#1 Le 11/10/2007, à 23:02
- coubi64
Update Feisty -> Gutsy : quelques "soucis"
Bonsoir à tous,
Gusty étant passé en RC, et impatient que je suis (sans crainte de perte de données, cela ne me dérange pas de réinstaller de zéro si nécessaire), j'ai upgradé ma Feisty vers Gusty.
Globalement ça fonctionne mais quelques pbs gênant:
1) J'ai l'applet avec les gouverneurs qui étant auparavant sélectionnée par défaut sur "performance" mais là au démarrage ça revient toujours sur "ondemand". Comment remettre l'option performance par défaut?
2) J'ai remis les 2 lignes pour ne pas avoir à taper le mot de passe du trousseau pour le Wifi mais je dois sélectionner à la main le ssid sur lequel se connecter pour avoir une connexion. Comment lui dire de se connecter par défaut à mon ssid?
3) Je n'ai plus les lignes qui défilent au démarrage indiquant les diverses étapes. J'ai juste un écran noir jusqu'au bureau de login. Comment rétablir ça?
4) Le PC est très lent (au démarrage) .... J'ai viré evms comme indiqué dans un des posts mais ça reste très très lent.....
Voilà c'est à peu près tout pour l'instant. Je vous laisse mon 'dmesg' pour avoir quelques pistes peut être:
frederic@PC-portable-PB:~$ dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@vernadsky) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Wed Oct 10 06:00:47 GMT 2007 (Ubuntu 2.6.22-14.43-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003bfef000 (usable)
[ 0.000000] BIOS-e820: 000000003bff0000 - 000000003bffffc0 (ACPI data)
[ 0.000000] BIOS-e820: 000000003bffffc0 - 000000003c000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 63MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 245743) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 245743
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 245743
[ 0.000000] On node 0 totalpages: 245743
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 127 pages used for memmap
[ 0.000000] HighMem zone: 16240 pages, LIFO batch:3
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00E6010 checksum 0
[ 0.000000] ACPI: RSDP 000E6010, 0014 (r0 OID_00)
[ 0.000000] ACPI: RSDT 3BFFC2D0, 002C (r1 INSYDE FACP_000 100 0000 10200)
[ 0.000000] ACPI: FACP 3BFFFB00, 0074 (r1 INSYDE FACP_000 100 0000 10200)
[ 0.000000] ACPI: DSDT 3BFFC310, 37E2 (r1 INSYDE PN800 1000 INTL 2002036)
[ 0.000000] ACPI: FACS 3BFFFFC0, 0040
[ 0.000000] ACPI: APIC 3BFFFB90, 0068 (r1 INSYDE APIC_000 30303030 0000 10200)
[ 0.000000] ACPI: BIOS age (400) fails cutoff (2000), acpi=force is required to enable ACPI
[ 0.000000] ACPI: acpi=force override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3c000000:c3f80000)
[ 0.000000] Built 1 zonelists. Total pages: 243824
[ 0.000000] Kernel command line: root=UUID=867d3dcb-4304-4f1c-96ee-96caa2245107 ro vga=791 pnpbios=off pci=biosirq acpi=force irqpoll quiet locale=fr_FR elevator=cfq
[ 0.000000] Misrouted IRQ fixup and polling support enabled
[ 0.000000] This may significantly impact system performance
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1492.840 MHz processor.
[ 10.250490] Console: colour dummy device 80x25
[ 10.251028] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 10.251627] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 10.290936] Memory: 962180k/982972k available (2015k kernel code, 20180k reserved, 916k data, 364k init, 65468k highmem)
[ 10.290947] virtual kernel memory layout:
[ 10.290949] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 10.290950] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 10.290952] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 10.290953] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 10.290955] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 10.290956] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 10.290958] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 10.290962] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 10.291010] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 10.370951] Calibrating delay using timer specific routine.. 2998.15 BogoMIPS (lpj=5996308)
[ 10.370986] Security Framework v1.0.0 initialized
[ 10.370997] SELinux: Disabled at boot.
[ 10.371014] Mount-cache hash table entries: 512
[ 10.371180] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 10.371196] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 10.371199] CPU: L2 cache: 1024K
[ 10.371202] CPU: After all inits, caps: afe9fbff 00000000 00000000 00002040 00000000 00000000 00000000
[ 10.371213] Compat vDSO mapped to ffffe000.
[ 10.371228] Checking 'hlt' instruction... OK.
[ 10.387049] SMP alternatives: switching to UP code
[ 10.387308] Freeing SMP alternatives: 11k freed
[ 10.387647] Early unpacking initramfs... done
[ 10.816356] ACPI: Core revision 20070126
[ 10.816435] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 10.828079] CPU0: Intel(R) Celeron(R) M processor 1.50GHz stepping 08
[ 10.828111] Total of 1 processors activated (2998.15 BogoMIPS).
[ 10.828873] ENABLING IO-APIC IRQs
[ 10.829196] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 10.974138] Brought up 1 CPUs
[ 10.974313] Booting paravirtualized kernel on bare hardware
[ 10.974411] Time: 20:40:20 Date: 09/11/107
[ 10.974441] NET: Registered protocol family 16
[ 10.974546] EISA bus registered
[ 10.974565] ACPI: bus type pci registered
[ 10.974644] PCI: PCI BIOS revision 2.10 entry at 0xe9b04, last bus=1
[ 10.974647] PCI: Using configuration type 1
[ 10.974649] Setting up standard PCI resources
[ 10.977004] ACPI: EC: Look up EC in DSDT
[ 10.977641] ACPI: EC: GPE=0x01, ports=0x66, 0x62
[ 10.980011] ACPI: Interpreter enabled
[ 10.980016] ACPI: (supports S0 S1 S3 S4 S5)
[ 10.980039] ACPI: Using IOAPIC for interrupt routing
[ 10.990228] ACPI: EC: GPE=0x01, ports=0x66, 0x62
[ 10.990289] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 10.990317] PCI: Probing PCI hardware (bus 00)
[ 10.991041] PCI quirk: region 1000-107f claimed by vt8235 PM
[ 10.991045] PCI quirk: region 1400-140f claimed by vt8235 SMB
[ 10.991402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 11.003575] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[ 11.003676] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15)
[ 11.003773] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[ 11.003869] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15)
[ 11.003958] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 11.004047] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 11.004135] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 11.004224] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 11.004336] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[ 11.004456] ACPI: PCI Interrupt Link [ALKB] (IRQs 23) *11
[ 11.004614] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled.
