Pages : 1
#1 Le 04/04/2014, à 16:56
- atefsarraj
ubuntu 13.10 en dual bot avec windows 7
Bonjour à tous,
je me suis mis un défi de résoudre tout seul mon problème, mais je crois que je suis totalement perdu 
.
Bon j'explique, j'avais 2 partitions Windows (une nouvelle et une ancienne) , donc j'ai décidé de supprimer l'ancienne pour installer linux, mais je n'ai pas pu vu que Windows me dit tu peut pas ni effacer ou formater cette partition vu qu'elle est active.
donc j'ai l'ai rendu inactive après l'utilisation de quelque commande sur cmd. Et quand j'ai redémarré mon Pc, je n'avais plus de Grub. Alors j'ai procéder par l’installation de linux 13.10 sur cette partition mais le Pc démarre directement sur Linux. Donc j'ai installé Boot repair pour réparer mon Grub. Maintenant j'ai un Grub mais il ne détecte pas Windows ,
je colle le boot-info dont le lien Paste from boot-repair :
Ubuntu Pastebin
Paste from boot-repair at Fri, 4 Apr 2014 14:54:31 +0000
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector
732579840 of the same hard drive for core.img. core.img is at this
location and looks in partition 94 for .
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 13.10
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda3: __________________________________________________________________________
File system: BIOS Boot partition
Boot sector type: Grub2's core.img
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,465,149,167 1,465,149,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 732,579,839 732,577,792 Data partition (Windows/Linux)
/dev/sda2 732,581,888 1,465,147,391 732,565,504 Data partition (Linux)
/dev/sda3 732,579,840 732,581,887 2,048 BIOS Boot partition
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 D434527734525D14 ntfs
/dev/sda2 85300fe1-e66c-4bad-9371-8ae6e95e4f15 ext4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda2 / ext4 (rw,errors=remount-ro)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 85300fe1-e66c-4bad-9371-8ae6e95e4f15
else
search --no-floppy --fs-uuid --set=root 85300fe1-e66c-4bad-9371-8ae6e95e4f15
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=10
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-85300fe1-e66c-4bad-9371-8ae6e95e4f15' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 85300fe1-e66c-4bad-9371-8ae6e95e4f15
else
search --no-floppy --fs-uuid --set=root 85300fe1-e66c-4bad-9371-8ae6e95e4f15
fi
linux /boot/vmlinuz-3.11.0-19-generic root=UUID=85300fe1-e66c-4bad-9371-8ae6e95e4f15 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.11.0-19-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-85300fe1-e66c-4bad-9371-8ae6e95e4f15' {
menuentry 'Ubuntu, with Linux 3.11.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-19-generic-advanced-85300fe1-e66c-4bad-9371-8ae6e95e4f15' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 85300fe1-e66c-4bad-9371-8ae6e95e4f15
else
search --no-floppy --fs-uuid --set=root 85300fe1-e66c-4bad-9371-8ae6e95e4f15
fi
echo 'Loading Linux 3.11.0-19-generic ...'
linux /boot/vmlinuz-3.11.0-19-generic root=UUID=85300fe1-e66c-4bad-9371-8ae6e95e4f15 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.11.0-19-generic
}
menuentry 'Ubuntu, with Linux 3.11.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-19-generic-recovery-85300fe1-e66c-4bad-9371-8ae6e95e4f15' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 85300fe1-e66c-4bad-9371-8ae6e95e4f15
else
search --no-floppy --fs-uuid --set=root 85300fe1-e66c-4bad-9371-8ae6e95e4f15
fi
echo 'Loading Linux 3.11.0-19-generic ...'
linux /boot/vmlinuz-3.11.0-19-generic root=UUID=85300fe1-e66c-4bad-9371-8ae6e95e4f15 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.11.0-19-generic
}
menuentry 'Ubuntu, with Linux 3.11.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-advanced-85300fe1-e66c-4bad-9371-8ae6e95e4f15' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 85300fe1-e66c-4bad-9371-8ae6e95e4f15
else
search --no-floppy --fs-uuid --set=root 85300fe1-e66c-4bad-9371-8ae6e95e4f15
fi
echo 'Loading Linux 3.11.0-12-generic ...'
