Ubuntu-fr

Logo1

[resolu] lecteurs/graveurs DVD pas reconnus

Salut

Mes lecteurs de DVD ne sont pas reconnus sous gusty. J'ai du faire l'installation avec la netinstall (http://forum.ubuntu-fr.org/viewtopic.php?id=141473) et apres avoir longuement chercher je ne parviens toujours pas a les monter.

Voici mon fichier fstab :

proc /proc proc defaults 0 0
# Entry for /dev/sdb1 :
UUID=c63409b7-bf97-469c-8fff-dae4944b83e5 / ext3 defaults,errors=remount-ro 0 1
# Entry for /dev/sda1 :
UUID=0E167D1F167D08CB /media/sdd1 ntfs-3g defaults,locale=fr_FR.UTF-8 0 1
# Entry for /dev/sda2 :
UUID=2ED09AD6D09AA41D /media/sdd2 ntfs-3g defaults,locale=fr_FR.UTF-8 0 1
# Entry for /dev/sdb5 :
UUID=084F0899B41155B2 /media/sde5 ntfs-3g defaults,locale=fr_FR.UTF-8 0 1
# Entry for /dev/sdb6 :
UUID=B2DB837EA91E7ECB /media/sde6 ntfs-3g defaults,locale=fr_FR.UTF-8 0 1
# Entry for /dev/sdb7 :
UUID=A9FFE7988CD8300A /media/sde7 ntfs-3g defaults,locale=fr_FR.UTF-8 0 1
# Entry for /dev/sdb8 :
UUID=8cbb68f5-6df6-4c60-8a5a-9005f3c0187a none swap sw 0 0


/dev/scd0       /media/cdrom0   udf,iso9660 user,noauto     0       0
/dev/scd1       /media/cdrom1   udf,iso9660 user,noauto     0       0

#/dev/hdc        /media/cdrom0   udf,iso9660 ro,user,noauto  0       0
#/dev/hdd /media/cdrom1 udf,iso9660 user,noauto 0 0

#/dev/hda /media/cdrom0 udf,iso9660 user,atime,noauto,rw,dev,exec,suid 0 0

(les lignes commentées ne fonctionnent pas mieux une fois décommentées)

voici ce que donne lshw :