[ 11.004701] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node c18867e0), AE_TYPE
[ 11.004711] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126]
[ 11.004718] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126]
[ 11.004722] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0
[ 11.004807] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 11.004825] pnp: PnP ACPI init
[ 11.004834] ACPI: bus type pnp registered
[ 11.009264] pnp: PnP ACPI: found 9 devices
[ 11.009267] ACPI: ACPI bus type pnp unregistered
[ 11.009269] PnPBIOS: Disabled
[ 11.009326] PCI: Using ACPI for IRQ routing
[ 11.009331] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 11.011649] NET: Registered protocol family 8
[ 11.011651] NET: Registered protocol family 20
[ 11.011726] pnp: 00:05: iomem range 0xe0000-0xfffff could not be reserved
[ 11.011730] pnp: 00:05: iomem range 0xfff80000-0xffffffff could not be reserved
[ 11.011734] pnp: 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
[ 11.011738] pnp: 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
[ 11.011744] pnp: 00:07: ioport range 0x330-0x331 has been reserved
[ 11.011752] pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 11.011755] pnp: 00:07: ioport range 0x1000-0x107f has been reserved
[ 11.011758] pnp: 00:07: ioport range 0x1400-0x140f has been reserved
[ 11.014041] Time: tsc clocksource has been installed.
[ 11.042038] PCI: Bridge: 0000:00:01.0
[ 11.042042] IO window: c000-dfff
[ 11.042048] MEM window: c0000000-cfffffff
[ 11.042053] PREFETCH window: 90000000-9fffffff
[ 11.042076] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 11.042092] NET: Registered protocol family 2
[ 11.081987] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 11.082091] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 11.084962] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 11.086035] TCP: Hash tables configured (established 131072 bind 65536)
[ 11.086040] TCP reno registered
[ 11.098166] checking if image is initramfs... it is
[ 11.545302] Switched to high resolution mode on CPU 0
[ 11.934287] Freeing initrd memory: 7826k freed
[ 11.934801] audit: initializing netlink socket (disabled)
[ 11.934824] audit(1192135221.116:1): initialized
[ 11.934920] highmem bounce pool size: 64 pages
[ 11.937081] VFS: Disk quotas dquot_6.5.1
[ 11.937147] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 11.937276] io scheduler noop registered
[ 11.937279] io scheduler anticipatory registered
[ 11.937282] io scheduler deadline registered
[ 11.937300] io scheduler cfq registered (default)
[ 11.937322] PCI: VIA PCI bridge detected. Disabling DAC.
[ 11.937378] Boot video device is 0000:01:00.0
[ 11.937562] isapnp: Scanning for PnP cards...
[ 12.292559] isapnp: No Plug & Play device found
[ 12.332123] Real Time Clock Driver v1.12ac
[ 12.332315] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 12.333918] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 12.334204] input: Macintosh mouse button emulation as /class/input/input0
[ 12.334300] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 12.346701] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 12.351637] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 12.351644] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 12.351647] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 12.351650] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 12.351653] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 12.351874] mice: PS/2 mouse device common for all mice
[ 12.352252] EISA: Probing bus 0 at eisa.0
[ 12.352264] Cannot allocate resource for EISA slot 1
[ 12.352297] EISA: Detected 0 cards.
[ 12.352425] TCP cubic registered
[ 12.352449] NET: Registered protocol family 1
[ 12.352483] Using IPI No-Shortcut mode
[ 12.352692] Magic number: 11:106:700
[ 12.353201] Freeing unused kernel memory: 364k freed
[ 12.406958] input: AT Translated Set 2 keyboard as /class/input/input1
[ 12.568628] AppArmor: AppArmor initialized<5>audit(1192135222.116:2): type=1505 info="AppArmor initialized" pid=1166
[ 12.578693] fuse init (API version 7.8)
[ 12.585421] Failure registering capabilities with primary security module.
[ 12.598983] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 12.598990] ACPI: Processor [CPU0] (supports 16 throttling states)
[ 12.607810] ACPI: Thermal Zone [TZ0] (0 C)
[ 12.624895] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 12.643451] md: linear personality registered for level -1
[ 12.648879] md: multipath personality registered for level -4
[ 12.653976] md: raid0 personality registered for level 0
[ 12.659718] md: raid1 personality registered for level 1
[ 12.664730] raid5: automatically using best checksumming function: pIII_sse
[ 12.683645] pIII_sse : 3870.000 MB/sec
[ 12.683648] raid5: using function: pIII_sse (3870.000 MB/sec)
[ 12.751658] raid6: int32x1 500 MB/s
[ 12.819450] raid6: int32x2 594 MB/s
[ 12.887398] raid6: int32x4 441 MB/s
[ 12.955348] raid6: int32x8 401 MB/s
[ 13.023179] raid6: mmxx1 1481 MB/s
[ 13.091070] raid6: mmxx2 1755 MB/s
[ 13.158966] raid6: sse1x1 1081 MB/s
[ 13.226882] raid6: sse1x2 1805 MB/s
[ 13.294788] raid6: sse2x1 1956 MB/s
[ 13.362681] raid6: sse2x2 2199 MB/s
[ 13.362683] raid6: using algorithm sse2x2 (2199 MB/s)
[ 13.362686] md: raid6 personality registered for level 6
[ 13.362689] md: raid5 personality registered for level 5
[ 13.362691] md: raid4 personality registered for level 4
[ 13.392233] md: raid10 personality registered for level 10
[ 13.980526] usbcore: registered new interface driver usbfs
[ 13.980569] usbcore: registered new interface driver hub
[ 13.980596] usbcore: registered new device driver usb
[ 13.981723] USB Universal Host Controller Interface driver v3.0
[ 13.982014] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node c18867e0), AE_TYPE
[ 13.982025] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126]
[ 13.982033] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126]
[ 13.982038] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 13.982046] ACPI: Invalid IRQ link routing entry
[ 13.982048] ACPI: Unable to derive IRQ for device 0000:00:10.0
[ 13.982051] ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI - using IRQ 11
[ 13.982081] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 13.982365] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 13.982404] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200
[ 13.982574] usb usb1: configuration #1 chosen from 1 choice
[ 13.982605] hub 1-0:1.0: USB hub found
[ 13.982614] hub 1-0:1.0: 2 ports detected
[ 14.044601] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 14.044610] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 14.085988] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node c18867e0), AE_TYPE
[ 14.086002] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126]
[ 14.086009] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126]
[ 14.086014] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 14.086022] ACPI: Invalid IRQ link routing entry
[ 14.086024] ACPI: Unable to derive IRQ for device 0000:00:10.1
[ 14.086027] ACPI: PCI Interrupt 0000:00:10.1[b]: no GSI - using IRQ 7
[ 14.086057] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 14.086092] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 14.086130] uhci_hcd 0000:00:10.1: irq 7, io base 0x00001220
[ 14.086241] usb usb2: configuration #1 chosen from 1 choice
[ 14.086271] hub 2-0:1.0: USB hub found
[ 14.086279] hub 2-0:1.0: 2 ports detected
[ 14.164391] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 14.189818] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node c18867e0), AE_TYPE
[ 14.189831] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126]
[ 14.189838] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126]
[ 14.189842] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 14.189851] ACPI: Invalid IRQ link routing entry
[ 14.189853] ACPI: Unable to derive IRQ for device 0000:00:10.2
[ 14.189856] ACPI: PCI Interrupt 0000:00:10.2[C]: no GSI - using IRQ 5
[ 14.189885] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 14.189919] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 14.189958] uhci_hcd 0000:00:10.2: irq 5, io base 0x00001240
[ 14.190082] usb usb3: configuration #1 chosen from 1 choice
[ 14.190112] hub 3-0:1.0: USB hub found
[ 14.190121] hub 3-0:1.0: 2 ports detected
[ 3.876000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.900000] Time: acpi_pm clocksource has been installed.
