12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

nam1962 · Le 26/03/2014, à 15:30

Depuis un an je n'ai jamais réussi à faire tourner rond la config graphique de mon envy M6 :

:~$ lspci | grep "VGA compatible controller"
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series]

Toutes mes tentatives d'installer fglrx se sont soldées par des plantages et même des besoins de tout réinstaller (plus moyen d'accéder à quoi que ce soit.)
Je suis donc privé de ma radéon.
Privé aussi de la soluce hybrid graphic d'Alberto Milone : http://albertomilone.com/?p=591
Récemment, suite à une maj en Trusty j'ai même du reinstaller en nomodeset.
En plus de ne pouvoir activer la Radeon, j'ai un souci de agpgart module.

voici mon dmesg :

[    0.000000] ACPI: SSDT 000000003afda000 000B22 (v01 HPQOEM 18A4     00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 000000003afd6000 001F1F (v01 HPQOEM 18A4     00001000 ACPI 00040000)
[    0.000000] ACPI: UEFI 000000003afd9000 00005C (v01 HPQOEM 18A4     00000000 HP   00040000)
[    0.000000] ACPI: BGRT 000000003afd8000 000038 (v01 HPQOEM 18A4     00000001 HP   00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x23f5fffff]
[    0.000000]   NODE_DATA [mem 0x23f5f7000-0x23f5fbfff]
[    0.000000]  [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880238c00000-ffff88023ebfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x23f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00087fff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3a4befff]
[    0.000000]   node   0: [mem 0x3afff000-0x3affffff]
[    0.000000]   node   0: [mem 0x100000000-0x23f5fffff]
[    0.000000] On node 0 totalpages: 1546311
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 135 pages reserved
[    0.000000]   DMA zone: 3975 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3659 pages used for memmap
[    0.000000]   DMA32 zone: 234176 pages, LIFO batch:31
[    0.000000]   Normal zone: 20440 pages used for memmap
[    0.000000]   Normal zone: 1308160 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x3a4bf000-0x3a8befff]
[    0.000000] PM: Registered nosave memory: [mem 0x3a8bf000-0x3aebefff]
[    0.000000] PM: Registered nosave memory: [mem 0x3aebf000-0x3afbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x3afbf000-0x3affefff]
[    0.000000] PM: Registered nosave memory: [mem 0x3b000000-0x3f9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x3fa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[    0.000000] e820: [mem 0x3fa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023f200000 s86336 r8192 d24256 u262144
[    0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1522013
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-19-generic root=UUID=16b1670b-e7b4-4ca1-ac93-07b3ec6dddd6 ro quiet splash nomodeset vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 5919676K/6185244K available (7320K kernel code, 1138K rwdata, 3384K rodata, 1336K init, 1440K bss, 265568K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-7.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 25165824 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2394.586 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.17 BogoMIPS (lpj=9578344)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000019] init_memory_mapping: [mem 0x3a4bf000-0x3a8befff]
[    0.000020]  [mem 0x3a4bf000-0x3a5fffff] page 4k
[    0.000022]  [mem 0x3a600000-0x3a7fffff] page 2M
[    0.000022]  [mem 0x3a800000-0x3a8befff] page 4k
[    0.000046] init_memory_mapping: [mem 0x3a8bf000-0x3aabefff]
[    0.000048]  [mem 0x3a8bf000-0x3aabefff] page 4k
[    0.033850] Security Framework initialized
[    0.033871] AppArmor: AppArmor initialized
[    0.033872] Yama: becoming mindful.
[    0.034449] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.036100] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.036822] Mount-cache hash table entries: 256
[    0.036987] Initializing cgroup subsys memory
[    0.036992] Initializing cgroup subsys devices
[    0.036993] Initializing cgroup subsys freezer
[    0.036995] Initializing cgroup subsys blkio
[    0.036996] Initializing cgroup subsys perf_event
[    0.036998] Initializing cgroup subsys hugetlb
[    0.037018] CPU: Physical Processor ID: 0
[    0.037019] CPU: Processor Core ID: 0
[    0.037023] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.037023] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.037026] mce: CPU supports 7 MCE banks
[    0.037037] CPU0: Thermal monitoring enabled (TM1)
[    0.037045] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.037045] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.037045] tlb_flushall_shift: 5
[    0.037162] Freeing SMP alternatives memory: 28K (ffffffff81e6c000 - ffffffff81e73000)
[    0.038606] ACPI: Core revision 20131115
[    0.046318] ACPI: All ACPI Tables successfully acquired
[    0.062732] ftrace: allocating 28370 entries in 111 pages
[    0.077359] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.117080] smpboot: CPU0: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
[    0.117088] TSC deadline timer enabled
[    0.119321] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.119329] ... version:                3
[    0.119331] ... bit width:              48
[    0.119332] ... generic registers:      4
[    0.119333] ... value mask:             0000ffffffffffff
[    0.119334] ... max period:             0000ffffffffffff
[    0.119335] ... fixed-purpose events:   3
[    0.119336] ... event mask:             000000070000000f
[    0.120898] x86: Booting SMP configuration:
[    0.134052] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.144640] CPU2 microcode updated early to revision 0x29, date = 2013-06-12
[    0.120900] .... node  #0, CPUs:      #1 #2 #3
[    0.160460] x86: Booted up 1 node, 4 CPUs
[    0.160463] smpboot: Total of 4 processors activated (19156.68 BogoMIPS)
[    0.163679] devtmpfs: initialized
[    0.166132] EVM: security.selinux
[    0.166134] EVM: security.SMACK64
[    0.166135] EVM: security.ima
[    0.166136] EVM: security.capability
[    0.166183] PM: Registering ACPI NVS region [mem 0x3aebf000-0x3afbefff] (1048576 bytes)
[    0.167016] pinctrl core: initialized pinctrl subsystem
[    0.167071] regulator-dummy: no parameters
[    0.167101] RTC time: 16:08:10, date: 03/26/14
[    0.167133] NET: Registered protocol family 16
[    0.167228] cpuidle: using governor ladder
[    0.167230] cpuidle: using governor menu
[    0.167267] ACPI: bus type PCI registered
[    0.167269] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.167328] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.167330] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.187706] PCI: Using configuration type 1 for base access
[    0.188556] bio: create slab <bio-0> at 0
[    0.188701] ACPI: Added _OSI(Module Device)
[    0.188703] ACPI: Added _OSI(Processor Device)
[    0.188704] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.188706] ACPI: Added _OSI(Processor Aggregator Device)
[    0.193366] ACPI: Executed 1 blocks of module-level executable AML code
[    0.198035] ACPI: SSDT 000000003ae19018 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20120913)
[    0.198578] ACPI: Dynamic OEM Table Load:
[    0.198580] ACPI: SSDT           (null) 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20120913)
[    0.200797] ACPI: SSDT 000000003ae5ba98 000303 (v01  PmRef    ApIst 00003000 INTL 20120913)
[    0.201365] ACPI: Dynamic OEM Table Load:
[    0.201367] ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20120913)
[    0.204695] ACPI: SSDT 000000003ae18d98 000119 (v01  PmRef    ApCst 00003000 INTL 20120913)
[    0.205232] ACPI: Dynamic OEM Table Load:
[    0.205234] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20120913)
[    0.209529] ACPI: Interpreter enabled
[    0.209536] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.209542] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.209556] ACPI: (supports S0 S3 S4 S5)
[    0.209558] ACPI: Using IOAPIC for interrupt routing
[    0.209584] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.212825] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.436828] ACPI: Power Resource [FN00] (off)
[    0.436942] ACPI: Power Resource [FN01] (off)
[    0.437050] ACPI: Power Resource [FN02] (off)
[    0.437155] ACPI: Power Resource [FN03] (off)
[    0.437261] ACPI: Power Resource [FN04] (off)
[    0.437914] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.437919] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.438034] \_SB_.PCI0:_OSC invalid UUID
[    0.438035] _OSC request data:1 1f 0 
[    0.438039] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.438504] PCI host bridge to bus 0000:00
[    0.438507] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.438509] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.438511] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.438513] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.438515] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.438517] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.438518] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.438520] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[    0.438522] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.438523] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.438525] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.438527] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.438528] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.438530] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.438532] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.438533] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.438535] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[    0.438537] pci_bus 0000:00: root bus resource [mem 0x3fa00000-0xfeafffff]
[    0.438545] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.438632] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.438664] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.438707] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.438739] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.438750] pci 0000:00:02.0: reg 0x10: [mem 0x61000000-0x613fffff 64bit]
[    0.438757] pci 0000:00:02.0: reg 0x18: [mem 0x50000000-0x5fffffff 64bit pref]
[    0.438761] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.438862] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.438887] pci 0000:00:14.0: reg 0x10: [mem 0x61700000-0x6170ffff 64bit]
[    0.438961] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.439030] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.439063] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.439089] pci 0000:00:16.0: reg 0x10: [mem 0x61714000-0x6171400f 64bit]
[    0.439169] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.439254] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.439276] pci 0000:00:1a.0: reg 0x10: [mem 0x61719000-0x617193ff]
[    0.439370] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.439430] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.439463] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.439481] pci 0000:00:1b.0: reg 0x10: [mem 0x61710000-0x61713fff 64bit]
[    0.439552] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.439601] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.439630] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.439711] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.439762] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.439791] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.439873] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.439928] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.439968] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.439991] pci 0000:00:1d.0: reg 0x10: [mem 0x61718000-0x617183ff]
[    0.440085] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.440157] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.440192] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.440368] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[    0.440388] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.440397] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    0.440405] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.440414] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    0.440423] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.440432] pci 0000:00:1f.2: reg 0x24: [mem 0x61717000-0x617177ff]
[    0.440480] pci 0000:00:1f.2: PME# supported from D3hot
[    0.440550] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.440567] pci 0000:00:1f.3: reg 0x10: [mem 0x61715000-0x617150ff 64bit]
[    0.440589] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
[    0.440730] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[    0.440741] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x4fffffff 64bit pref]
[    0.440750] pci 0000:01:00.0: reg 0x18: [mem 0x60000000-0x6001ffff 64bit]
[    0.440756] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
[    0.440766] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.440796] pci 0000:01:00.0: supports D1 D2
[    0.440862] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.447935] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.447944] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.447952] pci 0000:00:01.0:   bridge window [mem 0x60000000-0x60ffffff]
[    0.447962] pci 0000:00:01.0:   bridge window [mem 0x40000000-0x4fffffff 64bit pref]
[    0.448099] pci 0000:07:00.0: [10ec:5289] type 00 class 0xff0000
[    0.448121] pci 0000:07:00.0: reg 0x10: [mem 0x61600000-0x6160ffff]
[    0.448280] pci 0000:07:00.0: supports D1 D2
[    0.448282] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.448361] pci 0000:07:00.2: [10ec:8168] type 00 class 0x020000
[    0.448383] pci 0000:07:00.2: reg 0x10: [io  0x2000-0x20ff]
[    0.448419] pci 0000:07:00.2: reg 0x18: [mem 0x61404000-0x61404fff 64bit pref]
[    0.448442] pci 0000:07:00.2: reg 0x20: [mem 0x61400000-0x61403fff 64bit pref]
[    0.448537] pci 0000:07:00.2: supports D1 D2
[    0.448538] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.448589] pci 0000:07:00.2: System wakeup disabled by ACPI
[    0.455968] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.455978] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.455988] pci 0000:00:1c.0:   bridge window [mem 0x61600000-0x616fffff]
[    0.456003] pci 0000:00:1c.0:   bridge window [mem 0x61400000-0x614fffff 64bit pref]
[    0.456138] pci 0000:08:00.0: [1814:3290] type 00 class 0x028000
[    0.456160] pci 0000:08:00.0: reg 0x10: [mem 0x61510000-0x6151ffff]
[    0.456303] pci 0000:08:00.0: PME# supported from D0 D3hot
[    0.456334] pci 0000:08:00.0: System wakeup disabled by ACPI
[    0.456392] pci 0000:08:00.1: [1814:3298] type 00 class 0x0d1100
[    0.456413] pci 0000:08:00.1: reg 0x10: [mem 0x61500000-0x6150ffff]
[    0.456557] pci 0000:08:00.1: supports D1
[    0.456558] pci 0000:08:00.1: PME# supported from D0 D1 D3hot
[    0.464002] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.464018] pci 0000:00:1c.1:   bridge window [mem 0x61500000-0x615fffff]
[    0.536655] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.536709] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.536762] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.536813] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.536864] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.536915] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.536965] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.537015] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.537449] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.537455] ACPI: \_SB_.PCI0: notify handler is installed
[    0.537523] Found 1 acpi root devices
[    0.537561] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.537653] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.537658] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.537660] vgaarb: loaded