logo@ubu:~$ lshw
WARNING: you should run this program as super-user.
ubu                       
    description: Computer
    width: 32 bits
  *-core
       description: Motherboard
       physical id: 0
     *-memory
          description: System memory
          physical id: 0
          size: 3041MB
     *-cpu
          product: Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz
          vendor: Intel Corp.
          physical id: 1
          bus info: cpu@0
          version: 6.15.7
          serial: 0000-06F7-0000-0000-0000-0000
          size: 1600MHz
          capacity: 1600MHz
          width: 64 bits
          capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx x86-64 constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm cpufreq
          configuration: id=1
        *-logicalcpu:0
             description: Logical CPU
             physical id: 1.1
             width: 64 bits
             capabilities: logical
        *-logicalcpu:1
             description: Logical CPU
             physical id: 1.2
             width: 64 bits
             capabilities: logical
        *-logicalcpu:2
             description: Logical CPU
             physical id: 1.3
             width: 64 bits
             capabilities: logical
        *-logicalcpu:3
             description: Logical CPU
             physical id: 1.4
             width: 64 bits
             capabilities: logical
     *-pci
          description: Host bridge
          product: Intel Corporation
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 02
          width: 32 bits
          clock: 33MHz
        *-pci:0
             description: PCI bridge
             product: Intel Corporation
             vendor: Intel Corporation
             physical id: 1
             bus info: pci@0000:00:01.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
           *-display
                description: VGA compatible controller
                product: nVidia Corporation
                vendor: nVidia Corporation
                physical id: 0
                bus info: pci@0000:01:00.0
                version: a2
                width: 64 bits
                clock: 33MHz
                capabilities: vga bus_master cap_list
                configuration: driver=nvidia latency=0 module=nvidia
        *-network
             description: Ethernet interface
             product: Intel Corporation
             vendor: Intel Corporation
             physical id: 19
             bus info: pci@0000:00:19.0
             logical name: eth0
             version: 02
             serial: 00:19:db:c6:f6:21
             width: 32 bits
             clock: 33MHz
             capabilities: bus_master cap_list ethernet physical
             configuration: broadcast=yes driver=e1000-ich9 driverversion=7.6.5-NAPI firmware=1.3-0 ip=192.168.1.3 latency=0 module=e1000_ich9 multicast=yes
        *-usb:0
             description: USB Controller
             product: Intel Corporation
             vendor: Intel Corporation
             physical id: 1a
             bus info: pci@0000:00:1a.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master cap_list
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:1
             description: USB Controller
             product: Intel Corporation
             vendor: Intel Corporation
             physical id: 1a.1
             bus info: pci@0000:00:1a.1
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master cap_list
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:2
             description: USB Controller
             product: Intel Corporation
             vendor: Intel Corporation
             physical id: 1a.2
             bus info: pci@0000:00:1a.2
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master cap_list
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:3
             description: USB Controller
             product: Intel Corporation
             vendor: Intel Corporation
             physical id: 1a.7
             bus info: pci@0000:00:1a.7
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: ehci bus_master cap_list
             configuration: driver=ehci_hcd latency=0 module=ehci_hcd
        *-multimedia
             description: Audio device
             product: Intel Corporation
             vendor: Intel Corporation
             physical id: 1b
             bus info: pci@0000:00:1b.0
             version: 02
             width: 64 bits
             clock: 33MHz
             capabilities: bus_master cap_list
             configuration: driver=HDA Intel latency=0 module=snd_hda_intel
        *-pci:1
             description: PCI bridge
             product: Intel Corporation
             vendor: Intel Corporation
             physical id: 1c
             bus info: pci@0000:00:1c.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
        *-pci:2
             description: PCI bridge
             product: Intel Corporation
             vendor: Intel Corporation
             physical id: 1c.4
             bus info: pci@0000:00:1c.4
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
           *-ide UNCLAIMED
                description: IDE interface
                product: Marvell Technology Group Ltd.
                vendor: Marvell Technology Group Ltd.
                physical id: 0
                bus info: pci@0000:03:00.0
                version: b1
                width: 32 bits
                clock: 33MHz
                capabilities: ide bus_master cap_list
                configuration: latency=0
        *-usb:4
             description: USB Controller
             product: Intel Corporation
             vendor: Intel Corporation
             physical id: 1d
             bus info: pci@0000:00:1d.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master cap_list
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:5
             description: USB Controller
             product: Intel Corporation
             vendor: Intel Corporation
             physical id: 1d.1
             bus info: pci@0000:00:1d.1
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master cap_list
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:6
             description: USB Controller
             product: Intel Corporation
             vendor: Intel Corporation
             physical id: 1d.2
             bus info: pci@0000:00:1d.2
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master cap_list
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:7
             description: USB Controller
             product: Intel Corporation
             vendor: Intel Corporation
             physical id: 1d.7
             bus info: pci@0000:00:1d.7
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: ehci bus_master cap_list
             configuration: driver=ehci_hcd latency=0 module=ehci_hcd
        *-pci:3
             description: PCI bridge
             product: 82801 PCI Bridge
             vendor: Intel Corporation
             physical id: 1e
             bus info: pci@0000:00:1e.0
             version: 92
             width: 32 bits
             clock: 33MHz
             capabilities: pci subtractive_decode bus_master cap_list
           *-firewire
                description: FireWire (IEEE 1394)
                product: IEEE 1394 Host Controller
                vendor: VIA Technologies, Inc.
                physical id: 2
                bus info: pci@0000:04:02.0
                version: c0
                width: 32 bits
                clock: 33MHz
                capabilities: ohci bus_master cap_list
                configuration: driver=ohci1394 latency=64 maxlatency=32 module=ohci1394
        *-isa
             description: ISA bridge
             product: Intel Corporation
             vendor: Intel Corporation
             physical id: 1f
             bus info: pci@0000:00:1f.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master cap_list
             configuration: latency=0
        *-storage
             description: RAID bus controller
             product: 82801HR/HO/HH (ICH8R/DO/DH) SATA RAID Controller
             vendor: Intel Corporation
             physical id: 1f.2
             bus info: pci@0000:00:1f.2
             version: 02
             width: 32 bits
             clock: 66MHz
             capabilities: storage bus_master cap_list
             configuration: driver=ahci latency=0 module=ahci
        *-serial UNCLAIMED
             description: SMBus
             product: Intel Corporation
             vendor: Intel Corporation
             physical id: 1f.3
             bus info: pci@0000:00:1f.3
             version: 02
             width: 64 bits
             clock: 33MHz
             configuration: latency=0
  *-scsi
       physical id: 1
       bus info: scsi@6
       logical name: scsi6
       capabilities: scsi-host
       configuration: driver=usb-storage

Pour le moment l'erreur quand j'essaies d'accéder au lecteur  est : Impossible de monter le volume sélectionné.
mount: /dev/scd0 is not a block device

Les graveurs sont :
1 - graveur LG GSA L42  N
2 - graveur philips (je ne sais plus quel modéle mais fonctionnait tres bien avec mon ancien PC sous Feisty)

Mon PC est un medion 6526.
Comment faire pour faire reconnaitre ce matériel ?

