#1 Le 13/07/2013, à 10:43
- nam1962
Xubuntu 13.04 boot lent
Depuis quelques temps, je trouve que le démarrage est long, très long. Ensuite mon Xubuntu est toujours aussi véloce, mais le boot prend presque 1 minute (en version beta ca devait être max 15 secondes.)
A votre avis où dois je regarder ?
Dernière modification par nam1962 (Le 13/07/2013, à 10:43)
[ Modéré ]
Hors ligne
#2 Le 27/07/2013, à 23:05
- hibou7
Re : Xubuntu 13.04 boot lent
En principe, les logs de boot sont accessible par dmesg.
Terminal > taper: dmesg puis entrée.
Tu peux copier le résultat et on peut regarder ça ensemble.
Xubuntu 22.04 sur HP ENVY TS Sleekbook 4 | CPU: Intel Core i5-3337U | RAM: 8 Gio
Débuter en Console
Si GNU/Linux ne répond plus, le redémarrer proprement avec la combinaison de touches:
Alt + SysRq + REISUB (Retourne en Islande sur un bateau).
Hors ligne
#3 Le 28/07/2013, à 09:05
- F50
Re : Xubuntu 13.04 boot lent
Regarde dans boot.log et syslog si y'a pas un truck coince et où. Tu peux aussi virer les .pack de /var/lib/ureadahead/ pour les régénérer.
#4 Le 28/07/2013, à 20:24
- nam1962
Re : Xubuntu 13.04 boot lent
Merci je regarde
Pour le retour de dmesg, voilà une de mes bécanes (le portable) :
[ 0.000000] ACPI: WDAT 000000009afe7000 00224 (v01 HPQOEM 18A4 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 000000009afe6000 006FE (v01 HPQOEM 18A4 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 000000009afe4000 00028 (v01 HPQOEM 18A4 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 000000009afe3000 004C1 (v01 HPQOEM 18A4 00001000 ACPI 00040000)
[ 0.000000] ACPI: ASPT 000000009afe1000 00034 (v07 HPQOEM 18A4 00000001 HP 00040000)
[ 0.000000] ACPI: DBGP 000000009afe0000 00034 (v01 HPQOEM 18A4 00000001 HP 00040000)
[ 0.000000] ACPI: FPDT 000000009afde000 00044 (v01 HPQOEM 18A4 00000001 HP 00040000)
[ 0.000000] ACPI: MSDM 000000009afdd000 00055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 000000009afdc000 009AA (v01 HPQOEM 18A4 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afdb000 00A92 (v01 HPQOEM 18A4 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afd7000 01F1F (v01 HPQOEM 18A4 00001000 ACPI 00040000)
[ 0.000000] ACPI: UEFI 000000009afda000 0005C (v01 HPQOEM 18A4 00000000 HP 00040000)
[ 0.000000] ACPI: BGRT 000000009afd9000 00038 (v01 HPQOEM 18A4 00000001 HP 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001df5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1df5fffff]
[ 0.000000] NODE_DATA [mem 0x1df5fb000-0x1df5fffff]
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff8801d8c00000-ffff8801debfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1df5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0x90cc0fff]
[ 0.000000] node 0: [mem 0x91a42000-0x9a4befff]
[ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
[ 0.000000] node 0: [mem 0x100000000-0x1df5fffff]
[ 0.000000] On node 0 totalpages: 1542327
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 120 pages reserved
[ 0.000000] DMA zone: 3776 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9741 pages used for memmap
[ 0.000000] DMA32 zone: 613682 pages, LIFO batch:31
[ 0.000000] Normal zone: 14296 pages used for memmap
[ 0.000000] Normal zone: 900648 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000088000 - 00000000000c0000
[ 0.000000] PM: Registered nosave memory: 00000000000c0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 0000000090cc1000 - 0000000091a42000
[ 0.000000] PM: Registered nosave memory: 000000009a4bf000 - 000000009aebf000
[ 0.000000] PM: Registered nosave memory: 000000009aebf000 - 000000009afbf000
[ 0.000000] PM: Registered nosave memory: 000000009afbf000 - 000000009afff000
[ 0.000000] PM: Registered nosave memory: 000000009b000000 - 000000009fa00000
[ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb80000
[ 0.000000] PM: Registered nosave memory: 00000000ffb80000 - 0000000100000000
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801df200000 s85056 r8192 d21440 u262144
[ 0.000000] pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1518106
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-27-generic root=UUID=2db2e89d-de3e-469b-bf56-425af700378f ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5919364k/7854080k available (7012k kernel code, 1684772k absent, 249944k reserved, 6230k data, 996k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 25165824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2394.504 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.00 BogoMIPS (lpj=9578016)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.036641] Security Framework initialized
[ 0.036650] AppArmor: AppArmor initialized
[ 0.036651] Yama: becoming mindful.
[ 0.037164] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.038779] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.039474] Mount-cache hash table entries: 256
[ 0.039627] Initializing cgroup subsys cpuacct
[ 0.039629] Initializing cgroup subsys memory
[ 0.039635] Initializing cgroup subsys devices
[ 0.039636] Initializing cgroup subsys freezer
[ 0.039638] Initializing cgroup subsys blkio
[ 0.039639] Initializing cgroup subsys perf_event
[ 0.039641] Initializing cgroup subsys hugetlb
[ 0.039663] CPU: Physical Processor ID: 0
[ 0.039664] CPU: Processor Core ID: 0
[ 0.039668] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.039668] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.039670] mce: CPU supports 7 MCE banks
[ 0.039681] CPU0: Thermal monitoring enabled (TM1)
[ 0.039688] process: using mwait in idle threads
[ 0.039691] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.039691] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.039691] tlb_flushall_shift: 5
[ 0.039830] Freeing SMP alternatives: 24k freed
[ 0.042348] ACPI: Core revision 20121018
[ 0.068048] ftrace: allocating 26709 entries in 105 pages
[ 0.081793] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.121419] smpboot: CPU0: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
[ 0.121427] TSC deadline timer enabled
[ 0.121432] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.121438] ... version: 3
[ 0.121439] ... bit width: 48
[ 0.121440] ... generic registers: 4
[ 0.121442] ... value mask: 0000ffffffffffff
[ 0.121443] ... max period: 000000007fffffff
[ 0.121444] ... fixed-purpose events: 3
[ 0.121445] ... event mask: 000000070000000f
[ 0.135508] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.122403] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.161905] Brought up 4 CPUs
[ 0.161908] smpboot: Total of 4 processors activated (19156.03 BogoMIPS)
[ 0.165098] devtmpfs: initialized
[ 0.165945] EVM: security.selinux
[ 0.165947] EVM: security.SMACK64
[ 0.165948] EVM: security.capability
[ 0.165990] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[ 0.166696] regulator-dummy: no parameters
[ 0.166737] NET: Registered protocol family 16
[ 0.166863] ACPI: bus type pci registered
[ 0.166928] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.166930] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.192168] PCI: Using configuration type 1 for base access
[ 0.192956] bio: create slab <bio-0> at 0
[ 0.193032] ACPI: Added _OSI(Module Device)
[ 0.193033] ACPI: Added _OSI(Processor Device)
[ 0.193035] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.193038] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.194915] ACPI: EC: Look up EC in DSDT
[ 0.197099] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.203416] ACPI: SSDT 000000009ae19018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
[ 0.203890] ACPI: Dynamic OEM Table Load:
[ 0.203893] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
[ 0.204164] ACPI: SSDT 000000009ae5ba98 00303 (v01 PmRef ApIst 00003000 INTL 20111123)
[ 0.204665] ACPI: Dynamic OEM Table Load:
[ 0.204667] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20111123)
[ 0.204787] ACPI: SSDT 000000009ae18d98 00119 (v01 PmRef ApCst 00003000 INTL 20111123)
[ 0.205251] ACPI: Dynamic OEM Table Load:
[ 0.205253] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20111123)
[ 0.206097] ACPI: Interpreter enabled
[ 0.206101] ACPI: (supports S0 S3 S4 S5)
[ 0.206120] ACPI: Using IOAPIC for interrupt routing
[ 0.332188] ACPI: Power Resource [FN00] (off)
[ 0.332277] ACPI: Power Resource [FN01] (off)
[ 0.332358] ACPI: Power Resource [FN02] (off)
[ 0.332439] ACPI: Power Resource [FN03] (off)
[ 0.332520] ACPI: Power Resource [FN04] (off)
[ 0.332854] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.333176] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.333180] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.333324] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.333326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.333475] \_SB_.PCI0:_OSC invalid UUID
[ 0.333476] _OSC request data:1 8 0
[ 0.333747] PCI host bridge to bus 0000:00
[ 0.333750] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.333758] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.333760] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.333762] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.333764] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.333765] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.333767] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.333769] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.333770] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.333772] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.333774] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.333775] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.333777] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.333779] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.333780] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.333782] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.333783] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.333785] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 0.333794] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.333830] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.333862] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.333881] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.333891] pci 0000:00:02.0: reg 10: [mem 0xc1000000-0xc13fffff 64bit]
[ 0.333897] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.333902] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 0.333954] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.333977] pci 0000:00:14.0: reg 10: [mem 0xc1700000-0xc170ffff 64bit]
[ 0.334050] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.334075] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.334099] pci 0000:00:16.0: reg 10: [mem 0xc1714000-0xc171400f 64bit]
[ 0.334177] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.334213] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.334235] pci 0000:00:1a.0: reg 10: [mem 0xc1719000-0xc17193ff]
[ 0.334327] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.334355] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.334371] pci 0000:00:1b.0: reg 10: [mem 0xc1710000-0xc1713fff 64bit]
[ 0.334441] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.334466] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.334546] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.334572] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.334651] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.334687] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.334709] pci 0000:00:1d.0: reg 10: [mem 0xc1718000-0xc17183ff]
[ 0.334800] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.334828] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.334955] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 0.334974] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
[ 0.334983] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
[ 0.334991] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
[ 0.334999] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
[ 0.335008] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 0.335016] pci 0000:00:1f.2: reg 24: [mem 0xc1717000-0xc17177ff]
[ 0.335063] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.335082] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.335099] pci 0000:00:1f.3: reg 10: [mem 0xc1715000-0xc17150ff 64bit]
[ 0.335120] pci 0000:00:1f.3: reg 20: [io 0x4040-0x405f]
[ 0.335179] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[ 0.335191] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.335201] pci 0000:01:00.0: reg 18: [mem 0xc0000000-0xc001ffff 64bit]
[ 0.335208] pci 0000:01:00.0: reg 20: [io 0x3000-0x30ff]
[ 0.335220] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.335249] pci 0000:01:00.0: supports D1 D2
[ 0.341773] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.341781] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.341789] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc0ffffff]
[ 0.341799] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.341915] pci 0000:07:00.0: [10ec:5289] type 00 class 0xff0000
[ 0.341936] pci 0000:07:00.0: reg 10: [mem 0xc1600000-0xc160ffff]
[ 0.342093] pci 0000:07:00.0: supports D1 D2
[ 0.342095] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.342156] pci 0000:07:00.2: [10ec:8168] type 00 class 0x020000
[ 0.342177] pci 0000:07:00.2: reg 10: [io 0x2000-0x20ff]
[ 0.342211] pci 0000:07:00.2: reg 18: [mem 0xc1404000-0xc1404fff 64bit pref]
[ 0.342233] pci 0000:07:00.2: reg 20: [mem 0xc1400000-0xc1403fff 64bit pref]
[ 0.342327] pci 0000:07:00.2: supports D1 D2
[ 0.342329] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.349788] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.349798] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.349808] pci 0000:00:1c.0: bridge window [mem 0xc1600000-0xc16fffff]
[ 0.349822] pci 0000:00:1c.0: bridge window [mem 0xc1400000-0xc14fffff 64bit pref]
[ 0.351551] pci 0000:08:00.0: [1814:3290] type 00 class 0x028000
[ 0.351571] pci 0000:08:00.0: reg 10: [mem 0xc1510000-0xc151ffff]
[ 0.351713] pci 0000:08:00.0: PME# supported from D0 D3hot
[ 0.351763] pci 0000:08:00.1: [1814:3298] type 00 class 0x0d1100
[ 0.351782] pci 0000:08:00.1: reg 10: [mem 0xc1500000-0xc150ffff]
[ 0.351923] pci 0000:08:00.1: supports D1
[ 0.351925] pci 0000:08:00.1: PME# supported from D0 D1 D3hot
[ 0.361054] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.361061] pci 0000:00:1c.1: bridge window [mem 0xc1500000-0xc15fffff]
[ 0.361102] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.361133] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.361174] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.361260] \_SB_.PCI0:_OSC invalid UUID
[ 0.361261] _OSC request data:1 1f 0
[ 0.361264] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.361266] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.361849] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.361890] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.361929] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.361967] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.362006] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.362045] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.362086] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.362129] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.362218] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.362223] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.362224] vgaarb: loaded
[ 0.362225] vgaarb: bridge control possible 0000:01:00.0
[ 0.362226] vgaarb: no bridge control possible 0000:00:02.0
[ 0.362367] SCSI subsystem initialized
[ 0.362369] ACPI: bus type scsi registered
[ 0.362407] libata version 3.00 loaded.
[ 0.362420] ACPI: bus type usb registered
[ 0.362433] usbcore: registered new interface driver usbfs
[ 0.362441] usbcore: registered new interface driver hub
[ 0.362458] usbcore: registered new device driver usb
[ 0.362524] PCI: Using ACPI for IRQ routing
[ 0.369145] PCI: pci_cache_line_size set to 64 bytes
[ 0.369219] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.369221] e820: reserve RAM buffer [mem 0x90cc1000-0x93ffffff]
[ 0.369222] e820: reserve RAM buffer [mem 0x9a4bf000-0x9bffffff]
[ 0.369224] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 0.369225] e820: reserve RAM buffer [mem 0x1df600000-0x1dfffffff]
[ 0.369301] NetLabel: Initializing
[ 0.369302] NetLabel: domain hash size = 128
[ 0.369303] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.369312] NetLabel: unlabeled traffic allowed by default
[ 0.369363] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.369368] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.371380] Switching to clocksource hpet
[ 0.375912] AppArmor: AppArmor Filesystem Enabled
[ 0.375935] pnp: PnP ACPI init
[ 0.375946] ACPI: bus type pnp registered
[ 0.375980] pnp 00:00: [dma 4]
[ 0.375997] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.376015] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.376105] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.376133] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.376169] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.376172] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.376174] system 00:04: [io 0xffff] has been reserved
[ 0.376175] system 00:04: [io 0xffff] has been reserved
[ 0.376177] system 00:04: [io 0x0400-0x0453] has been reserved
[ 0.376179] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.376181] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.376183] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.376186] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.376207] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.376244] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.376247] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.376278] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 0.376304] pnp 00:08: Plug and Play ACPI device, IDs SYN1e76 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.435467] pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.435574] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.435576] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.435578] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.435580] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.435582] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.435584] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.435586] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.435588] system 00:0a: [mem 0xff000000-0xff000fff] has been reserved
[ 0.435590] system 00:0a: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.435592] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.435594] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 0.435596] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.435948] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[ 0.435950] system 00:0b: [mem 0x40000000-0x401fffff] has been reserved
[ 0.435952] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.436036] pnp: PnP ACPI: found 12 devices
[ 0.436037] ACPI: ACPI bus type pnp unregistered
[ 0.442136] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.442167] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0020000-0xc003ffff pref]
[ 0.442169] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.442172] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.442175] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc0ffffff]
[ 0.442177] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.442181] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.442184] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.442190] pci 0000:00:1c.0: bridge window [mem 0xc1600000-0xc16fffff]
[ 0.442194] pci 0000:00:1c.0: bridge window [mem 0xc1400000-0xc14fffff 64bit pref]
[ 0.442201] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.442206] pci 0000:00:1c.1: bridge window [mem 0xc1500000-0xc15fffff]
[ 0.442236] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.442238] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.442240] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.442241] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.442243] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.442245] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.442246] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.442248] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.442250] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.442251] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.442253] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.442255] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.442256] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.442258] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.442260] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.442261] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.442263] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff]
[ 0.442265] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.442267] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc0ffffff]
[ 0.442268] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.442270] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
[ 0.442272] pci_bus 0000:07: resource 1 [mem 0xc1600000-0xc16fffff]
[ 0.442274] pci_bus 0000:07: resource 2 [mem 0xc1400000-0xc14fffff 64bit pref]
[ 0.442276] pci_bus 0000:08: resource 1 [mem 0xc1500000-0xc15fffff]
[ 0.442303] NET: Registered protocol family 2
[ 0.442471] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.442672] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.442797] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.442821] TCP: reno registered
[ 0.442834] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.442864] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.442936] NET: Registered protocol family 1
[ 0.442949] pci 0000:00:02.0: Boot video device
[ 0.475313] PCI: CLS 64 bytes, default 64
[ 0.475382] Trying to unpack rootfs image as initramfs...
[ 0.719196] Freeing initrd memory: 15880k freed
[ 0.721138] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.721144] software IO TLB [mem 0x92cc2000-0x96cc2000] (64MB) mapped at [ffff880092cc2000-ffff880096cc1fff]
[ 0.721178] Simple Boot Flag at 0x44 set to 0x1
[ 0.721530] Initialise module verification
[ 0.721566] audit: initializing netlink socket (disabled)
[ 0.721580] type=2000 audit(1375018294.704:1): initialized
[ 0.747516] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.748729] VFS: Disk quotas dquot_6.5.2
[ 0.748765] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.749151] fuse init (API version 7.20)
[ 0.749211] msgmni has been set to 11694
[ 0.749590] Key type asymmetric registered
[ 0.749592] Asymmetric key parser 'x509' registered
[ 0.749618] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.749643] io scheduler noop registered
[ 0.749645] io scheduler deadline registered (default)
[ 0.749651] io scheduler cfq registered
[ 0.749740] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.749862] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.749873] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.749916] efifb: probing for efifb
[ 0.750418] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90021480000, using 4160k, total 4160k
[ 0.750419] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.750420] efifb: scrolling: redraw
[ 0.750422] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.752898] Console: switching to colour frame buffer device 170x48
[ 0.755187] fb0: EFI VGA frame buffer device
[ 0.755192] intel_idle: MWAIT substates: 0x21120
[ 0.755193] intel_idle: v0.4 model 0x2A
[ 0.755194] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.755276] ACPI: AC Adapter [ACAD] (on-line)
[ 0.755365] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[ 0.755369] ACPI: Power Button [PWRB]
[ 0.755403] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.755477] ACPI: Lid Switch [LID0]
[ 0.755505] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.755507] ACPI: Power Button [PWRF]
[ 0.755551] ACPI: Fan [FAN0] (off)
[ 0.755572] ACPI: Fan [FAN1] (off)
[ 0.755590] ACPI: Fan [FAN2] (off)
[ 0.755609] ACPI: Fan [FAN3] (off)
[ 0.755630] ACPI: Fan [FAN4] (off)
[ 0.755676] ACPI: Requesting acpi_cpufreq
[ 0.876190] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.876192] ACPI: Thermal Zone [TZ00] (44 C)
[ 0.876411] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.876413] ACPI: Thermal Zone [TZ01] (44 C)
[ 0.876460] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.876462] ACPI: Thermal Zone [TZ02] (28 C)
[ 0.876487] GHES: HEST is not enabled!
[ 0.876549] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.078400] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 1.078475] ACPI: Battery Slot [BAT1] (battery present)
[ 1.078562] Linux agpgart interface v0.103
[ 1.079568] brd: module loaded
[ 1.080121] loop: module loaded
[ 1.080371] libphy: Fixed MDIO Bus: probed
[ 1.080416] tun: Universal TUN/TAP device driver, 1.6
[ 1.080417] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.080458] PPP generic driver version 2.4.2
[ 1.080502] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.080503] ehci-pci: EHCI PCI platform driver
[ 1.080539] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 1.080543] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.080548] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.080562] ehci-pci 0000:00:1a.0: debug port 2
[ 1.084447] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.084464] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc1719000
[ 1.094349] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.094406] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.094412] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.094417] usb usb1: Product: EHCI Host Controller
[ 1.094422] usb usb1: Manufacturer: Linux 3.8.0-27-generic ehci_hcd
[ 1.094426] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.094525] hub 1-0:1.0: USB hub found
[ 1.094529] hub 1-0:1.0: 2 ports detected
[ 1.094608] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 1.094611] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.094615] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.094627] ehci-pci 0000:00:1d.0: debug port 2
[ 1.098522] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.098535] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc1718000
[ 1.110320] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.110364] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.110370] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.110375] usb usb2: Product: EHCI Host Controller
[ 1.110380] usb usb2: Manufacturer: Linux 3.8.0-27-generic ehci_hcd
[ 1.110385] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.110473] hub 2-0:1.0: USB hub found
[ 1.110476] hub 2-0:1.0: 2 ports detected
[ 1.110533] ehci-platform: EHCI generic platform driver
[ 1.110540] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.110550] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.110586] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.110589] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.110593] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.110676] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.110720] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[ 1.110762] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.110764] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.110766] usb usb3: Product: xHCI Host Controller
[ 1.110767] usb usb3: Manufacturer: Linux 3.8.0-27-generic xhci_hcd
[ 1.110769] usb usb3: SerialNumber: 0000:00:14.0
[ 1.110825] xHCI xhci_add_endpoint called for root hub
[ 1.110826] xHCI xhci_check_bandwidth called for root hub
[ 1.110840] hub 3-0:1.0: USB hub found
[ 1.110848] hub 3-0:1.0: 4 ports detected
[ 1.111108] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.111112] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.111131] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.111133] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.111134] usb usb4: Product: xHCI Host Controller
[ 1.111136] usb usb4: Manufacturer: Linux 3.8.0-27-generic xhci_hcd
[ 1.111138] usb usb4: SerialNumber: 0000:00:14.0
[ 1.111184] xHCI xhci_add_endpoint called for root hub
[ 1.111185] xHCI xhci_check_bandwidth called for root hub
[ 1.111200] hub 4-0:1.0: USB hub found
[ 1.111206] hub 4-0:1.0: 4 ports detected
[ 1.111516] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.148433] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.148443] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.148532] mousedev: PS/2 mouse device common for all mice
[ 1.151166] rtc_cmos 00:05: RTC can wake from S4
[ 1.151277] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.151305] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.151372] device-mapper: uevent: version 1.0.3
[ 1.151423] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 1.151483] cpuidle: using governor ladder
[ 1.151562] cpuidle: using governor menu
[ 1.151566] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.151567] EFI Variables Facility v0.08 2004-May-17
[ 1.163346] ashmem: initialized
[ 1.163480] TCP: cubic registered
[ 1.163555] NET: Registered protocol family 10
[ 1.163690] NET: Registered protocol family 17
[ 1.163699] Key type dns_resolver registered
[ 1.164017] Loading module verification certificates
[ 1.164892] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: b19078b01b96b975438ce0719f8a7eb15318eb67'
[ 1.164903] registered taskstats version 1
[ 1.167113] Key type trusted registered
[ 1.168773] Key type encrypted registered
[ 1.170854] rtc_cmos 00:05: setting system clock to 2013-07-28 13:31:35 UTC (1375018295)
[ 1.171476] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.171478] EDD information not available.