[    0.537661] vgaarb: bridge control possible 0000:01:00.0
[    0.537662] vgaarb: no bridge control possible 0000:00:02.0
[    0.537802] SCSI subsystem initialized
[    0.537852] libata version 3.00 loaded.
[    0.537868] ACPI: bus type USB registered
[    0.537882] usbcore: registered new interface driver usbfs
[    0.537889] usbcore: registered new interface driver hub
[    0.537910] usbcore: registered new device driver usb
[    0.538011] PCI: Using ACPI for IRQ routing
[    0.544649] PCI: pci_cache_line_size set to 64 bytes
[    0.544710] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    0.544712] e820: reserve RAM buffer [mem 0x3a4bf000-0x3bffffff]
[    0.544714] e820: reserve RAM buffer [mem 0x3b000000-0x3bffffff]
[    0.544715] e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
[    0.544788] NetLabel: Initializing
[    0.544790] NetLabel:  domain hash size = 128
[    0.544790] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.544803] NetLabel:  unlabeled traffic allowed by default
[    0.544858] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.544864] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.547898] Switched to clocksource hpet
[    0.552449] AppArmor: AppArmor Filesystem Enabled
[    0.552476] pnp: PnP ACPI init
[    0.552489] ACPI: bus type PNP registered
[    0.552523] pnp 00:00: [dma 4]
[    0.552541] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.552561] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.552658] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.552689] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.552729] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.552732] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.552734] system 00:04: [io  0xffff] has been reserved
[    0.552737] system 00:04: [io  0xffff] has been reserved
[    0.552739] system 00:04: [io  0x0400-0x0453] could not be reserved
[    0.552741] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.552743] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.552745] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.552748] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.552770] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.552816] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.552818] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.552850] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    0.552877] pnp 00:08: Plug and Play ACPI device, IDs SYN1e76 SYN1e00 SYN0002 PNP0f13 (active)
[    0.624141] pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active)
[    0.624258] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.624260] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.624262] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.624264] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.624266] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.624268] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.624270] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.624272] system 00:0a: [mem 0xff000000-0xff000fff] has been reserved
[    0.624274] system 00:0a: [mem 0xff010000-0xffffffff] could not be reserved
[    0.624276] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.624278] system 00:0a: [mem 0x3fa00000-0x3fa00fff] has been reserved
[    0.624281] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.624629] pnp 00:0b: disabling [mem 0x40000000-0x401fffff] because it overlaps 0000:00:01.0 BAR 15 [mem 0x40000000-0x4fffffff 64bit pref]
[    0.624635] pnp 00:0b: disabling [mem 0x40000000-0x401fffff disabled] because it overlaps 0000:01:00.0 BAR 0 [mem 0x40000000-0x4fffffff 64bit pref]
[    0.624660] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[    0.624663] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.624751] pnp: PnP ACPI: found 12 devices
[    0.624752] ACPI: bus type PNP unregistered
[    0.630882] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.630909] pci 0000:01:00.0: BAR 6: assigned [mem 0x60020000-0x6003ffff pref]
[    0.630912] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.630915] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.630918] pci 0000:00:01.0:   bridge window [mem 0x60000000-0x60ffffff]
[    0.630921] pci 0000:00:01.0:   bridge window [mem 0x40000000-0x4fffffff 64bit pref]
[    0.630925] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.630928] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.630933] pci 0000:00:1c.0:   bridge window [mem 0x61600000-0x616fffff]
[    0.630938] pci 0000:00:1c.0:   bridge window [mem 0x61400000-0x614fffff 64bit pref]
[    0.630945] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.630950] pci 0000:00:1c.1:   bridge window [mem 0x61500000-0x615fffff]
[    0.630960] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.630962] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.630964] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.630966] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.630968] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.630969] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.630971] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.630973] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.630974] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.630976] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.630978] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.630979] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.630981] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.630983] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.630985] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[    0.630986] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[    0.630988] pci_bus 0000:00: resource 20 [mem 0x3fa00000-0xfeafffff]
[    0.630990] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.630992] pci_bus 0000:01: resource 1 [mem 0x60000000-0x60ffffff]
[    0.630993] pci_bus 0000:01: resource 2 [mem 0x40000000-0x4fffffff 64bit pref]
[    0.630995] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.630997] pci_bus 0000:07: resource 1 [mem 0x61600000-0x616fffff]
[    0.630999] pci_bus 0000:07: resource 2 [mem 0x61400000-0x614fffff 64bit pref]
[    0.631001] pci_bus 0000:08: resource 1 [mem 0x61500000-0x615fffff]
[    0.631028] NET: Registered protocol family 2
[    0.631197] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.631355] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.631486] TCP: Hash tables configured (established 65536 bind 65536)
[    0.631510] TCP: reno registered
[    0.631523] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.631554] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.631631] NET: Registered protocol family 1
[    0.631645] pci 0000:00:02.0: Boot video device
[    1.016490] PCI: CLS 64 bytes, default 64
[    1.016554] Trying to unpack rootfs image as initramfs...
[    1.307276] Freeing initrd memory: 18352K (ffff880035b7e000 - ffff880036d6a000)
[    1.307281] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.307284] software IO TLB [mem 0x31b7e000-0x35b7e000] (64MB) mapped at [ffff880031b7e000-ffff880035b7dfff]
[    1.307325] Simple Boot Flag at 0x44 set to 0x1
[    1.307507] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[    1.307513] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[    1.307519] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[    1.307527] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[    1.307581] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.307582] Scanning for low memory corruption every 60 seconds
[    1.307857] Initialise system trusted keyring
[    1.307902] audit: initializing netlink socket (disabled)
[    1.307917] type=2000 audit(1395850091.280:1): initialized
[    1.333831] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.334845] zbud: loaded
[    1.334981] VFS: Disk quotas dquot_6.5.2
[    1.335017] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.335381] fuse init (API version 7.22)
[    1.335447] msgmni has been set to 11724
[    1.335491] Key type big_key registered
[    1.335909] Key type asymmetric registered
[    1.335911] Asymmetric key parser 'x509' registered
[    1.335938] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.335976] io scheduler noop registered
[    1.335979] io scheduler deadline registered (default)
[    1.336000] io scheduler cfq registered
[    1.336058] pcieport 0000:00:01.0: device [8086:0101] has invalid IRQ; check vendor BIOS
[    1.336182] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.336219] pcieport 0000:00:1c.0: device [8086:1e10] has invalid IRQ; check vendor BIOS
[    1.336337] pcieport 0000:00:1c.1: device [8086:1e12] has invalid IRQ; check vendor BIOS
[    1.336461] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.336473] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.336508] efifb: probing for efifb
[    1.336892] efifb: framebuffer at 0x50000000, mapped to 0xffffc90021400000, using 4160k, total 4160k
[    1.336894] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    1.336894] efifb: scrolling: redraw
[    1.336896] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.339453] Console: switching to colour frame buffer device 170x48
[    1.341850] fb0: EFI VGA frame buffer device
[    1.341859] intel_idle: MWAIT substates: 0x21120
[    1.341861] intel_idle: v0.4 model 0x2A
[    1.341862] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.341953] ipmi message handler version 39.2
[    1.342033] ACPI: AC Adapter [ACAD] (on-line)
[    1.342116] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0
[    1.342120] ACPI: Power Button [PWRB]
[    1.342161] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    1.342255] ACPI: Lid Switch [LID0]
[    1.342309] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.342312] ACPI: Power Button [PWRF]
[    1.342402] ACPI: Fan [FAN0] (off)
[    1.342472] ACPI: Fan [FAN1] (off)
[    1.342539] ACPI: Fan [FAN2] (off)
[    1.342618] ACPI: Fan [FAN3] (off)
[    1.342689] ACPI: Fan [FAN4] (off)
[    1.342760] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[    1.342769] pci 0000:00:00.0: no hotplug settings from platform
[    1.342771] pci 0000:00:00.0: using default PCI settings
[    1.342776] pcieport 0000:00:01.0: no hotplug settings from platform
[    1.342782] pci 0000:01:00.0: no hotplug settings from platform
[    1.342784] pci 0000:00:02.0: no hotplug settings from platform
[    1.342785] pci 0000:00:02.0: using default PCI settings
[    1.342790] pci 0000:00:14.0: no hotplug settings from platform
[    1.342791] pci 0000:00:14.0: using default PCI settings
[    1.342798] pci 0000:00:16.0: no hotplug settings from platform
[    1.342800] pci 0000:00:16.0: using default PCI settings
[    1.342807] pci 0000:00:1a.0: no hotplug settings from platform
[    1.342809] pci 0000:00:1a.0: using default PCI settings
[    1.342817] pci 0000:00:1b.0: no hotplug settings from platform
[    1.342819] pcieport 0000:00:1c.0: no hotplug settings from platform
[    1.342830] pci 0000:07:00.0: no hotplug settings from platform
[    1.342840] pci 0000:07:00.2: no hotplug settings from platform
[    1.342842] pcieport 0000:00:1c.1: no hotplug settings from platform
[    1.342853] pci 0000:08:00.0: no hotplug settings from platform
[    1.342862] pci 0000:08:00.1: no hotplug settings from platform
[    1.342865] pci 0000:00:1d.0: no hotplug settings from platform
[    1.342867] pci 0000:00:1d.0: using default PCI settings
[    1.342874] pci 0000:00:1f.0: no hotplug settings from platform
[    1.342875] pci 0000:00:1f.0: using default PCI settings
[    1.342884] pci 0000:00:1f.2: no hotplug settings from platform
[    1.342885] pci 0000:00:1f.2: using default PCI settings
[    1.342892] pci 0000:00:1f.3: no hotplug settings from platform
[    1.342893] pci 0000:00:1f.3: using default PCI settings
[    1.343374] thermal LNXTHERM:00: registered as thermal_zone0
[    1.343376] ACPI: Thermal Zone [TZ00] (71 C)
[    1.343610] thermal LNXTHERM:01: registered as thermal_zone1
[    1.343612] ACPI: Thermal Zone [TZ01] (71 C)
[    1.343664] thermal LNXTHERM:02: registered as thermal_zone2
[    1.343666] ACPI: Thermal Zone [TZ02] (28 C)
[    1.343696] GHES: HEST is not enabled!
[    1.343786] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.584829] [Firmware Bug]: battery: (dis)charge rate invalid.
[    1.584852] ACPI: Battery Slot [BAT1] (battery present)
[    1.584943] Linux agpgart interface v0.103
[    1.586678] brd: module loaded
[    1.587211] loop: module loaded
[    1.587498] libphy: Fixed MDIO Bus: probed
[    1.587569] tun: Universal TUN/TAP device driver, 1.6
[    1.587570] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.587608] PPP generic driver version 2.4.2
[    1.587641] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.587645] ehci-pci: EHCI PCI platform driver
[    1.587765] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.587771] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.587785] ehci-pci 0000:00:1a.0: debug port 2
[    1.591681] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.591698] ehci-pci 0000:00:1a.0: irq 16, io mem 0x61719000
[    1.600810] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.600849] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.600851] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.600853] usb usb1: Product: EHCI Host Controller
[    1.600855] usb usb1: Manufacturer: Linux 3.13.0-19-generic ehci_hcd
[    1.600856] usb usb1: SerialNumber: 0000:00:1a.0
[    1.600986] hub 1-0:1.0: USB hub found
[    1.600993] hub 1-0:1.0: 2 ports detected
[    1.601166] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.601170] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.601183] ehci-pci 0000:00:1d.0: debug port 2
[    1.605088] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.605101] ehci-pci 0000:00:1d.0: irq 20, io mem 0x61718000
[    1.616822] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.616859] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.616861] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.616862] usb usb2: Product: EHCI Host Controller
[    1.616864] usb usb2: Manufacturer: Linux 3.13.0-19-generic ehci_hcd
[    1.616866] usb usb2: SerialNumber: 0000:00:1d.0
[    1.616985] hub 2-0:1.0: USB hub found
[    1.616992] hub 2-0:1.0: 2 ports detected
[    1.617066] ehci-platform: EHCI generic platform driver
[    1.617072] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.617073] ohci-pci: OHCI PCI platform driver
[    1.617080] ohci-platform: OHCI generic platform driver
[    1.617085] uhci_hcd: USB Universal Host Controller Interface driver
[    1.617194] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.617200] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.617295] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.617317] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    1.617380] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.617381] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.617383] usb usb3: Product: xHCI Host Controller
[    1.617385] usb usb3: Manufacturer: Linux 3.13.0-19-generic xhci_hcd
[    1.617386] usb usb3: SerialNumber: 0000:00:14.0
[    1.617498] hub 3-0:1.0: USB hub found
[    1.617508] hub 3-0:1.0: 4 ports detected
[    1.617810] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.617814] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.617852] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.617854] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.617856] usb usb4: Product: xHCI Host Controller
[    1.617857] usb usb4: Manufacturer: Linux 3.13.0-19-generic xhci_hcd
[    1.617859] usb usb4: SerialNumber: 0000:00:14.0
[    1.617969] hub 4-0:1.0: USB hub found
[    1.617979] hub 4-0:1.0: 4 ports detected
[    1.624983] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.667054] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.667058] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.667339] mousedev: PS/2 mouse device common for all mice