Merci. A+

Dernière modification par Logo1 (Le 28/09/2007, à 23:32)

elapouya

Re : [resolu] lecteurs/graveurs DVD pas reconnus

Peut-etre qu'une piste serait de remplacer le lecteur de DVD-ROM par un Graveur DVD SATA et non IDE...

Logo1

Re : [resolu] lecteurs/graveurs DVD pas reconnus

Salut elapouya

J'y ai pensé, mais j ca m'embete un peu de racheter un lecteur.
As tu installé ubuntu sur ton PC ?

elapouya

Re : [resolu] lecteurs/graveurs DVD pas reconnus

Non, je ne l'ai pas installé, si je ne peux pas voir mes lecteurs après une netinstall, je trouve que cela bride pas mal linux...

Par contre je pense que je vais peut-etre m'acheter un graveur SATA, le pionneer DVR 212BK (35 euros chez grosbill.com), il parait qu'il est vu par ubuntu. Je vais démonter mon PC pour voir s'il y a un port SATA de libre... j'espère qu'il n'y a rien à configurer en SATA car le hardware et moi, cela fait 2.
Il faut que je regarde aussi dans le BIOS si on peut faire booter le DVDROM SATA avant le Raid SATA...

En plus, cela résoudra un autre pb du médion : le lecteur de dvd-rom est d'une lenteur effrayante : il est annoncé en 16x, mais il ne fait que du 4x au début du DVD et 8x en fin de DVD (dixit nero speed)...
du coup, pour faire de la copie drive à drive en direct c'est possible qu'en toute petite vitesse (le graveur LG etant cappable de graver 2x plus vite ce que le lecteur DVD est cappable de lire, un comble !)

XavierP56

Re : [resolu] lecteurs/graveurs DVD pas reconnus

Bon, ca me bloque un peu sur l'achat du Medion ça...
Alors procédons par ordre:
dmesg
mount /dev/scd0 ...
dmesg

Que dit le kernel ? As-tu recompilé un kernel en activant différents controleurs SATA / PATA ?

elapouya

Re : [resolu] lecteurs/graveurs DVD pas reconnus

Je suis en train de me faire une Clef USB bootable (mettre le boot.img sur la clef via NTRawrite + syslinux pour la rendre bootable + mettre le fichier iso d'ubuntu à la racine d'une partition FAT32)

Pour l'instant, le bios ne boote pas dessus bien que je demande à booter USB disk dans les préférence de boot...

Logo1

Re : [resolu] lecteurs/graveurs DVD pas reconnus

Salut XavierP56

Voici le résultat des différentes commandes :