[ 3.900000] PCI: Enabling device 0000:00:10.3 (0000 -> 0002)
[ 3.900000] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node c18867e0), AE_TYPE
[ 3.900000] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126]
[ 3.900000] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126]
[ 3.900000] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 3.900000] ACPI: Invalid IRQ link routing entry
[ 3.900000] ACPI: Unable to derive IRQ for device 0000:00:10.3
[ 3.900000] ACPI: PCI Interrupt 0000:00:10.3[D]: no GSI - using IRQ 10
[ 3.900000] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 3.900000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 3.900000] ehci_hcd 0000:00:10.3: irq 10, io mem 0x40010000
[ 3.900000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.900000] usb usb4: configuration #1 chosen from 1 choice
[ 3.900000] hub 4-0:1.0: USB hub found
[ 3.900000] hub 4-0:1.0: 6 ports detected
[ 3.932000] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 4.004000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[ 4.004000] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
[ 4.004000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 4.004000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 4.004000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 4.004000] VP_IDE: chipset revision 6
[ 4.004000] VP_IDE: not 100% native mode: will probe irqs later
[ 4.004000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[ 4.004000] ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
[ 4.004000] ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
[ 4.004000] Probing IDE interface ide0...
[ 4.420000] hda: ST9808210A, ATA DISK drive
[ 5.092000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.172000] Probing IDE interface ide1...
[ 5.192000] usb 1-1: new low speed USB device using uhci_hcd and address 3
[ 5.528000] usb 1-1: configuration #1 chosen from 1 choice
[ 5.548000] usbcore: registered new interface driver hiddev
[ 5.584000] input: Logitech USB Receiver as /class/input/input2
[ 5.584000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-1
[ 5.584000] usbcore: registered new interface driver usbhid
[ 5.584000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 6.036000] hdc: MATSHITAUJ-850D, ATAPI CD/DVD-ROM drive
[ 6.372000] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.380000] SCSI subsystem initialized
[ 6.388000] libata version 2.21 loaded.
[ 6.392000] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 11, using IRQ 23
[ 6.392000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 23
[ 6.392000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKB] -> GSI 23 (level, low) -> IRQ 17
[ 6.396000] eth0: VIA Rhine II at 0x1e200, 00:40:d0:94:c6:37, IRQ 17.
[ 6.396000] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[ 6.404000] hda: max request size: 512KiB
[ 6.412000] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
[ 6.416000] hda: cache flushes supported
[ 6.416000] hda: hda1 hda2 < hda5 >
[ 6.548000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 6.548000] Uniform CD-ROM driver Revision: 3.20
[ 6.808000] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 6.808000] EXT3-fs: write access will be enabled during recovery.
[ 28.168000] kjournald starting. Commit interval 5 seconds
[ 28.168000] EXT3-fs: hda1: orphan cleanup on readonly fs
[ 28.168000] ext3_orphan_cleanup: deleting unreferenced inode 2968743
[ 28.168000] ext3_orphan_cleanup: deleting unreferenced inode 4374568
[ 28.168000] EXT3-fs: hda1: 2 orphan inodes deleted
[ 28.168000] EXT3-fs: recovery complete.
[ 28.524000] EXT3-fs: mounted filesystem with ordered data mode.
[ 90.864000] input: PC Speaker as /class/input/input3
[ 91.892000] ath_hal: module license 'Proprietary' taints kernel.
[ 91.892000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 93.084000] wlan: 0.8.4.2 (0.9.3.2)
[ 93.212000] ath_pci: 0.9.4.5 (0.9.3.2)
[ 93.212000] PCI: Enabling device 0000:00:06.0 (0000 -> 0002)
[ 93.212000] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 93.824000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 93.884000] Linux agpgart interface v0.102 (c) Dave Jones
[ 94.092000] ath_rate_sample: 1.2 (0.9.3.2)
[ 94.092000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 94.092000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 94.092000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 94.092000] wifi0: mac 7.8 phy 4.5 radio 5.6
[ 94.092000] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 94.092000] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 94.092000] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 94.092000] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 94.092000] wifi0: Use hw queue 8 for CAB traffic
[ 94.092000] wifi0: Use hw queue 9 for beacons
[ 94.224000] irda_init()
[ 94.224000] NET: Registered protocol family 23
[ 94.944000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b3, caps: 0xa04713/0x200000
[ 94.992000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 95.480000] wifi0: Atheros 5212: mem=0x40000000, irq=18
[ 95.480000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 95.480000] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
[ 95.484000] agpgart: AGP aperture is 32M @ 0xa0000000
[ 96.660000] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
[ 96.660000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 5, using IRQ 22
[ 96.660000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 96.660000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 96.660000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 97.860000] lp: driver loaded but no devices found
[ 97.988000] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[ 98.816000] EXT3 FS on hda1, internal journal
[ 100.968000] ACPI: Battery Slot [BAT0] (battery absent)
[ 101.388000] ACPI: AC Adapter [AC] (on-line)
[ 101.444000] No dock devices found.
[ 101.540000] input: Power Button (FF) as /class/input/input5
[ 101.544000] ACPI: Power Button (FF) [PWRF]
[ 101.596000] input: Lid Switch as /class/input/input6
[ 101.596000] ACPI: Lid Switch [LID]
[ 101.624000] input: Sleep Button (CM) as /class/input/input7
[ 101.624000] ACPI: Sleep Button (CM) [SBTN]
[ 101.780000] ACPI: Video Device [VGA0] (multi-head: yes rom: no post: no)
[ 104.952000] eth0: link down
[ 106.852000] ppdev: user-space parallel port driver
[ 110.516000] audit(1192135330.717:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4928 profile="/usr/sbin/cupsd"
[ 111.244000] apm: BIOS not found.