[    1.670591] rtc_cmos 00:05: RTC can wake from S4
[    1.670739] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.670769] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.670819] device-mapper: uevent: version 1.0.3
[    1.670900] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.670906] ledtrig-cpu: registered to indicate activity on CPUs
[    1.670908] EFI Variables Facility v0.08 2004-May-17
[    1.718470] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.913122] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.974845] TCP: cubic registered
[    1.974919] NET: Registered protocol family 10
[    1.975062] NET: Registered protocol family 17
[    1.975073] Key type dns_resolver registered
[    1.975582] Loading compiled-in X.509 certificates
[    1.976503] Loaded X.509 cert 'Magrathea: Glacier signing key: 21129319b0aadfa0b3fd115fdb0c4a5e269401d4'
[    1.976520] registered taskstats version 1
[    1.979303] Key type trusted registered
[    1.981244] Key type encrypted registered
[    1.983087] AppArmor: AppArmor sha1 policy hashing enabled
[    1.983091] IMA: No TPM chip found, activating TPM-bypass!
[    1.983490]   Magic number: 6:696:136
[    1.983504] block ram1: hash matches
[    1.983589] rtc_cmos 00:05: setting system clock to 2014-03-26 16:08:12 UTC (1395850092)
[    1.984199] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.984201] EDD information not available.
[    1.984237] PM: Hibernation image not present or could not be loaded.
[    1.985579] Freeing unused kernel memory: 1336K (ffffffff81d1e000 - ffffffff81e6c000)
[    1.985581] Write protecting the kernel read-only data: 12288k
[    1.987616] Freeing unused kernel memory: 860K (ffff880002729000 - ffff880002800000)
[    1.989228] Freeing unused kernel memory: 712K (ffff880002b4e000 - ffff880002c00000)
[    2.001811] systemd-udevd[125]: starting version 204
[    2.022534] rtsx_pci 0000:07:00.0: irq 42 for MSI/MSI-X
[    2.022554] rtsx_pci 0000:07:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
[    2.026562] ahci 0000:00:1f.2: version 3.0
[    2.026749] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    2.028633] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.028643] r8169 0000:07:00.2: can't disable ASPM; OS doesn't have ASPM control
[    2.028881] r8169 0000:07:00.2: irq 44 for MSI/MSI-X
[    2.029046] r8169 0000:07:00.2 eth0: RTL8411 at 0xffffc9000006e000, 84:34:97:14:24:7b, XID 08800800 IRQ 44
[    2.029048] r8169 0000:07:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.041221] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl RAID mode
[    2.041227] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    2.045502] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.045508] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.045664] hub 1-1:1.0: USB hub found
[    2.045750] hub 1-1:1.0: 6 ports detected
[    2.058103] scsi0 : ahci
[    2.058212] scsi1 : ahci
[    2.058562] scsi2 : ahci
[    2.059758] scsi3 : ahci
[    2.059840] scsi4 : ahci
[    2.059916] scsi5 : ahci
[    2.059970] ata1: SATA max UDMA/133 abar m2048@0x61717000 port 0x61717100 irq 43
[    2.059974] ata2: SATA max UDMA/133 abar m2048@0x61717000 port 0x61717180 irq 43
[    2.059979] ata3: SATA max UDMA/133 abar m2048@0x61717000 port 0x61717200 irq 43
[    2.059982] ata4: DUMMY
[    2.059983] ata5: DUMMY
[    2.059985] ata6: DUMMY
[    2.157384] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.289720] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.289728] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.289993] hub 2-1:1.0: USB hub found
[    2.290079] hub 2-1:1.0: 8 ports detected
[    2.305517] tsc: Refined TSC clocksource calibration: 2394.564 MHz
[    2.377579] ata2: SATA link down (SStatus 0 SControl 300)
[    2.377624] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.377646] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.379311] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100
[    2.379322] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.379544] ata3.00: ATAPI: hp      DVD RAM UJ8C2, 1.00, max UDMA/133
[    2.381046] ata1.00: configured for UDMA/100
[    2.381195] ata3.00: configured for UDMA/133
[    2.381347] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54757 JE4O PQ: 0 ANSI: 5
[    2.381509] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    2.381513] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.381550] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.381563] sd 0:0:0:0: [sda] Write Protect is off
[    2.381567] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.381589] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.387267] scsi 2:0:0:0: CD-ROM            hp       DVD RAM UJ8C2    1.00 PQ: 0 ANSI: 5
[    2.391293] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.391302] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.391505] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.391583] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.417303]  sda: sda1 sda2 sda3 sda4
[    2.417670] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.457700] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[    2.477594] usb 3-2: New USB device found, idVendor=093a, idProduct=2510
[    2.477605] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.477611] usb 3-2: Product: USB Optical Mouse
[    2.477616] usb 3-2: Manufacturer: PixArt
[    2.477788] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.481369] hidraw: raw HID events driver (C) Jiri Kosina
[    2.484830] usbcore: registered new interface driver usbhid
[    2.484832] usbhid: USB HID core driver
[    2.486318] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input5
[    2.486428] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2/input0
[    2.589808] usb 3-4: new full-speed USB device number 3 using xhci_hcd
[    2.607379] usb 3-4: New USB device found, idVendor=138a, idProduct=0018
[    2.607390] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.607395] usb 3-4: SerialNumber: 47163a54f0d0
[    2.677789] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    2.827699] usb 1-1.1: New USB device found, idVendor=064e, idProduct=c33c
[    2.827703] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.827705] usb 1-1.1: Product: HP Truevision HD
[    2.827707] usb 1-1.1: Manufacturer: SuYin
[    2.827708] usb 1-1.1: SerialNumber: HF1019-P62A-OV03-REV0201
[    2.907344] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.306585] Switched to clocksource tsc
[    3.693552] random: init urandom read with 109 bits of entropy available
[    4.085263] random: nonblocking pool is initialized
[   13.922467] Adding 17577980k swap on /dev/sda3.  Priority:-1 extents:1 across:17577980k FS
[   14.062860] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.165308] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   14.178753] systemd-udevd[327]: starting version 204
[   14.260144] lp: driver loaded but no devices found
[   14.349303] hp_accel: laptop model unknown, using default axes configuration
[   14.380821] wmi: Mapper loaded
[   14.384936] lis3lv02d: 8 bits 3DC sensor found
[   14.401285] [drm] Initialized drm 1.1.0 20060810
[   14.402601] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[   14.410470] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   14.410479] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.410484] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIX 1 (20131115/utaddress-251)
[   14.410489] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
[   14.410494] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 3 (20131115/utaddress-251)
[   14.410499] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.410501] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIX 1 (20131115/utaddress-251)
[   14.410505] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
[   14.410510] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 3 (20131115/utaddress-251)
[   14.410514] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.410516] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   14.430292] cfg80211: Calling CRDA to update world regulatory domain
[   14.437119] [drm:drm_pci_agp_init] *ERROR* Cannot initialize the agpgart module.
[   14.455511] [drm] VGACON disable radeon kernel modesetting.
[   14.455514] [drm] radeon userspace modesetting enabled.
[   14.460060] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[   14.463750] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[   14.463931] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[   14.464252] pci 0000:01:00.0: enabling device (0000 -> 0003)
[   14.464437] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   14.464440] [drm] No driver support for vblank timestamp query.
[   14.464443] [drm] Initialized radeon 1.34.0 20080528 for 0000:01:00.0 on minor 0
[   14.470309] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.559908] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   14.572288] mute LED gpio 8 polarity 1
[   14.572474] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   14.572476]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.572477]    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[   14.572478]    mono: mono_out=0x0
[   14.572479]    inputs:
[   14.572481]      Internal Mic=0x11
[   14.572482]      Mic=0xa
[   14.605005] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   14.605097] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   14.605173] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   14.760502] type=1400 audit(1395850105.261:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=450 comm="apparmor_parser"
[   14.760511] type=1400 audit(1395850105.261:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=450 comm="apparmor_parser"
[   14.760517] type=1400 audit(1395850105.261:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=450 comm="apparmor_parser"
[   14.760526] type=1400 audit(1395850105.261:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=462 comm="apparmor_parser"
[   14.760534] type=1400 audit(1395850105.261:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=462 comm="apparmor_parser"
[   14.760541] type=1400 audit(1395850105.261:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=462 comm="apparmor_parser"
[   14.761045] type=1400 audit(1395850105.261:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=464 comm="apparmor_parser"
[   14.761052] type=1400 audit(1395850105.261:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=464 comm="apparmor_parser"
[   14.761057] type=1400 audit(1395850105.261:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=464 comm="apparmor_parser"
[   14.761102] type=1400 audit(1395850105.261:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=450 comm="apparmor_parser"
[   14.804490] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.814409] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   14.831711] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.958663] cfg80211: World regulatory domain updated:
[   14.958666] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.958668] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.958670] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.958671] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.958673] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.958674] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.016452] input: HP WMI hotkeys as /devices/virtual/input/input8
[   15.580177] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   15.959517] Linux video capture interface: v2.00
[   16.013328] uvcvideo: Found UVC 1.00 device HP Truevision HD (064e:c33c)
[   16.022123] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input12
[   16.022320] usbcore: registered new interface driver uvcvideo
[   16.022323] USB Video Class driver (1.1.1)
[   16.223488] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x26c00, board id: 2054, fw id: 1196324
[   16.346754] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   16.709111] init: udev-fallback-graphics main process (743) terminated with status 1
[   19.050159] init: failsafe main process (827) killed by TERM signal
[   19.513274] Bluetooth: Core ver 2.17
[   19.513298] NET: Registered protocol family 31
[   19.513301] Bluetooth: HCI device and connection manager initialized
[   19.513309] Bluetooth: HCI socket layer initialized
[   19.513313] Bluetooth: L2CAP socket layer initialized
[   19.513319] Bluetooth: SCO socket layer initialized
[   19.517459] Bluetooth: RFCOMM TTY layer initialized
[   19.517472] Bluetooth: RFCOMM socket layer initialized
[   19.517479] Bluetooth: RFCOMM ver 1.11
[   19.520702] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.520706] Bluetooth: BNEP filters: protocol multicast
[   19.520715] Bluetooth: BNEP socket layer initialized
[   19.741540] init: cups main process (988) killed by HUP signal
[   19.741553] init: cups main process ended, respawning
[   19.784429] audit_printk_skb: 135 callbacks suppressed
[   19.784434] type=1400 audit(1395850110.281:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=975 comm="apparmor_parser"
[   19.785278] type=1400 audit(1395850110.281:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=975 comm="apparmor_parser"
[   20.614044] type=1400 audit(1395850111.109:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1157 comm="apparmor_parser"
[   21.108385] r8169 0000:07:00.2 eth0: link down
[   21.108431] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.108721] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.110471] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[   21.302917] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[   21.357859] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.358160] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.577415] init: samba-ad-dc main process (1167) terminated with status 1
[   22.539529] wlan0: authenticate with 00:24:d4:d4:78:b4
[   22.539618] wlan0: send auth to 00:24:d4:d4:78:b4 (try 1/3)
[   22.543408] wlan0: authenticated
[   22.546652] wlan0: associate with 00:24:d4:d4:78:b4 (try 1/3)
[   22.550557] wlan0: RX AssocResp from 00:24:d4:d4:78:b4 (capab=0x411 status=0 aid=4)
[   22.550851] wlan0: associated
[   22.550860] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   25.784684] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[   26.225724] Non-volatile memory driver v1.3
[   26.510470] init: plymouth-stop pre-start process (1803) terminated with status 1
[   49.824021] type=1400 audit(1395850140.289:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2260 comm="apparmor_parser"
[   49.824031] type=1400 audit(1395850140.289:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2260 comm="apparmor_parser"
[   49.824460] type=1400 audit(1395850140.289:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2260 comm="apparmor_parser"
[ 1963.920520] [UFW BLOCK] IN=wlan0 OUT= MAC=a4:17:31:14:73:75:00:24:d4:ab:8f:19:08:00 SRC=192.168.0.254 DST=192.168.0.18 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=43120 LEN=301 
[ 1963.920975] [UFW BLOCK] IN=wlan0 OUT= MAC=a4:17:31:14:73:75:00:24:d4:ab:8f:19:08:00 SRC=192.168.0.254 DST=192.168.0.18 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42218 LEN=301 
[ 1998.995520] [UFW BLOCK] IN=wlan0 OUT= MAC=a4:17:31:14:73:75:00:24:d4:ab:8f:19:08:00 SRC=192.168.0.254 DST=192.168.0.18 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42938 LEN=301 
[ 1998.996898] [UFW BLOCK] IN=wlan0 OUT= MAC=a4:17:31:14:73:75:00:24:d4:ab:8f:19:08:00 SRC=192.168.0.254 DST=192.168.0.18 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=36392 LEN=301 
[ 2154.153579] [UFW BLOCK] IN=wlan0 OUT= MAC=a4:17:31:14:73:75:00:24:d4:ab:8f:19:08:00 SRC=192.168.0.254 DST=192.168.0.18 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=50517 LEN=301 
[ 2154.153796] [UFW BLOCK] IN=wlan0 OUT= MAC=a4:17:31:14:73:75:00:24:d4:ab:8f:19:08:00 SRC=192.168.0.254 DST=192.168.0.18 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=48721 LEN=301