dmesg =

[   28.118152] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[   28.118156] hpet0: 4 64-bit timers, 14318180 Hz
[   28.198979] Calibrating delay using timer specific routine.. 4788.41 BogoMIPS (lpj=9576834)
[   28.198996] Security Framework v1.0.0 initialized
[   28.199002] SELinux:  Disabled at boot.
[   28.199011] Mount-cache hash table entries: 512
[   28.199112] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[   28.199118] monitor/mwait feature present.
[   28.199119] using mwait in idle threads.
[   28.199123] CPU: L1 I cache: 32K, L1 D cache: 32K
[   28.199125] CPU: L2 cache: 4096K
[   28.199126] CPU: Physical Processor ID: 0
[   28.199128] CPU: Processor Core ID: 0
[   28.199129] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[   28.199136] Compat vDSO mapped to ffffe000.
[   28.199146] Checking 'hlt' instruction... OK.
[   28.215047] SMP alternatives: switching to UP code
[   28.215409] Early unpacking initramfs... done
[   28.442308] ACPI: Core revision 20070126
[   28.442341] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   28.446098] CPU0: Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07
[   28.446109] SMP alternatives: switching to SMP code
[   28.446166] Booting processor 1/1 eip 3000
[   28.456470] Initializing CPU#1
[   28.809535] Calibrating delay using timer specific routine.. 4416.75 BogoMIPS (lpj=8833515)
[   28.809540] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[   28.809543] monitor/mwait feature present.
[   28.809545] CPU: L1 I cache: 32K, L1 D cache: 32K
[   28.809547] CPU: L2 cache: 4096K
[   28.809548] CPU: Physical Processor ID: 0
[   28.809549] CPU: Processor Core ID: 1
[   28.809550] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[   28.810167] CPU1: Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07
[   28.810187] SMP alternatives: switching to SMP code
[   28.810248] Booting processor 2/2 eip 3000
[   28.820495] Initializing CPU#2
[   28.897328] Calibrating delay using timer specific routine.. 4785.03 BogoMIPS (lpj=9570062)
[   28.897332] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[   28.897336] monitor/mwait feature present.
[   28.897338] CPU: L1 I cache: 32K, L1 D cache: 32K
[   28.897340] CPU: L2 cache: 4096K
[   28.897341] CPU: Physical Processor ID: 0
[   28.897342] CPU: Processor Core ID: 2
[   28.897343] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[   28.897942] CPU2: Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07
[   28.897951] SMP alternatives: switching to SMP code
[   28.897963] Booting processor 3/3 eip 3000
[   28.908210] Initializing CPU#3
[   28.985120] Calibrating delay using timer specific routine.. 4785.04 BogoMIPS (lpj=9570097)
[   28.985125] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[   28.985128] monitor/mwait feature present.
[   28.985131] CPU: L1 I cache: 32K, L1 D cache: 32K
[   28.985132] CPU: L2 cache: 4096K
[   28.985134] CPU: Physical Processor ID: 0
[   28.985134] CPU: Processor Core ID: 3
[   28.985136] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[   28.985761] CPU3: Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07
[   28.985775] Total of 4 processors activated (18775.25 BogoMIPS).
[   28.985912] ENABLING IO-APIC IRQs
[   28.986070] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   29.132830] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   29.152813] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[   29.172801] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[   29.192769] Brought up 4 CPUs
[   29.704975] migration_cost=69,3863
[   29.705124] Booting paravirtualized kernel on bare hardware
[   29.705173] Time: 14:05:20  Date: 08/09/107
[   29.705189] NET: Registered protocol family 16
[   29.705247] EISA bus registered
[   29.705250] ACPI: bus type pci registered
[   29.706039] PCI: PCI BIOS revision 3.00 entry at 0xfa280, last bus=4
[   29.706040] PCI: Using configuration type 1
[   29.706041] Setting up standard PCI resources
[   29.707054] mtrr: your CPUs had inconsistent fixed MTRR settings
[   29.707055] mtrr: probably your BIOS does not setup all CPUs.
[   29.707056] mtrr: corrected configuration.
[   29.708121] ACPI: EC: Look up EC in DSDT
[   29.711349] ACPI: Interpreter enabled
[   29.711351] ACPI: (supports S0 S3 S4 S5)
[   29.711368] ACPI: Using IOAPIC for interrupt routing
[   29.715649] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   29.715656] PCI: Probing PCI hardware (bus 00)
[   29.716735] PCI: Transparent bridge - 0000:00:1e.0
[   29.716778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   29.716890] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[   29.716951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[   29.717008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[   29.728613] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[   29.728692] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[   29.728771] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15)
[   29.728848] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[   29.728925] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[   29.729002] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[   29.729079] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[   29.729157] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[   29.729252] Linux Plug and Play Support v0.97 (c) Adam Belay
[   29.729259] pnp: PnP ACPI init
[   29.729264] ACPI: bus type pnp registered
[   29.731009] pnp: PnP ACPI: found 13 devices
[   29.731011] ACPI: ACPI bus type pnp unregistered
[   29.731014] PnPBIOS: Disabled by ACPI PNP
[   29.731043] PCI: Using ACPI for IRQ routing
[   29.731045] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   29.755683] NET: Registered protocol family 8
[   29.755684] NET: Registered protocol family 20
[   29.755805] pnp: 00:09: ioport range 0x400-0x4bf has been reserved
[   29.755809] pnp: 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
[   29.755813] pnp: 00:0c: iomem range 0xf0000-0xfffff could not be reserved
[   29.755815] pnp: 00:0c: iomem range 0xbff00000-0xbfffffff has been reserved
[   29.755817] pnp: 00:0c: iomem range 0xfed00000-0xfed000ff could not be reserved
[   29.755819] pnp: 00:0c: iomem range 0xbfe90000-0xbfefffff could not be reserved