[ 1.172895] Freeing unused kernel memory: 996k freed
[ 1.173014] Write protecting the kernel read-only data: 12288k
[ 1.176018] Freeing unused kernel memory: 1168k freed
[ 1.178801] Freeing unused kernel memory: 1080k freed
[ 1.188238] udevd[107]: starting version 175
[ 1.190632] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.194669] Disabling lock debugging due to kernel taint
[ 1.194999] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[ 1.195052] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[ 1.195088] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[ 1.195121] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[ 1.195207] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.217456] rtsx_pci 0000:07:00.0: irq 42 for MSI/MSI-X
[ 1.217475] rtsx_pci 0000:07:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
[ 1.221606] ahci 0000:00:1f.2: version 3.0
[ 1.221683] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.224459] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.224727] r8169 0000:07:00.2: irq 44 for MSI/MSI-X
[ 1.224944] r8169 0000:07:00.2 eth0: RTL8411 at 0xffffc90000076000, 84:34:97:14:24:7b, XID 08800800 IRQ 44
[ 1.224947] r8169 0000:07:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.234152] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl RAID mode
[ 1.234159] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.234166] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.250607] scsi0 : ahci
[ 1.250705] scsi1 : ahci
[ 1.251307] scsi2 : ahci
[ 1.251398] scsi3 : ahci
[ 1.251582] scsi4 : ahci
[ 1.251642] scsi5 : ahci
[ 1.251734] ata1: SATA max UDMA/133 abar m2048@0xc1717000 port 0xc1717100 irq 43
[ 1.251739] ata2: SATA max UDMA/133 abar m2048@0xc1717000 port 0xc1717180 irq 43
[ 1.251743] ata3: SATA max UDMA/133 abar m2048@0xc1717000 port 0xc1717200 irq 43
[ 1.251745] ata4: DUMMY
[ 1.251747] ata5: DUMMY
[ 1.251749] ata6: DUMMY
[ 1.405976] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.538154] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.538173] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.538390] hub 1-1:1.0: USB hub found
[ 1.538484] hub 1-1:1.0: 6 ports detected
[ 1.538750] ACPI Warning: For \_SB_.PCI0.EHC2.HUBN.PR01.PR11._PLD: Return Package has no elements (empty) (20121018/nspredef-463)
[ 1.569727] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.569768] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.571722] ata3.00: ATAPI: hp DVD RAM UJ8C2, 1.00, max UDMA/133
[ 1.574350] ata3.00: configured for UDMA/133
[ 1.577700] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.579307] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100
[ 1.579318] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.600437] ata1.00: configured for UDMA/100
[ 1.600700] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54757 JE4O PQ: 0 ANSI: 5
[ 1.600884] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.600886] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.600890] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.600981] sd 0:0:0:0: [sda] Write Protect is off
[ 1.600984] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.601019] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.602521] scsi 2:0:0:0: CD-ROM hp DVD RAM UJ8C2 1.00 PQ: 0 ANSI: 5
[ 1.606830] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.606838] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.607038] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.607121] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.649612] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.667870] sda: sda1 sda2 sda3 sda4
[ 1.668341] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.717431] tsc: Refined TSC clocksource calibration: 2394.560 MHz
[ 1.717444] Switching to clocksource tsc
[ 1.781872] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.781883] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.782154] hub 2-1:1.0: USB hub found
[ 1.782240] hub 2-1:1.0: 8 ports detected
[ 1.949156] usb 3-4: new full-speed USB device number 2 using xhci_hcd
[ 1.966223] usb 3-4: New USB device found, idVendor=138a, idProduct=0018
[ 1.966233] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 1.966239] usb 3-4: SerialNumber: 47163a54f0d0
[ 2.037159] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 2.050646] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[ 2.050649] EXT4-fs (sda2): write access will be enabled during recovery
[ 2.186638] usb 1-1.1: New USB device found, idVendor=064e, idProduct=c33c
[ 2.186642] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.186645] usb 1-1.1: Product: HP Truevision HD
[ 2.186646] usb 1-1.1: Manufacturer: SuYin
[ 2.186648] usb 1-1.1: SerialNumber: HF1019-P62A-OV03-REV0201
[ 2.328669] usb 1-1.2: new low-speed USB device number 4 using ehci-pci
[ 2.426759] usb 1-1.2: New USB device found, idVendor=045e, idProduct=00a4
[ 2.426769] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.426775] usb 1-1.2: Product: Microsoft(R) Compact Optical Mouse
[ 2.426780] usb 1-1.2: Manufacturer: Microsoft
[ 2.436977] usbcore: registered new interface driver usbhid
[ 2.436979] usbhid: USB HID core driver
[ 2.439606] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[ 2.439704] hid-generic 0003:045E:00A4.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[ 3.380042] EXT4-fs (sda2): recovery complete
[ 3.386661] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.114370] ACPI Error: No handler for Region [RCM0] (ffff8801d60dcb40) [SystemCMOS] (20121018/evregion-376)
[ 5.114376] ACPI Error: Region SystemCMOS (ID=5) has no handler (20121018/exfldio-305)
[ 5.114381] ACPI Error: Method parse/execution failed [\_SB_.WMID.ESDT] (Node ffff8801d60cfb18), AE_NOT_EXIST (20121018/psparse-537)
[ 5.114387] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q42] (Node ffff8801d60f74d8), AE_NOT_EXIST (20121018/psparse-537)
[ 26.597459] Adding 17577980k swap on /dev/sda3. Priority:-1 extents:1 across:17577980k
[ 26.651385] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.689468] udevd[391]: starting version 175
[ 26.962474] type=1400 audit(1375018321.324:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=537 comm="apparmor_parser"
[ 26.962504] type=1400 audit(1375018321.324:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=500 comm="apparmor_parser"
[ 26.962823] type=1400 audit(1375018321.324:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=537 comm="apparmor_parser"
[ 26.962853] type=1400 audit(1375018321.324:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=500 comm="apparmor_parser"
[ 26.963014] type=1400 audit(1375018321.324:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=537 comm="apparmor_parser"
[ 26.963046] type=1400 audit(1375018321.324:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=500 comm="apparmor_parser"
[ 26.996016] lp: driver loaded but no devices found
[ 27.024789] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[ 27.024798] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 27.024803] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIX 1 (20121018/utaddress-251)
[ 27.024808] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20121018/utaddress-251)
[ 27.024813] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 3 (20121018/utaddress-251)
[ 27.024817] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 27.024819] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIX 1 (20121018/utaddress-251)
[ 27.024824] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20121018/utaddress-251)
[ 27.024828] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 3 (20121018/utaddress-251)
[ 27.024832] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 27.024834] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 27.032181] [drm] Initialized drm 1.1.0 20060810
[ 27.070362] wmi: Mapper loaded
[ 27.076075] [drm] Memory usable by graphics device = 2048M
[ 27.076081] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[ 27.076083] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 27.076120] Console: switching to colour dummy device 80x25
[ 27.096310] i915 0000:00:02.0: setting latency timer to 64
[ 27.120861] cfg80211: Calling CRDA to update world regulatory domain
[ 27.124012] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 27.140205] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 27.142056] hp_accel: laptop model unknown, using default axes configuration
[ 27.142382] lis3lv02d: unknown sensor type 0x0
[ 27.142391] hp_accel: probe of HPQ0004:00 failed with error -22
[ 27.149180] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 27.149842] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 27.149853] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 27.149854] [drm] Driver supports precise vblank timestamp query.
[ 27.149987] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 27.149990] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 27.150718] [drm] radeon defaulting to kernel modesetting.
[ 27.150722] [drm] radeon kernel modesetting enabled.
[ 27.150734] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 27.150781] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[ 27.183560] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 27.335611] cfg80211: World regulatory domain updated:
[ 27.335614] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 27.335616] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.335618] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 27.335620] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 27.335621] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.335622] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.379188] fbcon: inteldrmfb (fb0) is primary device
[ 27.607217] input: HP WMI hotkeys as /devices/virtual/input/input5
[ 28.098237] Console: switching to colour frame buffer device 170x48
[ 28.100583] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 28.100585] i915 0000:00:02.0: registered panic notifier
[ 28.100753] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 28.106052] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff880193d0b438 (20121018/exresop-422)
[ 28.106058] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20121018/dswexec-460)
[ 28.106062] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.DD02._BCM] (Node ffff8801d60db7d0), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 28.106067] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCM] (Node ffff8801d6113c08), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 28.106072] ACPI Error: Evaluating _BCM failed (20121018/video-372)
[ 28.106215] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 28.106266] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:37/LNXVIDEO:00/input/input6
[ 28.106338] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 28.107238] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff880193d0b5a0 (20121018/exresop-422)
[ 28.107242] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20121018/dswexec-460)
[ 28.107246] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.DD02._BCM] (Node ffff8801d60db7d0), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 28.107251] ACPI Error: Evaluating _BCM failed (20121018/video-372)
[ 28.107375] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 28.107414] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input7
[ 28.107487] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 28.107525] mei 0000:00:16.0: setting latency timer to 64
[ 28.107619] mei 0000:00:16.0: irq 46 for MSI/MSI-X
[ 28.107700] [drm] initializing kernel modesetting (TURKS 0x1002:0x6840 0x103C:0x18A5).
[ 28.107739] [drm] register mmio base: 0xC0000000
[ 28.107741] [drm] register mmio size: 131072
[ 28.107744] vga_switcheroo: enabled
[ 28.107876] ATPX version 1
[ 28.111150] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 28.147707] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 28.147792] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 28.147865] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 28.335607] Linux video capture interface: v2.00
[ 28.389916] uvcvideo: Found UVC 1.00 device HP Truevision HD (064e:c33c)
[ 28.398448] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input11
[ 28.399238] usbcore: registered new interface driver uvcvideo
[ 28.399241] USB Video Class driver (1.1.1)
[ 28.446587] ATOM BIOS: HP/Compal
[ 28.446609] [drm] GPU not posted. posting now...
[ 28.449474] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 28.449477] radeon 0000:01:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 28.451592] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 28.451595] [drm] RAM width 128bits DDR
[ 28.451659] [TTM] Zone kernel: Available graphics memory: 2995516 kiB
[ 28.451662] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 28.451663] [TTM] Initializing pool allocator
[ 28.451668] [TTM] Initializing DMA pool allocator
[ 28.451692] [drm] radeon: 2048M of VRAM memory ready
[ 28.451693] [drm] radeon: 512M of GTT memory ready.
[ 28.451719] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 28.452218] [drm] probing gen 2 caps for device 8086:101 = 2/0
[ 28.452222] [drm] PCIE gen 2 link speeds already enabled
[ 28.452412] [drm] Loading TURKS Microcode
[ 28.502739] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x26c00, board id: 2054, fw id: 1196324
[ 28.630700] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 28.668959] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 28.669082] radeon 0000:01:00.0: WB enabled
[ 28.669085] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880196b94c00
[ 28.669087] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880196b94c0c
[ 28.669089] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 28.669090] [drm] Driver supports precise vblank timestamp query.
[ 28.669122] radeon 0000:01:00.0: irq 48 for MSI/MSI-X
[ 28.669132] radeon 0000:01:00.0: radeon: using MSI.
[ 28.669164] [drm] radeon: irq initialized.
[ 28.685516] [drm] ring test on 0 succeeded in 1 usecs
[ 28.685576] [drm] ring test on 3 succeeded in 1 usecs
[ 28.685807] [drm] ib test on ring 0 succeeded in 0 usecs
[ 28.685856] [drm] ib test on ring 3 succeeded in 0 usecs
[ 28.686093] [drm] Radeon Display Connectors
[ 28.693435] [drm] Internal thermal controller with fan control
[ 28.694271] [drm] radeon: power management initialized
[ 28.694424] radeon 0000:01:00.0: No connectors reported connected with modes
[ 28.694426] [drm] Cannot find any crtc or sizes - going 1024x768
[ 28.695390] [drm] fb mappable at 0xA0142000
[ 28.695392] [drm] vram apper at 0xA0000000
[ 28.695393] [drm] size 3145728
[ 28.695394] [drm] fb depth is 24
[ 28.695395] [drm] pitch is 4096
[ 28.695488] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[ 28.695505] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 1
[ 28.769329] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 29.119106] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 29.581606] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 29.603324] init: failsafe main process (1134) killed by TERM signal
[ 29.941427] Bluetooth: Core ver 2.16
[ 29.941444] NET: Registered protocol family 31
[ 29.941446] Bluetooth: HCI device and connection manager initialized
[ 29.941453] Bluetooth: HCI socket layer initialized
[ 29.941455] Bluetooth: L2CAP socket layer initialized
[ 29.941459] Bluetooth: SCO socket layer initialized
[ 29.944448] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 29.944452] Bluetooth: BNEP filters: protocol multicast
[ 29.944460] Bluetooth: BNEP socket layer initialized
[ 29.944932] Bluetooth: RFCOMM TTY layer initialized
[ 29.944941] Bluetooth: RFCOMM socket layer initialized
[ 29.944942] Bluetooth: RFCOMM ver 1.11
[ 29.988646] type=1400 audit(1375018324.356:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1258 comm="apparmor_parser"
[ 29.989077] type=1400 audit(1375018324.356:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1258 comm="apparmor_parser"
[ 29.989315] type=1400 audit(1375018324.356:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1258 comm="apparmor_parser"
[ 29.991098] type=1400 audit(1375018324.356:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1257 comm="apparmor_parser"
[ 30.125495] ppdev: user-space parallel port driver
[ 30.138658] init: avahi-cups-reload main process (1289) terminated with status 1
[ 30.485490] r8169 0000:07:00.2 eth0: link down
[ 30.485534] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.485836] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.730572] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.730900] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 33.060137] wlan0: authenticate with 00:24:d4:d4:78:b4
[ 33.066837] wlan0: send auth to 00:24:d4:d4:78:b4 (try 1/3)
[ 33.069167] wlan0: authenticated
[ 33.070707] wlan0: associate with 00:24:d4:d4:78:b4 (try 1/3)
[ 33.073185] wlan0: RX AssocResp from 00:24:d4:d4:78:b4 (capab=0x411 status=0 aid=4)
[ 33.073384] wlan0: associated
[ 33.073404] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 34.673057] postgres (1729): /proc/1729/oom_adj is deprecated, please use /proc/1729/oom_score_adj instead.
[ 42.339655] Non-volatile memory driver v1.3
[ 45.332450] radeon: switched off
[ 45.413745] init: plymouth-stop pre-start process (2381) terminated with status 1
[ 187.837963] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.Puis le plus lent : le fixe -
[ 0.000000] RAMDISK: [mem 0x360f2000-0x37070fff]
[ 0.000000] ACPI: RSDP 00000000000fbcd0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000cff80000 0003C (v01 A_M_I_ OEMRSDT 10000814 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff80200 00084 (v02 A_M_I_ OEMFACP 10000814 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff80440 090AA (v01 A0751 A0751077 00000077 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cff8e000 00040
[ 0.000000] ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC 10000814 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG 10000814 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cff8e040 00081 (v01 A_M_I_ AMI_OEM 10000814 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff894f0 00038 (v01 A_M_I_ OEMHPET 10000814 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000cff89530 000B0 (v01 A_M_I_ OEMOSFR 10000814 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
[ 0.000000] NODE_DATA [mem 0x12fffb000-0x12fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xcff7ffff]
[ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
[ 0.000000] On node 0 totalpages: 1048335
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13246 pages used for memmap
[ 0.000000] DMA32 zone: 834498 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 193536 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000
[ 0.000000] PM: Registered nosave memory: 00000000cff8e000 - 00000000cffe0000
[ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s85056 r8192 d21440 u524288
[ 0.000000] pcpu-alloc: s85056 r8192 d21440 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031947
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-27-generic root=UUID=60c48e1f-92f1-4862-a539-0aa580db65b4 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4029604k/4980736k available (7012k kernel code, 787396k absent, 163736k reserved, 6230k data, 996k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3172.669 MHz processor
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6345.33 BogoMIPS (lpj=12690676)
[ 0.004006] pid_max: default: 32768 minimum: 301
[ 0.004031] Security Framework initialized
[ 0.004044] AppArmor: AppArmor initialized
[ 0.004045] Yama: becoming mindful.
[ 0.004315] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008907] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009772] Mount-cache hash table entries: 256
[ 0.009950] Initializing cgroup subsys cpuacct
[ 0.009953] Initializing cgroup subsys memory
[ 0.009961] Initializing cgroup subsys devices
[ 0.009962] Initializing cgroup subsys freezer
[ 0.009964] Initializing cgroup subsys blkio
[ 0.009965] Initializing cgroup subsys perf_event
[ 0.009968] Initializing cgroup subsys hugetlb
[ 0.009992] CPU: Physical Processor ID: 0
[ 0.009993] CPU: Processor Core ID: 0
[ 0.009995] mce: CPU supports 6 MCE banks
[ 0.010002] CPU0: Thermal monitoring enabled (TM2)
[ 0.010005] process: using mwait in idle threads
[ 0.010009] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.010009] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.010009] tlb_flushall_shift: -1
[ 0.010096] Freeing SMP alternatives: 24k freed
[ 0.012230] ACPI: Core revision 20121018
[ 0.016008] ftrace: allocating 26709 entries in 105 pages
[ 0.024411] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068380] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz (fam: 06, model: 17, stepping: 06)
[ 0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.072000] ... version: 2
[ 0.072000] ... bit width: 40
[ 0.072000] ... generic registers: 2
[ 0.072000] ... value mask: 000000ffffffffff
[ 0.072000] ... max period: 000000007fffffff
[ 0.072000] ... fixed-purpose events: 3
[ 0.072000] ... event mask: 0000000700000003
[ 0.072000] smpboot: Booting Node 0, Processors #1
[ 0.080024] Brought up 2 CPUs
[ 0.080029] smpboot: Total of 2 processors activated (12690.67 BogoMIPS)
[ 0.080122] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.084084] devtmpfs: initialized
[ 0.085177] EVM: security.selinux
[ 0.085179] EVM: security.SMACK64
[ 0.085180] EVM: security.capability
[ 0.085193] PM: Registering ACPI NVS region [mem 0xcff8e000-0xcffdffff] (335872 bytes)
[ 0.085193] regulator-dummy: no parameters
[ 0.085193] NET: Registered protocol family 16
[ 0.085193] ACPI: bus type pci registered
[ 0.085193] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.085193] PCI: not using MMCONFIG
[ 0.085193] PCI: Using configuration type 1 for base access
[ 0.085581] bio: create slab <bio-0> at 0
[ 0.085581] ACPI: Added _OSI(Module Device)
[ 0.085581] ACPI: Added _OSI(Processor Device)
[ 0.085581] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.085581] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.088454] ACPI: EC: Look up EC in DSDT
[ 0.089290] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.092994] ACPI: SSDT 00000000cff8e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.093196] ACPI: Dynamic OEM Table Load:
[ 0.093198] ACPI: SSDT (null) 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.093300] ACPI: SSDT 00000000cff8e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.093499] ACPI: Dynamic OEM Table Load:
[ 0.093502] ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.093602] ACPI: Interpreter enabled
[ 0.093606] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.093618] ACPI: Using IOAPIC for interrupt routing
[ 0.093633] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.093938] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.113419] ACPI: No dock devices found.
[ 0.113423] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.113462] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.113464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.113597] PCI host bridge to bus 0000:00
[ 0.113600] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.113601] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.113603] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.113605] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.113606] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.113608] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
[ 0.113616] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.113647] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.113675] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.113705] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.113739] pci 0000:00:1a.0: reg 20: [io 0xb800-0xb81f]
[ 0.113780] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.113813] pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f]
[ 0.113854] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.113887] pci 0000:00:1a.2: reg 20: [io 0xbc00-0xbc1f]
[ 0.113935] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.113952] pci 0000:00:1a.7: reg 10: [mem 0xfe7ffc00-0xfe7fffff]
[ 0.114025] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.114045] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.114057] pci 0000:00:1b.0: reg 10: [mem 0xfe7f8000-0xfe7fbfff 64bit]
[ 0.114110] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.114128] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.114181] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.114201] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.114254] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.114272] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.114325] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.114344] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.114378] pci 0000:00:1d.0: reg 20: [io 0xb080-0xb09f]
[ 0.114419] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.114452] pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f]
[ 0.114493] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.114526] pci 0000:00:1d.2: reg 20: [io 0xb480-0xb49f]
[ 0.114574] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.114591] pci 0000:00:1d.7: reg 10: [mem 0xfe7ff800-0xfe7ffbff]
[ 0.114665] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.114681] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.114732] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[ 0.114799] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.114839] pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018f
[ 0.114851] pci 0000:00:1f.2: reg 10: [io 0xa000-0xa007]
[ 0.114857] pci 0000:00:1f.2: reg 14: [io 0x9c00-0x9c03]
[ 0.114863] pci 0000:00:1f.2: reg 18: [io 0x9880-0x9887]
[ 0.114869] pci 0000:00:1f.2: reg 1c: [io 0x9800-0x9803]
[ 0.114875] pci 0000:00:1f.2: reg 20: [io 0x9480-0x948f]
[ 0.114882] pci 0000:00:1f.2: reg 24: [io 0x9400-0x940f]
[ 0.114918] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.114929] pci 0000:00:1f.3: reg 10: [mem 0xfe7ff400-0xfe7ff4ff 64bit]
[ 0.114946] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.114972] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[ 0.114984] pci 0000:00:1f.5: reg 10: [io 0xb000-0xb007]
[ 0.114990] pci 0000:00:1f.5: reg 14: [io 0xac00-0xac03]
[ 0.114996] pci 0000:00:1f.5: reg 18: [io 0xa880-0xa887]
[ 0.115002] pci 0000:00:1f.5: reg 1c: [io 0xa800-0xa803]
[ 0.115008] pci 0000:00:1f.5: reg 20: [io 0xa480-0xa48f]
[ 0.115015] pci 0000:00:1f.5: reg 24: [io 0xa400-0xa40f]
[ 0.115071] pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
[ 0.115082] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.115090] pci 0000:01:00.0: reg 18: [mem 0xfe8c0000-0xfe8dffff 64bit]
[ 0.115096] pci 0000:01:00.0: reg 20: [io 0xc000-0xc0ff]
[ 0.115106] pci 0000:01:00.0: reg 30: [mem 0xfe8a0000-0xfe8bffff pref]
[ 0.115130] pci 0000:01:00.0: supports D1 D2
[ 0.115146] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
[ 0.115156] pci 0000:01:00.1: reg 10: [mem 0xfe8fc000-0xfe8fffff 64bit]
[ 0.115201] pci 0000:01:00.1: supports D1 D2
[ 0.115225] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.115228] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.115230] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.115233] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.115263] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.115270] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.115315] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[ 0.115392] pci 0000:03:00.0: reg 24: [mem 0xfeafe000-0xfeafffff]
[ 0.115404] pci 0000:03:00.0: reg 30: [mem 0xfeae0000-0xfeaeffff pref]
[ 0.115449] pci 0000:03:00.0: PME# supported from D3hot
[ 0.115477] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[ 0.115498] pci 0000:03:00.1: reg 10: [io 0xdc00-0xdc07]
[ 0.115510] pci 0000:03:00.1: reg 14: [io 0xd880-0xd883]
[ 0.115522] pci 0000:03:00.1: reg 18: [io 0xd800-0xd807]
[ 0.115534] pci 0000:03:00.1: reg 1c: [io 0xd480-0xd483]
[ 0.115546] pci 0000:03:00.1: reg 20: [io 0xd400-0xd40f]
[ 0.115619] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.115627] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.115630] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.115633] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.115683] pci 0000:02:00.0: [1969:1048] type 00 class 0x020000
[ 0.115702] pci 0000:02:00.0: reg 10: [mem 0xfe9c0000-0xfe9fffff 64bit]
[ 0.115747] pci 0000:02:00.0: reg 30: [mem 0xfe9a0000-0xfe9bffff pref]
[ 0.115795] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.115812] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.115820] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.115824] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.115854] pci 0000:05:03.0: [1106:3044] type 00 class 0x0c0010
[ 0.115869] pci 0000:05:03.0: reg 10: [mem 0xfebff800-0xfebfffff]
[ 0.115877] pci 0000:05:03.0: reg 14: [io 0xec00-0xec7f]
[ 0.115935] pci 0000:05:03.0: supports D2
[ 0.115937] pci 0000:05:03.0: PME# supported from D2 D3hot D3cold
[ 0.115973] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.115976] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.115979] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.115983] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.115985] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.115986] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.115988] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.116002] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[ 0.116022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.116042] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.116092] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.116116] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.116148] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.116164] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.116166] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.116909] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.116941] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.116972] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.117005] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.117036] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.117067] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.117097] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.117128] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.117185] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.117185] vgaarb: loaded
[ 0.117185] vgaarb: bridge control possible 0000:01:00.0
[ 0.117185] SCSI subsystem initialized
[ 0.117185] ACPI: bus type scsi registered
[ 0.117185] libata version 3.00 loaded.