Serai ravi d'un coup de main !

Dernière modification par nam1962 (Le 26/03/2014, à 18:59)

F50 · Le 27/03/2014, à 08:04

Salut nam,

Tu peux pas désactiver l'intel ou choisir quelle carte initialiser dans le BIOS? Y'a pas un nouveau firmware pour ton BIOS qui semble pourri ?

[ 14.410470] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 14.410479] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.410484] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIX 1 (20131115/utaddress-251)
[ 14.410489] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
[ 14.410494] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 3 (20131115/utaddress-251)
[ 14.410499] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.410501] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIX 1 (20131115/utaddress-251)
[ 14.410505] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
[ 14.410510] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 3 (20131115/utaddress-251)
[ 14.410514] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

Donne le retour de lspci -v

moko138 · Le 27/03/2014, à 08:53

Solution évidente :
Diminue dans ta signature le nombre des convertis.

Ça va, ça va : je sors.

F50 · Le 27/03/2014, à 08:56

Ouais, pis en plus c'est pas foutu d'installer un pilote dans pilotes additionnels.

nam1962 · Le 27/03/2014, à 09:22

Le Bios, je viens de le mettre à jour : c'est la dernière version dispo Il ne présente pas de réglage GPU.
Pour lspci :

:~$ lspci -v
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, fast devsel, latency 0
	Capabilities: <access denied>

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: 60000000-60ffffff
	Prefetchable memory behind bridge: 0000000040000000-000000004fffffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: fast devsel, IRQ 16
	Memory at 61000000 (64-bit, non-prefetchable) [size=4M]
	Memory at 50000000 (64-bit, prefetchable) [size=256M]
	I/O ports at 4000 [size=64]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>

00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, medium devsel, latency 0, IRQ 41
	Memory at 61700000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd

00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, fast devsel, latency 0, IRQ 45
	Memory at 61714000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me

00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, medium devsel, latency 0, IRQ 16
	Memory at 61719000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, fast devsel, latency 0, IRQ 46
	Memory at 61710000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: 61600000-616fffff
	Prefetchable memory behind bridge: 0000000061400000-00000000614fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
	Memory behind bridge: 61500000-615fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, medium devsel, latency 0, IRQ 20
	Memory at 61718000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04)
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, medium devsel, latency 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich

00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 42
	I/O ports at 4088 [size=8]
	I/O ports at 4094 [size=4]
	I/O ports at 4080 [size=8]
	I/O ports at 4090 [size=4]
	I/O ports at 4060 [size=32]
	Memory at 61717000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: medium devsel
	Memory at 61715000 (64-bit, non-prefetchable) [size=256]
	I/O ports at 4040 [size=32]

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series] (prog-if 00 [VGA controller])
	Subsystem: Hewlett-Packard Company Radeon HD 7670M
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at 40000000 (64-bit, prefetchable) [size=256M]
	Memory at 60000000 (64-bit, non-prefetchable) [size=128K]
	I/O ports at 3000 [size=256]
	Expansion ROM at 60020000 [disabled] [size=128K]
	Capabilities: <access denied>

07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01)
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, fast devsel, latency 0, IRQ 43
	Memory at 61600000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: rtsx_pci

07:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a)
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, fast devsel, latency 0, IRQ 44
	I/O ports at 2000 [size=256]
	Memory at 61404000 (64-bit, prefetchable) [size=4K]
	Memory at 61400000 (64-bit, prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169

08:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
	Subsystem: Hewlett-Packard Company Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo Adapter
	Flags: bus master, fast devsel, latency 0, IRQ 17
	Memory at 61510000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: rt2800pci

08:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth
	Subsystem: Hewlett-Packard Company Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo Adapter
	Flags: bus master, fast devsel, latency 0
	Memory at 61500000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>

C'est bien HP qui fournit des ordis et des bios pourris : voilà ce qui arrive à ceux qui tournent en W8 : http://h30478.www3.hp.com/t5/Ordinateur … d-p/225876 (j'ai le 1164sf, qui a manifestement la même revision bios et les mêmes cartes)
Pas mal, non ?

[edit] à tout hasard je viens de reflasher mon bios pour le passer de F25 en F24
Pas l'impression que ça change grand chose :

