
The device '/dev/sdb1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

Bon alors j'ai pas tout saisi, mis à part le fait qu'un secteur de mon disque doit avoir un soucis..
J'ai "retiré le périphérique en toute sécurité" sous Windows, rebranché le DD sur le netbook, éteint et rallumé la machine mais rien n'y fait.
Je n'ose pas mettre dans le terminal les lignes de commande dans que j'ai pu voir dans certaines autres discussions.
Et je ne peux formater mon DDE étant donné qu'il est plein au 2/3 et que je n'ai nul part ailleurs où stocker mes données.

Ce n'est pas tellement urgent, mais j'aimerais réussir à résoudre ce problème, et vous remercie donc par avance.

Gal3rienne.

Dernière modification par Gal3rienne (Le 30/05/2013, à 13:02)

Hors ligne

#2 Le 30/05/2013, à 09:03

navtex

Re : [Résolu] DDE impossible à monter

Bonjour
il faut, sous windows, lancer :

chkdsk X: /f

où X est la lettre désignant la partition sous windows.


xubuntu 20.04  dell précision 4500
Voyager 16.04   sur Dell vostro 1720  2.66GHz × 2  - Ram 4Gio
Xubuntu 18.04  sur  Panasonic CF-M34  PIII 0,93Ghz   500Mo
Cours camarade le vieux monde est derriere toi

Hors ligne

#3 Le 30/05/2013, à 09:44

Gal3rienne

Re : [Résolu] DDE impossible à monter

Bonjour,
Voici le résultat du scan :

C:\Windows\system32>chkdsk F: /f
Le type du système de fichiers est NTFS.

CHKDSK est en train de vérifier les fichiers (étape 1 de 3)...
  37376 enregistrements de fichier traités.
La vérification des fichiers est terminée.
  0 enregistrements de grand fichier traités.
  0 enregistrements de fichier incorrect traités.
  0 enregistrements EA traités.
  0 enregistrements d'analyse traités.
CHKDSK est en train de vérifier les index (étape 2 de 3)..
  40214 entrées d'index traitées.
La vérification des index est terminée.
  0 fichiers non indexés traités.
CHKDSK est en train de vérifier les descripteurs de sécurité (étape 3 de 3)
  37376 descripteurs de sécurité traités.
La vérification des descripteurs de sécurité est terminée.
  1420 fichiers de données traités.
CHKDSK vérifie le journal USN...
99 % effectués. (12398592 octets USN sur 22859096 traités)
99 % effectués. (16252928 octets USN sur 22859096 traités)
99 % effectués. (20119552 octets USN sur 22859096 traités)
100 % effectués. (22855680 octets USN sur 22859096 traités)
  22859096 octets USN traités.
Vérification du journal USN terminée.
Windows a vérifié le système de fichiers sans trouver de problème.

1465138552 Ko d'espace disque au total.
1077454536 Ko dans 35923 fichiers.
     15196 Ko dans 1421 index.
         0 Ko dans des secteurs défectueux.
    170584 Ko utilisés par le système.
     65536 Ko occupés par le fichier journal.
387498236 Ko disponibles sur le disque.

      4096 octets dans chaque unité d'allocation.
366284638 unités d'allocation au total sur le disque.
  96874559 unités d'allocation disponibles sur le disque.

Que dois-je faire désormais ? Merci,

Gal3rienne.

Dernière modification par Gal3rienne (Le 30/05/2013, à 09:47)

Hors ligne

#4 Le 30/05/2013, à 10:05

navtex

Re : [Résolu] DDE impossible à monter

Le systeme (ubuntu) ne saisit pas le probleme et moi non plus.
Les mises à jour sont-elles faites ? Un peu de rodage débloquera t il la situation ?
Je ne peux pas t'aider beaucoup plus .


xubuntu 20.04  dell précision 4500
Voyager 16.04   sur Dell vostro 1720  2.66GHz × 2  - Ram 4Gio
Xubuntu 18.04  sur  Panasonic CF-M34  PIII 0,93Ghz   500Mo
Cours camarade le vieux monde est derriere toi

Hors ligne

#5 Le 30/05/2013, à 10:11

michel_04

Re : [Résolu] DDE impossible à monter

Bonjour,

HDD USB connecté, que donne :

sudo fdisk -l

Edit :
Et :

lsusb

A+

Dernière modification par michel_04 (Le 30/05/2013, à 10:15)

Hors ligne

#6 Le 30/05/2013, à 10:47

Gal3rienne

Re : [Résolu] DDE impossible à monter

@Navtex, je ne sais pas ce que tu entends par rodage, et quelles mises à jour dois-je effectuer ?
En tout cas merci d'avoir pris la peine d'essayer de résoudre mon problème.