[ 0.117185] ACPI: bus type usb registered
[ 0.117185] usbcore: registered new interface driver usbfs
[ 0.117185] usbcore: registered new interface driver hub
[ 0.117185] usbcore: registered new device driver usb
[ 0.117185] PCI: Using ACPI for IRQ routing
[ 0.122145] PCI: pci_cache_line_size set to 64 bytes
[ 0.122202] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.122203] e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
[ 0.122267] NetLabel: Initializing
[ 0.122268] NetLabel: domain hash size = 128
[ 0.122269] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.122277] NetLabel: unlabeled traffic allowed by default
[ 0.122287] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.122287] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.122287] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.124010] Switching to clocksource hpet
[ 0.129108] AppArmor: AppArmor Filesystem Enabled
[ 0.129128] pnp: PnP ACPI init
[ 0.129138] ACPI: bus type pnp registered
[ 0.129195] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.129198] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.129230] pnp 00:01: [dma 4]
[ 0.129246] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.129274] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.129297] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.129317] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.129502] pnp 00:05: [dma 2]
[ 0.129536] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.129575] system 00:06: [io 0x0290-0x0297] has been reserved
[ 0.129578] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.129684] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.129686] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.129688] system 00:07: [io 0x0480-0x04bf] has been reserved
[ 0.129691] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.129692] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.129694] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.129696] system 00:07: [mem 0xffa00000-0xffafffff] has been reserved
[ 0.129698] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.129700] system 00:07: [mem 0xffe00000-0xffefffff] has been reserved
[ 0.129702] system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved
[ 0.129704] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.129757] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.129909] pnp 00:09: [dma 0 disabled]
[ 0.129952] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.130000] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.130002] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.130005] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.130043] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.130083] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.130085] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.130220] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.130222] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.130224] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.130226] system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.130229] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.130312] pnp: PnP ACPI: found 14 devices
[ 0.130313] ACPI: ACPI bus type pnp unregistered
[ 0.136215] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.136218] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000
[ 0.136224] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.136231] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.136233] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.136243] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.136245] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.136247] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.136249] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.136251] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.136254] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
[ 0.136257] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.136259] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.136261] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.136263] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.136265] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.136268] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.136270] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.136273] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.136276] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.136278] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.136282] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
[ 0.136285] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.136290] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.136292] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.136296] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.136299] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.136303] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.136305] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.136309] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.136312] pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.136316] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.136319] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.136322] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.136338] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.136348] pci 0000:00:1c.5: enabling device (0106 -> 0107)
[ 0.136354] pci 0000:00:1e.0: setting latency timer to 64
[ 0.136357] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.136359] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.136360] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.136362] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.136364] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.136365] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.136367] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.136369] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.136370] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.136372] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff]
[ 0.136374] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.136375] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.136377] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.136379] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.136380] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.136382] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.136384] pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.136385] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.136387] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.136389] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.136390] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.136392] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.136394] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.136395] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.136423] NET: Registered protocol family 2
[ 0.136560] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.136760] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.136939] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.136974] TCP: reno registered
[ 0.136982] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.137009] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.137071] NET: Registered protocol family 1
[ 0.137236] pci 0000:01:00.0: Boot video device
[ 0.137247] PCI: CLS 32 bytes, default 64
[ 0.137287] Trying to unpack rootfs image as initramfs...
[ 0.353071] Freeing initrd memory: 15868k freed
[ 0.357683] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.357689] software IO TLB [mem 0xcbf7e000-0xcff7e000] (64MB) mapped at [ffff8800cbf7e000-ffff8800cff7dfff]
[ 0.357999] Initialise module verification
[ 0.358042] audit: initializing netlink socket (disabled)
[ 0.358055] type=2000 audit(1375036178.356:1): initialized
[ 0.378212] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.379527] VFS: Disk quotas dquot_6.5.2
[ 0.379562] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.379944] fuse init (API version 7.20)
[ 0.380008] msgmni has been set to 7901
[ 0.380303] Key type asymmetric registered
[ 0.380305] Asymmetric key parser 'x509' registered
[ 0.380332] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.380352] io scheduler noop registered
[ 0.380354] io scheduler deadline registered (default)
[ 0.380358] io scheduler cfq registered
[ 0.380465] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.380522] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.380589] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.380653] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.380708] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.380719] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.380756] intel_idle: does not run on family 6 model 23
[ 0.380823] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.380828] ACPI: Power Button [PWRB]
[ 0.380859] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.380861] ACPI: Power Button [PWRF]
[ 0.380937] ACPI: Requesting acpi_cpufreq
[ 0.383046] GHES: HEST is not enabled!
[ 0.383958] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.404304] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.405244] Linux agpgart interface v0.103
[ 0.406258] brd: module loaded
[ 0.406757] loop: module loaded
[ 0.406834] ata_piix 0000:00:1f.2: version 2.13
[ 0.406849] ata_piix 0000:00:1f.2: MAP [
[ 0.406850] P0 -- P1 -- ]
[ 0.406878] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.407010] scsi0 : ata_piix
[ 0.407342] scsi1 : ata_piix
[ 0.407642] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[ 0.407645] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[ 0.407676] ata_piix 0000:00:1f.5: MAP [
[ 0.407678] P0 -- P1 -- ]
[ 0.407701] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.407815] scsi2 : ata_piix
[ 0.408091] scsi3 : ata_piix
[ 0.408340] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
[ 0.408342] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
[ 0.408532] libphy: Fixed MDIO Bus: probed
[ 0.408580] tun: Universal TUN/TAP device driver, 1.6
[ 0.408581] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.408608] PPP generic driver version 2.4.2
[ 0.408637] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.408639] ehci-pci: EHCI PCI platform driver
[ 0.408659] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 0.408662] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.408667] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.408677] ehci-pci 0000:00:1a.7: debug port 1
[ 0.412583] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.412594] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[ 0.424014] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.424048] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.424051] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.424054] usb usb1: Product: EHCI Host Controller
[ 0.424056] usb usb1: Manufacturer: Linux 3.8.0-27-generic ehci_hcd
[ 0.424059] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.424162] hub 1-0:1.0: USB hub found
[ 0.424166] hub 1-0:1.0: 6 ports detected
[ 0.424256] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 0.424259] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.424265] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.424275] ehci-pci 0000:00:1d.7: debug port 1
[ 0.428178] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.428188] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[ 0.440014] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.440028] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.440031] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.440034] usb usb2: Product: EHCI Host Controller
[ 0.440036] usb usb2: Manufacturer: Linux 3.8.0-27-generic ehci_hcd
[ 0.440039] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.440125] hub 2-0:1.0: USB hub found
[ 0.440129] hub 2-0:1.0: 6 ports detected
[ 0.440214] ehci-platform: EHCI generic platform driver
[ 0.440221] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.440232] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.440244] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.440246] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.440250] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.440275] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 0.440300] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.440302] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.440303] usb usb3: Product: UHCI Host Controller
[ 0.440305] usb usb3: Manufacturer: Linux 3.8.0-27-generic uhci_hcd
[ 0.440307] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.440365] hub 3-0:1.0: USB hub found
[ 0.440368] hub 3-0:1.0: 2 ports detected
[ 0.440419] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.440421] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.440425] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.440450] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.440472] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.440474] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.440475] usb usb4: Product: UHCI Host Controller
[ 0.440477] usb usb4: Manufacturer: Linux 3.8.0-27-generic uhci_hcd
[ 0.440479] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.440534] hub 4-0:1.0: USB hub found
[ 0.440537] hub 4-0:1.0: 2 ports detected
[ 0.440585] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.440587] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.440591] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.440609] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 0.440632] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.440634] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.440636] usb usb5: Product: UHCI Host Controller
[ 0.440637] usb usb5: Manufacturer: Linux 3.8.0-27-generic uhci_hcd
[ 0.440639] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.440694] hub 5-0:1.0: USB hub found
[ 0.440697] hub 5-0:1.0: 2 ports detected
[ 0.440750] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.440753] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.440756] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.440776] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 0.440800] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.440802] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.440803] usb usb6: Product: UHCI Host Controller
[ 0.440805] usb usb6: Manufacturer: Linux 3.8.0-27-generic uhci_hcd
[ 0.440807] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.440862] hub 6-0:1.0: USB hub found
[ 0.440865] hub 6-0:1.0: 2 ports detected
[ 0.440914] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.440916] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.440920] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.440945] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.440967] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.440969] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.440971] usb usb7: Product: UHCI Host Controller
[ 0.440972] usb usb7: Manufacturer: Linux 3.8.0-27-generic uhci_hcd
[ 0.440974] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.441030] hub 7-0:1.0: USB hub found
[ 0.441035] hub 7-0:1.0: 2 ports detected
[ 0.441087] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.441090] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.441094] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.441113] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 0.441134] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.441136] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.441137] usb usb8: Product: UHCI Host Controller
[ 0.441139] usb usb8: Manufacturer: Linux 3.8.0-27-generic uhci_hcd
[ 0.441141] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.441196] hub 8-0:1.0: USB hub found
[ 0.441199] hub 8-0:1.0: 2 ports detected
[ 0.441283] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.441284] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.441961] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.442031] mousedev: PS/2 mouse device common for all mice
[ 0.442118] rtc_cmos 00:02: RTC can wake from S4
[ 0.442208] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.442228] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.442291] device-mapper: uevent: version 1.0.3
[ 0.442333] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 0.442338] cpuidle: using governor ladder
[ 0.442340] cpuidle: using governor menu
[ 0.442342] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.442344] EFI Variables Facility v0.08 2004-May-17
[ 0.442458] ashmem: initialized
[ 0.442535] TCP: cubic registered
[ 0.442609] NET: Registered protocol family 10
[ 0.442738] NET: Registered protocol family 17
[ 0.442745] Key type dns_resolver registered
[ 0.442884] Loading module verification certificates
[ 0.443666] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: b19078b01b96b975438ce0719f8a7eb15318eb67'
[ 0.443675] registered taskstats version 1
[ 0.445447] Key type trusted registered
[ 0.446793] Key type encrypted registered
[ 0.448422] rtc_cmos 00:02: setting system clock to 2013-07-28 18:29:39 UTC (1375036179)
[ 0.448600] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.448602] EDD information not available.
[ 0.738520] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.738538] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.749056] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.880045] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.880142] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.881013] usb 1-1: New USB device found, idVendor=03f0, idProduct=5c12
[ 0.881017] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 0.881020] usb 1-1: Product: Officejet 6700
[ 0.881022] usb 1-1: Manufacturer: HP
[ 0.881029] usb 1-1: SerialNumber: CN2352G13N05RQ
[ 0.888334] ata2.00: ATA-8: WDC WD5000AAKS-00WWPA0, 01.03B01, max UDMA/133
[ 0.888337] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.888400] ata1.00: ATA-8: ST250DM001 HD256GJ, 1AR10001, max UDMA/133
[ 0.888404] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.896270] ata1.00: configured for UDMA/133
[ 0.896386] scsi 0:0:0:0: Direct-Access ATA ST250DM001 HD256 1AR1 PQ: 0 ANSI: 5
[ 0.896491] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 0.896527] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.896554] sd 0:0:0:0: [sda] Write Protect is off
[ 0.896557] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.896583] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.904263] ata2.00: configured for UDMA/133
[ 0.904354] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
[ 0.904449] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.904477] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 0.904494] sd 1:0:0:0: [sdb] Write Protect is off
[ 0.904496] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.904515] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.909405] sdb: sdb1
[ 0.909579] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 0.931315] sda: sda1 sda2
[ 0.931523] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.932551] Freeing unused kernel memory: 996k freed
[ 0.932769] Write protecting the kernel read-only data: 12288k
[ 0.935120] Freeing unused kernel memory: 1168k freed
[ 0.937421] Freeing unused kernel memory: 1080k freed
[ 0.944960] udevd[105]: starting version 175
[ 0.968155] Disabling lock debugging due to kernel taint
[ 0.968388] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60c
[ 0.972008] microcode: CPU0 updated to revision 0x60f, date = 2010-09-29
[ 0.974767] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60c
[ 0.976866] microcode: CPU1 updated to revision 0x60f, date = 2010-09-29
[ 0.981129] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.981164] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 0.981303] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.984027] scsi4 : pata_jmicron
[ 0.985097] scsi5 : pata_jmicron
[ 0.985296] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 0.985298] ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 0.994974] atl1 0000:02:00.0: version 2.1.3
[ 1.002789] ahci 0000:03:00.0: version 3.0
[ 1.016178] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.016183] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.018964] scsi6 : ahci
[ 1.020991] scsi7 : ahci
[ 1.021056] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[ 1.021060] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[ 1.028097] Floppy drive(s): fd0 is 1.44M
[ 1.047710] FDC 0 is a post-1991 82077
[ 1.084053] firewire_ohci 0000:05:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.149097] ata5.00: ATAPI: LTN526, YH0X, max UDMA/33
[ 1.149104] ata5.01: ATAPI: SAMSUNG CDRW/DVD SM-348B, T503, max UDMA/33
[ 1.156655] ata5.00: configured for UDMA/33
[ 1.172558] ata5.01: configured for UDMA/33
[ 1.174402] scsi 4:0:0:0: CD-ROM LITEON CD-ROM LTN526 YH0X PQ: 0 ANSI: 5
[ 1.176184] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 1.176186] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.176288] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.176432] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 1.177188] scsi 4:0:1:0: CD-ROM SAMSUNG CDRW/DVD SM-348B T503 PQ: 0 ANSI: 5
[ 1.178183] sr1: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
[ 1.178285] sr 4:0:1:0: Attached scsi CD-ROM sr1
[ 1.178413] sr 4:0:1:0: Attached scsi generic sg3 type 5
[ 1.187812] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.308016] usb 2-4: new high-speed USB device number 2 using ehci-pci
[ 1.340027] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.343334] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.356017] tsc: Refined TSC clocksource calibration: 3172.529 MHz
[ 1.356022] Switching to clocksource tsc
[ 1.456857] usb 2-4: New USB device found, idVendor=0cf3, idProduct=9271
[ 1.456861] usb 2-4: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 1.456864] usb 2-4: Product: USB2.0 WLAN
[ 1.456872] usb 2-4: Manufacturer: ATHEROS
[ 1.456874] usb 2-4: SerialNumber: 12345
[ 1.584077] firewire_core 0000:05:03.0: created device fw0: GUID 001e8c000012a86e, S400
[ 1.696014] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 1.878483] usb 4-1: New USB device found, idVendor=046d, idProduct=c525
[ 1.878488] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.878490] usb 4-1: Product: USB Receiver
[ 1.878493] usb 4-1: Manufacturer: Logitech
[ 2.124013] usb 4-2: new low-speed USB device number 3 using uhci_hcd
[ 2.301481] usb 4-2: New USB device found, idVendor=04f2, idProduct=0833
[ 2.301486] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.301489] usb 4-2: Product: USB Keyboard
[ 2.301491] usb 4-2: Manufacturer: CHICONY
[ 19.794467] Adding 8846332k swap on /dev/sda1. Priority:-1 extents:1 across:8846332k
[ 19.855820] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.877234] udevd[362]: starting version 175
[ 20.339392] type=1400 audit(1375036199.385:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=600 comm="apparmor_parser"
[ 20.339677] type=1400 audit(1375036199.385:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=600 comm="apparmor_parser"
[ 20.339837] type=1400 audit(1375036199.385:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=600 comm="apparmor_parser"
[ 20.340816] type=1400 audit(1375036199.389:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=601 comm="apparmor_parser"
[ 20.341098] type=1400 audit(1375036199.389:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=601 comm="apparmor_parser"
[ 20.341258] type=1400 audit(1375036199.389:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=601 comm="apparmor_parser"
[ 20.397247] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 20.397250] AMD IOMMUv2 functionality not available on this system
[ 20.406150] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 20.412893] lp: driver loaded but no devices found
[ 20.428929] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3791 MBytes.
[ 20.429056] <6>[fglrx] vendor: 1002 device: 68f9 count: 1
[ 20.429402] <6>[fglrx] ioport: bar 4, base 0xc000, size: 0x100
[ 20.429651] <6>[fglrx] Kernel PAT support is enabled
[ 20.429667] <6>[fglrx] module loaded - fglrx 12.10.5 [Jan 28 2013] with 1 minors
[ 20.464114] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 20.464529] cfg80211: Calling CRDA to update world regulatory domain
[ 20.501332] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 20.502242] usb 2-4: ath9k_htc: Firmware htc_9271.fw requested
[ 20.502820] usbcore: registered new interface driver ath9k_htc
[ 20.512489] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 20.515343] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 20.520976] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 20.526595] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2
[ 20.526832] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[ 20.526912] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 20.526991] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 20.527071] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 20.527149] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 20.527228] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 20.527306] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 20.527698] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 20.527746] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[ 20.535073] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 20.811172] cfg80211: World regulatory domain updated:
[ 20.811175] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.811177] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.811178] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.811180] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.811181] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.811183] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.917633] usbcore: registered new interface driver usbhid
[ 20.917635] usbhid: USB HID core driver
[ 20.985667] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input11
[ 20.986374] hid-generic 0003:046D:C525.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-1/input0
[ 20.990579] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input12
[ 20.990754] hid-generic 0003:046D:C525.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-1/input1
[ 20.990939] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input13
[ 20.991791] hid-generic 0003:04F2:0833.0003: input,hidraw2: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1a.1-2/input0
[ 21.002553] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input14
[ 21.002795] hid-generic 0003:04F2:0833.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:1a.1-2/input1
[ 21.143113] usb 2-4: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[ 21.378111] ath9k_htc 2-4:1.0: ath9k_htc: HTC initialized with 33 credits
[ 21.563609] ath9k_htc 2-4:1.0: ath9k_htc: FW Version: 1.3
[ 21.563611] ath: EEPROM regdomain: 0x809c
[ 21.563612] ath: EEPROM indicates we should expect a country code
[ 21.563614] ath: doing EEPROM country->regdmn map search
[ 21.563615] ath: country maps to regdmn code: 0x52
[ 21.563616] ath: Country alpha2 being used: CN
[ 21.563617] ath: Regpair used: 0x52
[ 21.570348] ieee80211 phy0: Atheros AR9271 Rev:1
[ 21.570362] cfg80211: Calling CRDA for country: CN
[ 21.573378] cfg80211: Regulatory domain changed to country: CN
[ 21.573381] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 21.573382] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 21.573384] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 21.988223] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 22.145115] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 23.658589] init: failsafe main process (1117) killed by TERM signal
[ 23.819549] type=1400 audit(1375036202.865:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1187 comm="apparmor_parser"
[ 23.823721] type=1400 audit(1375036202.869:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1186 comm="apparmor_parser"
[ 23.823941] type=1400 audit(1375036202.869:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1186 comm="apparmor_parser"
[ 23.825061] type=1400 audit(1375036202.873:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1187 comm="apparmor_parser"
[ 23.883805] Bluetooth: Core ver 2.16
[ 23.883821] NET: Registered protocol family 31
[ 23.883822] Bluetooth: HCI device and connection manager initialized
[ 23.884013] Bluetooth: HCI socket layer initialized
[ 23.884104] Bluetooth: L2CAP socket layer initialized
[ 23.884110] Bluetooth: SCO socket layer initialized
[ 23.886808] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.886810] Bluetooth: BNEP filters: protocol multicast
[ 23.886815] Bluetooth: BNEP socket layer initialized
[ 23.887814] Bluetooth: RFCOMM TTY layer initialized
[ 23.887826] Bluetooth: RFCOMM socket layer initialized
[ 23.887828] Bluetooth: RFCOMM ver 1.11
[ 24.106992] init: avahi-cups-reload main process (1228) terminated with status 1
[ 24.201296] ppdev: user-space parallel port driver
[ 24.695481] atl1 0000:02:00.0: irq 46 for MSI/MSI-X
[ 24.695548] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.695725] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.819262] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 24.819485] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.032526] wlan0: authenticate with 00:24:d4:d4:78:b4
[ 27.080044] wlan0: send auth to 00:24:d4:d4:78:b4 (try 1/3)
[ 27.081910] wlan0: authenticated
[ 27.084013] wlan0: associate with 00:24:d4:d4:78:b4 (try 1/3)
[ 27.086620] wlan0: RX AssocResp from 00:24:d4:d4:78:b4 (capab=0x411 status=0 aid=3)
[ 27.089994] wlan0: associated
[ 27.090005] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 29.368810] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ 29.539814] vboxdrv: Found 2 processor cores.
[ 29.540256] vboxdrv: fAsync=0 offMin=0x1ab offMax=0x6e7
[ 29.540463] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 29.540465] vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004).
[ 29.566734] vboxpci: IOMMU not found (not registered)
[ 80.434904] WARNING! power/level is deprecated; use power/control instead
[ 80.440861] usblp 1-1:1.1: usblp2: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5C12
[ 80.441225] usblp 1-1:1.3: usblp3: USB Bidirectional printer dev 2 if 3 alt 0 proto 2 vid 0x03F0 pid 0x5C12
[ 80.441680] usbcore: registered new interface driver usblp
[ 80.487265] Initializing USB Mass Storage driver...
[ 80.487351] scsi8 : usb-storage 1-1:1.2
[ 80.487652] usbcore: registered new interface driver usb-storage
[ 80.487654] USB Mass Storage support registered.
[ 81.484558] scsi 8:0:0:0: Direct-Access HP Officejet 6700 1.00 PQ: 0 ANSI: 5
[ 81.484892] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 81.486412] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 81.523137] usblp2: removed
[ 81.524281] usblp 1-1:1.1: usblp2: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5C12
[ 81.524483] usblp3: removed
[ 81.525340] usblp 1-1:1.3: usblp3: USB Bidirectional printer dev 2 if 3 alt 0 proto 2 vid 0x03F0 pid 0x5C12
[ 84.398620] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 84.398623] vesafb: scrolling: redraw
[ 84.398625] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 84.401469] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011000000, using 5824k, total 5824k
[ 84.401987] Console: switching to colour frame buffer device 175x65
[ 84.404939] fb0: VESA VGA frame buffer device
[ 84.460731] init: plymouth-splash main process (3294) terminated with status 1
[ 84.652979] fglrx_pci 0000:01:00.0: irq 47 for MSI/MSI-X
[ 84.653400] <6>[fglrx] Firegl kernel thread PID: 3314
[ 84.653447] <6>[fglrx] Firegl kernel thread PID: 3315
[ 84.653494] <6>[fglrx] Firegl kernel thread PID: 3316
[ 84.653563] <6>[fglrx] IRQ 47 Enabled
[ 84.657530] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 84.657532] <6>[fglrx] Reserved FB block: Unshared offset:f920000, size:3e0000
[ 84.657533] <6>[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 Dernière modification par nam1962 (Le 28/07/2013, à 20:33)
[ Modéré ]
Hors ligne
#5 Le 28/07/2013, à 22:42
- hibou7
Re : Xubuntu 13.04 boot lent
Bien.
Sur ton dmesg, on peut voir que le boot dure 84,65 sec, ce qui effectivement est très long.
Il y a un premier saut de 17 sec (de 2 à 19) avant que la swap soit prise en charge.
On ne peut pas y faire grand chose d'après cette discussion:
http://forum.ubuntu-fr.org/viewtopic.php?pid=3438532
Il y a un 2e saut de 51 sec (29 à 80). Suivi d'un avertissement:
[ 80.434904] WARNING! power/level is deprecated; use power/control insteadJe ne sais pas trop ce que ça veut dire. J'ai trouvé ceci dans le forum:
https://forum.ubuntu-fr.org/viewtopic.php?pid=13843691
Mais je ne vois pas le rapport. 
Essaye aussi les propositions de fcn50.
Sour Ubuntu, tu accèdes à boot.log par
cat /var/log/installer/syslogEt à syslog vraisemblablement par:
sudo cat /var/log/installer/syslogSous Xubuntu, ils sont evt rangés ailleurs, mais tu les trouveras avec la fonction "recherche de fichiers". Raccourcis > recherche de fichiers
Rechercher dans "Système de fichiers"
On y arrivera peut-être par recoupements...
Dernière modification par hibou7 (Le 28/07/2013, à 22:57)
Xubuntu 22.04 sur HP ENVY TS Sleekbook 4 | CPU: Intel Core i5-3337U | RAM: 8 Gio
Débuter en Console
Si GNU/Linux ne répond plus, le redémarrer proprement avec la combinaison de touches:
Alt + SysRq + REISUB (Retourne en Islande sur un bateau).
Hors ligne
#6 Le 29/07/2013, à 08:19
- F50
Re : Xubuntu 13.04 boot lent
Tu as un problème sur les deux machines, la première:
5.114370] ACPI Error: No handler for Region [RCM0] (ffff8801d60dcb40) [SystemCMOS] (20121018/evregion-376)
[ 5.114376] ACPI Error: Region SystemCMOS (ID=5) has no handler (20121018/exfldio-305)
[ 5.114381] ACPI Error: Method parse/execution failed [\_SB_.WMID.ESDT] (Node ffff8801d60cfb18), AE_NOT_EXIST (20121018/psparse-537)
[ 5.114387] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q42] (Node ffff8801d60f74d8), AE_NOT_EXIST (20121018/psparse-537)
[ 26.597459] Adding 17577980k swap on /dev/sda3. Priority:-1 extents:1 across:17577980k Ca semble venir du bios.
