#1 Le 25/09/2007, à 18:57
- onizou
Le wifi sur Macbook Core2Duo sous Ubuntu 64?
Bonjour!
J'ai besoin d'aide!
J'ai un Macbook Core2Duo tournant sous Ubuntu 64, et je ne parviens pas à faire fonctionner le Wifi.
Je suis passé à Gusty Gibbon avant sa sortie, puisqu'elle paraissait relativement stable, dans l'espoir que celle ci saurait faire fonctionner la puce Wifi Atheros de mon ordinateur, mais ma Ubuntu 64 ne la reconnait toujours pas.
J'ai testé tout plein de commandes que j'ai pu trouver sur le forum et dans le wiki ayant pour but de faire fonctionner madwifi, sans succès... j'obtiens toujours:
iwconfig
lo no wireless extensions.
eth1 no wireless extensions.
La puce en question est une Atheros AR5418 802.11a/b/g/n, et voici les réponses aux commandes demandées:
cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=7.10
DISTRIB_CODENAME=gutsy
DISTRIB_DESCRIPTION="Ubuntu gutsy (development branch)"
lsusb
Bus 005 Device 004: ID 05ac:8300 Apple Computer, Inc.
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 003: ID 05ac:8205 Apple Computer, Inc.
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 005: ID 05ac:021b Apple Computer, Inc.
Bus 001 Device 004: ID 04fc:0003 Sunplus Technology Co., Ltd CM1092 Optical Scroller Mouse
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 002: ID 05ac:8240 Apple Computer, Inc.
Bus 003 Device 001: ID 0000:0000
lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:07.0 Performance counters: Intel Corporation Unknown device 27a3 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 22)
02:00.0 Network controller: Atheros Communications, Inc. AR5418 802.11a/b/g/n Wireless PCI Express Adapter (rev 01)
03:03.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61)
lshw -C network
*-network
description: Ethernet interface
product: 88E8053 PCI-E Gigabit Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: eth1
version: 22
serial: 00:19:e3:36:60:ad
size: 100MB/s
capacity: 1GB/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.14 duplex=full firmware=N/A ip=192.168.0.11 latency=0 link=yes module=sky2 multicast=yes port=twisted pair speed=100MB/s
*-network UNCLAIMED
description: Network controller
product: AR5418 802.11a/b/g/n Wireless PCI Express Adapter
vendor: Atheros Communications, Inc.
physical id: 0
bus info: pci@0000:02:00.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list
configuration: latency=0
lsmod
Module Size Used by
ath_pci 105392 0
ath_rate_sample 15616 0
wlan 225736 2 ath_pci,ath_rate_sample
ath_hal 219888 2 ath_pci,ath_rate_sample
i915 30848 2
drm 106408 3 i915
binfmt_misc 14860 1
ipv6 317064 16
hci_usb 21020 2
rfcomm 47656 2
l2cap 28672 11 rfcomm
bluetooth 63876 7 hci_usb,rfcomm,l2cap
ppdev 11272 0
acpi_cpufreq 10632 0
cpufreq_ondemand 10896 2
cpufreq_conservative 9608 0
cpufreq_powersave 3072 0
cpufreq_userspace 6048 0
cpufreq_stats 8160 0
freq_table 6464 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
sbs 21520 0
ac 7304 0
dock 12264 0
container 6400 0
battery 12424 0
video 21140 0
button 10400 0
af_packet 28172 2
sbp2 27144 0
parport_pc 41896 0
lp 15048 0
parport 44172 3 ppdev,parport_pc,lp
loop 21764 0
snd_hda_intel 337192 1
snd_pcm_oss 50048 0
snd_mixer_oss 20096 1 snd_pcm_oss
snd_pcm 94344 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 5380 0
snd_seq_oss 36864 0
snd_seq_midi 11008 0
joydev 13440 0
isight_usb 49924 0
appletouch 12416 0
xpad 11400 0
compat_ioctl32 11136 1 isight_usb
sky2 50692 0
videodev 31360 1 isight_usb
v4l1_compat 15364 2 isight_usb,videodev
snd_rawmidi 29824 1 snd_seq_midi
appleir 8192 0
usbhid 32576 0
v4l2_common 21888 3 isight_usb,compat_ioctl32,videodev
hid 33408 1 usbhid
snd_seq_midi_event 9984 2 snd_seq_oss,snd_seq_midi
snd_seq 62496 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 27272 2 snd_pcm,snd_seq
snd_seq_device 10260 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
iTCO_wdt 13648 0
iTCO_vendor_support 5636 1 iTCO_wdt
snd 69288 11 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 10272 1 snd
snd_page_alloc 11920 2 snd_hda_intel,snd_pcm
shpchp 38300 0
pci_hotplug 36612 1 shpchp
intel_agp 30624 1
evdev 13056 8
ext3 146448 1
jbd 69360 1 ext3
mbcache 11272 1 ext3
sg 41384 0
sd_mod 32512 3
sr_mod 19876 0
cdrom 41768 1 sr_mod
ata_piix 20996 2
ata_generic 9988 0
libata 138416 2 ata_piix,ata_generic
ohci1394 38984 0
ieee1394 109528 2 sbp2,ohci1394
ehci_hcd 39820 0
scsi_mod 172856 5 sbp2,sg,sd_mod,sr_mod,libata
uhci_hcd 29600 0
usbcore 160944 9 hci_usb,isight_usb,appletouch,xpad,appleir,usbhid,ehci_hcd,uhci_hcd
thermal 16528 0
processor 36104 2 acpi_cpufreq,thermal
fan 6920 0
fuse 52528 1
apparmor 47008 0
commoncap 9472 1 apparmor
iwconfig
lo no wireless extensions.
eth1 no wireless extensions.
ifconfig
eth1 Lien encap:Ethernet HWaddr 00:19:E3:36:60:AD
inet adr:192.168.0.11 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::219:e3ff:fe36:60ad/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:22203 erreurs:0 :0 overruns:0 frame:0
TX packets:19184 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:27219719 (25.9 MB) Octets transmis:2472559 (2.3 MB)
Interruption:16
lo Lien encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:46 erreurs:0 :0 overruns:0 frame:0
TX packets:46 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:2300 (2.2 KB) Octets transmis:2300 (2.2 KB)
iwlist scan
lo Interface doesn't support scanning.
eth1 Interface doesn't support scanning.
cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet dhcp
Merci!
Dernière modification par onizou (Le 25/10/2007, à 11:28)
Hors ligne
#2 Le 27/09/2007, à 18:14
- onizou
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
Dois-je déduire du fait que personne ne répond que mon problème n'a pour le moment pas de solution?
Si c'est le cas, s'il vous plait, dites le moi... car j'ai besoin du wifi, et vos avis me permettront de savoir si je dois tenter avec une Debian 64bits ou pas!
Merci
Hors ligne
#3 Le 27/09/2007, à 20:02
- willy78
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
En je crois que si personne ne reponds c'est a cause du "64" dans le titre.
Ta carte fonctionne par ndiswrapper et faut des driver 64 bits
Et ta carte est bien reconnu :
02:00.0 Network controller: Atheros Communications, Inc. AR5418 802.11a/b/g/n Wireless PCI Express Adapter (rev 01)
Apparement ce driver en 64 bits il y arrive pas, il essaye mais ça veut pas!
ath_pci 105392 0
Quelques tutos pour le wifi sous Ubuntu:
http://wlety.free.fr/forum
Hors ligne
#4 Le 27/09/2007, à 20:05
- Mornagest
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
Salut
Tu as compilé toi-même MadWifi depuis les sources ? Tu devrais sans doute trouver les sources pour 64 bits, non ?
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne
#5 Le 27/09/2007, à 22:07
- onizou
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
Merci d'avoir pris le temps de m'aider!
Alors j'ai d'abord téléchargé Madwifi sur les dépôts officiels, mais le wifi ne fonctionnait toujours pas. J'ai alors cherché des solutions sur le wiki et le forum où j'ai trouvé plusieurs listes de commandes qui téléchargent et compilent Madwifi il me semble, mais j'en ai essayé tout plein sans résultats.
Mornagest, où puis-je trouver ces sources 64 bits?
Willy78, je vais tenter avec Ndiswrapper!
Dernière modification par onizou (Le 27/09/2007, à 23:39)
Hors ligne
#6 Le 27/09/2007, à 23:49
- Mornagest
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
http://archive.ubuntu.com/ubuntu/pool/universe/m/madwifi-tools/
Tu choisis pour ppc (PowerPC donc) (si c'est bien ton installation, sinon prends 64 bits bien sûr)
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne
#7 Le 29/09/2007, à 00:26
- onizou
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
L'installeur de paquet m'indique que c'est déjà la version installée sur ma Ubuntu (la 0.9.3)
Et lorsque je veux installer le pilote windows par Ndiswrapper, il m'indique "N'est pas un fichier ".inf" de pilote valide"...
Peut être devrais-je attendre la publication de la version stable de Gusty?