[ 113.492000] [drm] Initialized drm 1.1.0 20060810
[ 114.212000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 114.212000] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 114.652000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 114.652000] agpgart: Device is in legacy mode, falling back to 2.x
[ 114.652000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode
[ 114.652000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode
[ 116.740000] NET: Registered protocol family 10
[ 116.740000] lo: Disabled Privacy Extensions
[ 116.740000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 126.296000] Failure registering capabilities with primary security module.
[ 127.564000] ath0: no IPv6 routers present
[ 128.984000] Bluetooth: Core ver 2.11
[ 128.984000] NET: Registered protocol family 31
[ 128.984000] Bluetooth: HCI device and connection manager initialized
[ 128.984000] Bluetooth: HCI socket layer initialized
[ 129.316000] Bluetooth: L2CAP ver 2.8
[ 129.316000] Bluetooth: L2CAP socket layer initialized
[ 129.792000] Bluetooth: RFCOMM socket layer initialized
[ 129.792000] Bluetooth: RFCOMM TTY layer initialized
[ 129.792000] Bluetooth: RFCOMM ver 1.8
[ 362.596000] hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request.
[ 364.004000] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
[ 364.088000] NET: Registered protocol family 17
[ 364.560000] hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request.
[ 374.416000] ath0: no IPv6 routers present
[ 386.824000] hda: dma_timer_expiry: dma status == 0x24
[ 396.824000] hda: DMA interrupt recovery
[ 396.824000] hda: lost interrupt
[ 405.000000] NETDEV WATCHDOG: wifi0: transmit timed out
[ 420.412000] hda: dma_timer_expiry: dma status == 0x24
[ 430.412000] hda: DMA interrupt recovery
[ 430.412000] hda: lost interrupt
[ 460.548000] ADDRCONF(NETDEV_UP): ath0: link is not ready
[ 469.848000] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
[ 486.272000] ath0: no IPv6 routers present
frederic@PC-portable-PB:~$Hors ligne
#2 Le 12/10/2007, à 09:11
- coubi64
Re : Update Feisty -> Gutsy : quelques "soucis"
Il y a un rapport de bugs sur la lenteur au démarrage:
Hors ligne
#3 Le 12/10/2007, à 15:24
- coubi64
Re : Update Feisty -> Gutsy : quelques "soucis"
Un rapport de bug a également été ouvert pour une ligne d'erreur présente dans mon 'dmesg':
Hors ligne
#4 Le 13/10/2007, à 06:12
- coubi64
Re : Update Feisty -> Gutsy : quelques "soucis"
Pour info, j'ai arrangé mon pb de gouverneurs grâce à ce post (j'avais suivi la doc de ce wiki mais au démarrage le gouverneur se remettait sur 'Ondemand' malgré un paramétrage sur 'Performance'
http://ubuntuforums.org/showpost.php?p= … stcount=87
Une autre question par contre: pour faire la migration de Feisty vers Gusty, j'ai changé mon sources.list, un update puis un dist-upgrade. Mais je viens de remarqué que je n'ai par exemple pas les nouveaux répertoires dans Raccourcis (Musique, etc....), ni le menu des effets de bureaux, etc....
Comment cela se fait-il?
Hors ligne
#5 Le 13/10/2007, à 07:24
- malbo
Re : Update Feisty -> Gutsy : quelques "soucis"
Vu qu'il n'y a personne pour t'aider, moi je te conseille une install toute neuve. C'est ce que je pratique et au moins je pars sur de bonnes bases. le liveCD de la release candidate marche très bien : j'ai fait ma réinstall hier (gravure de l'image ubuntu-7.10-rc-desktop-i386.iso)
Hors ligne
#6 Le 13/10/2007, à 09:02
- Elvith Gent
Re : Update Feisty -> Gutsy : quelques "soucis"
Préférez le torrent pour ne pas surcharger le serveur ! 
Moi je télécharge le torrent, je charge l'ISO à partir de ce même torrent, je le grave et je fais aussi une réinstall neuve. C'est l'avantage d'un /home séparé : tu conserves tes données d'une réinstall sur l'autre.
Et puis avec tous les logiciels installés par défaut dans ubuntu, à moins que tu fasses une utilisation très spécifique de ton PC, tu n'as pas dû installer grand-chose (moi, c'est le cas). Donc quand je "repars à zéro", ça ne me prend pas plus d'une heure pour retrouver mon ancienne config (codecs, java, logiciels non préinstallés ...).
Après moi je parle mais ça fait que depuis juillet 2007 que je l'ai, ubuntu, donc mon avis ne vaut peut-être pas grand-chose ^^
Dernière modification par Elvith Gent (Le 13/10/2007, à 09:03)
Linux Counter user #458259
Mon site de jeu de rôles : http://www.niil.fr
Hors ligne
#7 Le 13/10/2007, à 11:19
- malbo
Re : Update Feisty -> Gutsy : quelques "soucis"
C'est marrant, il n' y a encore aucun contributeur qui est venu nous expliquer que c'est idiot de réinstaller à chaque fois. Ils sont tous au lit ou quoi ?
Hors ligne
#8 Le 13/10/2007, à 11:59
- coubi64
Re : Update Feisty -> Gutsy : quelques "soucis"
Merci à ceux qui m'ont répondu.
Pour l'instant je continue mes recherches avant de passer à une réinstall compléte (au cas où des maj arrangeraient mes pbs, etc...)
Ce que je peux dire, c'est que la lenteur vient du noyau car quand je reboot en 2.6.20 tout va aussi bien qu'avant.
J'ai des paramétres spécifiques dans mon grub pour mon PC (cf ma signature, le post sur mon PC portable), peut être y sont ils pour quelque chose avec ce noyau 2.6.22
Si vous avez des idées, je suis preneur 
Hors ligne
#9 Le 14/10/2007, à 17:20
- sogy
Re : Update Feisty -> Gutsy : quelques "soucis"
Salut,
Mon aussi ,c'est pareil.
Si je laisse l'option IRQPOLL, c'est tres lent à demarrer.
Si je l'enleve, ça bombe mais je n'ai plus d'USB.
Je n'avais pas ce pb en 7.04
Hors ligne
#10 Le 15/10/2007, à 13:06
- coubi64
Re : Update Feisty -> Gutsy : quelques "soucis"
Est ce qu'un rapport de bug a déjà été lancé? Car je n'ai rien trouvé sur Launchpad.