La deuxième:
2.301491] usb 4-2: Manufacturer: CHICONY
[ 19.794467] Adding 8846332k swap on /dev/sda1. Priority:-1 extents:1 across:8846332k Contrôle si tout les UUID de ta swap coïncident dans fstab, blkid et /etc/initramfs-tools/conf.d/resume. Regarde ici au #4:
http://forum.ubuntu-fr.org/viewtopic.php?id=448236
Puis toujours le deuxième:
29.539814] vboxdrv: Found 2 processor cores.
[ 29.540256] vboxdrv: fAsync=0 offMin=0x1ab offMax=0x6e7
[ 29.540463] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 29.540465] vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004).
[ 29.566734] vboxpci: IOMMU not found (not registered)
[ 80.434904] WARNING! power/level is deprecated; use power/control insteadC'est quoi ce vbox?
#7 Le 29/07/2013, à 12:22
- nam1962
Re : Xubuntu 13.04 boot lent
Uhhh, je suis utilisateur éclairé, mais là vous êtes drôlement plus pointus que moi :
@hibou7, je n'ai pas de SSD, il semble que l'article 2 parle de ça, sinon pas tout compris ce que tu voulais que je fasse.
@fcn50 - pour le primier j'ai un souci non résolu avec le bios : idotement j'ai tout de suite fusillé W8 (au bout de 7 minutes) quand j'ai acheté l'ordi, sans faire la maj du bios, depuis n'ai jamais trouvé comment faire (j'ai un topic là dessus non résolu : http://forum.ubuntu-fr.org/viewtopic.php?id=1255051 ) - j'essaye le truc de l'UUID dans la journée - vbox ne serait pas virtual box ? (installé sur le second)
Merci à tous les deux 
Dernière modification par nam1962 (Le 29/07/2013, à 12:32)
[ Modéré ]
Hors ligne
#8 Le 29/07/2013, à 12:29
- nam1962
Re : Xubuntu 13.04 boot lent
hum....
~$ sudo mkswap /dev/sdb1 -L swap
/dev/sdb1: Aucun fichier ou dossier de ce type
~$ sudo blkid
/dev/sda1: UUID="98EE-FCCB" TYPE="vfat"
/dev/sda2: UUID="2db2e89d-de3e-469b-bf56-425af700378f" TYPE="ext4"
/dev/sda3: UUID="c231cded-ad8c-49e2-91aa-c7c90a01a06b" TYPE="swap"
/dev/sda4: UUID="50ccbf93-2ee8-4a35-922e-c477c206f330" TYPE="ext4"
~$ sudo update-initramfs -u
update-initramfs: Generating /boot/initrd.img-3.8.0-27-generic
~$ sudo update-grub
Création de grub.cfg…
Image Linux trouvée : /boot/vmlinuz-3.8.0-27-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.8.0-27-generic
Adding boot menu entry for EFI firmware configuration
faitPas pigé ce que je dois faire ensuite (c'est la machine 1)
[ Modéré ]
Hors ligne
#9 Le 29/07/2013, à 15:45
- F50
Re : Xubuntu 13.04 boot lent
Je comprend pas ton dernier message et commandes?
fcn50 a écrit :
Contrôle si tous les UUID de ta swap coïncident dans fstab, blkid et /etc/initramfs-tools/conf.d/resume. Regarde ici au #4:
#10 Le 29/07/2013, à 17:25
- nam1962
Re : Xubuntu 13.04 boot lent
Ordi 1 : le etc/fstab est vide.
Dans le /etc/initramfs-tools/conf.d/resume il n'y a que l'UUID du sda3
RESUME=UUID=c231cded-ad8c-49e2-91aa-c7c90a01a06bQue dois je faire avec quelle syntaxe ?
edit, j'ai refait le #4 avec sda3
nouvel UUID :
/dev/sda3: UUID="a1221f12-2f4d-4cae-b33c-56cb696895ce" TYPE="swap" LABEL="swap" L'ai mis dans le /etc/initramfs-tools/conf.d/resume
Fstab toujours vide.
Au reboot (toujours lent): KK ! l'ordi me dit qu'il ne trouve pas UUID=c231cded-ad8c-49e2-91aa-c7c90a01a06b, soit l'ancien UUID
Il doit manquer un truc, non?
Dernière modification par nam1962 (Le 29/07/2013, à 17:38)
[ Modéré ]
Hors ligne
#11 Le 29/07/2013, à 18:33
- F50
Re : Xubuntu 13.04 boot lent
En théorie il devrait aussi être dans ton /fstab, poste son contenu. Il faut absolument que dans fstab, blkid et /etc/initramfs-tools/conf.d/resume ce soit le même UUID pour ta swap, contrôle.
#12 Le 30/07/2013, à 08:10
- nam1962
Re : Xubuntu 13.04 boot lent
/fstab vide !
Quelle syntaxe lui faut il ?
[ Modéré ]
Hors ligne
#13 Le 30/07/2013, à 09:07
- F50
Re : Xubuntu 13.04 boot lent
Tu veux dire complètement vide et comment les autres partitions se montent-elles?
Point 3:
#14 Le 30/07/2013, à 09:31
- Berserker
Re : Xubuntu 13.04 boot lent
nam1962 a écrit :
/fstab vide !
Quelle syntaxe lui faut il ?
Le bon fichier c'est /etc/fstab
Arché et Debianeux gnomiste.
Hors ligne
#15 Le 30/07/2013, à 09:52
- F50
Re : Xubuntu 13.04 boot lent
Berserker a écrit :
Le bon fichier c'est /etc/fstab
#10:
nam1962 a écrit :
Ordi 1 : le etc/fstab est vide.
#16 Le 30/07/2013, à 12:21
- nam1962
Re : Xubuntu 13.04 boot lent
Je suis une moule !
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=2db2e89d-de3e-469b-bf56-425af700378f / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
#UUID=98EE-FCCB /boot/efi vfat defaults 0 1
# /home was on /dev/sda4 during installation
UUID=50ccbf93-2ee8-4a35-922e-c477c206f330 /home ext4 defaults 0 2
# swap was on /dev/sda3 during installation
UUID=c231cded-ad8c-49e2-91aa-c7c90a01a06b none swap sw 0 0
# Move /tmp to RAM
# tmpfs /tmp tmpfs defaults,noexec,nosuid 0 0
UUID=98EE-FCCB /boot/efi vfat defaults 0 1Bon, là, je fais quoi pour être moins stupide (ça a l'air le bazar, mais je n'ose pas toucher)
Tant que mon terminal est ouvert :
$ blkid
/dev/sda1: UUID="98EE-FCCB" TYPE="vfat"
/dev/sda2: UUID="2db2e89d-de3e-469b-bf56-425af700378f" TYPE="ext4"
/dev/sda3: LABEL="swap" UUID="a1221f12-2f4d-4cae-b33c-56cb696895ce" TYPE="swap"
/dev/sda4: UUID="50ccbf93-2ee8-4a35-922e-c477c206f330" TYPE="ext4Dernière modification par nam1962 (Le 30/07/2013, à 12:24)
[ Modéré ]
Hors ligne
#17 Le 30/07/2013, à 12:41
- F50
Re : Xubuntu 13.04 boot lent
Una moule bouchée pas bouchot 
Tu remplaces dans fstab le:
c231cded-ad8c-49e2-91aa-c7c90a01a06bPar celui du blkid:
a1221f12-2f4d-4cae-b33c-56cb696895ceEt contrôle que ce soit aussi le même dans /etc/initramfs-tools/conf.d/resume
Dernière modification par fcn50 (Le 30/07/2013, à 12:43)
#18 Le 30/07/2013, à 13:18
- nam1962
Re : Xubuntu 13.04 boot lent
Merssii !
Bon, c'est fait, mais ça n'a pas bouleversifié le temps de boot, même si il y a de l'amélio (machine 1) :
P 00040000)
[ 0.000000] ACPI: FPDT 000000009afde000 00044 (v01 HPQOEM 18A4 00000001 HP 00040000)
[ 0.000000] ACPI: MSDM 000000009afdd000 00055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 000000009afdc000 009AA (v01 HPQOEM 18A4 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afdb000 00A92 (v01 HPQOEM 18A4 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afd7000 01F1F (v01 HPQOEM 18A4 00001000 ACPI 00040000)
[ 0.000000] ACPI: UEFI 000000009afda000 0005C (v01 HPQOEM 18A4 00000000 HP 00040000)
[ 0.000000] ACPI: BGRT 000000009afd9000 00038 (v01 HPQOEM 18A4 00000001 HP 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001df5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1df5fffff]
[ 0.000000] NODE_DATA [mem 0x1df5fb000-0x1df5fffff]
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff8801d8c00000-ffff8801debfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1df5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0x90cc0fff]
[ 0.000000] node 0: [mem 0x91a42000-0x9a4befff]
[ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
[ 0.000000] node 0: [mem 0x100000000-0x1df5fffff]
[ 0.000000] On node 0 totalpages: 1542327
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 120 pages reserved
[ 0.000000] DMA zone: 3776 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9741 pages used for memmap
[ 0.000000] DMA32 zone: 613682 pages, LIFO batch:31
[ 0.000000] Normal zone: 14296 pages used for memmap
[ 0.000000] Normal zone: 900648 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000088000 - 00000000000c0000
[ 0.000000] PM: Registered nosave memory: 00000000000c0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 0000000090cc1000 - 0000000091a42000
[ 0.000000] PM: Registered nosave memory: 000000009a4bf000 - 000000009aebf000
[ 0.000000] PM: Registered nosave memory: 000000009aebf000 - 000000009afbf000
[ 0.000000] PM: Registered nosave memory: 000000009afbf000 - 000000009afff000
[ 0.000000] PM: Registered nosave memory: 000000009b000000 - 000000009fa00000
[ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb80000
[ 0.000000] PM: Registered nosave memory: 00000000ffb80000 - 0000000100000000
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801df200000 s85056 r8192 d21440 u262144
[ 0.000000] pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1518106
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-28-generic root=UUID=2db2e89d-de3e-469b-bf56-425af700378f ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5919368k/7854080k available (7013k kernel code, 1684772k absent, 249940k reserved, 6229k data, 996k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 25165824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2394.570 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.14 BogoMIPS (lpj=9578280)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.036960] Security Framework initialized
[ 0.036969] AppArmor: AppArmor initialized
[ 0.036969] Yama: becoming mindful.
[ 0.037482] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.039094] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.039791] Mount-cache hash table entries: 256
[ 0.039945] Initializing cgroup subsys cpuacct
[ 0.039947] Initializing cgroup subsys memory
[ 0.039953] Initializing cgroup subsys devices
[ 0.039954] Initializing cgroup subsys freezer
[ 0.039955] Initializing cgroup subsys blkio
[ 0.039956] Initializing cgroup subsys perf_event
[ 0.039959] Initializing cgroup subsys hugetlb
[ 0.039980] CPU: Physical Processor ID: 0
[ 0.039981] CPU: Processor Core ID: 0
[ 0.039985] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.039985] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.039988] mce: CPU supports 7 MCE banks
[ 0.039999] CPU0: Thermal monitoring enabled (TM1)
[ 0.040005] process: using mwait in idle threads
[ 0.040008] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.040008] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.040008] tlb_flushall_shift: 5
[ 0.040146] Freeing SMP alternatives: 24k freed
[ 0.042672] ACPI: Core revision 20121018
[ 0.064119] ftrace: allocating 26712 entries in 105 pages
[ 0.078078] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.117705] smpboot: CPU0: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
[ 0.117714] TSC deadline timer enabled
[ 0.117718] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.117725] ... version: 3
[ 0.117726] ... bit width: 48
[ 0.117727] ... generic registers: 4
[ 0.117728] ... value mask: 0000ffffffffffff
[ 0.117729] ... max period: 000000007fffffff
[ 0.117730] ... fixed-purpose events: 3
[ 0.117731] ... event mask: 000000070000000f
[ 0.131886] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.118690] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.158283] Brought up 4 CPUs
[ 0.158286] smpboot: Total of 4 processors activated (19156.56 BogoMIPS)
[ 0.161524] devtmpfs: initialized
[ 0.162376] EVM: security.selinux
[ 0.162377] EVM: security.SMACK64
[ 0.162378] EVM: security.capability
[ 0.162421] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[ 0.163126] regulator-dummy: no parameters
[ 0.163167] NET: Registered protocol family 16
[ 0.163293] ACPI: bus type pci registered
[ 0.163356] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.163359] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.188499] PCI: Using configuration type 1 for base access
[ 0.189286] bio: create slab <bio-0> at 0
[ 0.189360] ACPI: Added _OSI(Module Device)
[ 0.189362] ACPI: Added _OSI(Processor Device)
[ 0.189363] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.189366] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.191249] ACPI: EC: Look up EC in DSDT
[ 0.193451] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.197165] ACPI: SSDT 000000009ae19018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
[ 0.197645] ACPI: Dynamic OEM Table Load:
[ 0.197647] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
[ 0.209547] ACPI: SSDT 000000009ae5ba98 00303 (v01 PmRef ApIst 00003000 INTL 20111123)
[ 0.210043] ACPI: Dynamic OEM Table Load:
[ 0.210045] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20111123)
[ 0.210170] ACPI: SSDT 000000009ae18d98 00119 (v01 PmRef ApCst 00003000 INTL 20111123)
[ 0.210643] ACPI: Dynamic OEM Table Load:
[ 0.210646] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20111123)
[ 0.211495] ACPI: Interpreter enabled
[ 0.211499] ACPI: (supports S0 S3 S4 S5)
[ 0.211518] ACPI: Using IOAPIC for interrupt routing
[ 0.336647] ACPI: Power Resource [FN00] (off)
[ 0.336732] ACPI: Power Resource [FN01] (off)
[ 0.336814] ACPI: Power Resource [FN02] (off)
[ 0.336897] ACPI: Power Resource [FN03] (off)
[ 0.336979] ACPI: Power Resource [FN04] (off)
[ 0.337315] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.337638] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.337641] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.337785] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.337787] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.337931] \_SB_.PCI0:_OSC invalid UUID
[ 0.337932] _OSC request data:1 8 0
[ 0.338212] PCI host bridge to bus 0000:00
[ 0.338215] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.338218] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.338220] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.338222] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.338224] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.338226] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.338227] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.338229] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.338231] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.338232] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.338234] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.338236] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.338237] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.338239] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.338241] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.338243] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.338244] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.338246] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 0.338254] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.338292] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.338324] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.338343] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.338354] pci 0000:00:02.0: reg 10: [mem 0xc1000000-0xc13fffff 64bit]
[ 0.338360] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.338364] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 0.338416] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.338439] pci 0000:00:14.0: reg 10: [mem 0xc1700000-0xc170ffff 64bit]
[ 0.338513] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.338538] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.338561] pci 0000:00:16.0: reg 10: [mem 0xc1714000-0xc171400f 64bit]
[ 0.338640] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.338675] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.338698] pci 0000:00:1a.0: reg 10: [mem 0xc1719000-0xc17193ff]
[ 0.338790] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.338818] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.338834] pci 0000:00:1b.0: reg 10: [mem 0xc1710000-0xc1713fff 64bit]
[ 0.338903] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.338927] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.339007] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.339033] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.339113] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.339150] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.339172] pci 0000:00:1d.0: reg 10: [mem 0xc1718000-0xc17183ff]
[ 0.339264] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.339292] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.339419] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 0.339439] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
[ 0.339447] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
[ 0.339456] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
[ 0.339464] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
[ 0.339472] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 0.339481] pci 0000:00:1f.2: reg 24: [mem 0xc1717000-0xc17177ff]
[ 0.339528] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.339548] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.339564] pci 0000:00:1f.3: reg 10: [mem 0xc1715000-0xc17150ff 64bit]
[ 0.339586] pci 0000:00:1f.3: reg 20: [io 0x4040-0x405f]
[ 0.339645] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[ 0.339658] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.339667] pci 0000:01:00.0: reg 18: [mem 0xc0000000-0xc001ffff 64bit]
[ 0.339674] pci 0000:01:00.0: reg 20: [io 0x3000-0x30ff]
[ 0.339686] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.339716] pci 0000:01:00.0: supports D1 D2
[ 0.346149] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.346157] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.346165] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc0ffffff]
[ 0.346174] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.346295] pci 0000:07:00.0: [10ec:5289] type 00 class 0xff0000
[ 0.346316] pci 0000:07:00.0: reg 10: [mem 0xc1600000-0xc160ffff]
[ 0.346474] pci 0000:07:00.0: supports D1 D2
[ 0.346475] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.346538] pci 0000:07:00.2: [10ec:8168] type 00 class 0x020000
[ 0.346558] pci 0000:07:00.2: reg 10: [io 0x2000-0x20ff]
[ 0.346593] pci 0000:07:00.2: reg 18: [mem 0xc1404000-0xc1404fff 64bit pref]
[ 0.346615] pci 0000:07:00.2: reg 20: [mem 0xc1400000-0xc1403fff 64bit pref]
[ 0.346709] pci 0000:07:00.2: supports D1 D2
[ 0.346711] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.354164] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.354175] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.354184] pci 0000:00:1c.0: bridge window [mem 0xc1600000-0xc16fffff]
[ 0.354199] pci 0000:00:1c.0: bridge window [mem 0xc1400000-0xc14fffff 64bit pref]
[ 0.354316] pci 0000:08:00.0: [1814:3290] type 00 class 0x028000
[ 0.354336] pci 0000:08:00.0: reg 10: [mem 0xc1510000-0xc151ffff]
[ 0.354478] pci 0000:08:00.0: PME# supported from D0 D3hot
[ 0.354528] pci 0000:08:00.1: [1814:3298] type 00 class 0x0d1100
[ 0.354548] pci 0000:08:00.1: reg 10: [mem 0xc1500000-0xc150ffff]
[ 0.354689] pci 0000:08:00.1: supports D1
[ 0.354691] pci 0000:08:00.1: PME# supported from D0 D1 D3hot
[ 0.370169] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.370184] pci 0000:00:1c.1: bridge window [mem 0xc1500000-0xc15fffff]
[ 0.370261] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.370291] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.370332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.370417] \_SB_.PCI0:_OSC invalid UUID
[ 0.370418] _OSC request data:1 1f 0
[ 0.370421] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.370422] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.371003] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.371044] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.371083] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.371124] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.371163] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.371202] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.371240] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.371280] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.371370] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.371375] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.371376] vgaarb: loaded
[ 0.371377] vgaarb: bridge control possible 0000:01:00.0
[ 0.371379] vgaarb: no bridge control possible 0000:00:02.0
[ 0.371517] SCSI subsystem initialized
[ 0.371519] ACPI: bus type scsi registered
[ 0.371560] libata version 3.00 loaded.
[ 0.371573] ACPI: bus type usb registered
[ 0.371589] usbcore: registered new interface driver usbfs
[ 0.371595] usbcore: registered new interface driver hub
[ 0.371613] usbcore: registered new device driver usb
[ 0.371680] PCI: Using ACPI for IRQ routing
[ 0.378300] PCI: pci_cache_line_size set to 64 bytes
[ 0.378374] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.378376] e820: reserve RAM buffer [mem 0x90cc1000-0x93ffffff]
[ 0.378378] e820: reserve RAM buffer [mem 0x9a4bf000-0x9bffffff]
[ 0.378379] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 0.378381] e820: reserve RAM buffer [mem 0x1df600000-0x1dfffffff]
[ 0.378455] NetLabel: Initializing
[ 0.378456] NetLabel: domain hash size = 128
[ 0.378457] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.378466] NetLabel: unlabeled traffic allowed by default
[ 0.378517] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.378522] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.381531] Switching to clocksource hpet
[ 0.386070] AppArmor: AppArmor Filesystem Enabled
[ 0.386093] pnp: PnP ACPI init
[ 0.386105] ACPI: bus type pnp registered
[ 0.386138] pnp 00:00: [dma 4]
[ 0.386157] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.386174] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.386268] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.386295] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.386333] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.386335] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.386337] system 00:04: [io 0xffff] has been reserved
[ 0.386339] system 00:04: [io 0xffff] has been reserved
[ 0.386341] system 00:04: [io 0x0400-0x0453] has been reserved
[ 0.386343] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.386345] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.386347] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.386350] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.386371] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.386409] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.386412] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.386444] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 0.386469] pnp 00:08: Plug and Play ACPI device, IDs SYN1e76 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.445627] pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.445734] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.445736] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.445738] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.445740] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.445742] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.445744] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.445746] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.445748] system 00:0a: [mem 0xff000000-0xff000fff] has been reserved
[ 0.445750] system 00:0a: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.445752] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.445754] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 0.445756] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.446107] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[ 0.446110] system 00:0b: [mem 0x40000000-0x401fffff] has been reserved
[ 0.446112] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.446197] pnp: PnP ACPI: found 12 devices
[ 0.446199] ACPI: ACPI bus type pnp unregistered
[ 0.452370] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.452400] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0020000-0xc003ffff pref]
[ 0.452403] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.452405] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.452408] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc0ffffff]
[ 0.452411] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.452415] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.452418] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.452424] pci 0000:00:1c.0: bridge window [mem 0xc1600000-0xc16fffff]
[ 0.452428] pci 0000:00:1c.0: bridge window [mem 0xc1400000-0xc14fffff 64bit pref]
[ 0.452435] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.452440] pci 0000:00:1c.1: bridge window [mem 0xc1500000-0xc15fffff]
[ 0.452471] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.452473] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.452475] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.452476] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.452478] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.452480] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.452482] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.452483] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.452485] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.452487] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.452488] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.452490] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.452492] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.452493] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.452495] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.452497] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.452498] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff]
[ 0.452500] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.452502] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc0ffffff]
[ 0.452504] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.452506] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
[ 0.452507] pci_bus 0000:07: resource 1 [mem 0xc1600000-0xc16fffff]
[ 0.452509] pci_bus 0000:07: resource 2 [mem 0xc1400000-0xc14fffff 64bit pref]
[ 0.452511] pci_bus 0000:08: resource 1 [mem 0xc1500000-0xc15fffff]
[ 0.452538] NET: Registered protocol family 2
[ 0.452700] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.452899] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.453026] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.453049] TCP: reno registered
[ 0.453062] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.453092] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.453165] NET: Registered protocol family 1
[ 0.453179] pci 0000:00:02.0: Boot video device
[ 0.485469] PCI: CLS 64 bytes, default 64
[ 0.485541] Trying to unpack rootfs image as initramfs...
[ 0.730808] Freeing initrd memory: 15876k freed
[ 0.732746] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.732752] software IO TLB [mem 0x92cc2000-0x96cc2000] (64MB) mapped at [ffff880092cc2000-ffff880096cc1fff]
[ 0.732788] Simple Boot Flag at 0x44 set to 0x1
[ 0.733149] Initialise module verification
[ 0.733194] audit: initializing netlink socket (disabled)
[ 0.733207] type=2000 audit(1375182839.716:1): initialized
[ 0.759275] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.760476] VFS: Disk quotas dquot_6.5.2
[ 0.760512] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.760890] fuse init (API version 7.20)
[ 0.760947] msgmni has been set to 11694
[ 0.761323] Key type asymmetric registered
[ 0.761326] Asymmetric key parser 'x509' registered
[ 0.761352] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.761376] io scheduler noop registered
[ 0.761379] io scheduler deadline registered (default)
[ 0.761384] io scheduler cfq registered
[ 0.761475] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.761596] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.761607] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.761651] efifb: probing for efifb
[ 0.762151] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90021480000, using 4160k, total 4160k
[ 0.762153] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.762154] efifb: scrolling: redraw
[ 0.762155] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.765168] Console: switching to colour frame buffer device 170x48
[ 0.767995] fb0: EFI VGA frame buffer device
[ 0.768000] intel_idle: MWAIT substates: 0x21120
[ 0.768001] intel_idle: v0.4 model 0x2A
[ 0.768002] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.768086] ACPI: AC Adapter [ACAD] (on-line)
[ 0.768177] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[ 0.768181] ACPI: Power Button [PWRB]
[ 0.768217] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.768292] ACPI: Lid Switch [LID0]
[ 0.768319] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.768322] ACPI: Power Button [PWRF]
[ 0.768366] ACPI: Fan [FAN0] (off)
[ 0.768386] ACPI: Fan [FAN1] (off)
[ 0.768405] ACPI: Fan [FAN2] (off)
[ 0.768424] ACPI: Fan [FAN3] (off)
[ 0.768445] ACPI: Fan [FAN4] (off)
[ 0.768492] ACPI: Requesting acpi_cpufreq
[ 0.890362] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.890364] ACPI: Thermal Zone [TZ00] (61 C)
[ 0.890584] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.890586] ACPI: Thermal Zone [TZ01] (61 C)
[ 0.890634] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.890636] ACPI: Thermal Zone [TZ02] (28 C)
[ 0.890665] GHES: HEST is not enabled!