Hors ligne
#8 Le 29/09/2007, à 11:23
- Mornagest
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
Que contient le dossier avec tes pilotes ? Fais ls pour lister les fichiers
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne
#9 Le 29/09/2007, à 11:49
- onizou
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
Ce n'est pas un dossier mais un fichier .exe que j'ai téléchargé
Hors ligne
#10 Le 29/09/2007, à 11:53
- Mornagest
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
Il faut en extraire les pilotes, alors. Utilise cabextract (disponible sur le CD d'installation, si tu ne l'as pas installé).
Puis :
cabextract nomdu.exe
Tu auras tes pilotes extraits dans ton /home/username. Liste alors les fichiers avec ls
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne
#11 Le 24/10/2007, à 21:04
- onizou
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
Un grand merci à vous tous pour votre aide!
J'avais décidé d'attendre la version finale d'Ubuntu 7.10 avant de revenir sur le forum si le Wifi ne fonctionnait toujours pas, au cas où le dysfonctionnement était simplement dû à l'immaturité de la 7.10 encore en développement. Et je fus très déçu de constater qu'il n'était toujours pas supporté par la version finale de Ubuntu 7.10...
Je suis alors tombé sur cet article du "planet" d'Ubuntu-fr provenant de ce blog : http://bastnic.info/index.php/post/2007 … genetation
Et grace à Bast et son super tutoriel tout beau tout simple, ma Ubuntu 64 sait enfin utiliser ma puce wifi Atheros!
Encore merci pour votre aide!
Dernière modification par onizou (Le 24/10/2007, à 21:07)
Hors ligne
#12 Le 24/10/2007, à 22:59
- onizou
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
Noooooooooooooooooooooooooooooooooooooooooooon
Ça ne marche plus!!!! Alors que je n'ai rien désinstallé...
Voici les réponses aux commandes demandées:
nizou@Pikmin-Noir:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=7.10
DISTRIB_CODENAME=gutsy
DISTRIB_DESCRIPTION="Ubuntu 7.10"
nizou@Pikmin-Noir:~$ lsusb
Bus 005 Device 004: ID 05ac:8300 Apple Computer, Inc.
Bus 005 Device 001: ID 0000:0000
Bus 002 Device 004: ID 04fc:0003 Sunplus Technology Co., Ltd CM1092 Optical Scroller Mouse
Bus 002 Device 001: ID 0000:0000
Bus 004 Device 003: ID 05ac:8205 Apple Computer, Inc.
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 004: ID 05ac:8240 Apple Computer, Inc.
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 003: ID 05ac:021b Apple Computer, Inc.
Bus 001 Device 001: ID 0000:0000
nizou@Pikmin-Noir:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:07.0 Performance counters: Intel Corporation Unknown device 27a3 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 22)
02:00.0 Network controller: Atheros Communications, Inc. AR5418 802.11a/b/g/n Wireless PCI Express Adapter (rev 01)
03:03.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61)
nizou@Pikmin-Noir:~$ sudo lshw -C network
*-network
description: Ethernet interface
product: 88E8053 PCI-E Gigabit Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: eth0
version: 22
serial: 00:19:e3:36:60:ad
size: 100MB/s
capacity: 1GB/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.18 duplex=full firmware=N/A ip=192.168.0.12 latency=0 link=yes module=sky2 multicast=yes port=twisted pair speed=100MB/s
*-network UNCLAIMED
description: Network controller
product: AR5418 802.11a/b/g/n Wireless PCI Express Adapter
vendor: Atheros Communications, Inc.
physical id: 0
bus info: pci@0000:02:00.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list
configuration: latency=0
nizou@Pikmin-Noir:~$ lsmod
Module Size Used by
wlan_scan_sta 16640 0
ipv6 317192 10
i915 30976 2
drm 106408 3 i915
af_packet 28172 2
binfmt_misc 14860 1
hci_usb 21020 2
rfcomm 47656 2
l2cap 28672 11 rfcomm
bluetooth 63876 7 hci_usb,rfcomm,l2cap
ppdev 11272 0
acpi_cpufreq 10632 0
cpufreq_ondemand 10896 2
cpufreq_userspace 6048 0
cpufreq_conservative 9608 0
cpufreq_powersave 3072 0
cpufreq_stats 8160 0
freq_table 6464 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
container 6400 0
ac 7304 0
sbs 21520 0
battery 12424 0
button 10400 0
video 21140 0
dock 12264 0
sbp2 27144 0
parport_pc 41896 0
lp 15048 0
parport 44172 3 ppdev,parport_pc,lp
loop 21764 0
snd_hda_intel 375848 1
snd_pcm_oss 47488 0
snd_mixer_oss 20096 1 snd_pcm_oss
snd_pcm 93832 2 snd_hda_intel,snd_pcm_oss
snd_page_alloc 12560 2 snd_hda_intel,snd_pcm
snd_hwdep 12168 1 snd_hda_intel
snd_seq_dummy 5380 0
snd_seq_oss 36864 0
snd_seq_midi 11008 0
snd_rawmidi 29824 1 snd_seq_midi
joydev 13440 0
isight_usb 49924 0
appleir 8192 0
snd_seq_midi_event 9984 2 snd_seq_oss,snd_seq_midi
compat_ioctl32 11136 1 isight_usb
appletouch 12416 0
xpad 11400 0
videodev 31360 1 isight_usb
wlan 230400 1 wlan_scan_sta
snd_seq 62624 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
sky2 52228 0
v4l1_compat 15364 2 isight_usb,videodev
v4l2_common 21888 3 isight_usb,compat_ioctl32,videodev
ath_hal 219888 0
snd_timer 27400 2 snd_pcm,snd_seq
snd_seq_device 10260 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 69544 12 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 10272 1 snd
iTCO_wdt 13648 0
iTCO_vendor_support 5636 1 iTCO_wdt
shpchp 38300 0
pci_hotplug 36612 1 shpchp
intel_agp 30624 1
evdev 13056 8
ext3 146576 1
jbd 69360 1 ext3
mbcache 11272 1 ext3
sg 41384 0
sd_mod 32512 3
sr_mod 19876 0
cdrom 41768 1 sr_mod
ata_generic 9988 0
usbhid 32576 0
hid 33408 1 usbhid
ehci_hcd 40076 0
ohci1394 38984 0
ieee1394 109528 2 sbp2,ohci1394
ata_piix 20996 2
libata 138928 2 ata_generic,ata_piix
scsi_mod 172856 5 sbp2,sg,sd_mod,sr_mod,libata
uhci_hcd 29600 0
usbcore 161584 9 hci_usb,isight_usb,appleir,appletouch,xpad,usbhid,ehci_hcd,uhci_hcd
thermal 16528 0
processor 36232 2 acpi_cpufreq,thermal
fan 6920 0
fuse 52528 1
apparmor 47008 0
commoncap 9472 1 apparmor
nizou@Pikmin-Noir:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
nizou@Pikmin-Noir:~$ ifconfig
eth0 Lien encap:Ethernet HWaddr 00:19:E3:36:60:AD
inet adr:192.168.0.12 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::219:e3ff:fe36:60ad/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:1218 erreurs:0 :0 overruns:0 frame:0
TX packets:1230 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:947982 (925.7 KB) Octets transmis:189104 (184.6 KB)
Interruption:16
lo Lien encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:2 erreurs:0 :0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:100 (100.0 b) Octets transmis:100 (100.0 b)
nizou@Pikmin-Noir:~$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
nizou@Pikmin-Noir:~$ cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
#iface eth0 inet dhcp
Sauriez-vous où est le problème? ...
Dernière modification par onizou (Le 25/10/2007, à 00:34)
Hors ligne
#13 Le 24/10/2007, à 23:55
- Mornagest
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
Salut
Alors, pour les sources compilées, il faut toujours recompiler les trucs à chaque changement de noyau. Ce qui veut dire qu'il te suffit de refaire la manip donnée sur le blog de Bast et ça devrait fonctionner à nouveau
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne
#14 Le 25/10/2007, à 00:19
- onizou
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
Merci d'être encore là pour m'aider Mornagest! ^^
J'ai fait cette manipulation seulement un peu plus tôt dans la soirée! Et ça a fonctionné jusqu'à ce que je redémarre l'ordinateur il me semble...
Et lorsque je retente la manip de Bast, ça bloque à une étape:
nizou@Pikmin-Noir:~/madwifi-ng-r2717-20071002$ sudo modprobe ath_pci
FATAL: Error inserting ath_pci (/lib/modules/2.6.22-14-generic/net/ath_pci.ko): Unknown symbol in module, or unknown parameter (see dmesg)
Hors ligne
#15 Le 25/10/2007, à 00:23
- Mornagest
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
Tu as installé les linux-headers correspondant à ton noyau, avant de compiler ?
sudo aptitude install linux-headers-`uname -r`
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne
#16 Le 25/10/2007, à 00:26
- onizou
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
Oui ils sont bien installés
(je vais les réinstaller!)