Toujours le pb aujourd'hui (lenteur + aucune ligne ne défile au démarrage du système) malgré les maj du noyau. Voilà mon dmesg:
frederic@PC-portable-PB:~$ dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003bfef000 (usable)
[ 0.000000] BIOS-e820: 000000003bff0000 - 000000003bffffc0 (ACPI data)
[ 0.000000] BIOS-e820: 000000003bffffc0 - 000000003c000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 63MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 245743) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 245743
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 245743
[ 0.000000] On node 0 totalpages: 245743
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 127 pages used for memmap
[ 0.000000] HighMem zone: 16240 pages, LIFO batch:3
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00E6010 checksum 0
[ 0.000000] ACPI: RSDP 000E6010, 0014 (r0 OID_00)
[ 0.000000] ACPI: RSDT 3BFFC2D0, 002C (r1 INSYDE FACP_000 100 0000 10200)
[ 0.000000] ACPI: FACP 3BFFFB00, 0074 (r1 INSYDE FACP_000 100 0000 10200)
[ 0.000000] ACPI: DSDT 3BFFC310, 37E2 (r1 INSYDE PN800 1000 INTL 2002036)
[ 0.000000] ACPI: FACS 3BFFFFC0, 0040
[ 0.000000] ACPI: APIC 3BFFFB90, 0068 (r1 INSYDE APIC_000 30303030 0000 10200)
[ 0.000000] ACPI: BIOS age (400) fails cutoff (2000), acpi=force is required to enable ACPI
[ 0.000000] ACPI: acpi=force override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3c000000:c3f80000)
[ 0.000000] Built 1 zonelists. Total pages: 243824
[ 0.000000] Kernel command line: root=UUID=867d3dcb-4304-4f1c-96ee-96caa2245107 ro vga=791 pnpbios=off pci=biosirq acpi=force irqpoll quiet locale=fr_FR elevator=cfq
[ 0.000000] Misrouted IRQ fixup and polling support enabled
[ 0.000000] This may significantly impact system performance
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1492.716 MHz processor.
[ 10.380216] Console: colour dummy device 80x25
[ 10.380752] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 10.381352] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 10.420638] Memory: 962180k/982972k available (2015k kernel code, 20180k reserved, 916k data, 364k init, 65468k highmem)
[ 10.420650] virtual kernel memory layout:
[ 10.420651] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 10.420652] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 10.420654] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 10.420655] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 10.420657] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 10.420658] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 10.420660] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 10.420664] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 10.420712] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 10.500654] Calibrating delay using timer specific routine.. 2998.15 BogoMIPS (lpj=5996303)
[ 10.500689] Security Framework v1.0.0 initialized
[ 10.500701] SELinux: Disabled at boot.
[ 10.500718] Mount-cache hash table entries: 512
[ 10.500883] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 10.500899] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 10.500902] CPU: L2 cache: 1024K
[ 10.500906] CPU: After all inits, caps: afe9fbff 00000000 00000000 00002040 00000000 00000000 00000000
[ 10.500916] Compat vDSO mapped to ffffe000.
[ 10.500931] Checking 'hlt' instruction... OK.
[ 10.516754] SMP alternatives: switching to UP code
[ 10.517010] Freeing SMP alternatives: 11k freed
[ 10.517346] Early unpacking initramfs... done
[ 10.946214] ACPI: Core revision 20070126
[ 10.946294] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 10.981995] CPU0: Intel(R) Celeron(R) M processor 1.50GHz stepping 08
[ 10.982027] Total of 1 processors activated (2998.15 BogoMIPS).
[ 10.982789] ENABLING IO-APIC IRQs
[ 10.983112] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 11.127808] Brought up 1 CPUs
[ 11.127983] Booting paravirtualized kernel on bare hardware
[ 11.128080] Time: 10:47:30 Date: 09/15/107
[ 11.128112] NET: Registered protocol family 16
[ 11.128216] EISA bus registered
[ 11.128235] ACPI: bus type pci registered
[ 11.128315] PCI: PCI BIOS revision 2.10 entry at 0xe9b04, last bus=1
[ 11.128318] PCI: Using configuration type 1
[ 11.128320] Setting up standard PCI resources
[ 11.130674] ACPI: EC: Look up EC in DSDT
[ 11.131309] ACPI: EC: GPE=0x01, ports=0x66, 0x62
[ 11.133682] ACPI: Interpreter enabled
[ 11.133686] ACPI: (supports S0 S1 S3 S4 S5)
[ 11.133709] ACPI: Using IOAPIC for interrupt routing
[ 11.144078] ACPI: EC: GPE=0x01, ports=0x66, 0x62
[ 11.144141] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 11.144168] PCI: Probing PCI hardware (bus 00)
[ 11.144891] PCI quirk: region 1000-107f claimed by vt8235 PM
[ 11.144896] PCI quirk: region 1400-140f claimed by vt8235 SMB
[ 11.145253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 11.157456] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[ 11.157557] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15)
[ 11.157654] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[ 11.157750] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15)
[ 11.157838] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 11.157927] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 11.158015] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 11.158104] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 11.158216] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[ 11.158336] ACPI: PCI Interrupt Link [ALKB] (IRQs 23) *11
[ 11.158495] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled.
[ 11.158582] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node c18867e0), AE_TYPE
[ 11.158592] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126]
[ 11.158599] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126]
[ 11.158603] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0
[ 11.158685] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 11.158703] pnp: PnP ACPI init
[ 11.158712] ACPI: bus type pnp registered
[ 11.163149] pnp: PnP ACPI: found 9 devices
[ 11.163152] ACPI: ACPI bus type pnp unregistered
[ 11.163155] PnPBIOS: Disabled
[ 11.163211] PCI: Using ACPI for IRQ routing
[ 11.163215] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 11.165531] NET: Registered protocol family 8
[ 11.165533] NET: Registered protocol family 20
[ 11.165612] pnp: 00:05: iomem range 0xe0000-0xfffff could not be reserved
[ 11.165616] pnp: 00:05: iomem range 0xfff80000-0xffffffff could not be reserved
[ 11.165620] pnp: 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
[ 11.165623] pnp: 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
[ 11.165630] pnp: 00:07: ioport range 0x330-0x331 has been reserved
[ 11.165639] pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 11.165642] pnp: 00:07: ioport range 0x1000-0x107f has been reserved
[ 11.165645] pnp: 00:07: ioport range 0x1400-0x140f has been reserved
[ 11.167710] Time: tsc clocksource has been installed.