[ 0.890726] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.092546] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 1.092625] ACPI: Battery Slot [BAT1] (battery present)
[ 1.092711] Linux agpgart interface v0.103
[ 1.093707] brd: module loaded
[ 1.094198] loop: module loaded
[ 1.094446] libphy: Fixed MDIO Bus: probed
[ 1.094491] tun: Universal TUN/TAP device driver, 1.6
[ 1.094492] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.094524] PPP generic driver version 2.4.2
[ 1.094559] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.094560] ehci-pci: EHCI PCI platform driver
[ 1.094596] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 1.094600] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.094605] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.094619] ehci-pci 0000:00:1a.0: debug port 2
[ 1.098518] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.098534] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc1719000
[ 1.108486] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.108532] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.108538] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.108543] usb usb1: Product: EHCI Host Controller
[ 1.108548] usb usb1: Manufacturer: Linux 3.8.0-28-generic ehci_hcd
[ 1.108553] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.108666] hub 1-0:1.0: USB hub found
[ 1.108670] hub 1-0:1.0: 2 ports detected
[ 1.108749] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 1.108752] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.108757] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.108769] ehci-pci 0000:00:1d.0: debug port 2
[ 1.112657] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.112669] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc1718000
[ 1.124467] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.124503] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.124509] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.124514] usb usb2: Product: EHCI Host Controller
[ 1.124519] usb usb2: Manufacturer: Linux 3.8.0-28-generic ehci_hcd
[ 1.124524] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.124620] hub 2-0:1.0: USB hub found
[ 1.124623] hub 2-0:1.0: 2 ports detected
[ 1.124681] ehci-platform: EHCI generic platform driver
[ 1.124687] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.124697] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.124735] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.124739] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.124742] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.124828] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.124872] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[ 1.124914] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.124916] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.124917] usb usb3: Product: xHCI Host Controller
[ 1.124919] usb usb3: Manufacturer: Linux 3.8.0-28-generic xhci_hcd
[ 1.124921] usb usb3: SerialNumber: 0000:00:14.0
[ 1.124975] xHCI xhci_add_endpoint called for root hub
[ 1.124977] xHCI xhci_check_bandwidth called for root hub
[ 1.124991] hub 3-0:1.0: USB hub found
[ 1.124998] hub 3-0:1.0: 4 ports detected
[ 1.125261] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.125264] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.125283] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.125285] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.125286] usb usb4: Product: xHCI Host Controller
[ 1.125288] usb usb4: Manufacturer: Linux 3.8.0-28-generic xhci_hcd
[ 1.125290] usb usb4: SerialNumber: 0000:00:14.0
[ 1.125336] xHCI xhci_add_endpoint called for root hub
[ 1.125337] xHCI xhci_check_bandwidth called for root hub
[ 1.125351] hub 4-0:1.0: USB hub found
[ 1.125358] hub 4-0:1.0: 4 ports detected
[ 1.125678] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.161438] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.161443] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.161529] mousedev: PS/2 mouse device common for all mice
[ 1.163949] rtc_cmos 00:05: RTC can wake from S4
[ 1.164066] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.164094] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.164162] device-mapper: uevent: version 1.0.3
[ 1.164212] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 1.164278] cpuidle: using governor ladder
[ 1.164356] cpuidle: using governor menu
[ 1.164360] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.164362] EFI Variables Facility v0.08 2004-May-17
[ 1.177445] ashmem: initialized
[ 1.177545] TCP: cubic registered
[ 1.177620] NET: Registered protocol family 10
[ 1.177755] NET: Registered protocol family 17
[ 1.177766] Key type dns_resolver registered
[ 1.177964] Loading module verification certificates
[ 1.178834] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 5707af7d8c3f1f0a9542b007a5f82b965f14fbd3'
[ 1.178847] registered taskstats version 1
[ 1.181036] Key type trusted registered
[ 1.182694] Key type encrypted registered
[ 1.184732] rtc_cmos 00:05: setting system clock to 2013-07-30 11:14:01 UTC (1375182841)
[ 1.185360] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.185361] EDD information not available.
[ 1.186773] Freeing unused kernel memory: 996k freed
[ 1.186892] Write protecting the kernel read-only data: 12288k
[ 1.189901] Freeing unused kernel memory: 1168k freed
[ 1.192673] Freeing unused kernel memory: 1076k freed
[ 1.201936] udevd[108]: starting version 175
[ 1.203927] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.208016] Disabling lock debugging due to kernel taint
[ 1.208343] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[ 1.208388] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[ 1.208422] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[ 1.208457] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[ 1.208571] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.235541] rtsx_pci 0000:07:00.0: irq 42 for MSI/MSI-X
[ 1.235556] rtsx_pci 0000:07:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
[ 1.239721] ahci 0000:00:1f.2: version 3.0
[ 1.239793] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.239801] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.240032] r8169 0000:07:00.2: irq 44 for MSI/MSI-X
[ 1.240231] r8169 0000:07:00.2 eth0: RTL8411 at 0xffffc90000076000, 84:34:97:14:24:7b, XID 08800800 IRQ 44
[ 1.240235] r8169 0000:07:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.252298] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl RAID mode
[ 1.252304] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.252312] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.272041] scsi0 : ahci
[ 1.272311] scsi1 : ahci
[ 1.272801] scsi2 : ahci
[ 1.272896] scsi3 : ahci
[ 1.272982] scsi4 : ahci
[ 1.273069] scsi5 : ahci
[ 1.273148] ata1: SATA max UDMA/133 abar m2048@0xc1717000 port 0xc1717100 irq 43
[ 1.273153] ata2: SATA max UDMA/133 abar m2048@0xc1717000 port 0xc1717180 irq 43
[ 1.273157] ata3: SATA max UDMA/133 abar m2048@0xc1717000 port 0xc1717200 irq 43
[ 1.273159] ata4: DUMMY
[ 1.273161] ata5: DUMMY
[ 1.273163] ata6: DUMMY
[ 1.420116] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.552346] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.552358] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.552700] hub 1-1:1.0: USB hub found
[ 1.552775] hub 1-1:1.0: 6 ports detected
[ 1.553098] ACPI Warning: For \_SB_.PCI0.EHC2.HUBN.PR01.PR11._PLD: Return Package has no elements (empty) (20121018/nspredef-463)
[ 1.591844] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.593850] ata3.00: ATAPI: hp DVD RAM UJ8C2, 1.00, max UDMA/133
[ 1.596481] ata3.00: configured for UDMA/133
[ 1.599833] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.599887] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.601541] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100
[ 1.601552] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.603358] ata1.00: configured for UDMA/100
[ 1.603601] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54757 JE4O PQ: 0 ANSI: 5
[ 1.603753] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.603758] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.603765] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.603824] sd 0:0:0:0: [sda] Write Protect is off
[ 1.603828] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.603869] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.605307] scsi 2:0:0:0: CD-ROM hp DVD RAM UJ8C2 1.00 PQ: 0 ANSI: 5
[ 1.608409] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.608417] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.608554] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.608706] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.645377] sda: sda1 sda2 sda3 sda4
[ 1.646234] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.663699] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.727581] tsc: Refined TSC clocksource calibration: 2394.560 MHz
[ 1.727594] Switching to clocksource tsc
[ 1.795812] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.795822] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.796073] hub 2-1:1.0: USB hub found
[ 1.796171] hub 2-1:1.0: 8 ports detected
[ 1.963226] usb 3-4: new full-speed USB device number 2 using xhci_hcd
[ 1.980777] usb 3-4: New USB device found, idVendor=138a, idProduct=0018
[ 1.980788] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 1.980794] usb 3-4: SerialNumber: 47163a54f0d0
[ 2.051222] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 2.200566] usb 1-1.1: New USB device found, idVendor=064e, idProduct=c33c
[ 2.200576] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.200582] usb 1-1.1: Product: HP Truevision HD
[ 2.200587] usb 1-1.1: Manufacturer: SuYin
[ 2.200592] usb 1-1.1: SerialNumber: HF1019-P62A-OV03-REV0201
[ 2.258849] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.342749] usb 1-1.2: new low-speed USB device number 4 using ehci-pci
[ 2.440581] usb 1-1.2: New USB device found, idVendor=045e, idProduct=00a4
[ 2.440591] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.440597] usb 1-1.2: Product: Microsoft(R) Compact Optical Mouse
[ 2.440602] usb 1-1.2: Manufacturer: Microsoft
[ 5.685811] ACPI Error: No handler for Region [RCM0] (ffff8801d60dcb40) [SystemCMOS] (20121018/evregion-376)
[ 5.685818] ACPI Error: Region SystemCMOS (ID=5) has no handler (20121018/exfldio-305)
[ 5.685822] ACPI Error: Method parse/execution failed [\_SB_.WMID.ESDT] (Node ffff8801d60cfb18), AE_NOT_EXIST (20121018/psparse-537)
[ 5.685829] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q42] (Node ffff8801d60f74d8), AE_NOT_EXIST (20121018/psparse-537)
[ 24.298492] Adding 17577980k swap on /dev/sda3. Priority:-1 extents:1 across:17577980k
[ 24.331789] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.456513] udevd[386]: starting version 175
[ 24.891508] type=1400 audit(1375182865.238:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=734 comm="apparmor_parser"
[ 24.891522] type=1400 audit(1375182865.238:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=735 comm="apparmor_parser"
[ 24.891857] type=1400 audit(1375182865.238:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=734 comm="apparmor_parser"
[ 24.891871] type=1400 audit(1375182865.238:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=735 comm="apparmor_parser"
[ 24.892048] type=1400 audit(1375182865.238:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=734 comm="apparmor_parser"
[ 24.892064] type=1400 audit(1375182865.238:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=735 comm="apparmor_parser"
[ 25.049105] wmi: Mapper loaded
[ 25.053682] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[ 25.053691] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 25.053697] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIX 1 (20121018/utaddress-251)
[ 25.053702] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20121018/utaddress-251)
[ 25.053707] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 3 (20121018/utaddress-251)
[ 25.053712] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 25.053714] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIX 1 (20121018/utaddress-251)
[ 25.053719] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20121018/utaddress-251)
[ 25.053724] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 3 (20121018/utaddress-251)
[ 25.053728] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 25.053730] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 25.105627] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 25.144749] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 25.175088] hp_accel: laptop model unknown, using default axes configuration
[ 25.175270] lis3lv02d: unknown sensor type 0x0
[ 25.175313] hp_accel: probe of HPQ0004:00 failed with error -22
[ 25.196205] lp: driver loaded but no devices found
[ 25.306017] cfg80211: Calling CRDA to update world regulatory domain
[ 25.315840] mei 0000:00:16.0: setting latency timer to 64
[ 25.315899] mei 0000:00:16.0: irq 45 for MSI/MSI-X
[ 25.343468] [drm] Initialized drm 1.1.0 20060810
[ 25.393449] cfg80211: World regulatory domain updated:
[ 25.393452] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 25.393454] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.393456] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 25.393457] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 25.393458] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.393460] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.506869] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 25.508418] input: HP WMI hotkeys as /devices/virtual/input/input4
[ 25.597500] [drm] Memory usable by graphics device = 2048M
[ 25.597507] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[ 25.597509] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 25.597542] Console: switching to colour dummy device 80x25
[ 25.597633] i915 0000:00:02.0: setting latency timer to 64
[ 25.631479] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 25.631488] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 25.631490] [drm] Driver supports precise vblank timestamp query.
[ 25.631565] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 25.631567] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 25.733985] [drm] radeon defaulting to kernel modesetting.
[ 25.733989] [drm] radeon kernel modesetting enabled.
[ 25.734001] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 25.734037] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[ 25.851594] fbcon: inteldrmfb (fb0) is primary device
[ 25.854307] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 26.416798] Linux video capture interface: v2.00
[ 26.447285] usbcore: registered new interface driver usbhid
[ 26.447286] usbhid: USB HID core driver
[ 26.482699] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
[ 26.484004] hid-generic 0003:045E:00A4.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[ 26.570700] Console: switching to colour frame buffer device 170x48
[ 26.573617] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 26.573619] i915 0000:00:02.0: registered panic notifier
[ 26.573791] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 26.575090] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff880198936a20 (20121018/exresop-422)
[ 26.575096] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20121018/dswexec-460)
[ 26.575100] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.DD02._BCM] (Node ffff8801d60db7d0), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 26.575105] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCM] (Node ffff8801d6113c08), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 26.575111] ACPI Error: Evaluating _BCM failed (20121018/video-372)
[ 26.575242] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 26.575292] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:37/LNXVIDEO:00/input/input6
[ 26.575362] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 26.576378] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff880198936708 (20121018/exresop-422)
[ 26.576382] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20121018/dswexec-460)
[ 26.576386] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.DD02._BCM] (Node ffff8801d60db7d0), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 26.576391] ACPI Error: Evaluating _BCM failed (20121018/video-372)
[ 26.576523] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 26.576563] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input7
[ 26.579071] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 26.579202] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 26.579365] [drm] initializing kernel modesetting (TURKS 0x1002:0x6840 0x103C:0x18A5).
[ 26.579404] [drm] register mmio base: 0xC0000000
[ 26.579406] [drm] register mmio size: 131072
[ 26.579408] vga_switcheroo: enabled
[ 26.579548] ATPX version 1
[ 26.585336] uvcvideo: Found UVC 1.00 device HP Truevision HD (064e:c33c)
[ 26.594633] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input8
[ 26.594721] usbcore: registered new interface driver uvcvideo
[ 26.594723] USB Video Class driver (1.1.1)
[ 26.671098] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 26.671196] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 26.671276] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 26.672686] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x26c00, board id: 2054, fw id: 1196324
[ 26.794937] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 26.851321] ATOM BIOS: HP/Compal
[ 26.851342] [drm] GPU not posted. posting now...
[ 26.854181] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 26.854184] radeon 0000:01:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 26.856299] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 26.856302] [drm] RAM width 128bits DDR
[ 26.856356] [TTM] Zone kernel: Available graphics memory: 2995514 kiB
[ 26.856358] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 26.856359] [TTM] Initializing pool allocator
[ 26.856362] [TTM] Initializing DMA pool allocator
[ 26.856384] [drm] radeon: 2048M of VRAM memory ready
[ 26.856386] [drm] radeon: 512M of GTT memory ready.
[ 26.856399] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 26.856803] [drm] probing gen 2 caps for device 8086:101 = 2/0
[ 26.856807] [drm] PCIE gen 2 link speeds already enabled
[ 26.856855] [drm] Loading TURKS Microcode
[ 27.226262] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 27.226385] radeon 0000:01:00.0: WB enabled
[ 27.226389] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8801935bcc00
[ 27.226391] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8801935bcc0c
[ 27.226393] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 27.226394] [drm] Driver supports precise vblank timestamp query.
[ 27.226425] radeon 0000:01:00.0: irq 48 for MSI/MSI-X
[ 27.226436] radeon 0000:01:00.0: radeon: using MSI.
[ 27.226469] [drm] radeon: irq initialized.
[ 27.242816] [drm] ring test on 0 succeeded in 1 usecs
[ 27.242875] [drm] ring test on 3 succeeded in 1 usecs
[ 27.243109] [drm] ib test on ring 0 succeeded in 0 usecs
[ 27.243158] [drm] ib test on ring 3 succeeded in 0 usecs
[ 27.243405] [drm] Radeon Display Connectors
[ 27.249751] [drm] Internal thermal controller with fan control
[ 27.250585] [drm] radeon: power management initialized
[ 27.250739] radeon 0000:01:00.0: No connectors reported connected with modes
[ 27.250741] [drm] Cannot find any crtc or sizes - going 1024x768
[ 27.251704] [drm] fb mappable at 0xA0142000
[ 27.251705] [drm] vram apper at 0xA0000000
[ 27.251706] [drm] size 3145728
[ 27.251707] [drm] fb depth is 24
[ 27.251708] [drm] pitch is 4096
[ 27.251788] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[ 27.251804] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 1
[ 27.740450] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 27.784972] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 28.251792] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 30.455229] init: failsafe main process (1127) killed by TERM signal
[ 30.588409] type=1400 audit(1375182870.942:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1242 comm="apparmor_parser"
[ 30.588756] type=1400 audit(1375182870.946:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=1245 comm="apparmor_parser"
[ 30.588849] type=1400 audit(1375182870.946:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1241 comm="apparmor_parser"
[ 30.588873] type=1400 audit(1375182870.946:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1242 comm="apparmor_parser"
[ 30.589110] type=1400 audit(1375182870.946:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1242 comm="apparmor_parser"
[ 30.589175] type=1400 audit(1375182870.946:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1241 comm="apparmor_parser"
[ 30.591583] type=1400 audit(1375182870.946:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1248 comm="apparmor_parser"
[ 30.592674] type=1400 audit(1375182870.950:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1246 comm="apparmor_parser"
[ 30.593163] type=1400 audit(1375182870.950:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1246 comm="apparmor_parser"
[ 30.596717] type=1400 audit(1375182870.954:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1243 comm="apparmor_parser"
[ 30.706642] Bluetooth: Core ver 2.16
[ 30.706659] NET: Registered protocol family 31
[ 30.706661] Bluetooth: HCI device and connection manager initialized
[ 30.706669] Bluetooth: HCI socket layer initialized
[ 30.706673] Bluetooth: L2CAP socket layer initialized
[ 30.706679] Bluetooth: SCO socket layer initialized
[ 30.747883] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 30.747887] Bluetooth: BNEP filters: protocol multicast
[ 30.747894] Bluetooth: BNEP socket layer initialized
[ 30.776670] ppdev: user-space parallel port driver
[ 30.784237] Bluetooth: RFCOMM TTY layer initialized
[ 30.784249] Bluetooth: RFCOMM socket layer initialized
[ 30.784251] Bluetooth: RFCOMM ver 1.11
[ 30.828303] init: avahi-cups-reload main process (1276) terminated with status 1
[ 31.250558] r8169 0000:07:00.2 eth0: link down
[ 31.250603] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.250893] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.463647] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 31.463949] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 33.661020] wlan0: authenticate with 00:24:d4:d4:78:b4
[ 33.668108] wlan0: send auth to 00:24:d4:d4:78:b4 (try 1/3)
[ 33.669671] wlan0: authenticated
[ 33.671990] wlan0: associate with 00:24:d4:d4:78:b4 (try 1/3)
[ 33.674786] wlan0: RX AssocResp from 00:24:d4:d4:78:b4 (capab=0x411 status=0 aid=3)
[ 33.675085] wlan0: associated
[ 33.675108] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 34.142219] postgres (1739): /proc/1739/oom_adj is deprecated, please use /proc/1739/oom_score_adj instead.
[ 40.173380] Non-volatile memory driver v1.3
[ 45.087430] radeon: switched off
[ 45.152908] init: plymouth-stop pre-start process (2395) terminated with status 1
[ 51.473139] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.Dernière modification par nam1962 (Le 30/07/2013, à 13:19)
[ Modéré ]
Hors ligne
#19 Le 30/07/2013, à 14:06
- F50
Re : Xubuntu 13.04 boot lent
Regarde du côté du BIOS (ACPI)
[ 5.685811] ACPI Error: No handler for Region [RCM0] (ffff8801d60dcb40) [SystemCMOS] (20121018/evregion-376)
[ 5.685818] ACPI Error: Region SystemCMOS (ID=5) has no handler (20121018/exfldio-305)
[ 5.685822] ACPI Error: Method parse/execution failed [\_SB_.WMID.ESDT] (Node ffff8801d60cfb18), AE_NOT_EXIST (20121018/psparse-537)
[ 5.685829] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q42] (Node ffff8801d60f74d8), AE_NOT_EXIST (20121018/psparse-537)
19s à mouliner:
24.298492] Adding 17577980k swap on /dev/sda3. Priority:-1 extents:1 across:17577980k
#20 Le 30/07/2013, à 19:21
- nam1962
Re : Xubuntu 13.04 boot lent
Comme j'ai dit plus haut, côté BIOS, je suis coincé pour le moment : http://forum.ubuntu-fr.org/viewtopic.php?id=1255051
Je vais voir ce que fait la modif UUID sur la machine 2, sinon.
([edit] Voilà le dmesg de la 2 après procédure #4.
Bof...
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000
[ 0.000000] PM: Registered nosave memory: 00000000cff8e000 - 00000000cffe0000
[ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s85056 r8192 d21440 u524288
[ 0.000000] pcpu-alloc: s85056 r8192 d21440 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031947
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-28-generic root=UUID=60c48e1f-92f1-4862-a539-0aa580db65b4 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4029600k/4980736k available (7013k kernel code, 787396k absent, 163740k reserved, 6229k data, 996k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3172.256 MHz processor
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6344.51 BogoMIPS (lpj=12689024)
[ 0.004006] pid_max: default: 32768 minimum: 301
[ 0.004031] Security Framework initialized
[ 0.004045] AppArmor: AppArmor initialized
[ 0.004046] Yama: becoming mindful.
[ 0.004315] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008910] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009772] Mount-cache hash table entries: 256
[ 0.009951] Initializing cgroup subsys cpuacct
[ 0.009953] Initializing cgroup subsys memory
[ 0.009961] Initializing cgroup subsys devices
[ 0.009963] Initializing cgroup subsys freezer
[ 0.009965] Initializing cgroup subsys blkio
[ 0.009966] Initializing cgroup subsys perf_event
[ 0.009968] Initializing cgroup subsys hugetlb
[ 0.009992] CPU: Physical Processor ID: 0
[ 0.009993] CPU: Processor Core ID: 0
[ 0.009995] mce: CPU supports 6 MCE banks
[ 0.010001] CPU0: Thermal monitoring enabled (TM2)
[ 0.010005] process: using mwait in idle threads
[ 0.010009] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.010009] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.010009] tlb_flushall_shift: -1
[ 0.010095] Freeing SMP alternatives: 24k freed
[ 0.012233] ACPI: Core revision 20121018
[ 0.016008] ftrace: allocating 26712 entries in 105 pages
[ 0.024411] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064903] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz (fam: 06, model: 17, stepping: 06)
[ 0.068000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.068000] ... version: 2
[ 0.068000] ... bit width: 40
[ 0.068000] ... generic registers: 2
[ 0.068000] ... value mask: 000000ffffffffff
[ 0.068000] ... max period: 000000007fffffff
[ 0.068000] ... fixed-purpose events: 3
[ 0.068000] ... event mask: 0000000700000003
[ 0.068000] smpboot: Booting Node 0, Processors #1
[ 0.076023] Brought up 2 CPUs
[ 0.076028] smpboot: Total of 2 processors activated (12689.02 BogoMIPS)
[ 0.076122] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080082] devtmpfs: initialized
[ 0.081177] EVM: security.selinux
[ 0.081178] EVM: security.SMACK64
[ 0.081180] EVM: security.capability
[ 0.081192] PM: Registering ACPI NVS region [mem 0xcff8e000-0xcffdffff] (335872 bytes)
[ 0.081192] regulator-dummy: no parameters
[ 0.081192] NET: Registered protocol family 16
[ 0.081192] ACPI: bus type pci registered
[ 0.081192] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.081192] PCI: not using MMCONFIG
[ 0.081192] PCI: Using configuration type 1 for base access
[ 0.081582] bio: create slab <bio-0> at 0
[ 0.081582] ACPI: Added _OSI(Module Device)
[ 0.081582] ACPI: Added _OSI(Processor Device)
[ 0.081582] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.081582] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.084517] ACPI: EC: Look up EC in DSDT
[ 0.085397] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.088991] ACPI: SSDT 00000000cff8e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.089207] ACPI: Dynamic OEM Table Load:
[ 0.089209] ACPI: SSDT (null) 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.089313] ACPI: SSDT 00000000cff8e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.089528] ACPI: Dynamic OEM Table Load:
[ 0.089530] ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.089635] ACPI: Interpreter enabled
[ 0.089638] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.089650] ACPI: Using IOAPIC for interrupt routing
[ 0.089665] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.089974] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.109582] ACPI: No dock devices found.