@Michel_04, voici ce que me renvoie le terminal suite aux commandes que tu m'as dit de faire :

marnecht@pc-de-marnecht:~$ sudo fdisk -l
[sudo] password for marnecht:

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 têtes, 63 secteurs/piste, 19457 cylindres, total 312581808 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x0003166c

Périphérique Amorce  Début        Fin      Blocs     Id  Système
/dev/sda1   *        2048   308406271   154202112   83  Linux
/dev/sda2       308408318   312580095     2085889    5  Étendue
/dev/sda5       308408320   312580095     2085888   82  partition d'échange Linux / Solaris

Disk /dev/sdb: 1500.3 GB, 1500291423744 bytes
255 têtes, 63 secteurs/piste, 182400 cylindres, total 2930256687 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x009e3046

Périphérique Amorce  Début        Fin      Blocs     Id  Système
/dev/sdb1   *          63  2930277167  1465138552+   7  HPFS/NTFS/exFAT
marnecht@pc-de-marnecht:~$ lsusb
Bus 001 Device 004: ID 0939:0b13 Lumberg, Inc.
Bus 001 Device 003: ID 0ac8:c326 Z-Star Microelectronics Corp. Namuga 1.3M Webcam
Bus 003 Device 002: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

J'avoue que je n'y comprends rien...

Gal3rienne.

Hors ligne

#7 Le 30/05/2013, à 10:55

michel_04

Re : [Résolu] DDE impossible à monter

Re,

Ton HDD est en ExFat. Voir cette page de la Documentation ExFat (Paragraphe 1).

A+

Hors ligne

#8 Le 30/05/2013, à 11:11

Gal3rienne

Re : [Résolu] DDE impossible à monter

J'ai fait ce que tu m'as dit, merci, puis j'ai redémarré la machine.
Malgré tout la même erreur subsiste.
Que me conseilles-tu ?

Gal3rienne.

Hors ligne

#9 Le 30/05/2013, à 11:20

michel_04

Re : [Résolu] DDE impossible à monter

Re,

Pour essai :

sudo mkdir /media/essai
sudo mount -t exfat-fuse /dev/sdb1 /media/essai

A+

Hors ligne

#10 Le 30/05/2013, à 11:21

navtex

Re : [Résolu] DDE impossible à monter

Apres avoir été installé ,le systeme doit recevoir des mises à jour ,a moins de l'avoir fait pendant l'install étant connecté.
-voir le gestionnaire de mises à jour.
Par rodage ,j'entends qu'il y a quelquefois des problemes au début qui s'arrangent quand des pilotes à jour sont bien en place.

Bizarre que fdisk detecte ton disque et pas lsusb qui affiche les usb connectés ,lumberg n'est pas toshiba ,j'imagine
que donne

dmesg

juste apres avoir plugué le disque


xubuntu 20.04  dell précision 4500
Voyager 16.04   sur Dell vostro 1720  2.66GHz × 2  - Ram 4Gio
Xubuntu 18.04  sur  Panasonic CF-M34  PIII 0,93Ghz   500Mo
Cours camarade le vieux monde est derriere toi

Hors ligne

#11 Le 30/05/2013, à 11:25

Gal3rienne

Re : [Résolu] DDE impossible à monter

j'ai bien crée le dossier essai, ensuite :

marnecht@pc-de-marnecht:~$ sudo mount -t exfat-fuse /dev/sdb1 /media/essai
FUSE exfat 1.0.1
ERROR: exFAT file system is not found.

Gal3rienne.