[ 11.195927] PCI: Bridge: 0000:00:01.0
[ 11.195930] IO window: c000-dfff
[ 11.195936] MEM window: c0000000-cfffffff
[ 11.195941] PREFETCH window: 90000000-9fffffff
[ 11.195966] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 11.195982] NET: Registered protocol family 2
[ 11.235655] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 11.235767] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 11.238653] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 11.239728] TCP: Hash tables configured (established 131072 bind 65536)
[ 11.239733] TCP reno registered
[ 11.251840] checking if image is initramfs... it is
[ 11.698971] Switched to high resolution mode on CPU 0
[ 12.087142] Freeing initrd memory: 7826k freed
[ 12.087656] audit: initializing netlink socket (disabled)
[ 12.087677] audit(1192445250.116:1): initialized
[ 12.087773] highmem bounce pool size: 64 pages
[ 12.089907] VFS: Disk quotas dquot_6.5.1
[ 12.089973] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 12.090103] io scheduler noop registered
[ 12.090106] io scheduler anticipatory registered
[ 12.090108] io scheduler deadline registered
[ 12.090128] io scheduler cfq registered (default)
[ 12.090150] PCI: VIA PCI bridge detected. Disabling DAC.
[ 12.090207] Boot video device is 0000:01:00.0
[ 12.090417] isapnp: Scanning for PnP cards...
[ 12.445414] isapnp: No Plug & Play device found
[ 12.484792] Real Time Clock Driver v1.12ac
[ 12.484926] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 12.486592] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 12.486874] input: Macintosh mouse button emulation as /class/input/input0
[ 12.486967] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 12.497642] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 12.502633] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 12.502640] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 12.502643] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 12.502646] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 12.502649] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 12.502866] mice: PS/2 mouse device common for all mice
[ 12.503591] EISA: Probing bus 0 at eisa.0
[ 12.503602] Cannot allocate resource for EISA slot 1
[ 12.503635] EISA: Detected 0 cards.
[ 12.503768] TCP cubic registered
[ 12.503792] NET: Registered protocol family 1
[ 12.503826] Using IPI No-Shortcut mode
[ 12.504036] Magic number: 11:446:780
[ 12.504222] hash matches device ptyq2
[ 12.504541] Freeing unused kernel memory: 364k freed
[ 12.558151] input: AT Translated Set 2 keyboard as /class/input/input1
[ 12.719913] AppArmor: AppArmor initialized<5>audit(1192445251.116:2): type=1505 info="AppArmor initialized" pid=1166
[ 12.729990] fuse init (API version 7.8)
[ 12.736694] Failure registering capabilities with primary security module.
[ 12.756496] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 12.756504] ACPI: Processor [CPU0] (supports 16 throttling states)
[ 12.763968] ACPI: Thermal Zone [TZ0] (0 C)
[ 12.781012] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 12.799726] md: linear personality registered for level -1
[ 12.805112] md: multipath personality registered for level -4
[ 12.810265] md: raid0 personality registered for level 0
[ 12.815960] md: raid1 personality registered for level 1
[ 12.820969] raid5: automatically using best checksumming function: pIII_sse
[ 12.837175] pIII_sse : 3884.000 MB/sec
[ 12.837178] raid5: using function: pIII_sse (3884.000 MB/sec)
[ 12.905085] raid6: int32x1 500 MB/s
[ 12.972971] raid6: int32x2 594 MB/s
[ 13.040909] raid6: int32x4 441 MB/s
[ 13.108882] raid6: int32x8 401 MB/s
[ 13.176687] raid6: mmxx1 1481 MB/s
[ 13.244571] raid6: mmxx2 1755 MB/s
[ 13.312507] raid6: sse1x1 1081 MB/s
[ 13.380375] raid6: sse1x2 1805 MB/s
[ 13.448253] raid6: sse2x1 1955 MB/s
[ 13.516161] raid6: sse2x2 2199 MB/s
[ 13.516164] raid6: using algorithm sse2x2 (2199 MB/s)
[ 13.516167] md: raid6 personality registered for level 6
[ 13.516169] md: raid5 personality registered for level 5
[ 13.516172] md: raid4 personality registered for level 4
[ 13.545757] md: raid10 personality registered for level 10
[ 14.162037] usbcore: registered new interface driver usbfs
[ 14.162081] usbcore: registered new interface driver hub
[ 14.162109] usbcore: registered new device driver usb
[ 14.163280] USB Universal Host Controller Interface driver v3.0
[ 14.163530] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node c18867e0), AE_TYPE
[ 14.163541] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126]
[ 14.163548] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126]
[ 14.163553] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 14.163561] ACPI: Invalid IRQ link routing entry
[ 14.163564] ACPI: Unable to derive IRQ for device 0000:00:10.0
[ 14.163566] ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI - using IRQ 11
[ 14.163596] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 14.163876] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 14.163914] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200
[ 14.164087] usb usb1: configuration #1 chosen from 1 choice
[ 14.164120] hub 1-0:1.0: USB hub found
[ 14.164128] hub 1-0:1.0: 2 ports detected
[ 14.198250] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 14.198258] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 14.230499] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 14.267359] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node c18867e0), AE_TYPE
[ 14.267372] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126]
[ 14.267379] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126]
[ 14.267384] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 14.267392] ACPI: Invalid IRQ link routing entry
[ 14.267394] ACPI: Unable to derive IRQ for device 0000:00:10.1
[ 14.267397] ACPI: PCI Interrupt 0000:00:10.1[b]: no GSI - using IRQ 7
[ 14.267427] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 14.267467] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 14.267505] uhci_hcd 0000:00:10.1: irq 7, io base 0x00001220
[ 14.267622] usb usb2: configuration #1 chosen from 1 choice
[ 14.267653] hub 2-0:1.0: USB hub found
[ 14.267661] hub 2-0:1.0: 2 ports detected
[ 14.371188] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node c18867e0), AE_TYPE
[ 14.371202] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126]
[ 14.371209] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126]
[ 14.371214] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 14.371222] ACPI: Invalid IRQ link routing entry
[ 14.371224] ACPI: Unable to derive IRQ for device 0000:00:10.2
[ 14.371227] ACPI: PCI Interrupt 0000:00:10.2[C]: no GSI - using IRQ 5
[ 14.371258] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 14.371293] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 14.371331] uhci_hcd 0000:00:10.2: irq 5, io base 0x00001240
[ 14.371457] usb usb3: configuration #1 chosen from 1 choice
[ 14.371488] hub 3-0:1.0: USB hub found
[ 14.371496] hub 3-0:1.0: 2 ports detected
[ 3.852000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.856000] Time: acpi_pm clocksource has been installed.