[ 0.109585] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.109625] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.109627] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.109760] PCI host bridge to bus 0000:00
[ 0.109763] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.109765] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.109766] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.109768] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.109770] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.109771] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
[ 0.109778] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.109810] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.109838] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.109868] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.109902] pci 0000:00:1a.0: reg 20: [io 0xb800-0xb81f]
[ 0.109942] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.109976] pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f]
[ 0.110016] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.110050] pci 0000:00:1a.2: reg 20: [io 0xbc00-0xbc1f]
[ 0.110097] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.110114] pci 0000:00:1a.7: reg 10: [mem 0xfe7ffc00-0xfe7fffff]
[ 0.110187] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.110208] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.110220] pci 0000:00:1b.0: reg 10: [mem 0xfe7f8000-0xfe7fbfff 64bit]
[ 0.110272] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.110290] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.110343] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.110363] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.110417] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.110434] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.110487] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.110507] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.110540] pci 0000:00:1d.0: reg 20: [io 0xb080-0xb09f]
[ 0.110581] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.110614] pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f]
[ 0.110655] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.110688] pci 0000:00:1d.2: reg 20: [io 0xb480-0xb49f]
[ 0.110736] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.110753] pci 0000:00:1d.7: reg 10: [mem 0xfe7ff800-0xfe7ffbff]
[ 0.110826] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.110843] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.110893] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[ 0.110961] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.111000] pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018f
[ 0.111012] pci 0000:00:1f.2: reg 10: [io 0xa000-0xa007]
[ 0.111018] pci 0000:00:1f.2: reg 14: [io 0x9c00-0x9c03]
[ 0.111024] pci 0000:00:1f.2: reg 18: [io 0x9880-0x9887]
[ 0.111030] pci 0000:00:1f.2: reg 1c: [io 0x9800-0x9803]
[ 0.111037] pci 0000:00:1f.2: reg 20: [io 0x9480-0x948f]
[ 0.111043] pci 0000:00:1f.2: reg 24: [io 0x9400-0x940f]
[ 0.111079] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.111091] pci 0000:00:1f.3: reg 10: [mem 0xfe7ff400-0xfe7ff4ff 64bit]
[ 0.111107] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.111133] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[ 0.111145] pci 0000:00:1f.5: reg 10: [io 0xb000-0xb007]
[ 0.111151] pci 0000:00:1f.5: reg 14: [io 0xac00-0xac03]
[ 0.111157] pci 0000:00:1f.5: reg 18: [io 0xa880-0xa887]
[ 0.111164] pci 0000:00:1f.5: reg 1c: [io 0xa800-0xa803]
[ 0.111170] pci 0000:00:1f.5: reg 20: [io 0xa480-0xa48f]
[ 0.111176] pci 0000:00:1f.5: reg 24: [io 0xa400-0xa40f]
[ 0.111233] pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
[ 0.111243] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.111251] pci 0000:01:00.0: reg 18: [mem 0xfe8c0000-0xfe8dffff 64bit]
[ 0.111257] pci 0000:01:00.0: reg 20: [io 0xc000-0xc0ff]
[ 0.111267] pci 0000:01:00.0: reg 30: [mem 0xfe8a0000-0xfe8bffff pref]
[ 0.111292] pci 0000:01:00.0: supports D1 D2
[ 0.111307] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
[ 0.111317] pci 0000:01:00.1: reg 10: [mem 0xfe8fc000-0xfe8fffff 64bit]
[ 0.111362] pci 0000:01:00.1: supports D1 D2
[ 0.111386] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.111389] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.111391] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.111394] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.111424] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.111431] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.111476] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[ 0.111554] pci 0000:03:00.0: reg 24: [mem 0xfeafe000-0xfeafffff]
[ 0.111566] pci 0000:03:00.0: reg 30: [mem 0xfeae0000-0xfeaeffff pref]
[ 0.111612] pci 0000:03:00.0: PME# supported from D3hot
[ 0.111640] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[ 0.111661] pci 0000:03:00.1: reg 10: [io 0xdc00-0xdc07]
[ 0.111673] pci 0000:03:00.1: reg 14: [io 0xd880-0xd883]
[ 0.111685] pci 0000:03:00.1: reg 18: [io 0xd800-0xd807]
[ 0.111697] pci 0000:03:00.1: reg 1c: [io 0xd480-0xd483]
[ 0.111709] pci 0000:03:00.1: reg 20: [io 0xd400-0xd40f]
[ 0.111783] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.111791] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.111794] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.111797] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.111846] pci 0000:02:00.0: [1969:1048] type 00 class 0x020000
[ 0.111865] pci 0000:02:00.0: reg 10: [mem 0xfe9c0000-0xfe9fffff 64bit]
[ 0.111910] pci 0000:02:00.0: reg 30: [mem 0xfe9a0000-0xfe9bffff pref]
[ 0.111958] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.111976] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.111983] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.111987] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.112029] pci 0000:05:03.0: [1106:3044] type 00 class 0x0c0010
[ 0.112044] pci 0000:05:03.0: reg 10: [mem 0xfebff800-0xfebfffff]
[ 0.112052] pci 0000:05:03.0: reg 14: [io 0xec00-0xec7f]
[ 0.112110] pci 0000:05:03.0: supports D2
[ 0.112111] pci 0000:05:03.0: PME# supported from D2 D3hot D3cold
[ 0.112147] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.112150] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.112153] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.112158] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.112159] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.112161] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.112163] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.112164] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[ 0.112184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.112204] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.112254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.112279] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.112311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.112326] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.112328] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.113072] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.113104] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.113137] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.113168] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.113199] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.113230] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.113260] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.113290] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.113348] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.113348] vgaarb: loaded
[ 0.113348] vgaarb: bridge control possible 0000:01:00.0
[ 0.113348] SCSI subsystem initialized
[ 0.113348] ACPI: bus type scsi registered
[ 0.113348] libata version 3.00 loaded.
[ 0.113348] ACPI: bus type usb registered
[ 0.113348] usbcore: registered new interface driver usbfs
[ 0.113348] usbcore: registered new interface driver hub
[ 0.113348] usbcore: registered new device driver usb
[ 0.113348] PCI: Using ACPI for IRQ routing
[ 0.118304] PCI: pci_cache_line_size set to 64 bytes
[ 0.118361] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.118363] e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
[ 0.118426] NetLabel: Initializing
[ 0.118428] NetLabel: domain hash size = 128
[ 0.118429] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.118437] NetLabel: unlabeled traffic allowed by default
[ 0.118447] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.118447] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.118447] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.120010] Switching to clocksource hpet
[ 0.125087] AppArmor: AppArmor Filesystem Enabled
[ 0.125107] pnp: PnP ACPI init
[ 0.125116] ACPI: bus type pnp registered
[ 0.125173] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.125176] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.125208] pnp 00:01: [dma 4]
[ 0.125223] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.125250] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.125274] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.125294] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.125479] pnp 00:05: [dma 2]
[ 0.125513] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.125552] system 00:06: [io 0x0290-0x0297] has been reserved
[ 0.125555] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.125662] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.125664] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.125666] system 00:07: [io 0x0480-0x04bf] has been reserved
[ 0.125668] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.125670] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.125672] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.125674] system 00:07: [mem 0xffa00000-0xffafffff] has been reserved
[ 0.125676] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.125677] system 00:07: [mem 0xffe00000-0xffefffff] has been reserved
[ 0.125679] system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved
[ 0.125682] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.125736] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.125888] pnp 00:09: [dma 0 disabled]
[ 0.125932] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.125980] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.125982] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.125984] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.126022] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.126062] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.126065] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.126201] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.126203] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.126205] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.126207] system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.126209] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.126293] pnp: PnP ACPI: found 14 devices
[ 0.126294] ACPI: ACPI bus type pnp unregistered
[ 0.132193] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.132196] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000
[ 0.132202] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.132209] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.132211] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.132221] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.132223] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.132225] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.132227] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.132229] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.132232] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
[ 0.132235] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.132237] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.132239] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.132241] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.132244] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.132246] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.132249] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.132251] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.132254] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.132256] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.132260] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
[ 0.132263] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.132268] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.132270] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.132274] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.132277] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.132281] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.132283] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.132287] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.132290] pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.132295] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.132297] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.132301] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.132316] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.132326] pci 0000:00:1c.5: enabling device (0106 -> 0107)
[ 0.132332] pci 0000:00:1e.0: setting latency timer to 64
[ 0.132335] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.132337] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.132339] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.132340] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.132342] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.132344] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.132345] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.132347] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.132349] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.132350] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff]
[ 0.132352] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.132354] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.132355] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.132357] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.132359] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.132360] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.132362] pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.132364] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.132365] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.132367] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.132368] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.132370] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.132372] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.132374] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.132401] NET: Registered protocol family 2
[ 0.132538] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.132739] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.132917] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.132953] TCP: reno registered
[ 0.132959] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.132987] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.133049] NET: Registered protocol family 1
[ 0.133212] pci 0000:01:00.0: Boot video device
[ 0.133223] PCI: CLS 32 bytes, default 64
[ 0.133262] Trying to unpack rootfs image as initramfs...
[ 0.349238] Freeing initrd memory: 15872k freed
[ 0.353839] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.353845] software IO TLB [mem 0xcbf7e000-0xcff7e000] (64MB) mapped at [ffff8800cbf7e000-ffff8800cff7dfff]
[ 0.354158] Initialise module verification
[ 0.354202] audit: initializing netlink socket (disabled)
[ 0.354215] type=2000 audit(1375208301.352:1): initialized
[ 0.374419] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.375734] VFS: Disk quotas dquot_6.5.2
[ 0.375769] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.376159] fuse init (API version 7.20)
[ 0.376219] msgmni has been set to 7901
[ 0.376500] Key type asymmetric registered
[ 0.376502] Asymmetric key parser 'x509' registered
[ 0.376527] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.376548] io scheduler noop registered
[ 0.376550] io scheduler deadline registered (default)
[ 0.376555] io scheduler cfq registered
[ 0.376658] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.376716] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.376783] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.376847] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.376902] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.376913] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.376951] intel_idle: does not run on family 6 model 23
[ 0.377019] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.377024] ACPI: Power Button [PWRB]
[ 0.377054] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.377056] ACPI: Power Button [PWRF]
[ 0.377129] ACPI: Requesting acpi_cpufreq
[ 0.379233] GHES: HEST is not enabled!
[ 0.379301] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.399626] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.400638] Linux agpgart interface v0.103
[ 0.401657] brd: module loaded
[ 0.402149] loop: module loaded
[ 0.402231] ata_piix 0000:00:1f.2: version 2.13
[ 0.402247] ata_piix 0000:00:1f.2: MAP [
[ 0.402248] P0 -- P1 -- ]
[ 0.402276] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.402410] scsi0 : ata_piix
[ 0.402749] scsi1 : ata_piix
[ 0.403053] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[ 0.403056] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[ 0.403069] ata_piix 0000:00:1f.5: MAP [
[ 0.403070] P0 -- P1 -- ]
[ 0.403100] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.403206] scsi2 : ata_piix
[ 0.403480] scsi3 : ata_piix
[ 0.403730] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
[ 0.403732] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
[ 0.403927] libphy: Fixed MDIO Bus: probed
[ 0.403973] tun: Universal TUN/TAP device driver, 1.6
[ 0.403974] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.404010] PPP generic driver version 2.4.2
[ 0.404035] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.404036] ehci-pci: EHCI PCI platform driver
[ 0.404057] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 0.404060] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.404065] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.404076] ehci-pci 0000:00:1a.7: debug port 1
[ 0.407961] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.407972] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[ 0.416013] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.416051] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.416054] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.416057] usb usb1: Product: EHCI Host Controller
[ 0.416059] usb usb1: Manufacturer: Linux 3.8.0-28-generic ehci_hcd
[ 0.416062] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.416162] hub 1-0:1.0: USB hub found
[ 0.416165] hub 1-0:1.0: 6 ports detected
[ 0.416259] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 0.416261] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.416266] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.416276] ehci-pci 0000:00:1d.7: debug port 1
[ 0.420178] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.420191] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[ 0.432015] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.432029] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.432032] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.432035] usb usb2: Product: EHCI Host Controller
[ 0.432037] usb usb2: Manufacturer: Linux 3.8.0-28-generic ehci_hcd
[ 0.432040] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.432125] hub 2-0:1.0: USB hub found
[ 0.432129] hub 2-0:1.0: 6 ports detected
[ 0.432215] ehci-platform: EHCI generic platform driver
[ 0.432220] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.432231] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.432243] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.432245] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.432249] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.432275] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 0.432298] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.432300] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.432302] usb usb3: Product: UHCI Host Controller
[ 0.432303] usb usb3: Manufacturer: Linux 3.8.0-28-generic uhci_hcd
[ 0.432305] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.432363] hub 3-0:1.0: USB hub found
[ 0.432367] hub 3-0:1.0: 2 ports detected
[ 0.432418] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.432421] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.432425] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.432449] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.432472] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.432474] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.432476] usb usb4: Product: UHCI Host Controller
[ 0.432477] usb usb4: Manufacturer: Linux 3.8.0-28-generic uhci_hcd
[ 0.432479] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.432535] hub 4-0:1.0: USB hub found
[ 0.432537] hub 4-0:1.0: 2 ports detected
[ 0.432588] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.432591] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.432595] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.432613] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 0.432634] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.432636] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.432638] usb usb5: Product: UHCI Host Controller
[ 0.432639] usb usb5: Manufacturer: Linux 3.8.0-28-generic uhci_hcd
[ 0.432641] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.432696] hub 5-0:1.0: USB hub found
[ 0.432699] hub 5-0:1.0: 2 ports detected
[ 0.432748] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.432750] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.432754] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.432773] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 0.432795] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.432797] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.432798] usb usb6: Product: UHCI Host Controller
[ 0.432800] usb usb6: Manufacturer: Linux 3.8.0-28-generic uhci_hcd
[ 0.432802] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.432856] hub 6-0:1.0: USB hub found
[ 0.432859] hub 6-0:1.0: 2 ports detected
[ 0.432913] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.432915] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.432919] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.432943] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.432967] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.432969] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.432970] usb usb7: Product: UHCI Host Controller
[ 0.432972] usb usb7: Manufacturer: Linux 3.8.0-28-generic uhci_hcd
[ 0.432973] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.433029] hub 7-0:1.0: USB hub found
[ 0.433032] hub 7-0:1.0: 2 ports detected
[ 0.433080] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.433083] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.433086] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.433106] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 0.433128] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.433130] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.433132] usb usb8: Product: UHCI Host Controller
[ 0.433133] usb usb8: Manufacturer: Linux 3.8.0-28-generic uhci_hcd
[ 0.433135] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.433191] hub 8-0:1.0: USB hub found
[ 0.433194] hub 8-0:1.0: 2 ports detected
[ 0.433282] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.433283] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.433958] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.434023] mousedev: PS/2 mouse device common for all mice
[ 0.434117] rtc_cmos 00:02: RTC can wake from S4
[ 0.434205] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.434225] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.434286] device-mapper: uevent: version 1.0.3
[ 0.434327] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 0.434332] cpuidle: using governor ladder
[ 0.434334] cpuidle: using governor menu
[ 0.434336] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.434338] EFI Variables Facility v0.08 2004-May-17
[ 0.434450] ashmem: initialized
[ 0.434531] TCP: cubic registered
[ 0.434602] NET: Registered protocol family 10
[ 0.434729] NET: Registered protocol family 17
[ 0.434737] Key type dns_resolver registered
[ 0.434883] Loading module verification certificates
[ 0.435656] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 5707af7d8c3f1f0a9542b007a5f82b965f14fbd3'
[ 0.435671] registered taskstats version 1
[ 0.437446] Key type trusted registered
[ 0.438798] Key type encrypted registered
[ 0.440432] rtc_cmos 00:02: setting system clock to 2013-07-30 18:18:22 UTC (1375208302)
[ 0.440611] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.440613] EDD information not available.
[ 0.730530] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.730532] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.741066] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.872899] usb 1-1: New USB device found, idVendor=03f0, idProduct=5c12
[ 0.872902] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 0.872905] usb 1-1: Product: Officejet 6700
[ 0.872907] usb 1-1: Manufacturer: HP
[ 0.872915] usb 1-1: SerialNumber: CN2352G13N05RQ
[ 0.884045] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.884143] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.892334] ata1.00: ATA-8: ST250DM001 HD256GJ, 1AR10001, max UDMA/133
[ 0.892337] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.892586] ata2.00: ATA-8: WDC WD5000AAKS-00WWPA0, 01.03B01, max UDMA/133
[ 0.892588] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.900330] ata1.00: configured for UDMA/133
[ 0.900438] scsi 0:0:0:0: Direct-Access ATA ST250DM001 HD256 1AR1 PQ: 0 ANSI: 5
[ 0.900558] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 0.900585] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.900610] sd 0:0:0:0: [sda] Write Protect is off
[ 0.900612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.900631] ata2.00: configured for UDMA/133
[ 0.900635] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.900681] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
[ 0.900761] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 0.900806] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.900892] sd 1:0:0:0: [sdb] Write Protect is off
[ 0.900894] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.900914] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.917306] sdb: sdb1
[ 0.917497] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 0.940721] sda: sda1 sda2
[ 0.940941] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.941963] Freeing unused kernel memory: 996k freed
[ 0.942181] Write protecting the kernel read-only data: 12288k
[ 0.944544] Freeing unused kernel memory: 1168k freed
[ 0.946822] Freeing unused kernel memory: 1076k freed
[ 0.954424] udevd[105]: starting version 175
[ 0.958868] Disabling lock debugging due to kernel taint
[ 0.959063] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60c
[ 0.960004] microcode: CPU0 updated to revision 0x60f, date = 2010-09-29
[ 0.963581] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60c
[ 0.967552] microcode: CPU1 updated to revision 0x60f, date = 2010-09-29
[ 0.980584] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.009635] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.009670] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.011725] atl1 0000:02:00.0: version 2.1.3
[ 1.013546] scsi4 : pata_jmicron
[ 1.017797] scsi5 : pata_jmicron
[ 1.017980] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 1.017982] ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 1.018126] ahci 0000:03:00.0: version 3.0
[ 1.032105] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.032110] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.032907] Floppy drive(s): fd0 is 1.44M
[ 1.034737] scsi6 : ahci
[ 1.036134] scsi7 : ahci
[ 1.036182] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[ 1.036185] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[ 1.051666] FDC 0 is a post-1991 82077
[ 1.092053] firewire_ohci 0000:05:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.181110] ata5.00: ATAPI: LTN526, YH0X, max UDMA/33
[ 1.181118] ata5.01: ATAPI: SAMSUNG CDRW/DVD SM-348B, T503, max UDMA/33
[ 1.188656] ata5.00: configured for UDMA/33
[ 1.191047] Initializing USB Mass Storage driver...
[ 1.191137] scsi8 : usb-storage 1-1:1.2
[ 1.191193] usbcore: registered new interface driver usb-storage
[ 1.191195] USB Mass Storage support registered.
[ 1.204506] ata5.01: configured for UDMA/33
[ 1.206297] scsi 4:0:0:0: CD-ROM LITEON CD-ROM LTN526 YH0X PQ: 0 ANSI: 5
[ 1.208073] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 1.208076] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.208179] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.208227] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 1.209135] scsi 4:0:1:0: CD-ROM SAMSUNG CDRW/DVD SM-348B T503 PQ: 0 ANSI: 5
[ 1.210175] sr1: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
[ 1.210271] sr 4:0:1:0: Attached scsi CD-ROM sr1
[ 1.210397] sr 4:0:1:0: Attached scsi generic sg3 type 5
[ 1.300015] usb 2-4: new high-speed USB device number 2 using ehci-pci
[ 1.352013] tsc: Refined TSC clocksource calibration: 3172.529 MHz
[ 1.352018] Switching to clocksource tsc
[ 1.356025] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.356056] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.448858] usb 2-4: New USB device found, idVendor=0cf3, idProduct=9271
[ 1.448863] usb 2-4: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 1.448866] usb 2-4: Product: USB2.0 WLAN
[ 1.448868] usb 2-4: Manufacturer: ATHEROS
[ 1.448876] usb 2-4: SerialNumber: 12345
[ 1.592075] firewire_core 0000:05:03.0: created device fw0: GUID 001e8c000012a86e, S400
[ 1.688010] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 1.870479] usb 4-1: New USB device found, idVendor=046d, idProduct=c525
[ 1.870482] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.870485] usb 4-1: Product: USB Receiver
[ 1.870488] usb 4-1: Manufacturer: Logitech
[ 1.884524] usbcore: registered new interface driver usbhid
[ 1.884527] usbhid: USB HID core driver
[ 1.886620] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input2
[ 1.886702] hid-generic 0003:046D:C525.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-1/input0
[ 1.888563] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input3
[ 1.888675] hid-generic 0003:046D:C525.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-1/input1
[ 2.116010] usb 4-2: new low-speed USB device number 3 using uhci_hcd
[ 2.188544] scsi 8:0:0:0: Direct-Access HP Officejet 6700 1.00 PQ: 0 ANSI: 5
[ 2.188827] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 2.190028] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 2.286479] usb 4-2: New USB device found, idVendor=04f2, idProduct=0833
[ 2.286483] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.286486] usb 4-2: Product: USB Keyboard
[ 2.286488] usb 4-2: Manufacturer: CHICONY
[ 2.301716] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input4
[ 2.301762] hid-generic 0003:04F2:0833.0003: input,hidraw2: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1a.1-2/input0
[ 2.336529] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input5
[ 2.336628] hid-generic 0003:04F2:0833.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:1a.1-2/input1
[ 6.189209] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 25.856407] Adding 8846332k swap on /dev/sda1. Priority:-1 extents:1 across:8846332k
[ 25.925914] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.015955] udevd[372]: starting version 175
[ 26.393461] type=1400 audit(1375208328.447:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=560 comm="apparmor_parser"
[ 26.393928] type=1400 audit(1375208328.447:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=560 comm="apparmor_parser"
[ 26.394185] type=1400 audit(1375208328.447:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=560 comm="apparmor_parser"
[ 26.395241] type=1400 audit(1375208328.447:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=567 comm="apparmor_parser"
[ 26.395704] type=1400 audit(1375208328.447:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=567 comm="apparmor_parser"
[ 26.395960] type=1400 audit(1375208328.447:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=567 comm="apparmor_parser"
[ 27.302468] lp: driver loaded but no devices found
[ 27.310140] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 27.310142] AMD IOMMUv2 functionality not available on this system
[ 27.387325] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 27.465737] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 27.574908] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 27.814714] cfg80211: Calling CRDA to update world regulatory domain
[ 28.106049] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 28.217997] cfg80211: World regulatory domain updated:
[ 28.218001] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 28.218002] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 28.218004] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 28.218005] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 28.218007] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 28.218008] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 28.476797] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 28.520969] usb 2-4: ath9k_htc: Firmware htc_9271.fw requested
[ 28.521209] usbcore: registered new interface driver ath9k_htc
[ 28.537037] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 28.537140] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 28.537227] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 28.537310] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 28.537395] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 28.537478] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 28.537558] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 28.537638] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 28.537945] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 28.537989] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[ 28.580480] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 29.075743] usb 2-4: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[ 29.137958] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 29.146546] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3791 MBytes.