Hors ligne

#12 Le 30/05/2013, à 11:26

michel_04

Re : [Résolu] DDE impossible à monter

Re,

sudo mount -t ntfs-3g /dev/sdb1 /media/essai

Edit :

sudo ntfsck /dev/sdb1
sudo ntfsfix /dev/sd

A+

Dernière modification par michel_04 (Le 30/05/2013, à 11:33)

Hors ligne

#13 Le 30/05/2013, à 11:31

Gal3rienne

Re : [Résolu] DDE impossible à monter

Plein d'erreurs :

marnecht@pc-de-marnecht:~$ sudo mount -t ntfs-3g /dev/sdb1 /media/essai
Failed to read last sector (2930277104): Argument invalide
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
   or it was not setup correctly (e.g. by not using mdadm --build ...),
   or a wrong device is tried to be mounted,
   or the partition table is corrupt (partition is smaller than NTFS),
   or the NTFS boot sector is corrupt (NTFS size is not valid).
Failed to mount '/dev/sdb1': Argument invalide
The device '/dev/sdb1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
marnecht@pc-de-marnecht:~$ sudo ntfsck /dev/sdb1
Failed to read last sector (2930277104): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
   or it was not setup correctly (e.g. by not using mdadm --build ...),
   or a wrong device is tried to be mounted,
   or the partition table is corrupt (partition is smaller than NTFS),
   or the NTFS boot sector is corrupt (NTFS size is not valid).
file record corrupted at offset 0 (0x0).
Loading $MFT runlist failed. Trying $MFTMirr.
file record corrupted at offset 0 (0x0).
Loading $MFTMirr runlist failed too. Aborting.
Failed to read last sector (2930277104): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
   or it was not setup correctly (e.g. by not using mdadm --build ...),
   or a wrong device is tried to be mounted,
   or the partition table is corrupt (partition is smaller than NTFS),
   or the NTFS boot sector is corrupt (NTFS size is not valid).

Hors ligne

#14 Le 30/05/2013, à 11:36

Gal3rienne

Re : [Résolu] DDE impossible à monter

@Navtex : Voilà ce que je donne dmesg, mais je crois que je n'arrive pas à voir tout le résultat sur le terminal. Je ne sais pas ce que veut dire "plugué" le disque, je l'ai donc laissé branché.