[ 3.928000] PCI: Enabling device 0000:00:10.3 (0000 -> 0002)
[ 3.928000] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node c18867e0), AE_TYPE
[ 3.928000] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126]
[ 3.928000] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126]
[ 3.928000] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 3.928000] ACPI: Invalid IRQ link routing entry
[ 3.928000] ACPI: Unable to derive IRQ for device 0000:00:10.3
[ 3.928000] ACPI: PCI Interrupt 0000:00:10.3[D]: no GSI - using IRQ 10
[ 3.928000] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 3.928000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 3.928000] ehci_hcd 0000:00:10.3: irq 10, io mem 0x40010000
[ 3.960000] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 3.960000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.960000] usb usb4: configuration #1 chosen from 1 choice
[ 3.960000] hub 4-0:1.0: USB hub found
[ 3.960000] hub 4-0:1.0: 6 ports detected
[ 4.064000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[ 4.064000] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
[ 4.064000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 4.064000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 4.064000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 4.064000] VP_IDE: chipset revision 6
[ 4.064000] VP_IDE: not 100% native mode: will probe irqs later
[ 4.064000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[ 4.064000] ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
[ 4.064000] ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
[ 4.064000] Probing IDE interface ide0...
[ 4.480000] hda: ST9808210A, ATA DISK drive
[ 5.152000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.220000] usb 1-1: new low speed USB device using uhci_hcd and address 3
[ 5.228000] Probing IDE interface ide1...
[ 5.536000] usb 1-1: configuration #1 chosen from 1 choice
[ 5.552000] usbcore: registered new interface driver hiddev
[ 5.592000] input: Logitech USB Receiver as /class/input/input2
[ 5.592000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-1
[ 5.592000] usbcore: registered new interface driver usbhid
[ 5.592000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 6.096000] hdc: MATSHITAUJ-850D, ATAPI CD/DVD-ROM drive
[ 6.432000] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.440000] SCSI subsystem initialized
[ 6.448000] libata version 2.21 loaded.
[ 6.452000] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 11, using IRQ 23
[ 6.452000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 23
[ 6.452000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKB] -> GSI 23 (level, low) -> IRQ 17
[ 6.456000] eth0: VIA Rhine II at 0x1e200, 00:40:d0:94:c6:37, IRQ 17.
[ 6.456000] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[ 6.464000] hda: max request size: 512KiB
[ 6.472000] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
[ 6.476000] hda: cache flushes supported
[ 6.476000] hda: hda1 hda2 < hda5 >
[ 6.596000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 6.596000] Uniform CD-ROM driver Revision: 3.20
[ 6.888000] kjournald starting. Commit interval 5 seconds
[ 6.888000] EXT3-fs: mounted filesystem with ordered data mode.
[ 39.244000] input: PC Speaker as /class/input/input3
[ 42.028000] wlan: 0.8.4.2 (0.9.3.2)
[ 42.196000] ath_pci: Unknown symbol _ath_hal_attach
[ 42.196000] ath_pci: Unknown symbol ath_hal_process_noisefloor
[ 42.200000] ath_pci: Unknown symbol ath_hal_computetxtime
[ 42.200000] ath_pci: Unknown symbol ath_hal_mhz2ieee
[ 42.200000] ath_pci: Unknown symbol ath_hal_detach
[ 42.200000] ath_pci: Unknown symbol ath_hal_probe
[ 42.200000] ath_pci: Unknown symbol ath_hal_init_channels
[ 42.200000] ath_pci: Unknown symbol ath_hal_getwirelessmodes
[ 42.700000] Linux agpgart interface v0.102 (c) Dave Jones
[ 42.708000] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
[ 42.708000] agpgart: AGP aperture is 32M @ 0xa0000000
[ 42.812000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 42.816000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 43.028000] irda_init()
[ 43.028000] NET: Registered protocol family 23
[ 43.576000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b3, caps: 0xa04713/0x200000
[ 43.624000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 45.076000] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
[ 45.076000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 5, using IRQ 22
[ 45.076000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 45.076000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 18
[ 45.076000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 48.884000] lp: driver loaded but no devices found
[ 49.140000] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[ 50.604000] EXT3 FS on hda1, internal journal
[ 56.080000] ACPI: Battery Slot [BAT0] (battery absent)
[ 56.692000] ACPI: AC Adapter [AC] (on-line)
[ 56.748000] No dock devices found.
[ 56.844000] input: Power Button (FF) as /class/input/input5
[ 56.848000] ACPI: Power Button (FF) [PWRF]
[ 56.896000] input: Lid Switch as /class/input/input6
[ 56.896000] ACPI: Lid Switch [LID]
[ 56.920000] input: Sleep Button (CM) as /class/input/input7
[ 56.920000] ACPI: Sleep Button (CM) [SBTN]
[ 57.084000] ACPI: Video Device [VGA0] (multi-head: yes rom: no post: no)
[ 61.604000] eth0: link down
[ 64.712000] ppdev: user-space parallel port driver
[ 71.896000] audit(1192445322.092:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4898 profile="/usr/sbin/cupsd"
[ 72.572000] apm: BIOS not found.
[ 75.432000] [drm] Initialized drm 1.1.0 20060810
[ 76.096000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
[ 76.096000] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 76.472000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 76.472000] agpgart: Device is in legacy mode, falling back to 2.x
[ 76.472000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode
[ 76.472000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode
[ 78.288000] NET: Registered protocol family 10
[ 78.288000] lo: Disabled Privacy Extensions
[ 78.288000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 90.088000] Failure registering capabilities with primary security module.
[ 91.692000] Bluetooth: Core ver 2.11
[ 91.696000] NET: Registered protocol family 31
[ 91.696000] Bluetooth: HCI device and connection manager initialized
[ 91.696000] Bluetooth: HCI socket layer initialized
[ 91.828000] Bluetooth: L2CAP ver 2.8
[ 91.828000] Bluetooth: L2CAP socket layer initialized
[ 92.500000] Bluetooth: RFCOMM socket layer initialized
[ 92.500000] Bluetooth: RFCOMM TTY layer initialized
[ 92.500000] Bluetooth: RFCOMM ver 1.8
frederic@PC-portable-PB:~$Hors ligne
#11 Le 15/10/2007, à 13:26
- coubi64
Re : Update Feisty -> Gutsy : quelques "soucis"
J'ai aussi ce bug:
Hors ligne
#12 Le 15/10/2007, à 18:07
- Jonon
Re : Update Feisty -> Gutsy : quelques "soucis"
Techniquement, la méthode officielle pour upgrader,
Alt + F2 puis,
update-manager -d
Plus d'infos sur l'upgrade ici, en anglais.