[ 29.146675] <6>[fglrx] vendor: 1002 device: 68f9 count: 1
[ 29.147016] <6>[fglrx] ioport: bar 4, base 0xc000, size: 0x100
[ 29.147261] <6>[fglrx] Kernel PAT support is enabled
[ 29.147273] <6>[fglrx] module loaded - fglrx 12.10.5 [Jan 28 2013] with 1 minors
[ 29.310741] ath9k_htc 2-4:1.0: ath9k_htc: HTC initialized with 33 credits
[ 29.496867] ath9k_htc 2-4:1.0: ath9k_htc: FW Version: 1.3
[ 29.496871] ath: EEPROM regdomain: 0x809c
[ 29.496873] ath: EEPROM indicates we should expect a country code
[ 29.496875] ath: doing EEPROM country->regdmn map search
[ 29.496877] ath: country maps to regdmn code: 0x52
[ 29.496879] ath: Country alpha2 being used: CN
[ 29.496880] ath: Regpair used: 0x52
[ 29.551776] ieee80211 phy0: Atheros AR9271 Rev:1
[ 29.551789] cfg80211: Calling CRDA for country: CN
[ 29.554897] cfg80211: Regulatory domain changed to country: CN
[ 29.554899] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 29.554901] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 29.554903] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 29.884692] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 29.966186] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 31.433413] init: failsafe main process (1115) killed by TERM signal
[ 31.786897] type=1400 audit(1375208333.839:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1185 comm="apparmor_parser"
[ 31.787217] type=1400 audit(1375208333.839:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1184 comm="apparmor_parser"
[ 31.787371] type=1400 audit(1375208333.839:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1185 comm="apparmor_parser"
[ 31.787572] type=1400 audit(1375208333.839:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1184 comm="apparmor_parser"
[ 31.787628] type=1400 audit(1375208333.839:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1185 comm="apparmor_parser"
[ 31.789870] type=1400 audit(1375208333.843:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=1188 comm="apparmor_parser"
[ 31.792195] type=1400 audit(1375208333.847:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1189 comm="apparmor_parser"
[ 31.792742] type=1400 audit(1375208333.847:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1189 comm="apparmor_parser"
[ 31.793772] type=1400 audit(1375208333.847:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1186 comm="apparmor_parser"
[ 31.794849] type=1400 audit(1375208333.847:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1190 comm="apparmor_parser"
[ 32.009649] Bluetooth: Core ver 2.16
[ 32.009680] NET: Registered protocol family 31
[ 32.009681] Bluetooth: HCI device and connection manager initialized
[ 32.009801] Bluetooth: HCI socket layer initialized
[ 32.009803] Bluetooth: L2CAP socket layer initialized
[ 32.009808] Bluetooth: SCO socket layer initialized
[ 32.147663] Bluetooth: RFCOMM TTY layer initialized
[ 32.147676] Bluetooth: RFCOMM socket layer initialized
[ 32.147677] Bluetooth: RFCOMM ver 1.11
[ 32.163087] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 32.163089] Bluetooth: BNEP filters: protocol multicast
[ 32.163092] Bluetooth: BNEP socket layer initialized
[ 32.191656] init: avahi-cups-reload main process (1224) terminated with status 1
[ 32.285953] ppdev: user-space parallel port driver
[ 32.953972] atl1 0000:02:00.0: irq 46 for MSI/MSI-X
[ 32.954041] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.954221] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.057645] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 33.057920] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.280791] wlan0: authenticate with 00:24:d4:d4:78:b4
[ 35.329522] wlan0: send auth to 00:24:d4:d4:78:b4 (try 1/3)
[ 35.332257] wlan0: authenticated
[ 35.336013] wlan0: associate with 00:24:d4:d4:78:b4 (try 1/3)
[ 35.338879] wlan0: RX AssocResp from 00:24:d4:d4:78:b4 (capab=0x411 status=0 aid=2)
[ 35.342251] wlan0: associated
[ 35.342276] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 37.310592] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ 37.314142] [UFW BLOCK] IN=wlan0 OUT= MAC=f8:d1:11:0c:e3:11:00:24:d4:ab:8f:19:08:00 SRC=213.204.117.109 DST=192.168.0.18 LEN=58 TOS=0x00 PREC=0x00 TTL=110 ID=12293 PROTO=UDP SPT=35837 DPT=55554 LEN=38
[ 37.817253] vboxdrv: Found 2 processor cores.
[ 37.817548] vboxdrv: fAsync=0 offMin=0x260 offMax=0x880
[ 37.817601] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 37.817602] vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004).
[ 37.875723] vboxpci: IOMMU not found (not registered)
[ 38.374595] [UFW BLOCK] IN=wlan0 OUT= MAC=f8:d1:11:0c:e3:11:00:24:d4:ab:8f:19:08:00 SRC=89.92.76.22 DST=192.168.0.18 LEN=58 TOS=0x00 PREC=0x00 TTL=115 ID=19637 PROTO=UDP SPT=59934 DPT=55554 LEN=38
[ 38.645015] [UFW BLOCK] IN=wlan0 OUT= MAC=f8:d1:11:0c:e3:11:00:24:d4:ab:8f:19:08:00 SRC=83.198.166.48 DST=192.168.0.18 LEN=58 TOS=0x00 PREC=0x00 TTL=115 ID=12039 PROTO=UDP SPT=37424 DPT=55554 LEN=38
[ 40.584299] [UFW BLOCK] IN=wlan0 OUT= MAC=f8:d1:11:0c:e3:11:00:24:d4:ab:8f:19:08:00 SRC=213.204.117.109 DST=192.168.0.18 LEN=58 TOS=0x00 PREC=0x00 TTL=110 ID=12685 PROTO=UDP SPT=35837 DPT=55554 LEN=38
[ 41.974663] [UFW BLOCK] IN=wlan0 OUT= MAC=f8:d1:11:0c:e3:11:00:24:d4:ab:8f:19:08:00 SRC=186.80.89.50 DST=192.168.0.18 LEN=131 TOS=0x00 PREC=0x00 TTL=115 ID=2181 PROTO=UDP SPT=63100 DPT=55554 LEN=111
[ 42.859040] [UFW BLOCK] IN=wlan0 OUT= MAC=f8:d1:11:0c:e3:11:00:24:d4:ab:8f:19:08:00 SRC=186.80.89.50 DST=192.168.0.18 LEN=131 TOS=0x00 PREC=0x00 TTL=115 ID=2269 PROTO=UDP SPT=63100 DPT=55554 LEN=111
[ 44.712137] [UFW BLOCK] IN=wlan0 OUT= MAC=f8:d1:11:0c:e3:11:00:24:d4:ab:8f:19:08:00 SRC=83.198.166.48 DST=192.168.0.18 LEN=58 TOS=0x00 PREC=0x00 TTL=115 ID=12624 PROTO=UDP SPT=37424 DPT=55554 LEN=38
[ 45.893796] [UFW BLOCK] IN=wlan0 OUT= MAC=f8:d1:11:0c:e3:11:00:24:d4:ab:8f:19:08:00 SRC=186.80.89.50 DST=192.168.0.18 LEN=131 TOS=0x00 PREC=0x00 TTL=115 ID=2529 PROTO=UDP SPT=63100 DPT=55554 LEN=111
[ 46.631783] [UFW BLOCK] IN=wlan0 OUT= MAC=f8:d1:11:0c:e3:11:00:24:d4:ab:8f:19:08:00 SRC=213.204.117.109 DST=192.168.0.18 LEN=58 TOS=0x00 PREC=0x00 TTL=110 ID=13335 PROTO=UDP SPT=35837 DPT=55554 LEN=38
[ 57.975257] [UFW BLOCK] IN=wlan0 OUT= MAC=f8:d1:11:0c:e3:11:00:24:d4:ab:8f:19:08:00 SRC=186.80.89.50 DST=192.168.0.18 LEN=131 TOS=0x00 PREC=0x00 TTL=115 ID=3741 PROTO=UDP SPT=63100 DPT=55554 LEN=111
[ 60.045213] [UFW BLOCK] IN=wlan0 OUT= MAC=f8:d1:11:0c:e3:11:00:24:d4:ab:8f:19:08:00 SRC=186.80.89.50 DST=192.168.0.18 LEN=131 TOS=0x00 PREC=0x00 TTL=115 ID=3917 PROTO=UDP SPT=63100 DPT=55554 LEN=111
[ 79.266492] [UFW BLOCK] IN=wlan0 OUT= MAC=f8:d1:11:0c:e3:11:00:24:d4:ab:8f:19:08:00 SRC=31.39.13.161 DST=192.168.0.18 LEN=58 TOS=0x00 PREC=0x00 TTL=119 ID=12053 PROTO=UDP SPT=48610 DPT=55554 LEN=38
[ 87.139381] WARNING! power/level is deprecated; use power/control instead
[ 87.168325] usblp 1-1:1.1: usblp2: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5C12
[ 87.168713] usblp 1-1:1.3: usblp3: USB Bidirectional printer dev 2 if 3 alt 0 proto 2 vid 0x03F0 pid 0x5C12
[ 87.168739] usbcore: registered new interface driver usblp
[ 87.214941] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 87.214944] vesafb: scrolling: redraw
[ 87.214945] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 87.217695] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011000000, using 5824k, total 5824k
[ 87.217851] Console: switching to colour frame buffer device 175x65
[ 87.220861] fb0: VESA VGA frame buffer device
[ 87.285842] init: plymouth-splash main process (3570) terminated with status 1
[ 87.452209] fglrx_pci 0000:01:00.0: irq 47 for MSI/MSI-X
[ 87.452631] <6>[fglrx] Firegl kernel thread PID: 3590
[ 87.452677] <6>[fglrx] Firegl kernel thread PID: 3591
[ 87.452721] <6>[fglrx] Firegl kernel thread PID: 3592
[ 87.452792] <6>[fglrx] IRQ 47 Enabled
[ 87.456723] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 87.456725] <6>[fglrx] Reserved FB block: Unshared offset:f920000, size:3e0000
[ 87.456726] <6>[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 99.062591] [UFW BLOCK] IN=wlan0 OUT= MAC=f8:d1:11:0c:e3:11:00:24:d4:ab:8f:19:08:00 SRC=82.242.130.223 DST=192.168.0.18 LEN=58 TOS=0x00 PREC=0x00 TTL=119 ID=7623 PROTO=UDP SPT=32222 DPT=55554 LEN=38Dernière modification par nam1962 (Le 30/07/2013, à 20:23)
[ Modéré ]
Hors ligne
#21 Le 30/07/2013, à 21:19
- hibou7
Re : Xubuntu 13.04 boot lent
J'ai l'impression que ce qui prend beaucoup de temps commence par
[UFW Block], tu pourrais regarder ici:
https://www.linuxquestions.org/question … ve-914679/
Xubuntu 22.04 sur HP ENVY TS Sleekbook 4 | CPU: Intel Core i5-3337U | RAM: 8 Gio
Débuter en Console
Si GNU/Linux ne répond plus, le redémarrer proprement avec la combinaison de touches:
Alt + SysRq + REISUB (Retourne en Islande sur un bateau).
Hors ligne
#22 Le 30/07/2013, à 22:04
- nam1962
Re : Xubuntu 13.04 boot lent
Ce serait Xscreensaver ?
[ Modéré ]
Hors ligne
#23 Le 31/07/2013, à 07:17
- F50
Re : Xubuntu 13.04 boot lent
Pourquoi tu as deux efi dans ton fstab dont l'un est commenté?
# /boot/efi was on /dev/sda1 during installation
#UUID=98EE-FCCB /boot/efi vfat defaults 0 1
Et
UUID=98EE-FCCB /boot/efi vfat defaults 0 1
Décommente la première UUID et supprime la deuxième.
@ hibou7: UFW block n'intervient qu'une fois la connexion internet établie, bien après le montage des partitions, chez moi:
07-31 06:46 kernel: [ 5.315943] r8169 0000:02:00.0 eth0: link up
07-31 06:46 kernel: [ 5.315953] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
07-31 06:46 dbus: <29>Jul 31 06:46:36 dbus[919]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
07-31 06:46 dbus: <29>Jul 31 06:46:36 dbus[919]: [system] Successfully activated service 'org.freedesktop.UDisks'
07-31 06:53 kernel: [ 441.417284] CE: hpet increased min_delta_ns to 20113 nsec
07-31 06:55 kernel: [ 559.271329] [UFW BLOCK] IN=eth0 OUT= MAC=6c:f0:49:75:ca:25:00:17:10:05:b5:4f:08:00 SRC=82.221.105.7 DST=46.126.168.44 LEN=71 TOS=0x00 PREC=0x00 TTL=117 ID=47917 PROTO=UDP SPT=1820 DPT=161 LEN=51
De même que xscreensaver...
P.S. As-tu désactivé le floppy dans le bios car ça ralentis passablement?
Dernière modification par fcn50 (Le 31/07/2013, à 08:10)
#24 Le 31/07/2013, à 08:27
- nam1962
Re : Xubuntu 13.04 boot lent
Bonjour et re-merci pour votre temps
fcn50, ce n'est pas moi qui ai écrit le fstab, mais le petit bonhomme qui est caché dans mon Xubuntu 
!
Bon, j'ai décommenté et enlevé la 2e entrée sur la machine 1, il y a un petit progrès !
P 00040000)
[ 0.000000] ACPI: MCFG 000000009aff8000 0003C (v01 HPQOEM 18A4 00000001 HP 00040000)
[ 0.000000] ACPI: WDAT 000000009afe7000 00224 (v01 HPQOEM 18A4 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 000000009afe6000 006FE (v01 HPQOEM 18A4 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 000000009afe4000 00028 (v01 HPQOEM 18A4 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 000000009afe3000 004C1 (v01 HPQOEM 18A4 00001000 ACPI 00040000)
[ 0.000000] ACPI: ASPT 000000009afe1000 00034 (v07 HPQOEM 18A4 00000001 HP 00040000)
[ 0.000000] ACPI: DBGP 000000009afe0000 00034 (v01 HPQOEM 18A4 00000001 HP 00040000)
[ 0.000000] ACPI: FPDT 000000009afde000 00044 (v01 HPQOEM 18A4 00000001 HP 00040000)
[ 0.000000] ACPI: MSDM 000000009afdd000 00055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 000000009afdc000 009AA (v01 HPQOEM 18A4 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afdb000 00A92 (v01 HPQOEM 18A4 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afd7000 01F1F (v01 HPQOEM 18A4 00001000 ACPI 00040000)
[ 0.000000] ACPI: UEFI 000000009afda000 0005C (v01 HPQOEM 18A4 00000000 HP 00040000)
[ 0.000000] ACPI: BGRT 000000009afd9000 00038 (v01 HPQOEM 18A4 00000001 HP 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001df5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1df5fffff]
[ 0.000000] NODE_DATA [mem 0x1df5fb000-0x1df5fffff]
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff8801d8c00000-ffff8801debfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1df5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0x90cc0fff]
[ 0.000000] node 0: [mem 0x91a42000-0x9a4befff]
[ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
[ 0.000000] node 0: [mem 0x100000000-0x1df5fffff]
[ 0.000000] On node 0 totalpages: 1542327
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 120 pages reserved
[ 0.000000] DMA zone: 3776 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9741 pages used for memmap
[ 0.000000] DMA32 zone: 613682 pages, LIFO batch:31
[ 0.000000] Normal zone: 14296 pages used for memmap
[ 0.000000] Normal zone: 900648 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000088000 - 00000000000c0000
[ 0.000000] PM: Registered nosave memory: 00000000000c0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 0000000090cc1000 - 0000000091a42000
[ 0.000000] PM: Registered nosave memory: 000000009a4bf000 - 000000009aebf000
[ 0.000000] PM: Registered nosave memory: 000000009aebf000 - 000000009afbf000
[ 0.000000] PM: Registered nosave memory: 000000009afbf000 - 000000009afff000
[ 0.000000] PM: Registered nosave memory: 000000009b000000 - 000000009fa00000
[ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb80000
[ 0.000000] PM: Registered nosave memory: 00000000ffb80000 - 0000000100000000
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801df200000 s85056 r8192 d21440 u262144
[ 0.000000] pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1518106
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-28-generic root=UUID=2db2e89d-de3e-469b-bf56-425af700378f ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5919368k/7854080k available (7013k kernel code, 1684772k absent, 249940k reserved, 6229k data, 996k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 25165824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2394.599 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.19 BogoMIPS (lpj=9578396)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.036861] Security Framework initialized
[ 0.036870] AppArmor: AppArmor initialized
[ 0.036871] Yama: becoming mindful.
[ 0.037381] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.038995] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.039692] Mount-cache hash table entries: 256
[ 0.039845] Initializing cgroup subsys cpuacct
[ 0.039848] Initializing cgroup subsys memory
[ 0.039853] Initializing cgroup subsys devices
[ 0.039855] Initializing cgroup subsys freezer
[ 0.039856] Initializing cgroup subsys blkio
[ 0.039857] Initializing cgroup subsys perf_event
[ 0.039859] Initializing cgroup subsys hugetlb
[ 0.039881] CPU: Physical Processor ID: 0
[ 0.039882] CPU: Processor Core ID: 0
[ 0.039886] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.039886] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.039889] mce: CPU supports 7 MCE banks
[ 0.039900] CPU0: Thermal monitoring enabled (TM1)
[ 0.039906] process: using mwait in idle threads
[ 0.039909] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.039909] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.039909] tlb_flushall_shift: 5
[ 0.040047] Freeing SMP alternatives: 24k freed
[ 0.042567] ACPI: Core revision 20121018
[ 0.064119] ftrace: allocating 26712 entries in 105 pages
[ 0.078072] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.117700] smpboot: CPU0: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
[ 0.117708] TSC deadline timer enabled
[ 0.117713] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.117719] ... version: 3
[ 0.117720] ... bit width: 48
[ 0.117721] ... generic registers: 4
[ 0.117722] ... value mask: 0000ffffffffffff
[ 0.117724] ... max period: 000000007fffffff
[ 0.117724] ... fixed-purpose events: 3
[ 0.117726] ... event mask: 000000070000000f
[ 0.131880] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.118685] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.158280] Brought up 4 CPUs
[ 0.158284] smpboot: Total of 4 processors activated (19156.79 BogoMIPS)
[ 0.161520] devtmpfs: initialized
[ 0.162372] EVM: security.selinux
[ 0.162373] EVM: security.SMACK64
[ 0.162374] EVM: security.capability
[ 0.162418] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[ 0.163122] regulator-dummy: no parameters
[ 0.163163] NET: Registered protocol family 16
[ 0.163290] ACPI: bus type pci registered
[ 0.163353] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.163355] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.188497] PCI: Using configuration type 1 for base access
[ 0.189285] bio: create slab <bio-0> at 0
[ 0.189360] ACPI: Added _OSI(Module Device)
[ 0.189361] ACPI: Added _OSI(Processor Device)
[ 0.189363] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.189366] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.191251] ACPI: EC: Look up EC in DSDT
[ 0.193455] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.197172] ACPI: SSDT 000000009ae19018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
[ 0.197651] ACPI: Dynamic OEM Table Load:
[ 0.197654] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
[ 0.209542] ACPI: SSDT 000000009ae5ba98 00303 (v01 PmRef ApIst 00003000 INTL 20111123)
[ 0.210038] ACPI: Dynamic OEM Table Load:
[ 0.210040] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20111123)
[ 0.210164] ACPI: SSDT 000000009ae18d98 00119 (v01 PmRef ApCst 00003000 INTL 20111123)
[ 0.210638] ACPI: Dynamic OEM Table Load:
[ 0.210640] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20111123)
[ 0.211491] ACPI: Interpreter enabled
[ 0.211494] ACPI: (supports S0 S3 S4 S5)
[ 0.211513] ACPI: Using IOAPIC for interrupt routing
[ 0.336643] ACPI: Power Resource [FN00] (off)
[ 0.336728] ACPI: Power Resource [FN01] (off)
[ 0.336809] ACPI: Power Resource [FN02] (off)
[ 0.336892] ACPI: Power Resource [FN03] (off)
[ 0.336974] ACPI: Power Resource [FN04] (off)
[ 0.337311] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.337633] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.337637] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.337780] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.337782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.337926] \_SB_.PCI0:_OSC invalid UUID
[ 0.337927] _OSC request data:1 8 0
[ 0.338208] PCI host bridge to bus 0000:00
[ 0.338211] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.338215] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.338217] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.338219] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.338220] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.338222] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.338224] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.338225] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.338227] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.338229] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.338230] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.338232] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.338234] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.338235] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.338237] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.338239] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.338240] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.338242] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 0.338250] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.338288] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.338320] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.338339] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.338350] pci 0000:00:02.0: reg 10: [mem 0xc1000000-0xc13fffff 64bit]
[ 0.338356] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.338360] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 0.338412] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.338435] pci 0000:00:14.0: reg 10: [mem 0xc1700000-0xc170ffff 64bit]
[ 0.338509] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.338534] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.338558] pci 0000:00:16.0: reg 10: [mem 0xc1714000-0xc171400f 64bit]
[ 0.338636] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.338671] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.338694] pci 0000:00:1a.0: reg 10: [mem 0xc1719000-0xc17193ff]
[ 0.338786] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.338814] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.338830] pci 0000:00:1b.0: reg 10: [mem 0xc1710000-0xc1713fff 64bit]
[ 0.338901] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.338924] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.339004] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.339030] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.339110] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.339148] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.339169] pci 0000:00:1d.0: reg 10: [mem 0xc1718000-0xc17183ff]
[ 0.339261] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.339288] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.339417] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 0.339437] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
[ 0.339445] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
[ 0.339453] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
[ 0.339462] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
[ 0.339470] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 0.339479] pci 0000:00:1f.2: reg 24: [mem 0xc1717000-0xc17177ff]
[ 0.339525] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.339545] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.339562] pci 0000:00:1f.3: reg 10: [mem 0xc1715000-0xc17150ff 64bit]
[ 0.339583] pci 0000:00:1f.3: reg 20: [io 0x4040-0x405f]
[ 0.339643] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[ 0.339655] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.339664] pci 0000:01:00.0: reg 18: [mem 0xc0000000-0xc001ffff 64bit]
[ 0.339671] pci 0000:01:00.0: reg 20: [io 0x3000-0x30ff]
[ 0.339683] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.339713] pci 0000:01:00.0: supports D1 D2
[ 0.346147] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.346156] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.346163] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc0ffffff]
[ 0.346173] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.346293] pci 0000:07:00.0: [10ec:5289] type 00 class 0xff0000
[ 0.346314] pci 0000:07:00.0: reg 10: [mem 0xc1600000-0xc160ffff]
[ 0.346471] pci 0000:07:00.0: supports D1 D2
[ 0.346473] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.346534] pci 0000:07:00.2: [10ec:8168] type 00 class 0x020000
[ 0.346554] pci 0000:07:00.2: reg 10: [io 0x2000-0x20ff]
[ 0.346589] pci 0000:07:00.2: reg 18: [mem 0xc1404000-0xc1404fff 64bit pref]
[ 0.346611] pci 0000:07:00.2: reg 20: [mem 0xc1400000-0xc1403fff 64bit pref]
[ 0.346704] pci 0000:07:00.2: supports D1 D2
[ 0.346705] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.354162] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.354172] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.354182] pci 0000:00:1c.0: bridge window [mem 0xc1600000-0xc16fffff]
[ 0.354196] pci 0000:00:1c.0: bridge window [mem 0xc1400000-0xc14fffff 64bit pref]
[ 0.354304] pci 0000:08:00.0: [1814:3290] type 00 class 0x028000
[ 0.354325] pci 0000:08:00.0: reg 10: [mem 0xc1510000-0xc151ffff]
[ 0.354467] pci 0000:08:00.0: PME# supported from D0 D3hot
[ 0.354518] pci 0000:08:00.1: [1814:3298] type 00 class 0x0d1100
[ 0.354538] pci 0000:08:00.1: reg 10: [mem 0xc1500000-0xc150ffff]
[ 0.354680] pci 0000:08:00.1: supports D1
[ 0.354681] pci 0000:08:00.1: PME# supported from D0 D1 D3hot
[ 0.362189] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.362204] pci 0000:00:1c.1: bridge window [mem 0xc1500000-0xc15fffff]
[ 0.362271] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.362301] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.362342] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.362427] \_SB_.PCI0:_OSC invalid UUID
[ 0.362428] _OSC request data:1 1f 0
[ 0.362431] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.362433] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.363014] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.363055] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.363094] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.363134] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.363173] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.363211] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.363250] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.363289] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.363379] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.363383] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.363385] vgaarb: loaded
[ 0.363386] vgaarb: bridge control possible 0000:01:00.0
[ 0.363387] vgaarb: no bridge control possible 0000:00:02.0
[ 0.363524] SCSI subsystem initialized
[ 0.363526] ACPI: bus type scsi registered
[ 0.363566] libata version 3.00 loaded.