[    0.282992] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.283004] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.283015] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.283037] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[    0.283053] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.283069] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.283081] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.283094] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.283109] pci 0000:00:1c.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.283123] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
[    0.283140] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.283151] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.283166] pci 0000:00:1c.2:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.283180] pci 0000:00:1c.2:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.283196] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    0.283303] pci 0000:00:1e.0: setting latency timer to 64
[    0.283317] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.283326] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.283336] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.283345] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.283355] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.283365] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.283374] pci_bus 0000:00: resource 10 [mem 0x80000000-0xfebfffff]
[    0.283383] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.283392] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[    0.283403] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[    0.283413] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.283423] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf02fffff]
[    0.283433] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.283444] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.283454] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.283464] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.283474] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.283483] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.283492] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.283502] pci_bus 0000:04: resource 10 [mem 0x80000000-0xfebfffff]
[    0.283613] NET: Registered protocol family 2
[    0.283788] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.284436] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.285604] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.286185] TCP: Hash tables configured (established 131072 bind 65536)
[    0.286201] TCP: reno registered
[    0.286219] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.286248] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.286502] NET: Registered protocol family 1
[    0.286560] pci 0000:00:02.0: Boot video device
[    0.286919] PCI: CLS 64 bytes, default 64
[    0.287083] Simple Boot Flag at 0x36 set to 0x1
[    0.288351] audit: initializing netlink socket (disabled)
[    0.288387] type=2000 audit(1369911837.288:1): initialized
[    0.353892] highmem bounce pool size: 64 pages
[    0.353941] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.359724] VFS: Disk quotas dquot_6.5.2
[    0.359901] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.362020] fuse init (API version 7.19)
[    0.362355] msgmni has been set to 1687
[    0.363618] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.363727] io scheduler noop registered
[    0.363735] io scheduler deadline registered (default)
[    0.363762] io scheduler cfq registered
[    0.364271] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.364515] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[    0.364800] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.364881] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.365110] intel_idle: MWAIT substates: 0x20220
[    0.365128] intel_idle: v0.4 model 0x1C
[    0.365133] intel_idle: lapic_timer_reliable_states 0x2
[    0.365140] Marking TSC unstable due to TSC halts in idle states deeper than C2
[    0.365815] ACPI: AC Adapter [ADP1] (off-line)
[    0.366069] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.366130] ACPI: Lid Switch [LID0]
[    0.366276] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.366291] ACPI: Power Button [PWRB]
[    0.366449] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.366461] ACPI: Sleep Button [SLPB]
[    0.366607] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.366620] ACPI: Power Button [PWRF]
[    0.366855] ACPI: Fan [FAN0] (off)
[    0.367040] ACPI: Requesting acpi_cpufreq
[    0.845559] Freeing initrd memory: 15116k freed
[    0.869880] thermal LNXTHERM:00: registered as thermal_zone0
[    0.869889] ACPI: Thermal Zone [TZ00] (47 C)
[    0.869954] ACPI: Battery Slot [BAT1] (battery present)
[    0.870058] GHES: HEST is not enabled!
[    0.870336] isapnp: Scanning for PnP cards...
[    0.870459] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.879514] Linux agpgart interface v0.103
[    0.880736] ACPI: Battery Slot [BAT1] (battery present)
[    0.880928] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[    0.881076] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    0.881220] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.881466] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.886483] brd: module loaded
[    0.889122] loop: module loaded
[    0.889558] ata_piix 0000:00:1f.2: version 2.13
[    0.889602] ata_piix 0000:00:1f.2: MAP [
[    0.889607]  P0 P2 IDE IDE ]
[    1.044063] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.044990] scsi0 : ata_piix
[    1.045213] scsi1 : ata_piix
[    1.047108] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    1.047117] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    1.048508] Fixed MDIO Bus: probed
[    1.048763] tun: Universal TUN/TAP device driver, 1.6
[    1.048769] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.049124] PPP generic driver version 2.4.2
[    1.049268] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.049389] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.049401] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.049421] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.049474] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.049496] ehci_hcd 0000:00:1d.7: debug port 1
[    1.053398] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.053446] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0544000
[    1.053547] ata2: port disabled--ignoring
[    1.064043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.064132] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.064142] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.064150] usb usb1: Product: EHCI Host Controller
[    1.064158] usb usb1: Manufacturer: Linux 3.5.0-31-generic ehci_hcd
[    1.064166] usb usb1: SerialNumber: 0000:00:1d.7
[    1.064568] hub 1-0:1.0: USB hub found
[    1.064584] hub 1-0:1.0: 8 ports detected
[    1.064808] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.064890] uhci_hcd: USB Universal Host Controller Interface driver
[    1.064957] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.064968] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.064986] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.065035] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    1.065145] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.065154] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.065162] usb usb2: Product: UHCI Host Controller
[    1.065170] usb usb2: Manufacturer: Linux 3.5.0-31-generic uhci_hcd
[    1.065178] usb usb2: SerialNumber: 0000:00:1d.0
[    1.065480] hub 2-0:1.0: USB hub found
[    1.065496] hub 2-0:1.0: 2 ports detected
[    1.065683] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.065694] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.065710] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.065780] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    1.065881] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.065890] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.065898] usb usb3: Product: UHCI Host Controller