Dernière modification par onizou (Le 25/10/2007, à 00:28)
Hors ligne
#17 Le 25/10/2007, à 00:28
- Mornagest
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
Que donne dmesg ?
Edit : entre balises code s'il te plaît
Dernière modification par Mornagest (Le 25/10/2007, à 00:29)
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne
#18 Le 25/10/2007, à 00:33
- onizou
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
Oh désolé pour la balise, je vais corriger mes anciens postes!
La réponse à dmesg est tellement longue qu'apparemment le début n'apparaît même plus dans la fenêtre du terminal lorsque je veux le copier...
[ 0.000000] DMA32 zone: 7003 pages used for memmap
[ 0.000000] DMA32 zone: 505245 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 508065
[ 0.000000] Kernel command line: root=UUID=ebdb6359-dd26-45cc-a757-a4d86a2a791d ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 27.620980] time.c: Detected 1995.000 MHz processor.
[ 27.622521] Console: colour VGA+ 80x25
[ 27.622543] Checking aperture...
[ 27.622557] Calgary: detecting Calgary via BIOS EBDA area
[ 27.622565] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 27.650449] Memory: 2024852k/2065376k available (2274k kernel code, 40136k reserved, 1181k data, 296k init)
[ 27.650502] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 27.726799] Calibrating delay using timer specific routine.. 3994.53 BogoMIPS (lpj=7989068)
[ 27.726835] Security Framework v1.0.0 initialized
[ 27.726844] SELinux: Disabled at boot.
[ 27.727357] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 27.728883] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 27.729591] Mount-cache hash table entries: 256
[ 27.729747] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 27.729751] CPU: L2 cache: 4096K
[ 27.729754] CPU 0/0 -> Node 0
[ 27.729756] using mwait in idle threads.
[ 27.729758] CPU: Physical Processor ID: 0
[ 27.729760] CPU: Processor Core ID: 0
[ 27.729769] CPU0: Thermal monitoring enabled (TM2)
[ 27.729781] SMP alternatives: switching to UP code
[ 27.730088] Early unpacking initramfs... done
[ 28.140880] ACPI: Core revision 20070126
[ 28.140924] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 28.183918] Using local APIC timer interrupts.
[ 28.234018] result 10390612
[ 28.234020] Detected 10.390 MHz APIC timer.
[ 28.234578] SMP alternatives: switching to SMP code
[ 28.234673] Booting processor 1/2 APIC 0x1
[ 28.245262] Initializing CPU#1
[ 28.322465] Calibrating delay using timer specific routine.. 3990.04 BogoMIPS (lpj=7980088)
[ 28.322472] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 28.322475] CPU: L2 cache: 4096K
[ 28.322477] CPU 1/1 -> Node 0
[ 28.322479] CPU: Physical Processor ID: 0
[ 28.322481] CPU: Processor Core ID: 1
[ 28.322488] CPU1: Thermal monitoring enabled (TM2)
[ 28.323079] Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 28.323119] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 28.346467] Brought up 2 CPUs
[ 28.945536] migration_cost=50
[ 28.945734] NET: Registered protocol family 16
[ 28.945826] ACPI: bus type pci registered
[ 28.945833] PCI: Using configuration type 1
[ 28.946888] ACPI: EC: Found ECDT
[ 28.948584] ACPI: System BIOS is requesting _OSI(Linux)
[ 28.948587] ACPI: Please test with "acpi_osi=!Linux"
[ 28.948588] Please send dmidecode to linux-acpi@vger.kernel.org
[ 28.948981] ACPI: Interpreter enabled
[ 28.948984] ACPI: (supports S0 S3 S4 S5)
[ 28.949003] ACPI: Using IOAPIC for interrupt routing
[ 28.958385] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 28.958516] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 28.958525] PCI: Probing PCI hardware (bus 00)
[ 28.959286] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 28.959290] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[ 28.960051] PCI: Transparent bridge - 0000:00:1e.0
[ 28.960117] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 28.960444] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 28.960568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 28.960705] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 28.967698] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 28.967792] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 28.967883] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 28.967976] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 28.968066] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 28.968157] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 28.968248] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 28.968338] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 28.968449] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 28.968459] pnp: PnP ACPI init
[ 28.968470] ACPI: bus type pnp registered
[ 28.971826] pnp: PnP ACPI: found 9 devices
[ 28.971829] ACPI: ACPI bus type pnp unregistered
[ 28.971895] PCI: Using ACPI for IRQ routing
[ 28.971897] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 28.972016] NET: Registered protocol family 8
[ 28.972019] NET: Registered protocol family 20
[ 28.972033] PCI-GART: No AMD northbridge found.
[ 28.972039] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 28.972043] hpet0: 3 64-bit timers, 14318180 Hz
[ 28.973185] pnp: 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 28.973189] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 28.973192] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 28.973196] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 28.973204] pnp: 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
[ 28.973605] PCI: Bridge: 0000:00:1c.0
[ 28.973609] IO window: 1000-1fff
[ 28.973615] MEM window: 90200000-902fffff
[ 28.973620] PREFETCH window: 90500000-905fffff
[ 28.973627] PCI: Bridge: 0000:00:1c.1
[ 28.973628] IO window: disabled.
[ 28.973634] MEM window: 90100000-901fffff
[ 28.973639] PREFETCH window: disabled.
[ 28.973645] PCI: Bridge: 0000:00:1e.0
[ 28.973646] IO window: disabled.
[ 28.973653] MEM window: 90000000-900fffff
[ 28.973657] PREFETCH window: disabled.
[ 28.973687] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 28.973695] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 28.973720] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 16 (level, low) -> IRQ 16
[ 28.973726] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 28.973740] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 28.973751] NET: Registered protocol family 2
[ 28.974109] Time: tsc clocksource has been installed.
[ 29.014162] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 29.014986] TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
[ 29.018638] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 29.019476] TCP: Hash tables configured (established 262144 bind 65536)
[ 29.019479] TCP reno registered
[ 29.030230] checking if image is initramfs... it is
[ 29.816516] Freeing initrd memory: 7200k freed
[ 29.821648] audit: initializing netlink socket (disabled)
[ 29.821675] audit(1193259060.148:1): initialized
[ 29.823976] VFS: Disk quotas dquot_6.5.1
[ 29.824032] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 29.824129] io scheduler noop registered
[ 29.824131] io scheduler anticipatory registered
[ 29.824133] io scheduler deadline registered
[ 29.824236] io scheduler cfq registered (default)
[ 29.824250] Boot video device is 0000:00:02.0
[ 29.827008] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 29.827067] assign_interrupt_mode Found MSI capability
[ 29.827071] Allocate Port Service[0000:00:1c.0:pcie00]
[ 29.827111] Allocate Port Service[0000:00:1c.0:pcie02]
[ 29.827215] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 29.827273] assign_interrupt_mode Found MSI capability
[ 29.827276] Allocate Port Service[0000:00:1c.1:pcie00]
[ 29.827307] Allocate Port Service[0000:00:1c.1:pcie02]
[ 29.849570] Real Time Clock Driver v1.12ac
[ 29.849848] hpet_resources: 0xfed00000 is busy
[ 29.849875] Linux agpgart interface v0.102 (c) Dave Jones
[ 29.849877] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 29.850923] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 29.851167] input: Macintosh mouse button emulation as /class/input/input0
[ 29.851286] PNP: No PS/2 controller found. Probing ports directly.
[ 29.852137] i8042.c: No controller found.
[ 29.852273] mice: PS/2 mouse device common for all mice
[ 29.852508] TCP cubic registered
[ 29.852565] NET: Registered protocol family 1
[ 29.852748] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 29.852756] Freeing unused kernel memory: 296k freed
[ 31.027105] AppArmor: AppArmor initialized<5>audit(1193259061.352:2): type=1505 info="AppArmor initialized" pid=1239
[ 31.032137] fuse init (API version 7.8)
[ 31.036078] Failure registering capabilities with primary security module.
[ 31.064582] ACPI: SSDT 7EEB8C10, 026C (r1 APPLE Cpu0Ist 3000 INTL 20050309)
[ 31.064786] ACPI: SSDT 7EEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
[ 31.065048] Monitor-Mwait will be used to enter C-1 state
[ 31.065052] Monitor-Mwait will be used to enter C-2 state
[ 31.065055] Monitor-Mwait will be used to enter C-3 state
[ 31.065059] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 31.065065] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 31.065321] ACPI: SSDT 7EEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
[ 31.065513] ACPI: SSDT 7EEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
[ 31.065807] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 31.065812] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 31.072986] Marking TSC unstable due to possible TSC halt in C2
[ 31.076960] Time: hpet clocksource has been installed.
[ 31.468987] usbcore: registered new interface driver usbfs
[ 31.469013] usbcore: registered new interface driver hub
[ 31.469038] usbcore: registered new device driver usb
[ 31.469675] USB Universal Host Controller Interface driver v3.0
[ 31.469788] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 31.469801] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 31.469806] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 31.469971] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 31.470005] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00002080
[ 31.470123] usb usb1: configuration #1 chosen from 1 choice
[ 31.470147] hub 1-0:1.0: USB hub found
[ 31.470156] hub 1-0:1.0: 2 ports detected
[ 31.522261] SCSI subsystem initialized
[ 31.531238] libata version 2.21 loaded.