[   29.757185] Time: tsc clocksource has been installed.
[   29.757191] Switched to high resolution mode on CPU 0
[   29.757247] Switched to high resolution mode on CPU 1
[   29.760425] Switched to high resolution mode on CPU 2
[   29.760475] Switched to high resolution mode on CPU 3
[   29.786098] PCI: Bridge: 0000:00:01.0
[   29.786100]   IO window: d000-dfff
[   29.786103]   MEM window: f8000000-fbffffff
[   29.786106]   PREFETCH window: d0000000-dfffffff
[   29.786108] PCI: Bridge: 0000:00:1c.0
[   29.786110]   IO window: c000-cfff
[   29.786114]   MEM window: fde00000-fdefffff
[   29.786117]   PREFETCH window: fdb00000-fdbfffff
[   29.786120] PCI: Bridge: 0000:00:1c.4
[   29.786122]   IO window: b000-bfff
[   29.786126]   MEM window: fda00000-fdafffff
[   29.786129]   PREFETCH window: fd900000-fd9fffff
[   29.786132] PCI: Bridge: 0000:00:1e.0
[   29.786134]   IO window: a000-afff
[   29.786138]   MEM window: fdd00000-fddfffff
[   29.786141]   PREFETCH window: fdc00000-fdcfffff
[   29.786151] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   29.786155] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   29.786168] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   29.786172] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   29.786184] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[   29.786188] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   29.786196] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   29.786203] NET: Registered protocol family 2
[   29.832983] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   29.833026] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[   29.833570] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   29.833739] TCP: Hash tables configured (established 131072 bind 65536)
[   29.833741] TCP reno registered
[   29.849064] checking if image is initramfs... it is
[   30.297044] Freeing initrd memory: 7062k freed
[   30.297866] audit: initializing netlink socket (disabled)
[   30.297876] audit(1189346720.708:1): initialized
[   30.298032] highmem bounce pool size: 64 pages
[   30.299665] VFS: Disk quotas dquot_6.5.1
[   30.299715] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   30.299800] io scheduler noop registered
[   30.299802] io scheduler anticipatory registered
[   30.299804] io scheduler deadline registered
[   30.299817] io scheduler cfq registered (default)
[   30.299939] Boot video device is 0000:01:00.0
[   30.300025] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   30.300060] assign_interrupt_mode Found MSI capability
[   30.300088] Allocate Port Service[0000:00:01.0:pcie00]
[   30.300176] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   30.300209] assign_interrupt_mode Found MSI capability
[   30.300235] Allocate Port Service[0000:00:1c.0:pcie00]
[   30.300257] Allocate Port Service[0000:00:1c.0:pcie02]
[   30.300316] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   30.300348] assign_interrupt_mode Found MSI capability
[   30.300374] Allocate Port Service[0000:00:1c.4:pcie00]
[   30.300399] Allocate Port Service[0000:00:1c.4:pcie02]
[   30.300528] isapnp: Scanning for PnP cards...
[   30.652618] isapnp: No Plug & Play device found
[   30.667491] Real Time Clock Driver v1.12ac
[   30.667617] hpet_resources: 0xfed00000 is busy
[   30.667661] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   30.668085] 00:07: ttyS0 at I/O 0x2f8 (irq = 3) is a 16550A
[   30.668575] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   30.668664] input: Macintosh mouse button emulation as /class/input/input0
[   30.668719] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   30.668721] PNP: PS/2 controller doesn't have AUX irq; using default 12
[   30.671025] serio: i8042 KBD port at 0x60,0x64 irq 1
[   30.671028] serio: i8042 AUX port at 0x60,0x64 irq 12
[   30.671116] mice: PS/2 mouse device common for all mice
[   30.671212] EISA: Probing bus 0 at eisa.0
[   30.671236] EISA: Detected 0 cards.
[   30.671297] TCP cubic registered
[   30.671307] NET: Registered protocol family 1
[   30.671320] Using IPI No-Shortcut mode
[   30.671435]   Magic number: 7:690:80
[   30.671593] Freeing unused kernel memory: 364k freed
[   30.689705] input: AT Translated Set 2 keyboard as /class/input/input1
[   31.834863] AppArmor: AppArmor initialized
[   31.834868] audit(1189346722.208:2): AppArmor initialized
[   31.834869] 
[   31.840466] fuse init (API version 7.8)
[   31.844566] AppArmor: Registered secondary security module: capability.
[   31.844568] Capability LSM initialized as secondary
[   31.847023] ACPI: Fan [FAN] (on)
[   31.850170] ACPI: SSDT BFEE7B80, 022A (r1  PmRef  Cpu0Ist     3000 INTL 20041203)
[   31.850364] ACPI: SSDT BFEE8040, 0152 (r1  PmRef  Cpu1Ist     3000 INTL 20041203)
[   31.850532] ACPI: SSDT BFEE81A0, 0152 (r1  PmRef  Cpu2Ist     3000 INTL 20041203)
[   31.850701] ACPI: SSDT BFEE8300, 0152 (r1  PmRef  Cpu3Ist     3000 INTL 20041203)
[   31.851473] ACPI: Thermal Zone [THRM] (22 C)
[   32.124456] usbcore: registered new interface driver usbfs
[   32.124473] usbcore: registered new interface driver hub
[   32.125091] usbcore: registered new device driver usb
[   32.125628] USB Universal Host Controller Interface driver v3.0
[   32.125677] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[   32.125686] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[   32.125689] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   32.125780] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[   32.125804] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
[   32.125880] usb usb1: configuration #1 chosen from 1 choice
[   32.125900] hub 1-0:1.0: USB hub found
[   32.125904] hub 1-0:1.0: 2 ports detected
[   32.167923] SCSI subsystem initialized
[   32.175478] libata version 2.21 loaded.
[   32.227738] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 17
[   32.227750] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[   32.227753] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   32.227792] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 2
[   32.227816] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[   32.227824] ehci_hcd 0000:00:1a.7: irq 17, io mem 0xfdffe000