ACPI 00040000)
[    0.000000] ACPI: SSDT 000000003afda000 000B22 (v01 HPQOEM 18A4     00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 000000003afd6000 001F1F (v01 HPQOEM 18A4     00001000 ACPI 00040000)
[    0.000000] ACPI: UEFI 000000003afd9000 00005C (v01 HPQOEM 18A4     00000000 HP   00040000)
[    0.000000] ACPI: BGRT 000000003afd8000 000038 (v01 HPQOEM 18A4     00000001 HP   00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x23f5fffff]
[    0.000000]   NODE_DATA [mem 0x23f5f7000-0x23f5fbfff]
[    0.000000]  [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880238c00000-ffff88023ebfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x23f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00087fff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3a4befff]
[    0.000000]   node   0: [mem 0x3afff000-0x3affffff]
[    0.000000]   node   0: [mem 0x100000000-0x23f5fffff]
[    0.000000] On node 0 totalpages: 1546311
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 135 pages reserved
[    0.000000]   DMA zone: 3975 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3659 pages used for memmap
[    0.000000]   DMA32 zone: 234176 pages, LIFO batch:31
[    0.000000]   Normal zone: 20440 pages used for memmap
[    0.000000]   Normal zone: 1308160 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x3a4bf000-0x3a8befff]
[    0.000000] PM: Registered nosave memory: [mem 0x3a8bf000-0x3aebefff]
[    0.000000] PM: Registered nosave memory: [mem 0x3aebf000-0x3afbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x3afbf000-0x3affefff]
[    0.000000] PM: Registered nosave memory: [mem 0x3b000000-0x3f9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x3fa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[    0.000000] e820: [mem 0x3fa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023f200000 s86336 r8192 d24256 u262144
[    0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1522013
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-19-generic root=UUID=16b1670b-e7b4-4ca1-ac93-07b3ec6dddd6 ro quiet splash nomodeset vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 5919684K/6185244K available (7320K kernel code, 1138K rwdata, 3384K rodata, 1336K init, 1440K bss, 265560K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-7.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 25165824 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2394.740 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.48 BogoMIPS (lpj=9578960)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000018] init_memory_mapping: [mem 0x3a4bf000-0x3a8befff]
[    0.000020]  [mem 0x3a4bf000-0x3a5fffff] page 4k
[    0.000021]  [mem 0x3a600000-0x3a7fffff] page 2M
[    0.000022]  [mem 0x3a800000-0x3a8befff] page 4k
[    0.000046] init_memory_mapping: [mem 0x3a8bf000-0x3aabefff]
[    0.000047]  [mem 0x3a8bf000-0x3aabefff] page 4k
[    0.036477] Security Framework initialized
[    0.036497] AppArmor: AppArmor initialized
[    0.036498] Yama: becoming mindful.
[    0.037077] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.038730] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.039433] Mount-cache hash table entries: 256
[    0.039599] Initializing cgroup subsys memory
[    0.039604] Initializing cgroup subsys devices
[    0.039605] Initializing cgroup subsys freezer
[    0.039607] Initializing cgroup subsys blkio
[    0.039608] Initializing cgroup subsys perf_event
[    0.039610] Initializing cgroup subsys hugetlb
[    0.039630] CPU: Physical Processor ID: 0
[    0.039631] CPU: Processor Core ID: 0
[    0.039636] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.039636] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.039638] mce: CPU supports 7 MCE banks
[    0.039650] CPU0: Thermal monitoring enabled (TM1)
[    0.039658] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.039658] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.039658] tlb_flushall_shift: 5
[    0.039774] Freeing SMP alternatives memory: 28K (ffffffff81e6c000 - ffffffff81e73000)
[    0.041240] ACPI: Core revision 20131115
[    0.048944] ACPI: All ACPI Tables successfully acquired
[    0.063446] ftrace: allocating 28370 entries in 111 pages
[    0.078073] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.117795] smpboot: CPU0: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
[    0.117803] TSC deadline timer enabled
[    0.120035] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.120043] ... version:                3
[    0.120045] ... bit width:              48
[    0.120046] ... generic registers:      4
[    0.120047] ... value mask:             0000ffffffffffff
[    0.120048] ... max period:             0000ffffffffffff
[    0.120049] ... fixed-purpose events:   3
[    0.120050] ... event mask:             000000070000000f
[    0.121607] x86: Booting SMP configuration:
[    0.134762] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.145352] CPU2 microcode updated early to revision 0x29, date = 2013-06-12
[    0.121610] .... node  #0, CPUs:      #1 #2 #3
[    0.161173] x86: Booted up 1 node, 4 CPUs
[    0.161176] smpboot: Total of 4 processors activated (19157.92 BogoMIPS)
[    0.164415] devtmpfs: initialized
[    0.166870] EVM: security.selinux
[    0.166871] EVM: security.SMACK64
[    0.166872] EVM: security.ima
[    0.166873] EVM: security.capability
[    0.166921] PM: Registering ACPI NVS region [mem 0x3aebf000-0x3afbefff] (1048576 bytes)
[    0.167754] pinctrl core: initialized pinctrl subsystem
[    0.167808] regulator-dummy: no parameters
[    0.167839] RTC time:  8:06:13, date: 03/27/14
[    0.167871] NET: Registered protocol family 16
[    0.167966] cpuidle: using governor ladder
[    0.167968] cpuidle: using governor menu
[    0.168005] ACPI: bus type PCI registered
[    0.168007] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.168066] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.168068] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.188489] PCI: Using configuration type 1 for base access
[    0.189342] bio: create slab <bio-0> at 0
[    0.189486] ACPI: Added _OSI(Module Device)
[    0.189488] ACPI: Added _OSI(Processor Device)
[    0.189490] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.189491] ACPI: Added _OSI(Processor Aggregator Device)
[    0.194156] ACPI: Executed 1 blocks of module-level executable AML code
[    0.198730] ACPI: SSDT 000000003ae19018 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20111123)
[    0.199271] ACPI: Dynamic OEM Table Load:
[    0.199274] ACPI: SSDT           (null) 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20111123)
[    0.201509] ACPI: SSDT 000000003ae5ba98 000303 (v01  PmRef    ApIst 00003000 INTL 20111123)
[    0.202077] ACPI: Dynamic OEM Table Load:
[    0.202079] ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20111123)
[    0.205403] ACPI: SSDT 000000003ae18d98 000119 (v01  PmRef    ApCst 00003000 INTL 20111123)
[    0.205941] ACPI: Dynamic OEM Table Load:
[    0.205943] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20111123)
[    0.210244] ACPI: Interpreter enabled
[    0.210251] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.210257] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.210271] ACPI: (supports S0 S3 S4 S5)
[    0.210273] ACPI: Using IOAPIC for interrupt routing
[    0.210299] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.213542] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.437581] ACPI: Power Resource [FN00] (off)
[    0.437695] ACPI: Power Resource [FN01] (off)
[    0.437803] ACPI: Power Resource [FN02] (off)
[    0.437908] ACPI: Power Resource [FN03] (off)
[    0.438013] ACPI: Power Resource [FN04] (off)
[    0.438667] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.438672] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.438789] \_SB_.PCI0:_OSC invalid UUID
[    0.438790] _OSC request data:1 1f 0 
[    0.438794] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.439260] PCI host bridge to bus 0000:00
[    0.439263] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.439265] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.439266] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.439268] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.439270] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.439272] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.439273] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.439275] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[    0.439277] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.439278] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.439280] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.439282] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.439283] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.439285] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.439287] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.439288] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.439290] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[    0.439292] pci_bus 0000:00: root bus resource [mem 0x3fa00000-0xfeafffff]
[    0.439300] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.439387] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.439419] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.439463] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.439495] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.439506] pci 0000:00:02.0: reg 0x10: [mem 0x61000000-0x613fffff 64bit]
[    0.439513] pci 0000:00:02.0: reg 0x18: [mem 0x50000000-0x5fffffff 64bit pref]
[    0.439517] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.439618] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.439643] pci 0000:00:14.0: reg 0x10: [mem 0x61700000-0x6170ffff 64bit]
[    0.439718] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.439785] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.439819] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.439844] pci 0000:00:16.0: reg 0x10: [mem 0x61714000-0x6171400f 64bit]
[    0.439925] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.440009] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.440032] pci 0000:00:1a.0: reg 0x10: [mem 0x61719000-0x617193ff]
[    0.440126] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.440185] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.440219] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.440237] pci 0000:00:1b.0: reg 0x10: [mem 0x61710000-0x61713fff 64bit]
[    0.440308] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.440357] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.440386] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.440468] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.440519] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.440549] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.440632] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.440686] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.440726] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.440749] pci 0000:00:1d.0: reg 0x10: [mem 0x61718000-0x617183ff]
[    0.440843] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.440915] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.440949] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.441126] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[    0.441146] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.441154] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    0.441163] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.441172] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    0.441180] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.441190] pci 0000:00:1f.2: reg 0x24: [mem 0x61717000-0x617177ff]
[    0.441237] pci 0000:00:1f.2: PME# supported from D3hot
[    0.441307] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.441325] pci 0000:00:1f.3: reg 0x10: [mem 0x61715000-0x617150ff 64bit]
[    0.441347] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
[    0.441488] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[    0.441499] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x4fffffff 64bit pref]
[    0.441508] pci 0000:01:00.0: reg 0x18: [mem 0x60000000-0x6001ffff 64bit]
[    0.441514] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
[    0.441524] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.441554] pci 0000:01:00.0: supports D1 D2
[    0.441620] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.448691] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.448700] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.448707] pci 0000:00:01.0:   bridge window [mem 0x60000000-0x60ffffff]
[    0.448717] pci 0000:00:01.0:   bridge window [mem 0x40000000-0x4fffffff 64bit pref]
[    0.448856] pci 0000:07:00.0: [10ec:5289] type 00 class 0xff0000
[    0.448879] pci 0000:07:00.0: reg 0x10: [mem 0x61600000-0x6160ffff]
[    0.449037] pci 0000:07:00.0: supports D1 D2
[    0.449039] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.449118] pci 0000:07:00.2: [10ec:8168] type 00 class 0x020000
[    0.449139] pci 0000:07:00.2: reg 0x10: [io  0x2000-0x20ff]
[    0.449175] pci 0000:07:00.2: reg 0x18: [mem 0x61404000-0x61404fff 64bit pref]
[    0.449198] pci 0000:07:00.2: reg 0x20: [mem 0x61400000-0x61403fff 64bit pref]
[    0.449293] pci 0000:07:00.2: supports D1 D2
[    0.449295] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.449347] pci 0000:07:00.2: System wakeup disabled by ACPI
[    0.456724] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.456735] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.456745] pci 0000:00:1c.0:   bridge window [mem 0x61600000-0x616fffff]
[    0.456760] pci 0000:00:1c.0:   bridge window [mem 0x61400000-0x614fffff 64bit pref]
[    0.456896] pci 0000:08:00.0: [1814:3290] type 00 class 0x028000
[    0.456918] pci 0000:08:00.0: reg 0x10: [mem 0x61510000-0x6151ffff]
[    0.457062] pci 0000:08:00.0: PME# supported from D0 D3hot
[    0.457093] pci 0000:08:00.0: System wakeup disabled by ACPI
[    0.457134] pci 0000:08:00.1: [1814:3298] type 00 class 0x0d1100
[    0.457155] pci 0000:08:00.1: reg 0x10: [mem 0x61500000-0x6150ffff]
[    0.457299] pci 0000:08:00.1: supports D1
[    0.457300] pci 0000:08:00.1: PME# supported from D0 D1 D3hot
[    0.464754] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.464770] pci 0000:00:1c.1:   bridge window [mem 0x61500000-0x615fffff]
[    0.537420] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.537473] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.537527] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.537578] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.537628] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.537677] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.537727] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.537777] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.538212] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.538219] ACPI: \_SB_.PCI0: notify handler is installed
[    0.538286] Found 1 acpi root devices
[    0.538324] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.538418] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.538422] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.538424] vgaarb: loaded
[    0.538425] vgaarb: bridge control possible 0000:01:00.0
[    0.538426] vgaarb: no bridge control possible 0000:00:02.0
[    0.538567] SCSI subsystem initialized
[    0.538618] libata version 3.00 loaded.
[    0.538634] ACPI: bus type USB registered
[    0.538648] usbcore: registered new interface driver usbfs
[    0.538655] usbcore: registered new interface driver hub
[    0.538676] usbcore: registered new device driver usb