[ 0.363580] ACPI: bus type usb registered
[ 0.363595] usbcore: registered new interface driver usbfs
[ 0.363601] usbcore: registered new interface driver hub
[ 0.363619] usbcore: registered new device driver usb
[ 0.363687] PCI: Using ACPI for IRQ routing
[ 0.370310] PCI: pci_cache_line_size set to 64 bytes
[ 0.370384] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.370386] e820: reserve RAM buffer [mem 0x90cc1000-0x93ffffff]
[ 0.370387] e820: reserve RAM buffer [mem 0x9a4bf000-0x9bffffff]
[ 0.370389] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 0.370390] e820: reserve RAM buffer [mem 0x1df600000-0x1dfffffff]
[ 0.370462] NetLabel: Initializing
[ 0.370464] NetLabel: domain hash size = 128
[ 0.370465] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.370473] NetLabel: unlabeled traffic allowed by default
[ 0.370522] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.370528] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.372535] Switching to clocksource hpet
[ 0.377016] AppArmor: AppArmor Filesystem Enabled
[ 0.377039] pnp: PnP ACPI init
[ 0.377050] ACPI: bus type pnp registered
[ 0.377082] pnp 00:00: [dma 4]
[ 0.377101] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.377117] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.377211] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.377237] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.377275] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.377278] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.377280] system 00:04: [io 0xffff] has been reserved
[ 0.377282] system 00:04: [io 0xffff] has been reserved
[ 0.377283] system 00:04: [io 0x0400-0x0453] has been reserved
[ 0.377285] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.377287] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.377289] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.377292] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.377313] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.377351] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.377354] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.377386] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 0.377410] pnp 00:08: Plug and Play ACPI device, IDs SYN1e76 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.436630] pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.436738] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.436740] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.436742] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.436744] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.436746] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.436748] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.436750] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.436752] system 00:0a: [mem 0xff000000-0xff000fff] has been reserved
[ 0.436754] system 00:0a: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.436756] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.436758] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 0.436761] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.437112] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[ 0.437114] system 00:0b: [mem 0x40000000-0x401fffff] has been reserved
[ 0.437117] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.437202] pnp: PnP ACPI: found 12 devices
[ 0.437203] ACPI: ACPI bus type pnp unregistered
[ 0.443367] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.443397] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0020000-0xc003ffff pref]
[ 0.443400] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.443402] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.443405] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc0ffffff]
[ 0.443408] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.443411] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.443415] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.443420] pci 0000:00:1c.0: bridge window [mem 0xc1600000-0xc16fffff]
[ 0.443425] pci 0000:00:1c.0: bridge window [mem 0xc1400000-0xc14fffff 64bit pref]
[ 0.443431] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.443437] pci 0000:00:1c.1: bridge window [mem 0xc1500000-0xc15fffff]
[ 0.443469] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.443471] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.443472] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.443474] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.443476] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.443478] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.443479] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.443481] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.443483] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.443484] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.443486] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.443488] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.443489] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.443491] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.443493] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.443494] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.443496] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff]
[ 0.443498] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.443500] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc0ffffff]
[ 0.443501] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.443504] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
[ 0.443505] pci_bus 0000:07: resource 1 [mem 0xc1600000-0xc16fffff]
[ 0.443507] pci_bus 0000:07: resource 2 [mem 0xc1400000-0xc14fffff 64bit pref]
[ 0.443509] pci_bus 0000:08: resource 1 [mem 0xc1500000-0xc15fffff]
[ 0.443535] NET: Registered protocol family 2
[ 0.443699] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.443898] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.444024] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.444048] TCP: reno registered
[ 0.444061] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.444091] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.444164] NET: Registered protocol family 1
[ 0.444178] pci 0000:00:02.0: Boot video device
[ 0.476469] PCI: CLS 64 bytes, default 64
[ 0.476542] Trying to unpack rootfs image as initramfs...
[ 0.721735] Freeing initrd memory: 15876k freed
[ 0.723675] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.723680] software IO TLB [mem 0x92cc2000-0x96cc2000] (64MB) mapped at [ffff880092cc2000-ffff880096cc1fff]
[ 0.723717] Simple Boot Flag at 0x44 set to 0x1
[ 0.724078] Initialise module verification
[ 0.724122] audit: initializing netlink socket (disabled)
[ 0.724135] type=2000 audit(1375251782.708:1): initialized
[ 0.750275] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.751478] VFS: Disk quotas dquot_6.5.2
[ 0.751514] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.751894] fuse init (API version 7.20)
[ 0.751951] msgmni has been set to 11694
[ 0.752349] Key type asymmetric registered
[ 0.752351] Asymmetric key parser 'x509' registered
[ 0.752378] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.752402] io scheduler noop registered
[ 0.752404] io scheduler deadline registered (default)
[ 0.752409] io scheduler cfq registered
[ 0.752500] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.752620] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.752631] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.752675] efifb: probing for efifb
[ 0.753175] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90021480000, using 4160k, total 4160k
[ 0.753176] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.753177] efifb: scrolling: redraw
[ 0.753179] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.756190] Console: switching to colour frame buffer device 170x48
[ 0.759016] fb0: EFI VGA frame buffer device
[ 0.759021] intel_idle: MWAIT substates: 0x21120
[ 0.759022] intel_idle: v0.4 model 0x2A
[ 0.759023] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.759107] ACPI: AC Adapter [ACAD] (on-line)
[ 0.759198] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[ 0.759202] ACPI: Power Button [PWRB]
[ 0.759239] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.759314] ACPI: Lid Switch [LID0]
[ 0.759342] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.759344] ACPI: Power Button [PWRF]
[ 0.759389] ACPI: Fan [FAN0] (off)
[ 0.759409] ACPI: Fan [FAN1] (off)
[ 0.759428] ACPI: Fan [FAN2] (off)
[ 0.759447] ACPI: Fan [FAN3] (off)
[ 0.759468] ACPI: Fan [FAN4] (off)
[ 0.759516] ACPI: Requesting acpi_cpufreq
[ 0.881366] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.881369] ACPI: Thermal Zone [TZ00] (60 C)
[ 0.881589] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.881591] ACPI: Thermal Zone [TZ01] (60 C)
[ 0.881639] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.881640] ACPI: Thermal Zone [TZ02] (28 C)
[ 0.881665] GHES: HEST is not enabled!
[ 0.881727] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.083551] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 1.083630] ACPI: Battery Slot [BAT1] (battery present)
[ 1.083716] Linux agpgart interface v0.103
[ 1.084714] brd: module loaded
[ 1.085182] loop: module loaded
[ 1.085427] libphy: Fixed MDIO Bus: probed
[ 1.085472] tun: Universal TUN/TAP device driver, 1.6
[ 1.085474] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.085503] PPP generic driver version 2.4.2
[ 1.085537] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.085538] ehci-pci: EHCI PCI platform driver
[ 1.085575] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 1.085579] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.085583] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.085598] ehci-pci 0000:00:1a.0: debug port 2
[ 1.089500] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.089516] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc1719000
[ 1.099491] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.099541] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.099546] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.099551] usb usb1: Product: EHCI Host Controller
[ 1.099556] usb usb1: Manufacturer: Linux 3.8.0-28-generic ehci_hcd
[ 1.099561] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.099670] hub 1-0:1.0: USB hub found
[ 1.099673] hub 1-0:1.0: 2 ports detected
[ 1.099753] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 1.099757] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.099761] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.099772] ehci-pci 0000:00:1d.0: debug port 2
[ 1.103670] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.103682] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc1718000
[ 1.115468] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.115500] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.115505] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.115510] usb usb2: Product: EHCI Host Controller
[ 1.115516] usb usb2: Manufacturer: Linux 3.8.0-28-generic ehci_hcd
[ 1.115520] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.115620] hub 2-0:1.0: USB hub found
[ 1.115623] hub 2-0:1.0: 2 ports detected
[ 1.115682] ehci-platform: EHCI generic platform driver
[ 1.115689] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.115698] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.115735] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.115739] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.115742] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.115828] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.115872] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[ 1.115913] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.115915] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.115917] usb usb3: Product: xHCI Host Controller
[ 1.115919] usb usb3: Manufacturer: Linux 3.8.0-28-generic xhci_hcd
[ 1.115920] usb usb3: SerialNumber: 0000:00:14.0
[ 1.115972] xHCI xhci_add_endpoint called for root hub
[ 1.115974] xHCI xhci_check_bandwidth called for root hub
[ 1.115989] hub 3-0:1.0: USB hub found
[ 1.115996] hub 3-0:1.0: 4 ports detected
[ 1.116259] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.116262] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.116282] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.116284] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.116285] usb usb4: Product: xHCI Host Controller
[ 1.116287] usb usb4: Manufacturer: Linux 3.8.0-28-generic xhci_hcd
[ 1.116288] usb usb4: SerialNumber: 0000:00:14.0
[ 1.116336] xHCI xhci_add_endpoint called for root hub
[ 1.116337] xHCI xhci_check_bandwidth called for root hub
[ 1.116351] hub 4-0:1.0: USB hub found
[ 1.116358] hub 4-0:1.0: 4 ports detected
[ 1.116679] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.159194] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.159200] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.159299] mousedev: PS/2 mouse device common for all mice
[ 1.162507] rtc_cmos 00:05: RTC can wake from S4
[ 1.162622] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.162650] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.162717] device-mapper: uevent: version 1.0.3
[ 1.162768] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 1.162834] cpuidle: using governor ladder
[ 1.162913] cpuidle: using governor menu
[ 1.162916] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.162918] EFI Variables Facility v0.08 2004-May-17
[ 1.176534] ashmem: initialized
[ 1.176649] TCP: cubic registered
[ 1.176726] NET: Registered protocol family 10
[ 1.176861] NET: Registered protocol family 17
[ 1.176869] Key type dns_resolver registered
[ 1.177067] Loading module verification certificates
[ 1.177935] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 5707af7d8c3f1f0a9542b007a5f82b965f14fbd3'
[ 1.177948] registered taskstats version 1
[ 1.180086] Key type trusted registered
[ 1.181848] Key type encrypted registered
[ 1.183942] rtc_cmos 00:05: setting system clock to 2013-07-31 06:23:03 UTC (1375251783)
[ 1.184557] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.184559] EDD information not available.
[ 1.185968] Freeing unused kernel memory: 996k freed
[ 1.186079] Write protecting the kernel read-only data: 12288k
[ 1.189080] Freeing unused kernel memory: 1168k freed
[ 1.191823] Freeing unused kernel memory: 1076k freed
[ 1.200291] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.204775] udevd[107]: starting version 175
[ 1.207712] Disabling lock debugging due to kernel taint
[ 1.208045] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[ 1.208091] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[ 1.208126] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[ 1.208158] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[ 1.208245] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.233150] rtsx_pci 0000:07:00.0: irq 42 for MSI/MSI-X
[ 1.233169] rtsx_pci 0000:07:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
[ 1.235141] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.235385] r8169 0000:07:00.2: irq 43 for MSI/MSI-X
[ 1.235587] r8169 0000:07:00.2 eth0: RTL8411 at 0xffffc90000074000, 84:34:97:14:24:7b, XID 08800800 IRQ 43
[ 1.235591] r8169 0000:07:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.237582] ahci 0000:00:1f.2: version 3.0
[ 1.237643] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.251327] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl RAID mode
[ 1.251333] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.251340] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.271245] scsi0 : ahci
[ 1.272944] scsi1 : ahci
[ 1.273074] scsi2 : ahci
[ 1.273157] scsi3 : ahci
[ 1.273226] scsi4 : ahci
[ 1.273308] scsi5 : ahci
[ 1.273373] ata1: SATA max UDMA/133 abar m2048@0xc1717000 port 0xc1717100 irq 44
[ 1.273377] ata2: SATA max UDMA/133 abar m2048@0xc1717000 port 0xc1717180 irq 44
[ 1.273380] ata3: SATA max UDMA/133 abar m2048@0xc1717000 port 0xc1717200 irq 44
[ 1.273381] ata4: DUMMY
[ 1.273382] ata5: DUMMY
[ 1.273383] ata6: DUMMY
[ 1.411126] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.543328] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.543339] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.543690] hub 1-1:1.0: USB hub found
[ 1.543779] hub 1-1:1.0: 6 ports detected
[ 1.544072] ACPI Warning: For \_SB_.PCI0.EHC2.HUBN.PR01.PR11._PLD: Return Package has no elements (empty) (20121018/nspredef-463)
[ 1.590852] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.590892] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.592550] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100
[ 1.592561] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.594367] ata1.00: configured for UDMA/100
[ 1.594629] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54757 JE4O PQ: 0 ANSI: 5
[ 1.594757] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.594791] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.594795] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.594821] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.594836] sd 0:0:0:0: [sda] Write Protect is off
[ 1.594838] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.594861] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.596598] ata3.00: ATAPI: hp DVD RAM UJ8C2, 1.00, max UDMA/133
[ 1.597922] ata3.00: configured for UDMA/133
[ 1.600115] scsi 2:0:0:0: CD-ROM hp DVD RAM UJ8C2 1.00 PQ: 0 ANSI: 5
[ 1.604428] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.604436] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.604582] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.604672] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.634159] sda: sda1 sda2 sda3 sda4
[ 1.634609] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.654692] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.718636] tsc: Refined TSC clocksource calibration: 2394.559 MHz
[ 1.718649] Switching to clocksource tsc
[ 1.786907] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.786917] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.787164] hub 2-1:1.0: USB hub found
[ 1.787260] hub 2-1:1.0: 8 ports detected
[ 1.954265] usb 3-4: new full-speed USB device number 2 using xhci_hcd
[ 1.971698] usb 3-4: New USB device found, idVendor=138a, idProduct=0018
[ 1.971708] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 1.971714] usb 3-4: SerialNumber: 47163a54f0d0
[ 2.042149] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 2.191809] usb 1-1.1: New USB device found, idVendor=064e, idProduct=c33c
[ 2.191831] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.191833] usb 1-1.1: Product: HP Truevision HD
[ 2.191834] usb 1-1.1: Manufacturer: SuYin
[ 2.191836] usb 1-1.1: SerialNumber: HF1019-P62A-OV03-REV0201
[ 2.214039] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.333845] usb 1-1.2: new low-speed USB device number 4 using ehci-pci
[ 2.432210] usb 1-1.2: New USB device found, idVendor=045e, idProduct=00a4
[ 2.432220] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.432227] usb 1-1.2: Product: Microsoft(R) Compact Optical Mouse
[ 2.432231] usb 1-1.2: Manufacturer: Microsoft
[ 5.952973] ACPI Error: No handler for Region [RCM0] (ffff8801d60dcb40) [SystemCMOS] (20121018/evregion-376)
[ 5.952979] ACPI Error: Region SystemCMOS (ID=5) has no handler (20121018/exfldio-305)
[ 5.952983] ACPI Error: Method parse/execution failed [\_SB_.WMID.ESDT] (Node ffff8801d60cfb18), AE_NOT_EXIST (20121018/psparse-537)
[ 5.952990] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q42] (Node ffff8801d60f74d8), AE_NOT_EXIST (20121018/psparse-537)
[ 24.840598] Adding 17577980k swap on /dev/sda3. Priority:-1 extents:1 across:17577980k
[ 24.876277] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.988820] udevd[375]: starting version 175
[ 25.417789] type=1400 audit(1375251807.763:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=467 comm="apparmor_parser"
[ 25.417872] type=1400 audit(1375251807.763:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=592 comm="apparmor_parser"
[ 25.418138] type=1400 audit(1375251807.763:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=467 comm="apparmor_parser"
[ 25.418221] type=1400 audit(1375251807.763:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=592 comm="apparmor_parser"
[ 25.418329] type=1400 audit(1375251807.763:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=467 comm="apparmor_parser"
[ 25.418415] type=1400 audit(1375251807.763:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=592 comm="apparmor_parser"
[ 25.495496] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[ 25.495505] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 25.495510] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIX 1 (20121018/utaddress-251)
[ 25.495515] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20121018/utaddress-251)
[ 25.495520] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 3 (20121018/utaddress-251)
[ 25.495524] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 25.495526] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIX 1 (20121018/utaddress-251)
[ 25.495530] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20121018/utaddress-251)
[ 25.495534] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 3 (20121018/utaddress-251)
[ 25.495536] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 25.495537] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 25.514030] wmi: Mapper loaded
[ 25.600957] mei 0000:00:16.0: setting latency timer to 64
[ 25.601026] mei 0000:00:16.0: irq 45 for MSI/MSI-X
[ 25.684181] lp: driver loaded but no devices found
[ 25.693497] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 25.733162] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 25.740905] [drm] Initialized drm 1.1.0 20060810
[ 25.762738] hp_accel: laptop model unknown, using default axes configuration
[ 25.762958] lis3lv02d: unknown sensor type 0x0
[ 25.762988] hp_accel: probe of HPQ0004:00 failed with error -22
[ 25.998695] input: HP WMI hotkeys as /devices/virtual/input/input4
[ 26.043645] [drm] radeon defaulting to kernel modesetting.
[ 26.043648] [drm] radeon kernel modesetting enabled.
[ 26.043660] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 26.043691] checking generic (b0000000 410000) vs hw (a0000000 10000000)
[ 26.043698] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[ 26.043857] [drm] initializing kernel modesetting (TURKS 0x1002:0x6840 0x103C:0x18A5).
[ 26.043892] [drm] register mmio base: 0xC0000000
[ 26.043894] [drm] register mmio size: 131072
[ 26.186287] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 26.373800] cfg80211: Calling CRDA to update world regulatory domain
[ 26.419134] ATOM BIOS: HP/Compal
[ 26.419155] [drm] GPU not posted. posting now...
[ 26.422090] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 26.422094] radeon 0000:01:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 26.433997] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 26.434000] [drm] RAM width 128bits DDR
[ 26.434053] [TTM] Zone kernel: Available graphics memory: 2995514 kiB
[ 26.434056] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 26.434058] [TTM] Initializing pool allocator
[ 26.434063] [TTM] Initializing DMA pool allocator
[ 26.434086] [drm] radeon: 2048M of VRAM memory ready
[ 26.434088] [drm] radeon: 512M of GTT memory ready.
[ 26.434107] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 26.434701] [drm] probing gen 2 caps for device 8086:101 = 2/0
[ 26.434704] [drm] PCIE gen 2 link speeds already enabled
[ 26.434761] [drm] Loading TURKS Microcode
[ 26.480504] cfg80211: World regulatory domain updated:
[ 26.480507] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 26.480509] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 26.480511] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 26.480513] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 26.480514] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 26.480515] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 26.641753] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 26.671108] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 26.671234] radeon 0000:01:00.0: WB enabled
[ 26.671238] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8801941cfc00
[ 26.671240] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8801941cfc0c
[ 26.671242] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 26.671243] [drm] Driver supports precise vblank timestamp query.
[ 26.671276] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[ 26.671287] radeon 0000:01:00.0: radeon: using MSI.
[ 26.671319] [drm] radeon: irq initialized.
[ 26.687676] [drm] ring test on 0 succeeded in 1 usecs
[ 26.687738] [drm] ring test on 3 succeeded in 1 usecs
[ 26.688036] [drm] ib test on ring 0 succeeded in 0 usecs
[ 26.688088] [drm] ib test on ring 3 succeeded in 0 usecs
[ 26.688313] [drm] Radeon Display Connectors
[ 26.693570] [drm] Internal thermal controller with fan control
[ 26.694410] [drm] radeon: power management initialized
[ 26.694560] radeon 0000:01:00.0: No connectors reported connected with modes
[ 26.694562] [drm] Cannot find any crtc or sizes - going 1024x768
[ 26.695500] [drm] fb mappable at 0xA0142000
[ 26.695501] [drm] vram apper at 0xA0000000
[ 26.695502] [drm] size 3145728
[ 26.695503] [drm] fb depth is 24
[ 26.695504] [drm] pitch is 4096
[ 26.695507] checking generic (b0000000 410000) vs hw (a0000000 10000000)
[ 26.695567] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[ 26.695571] radeon 0000:01:00.0: registered panic notifier
[ 26.695585] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0
[ 26.696234] [drm] Memory usable by graphics device = 2048M
[ 26.696239] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[ 26.696241] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 26.696275] Console: switching to colour dummy device 80x25
[ 26.696441] i915 0000:00:02.0: setting latency timer to 64
[ 26.731467] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 26.731475] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 26.731477] [drm] Driver supports precise vblank timestamp query.
[ 26.731536] vga_switcheroo: enabled
[ 26.731608] ATPX version 1
[ 26.731689] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 26.731692] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 26.826062] usbcore: registered new interface driver usbhid
[ 26.826066] usbhid: USB HID core driver
[ 26.838215] Linux video capture interface: v2.00
[ 26.870157] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
[ 26.870319] hid-generic 0003:045E:00A4.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[ 26.949679] fbcon: inteldrmfb (fb0) is primary device
[ 27.005192] uvcvideo: Found UVC 1.00 device HP Truevision HD (064e:c33c)
[ 27.013664] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input6
[ 27.013767] usbcore: registered new interface driver uvcvideo
[ 27.013768] USB Video Class driver (1.1.1)
[ 27.263797] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x26c00, board id: 2054, fw id: 1196324
[ 27.394536] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 27.596133] Console: switching to colour frame buffer device 170x48
[ 27.599021] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 27.599191] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 27.600336] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff88019440a120 (20121018/exresop-422)
[ 27.600342] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20121018/dswexec-460)
[ 27.600346] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.DD02._BCM] (Node ffff8801d60db7d0), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 27.600351] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCM] (Node ffff8801d6113c08), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 27.600356] ACPI Error: Evaluating _BCM failed (20121018/video-372)
[ 27.600472] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 27.600524] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:37/LNXVIDEO:00/input/input8
[ 27.600595] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 27.601773] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff88019440a828 (20121018/exresop-422)
[ 27.601779] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20121018/dswexec-460)
[ 27.601784] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.DD02._BCM] (Node ffff8801d60db7d0), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 27.601792] ACPI Error: Evaluating _BCM failed (20121018/video-372)
[ 27.601985] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 27.602048] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input9
[ 27.602123] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
[ 27.602240] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 28.118177] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 28.655109] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 28.707011] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 28.707146] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 28.707253] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 28.758588] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 28.848123] init: failsafe main process (1123) killed by TERM signal
[ 29.206272] Bluetooth: Core ver 2.16
[ 29.206291] NET: Registered protocol family 31
[ 29.206293] Bluetooth: HCI device and connection manager initialized
[ 29.206301] Bluetooth: HCI socket layer initialized
[ 29.206304] Bluetooth: L2CAP socket layer initialized
[ 29.206311] Bluetooth: SCO socket layer initialized
[ 29.248789] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 29.248793] Bluetooth: BNEP filters: protocol multicast
[ 29.248802] Bluetooth: BNEP socket layer initialized
[ 29.286389] Bluetooth: RFCOMM TTY layer initialized
[ 29.286402] Bluetooth: RFCOMM socket layer initialized
[ 29.286404] Bluetooth: RFCOMM ver 1.11
[ 29.441148] init: avahi-cups-reload main process (1172) terminated with status 1
[ 29.457877] type=1400 audit(1375251811.811:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1210 comm="apparmor_parser"
[ 29.457974] type=1400 audit(1375251811.811:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1211 comm="apparmor_parser"
[ 29.458176] type=1400 audit(1375251811.811:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1210 comm="apparmor_parser"
[ 29.458463] type=1400 audit(1375251811.811:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1211 comm="apparmor_parser"
[ 29.470471] ppdev: user-space parallel port driver
[ 29.979387] r8169 0000:07:00.2 eth0: link down
[ 29.979432] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.979812] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.308179] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.308512] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 32.514475] wlan0: authenticate with 00:24:d4:d4:78:b4
[ 32.520853] wlan0: send auth to 00:24:d4:d4:78:b4 (try 1/3)
[ 32.523231] wlan0: authenticated
[ 32.524682] wlan0: associate with 00:24:d4:d4:78:b4 (try 1/3)
[ 32.527449] wlan0: RX AssocResp from 00:24:d4:d4:78:b4 (capab=0x411 status=0 aid=3)
[ 32.527699] wlan0: associated
[ 32.527719] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 33.626002] postgres (1725): /proc/1725/oom_adj is deprecated, please use /proc/1725/oom_score_adj instead.
[ 38.963855] Non-volatile memory driver v1.3
[ 44.854324] radeon: switched off
[ 44.936560] init: plymouth-stop pre-start process (2394) terminated with status 1Pour la seconde je regarde le bios
[ Modéré ]
Hors ligne
#25 Le 31/07/2013, à 08:35
- F50
Re : Xubuntu 13.04 boot lent
Petite l'amélioration... Essaye de désactiver l'IPv6 comme dit au point 5.2 ici (ça peut aider):