[   32.231687] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   32.231765] usb usb2: configuration #1 chosen from 1 choice
[   32.231782] hub 2-0:1.0: USB hub found
[   32.231786] hub 2-0:1.0: 6 ports detected
[   32.335474] ahci 0000:00:1f.2: version 2.2
[   32.335495] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 18
[   32.578488] usb 2-4: new high speed USB device using ehci_hcd and address 2
[   32.792342] usb 2-4: configuration #1 chosen from 1 choice
[   33.337163] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[   33.337168] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pmp pio slum part 
[   33.337174] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   33.337427] scsi0 : ahci
[   33.337474] scsi1 : ahci
[   33.337515] scsi2 : ahci
[   33.337542] scsi3 : ahci
[   33.337564] scsi4 : ahci
[   33.337588] scsi5 : ahci
[   33.337605] ata1: SATA max UDMA/133 cmd 0xf888c100 ctl 0x00000000 bmdma 0x00000000 irq 220
[   33.337607] ata2: SATA max UDMA/133 cmd 0xf888c180 ctl 0x00000000 bmdma 0x00000000 irq 220
[   33.337609] ata3: SATA max UDMA/133 cmd 0xf888c200 ctl 0x00000000 bmdma 0x00000000 irq 220
[   33.337612] ata4: SATA max UDMA/133 cmd 0xf888c280 ctl 0x00000000 bmdma 0x00000000 irq 220
[   33.337614] ata5: SATA max UDMA/133 cmd 0xf888c300 ctl 0x00000000 bmdma 0x00000000 irq 220
[   33.337617] ata6: SATA max UDMA/133 cmd 0xf888c380 ctl 0x00000000 bmdma 0x00000000 irq 220
[   33.647955] ata1: SATA link down (SStatus 0 SControl 300)
[   33.963208] ata2: SATA link down (SStatus 0 SControl 300)
[   34.450054] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   34.458396] ata3.00: ATA-7: WDC WD5000AAJS-00TKA0, 12.01C01, max UDMA/133
[   34.458400] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   34.459198] ata3.00: configured for UDMA/133
[   34.944922] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   34.959950] ata4.00: ATA-7: WDC WD5000AAJS-00TKA0, 12.01C01, max UDMA/133
[   34.959954] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   34.960754] ata4.00: configured for UDMA/133
[   35.268114] ata5: SATA link down (SStatus 0 SControl 300)
[   35.579377] ata6: SATA link down (SStatus 0 SControl 300)
[   35.579474] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAJS-0 12.0 PQ: 0 ANSI: 5
[   35.579582] scsi 3:0:0:0: Direct-Access     ATA      WDC WD5000AAJS-0 12.0 PQ: 0 ANSI: 5
[   35.580760] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[   35.580769] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   35.580771] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   35.580792] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[   35.580813] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   35.580819] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfdffd000
[   35.584703] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   35.584764] usb usb3: configuration #1 chosen from 1 choice
[   35.584783] hub 3-0:1.0: USB hub found
[   35.584787] hub 3-0:1.0: 6 ports detected
[   35.585104] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   35.585112] sd 2:0:0:0: [sda] Write Protect is off
[   35.585114] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   35.585124] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   35.585155] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   35.585161] sd 2:0:0:0: [sda] Write Protect is off
[   35.585163] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   35.585174] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   35.585176]  sda: sda1 sda2
[   35.593790] sd 2:0:0:0: [sda] Attached SCSI disk
[   35.593830] sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   35.593839] sd 3:0:0:0: [sdb] Write Protect is off
[   35.593841] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   35.593856] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   35.593891] sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   35.593900] sd 3:0:0:0: [sdb] Write Protect is off
[   35.593902] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   35.593916] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   35.593919]  sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 >
[   35.651952] sd 3:0:0:0: [sdb] Attached SCSI disk
[   35.654926] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   35.654941] sd 3:0:0:0: Attached scsi generic sg1 type 0
[   35.687275] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 18 (level, low) -> IRQ 17
[   35.687284] PCI: Setting latency timer of device 0000:04:02.0 to 64
[   35.695094] ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 20
[   35.695101] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[   35.695104] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   35.695138] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[   35.695164] uhci_hcd 0000:00:1a.1: irq 20, io base 0x0000fd00
[   35.695243] usb usb4: configuration #1 chosen from 1 choice
[   35.695262] hub 4-0:1.0: USB hub found
[   35.695266] hub 4-0:1.0: 2 ports detected
[   35.735856] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[fddff000-fddff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   35.798956] ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 18
[   35.798967] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[   35.798971] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[   35.798993] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[   35.799019] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fc00
[   35.799124] usb usb5: configuration #1 chosen from 1 choice
[   35.799140] hub 5-0:1.0: USB hub found
[   35.799144] hub 5-0:1.0: 2 ports detected
[   35.902684] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[   35.902692] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   35.902696] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   35.902718] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[   35.902740] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000fb00
[   35.902837] usb usb6: configuration #1 chosen from 1 choice
[   35.902876] hub 6-0:1.0: USB hub found
[   35.902880] hub 6-0:1.0: 2 ports detected
[   36.006490] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 18
[   36.006497] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   36.006500] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   36.006517] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[   36.006536] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000fa00