[ 31.550811] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
[ 31.550837] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 31.550841] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 31.550864] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 31.550898] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
[ 31.550998] usb usb2: configuration #1 chosen from 1 choice
[ 31.551024] hub 2-0:1.0: USB hub found
[ 31.551029] hub 2-0:1.0: 2 ports detected
[ 31.574809] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 31.574822] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 31.574828] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 31.574858] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 31.574898] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[ 31.575003] usb usb3: configuration #1 chosen from 1 choice
[ 31.575028] hub 3-0:1.0: USB hub found
[ 31.575034] hub 3-0:1.0: 2 ports detected
[ 31.599831] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 31.599844] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 31.599850] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 31.599884] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 31.599922] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
[ 31.600025] usb usb4: configuration #1 chosen from 1 choice
[ 31.600049] hub 4-0:1.0: USB hub found
[ 31.600054] hub 4-0:1.0: 2 ports detected
[ 31.603474] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 31.619026] ata_piix 0000:00:1f.1: version 2.11
[ 31.619039] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 31.619071] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 31.619203] scsi0 : ata_piix
[ 31.619263] scsi1 : ata_piix
[ 31.619337] ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000120b0 irq 14
[ 31.619340] ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000120b8 irq 15
[ 31.665871] usb 1-2: configuration #1 chosen from 1 choice
[ 31.727343] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KBV9, max UDMA/66
[ 31.731409] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 31.753072] ata1.00: configured for UDMA/66
[ 31.770545] usb 2-1: configuration #1 chosen from 1 choice
[ 31.809232] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D KBV9 PQ: 0 ANSI: 5
[ 31.809326] ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]
[ 31.809333] ata_piix 0000:00:1f.2: invalid MAP value 0
[ 31.844707] usb 2-2: new full speed USB device using uhci_hcd and address 3
[ 31.856674] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 19
[ 31.856721] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 31.856769] scsi2 : ata_piix
[ 31.856843] scsi3 : ata_piix
[ 31.856936] ata3: SATA max UDMA/133 cmd 0x00000000000120c8 ctl 0x00000000000120ee bmdma 0x00000000000120a0 irq 19
[ 31.856940] ata4: SATA max UDMA/133 cmd 0x00000000000120c0 ctl 0x00000000000120ea bmdma 0x00000000000120a8 irq 19
[ 31.875057] usb 2-2: configuration #1 chosen from 1 choice
[ 31.911718] ata3.01: ATA-7: Hitachi HTS541616J9SA00, SB4AC7CP, max UDMA/133
[ 31.911725] ata3.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 31.913621] ata3.01: configured for UDMA/133
[ 31.949257] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 31.961190] scsi 2:0:1:0: Direct-Access ATA Hitachi HTS54161 SB4A PQ: 0 ANSI: 5
[ 31.962608] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21
[ 31.963776] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 31.963783] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 31.963835] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 31.963879] ehci_hcd 0000:00:1d.7: debug port 1
[ 31.963886] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 31.963896] ehci_hcd 0000:00:1d.7: irq 21, io mem 0x90445400
[ 31.985244] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 31.985401] usb usb5: configuration #1 chosen from 1 choice
[ 31.985450] hub 5-0:1.0: USB hub found
[ 31.985457] hub 5-0:1.0: 8 ports detected
[ 32.015505] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 32.069317] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[90000000-900007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 32.086134] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 32.086140] Uniform CD-ROM driver Revision: 3.20
[ 32.086211] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 32.086590] sd 2:0:1:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 32.086601] sd 2:0:1:0: [sda] Write Protect is off
[ 32.086604] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 32.086618] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 32.086662] sd 2:0:1:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 32.086671] sd 2:0:1:0: [sda] Write Protect is off
[ 32.086673] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 32.086687] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 32.086692] sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 32.089298] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 32.108383] sda1 sda2 < sda5 >
[ 32.135427] sd 2:0:1:0: [sda] Attached SCSI disk
[ 32.299818] Attempting manual resume
[ 32.299822] swsusp: Resume From Partition 8:5
[ 32.299824] PM: Checking swsusp image.
[ 32.300052] PM: Resume from disk failed.
[ 32.317514] usb 3-2: device not accepting address 2, error -71
[ 32.343793] kjournald starting. Commit interval 5 seconds
[ 32.343823] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.500970] usb 2-1: USB disconnect, address 2
[ 32.628330] usb 2-2: USB disconnect, address 3
[ 33.339407] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe7bd6e4]
[ 33.410732] usb 5-4: new high speed USB device using ehci_hcd and address 4
[ 33.542943] usb 5-4: configuration #1 chosen from 1 choice
[ 34.020476] usbcore: registered new interface driver hiddev
[ 34.259401] usb 3-2: new full speed USB device using uhci_hcd and address 4
[ 34.441035] usb 3-2: configuration #1 chosen from 1 choice
[ 34.443057] usb 1-2: USB disconnect, address 2
[ 34.443394] usbcore: registered new interface driver usbhid
[ 34.443397] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 34.681603] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 34.871013] usb 1-2: configuration #1 chosen from 1 choice
[ 34.877308] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input1
[ 34.877317] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 34.886009] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input2
[ 34.886019] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 35.125750] usb 2-1: new low speed USB device using uhci_hcd and address 4
[ 35.294323] usb 2-1: configuration #1 chosen from 1 choice
[ 35.312489] input: USB OpticalWheel Mouse as /class/input/input3
[ 35.312508] input: USB HID v1.10 Mouse [USB OpticalWheel Mouse] on usb-0000:00:1d.1-1
[ 35.547518] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 35.728411] usb 4-1: configuration #1 chosen from 1 choice
[ 35.748620] input: HID 05ac:1000 as /class/input/input4
[ 35.748627] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 35.766651] input: HID 05ac:1000 as /class/input/input5
[ 35.766678] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 39.902983] agpgart: Detected an Intel 945GM Chipset.
[ 39.905096] agpgart: Detected 16124K stolen memory.
[ 39.920424] agpgart: AGP aperture is 256M @ 0x80000000
[ 39.987834] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 39.992953] intel_rng: FWH not detected
[ 40.028439] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 40.039306] iTCO_vendor_support: vendor-support=0
[ 40.041500] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 40.042803] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
[ 40.044069] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 40.322531] ath_hal: module license 'Proprietary' taints kernel.
[ 40.331025] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 40.396617] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 40.396633] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 40.397749] sky2 0000:01:00.0: v1.18 addr 0x90200000 irq 16 Yukon-EC (0xb6) rev 2
[ 40.397900] sky2 eth0: addr 00:19:e3:36:60:ad
[ 40.480311] wlan: 0.8.4.2 (svn r2717)
[ 40.504670] ath_pci: disagrees about version of symbol _ath_hal_attach
[ 40.504674] ath_pci: Unknown symbol _ath_hal_attach
[ 40.504764] ath_pci: disagrees about version of symbol ath_hal_process_noisefloor
[ 40.504767] ath_pci: Unknown symbol ath_hal_process_noisefloor
[ 40.504957] ath_pci: disagrees about version of symbol ath_hal_computetxtime
[ 40.504959] ath_pci: Unknown symbol ath_hal_computetxtime
[ 40.505140] ath_pci: disagrees about version of symbol ath_hal_mhz2ieee
[ 40.505143] ath_pci: Unknown symbol ath_hal_mhz2ieee
[ 40.505294] ath_pci: Unknown symbol _ath_hal_detach
[ 40.506017] ath_pci: disagrees about version of symbol ath_hal_init_channels
[ 40.506019] ath_pci: Unknown symbol ath_hal_init_channels
[ 40.506171] ath_pci: disagrees about version of symbol ath_hal_getwirelessmodes
[ 40.506173] ath_pci: Unknown symbol ath_hal_getwirelessmodes
[ 40.521249] Linux video capture interface: v2.00
[ 40.529316] usbcore: registered new interface driver xpad
[ 40.529320] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[ 40.539820] appletouch Geyser 3 inited.
[ 40.539906] input: appletouch as /class/input/input6
[ 40.539982] usbcore: registered new interface driver appletouch
[ 40.610890] input: Apple Mac mini infrared remote control driver as /class/input/input7
[ 40.610948] usbcore: registered new interface driver appleir
[ 40.610951] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/mactel/appleir.c: v1.1:USB Apple MacMini IR Receiver driver
[ 40.655758] uvcvideo: iSight: firmware file AppleUSBVideoSupport not found.
[ 40.655795] usbcore: registered new interface driver isight
[ 40.655800] USB Video Class driver (v0.1.0)
[ 40.853154] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 40.854239] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 40.877397] hda_codec: STAC922x, Apple subsys_id=106b2200
[ 41.799645] loop: module loaded
[ 41.863354] lp: driver loaded but no devices found
[ 42.000224] Adding 5952040k swap on /dev/sda5. Priority:-1 extents:1 across:5952040k
[ 42.425332] EXT3 FS on sda1, internal journal
[ 44.342613] No dock devices found.