[    0.538779] PCI: Using ACPI for IRQ routing
[    0.545401] PCI: pci_cache_line_size set to 64 bytes
[    0.545463] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    0.545465] e820: reserve RAM buffer [mem 0x3a4bf000-0x3bffffff]
[    0.545466] e820: reserve RAM buffer [mem 0x3b000000-0x3bffffff]
[    0.545468] e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
[    0.545543] NetLabel: Initializing
[    0.545544] NetLabel:  domain hash size = 128
[    0.545545] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.545557] NetLabel:  unlabeled traffic allowed by default
[    0.545613] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.545619] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.548653] Switched to clocksource hpet
[    0.553237] AppArmor: AppArmor Filesystem Enabled
[    0.553263] pnp: PnP ACPI init
[    0.553277] ACPI: bus type PNP registered
[    0.553312] pnp 00:00: [dma 4]
[    0.553331] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.553351] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.553449] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.553481] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.553523] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.553525] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.553527] system 00:04: [io  0xffff] has been reserved
[    0.553531] system 00:04: [io  0xffff] has been reserved
[    0.553533] system 00:04: [io  0x0400-0x0453] could not be reserved
[    0.553535] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.553537] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.553539] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.553542] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.553564] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.553610] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.553613] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.553645] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    0.553672] pnp 00:08: Plug and Play ACPI device, IDs SYN1e76 SYN1e00 SYN0002 PNP0f13 (active)
[    0.624900] pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active)
[    0.625017] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.625019] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.625021] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.625023] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.625025] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.625027] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.625029] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.625031] system 00:0a: [mem 0xff000000-0xff000fff] has been reserved
[    0.625033] system 00:0a: [mem 0xff010000-0xffffffff] could not be reserved
[    0.625035] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.625037] system 00:0a: [mem 0x3fa00000-0x3fa00fff] has been reserved
[    0.625040] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.625385] pnp 00:0b: disabling [mem 0x40000000-0x401fffff] because it overlaps 0000:00:01.0 BAR 15 [mem 0x40000000-0x4fffffff 64bit pref]
[    0.625391] pnp 00:0b: disabling [mem 0x40000000-0x401fffff disabled] because it overlaps 0000:01:00.0 BAR 0 [mem 0x40000000-0x4fffffff 64bit pref]
[    0.625416] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[    0.625418] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.625506] pnp: PnP ACPI: found 12 devices
[    0.625508] ACPI: bus type PNP unregistered
[    0.631642] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.631670] pci 0000:01:00.0: BAR 6: assigned [mem 0x60020000-0x6003ffff pref]
[    0.631673] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.631675] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.631678] pci 0000:00:01.0:   bridge window [mem 0x60000000-0x60ffffff]
[    0.631681] pci 0000:00:01.0:   bridge window [mem 0x40000000-0x4fffffff 64bit pref]
[    0.631685] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.631688] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.631694] pci 0000:00:1c.0:   bridge window [mem 0x61600000-0x616fffff]
[    0.631698] pci 0000:00:1c.0:   bridge window [mem 0x61400000-0x614fffff 64bit pref]
[    0.631705] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.631711] pci 0000:00:1c.1:   bridge window [mem 0x61500000-0x615fffff]
[    0.631721] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.631723] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.631725] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.631727] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.631728] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.631730] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.631732] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.631733] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.631735] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.631737] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.631738] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.631740] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.631742] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.631743] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.631745] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[    0.631747] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[    0.631749] pci_bus 0000:00: resource 20 [mem 0x3fa00000-0xfeafffff]
[    0.631751] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.631752] pci_bus 0000:01: resource 1 [mem 0x60000000-0x60ffffff]
[    0.631754] pci_bus 0000:01: resource 2 [mem 0x40000000-0x4fffffff 64bit pref]
[    0.631756] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.631758] pci_bus 0000:07: resource 1 [mem 0x61600000-0x616fffff]
[    0.631760] pci_bus 0000:07: resource 2 [mem 0x61400000-0x614fffff 64bit pref]
[    0.631761] pci_bus 0000:08: resource 1 [mem 0x61500000-0x615fffff]
[    0.631789] NET: Registered protocol family 2
[    0.631958] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.632116] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.632246] TCP: Hash tables configured (established 65536 bind 65536)
[    0.632268] TCP: reno registered
[    0.632281] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.632312] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.632389] NET: Registered protocol family 1
[    0.632402] pci 0000:00:02.0: Boot video device
[    1.017248] PCI: CLS 64 bytes, default 64
[    1.017309] Trying to unpack rootfs image as initramfs...
[    1.258743] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
[    1.258744] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
[    1.258747] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
[    1.258748] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[    1.258749] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[    1.258757] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[    1.259749] CPU1: Core temperature/speed normal
[    1.259750] CPU3: Package temperature/speed normal
[    1.259751] CPU0: Core temperature/speed normal
[    1.259752] CPU2: Package temperature/speed normal
[    1.259754] CPU0: Package temperature/speed normal
[    1.259758] CPU1: Package temperature/speed normal
[    1.307885] Freeing initrd memory: 18352K (ffff880035b7f000 - ffff880036d6b000)
[    1.307891] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.307893] software IO TLB [mem 0x31b7f000-0x35b7f000] (64MB) mapped at [ffff880031b7f000-ffff880035b7efff]
[    1.307934] Simple Boot Flag at 0x44 set to 0x1
[    1.308113] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[    1.308119] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[    1.308125] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[    1.308132] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[    1.308186] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.308188] Scanning for low memory corruption every 60 seconds
[    1.308463] Initialise system trusted keyring
[    1.308509] audit: initializing netlink socket (disabled)
[    1.308523] type=2000 audit(1395907574.284:1): initialized
[    1.334417] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.335432] zbud: loaded
[    1.335568] VFS: Disk quotas dquot_6.5.2
[    1.335604] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.335969] fuse init (API version 7.22)
[    1.336034] msgmni has been set to 11724
[    1.336078] Key type big_key registered
[    1.336473] Key type asymmetric registered
[    1.336475] Asymmetric key parser 'x509' registered
[    1.336501] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.336535] io scheduler noop registered
[    1.336538] io scheduler deadline registered (default)
[    1.336559] io scheduler cfq registered
[    1.336617] pcieport 0000:00:01.0: device [8086:0101] has invalid IRQ; check vendor BIOS
[    1.336738] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.336774] pcieport 0000:00:1c.0: device [8086:1e10] has invalid IRQ; check vendor BIOS
[    1.336891] pcieport 0000:00:1c.1: device [8086:1e12] has invalid IRQ; check vendor BIOS
[    1.337018] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.337029] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.337065] efifb: probing for efifb
[    1.337469] efifb: framebuffer at 0x50000000, mapped to 0xffffc90021400000, using 4160k, total 4160k
[    1.337471] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    1.337472] efifb: scrolling: redraw
[    1.337473] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.340040] Console: switching to colour frame buffer device 170x48
[    1.342438] fb0: EFI VGA frame buffer device
[    1.342448] intel_idle: MWAIT substates: 0x21120
[    1.342450] intel_idle: v0.4 model 0x2A
[    1.342451] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.342541] ipmi message handler version 39.2
[    1.342621] ACPI: AC Adapter [ACAD] (on-line)
[    1.342702] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0
[    1.342706] ACPI: Power Button [PWRB]
[    1.342747] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    1.342851] ACPI: Lid Switch [LID0]
[    1.342891] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.342894] ACPI: Power Button [PWRF]
[    1.342948] ACPI: Fan [FAN0] (off)
[    1.342972] ACPI: Fan [FAN1] (off)
[    1.342994] ACPI: Fan [FAN2] (off)
[    1.343016] ACPI: Fan [FAN3] (off)
[    1.343038] ACPI: Fan [FAN4] (off)
[    1.343533] thermal LNXTHERM:00: registered as thermal_zone0
[    1.343535] ACPI: Thermal Zone [TZ00] (79 C)
[    1.343768] thermal LNXTHERM:01: registered as thermal_zone1
[    1.343770] ACPI: Thermal Zone [TZ01] (79 C)
[    1.343822] thermal LNXTHERM:02: registered as thermal_zone2
[    1.343824] ACPI: Thermal Zone [TZ02] (28 C)
[    1.343852] GHES: HEST is not enabled!
[    1.343941] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.405631] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[    1.405642] pci 0000:00:00.0: no hotplug settings from platform
[    1.405643] pci 0000:00:00.0: using default PCI settings
[    1.405649] pcieport 0000:00:01.0: no hotplug settings from platform
[    1.405655] pci 0000:01:00.0: no hotplug settings from platform
[    1.405658] pci 0000:00:02.0: no hotplug settings from platform
[    1.405659] pci 0000:00:02.0: using default PCI settings
[    1.405663] pci 0000:00:14.0: no hotplug settings from platform
[    1.405665] pci 0000:00:14.0: using default PCI settings
[    1.405672] pci 0000:00:16.0: no hotplug settings from platform
[    1.405674] pci 0000:00:16.0: using default PCI settings
[    1.405681] pci 0000:00:1a.0: no hotplug settings from platform
[    1.405683] pci 0000:00:1a.0: using default PCI settings
[    1.405690] pci 0000:00:1b.0: no hotplug settings from platform
[    1.405693] pcieport 0000:00:1c.0: no hotplug settings from platform
[    1.405703] pci 0000:07:00.0: no hotplug settings from platform
[    1.405713] pci 0000:07:00.2: no hotplug settings from platform
[    1.405716] pcieport 0000:00:1c.1: no hotplug settings from platform
[    1.405726] pci 0000:08:00.0: no hotplug settings from platform
[    1.405736] pci 0000:08:00.1: no hotplug settings from platform
[    1.405738] pci 0000:00:1d.0: no hotplug settings from platform
[    1.405740] pci 0000:00:1d.0: using default PCI settings
[    1.405748] pci 0000:00:1f.0: no hotplug settings from platform
[    1.405749] pci 0000:00:1f.0: using default PCI settings
[    1.405758] pci 0000:00:1f.2: no hotplug settings from platform
[    1.405759] pci 0000:00:1f.2: using default PCI settings
[    1.405765] pci 0000:00:1f.3: no hotplug settings from platform
[    1.405767] pci 0000:00:1f.3: using default PCI settings
[    1.585587] [Firmware Bug]: battery: (dis)charge rate invalid.
[    1.585609] ACPI: Battery Slot [BAT1] (battery present)
[    1.585697] Linux agpgart interface v0.103
[    1.587545] brd: module loaded
[    1.588054] loop: module loaded
[    1.588341] libphy: Fixed MDIO Bus: probed
[    1.588411] tun: Universal TUN/TAP device driver, 1.6
[    1.588413] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.588453] PPP generic driver version 2.4.2
[    1.588488] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.588491] ehci-pci: EHCI PCI platform driver
[    1.588613] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.588620] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.588634] ehci-pci 0000:00:1a.0: debug port 2
[    1.592552] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.592569] ehci-pci 0000:00:1a.0: irq 16, io mem 0x61719000
[    1.601567] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.601609] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.601611] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.601613] usb usb1: Product: EHCI Host Controller
[    1.601615] usb usb1: Manufacturer: Linux 3.13.0-19-generic ehci_hcd
[    1.601616] usb usb1: SerialNumber: 0000:00:1a.0
[    1.601709] hub 1-0:1.0: USB hub found
[    1.601717] hub 1-0:1.0: 2 ports detected
[    1.601894] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.601899] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.601911] ehci-pci 0000:00:1d.0: debug port 2
[    1.605808] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.605822] ehci-pci 0000:00:1d.0: irq 20, io mem 0x61718000
[    1.617579] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.617617] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.617619] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.617620] usb usb2: Product: EHCI Host Controller
[    1.617622] usb usb2: Manufacturer: Linux 3.13.0-19-generic ehci_hcd
[    1.617624] usb usb2: SerialNumber: 0000:00:1d.0
[    1.617741] hub 2-0:1.0: USB hub found
[    1.617747] hub 2-0:1.0: 2 ports detected
[    1.617823] ehci-platform: EHCI generic platform driver
[    1.617830] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.617831] ohci-pci: OHCI PCI platform driver
[    1.617838] ohci-platform: OHCI generic platform driver
[    1.617843] uhci_hcd: USB Universal Host Controller Interface driver
[    1.617953] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.617958] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.618053] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.618077] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    1.618140] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.618142] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.618143] usb usb3: Product: xHCI Host Controller
[    1.618145] usb usb3: Manufacturer: Linux 3.13.0-19-generic xhci_hcd
[    1.618147] usb usb3: SerialNumber: 0000:00:14.0
[    1.618259] hub 3-0:1.0: USB hub found
[    1.618269] hub 3-0:1.0: 4 ports detected