[   36.006605] usb usb7: configuration #1 chosen from 1 choice
[   36.006622] hub 7-0:1.0: USB hub found
[   36.006626] hub 7-0:1.0: 2 ports detected
[   36.037229] kjournald starting.  Commit interval 5 seconds
[   36.037240] EXT3-fs: mounted filesystem with ordered data mode.
[   36.054320] usbcore: registered new interface driver libusual
[   36.058303] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   36.058306] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   36.059473] Initializing USB Mass Storage driver...
[   36.059558] scsi6 : SCSI emulation for USB Mass Storage devices
[   36.059613] usb-storage: device found at 2
[   36.059615] usb-storage: waiting for device to settle before scanning
[   36.110223] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
[   36.110232] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   36.110236] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   36.110259] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[   36.110282] uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000f900
[   36.110395] usb usb8: configuration #1 chosen from 1 choice
[   36.110412] hub 8-0:1.0: USB hub found
[   36.110416] hub 8-0:1.0: 2 ports detected
[   36.293730] usb 6-2: new full speed USB device using uhci_hcd and address 2
[   36.480485] usb 6-2: configuration #1 chosen from 1 choice
[   36.487574] usbcore: registered new interface driver usb-storage
[   36.487578] USB Mass Storage support registered.
[   37.016087] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc00012298f1]
[   41.051888] usb-storage: device scan complete
[   41.056134] scsi 6:0:0:0: Direct-Access     Generic  Flash HS-CF      4.55 PQ: 0 ANSI: 0
[   41.059260] scsi 6:0:0:1: Direct-Access     Generic  Flash HS-MS/SD   4.55 PQ: 0 ANSI: 0
[   41.062359] scsi 6:0:0:2: Direct-Access     Generic  Flash HS-SM      4.55 PQ: 0 ANSI: 0
[   41.070374] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[   41.070405] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   41.118253] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[   41.118281] sd 6:0:0:1: Attached scsi generic sg3 type 0
[   41.122240] sd 6:0:0:2: [sde] Attached SCSI removable disk
[   41.122264] sd 6:0:0:2: Attached scsi generic sg4 type 0
[   41.479164] Linux agpgart interface v0.102 (c) Dave Jones
[   41.540128] Intel(R) PRO/1000 Network Driver - version 7.6.5-NAPI
[   41.540130] Copyright (c) 1999-2007 Intel Corporation.
[   41.540178] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 21
[   41.540188] PCI: Setting latency timer of device 0000:00:19.0 to 64
[   41.544778] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   41.585822] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:db:c6:f6:21
[   41.655039] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[   41.655125] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   41.693114] input: PC Speaker as /class/input/input2
[   41.787710] usbcore: registered new interface driver xpad
[   41.787716] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[   41.787719] usbcore: registered new interface driver hiddev
[   41.790911] input: Logitech USB Gaming Mouse as /class/input/input3
[   41.790944] input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.0-2
[   41.796710] hiddev96: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.0-2
[   41.796720] usbcore: registered new interface driver usbhid
[   41.796723] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   41.916914] nvidia: module license 'NVIDIA' taints kernel.
[   42.167199] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   42.167210] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   42.168405] NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.11  Wed Jun 13 18:21:22 PDT 2007
[   42.274658] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[   42.274674] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   42.479032] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   42.693556] lp: driver loaded but no devices found
[   42.794065] Adding 979892k swap on /dev/sdb7.  Priority:-1 extents:1 across:979892k
[   43.209735] e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[   43.209738] e1000: eth0: e1000_watchdog_task: 10/100 speed: disabling TSO
[   43.258375] NET: Registered protocol family 17
[  101.400328] EXT3 FS on sdb1, internal journal
[  101.627131] NET: Registered protocol family 10
[  101.627206] lo: Disabled Privacy Extensions
[  101.942181] AppArmor: Unregistered secondary security module: capability
[  102.211620] No dock devices found.
[  102.343216] input: Power Button (FF) as /class/input/input4
[  102.343318] ACPI: Power Button (FF) [PWRF]
[  102.343873] input: Power Button (CM) as /class/input/input5
[  102.343974] ACPI: Power Button (CM) [PWRB]
[  103.036452] ppdev: user-space parallel port driver
[  103.202745] audit(1189339599.747:3): REJECTING m access to /etc/passwd (cupsd(5876) profile /usr/sbin/cupsd active /usr/sbin/cupsd)
[  103.202855] audit(1189339599.747:4): REJECTING m access to /etc/group (cupsd(5876) profile /usr/sbin/cupsd active /usr/sbin/cupsd)
[  103.203382] audit(1189339599.747:5): REJECTING m access to /etc/group (cupsd(5876) profile /usr/sbin/cupsd active /usr/sbin/cupsd)
[  103.262842] audit(1189339599.747:6): REJECTING w access to /dev/tty (cupsd(5876) profile /usr/sbin/cupsd active /usr/sbin/cupsd)
[  103.327219] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[  103.327224] apm: disabled - APM is not SMP safe.
[  103.450699] AppArmor: Registered secondary security module: capability.
[  103.450704] Capability LSM initialized as secondary
[  103.617759] Bluetooth: Core ver 2.11
[  103.617888] NET: Registered protocol family 31
[  103.617891] Bluetooth: HCI device and connection manager initialized
[  103.617894] Bluetooth: HCI socket layer initialized
[  103.626285] Bluetooth: L2CAP ver 2.8
[  103.626290] Bluetooth: L2CAP socket layer initialized
[  103.852444] Bluetooth: RFCOMM socket layer initialized
[  103.852457] Bluetooth: RFCOMM TTY layer initialized
[  103.852459] Bluetooth: RFCOMM ver 1.8
[  111.898458] eth0: no IPv6 routers present