[ 44.350582] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 44.396114] input: Power Button (FF) as /class/input/input8
[ 44.396139] ACPI: Power Button (FF) [PWRF]
[ 44.396186] input: Lid Switch as /class/input/input9
[ 44.396203] ACPI: Lid Switch [LID0]
[ 44.396246] input: Power Button (CM) as /class/input/input10
[ 44.396261] ACPI: Power Button (CM) [PWRB]
[ 44.396300] input: Sleep Button (CM) as /class/input/input11
[ 44.396314] ACPI: Sleep Button (CM) [SLPB]
[ 44.510888] ACPI: Battery Slot [BAT0] (battery present)
[ 44.534556] ACPI: AC Adapter [ADP1] (on-line)
[ 45.641339] ppdev: user-space parallel port driver
[ 45.826870] audit(1193259078.237:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5127 profile="/usr/sbin/cupsd"
[ 45.941579] sky2 eth0: enabling interface
[ 46.194627] Failure registering capabilities with primary security module.
[ 46.388205] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
[ 46.416685] Bluetooth: Core ver 2.11
[ 46.416765] NET: Registered protocol family 31
[ 46.416768] Bluetooth: HCI device and connection manager initialized
[ 46.416774] Bluetooth: HCI socket layer initialized
[ 46.430558] Bluetooth: L2CAP ver 2.8
[ 46.430564] Bluetooth: L2CAP socket layer initialized
[ 46.434676] Bluetooth: RFCOMM socket layer initialized
[ 46.434810] Bluetooth: RFCOMM TTY layer initialized
[ 46.434814] Bluetooth: RFCOMM ver 1.8
[ 46.663592] usb 4-1: USB disconnect, address 2
[ 46.807931] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 46.925110] usb 4-1: configuration #1 chosen from 1 choice
[ 47.012719] Bluetooth: HCI USB driver ver 2.9
[ 47.016905] usbcore: registered new interface driver hci_usb
[ 47.620466] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
[ 50.683443] NET: Registered protocol family 17
[ 51.345960] [drm] Initialized drm 1.1.0 20060810
[ 51.351345] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 51.354230] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 52.915324] appletouch: incomplete data package (first byte: 2, length: 4).
[ 53.564405] NET: Registered protocol family 10
[ 53.564654] lo: Disabled Privacy Extensions
[ 62.217767] eth0: no IPv6 routers present
[ 251.626693] ath_pci: disagrees about version of symbol _ath_hal_attach
[ 251.626703] ath_pci: Unknown symbol _ath_hal_attach
[ 251.626873] ath_pci: disagrees about version of symbol ath_hal_process_noisefloor
[ 251.626878] ath_pci: Unknown symbol ath_hal_process_noisefloor
[ 251.627237] ath_pci: disagrees about version of symbol ath_hal_computetxtime
[ 251.627241] ath_pci: Unknown symbol ath_hal_computetxtime
[ 251.627580] ath_pci: disagrees about version of symbol ath_hal_mhz2ieee
[ 251.627585] ath_pci: Unknown symbol ath_hal_mhz2ieee
[ 251.627864] ath_pci: Unknown symbol _ath_hal_detach
[ 251.629355] ath_pci: disagrees about version of symbol ath_hal_init_channels
[ 251.629361] ath_pci: Unknown symbol ath_hal_init_channels
[ 251.629652] ath_pci: disagrees about version of symbol ath_hal_getwirelessmodes
[ 251.629659] ath_pci: Unknown symbol ath_hal_getwirelessmodes
[ 259.289539] ath_pci: disagrees about version of symbol _ath_hal_attach
[ 259.289549] ath_pci: Unknown symbol _ath_hal_attach
[ 259.289734] ath_pci: disagrees about version of symbol ath_hal_process_noisefloor
[ 259.289738] ath_pci: Unknown symbol ath_hal_process_noisefloor
[ 259.290095] ath_pci: disagrees about version of symbol ath_hal_computetxtime
[ 259.290099] ath_pci: Unknown symbol ath_hal_computetxtime
[ 259.290436] ath_pci: disagrees about version of symbol ath_hal_mhz2ieee
[ 259.290440] ath_pci: Unknown symbol ath_hal_mhz2ieee
[ 259.290714] ath_pci: Unknown symbol _ath_hal_detach
[ 259.293145] ath_pci: disagrees about version of symbol ath_hal_init_channels
[ 259.293150] ath_pci: Unknown symbol ath_hal_init_channels
[ 259.293437] ath_pci: disagrees about version of symbol ath_hal_getwirelessmodes
[ 259.293441] ath_pci: Unknown symbol ath_hal_getwirelessmodes
[ 290.880303] ath_pci: disagrees about version of symbol _ath_hal_attach
[ 290.880318] ath_pci: Unknown symbol _ath_hal_attach
[ 290.880490] ath_pci: disagrees about version of symbol ath_hal_process_noisefloor
[ 290.880495] ath_pci: Unknown symbol ath_hal_process_noisefloor
[ 290.880863] ath_pci: disagrees about version of symbol ath_hal_computetxtime
[ 290.880867] ath_pci: Unknown symbol ath_hal_computetxtime
[ 290.881207] ath_pci: disagrees about version of symbol ath_hal_mhz2ieee
[ 290.881213] ath_pci: Unknown symbol ath_hal_mhz2ieee
[ 290.881501] ath_pci: Unknown symbol _ath_hal_detach
[ 290.882902] ath_pci: disagrees about version of symbol ath_hal_init_channels
[ 290.882907] ath_pci: Unknown symbol ath_hal_init_channels
[ 290.883195] ath_pci: disagrees about version of symbol ath_hal_getwirelessmodes
[ 290.883199] ath_pci: Unknown symbol ath_hal_getwirelessmodes
[ 1027.148809] ath_pci: disagrees about version of symbol _ath_hal_attach
[ 1027.148820] ath_pci: Unknown symbol _ath_hal_attach
[ 1027.148991] ath_pci: disagrees about version of symbol ath_hal_process_noisefloor
[ 1027.148996] ath_pci: Unknown symbol ath_hal_process_noisefloor
[ 1027.149384] ath_pci: disagrees about version of symbol ath_hal_computetxtime
[ 1027.149389] ath_pci: Unknown symbol ath_hal_computetxtime
[ 1027.149727] ath_pci: disagrees about version of symbol ath_hal_mhz2ieee
[ 1027.149732] ath_pci: Unknown symbol ath_hal_mhz2ieee
[ 1027.150010] ath_pci: Unknown symbol _ath_hal_detach
[ 1027.151427] ath_pci: disagrees about version of symbol ath_hal_init_channels
[ 1027.151434] ath_pci: Unknown symbol ath_hal_init_channels
[ 1027.151722] ath_pci: disagrees about version of symbol ath_hal_getwirelessmodes
[ 1027.151728] ath_pci: Unknown symbol ath_hal_getwirelessmodes
[ 2823.991031] ath_pci: disagrees about version of symbol _ath_hal_attach
[ 2823.991041] ath_pci: Unknown symbol _ath_hal_attach
[ 2823.991212] ath_pci: disagrees about version of symbol ath_hal_process_noisefloor
[ 2823.991216] ath_pci: Unknown symbol ath_hal_process_noisefloor
[ 2823.991575] ath_pci: disagrees about version of symbol ath_hal_computetxtime
[ 2823.991579] ath_pci: Unknown symbol ath_hal_computetxtime
[ 2823.991916] ath_pci: disagrees about version of symbol ath_hal_mhz2ieee
[ 2823.991920] ath_pci: Unknown symbol ath_hal_mhz2ieee
[ 2823.992193] ath_pci: Unknown symbol _ath_hal_detach
[ 2823.993696] ath_pci: disagrees about version of symbol ath_hal_init_channels
[ 2823.993700] ath_pci: Unknown symbol ath_hal_init_channels
[ 2823.993988] ath_pci: disagrees about version of symbol ath_hal_getwirelessmodes
[ 2823.993992] ath_pci: Unknown symbol ath_hal_getwirelessmodes
[ 3041.693306] ath_pci: disagrees about version of symbol _ath_hal_attach
[ 3041.693316] ath_pci: Unknown symbol _ath_hal_attach
[ 3041.693493] ath_pci: disagrees about version of symbol ath_hal_process_noisefloor
[ 3041.693497] ath_pci: Unknown symbol ath_hal_process_noisefloor
[ 3041.693857] ath_pci: disagrees about version of symbol ath_hal_computetxtime
[ 3041.693862] ath_pci: Unknown symbol ath_hal_computetxtime
[ 3041.694200] ath_pci: disagrees about version of symbol ath_hal_mhz2ieee
[ 3041.694205] ath_pci: Unknown symbol ath_hal_mhz2ieee
[ 3041.694483] ath_pci: Unknown symbol _ath_hal_detach
[ 3041.695855] ath_pci: disagrees about version of symbol ath_hal_init_channels
[ 3041.695861] ath_pci: Unknown symbol ath_hal_init_channels
[ 3041.696149] ath_pci: disagrees about version of symbol ath_hal_getwirelessmodes
[ 3041.696155] ath_pci: Unknown symbol ath_hal_getwirelessmodes
[ 3086.099028] ath_pci: disagrees about version of symbol _ath_hal_attach
[ 3086.099038] ath_pci: Unknown symbol _ath_hal_attach
[ 3086.099206] ath_pci: disagrees about version of symbol ath_hal_process_noisefloor
[ 3086.099211] ath_pci: Unknown symbol ath_hal_process_noisefloor
[ 3086.099574] ath_pci: disagrees about version of symbol ath_hal_computetxtime
[ 3086.099577] ath_pci: Unknown symbol ath_hal_computetxtime
[ 3086.099918] ath_pci: disagrees about version of symbol ath_hal_mhz2ieee
[ 3086.099921] ath_pci: Unknown symbol ath_hal_mhz2ieee
[ 3086.100231] ath_pci: Unknown symbol _ath_hal_detach
[ 3086.102736] ath_pci: disagrees about version of symbol ath_hal_init_channels
[ 3086.102743] ath_pci: Unknown symbol ath_hal_init_channels
[ 3086.103031] ath_pci: disagrees about version of symbol ath_hal_getwirelessmodes
[ 3086.103036] ath_pci: Unknown symbol ath_hal_getwirelessmodes
Dernière modification par onizou (Le 25/10/2007, à 00:45)
Hors ligne
#19 Le 25/10/2007, à 00:42
- Mornagest
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
Essaie de réinstaller ta version de noyau : sudo aptitude reinstall linux-image-`uname -r`
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne
#20 Le 25/10/2007, à 00:55
- onizou
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
Merciiiiiii!!!!! J'ai fais ce que tu m'as dit, puis j'ai redémarré, et enfin suivit à nouveau le tutoriel de Bast, et ça fonctionne à nouveau!