linux /boot/vmlinuz-3.11.0-12-generic root=UUID=85300fe1-e66c-4bad-9371-8ae6e95e4f15 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.11.0-12-generic
}
menuentry 'Ubuntu, with Linux 3.11.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-recovery-85300fe1-e66c-4bad-9371-8ae6e95e4f15' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 85300fe1-e66c-4bad-9371-8ae6e95e4f15
else
search --no-floppy --fs-uuid --set=root 85300fe1-e66c-4bad-9371-8ae6e95e4f15
fi
echo 'Loading Linux 3.11.0-12-generic ...'
linux /boot/vmlinuz-3.11.0-12-generic root=UUID=85300fe1-e66c-4bad-9371-8ae6e95e4f15 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.11.0-12-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 85300fe1-e66c-4bad-9371-8ae6e95e4f15
else
search --no-floppy --fs-uuid --set=root 85300fe1-e66c-4bad-9371-8ae6e95e4f15
fi
linux16 /boot/memtest86+.bin
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 85300fe1-e66c-4bad-9371-8ae6e95e4f15
else
search --no-floppy --fs-uuid --set=root 85300fe1-e66c-4bad-9371-8ae6e95e4f15
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=85300fe1-e66c-4bad-9371-8ae6e95e4f15 / ext4 errors=remount-ro 0 1
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
=============================== StdErr Messages: ===============================
cat: /tmp/BootInfo-9QQa4zKD/Tmp_Log: No such file or directory
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-04-04__14h54 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in installed-session (Ubuntu 13.10, saucy, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.11.0-19-generic root=UUID=85300fe1-e66c-4bad-9371-8ae6e95e4f15 ro quiet splash vt.handoff=7
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda2:The OS now in use - Ubuntu 13.10 CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="D434527734525D14" TYPE="ntfs"
/dev/sda2: UUID="85300fe1-e66c-4bad-9371-8ae6e95e4f15" TYPE="ext4"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Windows not detected by os-prober on sda1.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 أبر 4 12:19 grub.d
total 72
-rwxr-xr-x 1 root root 7850 أكت 10 18:48 00_header
-rwxr-xr-x 1 root root 5949 أغس 15 2013 05_debian_theme
-rwxr-xr-x 1 root root 11479 أكت 10 18:48 10_linux
-rwxr-xr-x 1 root root 10258 أكت 10 18:48 20_linux_xen
-rwxr-xr-x 1 root root 1798 يون 17 2013 20_memtest86+
-rwxr-xr-x 1 root root 11531 أكت 10 18:48 30_os-prober
-rwxr-xr-x 1 root root 1426 أكت 10 18:48 30_uefi-firmware
-rwxr-xr-x 1 root root 214 أكت 10 18:48 40_custom
-rwxr-xr-x 1 root root 216 أكت 10 18:48 41_custom
-rw-r--r-- 1 root root 483 أكت 10 18:48 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
EFI in dmesg.
[ 0.000000] ACPI: UEFI 0000000096ffd000 00236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /media/atef/D434527734525D14.
sda : GPT, BIOS_boot, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA TOSHIBA MQ01ABD0 (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 375GB 375GB ntfs Microsoft basic data msftdata
3 375GB 375GB 1049kB bios_grub
2 375GB 750GB 375GB ext4 Linux filesystem
=================== parted -lm:
BYT;
/dev/sda:750GB:scsi:512:4096:gpt:ATA TOSHIBA MQ01ABD0;
1:1049kB:375GB:375GB:ntfs:Microsoft basic data:msftdata;
3:375GB:375GB:1049kB:::bios_grub;
2:375GB:750GB:375GB:ext4:Linux filesystem:;
=================== mount:
/dev/sda2 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=atef)
/dev/sda1 on /media/atef/D434527734525D14 type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 3f aa 2b 00 00 00 00 |.........?.+....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 14 5d 52 34 77 52 34 d4 |.........]R4wR4.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 00 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda2 ext4 344G 3.9G 323G 2% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 3.9G 12K 3.9G 1% /dev
tmpfs tmpfs 781M 1.2M 780M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 3.9G 156K 3.9G 1% /run/shm
none tmpfs 100M 40K 100M 1% /run/user
/dev/sda1 fuseblk 350G 159G 191G 46% /media/atef/D434527734525D14
=================== fdisk -l:
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 1 1465149167 732574583+ ee GPT
Partition 1 does not start on physical sector boundary.
=================== Recommended repair
Recommended-Repair
This setting will reinstall the grub2 of sda2 into the MBR of sda.
Additional repair will be performed: unhide-bootmenu-10s fix-windows-boot
Quantity of real Windows: 1
WinSE in sda1
/media/atef/D434527734525D14/ may need repair.