[    1.065906] usb usb3: Manufacturer: Linux 3.5.0-31-generic uhci_hcd
[    1.065914] usb usb3: SerialNumber: 0000:00:1d.1
[    1.066205] hub 3-0:1.0: USB hub found
[    1.066220] hub 3-0:1.0: 2 ports detected
[    1.066403] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.066413] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.066431] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.066498] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    1.066598] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.066608] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.066616] usb usb4: Product: UHCI Host Controller
[    1.066624] usb usb4: Manufacturer: Linux 3.5.0-31-generic uhci_hcd
[    1.066631] usb usb4: SerialNumber: 0000:00:1d.2
[    1.066924] hub 4-0:1.0: USB hub found
[    1.066939] hub 4-0:1.0: 2 ports detected
[    1.067123] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.067133] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.067154] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.067221] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    1.067322] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.067331] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.067339] usb usb5: Product: UHCI Host Controller
[    1.067347] usb usb5: Manufacturer: Linux 3.5.0-31-generic uhci_hcd
[    1.067355] usb usb5: SerialNumber: 0000:00:1d.3
[    1.067649] hub 5-0:1.0: USB hub found
[    1.067670] hub 5-0:1.0: 2 ports detected
[    1.068109] usbcore: registered new interface driver libusual
[    1.068257] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.070296] i8042: Detected active multiplexing controller, rev 1.1
[    1.072141] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.072162] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.072259] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.072347] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.072440] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.072824] mousedev: PS/2 mouse device common for all mice
[    1.073421] rtc_cmos 00:08: RTC can wake from S4
[    1.073681] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    1.073733] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.073893] device-mapper: uevent: version 1.0.3
[    1.074094] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.074166] EISA: Probing bus 0 at eisa.0
[    1.074174] EISA: Cannot allocate resource for mainboard
[    1.074182] Cannot allocate resource for EISA slot 1
[    1.074189] Cannot allocate resource for EISA slot 2
[    1.074196] Cannot allocate resource for EISA slot 3
[    1.074203] Cannot allocate resource for EISA slot 4
[    1.074210] Cannot allocate resource for EISA slot 5
[    1.074218] Cannot allocate resource for EISA slot 6
[    1.074225] Cannot allocate resource for EISA slot 7
[    1.074232] Cannot allocate resource for EISA slot 8
[    1.074237] EISA: Detected 0 cards.
[    1.074379] cpuidle: using governor ladder
[    1.074547] cpuidle: using governor menu
[    1.074554] EFI Variables Facility v0.08 2004-May-17
[    1.075180] ashmem: initialized
[    1.075580] TCP: cubic registered
[    1.075974] NET: Registered protocol family 10
[    1.076569] NET: Registered protocol family 17
[    1.076603] Key type dns_resolver registered
[    1.076770] Using IPI No-Shortcut mode
[    1.077079] PM: Hibernation image not present or could not be loaded.
[    1.077121] registered taskstats version 1
[    1.083542] Key type trusted registered
[    1.089977] Key type encrypted registered
[    1.096552] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.097645]   Magic number: 13:925:75
[    1.097823] rtc_cmos 00:08: setting system clock to 2013-05-30 11:03:58 UTC (1369911838)
[    1.099134] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.099144] EDD information not available.
[    1.214123] ata1.00: ATA-8: SAMSUNG HM160HI, HH100-06, max UDMA7
[    1.214135] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.224595] isapnp: No Plug & Play device found
[    1.230384] ata1.00: configured for UDMA/133
[    1.230861] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM160HI  HH10 PQ: 0 ANSI: 5
[    1.231253] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.231339] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.231458] sd 0:0:0:0: [sda] Write Protect is off
[    1.231470] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.231571] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.324534]  sda: sda1 sda2 < sda5 >
[    1.325479] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.325640] Freeing unused kernel memory: 760k freed
[    1.326450] Write protecting the kernel text: 6052k
[    1.326599] Write protecting the kernel read-only data: 2476k
[    1.326606] NX-protecting the kernel data: 4188k
[    1.373232] udevd[93]: starting version 175
[    1.488157] usb 1-8: new high-speed USB device number 3 using ehci_hcd
[    1.641175] usb 1-8: New USB device found, idVendor=0ac8, idProduct=c326
[    1.641191] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.641202] usb 1-8: Product: Namuga 1.3M Webcam
[    1.641211] usb 1-8: Manufacturer: Vimicro Corp.
[    1.669484] sky2: driver version 1.30
[    1.669780] sky2 0000:03:00.0: Yukon-2 FE+ chip revision 0
[    1.670376] sky2 0000:03:00.0: irq 42 for MSI/MSI-X
[    1.671488] sky2 0000:03:00.0: eth0: addr 00:13:77:f0:c9:12
[    1.880099] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[    1.952264] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.050970] usb 3-2: New USB device found, idVendor=0a5c, idProduct=2101
[    2.050991] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.051005] usb 3-2: Product: BCM92045NMD
[    2.051029] usb 3-2: Manufacturer: Broadcom Corp
[    2.051037] usb 3-2: SerialNumber: 002119328D6F
[   11.509846] Adding 2085884k swap on /dev/sda5.  Priority:-1 extents:1 across:2085884k
[   11.528389] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.584669] udevd[321]: starting version 175
[   11.668133] lp: driver loaded but no devices found
[   11.899383] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   11.912273] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   11.916795] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[   12.006124] [drm] Initialized drm 1.1.0 20060810
[   12.097710] i915 0000:00:02.0: setting latency timer to 64
[   12.098570] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   12.098579] [drm] Driver supports precise vblank timestamp query.
[   12.134138] cfg80211: Calling CRDA to update world regulatory domain
[   12.139024] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   12.541342] ath5k 0000:02:00.0: registered as 'phy0'
[   12.552194] ppdev: user-space parallel port driver
[   12.575472] Bluetooth: Core ver 2.16
[   12.575701] NET: Registered protocol family 31
[   12.575711] Bluetooth: HCI device and connection manager initialized
[   12.575719] Bluetooth: HCI socket layer initialized
[   12.575726] Bluetooth: L2CAP socket layer initialized
[   12.575749] Bluetooth: SCO socket layer initialized
[   12.578235] [drm] initialized overlay support
[   12.608834] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.608845] Bluetooth: BNEP filters: protocol multicast
[   12.614952] fbcon: inteldrmfb (fb0) is primary device
[   12.616379] Console: switching to colour frame buffer device 128x37
[   12.616467] fb0: inteldrmfb frame buffer device
[   12.616473] drm: registered panic notifier
[   12.616562] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   12.719156] Bluetooth: RFCOMM TTY layer initialized
[   12.719179] Bluetooth: RFCOMM socket layer initialized
[   12.719186] Bluetooth: RFCOMM ver 1.11
[   12.766299] type=1400 audit(1369904650.164:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=607 comm="apparmor_parser"
[   12.766922] type=1400 audit(1369904650.164:3): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=608 comm="apparmor_parser"
[   12.773781] type=1400 audit(1369904650.172:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=608 comm="apparmor_parser"
[   12.774728] type=1400 audit(1369904650.172:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=608 comm="apparmor_parser"