Je vais redémarrer mon ordinateur plusieurs fois pour voir si le wifi ne disparaîtra pas encore une fois!
Édition; Ça fonctionne toujours!!! Je ne vais plus bidouiller quoi que ce soit! J'aurai juste deux questions car j'aimerais comprendre: pourquoi le module qui posait problème avait disparu? et il se lance tout seul au démarrage maintenant?
Dernière modification par onizou (Le 25/10/2007, à 01:09)
Hors ligne
#21 Le 25/10/2007, à 10:27
- Mornagest
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
Il n'a pas disparu, mais comme il avait été compilé avec les anciens linux-headers, il n'était plus en fonctionnement sur le nouveau noyau. Note que tu devras probablement refaire cette manip' à chaque changement de noyau...
Pourquoi il se charge automatiquement au démarrage, je l'ignore, mais je suppose que c'est inclus dans les sources du module... si on n'en a pas besoin, on ne le compile pas
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne
#22 Le 25/10/2007, à 11:27
- onizou
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
À nouveau, en démarrant mon ordi ce matin, Ubuntu ne sait plus utiliser ma puce wifi
nizou@Pikmin-Noir:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=7.10
DISTRIB_CODENAME=gutsy
DISTRIB_DESCRIPTION="Ubuntu 7.10"
nizou@Pikmin-Noir:~$ lsusb
Bus 005 Device 004: ID 05ac:8300 Apple Computer, Inc.
Bus 005 Device 001: ID 0000:0000
Bus 002 Device 002: ID 04fc:0003 Sunplus Technology Co., Ltd CM1092 Optical Scroller Mouse
Bus 002 Device 001: ID 0000:0000
Bus 004 Device 003: ID 05ac:8205 Apple Computer, Inc.
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 05ac:8240 Apple Computer, Inc.
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 004: ID 05ac:021b Apple Computer, Inc.
Bus 001 Device 001: ID 0000:0000
nizou@Pikmin-Noir:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:07.0 Performance counters: Intel Corporation Unknown device 27a3 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 22)
02:00.0 Network controller: Atheros Communications, Inc. AR5418 802.11a/b/g/n Wireless PCI Express Adapter (rev 01)
03:03.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61)
nizou@Pikmin-Noir:~$ sudo lshw -C network
[sudo] password for nizou:
*-network
description: Ethernet interface
product: 88E8053 PCI-E Gigabit Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: eth0
version: 22
serial: 00:19:e3:36:60:ad
size: 100MB/s
capacity: 1GB/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.18 duplex=full firmware=N/A ip=192.168.0.11 latency=0 link=yes module=sky2 multicast=yes port=twisted pair speed=100MB/s
*-network UNCLAIMED
description: Network controller
product: AR5418 802.11a/b/g/n Wireless PCI Express Adapter
vendor: Atheros Communications, Inc.
physical id: 0
bus info: pci@0000:02:00.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list
configuration: latency=0
et voici dmesg:
[ 0.000000] 0: 256 -> 516344
[ 0.000000] On node 0 totalpages: 516247
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1123 pages reserved
[ 0.000000] DMA zone: 2820 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7003 pages used for memmap
[ 0.000000] DMA32 zone: 505245 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 508065
[ 0.000000] Kernel command line: root=UUID=ebdb6359-dd26-45cc-a757-a4d86a2a791d ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 56.697265] time.c: Detected 1995.000 MHz processor.
[ 56.698807] Console: colour VGA+ 80x25
[ 56.698828] Checking aperture...
[ 56.698843] Calgary: detecting Calgary via BIOS EBDA area
[ 56.698851] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 56.727042] Memory: 2024852k/2065376k available (2274k kernel code, 40136k reserved, 1181k data, 296k init)
[ 56.727096] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 56.807082] Calibrating delay using timer specific routine.. 3994.54 BogoMIPS (lpj=7989081)
[ 56.807120] Security Framework v1.0.0 initialized
[ 56.807128] SELinux: Disabled at boot.
[ 56.807370] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 56.808887] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 56.809597] Mount-cache hash table entries: 256
[ 56.809754] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 56.809758] CPU: L2 cache: 4096K
[ 56.809761] CPU 0/0 -> Node 0
[ 56.809763] using mwait in idle threads.
[ 56.809765] CPU: Physical Processor ID: 0
[ 56.809766] CPU: Processor Core ID: 0
[ 56.809774] CPU0: Thermal monitoring enabled (TM2)
[ 56.809786] SMP alternatives: switching to UP code
[ 56.810095] Early unpacking initramfs... done
[ 57.220556] ACPI: Core revision 20070126
[ 57.220602] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 57.263602] Using local APIC timer interrupts.
[ 57.313703] result 10390613
[ 57.313705] Detected 10.390 MHz APIC timer.
[ 57.314861] SMP alternatives: switching to SMP code
[ 57.314957] Booting processor 1/2 APIC 0x1
[ 57.325547] Initializing CPU#1
[ 57.402748] Calibrating delay using timer specific routine.. 3990.18 BogoMIPS (lpj=7980366)
[ 57.402757] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 57.402759] CPU: L2 cache: 4096K
[ 57.402762] CPU 1/1 -> Node 0
[ 57.402764] CPU: Physical Processor ID: 0
[ 57.402765] CPU: Processor Core ID: 1
[ 57.402772] CPU1: Thermal monitoring enabled (TM2)
[ 57.403365] Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 57.403404] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 57.426753] Brought up 2 CPUs
[ 57.627964] migration_cost=30
[ 57.628162] NET: Registered protocol family 16
[ 57.628251] ACPI: bus type pci registered
[ 57.628258] PCI: Using configuration type 1
[ 57.629297] ACPI: EC: Found ECDT
[ 57.630825] ACPI: System BIOS is requesting _OSI(Linux)
[ 57.630827] ACPI: Please test with "acpi_osi=!Linux"
[ 57.630829] Please send dmidecode to linux-acpi@vger.kernel.org
[ 57.631221] ACPI: Interpreter enabled
[ 57.631224] ACPI: (supports S0 S3 S4 S5)
[ 57.631243] ACPI: Using IOAPIC for interrupt routing
[ 57.640229] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 57.640341] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 57.640351] PCI: Probing PCI hardware (bus 00)
[ 57.641133] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 57.641137] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[ 57.642068] PCI: Transparent bridge - 0000:00:1e.0
[ 57.642135] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 57.642458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 57.642582] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 57.642751] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 57.649693] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 57.649787] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 57.649879] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 57.649970] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 57.650060] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 57.650151] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 57.650242] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 57.650331] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 57.650439] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 57.650449] pnp: PnP ACPI init
[ 57.650459] ACPI: bus type pnp registered
[ 57.654095] pnp: PnP ACPI: found 9 devices
[ 57.654098] ACPI: ACPI bus type pnp unregistered
[ 57.654187] PCI: Using ACPI for IRQ routing
[ 57.654190] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 57.654308] NET: Registered protocol family 8
[ 57.654311] NET: Registered protocol family 20
[ 57.654324] PCI-GART: No AMD northbridge found.