Sachant qu'uns fois gutsy dispo, le système proposera d'installer la "nouvelle version disponible". (voir lien plus haut: "Network upgrade for Ubuntu desktops (recommended)")
Dernière modification par Jonon (Le 15/10/2007, à 18:08)
hype_ @ freenode|hyp3 @ twitter | Ceci n'est pas un Blag
Hors ligne
#13 Le 15/10/2007, à 18:31
- Respawner
Re : Update Feisty -> Gutsy : quelques "soucis"
3) Je n'ai plus les lignes qui défilent au démarrage indiquant les diverses étapes. J'ai juste un écran noir jusqu'au bureau de login. Comment rétablir ça?
Idem sur mon portable (LG P1 Express Dual)
Installation toute fraîche de la RC samedi soir ...
Hors ligne
#14 Le 17/10/2007, à 09:30
- coubi64
Re : Update Feisty -> Gutsy : quelques "soucis"
Pour ceux qui ont le même souci que moi, pouvez-vous mettre votre ligne de démarrage grub?
Moi j'ai ceci:
# defoptions=vga=791 pnpbios=off pci=biosirq acpi=force irqpoll quiet locale=fr_FR elevator=cfqHors ligne
#15 Le 17/10/2007, à 14:26
- sogy
Re : Update Feisty -> Gutsy : quelques "soucis"
maintenant j'ai résolu le problème de démarrage trés lent.
Supprimer l'option IRQPOLL dans le menu grub.
Ou je met ça : # acpi=force ro quiet locale=fr_FR
Le portable démarre parfaitement, réseau ok, WIFI ok mais pas d'USB
Ou je met ça : # acpi=force pci=noacpi noapic ro quiet locale=fr_FR
Le portable démarre parfaitement, réseau ok, USB ok mais pas de wifi
Pour l'instant j'ai duppliqué les lignes dans le menu grub afin de pouvoir choisir
dans quelle config je veux démarrer.
J'ai trouvé cette solution dans :
http://bugzilla.kernel.org/show_bug.cgi?id=8896
Hors ligne
#16 Le 17/10/2007, à 14:33
- coubi64
Re : Update Feisty -> Gutsy : quelques "soucis"
Merci pour le lien, mais bon par contre toujours pas de solution pour que tout fonctionne.... je n'ai pas envie de choisir entre l'usb et le Wifi.... 
Hors ligne
#17 Le 17/10/2007, à 15:46
- sogy
Re : Update Feisty -> Gutsy : quelques "soucis"
Entierement d'accord.
J'espère bien que c'est provisoire, en attendant de trouver une solution définitive.
Hors ligne
#18 Le 17/10/2007, à 19:41
- Respawner
Re : Update Feisty -> Gutsy : quelques "soucis"
Pour le soucis de la barre de chargement j'ai réussis à résoudre.
sudo vim /etc/usplash.confJe suis passé en 1024 x 768 à la place de 1280 x 1024
Puis
sudo update-initramfs -uEdit : syntaxe + orthographe 
Dernière modification par Respawner (Le 17/10/2007, à 20:43)
Hors ligne
#19 Le 17/10/2007, à 20:58
- sogy
Re : Update Feisty -> Gutsy : quelques "soucis"
Encore un petit mieux !
avec # acpi=force pci=noacpi noapic ro quiet locale=fr_FR , j'ai tout sauf le wifi interne (atheros)
Mais si je met un stick USB wifi (D-link) le wifi est parfaitement reconnu.
J'en avais bavé pour configurer mon Easynote R1800 sous la 7.04
On recommence pour la 7.10 !!!
Hors ligne
#20 Le 17/10/2007, à 21:43
- coubi64
Re : Update Feisty -> Gutsy : quelques "soucis"
J'ai un easynot R1994, je crois qu'on n'est pas gâté avec ces PC 
Hors ligne
#21 Le 18/10/2007, à 10:36
- coubi64
Re : Update Feisty -> Gutsy : quelques "soucis"
Le pb de l'écran noir au démarrage n'est pas résolu pour moi malgré la manip indiquée ici:
https://bugs.launchpad.net/ubuntu/gutsy … omments/11
Je crois que la finale de Gutsy ne sera tip top pour mon PC....:(
Hors ligne
#22 Le 18/10/2007, à 11:49
- sogy
Re : Update Feisty -> Gutsy : quelques "soucis"
L'écran noir ce n'est pas qu'un problème de résolution, mais de nombre de couleur.
1024*768 en 24bit ou 32bit c'est trop fort.
http://doc.ubuntu-fr.org/usplash
http://ubuntu.blog-rock.info/?5-changer-l-ecran-de-demarrage-d-ubuntu-sous-feisty
Hors ligne
#23 Le 18/10/2007, à 11:57
- coubi64
Re : Update Feisty -> Gutsy : quelques "soucis"
c'est pour ça qu'il faut mettre vga=791 je pense (1024x768 en 16 bits).
Mais ça ne marche toujours pas pour moi
Hors ligne
#24 Le 18/10/2007, à 13:11
- sogy
Re : Update Feisty -> Gutsy : quelques "soucis"
Histoire de tester j'ai suivi cette procédure , et ça marche nickel en 7.10 http://ubuntu.blog-rock.info/?5-changer-l-ecran-de-demarrage-d-ubuntu-sous-feisty
pour résumer :
installation de USPLASH-SWITCHER http://www.getdeb.net/app.php?name=usplash-switcher
Télécharger : http://www.gnome-look.org/content/show.php/Usplash+BlackChrome?content=60249
Ensuite copiez le dans le répertoire "/usr/lib/usplash/" avec la commande suivante
(dans un terminal)
sudo cp /le_chemin_vers_votre_fichier/chrome-theme.so /usr/lib/usplash/chrome-theme.so
Une fois que cela est fait il faut l'installer en indiquant au systeme qu'il existe un nouveau Usplash (dans un terminal)
sudo update-alternatives --install /usr/lib/usplash/usplash-artwork.so usplash-artwork.so /usr/lib/usplash/chrome-theme.so 10
Lancer USPLASH-SWITCHER, selectionner , GO
Hors ligne
#25 Le 18/10/2007, à 20:59
- cloc
Re : Update Feisty -> Gutsy : quelques "soucis"
s'cusez. Je suis pas très doué
au debut de la maj, on me donne ce message d'erreur :
Getting upgrade prerequisites failed
The system was unable to get the prerequisites for the upgrade. The upgrade will abort now and restore the original system state.
Please report this as a bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bugreport.
Sa veut dire quoi???
Hors ligne