[   12.782018] type=1400 audit(1369904650.180:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=607 comm="apparmor_parser"
[   12.929170] intel_rng: FWH not detected
[   12.946485] ACPI Warning: 0x00001060-0x0000107f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   12.946509] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.946517] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[   12.946528] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   12.946544] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.946554] ACPI Warning: 0x00001180-0x000011bf SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[   12.946569] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.946576] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.947805] leds_ss4200: no LED devices found
[   12.978043] usbcore: registered new interface driver btusb
[   13.123404] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   13.205788] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   13.211562] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   13.215971] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x20a
[   13.229117] Linux video capture interface: v2.00
[   13.249735] uvcvideo: Found UVC 1.00 device Namuga 1.3M Webcam (0ac8:c326)
[   13.265371] input: Namuga 1.3M Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input8
[   13.266529] usbcore: registered new interface driver uvcvideo
[   13.266551] USB Video Class driver (1.1.1)
[   13.441049] samsung_laptop: detected SABI interface: SwSmi@
[   13.811976] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[   13.849450] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[   13.857762] init: failsafe main process (712) killed by TERM signal
[   14.298537] type=1400 audit(1369904651.696:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=821 comm="apparmor_parser"
[   14.300105] type=1400 audit(1369904651.700:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=822 comm="apparmor_parser"
[   14.309218] type=1400 audit(1369904651.708:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=822 comm="apparmor_parser"
[   14.310287] type=1400 audit(1369904651.708:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=822 comm="apparmor_parser"
[   14.431805] type=1400 audit(1369904651.828:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=828 comm="apparmor_parser"
[   14.487869] sky2 0000:03:00.0: eth0: enabling interface
[   14.492318] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.504443] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.598133] ath: EEPROM regdomain: 0x65
[   14.598145] ath: EEPROM indicates we should expect a direct regpair map
[   14.598156] ath: Country alpha2 being used: 00
[   14.598162] ath: Regpair used: 0x65
[   14.598174] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   14.598183] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.598191] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   14.598199] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.598207] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   14.598216] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.598223] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   14.598232] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.598240] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   14.598248] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.598256] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   14.598265] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.598272] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   14.598281] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.598289] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   14.598297] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.598305] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   14.598314] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.598321] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   14.598330] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.598338] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   14.598346] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.598355] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   14.598363] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.598371] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   14.598380] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.598388] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   14.598678] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   14.645493] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.647646] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   14.658679] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   14.658694] cfg80211: World regulatory domain updated:
[   14.658701] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.658709] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.658718] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.658726] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.658734] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.658742] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.840358] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.843233] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.911400] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x20a
[   14.942444] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   15.915549] init: anacron main process (955) killed by TERM signal
[   16.583424] init: plymouth-stop pre-start process (1132) terminated with status 1
[   17.704193] wlan0: authenticate with 86:7d:ce:49:9a:6c
[   17.710702] wlan0: send auth to 86:7d:ce:49:9a:6c (try 1/3)
[   17.712203] wlan0: authenticated
[   17.720441] wlan0: associate with 86:7d:ce:49:9a:6c (try 1/3)
[   17.722812] wlan0: RX AssocResp from 86:7d:ce:49:9a:6c (capab=0x411 status=0 aid=3)
[   17.723657] wlan0: associated
[   17.724213] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   75.152139] usb 1-5: new high-speed USB device number 4 using ehci_hcd
[   75.285661] usb 1-5: New USB device found, idVendor=0939, idProduct=0b13
[   75.285681] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   75.285696] usb 1-5: Product: External HDD   
[   75.285709] usb 1-5: Manufacturer: TOSHIBA
[   75.285721] usb 1-5: SerialNumber: 0010101E60003269
[   75.327185] Initializing USB Mass Storage driver...
[   75.327756] scsi2 : usb-storage 1-5:1.0
[   75.328118] usbcore: registered new interface driver usb-storage
[   75.328128] USB Mass Storage support registered.
[   76.325447] scsi 2:0:0:0: Direct-Access     TOSHIBA  External HDD     1.07 PQ: 0 ANSI: 4
[   76.327733] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   76.330216] sd 2:0:0:0: [sdb] 2930256687 512-byte logical blocks: (1.50 TB/1.36 TiB)
[   76.330948] sd 2:0:0:0: [sdb] Write Protect is off
[   76.330960] sd 2:0:0:0: [sdb] Mode Sense: 00 26 00 00
[   76.331673] sd 2:0:0:0: [sdb] No Caching mode page present
[   76.331698] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   76.335722] sd 2:0:0:0: [sdb] No Caching mode page present
[   76.335739] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   76.669115]  sdb: sdb1
[   76.669135] sdb: p1 size 2930277105 extends beyond EOD, enabling native capacity
[   76.671398] sd 2:0:0:0: [sdb] No Caching mode page present
[   76.671417] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   76.679843]  sdb: sdb1
[   76.679866] sdb: p1 size 2930277105 extends beyond EOD, truncated
[   76.697879] sd 2:0:0:0: [sdb] No Caching mode page present
[   76.697896] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   76.697905] sd 2:0:0:0: [sdb] Attached SCSI disk
[  322.864730] audit_printk_skb: 36 callbacks suppressed
[  322.864747] type=1400 audit(1369904960.265:24): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=609 comm="cupsd" pid=609 comm="cupsd" capability=36  capname="block_suspend"
[ 1182.936254] type=1400 audit(1369905820.336:25): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=609 comm="cupsd" pid=609 comm="cupsd" capability=36  capname="block_suspend"

Hors ligne

#15 Le 30/05/2013, à 11:38

michel_04

Re : [Résolu] DDE impossible à monter

Re,

sudo ntfsfix /dev/sdb1

Tu as fait un chkdsk /f de ton HDD sous Windows ?

A+

Hors ligne

#16 Le 30/05/2013, à 11:45

Gal3rienne

Re : [Résolu] DDE impossible à monter

Oui, j'ai copié le résultat du scan en message 3.
marnecht@pc-de-marnecht:~$ sudo ntfsfix /dev/sdb1
Mounting volume... Failed to read last sector (2930277104): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
   or it was not setup correctly (e.g. by not using mdadm --build ...),
   or a wrong device is tried to be mounted,
   or the partition table is corrupt (partition is smaller than NTFS),
   or the NTFS boot sector is corrupt (NTFS size is not valid).
FAILED
Attempting to correct errors... Failed to read last sector (2930277104): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
   or it was not setup correctly (e.g. by not using mdadm --build ...),
   or a wrong device is tried to be mounted,
   or the partition table is corrupt (partition is smaller than NTFS),
   or the NTFS boot sector is corrupt (NTFS size is not valid).
FAILED
Failed to startup volume: Invalid argument
Failed to read last sector (2930277104): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
   or it was not setup correctly (e.g. by not using mdadm --build ...),
   or a wrong device is tried to be mounted,
   or the partition table is corrupt (partition is smaller than NTFS),
   or the NTFS boot sector is corrupt (NTFS size is not valid).
Trying the alternate boot sector
The alternate bootsector is usable
Set sector count to 2930256623 instead of 2930277104
Rewriting the bootsector
The boot sector has been rewritten