[ 57.654331] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 57.654335] hpet0: 3 64-bit timers, 14318180 Hz
[ 57.655540] pnp: 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 57.655544] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 57.655547] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 57.655550] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 57.655558] pnp: 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
[ 57.655921] PCI: Bridge: 0000:00:1c.0
[ 57.655924] IO window: 1000-1fff
[ 57.655931] MEM window: 90200000-902fffff
[ 57.655936] PREFETCH window: 90500000-905fffff
[ 57.655942] PCI: Bridge: 0000:00:1c.1
[ 57.655944] IO window: disabled.
[ 57.655950] MEM window: 90100000-901fffff
[ 57.655955] PREFETCH window: disabled.
[ 57.655961] PCI: Bridge: 0000:00:1e.0
[ 57.655962] IO window: disabled.
[ 57.655968] MEM window: 90000000-900fffff
[ 57.655973] PREFETCH window: disabled.
[ 57.656002] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 57.656009] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 57.656033] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 16 (level, low) -> IRQ 16
[ 57.656039] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 57.656053] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 57.656064] NET: Registered protocol family 2
[ 57.658608] Time: tsc clocksource has been installed.
[ 57.698662] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 57.699481] TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
[ 57.703160] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 57.704008] TCP: Hash tables configured (established 262144 bind 65536)
[ 57.704011] TCP reno registered
[ 57.714738] checking if image is initramfs... it is
[ 58.500883] Freeing initrd memory: 7200k freed
[ 58.505977] audit: initializing netlink socket (disabled)
[ 58.506001] audit(1193303473.752:1): initialized
[ 58.508410] VFS: Disk quotas dquot_6.5.1
[ 58.508468] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 58.508568] io scheduler noop registered
[ 58.508570] io scheduler anticipatory registered
[ 58.508572] io scheduler deadline registered
[ 58.508677] io scheduler cfq registered (default)
[ 58.508693] Boot video device is 0000:00:02.0
[ 58.511450] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 58.511509] assign_interrupt_mode Found MSI capability
[ 58.511513] Allocate Port Service[0000:00:1c.0:pcie00]
[ 58.511556] Allocate Port Service[0000:00:1c.0:pcie02]
[ 58.511663] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 58.511721] assign_interrupt_mode Found MSI capability
[ 58.511724] Allocate Port Service[0000:00:1c.1:pcie00]
[ 58.511756] Allocate Port Service[0000:00:1c.1:pcie02]
[ 58.535746] Real Time Clock Driver v1.12ac
[ 58.535987] hpet_resources: 0xfed00000 is busy
[ 58.536013] Linux agpgart interface v0.102 (c) Dave Jones
[ 58.536016] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 58.537094] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 58.537237] input: Macintosh mouse button emulation as /class/input/input0
[ 58.537365] PNP: No PS/2 controller found. Probing ports directly.
[ 58.538219] i8042.c: No controller found.
[ 58.538360] mice: PS/2 mouse device common for all mice
[ 58.538490] TCP cubic registered
[ 58.538550] NET: Registered protocol family 1
[ 58.538743] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 58.538751] Freeing unused kernel memory: 296k freed
[ 59.711587] AppArmor: AppArmor initialized<5>audit(1193303474.960:2): type=1505 info="AppArmor initialized" pid=1239
[ 59.716576] fuse init (API version 7.8)
[ 59.720514] Failure registering capabilities with primary security module.
[ 59.749044] ACPI: SSDT 7EEB8C10, 026C (r1 APPLE Cpu0Ist 3000 INTL 20050309)
[ 59.749250] ACPI: SSDT 7EEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
[ 59.749509] Monitor-Mwait will be used to enter C-1 state
[ 59.749513] Monitor-Mwait will be used to enter C-2 state
[ 59.749516] Monitor-Mwait will be used to enter C-3 state
[ 59.749520] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 59.749526] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 59.749778] ACPI: SSDT 7EEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
[ 59.749969] ACPI: SSDT 7EEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
[ 59.750262] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 59.750267] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 59.757423] Marking TSC unstable due to possible TSC halt in C2
[ 59.757462] Time: hpet clocksource has been installed.
[ 60.139387] usbcore: registered new interface driver usbfs
[ 60.139412] usbcore: registered new interface driver hub
[ 60.139436] usbcore: registered new device driver usb
[ 60.140084] USB Universal Host Controller Interface driver v3.0
[ 60.140184] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 60.140196] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 60.140200] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 60.140336] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 60.140370] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00002080
[ 60.140481] usb usb1: configuration #1 chosen from 1 choice
[ 60.140512] hub 1-0:1.0: USB hub found
[ 60.140517] hub 1-0:1.0: 2 ports detected
[ 60.214091] SCSI subsystem initialized
[ 60.229222] libata version 2.21 loaded.
[ 60.233075] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
[ 60.233087] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 60.233092] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 60.233236] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 60.233270] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
[ 60.233624] usb usb2: configuration #1 chosen from 1 choice
[ 60.233776] hub 2-0:1.0: USB hub found
[ 60.233782] hub 2-0:1.0: 2 ports detected
[ 60.252502] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 60.252511] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 60.252515] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 60.252665] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 60.252699] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[ 60.253054] usb usb3: configuration #1 chosen from 1 choice
[ 60.253218] hub 3-0:1.0: USB hub found
[ 60.253224] hub 3-0:1.0: 2 ports detected
[ 60.271213] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 60.271222] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 60.271226] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 60.271390] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 60.271421] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
[ 60.271807] usb usb4: configuration #1 chosen from 1 choice
[ 60.271986] hub 4-0:1.0: USB hub found
[ 60.271992] hub 4-0:1.0: 2 ports detected
[ 60.274201] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 60.298786] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 60.299185] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21
[ 60.300322] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 60.300329] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 60.300644] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 60.300683] ehci_hcd 0000:00:1d.7: debug port 1
[ 60.300690] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 60.300698] ehci_hcd 0000:00:1d.7: irq 21, io mem 0x90445400
[ 60.342319] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 60.342708] usb usb5: configuration #1 chosen from 1 choice
[ 60.342868] hub 5-0:1.0: USB hub found
[ 60.342875] hub 5-0:1.0: 8 ports detected
[ 60.350942] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[90000000-900007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 60.385315] ata_piix 0000:00:1f.1: version 2.11
[ 60.385334] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 60.385370] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 60.385776] scsi0 : ata_piix
[ 60.385953] scsi1 : ata_piix
[ 60.386149] ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000120b0 irq 14
[ 60.386154] ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000120b8 irq 15
[ 60.455759] usb 1-2: device not accepting address 2, error -71
[ 60.457505] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KBV9, max UDMA/66
[ 60.500387] ata1.00: configured for UDMA/66
[ 60.531861] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D KBV9 PQ: 0 ANSI: 5
[ 60.532249] ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]
[ 60.532254] ata_piix 0000:00:1f.2: invalid MAP value 0
[ 60.583211] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 19
[ 60.583255] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 60.583300] scsi2 : ata_piix
[ 60.583366] scsi3 : ata_piix
[ 60.583475] ata3: SATA max UDMA/133 cmd 0x00000000000120c8 ctl 0x00000000000120ee bmdma 0x00000000000120a0 irq 19
[ 60.583479] ata4: SATA max UDMA/133 cmd 0x00000000000120c0 ctl 0x00000000000120ea bmdma 0x00000000000120a8 irq 19
[ 60.635350] ata3.01: ATA-7: Hitachi HTS541616J9SA00, SB4AC7CP, max UDMA/133
[ 60.635357] ata3.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 60.636989] ata3.01: configured for UDMA/133
[ 60.689444] scsi 2:0:1:0: Direct-Access ATA Hitachi HTS54161 SB4A PQ: 0 ANSI: 5
[ 60.699568] sd 2:0:1:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 60.699580] sd 2:0:1:0: [sda] Write Protect is off
[ 60.699583] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 60.699597] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 60.699644] sd 2:0:1:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 60.699653] sd 2:0:1:0: [sda] Write Protect is off
[ 60.699656] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 60.699670] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 60.699673] sda:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe7bd6e4]
[ 60.707970] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 60.707973] Uniform CD-ROM driver Revision: 3.20
[ 60.708019] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 61.053916] usb 5-4: new high speed USB device using ehci_hcd and address 4
[ 61.105108] sda1 sda2 < sda5 >
[ 61.132175] sd 2:0:1:0: [sda] Attached SCSI disk
[ 61.135273] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 61.135291] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 61.186264] usb 5-4: configuration #1 chosen from 1 choice
[ 61.328680] Attempting manual resume
[ 61.328683] swsusp: Resume From Partition 8:5
[ 61.328685] PM: Checking swsusp image.
[ 61.328902] PM: Resume from disk failed.
[ 61.373960] kjournald starting. Commit interval 5 seconds
[ 61.373972] EXT3-fs: mounted filesystem with ordered data mode.