[    1.618567] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.618570] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.618608] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.618610] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.618612] usb usb4: Product: xHCI Host Controller
[    1.618614] usb usb4: Manufacturer: Linux 3.13.0-19-generic xhci_hcd
[    1.618615] usb usb4: SerialNumber: 0000:00:14.0
[    1.618728] hub 4-0:1.0: USB hub found
[    1.618738] hub 4-0:1.0: 4 ports detected
[    1.625739] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.665357] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.665361] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.665627] mousedev: PS/2 mouse device common for all mice
[    1.667298] rtc_cmos 00:05: RTC can wake from S4
[    1.667514] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.667548] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.667600] device-mapper: uevent: version 1.0.3
[    1.667775] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.667783] ledtrig-cpu: registered to indicate activity on CPUs
[    1.667785] EFI Variables Facility v0.08 2004-May-17
[    1.715896] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.913882] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.050415] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.050418] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.050691] hub 1-1:1.0: USB hub found
[    2.050791] hub 1-1:1.0: 6 ports detected
[    2.162094] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.224530] TCP: cubic registered
[    2.224603] NET: Registered protocol family 10
[    2.224746] NET: Registered protocol family 17
[    2.224754] Key type dns_resolver registered
[    2.225282] Loading compiled-in X.509 certificates
[    2.226210] Loaded X.509 cert 'Magrathea: Glacier signing key: 21129319b0aadfa0b3fd115fdb0c4a5e269401d4'
[    2.226228] registered taskstats version 1
[    2.229028] Key type trusted registered
[    2.231021] Key type encrypted registered
[    2.232799] AppArmor: AppArmor sha1 policy hashing enabled
[    2.232804] IMA: No TPM chip found, activating TPM-bypass!
[    2.233187]   Magic number: 6:920:119
[    2.233297] rtc_cmos 00:05: setting system clock to 2014-03-27 08:06:15 UTC (1395907575)
[    2.233912] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.233914] EDD information not available.
[    2.233950] PM: Hibernation image not present or could not be loaded.
[    2.235249] Freeing unused kernel memory: 1336K (ffffffff81d1e000 - ffffffff81e6c000)
[    2.235251] Write protecting the kernel read-only data: 12288k
[    2.237285] Freeing unused kernel memory: 860K (ffff880002729000 - ffff880002800000)
[    2.238880] Freeing unused kernel memory: 712K (ffff880002b4e000 - ffff880002c00000)
[    2.250971] systemd-udevd[126]: starting version 204
[    2.282695] ahci 0000:00:1f.2: version 3.0
[    2.282878] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    2.283437] rtsx_pci 0000:07:00.0: irq 43 for MSI/MSI-X
[    2.283451] rtsx_pci 0000:07:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 43
[    2.284067] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.284074] r8169 0000:07:00.2: can't disable ASPM; OS doesn't have ASPM control
[    2.284288] r8169 0000:07:00.2: irq 44 for MSI/MSI-X
[    2.284446] r8169 0000:07:00.2 eth0: RTL8411 at 0xffffc9000006e000, 84:34:97:14:24:7b, XID 08800800 IRQ 44
[    2.284448] r8169 0000:07:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.294460] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.294466] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.294746] hub 2-1:1.0: USB hub found
[    2.294832] hub 2-1:1.0: 8 ports detected
[    2.298184] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl RAID mode
[    2.298190] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    2.310210] tsc: Refined TSC clocksource calibration: 2394.560 MHz
[    2.314684] scsi0 : ahci
[    2.314769] scsi1 : ahci
[    2.314834] scsi2 : ahci
[    2.314905] scsi3 : ahci
[    2.314970] scsi4 : ahci
[    2.315032] scsi5 : ahci
[    2.315067] ata1: SATA max UDMA/133 abar m2048@0x61717000 port 0x61717100 irq 42
[    2.315071] ata2: SATA max UDMA/133 abar m2048@0x61717000 port 0x61717180 irq 42
[    2.315073] ata3: SATA max UDMA/133 abar m2048@0x61717000 port 0x61717200 irq 42
[    2.315074] ata4: DUMMY
[    2.315075] ata5: DUMMY
[    2.315077] ata6: DUMMY
[    2.462475] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[    2.482620] usb 3-2: New USB device found, idVendor=093a, idProduct=2510
[    2.482631] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.482645] usb 3-2: Product: USB Optical Mouse
[    2.482647] usb 3-2: Manufacturer: PixArt
[    2.482786] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.486291] hidraw: raw HID events driver (C) Jiri Kosina
[    2.489826] usbcore: registered new interface driver usbhid
[    2.489828] usbhid: USB HID core driver
[    2.491287] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input5
[    2.491416] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2/input0
[    2.634547] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.636600] ata3.00: ATAPI: hp      DVD RAM UJ8C2, 1.00, max UDMA/133
[    2.639166] ata3.00: configured for UDMA/133
[    2.642555] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.642596] ata2: SATA link down (SStatus 0 SControl 300)
[    2.644184] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100
[    2.644195] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.650606] usb 3-4: new full-speed USB device number 3 using xhci_hcd
[    2.666275] ata1.00: configured for UDMA/100
[    2.666543] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54757 JE4O PQ: 0 ANSI: 5
[    2.666709] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    2.666714] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.666731] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.666772] sd 0:0:0:0: [sda] Write Protect is off
[    2.666776] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.666810] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.667778] usb 3-4: New USB device found, idVendor=138a, idProduct=0018
[    2.667791] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.667805] usb 3-4: SerialNumber: 47163a54f0d0
[    2.668265] scsi 2:0:0:0: CD-ROM            hp       DVD RAM UJ8C2    1.00 PQ: 0 ANSI: 5
[    2.670543] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.670550] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.670667] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.670729] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.728536]  sda: sda1 sda2 sda3 sda4
[    2.729140] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.742613] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    2.892629] usb 1-1.1: New USB device found, idVendor=064e, idProduct=c33c
[    2.892640] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.892646] usb 1-1.1: Product: HP Truevision HD
[    2.892651] usb 1-1.1: Manufacturer: SuYin
[    2.892656] usb 1-1.1: SerialNumber: HF1019-P62A-OV03-REV0201
[    3.252189] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.311182] Switched to clocksource tsc
[    4.005037] random: init urandom read with 115 bits of entropy available
[    4.215347] random: nonblocking pool is initialized
[   14.968457] Adding 17577980k swap on /dev/sda3.  Priority:-1 extents:1 across:17577980k FS
[   15.031519] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.077740] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   15.089889] systemd-udevd[328]: starting version 204
[   15.151379] lp: driver loaded but no devices found
[   15.184701] hp_accel: laptop model unknown, using default axes configuration
[   15.360128] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   15.717060] lis3lv02d: 8 bits 3DC sensor found
[   15.727303] wmi: Mapper loaded
[   15.740017] [drm] Initialized drm 1.1.0 20060810
[   15.745957] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[   15.771120] [drm:drm_pci_agp_init] *ERROR* Cannot initialize the agpgart module.
[   15.780162] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   15.780171] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.780176] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIX 1 (20131115/utaddress-251)
[   15.780182] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
[   15.780186] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 3 (20131115/utaddress-251)
[   15.780190] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.780192] cfg80211: Calling CRDA to update world regulatory domain
[   15.780195] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIX 1 (20131115/utaddress-251)
[   15.780197] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
[   15.780201] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 3 (20131115/utaddress-251)
[   15.780206] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.780207] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   15.785491] [drm] VGACON disable radeon kernel modesetting.
[   15.785495] [drm] radeon userspace modesetting enabled.
[   15.785838] pci 0000:01:00.0: enabling device (0000 -> 0003)
[   15.786017] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.786020] [drm] No driver support for vblank timestamp query.
[   15.786023] [drm] Initialized radeon 1.34.0 20080528 for 0000:01:00.0 on minor 0
[   15.817713] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[   15.826992] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[   15.830758] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[   15.840556] type=1400 audit(1395907589.092:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=444 comm="apparmor_parser"
[   15.840566] type=1400 audit(1395907589.092:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=444 comm="apparmor_parser"
[   15.840572] type=1400 audit(1395907589.092:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=444 comm="apparmor_parser"
[   15.841090] type=1400 audit(1395907589.092:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=444 comm="apparmor_parser"
[   15.841097] type=1400 audit(1395907589.092:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=444 comm="apparmor_parser"
[   15.841354] type=1400 audit(1395907589.092:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=444 comm="apparmor_parser"
[   15.844799] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.877364] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   15.899390] mute LED gpio 8 polarity 1
[   15.899582] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   15.899585]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.899588]    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[   15.899589]    mono: mono_out=0x0
[   15.899591]    inputs:
[   15.899593]      Internal Mic=0x11
[   15.899596]      Mic=0xa
[   15.930918] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   15.931002] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   15.931079] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   15.979444] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.993922] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   16.016628] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   16.064819] cfg80211: World regulatory domain updated:
[   16.064825] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   16.064828] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.064830] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.064833] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.064835] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.064837] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.410404] input: HP WMI hotkeys as /devices/virtual/input/input11
[   17.308482] Linux video capture interface: v2.00
[   17.363223] uvcvideo: Found UVC 1.00 device HP Truevision HD (064e:c33c)
[   17.371761] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input12
[   17.371866] usbcore: registered new interface driver uvcvideo
[   17.371868] USB Video Class driver (1.1.1)
[   17.537263] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x26c00, board id: 2054, fw id: 1196324
[   17.662713] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[   18.010916] init: failsafe main process (766) killed by TERM signal
[   19.060935] type=1400 audit(1395907592.312:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=866 comm="apparmor_parser"
[   19.060946] type=1400 audit(1395907592.312:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium_browser" pid=866 comm="apparmor_parser"
[   19.061246] type=1400 audit(1395907592.312:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium_browser" pid=866 comm="apparmor_parser"
[   19.064796] type=1400 audit(1395907592.316:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=872 comm="apparmor_parser"
[   19.182683] Bluetooth: Core ver 2.17
[   19.182702] NET: Registered protocol family 31
[   19.182704] Bluetooth: HCI device and connection manager initialized
[   19.182713] Bluetooth: HCI socket layer initialized
[   19.182717] Bluetooth: L2CAP socket layer initialized
[   19.182722] Bluetooth: SCO socket layer initialized
[   19.186605] Bluetooth: RFCOMM TTY layer initialized
[   19.186616] Bluetooth: RFCOMM socket layer initialized
[   19.186621] Bluetooth: RFCOMM ver 1.11
[   19.431893] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.431897] Bluetooth: BNEP filters: protocol multicast
[   19.431905] Bluetooth: BNEP socket layer initialized
[   19.456728] init: cups main process (886) killed by HUP signal
[   19.456751] init: cups main process ended, respawning
[   19.848680] init: udev-fallback-graphics main process (958) terminated with status 1
[   21.242477] init: samba-ad-dc main process (1069) terminated with status 1
[   21.277249] r8169 0000:07:00.2 eth0: link down
[   21.277315] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.277670] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.279572] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[   21.291513] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[   21.338565] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.338840] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.481457] audit_printk_skb: 105 callbacks suppressed
[   21.481461] type=1400 audit(1395907594.728:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1189 comm="apparmor_parser"
[   22.475778] wlan0: authenticate with 00:24:d4:d4:78:b4
[   22.475866] wlan0: send auth to 00:24:d4:d4:78:b4 (try 1/3)
[   22.478253] wlan0: authenticated
[   22.479349] wlan0: associate with 00:24:d4:d4:78:b4 (try 1/3)
[   22.488071] wlan0: RX AssocResp from 00:24:d4:d4:78:b4 (capab=0x411 status=0 aid=3)
[   22.488278] wlan0: associated
[   22.488297] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   25.784279] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[   26.503806] Non-volatile memory driver v1.3
[   26.863267] init: plymouth-stop pre-start process (1796) terminated with status 1
[   49.238190] type=1400 audit(1395907622.472:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2261 comm="apparmor_parser"
[   49.238199] type=1400 audit(1395907622.472:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2261 comm="apparmor_parser"
[   49.238628] type=1400 audit(1395907622.472:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2261 comm="apparmor_parser"
[  236.100596] [UFW BLOCK] IN=wlan0 OUT= MAC=a4:17:31:14:73:75:00:24:d4:ab:8f:19:08:00 SRC=192.168.0.254 DST=192.168.0.18 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=44744 LEN=301 
[  236.100920] [UFW BLOCK] IN=wlan0 OUT= MAC=a4:17:31:14:73:75:00:24:d4:ab:8f:19:08:00 SRC=192.168.0.254 DST=192.168.0.18 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=58791 LEN=301