Processing $MFT and $MFTMirr...
Reading $MFT... OK
Reading $MFTMirr... OK
Comparing $MFTMirr to $MFT... OK
Processing of $MFT and $MFTMirr completed successfully.
Setting required flags on partition... OK
Going to empty the journal ($LogFile)... OK
NTFS volume version is 3.1.
NTFS partition /dev/sdb1 was processed successfully.

Hors ligne

#17 Le 30/05/2013, à 11:46

michel_04

Re : [Résolu] DDE impossible à monter

Re,

Gal3rienne a écrit :

Trying the alternate boot sector
The alternate bootsector is usable
Set sector count to 2930256623 instead of 2930277104
Rewriting the bootsector
The boot sector has been rewritten

Processing $MFT and $MFTMirr...
Reading $MFT... OK
Reading $MFTMirr... OK
Comparing $MFTMirr to $MFT... OK
Processing of $MFT and $MFTMirr completed successfully.
Setting required flags on partition... OK
Going to empty the journal ($LogFile)... OK
NTFS volume version is 3.1.
NTFS partition /dev/sdb1 was processed successfully.

Tu as essayé de reconnecter ton HDD ?

A+

Hors ligne

#18 Le 30/05/2013, à 11:52

Gal3rienne

Re : [Résolu] DDE impossible à monter

Génial ! Cela fonctionne.
Je te remercie sincèrement.
Pourrais-tu m'expliquer (en gros), quel était le problème et comment l'a-t-on résolu ?

Hors ligne

#19 Le 30/05/2013, à 12:03

michel_04

Re : [Résolu] DDE impossible à monter

Re,

Gal3rienne a écrit :

Pourrais-tu m'expliquer (en gros), quel était le problème et comment l'a-t-on résolu ?

Comme on peut le voir dans ton message #16, ntfsfix a réparé le système de fichiers inconsistant :

Gal3rienne a écrit :

Trying the alternate boot sector
The alternate bootsector is usable
Set sector count to 2930256623 instead of 2930277104
Rewriting the bootsector
The boot sector has been rewritten

Processing $MFT and $MFTMirr...
Reading $MFT... OK
Reading $MFTMirr... OK
Comparing $MFTMirr to $MFT... OK
Processing of $MFT and $MFTMirr completed successfully.
Setting required flags on partition... OK
Going to empty the journal ($LogFile)... OK
NTFS volume version is 3.1.
NTFS partition /dev/sdb1 was processed successfully.

michel@Michel-E320:~$ man ntfsfix

NTFSFIX(8)                                                          NTFSFIX(8)

NAME
       ntfsfix - fix common errors and force Windows to check NTFS

SYNOPSIS
       ntfsfix [options] device

DESCRIPTION
       ntfsfix  is a utility that fixes some common NTFS problems.  ntfsfix is
       NOT a Linux version of chkdsk.  It only repairs some  fundamental  NTFS
       inconsistencies,  resets  the  NTFS  journal file and schedules an NTFS
       consistency check for the first boot into Windows.

       You may run ntfsfix on an NTFS volume if you think it  was  damaged  by
       Windows or some other way and it cannot be mounted.

OPTIONS
       Below is a summary of all the options that ntfsfix accepts.  Nearly all
       options have two equivalent names.  The short name is preceded by - and
       the long name is preceded by --.  Any single letter options, that don't
       take an argument, can be combined into a single command, e.g.   -fv  is
       equivalent  to  -f  -v.   Long  named options can be abbreviated to any
 Manual page ntfsfix(8) line 1 (press h for help or q to quit)

Tu peux ajouter [Résolu] au titre de ton post en cliquant sur "Modifier" au bas de ton premier message, merci.

A+

Hors ligne

#20 Le 30/05/2013, à 13:01

Gal3rienne

Re : [Résolu] DDE impossible à monter

Super, encore merci à vous !

Gal3rienne.

Hors ligne