/media/atef/D434527734525D14/bootmgr may need repair.
*******lspci -nnk | grep -iA3 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09)
Subsystem: Acer Incorporated [ALI] Device [1025:0647]
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04)
--
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107M [GeForce GT 730M] [10de:0fe1] (rev a1)
Subsystem: Acer Incorporated [ALI] Device [1025:0648]
Kernel driver in use: nouveau
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe [14e4:16b5] (rev 10)
*******
grub-install (GRUB) 2.00-19ubuntu2.1,grub-install (GRUB) 2.
Reinstall the GRUB of sda2 into the MBR of sda
Installation finished. No error reported.
grub-install /dev/sda: exit code of grub-install /dev/sda:0
update-grub
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-3.11.0-19-generic
Found initrd image: /boot/initrd.img-3.11.0-19-generic
Found linux image: /boot/vmlinuz-3.11.0-12-generic
Found initrd image: /boot/initrd.img-3.11.0-12-generic
Found memtest86+ image: /boot/memtest86+.bin
Unhide GRUB boot menu in sda2/boot/grub/grub.cfg
Boot successfully repaired.
You can now reboot your computer.
The boot files of [The OS now in use - Ubuntu 13.10] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition)Hors ligne
#2 Le 04/04/2014, à 17:14
- kalisto07
Re : ubuntu 13.10 en dual bot avec windows 7
Bonjour
il est signalé table de partition: Guid
hors grub est installé sur mbr (sda)
mais une table de partition Guid n'utilise pas le mbr du disque, il utilise une partition efi a la place.
donc il se peux qu'en corrigeant la table de partition (avec test-disk peut être) pour qu'elle soit reconnu en table ms-dos et non en guid cela résolve le problème après update-grub)
la table de partition est peut être reconnu comme hybride ou alors l'analyse automatique est fausse
est ce que ta carte mère peux booter en EFI ?
une autre piste : réparer le démarrage de windows, réinstaller grub2 sur la partition ext4 de linux (au lieu de sda), ajouter une entree grub2 dans windows avec easy-bcd qui pointe sur la partition ext4 (ou détection automatique)
sda3 je ne comprend pas trop ce qu'il fait la, pourquoi il est si grand, a quoi il sert.
windows 7 utilise par défaut une partition de 100 mo en debut de disque comme "partition boot" qui contient la base bcd
peut etre verifier si la partition w$ est marqué bootable ? (drapeau boot)
Dernière modification par kalisto07 (Le 04/04/2014, à 17:27)
Hors ligne
#3 Le 04/04/2014, à 17:33
- atefsarraj
Re : ubuntu 13.10 en dual bot avec windows 7
Merci Kalisto07 pour votre reponse rapide,
bon comment je sais ma carte mere qu'elle peut booter en EFI???
sinon j'ai installer test-disk avec apt, donc aprés la selection de mon disque dur, il m'a demandé de choisir le type de tabe de partition :
Please select the partition table type, press Enter when done.
[Intel ] Intel/PC partition
[EFI GPT] EFI GPT partition map (Mac i386, some x86_64...)
[Humax ] Humax partition table
[Mac ] Apple partition map
[None ] Non partitioned media
[Sun ] Sun Solaris partition
[XBox ] XBox partition
[Return ] Return to disk selectionje choisirai quoi .???
pour sda3 il n'est pas marqué bootable
Dernière modification par atefsarraj (Le 04/04/2014, à 17:35)
Hors ligne
#4 Le 04/04/2014, à 19:42
- kalisto07
Re : ubuntu 13.10 en dual bot avec windows 7
c'est en principe intel/pc qu'il te faut choisir.
pour savoir si ton pc est compatible efi, il faut regarder dans les options du bios si il y a des references a EFI ou UEFI ou SECUREBOOT ou LEGACY Boot ou Boot csm
si la table de partition est vraiment en guid (je pense que non) alors c'est EFI GPT (gpt =guid partition table)
si la partition en intel pc permet l'acces aux fichiers sous testdisk, alors il faut choisir write pour reecrire la table de partition correctement
attention une mauvaise manip peut bloquer l'acces au donnees
bien suivre le tuto
http://www.cgsecurity.org/wiki/TestDisk_Etape_par_Etape
une précaution basique consiste a sauvegarder les données importantes avant toute manip
portables tres recent = efi
portables tres anciens = bios mbr
Dernière modification par kalisto07 (Le 04/04/2014, à 19:46)
Hors ligne