sudo mount /dev/scd0 =
mount: /dev/scd0 is not a block device

Concernant le kernel, non, je n'ai rien recompilé. Par contre, commme j'ai installé les drivers nvidia manuellement, je pense que tout est recompilé en même temps, non ?

Merci. A+

Dernière modification par Logo1 (Le 09/09/2007, à 15:38)

XavierP56

Re : [resolu] lecteurs/graveurs DVD pas reconnus

Pas forcément, tu peux avoir une option à activer dans le kernel.

Logo1

Re : [resolu] lecteurs/graveurs DVD pas reconnus

OK, je regarde de ce coté la.
Pour le dmesg, tu as vu quelque chose ?

elapouya

Re : [resolu] lecteurs/graveurs DVD pas reconnus

J'abandonne, car en netinstall, ubuntu ne voit pas mon raid 0 soft : il voit deux disques séparés.

Pas de CDROM de vu, pas le Raid soft de vu : ca fait un peu beaucoup...

Du coup, je garde mon vieux PC avec Kubuntu dessus et j'ai installé Xming sur le medion,
donc j'ai du linux et du windows en meme temps sur le meme écran, c'est pas plus mal....

Logo1

Re : [resolu] lecteurs/graveurs DVD pas reconnus

Salut elapouya

Pour le raid, je n'ai pas vu le pb car je l'ai enlevé. Je trouve dommage d'avoir 2 DD et de devoir partionner apres....
Pour les lecteurs, je suis toujours en train de chercher une solution. Je n'ai pas encore eu le courage de compiler le noyau...

elapouya

Re : [resolu] lecteurs/graveurs DVD pas reconnus

J'ai essayé ce soir une Fedora 7.91 (8 beta en fait), et je pense que cette fois-ci les Drives DVD sont reconnus, malheureusement, si j'arrive bien à la mire de login graphique, je n'arrive pas à me logger, cela hang...

Encore un petit effort...

Logo1

Re : [resolu] lecteurs/graveurs DVD pas reconnus

Salut

Ca y est...les lecteurs sont reconnus avec la béta de Gusty.

Merci a tous