Dernière modification par nam1962 (Le 27/03/2014, à 10:13)

F50 · Le 27/03/2014, à 11:52

Et ben t'es pas dans la merde... Je vois pas bien quoi faire si le BIOS est pourri et y'a aucun réglage, surtout que le problème se situe exactement au niveau des ports PCIe dans le BIOS!

[ 15.780182] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/uta

Tu as le nouveau firmware ou c'est l'ancien là? Il faut continuer à regarder sur le net, quelqu'un a peut-être trouvé une contournement sur nunux.

Poste /var/log/Xorg.0.log

Dernière modification par fcn50 (Le 27/03/2014, à 11:54)

alca94 · Le 27/03/2014, à 12:00

@nam1962
il serait plus simple de repasser sous windows

michel_04 · Le 27/03/2014, à 12:02

Bonjour,

alca94 a écrit :

@nam1962
il serait plus simple de repasser sous windows

Je crois que c'est un conseil judicieux...

C'est de l'humour ;-)

A+

nam1962 · Le 27/03/2014, à 12:18

fcn50 a écrit :

Et ben t'es pas dans la merde... Je vois pas bien quoi faire si le BIOS est pourri et y'a aucun réglage, surtout que le problème se situe exactement au niveau des ports PCIe dans le BIOS!
[ 15.780182] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/uta
Tu as le nouveau firmware ou c'est l'ancien là? Il faut continuer à regarder sur le net, quelqu'un a peut-être trouvé une contournement sur nunux.
Poste /var/log/Xorg.0.log

Là je suis sur le F24, mon premier message était sous le F25.
De ce que je vois sur le net cela est signalé depuis... 2012 et l'un des commentaires est "c'"est juste un message, pas de problème lié".

@ alca & Michel : j'y ai bien pensé* mais si vous avez vu mon lien plus haut les gens ont le même type de problème graphique avec W8

*(même pas vrai, hahaha, vous avez eu peur !)

Bon, sérieusement, le souci de base (carte graphique non utilisable) est quand même agaçant !

alca94 · Le 27/03/2014, à 12:22

sur le lien plus haut on voit une solution (ou pas )
Il y a des ordinateurs qui peuvent balancer entre le mode Fixe et dynamique à partir du Bios et d'autres à partir de Windows ( Catalyst Control Center )
sur ubuntu on a pas de controle "catalyst" pour faire la même chose ?

F50 · Le 27/03/2014, à 12:30

alca94 a écrit :

sur ubuntu on a pas de controle "catalyst" pour faire la même chose ?

Catalyst il y a mais pas avec les mêmes fonctions que sur w$, ils brident leurs sales pilotes pour pas faire de l'ombre à boule et bill! Après on peut toujours essayer d'installer catalyst beta 3, si tu veux essayer, à tes risques et périls, bien entendu.

nam1962 · Le 27/03/2014, à 12:48

Tu parles de celle là ? http://support.amd.com/en-us/kb-article … river.aspx

moko138 · Le 27/03/2014, à 12:51

[   14.410470] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
(...)
[   14.410484] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIX 1 (20131115/utaddress-251)
(...)
[   14.410489] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)

etc (il y a une tripotée de lignes avec "20131115").
Comme cela est une façon linuxienne de dater les paquets, il faut :
- virer le paquet en question,
- l'identifier,
- et si sa fonction est nécessaire, lui trouver un substitut.
En fait, il y a deux paquets (utaddress-251 et hwxface-580) qui découlent de celui-ci :

[    0.041240] ACPI: Core revision 20131115

Core revision 20131115 suggère que le bios et cette version de linux ne sont pas compatibles ; en as-tu essayé d'autres, (Debian stable/sid/unstable etc.) ? Une 12.04.1 et une 14.04 ?

F50 · Le 27/03/2014, à 13:00

@ nam : Yep.

@ moko : C'est précisément ce qui merde et ça concerne le port PCI. Bonne idée, ou même Arch qui sont souvent à la pointe.

michel_04 · Le 27/03/2014, à 13:07

Re,

alca94 a écrit :

sur le lien plus haut on voit une solution (ou pas )
Il y a des ordinateurs qui peuvent balancer entre le mode Fixe et dynamique à partir du Bios et d'autres à partir de Windows ( Catalyst Control Center )
sur ubuntu on a pas de controle "catalyst" pour faire la même chose ?

Lorsque (sous 12.04) j'utilisais sur mon Thinkpad la solution AMD/Intel Graphique commutables (voir #128), à partir du Catalyst Control Center je pouvais choisir ma CG (Intel ou AMD) et redémarrer ma session graphique.
Pour passer à 14.04 j'ai désactivé ma carte AMD dans le BIOS, pas moyen de désactiver l'Intel intégrée au Core(TM) i5-2450M.
Sur un PC (Ubuntu 13.10) qu'on a upgradé (pour un joueur de ... 14 ans )avec un CPU i5 Haswell et MB ASUS, dans le BIOS on a pu désactiver la Intel HD 4600 pour monter une GeForce GTX 650.

A+

Dernière modification par michel_04 (Le 27/03/2014, à 13:09)

nam1962 · Le 27/03/2014, à 13:08

@moko : comme je l'indique dans le titre, j'ai testé sur 4 release.
Bon, je me sers quotidiennement de l'ordi, ça tourne, c'est lisible et rapide, mais il est agaçant de ne pouvoir tout exploiter.

@ fcn Je ferai un test sur manjaro pour voir, quand j'aurais le temps (pas tant de temps à consacrer à une nouvelle distrib cela dit, en plus tous mes "installé" sont en Xub)

[edit] j'ai essayé une livemanjaro : pas de live mais plantage du serveur X "ne trouve pas d'écran, tralala". Comme je ne sais pas ou on peut bien régler une manjaro en "nomodeset", je n'insiste pas des masses pour le moment

Dernière modification par nam1962 (Le 27/03/2014, à 13:44)

moko138 · Le 27/03/2014, à 13:52

nam1962 a écrit :

@moko : comme je l'indique dans le titre,

Veuille m'excuser : j'avais mal lu.

il est agaçant de ne pouvoir tout exploiter.

Si c'est ce portable, il est bien spécifié :

avec la batterie rondelle en option, vous pouvez tenir toute la nuit.

Il faudrait, avec Pierre DAC, demander au traducteur ce qu'il entendait par batterie rondelle, (peut-être sous-entendait-il que le fabricant pense vraiment profond au consommateur ?). Jusqu'à présent, je n'avais jamais pensé aux batteries de ce point de vue-là. Mais je vais tester ce soir si ça me fait vraiment tenir toute la nuit...

F50 · Le 27/03/2014, à 14:13

michel_04 a écrit :

Lorsque (sous 12.04) j'utilisais sur mon Thinkpad la solution AMD/Intel Graphique commutables (voir #128), à partir du Catalyst Control Center je pouvais choisir ma CG (Intel ou AMD) et redémarrer ma session graphique.

Pour une fois qu'ils se donnent de la peine, c'est à souligner! Mais fallait quand même être sacrément con pour inventer le coup du > deux CG, déjà qu'avec une seule, y'a du boulot avec ces usines à bugs...

@ moko : Si ça marche cette histoire d'option rondelle, tu mettras le lien pour passer commande!

moko138 · Le 27/03/2014, à 14:55

fcn50 a écrit :

@ moko : Si ça marche cette histoire d'option rondelle, tu mettras le lien pour passer commande!

D'après ces infos, il faut d'abord installer libdsk... (test à suivre)

nam1962 · Le 27/03/2014, à 15:04

moko138 a écrit :

fcn50 a écrit :
@ moko : Si ça marche cette histoire d'option rondelle, tu mettras le lien pour passer commande!
D'après ces infos, il faut d'abord installer libdsk... (test à suivre)

"Élargissez le cercle de vos connaissances" qu'ils disaient

Bande de trolls ! et ma Radeon alors ?

Dernière modification par nam1962 (Le 27/03/2014, à 15:04)

F50 · Le 27/03/2014, à 15:07

Tu me diras ça demain matin, une fois le test conclu et les protagonistes satisfaits ! Pour lbdsk, y'a un .deb ou c'est en PPA?

Ah! Pour le préchauffage, je suggère l'album :

Inside out de keith jarrett.

Dernière modification par fcn50 (Le 27/03/2014, à 15:12)

F50 · Le 27/03/2014, à 15:20

@ nam : Ben ta Radeon... Je crois qu'il va falloir mettre 40 aux convertis et repasser sous w$.

Je déconne, on va chercher une solution, si y'en a une.

nam1962 · Le 27/03/2014, à 15:23

fcn50 a écrit :

@ nam : Ben ta Radeon... Je crois qu'il va falloir mettre 40 aux convertis et repasser sous w$.
(...)

Sous OsX plutôt ! Comme tu as vu, cette merde ne fonctionne pas plus sous W$ (Ce serait une bonne occase de montrer la supériorité tech de notre jouet )

F50 · Le 27/03/2014, à 15:34

OsX, oh mon Dieu, la peste ou le choléra ! La supériorité n'est plus à démontrer, il faut trouver le moyen de contourner ce caca de bug !

F50 · Le 28/03/2014, à 11:04

Tu as essayé le 14.3 beta? Là sur le net y'a pas grand chose concernant ce problème.

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 26/03/2014, à 15:30

12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#2 Le 27/03/2014, à 08:04

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#3 Le 27/03/2014, à 08:53

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#4 Le 27/03/2014, à 08:56

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#5 Le 27/03/2014, à 09:22

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#6 Le 27/03/2014, à 11:52

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#7 Le 27/03/2014, à 12:00

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#8 Le 27/03/2014, à 12:02

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#9 Le 27/03/2014, à 12:18

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#10 Le 27/03/2014, à 12:22

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#11 Le 27/03/2014, à 12:30

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#12 Le 27/03/2014, à 12:48

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#13 Le 27/03/2014, à 12:51

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#14 Le 27/03/2014, à 13:00

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#15 Le 27/03/2014, à 13:07

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#16 Le 27/03/2014, à 13:08

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#17 Le 27/03/2014, à 13:52

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#18 Le 27/03/2014, à 14:13

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#19 Le 27/03/2014, à 14:55

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#20 Le 27/03/2014, à 15:04

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#21 Le 27/03/2014, à 15:07

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#22 Le 27/03/2014, à 15:20

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#23 Le 27/03/2014, à 15:23

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#24 Le 27/03/2014, à 15:34

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

#25 Le 28/03/2014, à 11:04

Re : 12.04 / 13.04 /13.10 / 14.04 problème Radeon HD 7500M/7600M & intel

Pied de page des forums