[ 61.880781] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 62.048282] usb 2-1: configuration #1 chosen from 1 choice
[ 62.286125] usb 1-2: new full speed USB device using uhci_hcd and address 4
[ 62.479625] usb 1-2: configuration #1 chosen from 1 choice
[ 62.728445] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 62.909057] usb 3-2: configuration #1 chosen from 1 choice
[ 63.146806] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 63.326256] usb 4-1: configuration #1 chosen from 1 choice
[ 69.020366] agpgart: Detected an Intel 945GM Chipset.
[ 69.022407] agpgart: Detected 16124K stolen memory.
[ 69.038427] agpgart: AGP aperture is 256M @ 0x80000000
[ 69.061355] intel_rng: FWH not detected
[ 69.281929] iTCO_vendor_support: vendor-support=0
[ 69.283662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 69.284079] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
[ 69.284488] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 69.306664] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 69.309390] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 69.449506] ath_hal: module license 'Proprietary' taints kernel.
[ 69.450776] usbcore: registered new interface driver hiddev
[ 69.451791] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 69.459496] input: USB OpticalWheel Mouse as /class/input/input1
[ 69.459560] input: USB HID v1.10 Mouse [USB OpticalWheel Mouse] on usb-0000:00:1d.1-1
[ 69.463794] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input2
[ 69.463830] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 69.467198] Linux video capture interface: v2.00
[ 69.467496] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input3
[ 69.467538] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 69.483927] input: HID 05ac:1000 as /class/input/input4
[ 69.483971] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 69.501925] input: HID 05ac:1000 as /class/input/input5
[ 69.501987] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 69.501997] usbcore: registered new interface driver usbhid
[ 69.502001] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 69.572951] wlan: 0.8.4.2 (svn r2717)
[ 69.688490] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 69.688505] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 69.689580] sky2 0000:01:00.0: v1.18 addr 0x90200000 irq 16 Yukon-EC (0xb6) rev 2
[ 69.689741] sky2 eth0: addr 00:19:e3:36:60:ad
[ 69.715444] ath_pci: disagrees about version of symbol _ath_hal_attach
[ 69.715449] ath_pci: Unknown symbol _ath_hal_attach
[ 69.715539] ath_pci: disagrees about version of symbol ath_hal_process_noisefloor
[ 69.715541] ath_pci: Unknown symbol ath_hal_process_noisefloor
[ 69.715732] ath_pci: disagrees about version of symbol ath_hal_computetxtime
[ 69.715735] ath_pci: Unknown symbol ath_hal_computetxtime
[ 69.715917] ath_pci: disagrees about version of symbol ath_hal_mhz2ieee
[ 69.715919] ath_pci: Unknown symbol ath_hal_mhz2ieee
[ 69.716075] ath_pci: Unknown symbol _ath_hal_detach
[ 69.716802] ath_pci: disagrees about version of symbol ath_hal_init_channels
[ 69.716804] ath_pci: Unknown symbol ath_hal_init_channels
[ 69.716957] ath_pci: disagrees about version of symbol ath_hal_getwirelessmodes
[ 69.716959] ath_pci: Unknown symbol ath_hal_getwirelessmodes
[ 69.804639] uvcvideo: iSight: firmware file AppleUSBVideoSupport not found.
[ 69.806785] appletouch Geyser 3 inited.
[ 69.806878] input: appletouch as /class/input/input6
[ 69.806974] usbcore: registered new interface driver appletouch
[ 69.806998] usbcore: registered new interface driver xpad
[ 69.807001] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[ 69.807014] usbcore: registered new interface driver isight
[ 69.807017] USB Video Class driver (v0.1.0)
[ 69.874606] input: Apple Mac mini infrared remote control driver as /class/input/input7
[ 69.877879] usbcore: registered new interface driver appleir
[ 69.877883] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/mactel/appleir.c: v1.1:USB Apple MacMini IR Receiver driver
[ 70.069343] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 70.070484] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 70.084372] hda_codec: STAC922x, Apple subsys_id=106b2200
[ 70.988841] loop: module loaded
[ 71.046353] lp: driver loaded but no devices found
[ 71.140168] usbcore: registered new interface driver uvcvideo
[ 71.140172] USB Video Class driver (v0.1.0)
[ 71.174728] Adding 5952040k swap on /dev/sda5. Priority:-1 extents:1 across:5952040k
[ 71.601519] EXT3 FS on sda1, internal journal
[ 73.499585] No dock devices found.
[ 73.507638] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 73.553092] input: Power Button (FF) as /class/input/input8
[ 73.553113] ACPI: Power Button (FF) [PWRF]
[ 73.553157] input: Lid Switch as /class/input/input9
[ 73.553177] ACPI: Lid Switch [LID0]
[ 73.553218] input: Power Button (CM) as /class/input/input10
[ 73.553231] ACPI: Power Button (CM) [PWRB]
[ 73.553271] input: Sleep Button (CM) as /class/input/input11
[ 73.553288] ACPI: Sleep Button (CM) [SLPB]
[ 73.670524] ACPI: Battery Slot [BAT0] (battery present)
[ 73.692362] ACPI: AC Adapter [ADP1] (on-line)
[ 74.791378] ppdev: user-space parallel port driver
[ 74.982340] audit(1193303492.279:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5139 profile="/usr/sbin/cupsd"
[ 75.108783] sky2 eth0: enabling interface
[ 75.503734] Failure registering capabilities with primary security module.
[ 75.653186] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
[ 75.708850] Bluetooth: Core ver 2.11
[ 75.709097] NET: Registered protocol family 31
[ 75.709101] Bluetooth: HCI device and connection manager initialized
[ 75.709107] Bluetooth: HCI socket layer initialized
[ 75.725448] Bluetooth: L2CAP ver 2.8
[ 75.725454] Bluetooth: L2CAP socket layer initialized
[ 75.729530] Bluetooth: RFCOMM socket layer initialized
[ 75.729665] Bluetooth: RFCOMM TTY layer initialized
[ 75.729669] Bluetooth: RFCOMM ver 1.8
[ 75.929431] usb 4-1: USB disconnect, address 2
[ 76.073977] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 76.210068] usb 4-1: configuration #1 chosen from 1 choice
[ 76.302774] Bluetooth: HCI USB driver ver 2.9
[ 76.307899] usbcore: registered new interface driver hci_usb
[ 78.230245] NET: Registered protocol family 10
[ 78.230323] lo: Disabled Privacy Extensions
[ 78.230368] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 80.578857] [drm] Initialized drm 1.1.0 20060810
[ 80.582361] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 80.582752] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 227.419876] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
[ 227.425114] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 229.114732] NET: Registered protocol family 17
[ 234.261271] eth0: no IPv6 routers present
[ 258.284783] eth0: no IPv6 routers present
[ 791.545631] ath_pci: disagrees about version of symbol _ath_hal_attach
[ 791.545641] ath_pci: Unknown symbol _ath_hal_attach
[ 791.545814] ath_pci: disagrees about version of symbol ath_hal_process_noisefloor
[ 791.545818] ath_pci: Unknown symbol ath_hal_process_noisefloor
[ 791.546196] ath_pci: disagrees about version of symbol ath_hal_computetxtime
[ 791.546201] ath_pci: Unknown symbol ath_hal_computetxtime
[ 791.546542] ath_pci: disagrees about version of symbol ath_hal_mhz2ieee
[ 791.546546] ath_pci: Unknown symbol ath_hal_mhz2ieee
[ 791.546825] ath_pci: Unknown symbol _ath_hal_detach
[ 791.548239] ath_pci: disagrees about version of symbol ath_hal_init_channels
[ 791.548245] ath_pci: Unknown symbol ath_hal_init_channels
[ 791.548536] ath_pci: disagrees about version of symbol ath_hal_getwirelessmodes
[ 791.548542] ath_pci: Unknown symbol ath_hal_getwirelessmodes
Dernière modification par onizou (Le 25/10/2007, à 11:32)
Hors ligne
#23 Le 25/10/2007, à 16:27
- Mornagest
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
sudo modprobe ath_pci
Pour l'ajouter au démarrage : sudo gedit /etc/modules et ajoute ath_pci
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne
#24 Le 25/10/2007, à 18:35
- onizou
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
nizou@Pikmin-Noir:~$ sudo modprobe ath_pci
[sudo] password for nizou:
FATAL: Error inserting ath_pci (/lib/modules/2.6.22-14-generic/net/ath_pci.ko): Unknown symbol in module, or unknown parameter (see dmesg)
Ça me donne ça
Peut être que la version de MadWifi qui j'installe avec le tutoriel de Bast endommage le module ath_pci?
Dernière modification par onizou (Le 25/10/2007, à 18:36)
Hors ligne
#25 Le 25/10/2007, à 22:49
- Mornagest
Re : Le wifi sur Macbook Core2Duo sous Ubuntu 64?
Tu peux essayer ceci : http://archive.ubuntu.com/ubuntu/pool/universe/m/module-assistant/module-assistant_0.10.11_all.deb (désinstalle l'autre module compilé en faisant sudo make uninstall )
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne