Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".
Test de l'ISO d'Ubuntu francophone : nous avons besoin de testeurs pour la version francophone d'Ubuntu 14.04. Liens et informations ici.

#1 Le 10/04/2014, à 19:52

Yog Sothoth

Machine qui freeze souvent (Xubuntu 13.10)

Bonjour,

J'ai un 4770K sur une CM gigabyte Z87DS3H. Ils ont trois mois et pas de taches de crasses. La GTX560 a un an et demi, le disque dur 29 000 heures et smartctl le dit "passed". L'alim est une corsair TX650 de 4 ans et demi. Ma ram corsair a été testé au memtest. Une passe. J'ai une carte WIFI PCI un peu capricieuse au bout de six mois.

J'ai testé avec une autre carte graphique GT9800, même topo.

Je fais tourner pas mal de trucs sur ma machine overclockée à 4100 Mhz et 1,2V. Bien passe en principe. Cela n'a pas posé de problèmes avant. Mes températures tournent autour de 64 °C avec un noctua.NHU12P. Avec le rad intel, sans OC elles étaient de 99°C.

J'ai un log de X quelquepart pour ceux que ça intéresse.




X.Org X Server 1.14.5 
Release Date: 2013-12-12 
[    13.539] X Protocol Version 11, Revision 0 
[    13.539] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu 
[    13.539] Current Operating System: Linux orthanc 3.11.0-18-generic #32-Ubuntu SMP Tue Feb 18 21:11:14 UTC 2014 x86_64 
[    13.539] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-18-generic root=UUID=b11b3df9-f382-4717-8594-9b8afe20983b ro quiet splash 
[    13.539] Build Date: 17 December 2013  10:06:15AM 
[    13.539] xorg-server 2:1.14.5-1ubuntu2~saucy1 (For technical support please see http://www.ubuntu.com/support)  
[    13.539] Current version of pixman: 0.30.2 
[    13.539]  Before reporting problems, check http://wiki.x.org 
 to make sure that you have the latest version. 
[    13.539] Markers: (--) probed, (**) from config file, (==) default setting, 
 (++) from command line, (!!) notice, (II) informational, 
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown. 
[    13.539] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 31 12:48:32 2014 
[    13.568] (==) Using system config directory "/usr/share/X11/xorg.conf.d" 
[    13.568] (==) No Layout section.  Using the first Screen section. 
[    13.568] (==) No screen section available. Using defaults. 
[    13.568] (**) |-->Screen "Default Screen Section" (0) 
[    13.568] (**) |   |-->Monitor "<default monitor>" 
[    13.568] (==) No monitor specified for screen "Default Screen Section". 
 Using a default monitor configuration. 
[    13.568] (==) Automatically adding devices 
[    13.568] (==) Automatically enabling devices 
[    13.568] (==) Automatically adding GPU devices 
[    13.568] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. 
[    13.568]  Entry deleted from font path. 
[    13.568] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. 
[    13.568]  Entry deleted from font path. 
[    13.568] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. 
[    13.568]  Entry deleted from font path. 
[    13.568] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. 
[    13.568]  Entry deleted from font path. 
[    13.568] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. 
[    13.568]  Entry deleted from font path. 
[    13.569] (==) FontPath set to: 
 /usr/share/fonts/X11/misc, 
 /usr/share/fonts/X11/Type1, 
 built-ins 
[    13.569] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" 
[    13.569] (II) The server relies on udev to provide the list of input devices. 
 If no devices become available, reconfigure udev or disable AutoAddDevices. 
[    13.569] (II) Loader magic: 0x7f856b7fcd20 
[    13.569] (II) Module ABI versions: 
[    13.569]  X.Org ANSI C Emulation: 0.4 
[    13.569]  X.Org Video Driver: 14.1 
[    13.569]  X.Org XInput driver : 19.1 
[    13.569]  X.Org Server Extension : 7.0 
[    13.569] (--) PCI:*(0:1:0:0) 10de:1201:10b0:0801 rev 161, Mem @ 0xf4000000/33554432, 0xe8000000/134217728, 0xf0000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 
[    13.569] (II) Open ACPI successful (/var/run/acpid.socket) 
[    13.569] Initializing built-in extension Generic Event Extension 
[    13.569] Initializing built-in extension SHAPE 
[    13.569] Initializing built-in extension MIT-SHM 
[    13.569] Initializing built-in extension XInputExtension 
[    13.569] Initializing built-in extension XTEST 
[    13.569] Initializing built-in extension BIG-REQUESTS 
[    13.569] Initializing built-in extension SYNC 
[    13.569] Initializing built-in extension XKEYBOARD 
[    13.569] Initializing built-in extension XC-MISC 
[    13.569] Initializing built-in extension SECURITY 
[    13.569] Initializing built-in extension XINERAMA 
[    13.569] Initializing built-in extension XFIXES 
[    13.569] Initializing built-in extension RENDER 
[    13.569] Initializing built-in extension RANDR 
[    13.569] Initializing built-in extension COMPOSITE 
[    13.569] Initializing built-in extension DAMAGE 
[    13.569] Initializing built-in extension MIT-SCREEN-SAVER 
[    13.569] Initializing built-in extension DOUBLE-BUFFER 
[    13.569] Initializing built-in extension RECORD 
[    13.569] Initializing built-in extension DPMS 
[    13.569] Initializing built-in extension X-Resource 
[    13.569] Initializing built-in extension XVideo 
[    13.569] Initializing built-in extension XVideo-MotionCompensation 
[    13.569] Initializing built-in extension SELinux 
[    13.569] Initializing built-in extension XFree86-VidModeExtension 
[    13.569] Initializing built-in extension XFree86-DGA 
[    13.569] Initializing built-in extension XFree86-DRI 
[    13.569] Initializing built-in extension DRI2 
[    13.569] (II) "glx" will be loaded by default. 
[    13.569] (WW) "xmir" is not to be loaded by default. Skipping. 
[    13.569] (II) LoadModule: "dri2" 
[    13.569] (II) Module "dri2" already built-in 
[    13.569] (II) LoadModule: "glamoregl" 
[    13.624] (II) Loading /usr/lib/xorg/modules/libglamoregl.so 
[    13.714] (II) Module glamoregl: vendor="X.Org Foundation" 
[    13.714]  compiled for 1.14.3, module version = 0.5.1 
[    13.714]  ABI class: X.Org ANSI C Emulation, version 0.4 
[    13.714] (II) LoadModule: "glx" 
[    13.714] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so 
[    13.730] (II) Module glx: vendor="NVIDIA Corporation" 
[    13.730]  compiled for 4.0.2, module version = 1.0.0 
[    13.730]  Module class: X.Org Server Extension 
[    13.730] (II) NVIDIA GLX Module  304.88  Wed Mar 27 14:46:57 PDT 2013 
[    13.730] Loading extension GLX 
[    13.730] (==) Matched nvidia as autoconfigured driver 0 
[    13.730] (==) Matched nouveau as autoconfigured driver 1 
[    13.730] (==) Matched vesa as autoconfigured driver 2 
[    13.730] (==) Matched modesetting as autoconfigured driver 3 
[    13.730] (==) Matched fbdev as autoconfigured driver 4 
[    13.730] (==) Assigned the driver to the xf86ConfigLayout 
[    13.730] (II) LoadModule: "nvidia" 
[    13.730] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so 
[    13.732] (II) Module nvidia: vendor="NVIDIA Corporation" 
[    13.732]  compiled for 4.0.2, module version = 1.0.0 
[    13.732]  Module class: X.Org Video Driver 
[    13.732] (II) LoadModule: "nouveau" 
[    13.739] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so 
[    13.739] (II) Module nouveau: vendor="X.Org Foundation" 
[    13.739]  compiled for 1.14.2.901, module version = 1.0.9 
[    13.739]  Module class: X.Org Video Driver 
[    13.739]  ABI class: X.Org Video Driver, version 14.1 
[    13.740] (II) LoadModule: "vesa" 
[    13.740] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so 
[    13.740] (II) Module vesa: vendor="X.Org Foundation" 
[    13.740]  compiled for 1.14.1, module version = 2.3.2 
[    13.740]  Module class: X.Org Video Driver 
[    13.740]  ABI class: X.Org Video Driver, version 14.1 
[    13.740] (II) LoadModule: "modesetting" 
[    13.740] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so 
[    13.740] (II) Module modesetting: vendor="X.Org Foundation" 
[    13.740]  compiled for 1.14.1, module version = 0.8.0 
[    13.740]  Module class: X.Org Video Driver 
[    13.740]  ABI class: X.Org Video Driver, version 14.1 
[    13.740] (II) LoadModule: "fbdev" 
[    13.740] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so 
[    13.741] (II) Module fbdev: vendor="X.Org Foundation" 
[    13.741]  compiled for 1.14.1, module version = 0.4.3 
[    13.741]  Module class: X.Org Video Driver 
[    13.741]  ABI class: X.Org Video Driver, version 14.1 
[    13.741] (II) NVIDIA dlloader X Driver  304.88  Wed Mar 27 14:28:14 PDT 2013 
[    13.741] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs 
[    13.741] (II) NOUVEAU driver Date:   Wed Jul 31 10:51:03 2013 +1000 
[    13.741] (II) NOUVEAU driver for NVIDIA chipset families : 
[    13.741]  RIVA TNT        (NV04) 
[    13.741]  RIVA TNT2       (NV05) 
[    13.741]  GeForce 256     (NV10) 
[    13.741]  GeForce 2       (NV11, NV15) 
[    13.741]  GeForce 4MX     (NV17, NV18) 
[    13.741]  GeForce 3       (NV20) 
[    13.741]  GeForce 4Ti     (NV25, NV28) 
[    13.741]  GeForce FX      (NV3x) 
[    13.741]  GeForce 6       (NV4x) 
[    13.741]  GeForce 7       (G7x) 
[    13.741]  GeForce 8       (G8x) 
[    13.741]  GeForce GTX 200 (NVA0) 
[    13.741]  GeForce GTX 400 (NVC0) 
[    13.741] (II) VESA: driver for VESA chipsets: vesa 
[    13.741] (II) modesetting: Driver for Modesetting Kernel Drivers: kms 
[    13.741] (II) FBDEV: driver for framebuffer: fbdev 
[    13.741] (++) using VT number 7 
 
[    13.754] (II) Loading sub module "fb" 
[    13.754] (II) LoadModule: "fb" 
[    13.754] (II) Loading /usr/lib/xorg/modules/libfb.so 
[    13.754] (II) Module fb: vendor="X.Org Foundation" 
[    13.754]  compiled for 1.14.5, module version = 1.0.0 
[    13.754]  ABI class: X.Org ANSI C Emulation, version 0.4 
[    13.755] (II) Loading sub module "wfb" 
[    13.755] (II) LoadModule: "wfb" 
[    13.755] (II) Loading /usr/lib/xorg/modules/libwfb.so 
[    13.755] (II) Module wfb: vendor="X.Org Foundation" 
[    13.755]  compiled for 1.14.5, module version = 1.0.0 
[    13.755]  ABI class: X.Org ANSI C Emulation, version 0.4 
[    13.755] (II) Loading sub module "ramdac" 
[    13.755] (II) LoadModule: "ramdac" 
[    13.755] (II) Module "ramdac" already built-in 
[    13.755] (WW) Falling back to old probe method for vesa 
[    13.755] (WW) Falling back to old probe method for modesetting 
[    13.755] (EE) open /dev/dri/card0: No such file or directory 
[    13.755] (WW) Falling back to old probe method for fbdev 
[    13.755] (II) Loading sub module "fbdevhw" 
[    13.755] (II) LoadModule: "fbdevhw" 
[    13.755] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so 
[    13.755] (II) Module fbdevhw: vendor="X.Org Foundation" 
[    13.755]  compiled for 1.14.5, module version = 0.0.2 
[    13.755]  ABI class: X.Org Video Driver, version 14.1 
[    13.755] (EE) open /dev/fb0: No such file or directory 
[    13.755] (II) NVIDIA(0): Creating default Display subsection in Screen section 
 "Default Screen Section" for depth/fbbpp 24/32 
[    13.755] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32 
[    13.755] (==) NVIDIA(0): RGB weight 888 
[    13.755] (==) NVIDIA(0): Default visual is TrueColor 
[    13.755] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) 
[    13.755] (**) NVIDIA(0): Enabling 2D acceleration 
[    14.327] (II) NVIDIA(GPU-0): Display (AOC 2350 (DFP-0)) does not support NVIDIA 3D Vision 
[    14.327] (II) NVIDIA(GPU-0):     stereo. 
[    14.328] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 (GF114) at PCI:1:0:0 (GPU-0) 
[    14.328] (--) NVIDIA(0): Memory: 1048576 kBytes 
[    14.328] (--) NVIDIA(0): VideoBIOS: 70.24.21.00.00 
[    14.328] (II) NVIDIA(0): Detected PCI Express Link width: 16X 
[    14.328] (--) NVIDIA(0): Interlaced video modes are supported on this GPU 
[    14.329] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 560 at PCI:1:0:0 
[    14.329] (--) NVIDIA(0):     CRT-0 
[    14.329] (--) NVIDIA(0):     CRT-1 
[    14.329] (--) NVIDIA(0):     AOC 2350 (DFP-0) (connected) 
[    14.329] (--) NVIDIA(0):     DFP-1 
[    14.329] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock 
[    14.329] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock 
[    14.329] (--) NVIDIA(0): AOC 2350 (DFP-0): 330.0 MHz maximum pixel clock 
[    14.329] (--) NVIDIA(0): AOC 2350 (DFP-0): Internal Dual Link TMDS 
[    14.329] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock 
[    14.329] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS 
[    14.329] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display 
[    14.329] (**) NVIDIA(0):     device AOC 2350 (DFP-0) (Using EDID frequencies has been 
[    14.329] (**) NVIDIA(0):     enabled on all display devices.) 
[    14.330] (==) NVIDIA(0):  
[    14.330] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" 
[    14.330] (==) NVIDIA(0):     will be used as the requested mode. 
[    14.330] (==) NVIDIA(0):  
[    14.330] (II) NVIDIA(0): Validated MetaModes: 
[    14.330] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select" 
[    14.330] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080 
[    14.356] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config 
[    14.356] (--) NVIDIA(0):     option 
[    14.356] (II) UnloadModule: "nouveau" 
[    14.356] (II) Unloading nouveau 
[    14.357] (II) UnloadModule: "vesa" 
[    14.357] (II) Unloading vesa 
[    14.357] (II) UnloadModule: "modesetting" 
[    14.357] (II) Unloading modesetting 
[    14.357] (II) UnloadModule: "fbdev" 
[    14.357] (II) Unloading fbdev 
[    14.357] (II) UnloadSubModule: "fbdevhw" 
[    14.357] (II) Unloading fbdevhw 
[    14.357] (--) Depth 24 pixmap format is 32 bpp 
[    14.357] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory 
[    14.357] (II) NVIDIA:     access. 
[    14.361] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select" 
[    14.390] Loading extension NV-GLX 
[    14.435] (==) NVIDIA(0): Disabling shared memory pixmaps 
[    14.435] (==) NVIDIA(0): Backing store disabled 
[    14.435] (==) NVIDIA(0): Silken mouse enabled 
[    14.435] (==) NVIDIA(0): DPMS enabled 
[    14.435] Loading extension NV-CONTROL 
[    14.435] Loading extension XINERAMA 
[    14.436] (II) Loading sub module "dri2" 
[    14.436] (II) LoadModule: "dri2" 
[    14.436] (II) Module "dri2" already built-in 
[    14.436] (II) NVIDIA(0): [DRI2] Setup complete 
[    14.436] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia 
[    14.436] (--) RandR disabled 
[    14.438] (II) SELinux: Disabled on system 
[    14.438] (II) Initializing extension GLX 
[    14.444] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm 
[    14.445] (II) config/udev: Adding input device Power Button (/dev/input/event1) 
[    14.445] (**) Power Button: Applying InputClass "evdev keyboard catchall" 
[    14.445] (II) LoadModule: "evdev" 
[    14.446] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so 
[    14.446] (II) Module evdev: vendor="X.Org Foundation" 
[    14.446]  compiled for 1.14.1, module version = 2.7.3 
[    14.446]  Module class: X.Org XInput Driver 
[    14.446]  ABI class: X.Org XInput driver, version 19.1 
[    14.446] (II) Using input driver 'evdev' for 'Power Button' 
[    14.446] (**) Power Button: always reports core events 
[    14.446] (**) evdev: Power Button: Device: "/dev/input/event1" 
[    14.446] (--) evdev: Power Button: Vendor 0 Product 0x1 
[    14.446] (--) evdev: Power Button: Found keys 
[    14.446] (II) evdev: Power Button: Configuring as keyboard 
[    14.446] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" 
[    14.446] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) 
[    14.446] (**) Option "xkb_rules" "evdev" 
[    14.446] (**) Option "xkb_model" "pc105" 
[    14.446] (**) Option "xkb_layout" "fr" 
[    14.447] (II) XKB: reuse xkmfile /var/lib/xkb/server-1CA37FD61409D6C1EDB80880DF2DB1A574556A6A.xkm 
[    14.447] (II) config/udev: Adding input device Power Button (/dev/input/event0) 
[    14.447] (**) Power Button: Applying InputClass "evdev keyboard catchall" 
[    14.447] (II) Using input driver 'evdev' for 'Power Button' 
[    14.447] (**) Power Button: always reports core events 
[    14.447] (**) evdev: Power Button: Device: "/dev/input/event0" 
[    14.447] (--) evdev: Power Button: Vendor 0 Product 0x1 
[    14.447] (--) evdev: Power Button: Found keys 
[    14.447] (II) evdev: Power Button: Configuring as keyboard 
[    14.447] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0" 
[    14.447] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) 
[    14.447] (**) Option "xkb_rules" "evdev" 
[    14.447] (**) Option "xkb_model" "pc105" 
[    14.447] (**) Option "xkb_layout" "fr" 
[    14.447] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event10) 
[    14.447] (II) No input driver specified, ignoring this device. 
[    14.447] (II) This device may have been added with another device file. 
[    14.448] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11) 
[    14.448] (II) No input driver specified, ignoring this device. 
[    14.448] (II) This device may have been added with another device file. 
[    14.448] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event12) 
[    14.448] (II) No input driver specified, ignoring this device. 
[    14.448] (II) This device may have been added with another device file. 
[    14.448] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13) 
[    14.448] (II) No input driver specified, ignoring this device. 
[    14.448] (II) This device may have been added with another device file. 
[    14.448] (II) config/udev: Adding input device   USB Keyboard (/dev/input/event15) 
[    14.448] (**)   USB Keyboard: Applying InputClass "evdev keyboard catchall" 
[    14.448] (II) Using input driver 'evdev' for '  USB Keyboard' 
[    14.448] (**)   USB Keyboard: always reports core events 
[    14.448] (**) evdev:   USB Keyboard: Device: "/dev/input/event15" 
[    14.448] (--) evdev:   USB Keyboard: Vendor 0x4d9 Product 0x1603 
[    14.448] (--) evdev:   USB Keyboard: Found keys 
[    14.448] (II) evdev:   USB Keyboard: Configuring as keyboard 
[    14.448] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input15/event15" 
[    14.448] (II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD, id 8) 
[    14.448] (**) Option "xkb_rules" "evdev" 
[    14.448] (**) Option "xkb_model" "pc105" 
[    14.448] (**) Option "xkb_layout" "fr" 
[    14.448] (II) config/udev: Adding input device   USB Keyboard (/dev/input/event16) 
[    14.448] (**)   USB Keyboard: Applying InputClass "evdev keyboard catchall" 
[    14.448] (II) Using input driver 'evdev' for '  USB Keyboard' 
[    14.448] (**)   USB Keyboard: always reports core events 
[    14.448] (**) evdev:   USB Keyboard: Device: "/dev/input/event16" 
[    14.448] (--) evdev:   USB Keyboard: Vendor 0x4d9 Product 0x1603 
[    14.448] (--) evdev:   USB Keyboard: Found keys 
[    14.448] (II) evdev:   USB Keyboard: Configuring as keyboard 
[    14.448] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.1/input/input16/event16" 
[    14.448] (II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD, id 9) 
[    14.448] (**) Option "xkb_rules" "evdev" 
[    14.448] (**) Option "xkb_model" "pc105" 
[    14.448] (**) Option "xkb_layout" "fr" 
[    14.448] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event14) 
[    14.448] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" 
[    14.448] (II) Using input driver 'evdev' for 'USB Optical Mouse' 
[    14.448] (**) USB Optical Mouse: always reports core events 
[    14.448] (**) evdev: USB Optical Mouse: Device: "/dev/input/event14" 
[    14.448] (--) evdev: USB Optical Mouse: Vendor 0x15ca Product 0xc3 
[    14.448] (--) evdev: USB Optical Mouse: Found 3 mouse buttons 
[    14.448] (--) evdev: USB Optical Mouse: Found scroll wheel(s) 
[    14.448] (--) evdev: USB Optical Mouse: Found relative axes 
[    14.448] (--) evdev: USB Optical Mouse: Found x and y relative axes 
[    14.448] (II) evdev: USB Optical Mouse: Configuring as mouse 
[    14.448] (II) evdev: USB Optical Mouse: Adding scrollwheel support 
[    14.448] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 
[    14.448] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 
[    14.448] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/input/input14/event14" 
[    14.448] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10) 
[    14.448] (II) evdev: USB Optical Mouse: initialized for relative axes. 
[    14.448] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 
[    14.448] (**) USB Optical Mouse: (accel) acceleration profile 0 
[    14.448] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 
[    14.448] (**) USB Optical Mouse: (accel) acceleration threshold: 4 
[    14.448] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0) 
[    14.448] (II) No input driver specified, ignoring this device. 
[    14.448] (II) This device may have been added with another device file. 
[    14.449] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event2) 
[    14.449] (II) No input driver specified, ignoring this device. 
[    14.449] (II) This device may have been added with another device file. 
[    14.449] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event3) 
[    14.449] (II) No input driver specified, ignoring this device. 
[    14.449] (II) This device may have been added with another device file. 
[    14.449] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event4) 
[    14.449] (II) No input driver specified, ignoring this device. 
[    14.449] (II) This device may have been added with another device file. 
[    14.449] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event5) 
[    14.449] (II) No input driver specified, ignoring this device. 
[    14.449] (II) This device may have been added with another device file. 
[    14.449] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event6) 
[    14.449] (II) No input driver specified, ignoring this device. 
[    14.449] (II) This device may have been added with another device file. 
[    14.449] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event7) 
[    14.449] (II) No input driver specified, ignoring this device. 
[    14.449] (II) This device may have been added with another device file. 
[    14.449] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8) 
[    14.449] (II) No input driver specified, ignoring this device. 
[    14.449] (II) This device may have been added with another device file. 
[    14.449] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9) 
[    14.449] (II) No input driver specified, ignoring this device. 
[    14.449] (II) This device may have been added with another device file. 
[    31.504] (II) NVIDIA(GPU-0): Display (AOC 2350 (DFP-0)) does not support NVIDIA 3D Vision 
[    31.504] (II) NVIDIA(GPU-0):     stereo. 
[    31.504] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display 
[    31.504] (**) NVIDIA(0):     device AOC 2350 (DFP-0) (Using EDID frequencies has been 
[    31.504] (**) NVIDIA(0):     enabled on all display devices.) 
[    46.019] (II) NVIDIA(GPU-0): Display (AOC 2350 (DFP-0)) does not support NVIDIA 3D Vision 
[    46.019] (II) NVIDIA(GPU-0):     stereo. 
[    46.019] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display 
[    46.019] (**) NVIDIA(0):     device AOC 2350 (DFP-0) (Using EDID frequencies has been 
[    46.019] (**) NVIDIA(0):     enabled on all display devices.) 
[    46.066] (II) NVIDIA(GPU-0): Display (AOC 2350 (DFP-0)) does not support NVIDIA 3D Vision 
[    46.067] (II) NVIDIA(GPU-0):     stereo. 
[    46.067] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display 
[    46.067] (**) NVIDIA(0):     device AOC 2350 (DFP-0) (Using EDID frequencies has been 
[    46.067] (**) NVIDIA(0):     enabled on all display devices.) 
daedalus@orthanc:/var/log$  

Dernière modification par Yog Sothoth (Le 10/04/2014, à 19:57)


Intel 4770K@4.1 Ghz GTX 560 8Go RAM corsair DDR3. Xubuntu 13.10

Hors ligne

#2 Le 10/04/2014, à 20:08

nam1962

Re : Machine qui freeze souvent (Xubuntu 13.10)

Passe voir la section C du tuto dans ma signature.
..Sinon, pose toi la question de la pâte thermique séchée...


Mon tuto pour optimiser / finaliser une install : http://forum.ubuntu-fr.org/viewtopic.ph … #p15041961
Xubuntu 14.10 sur portable, 14.04 sur fixe, 14.04 chez mes amis.
Score : 49 convertis (leur ai pas donné le choix, aussi...).
Un jeune site que j'aime bien, qui fait du T-shirt la nouvelle élégance ...bio en plus : http://goudronblanc.com

En ligne

#3 Le 10/04/2014, à 20:32

Yog Sothoth

Re : Machine qui freeze souvent (Xubuntu 13.10)

Je lis ça... Pour la pâte thermique du GPU, je n'aurais pas le même problème avec deux cartes graphiques différentes. non ? Quand à celle du CPU, c'est la noctua du ventirad et mes températures sont plus basses qu'avant. Avec le ventirad intel.  Et il tenait bien avant.


Intel 4770K@4.1 Ghz GTX 560 8Go RAM corsair DDR3. Xubuntu 13.10

Hors ligne

#4 Le 10/04/2014, à 20:57

Baltus

Re : Machine qui freeze souvent (Xubuntu 13.10)

Yog Sothoth a écrit :

Mes températures tournent autour de 64 °C avec un noctua.NHU12P. Avec le rad intel, sans OC elles étaient de 99°C.

C'est beaucoup quand même 99°C avec le ventirad Intel sans OC.
Je dirais même que c'est anormal hmm

Avec le Noctua, c'est plus dans la norme. Es-tu sûr de tes réglages dans le setup UEFI ?

Hors ligne

#5 Le 11/04/2014, à 10:37

Yog Sothoth

Re : Machine qui freeze souvent (Xubuntu 13.10)

Je n'ai pas touché à tout. J'ai mis le turbo à 4,2 ghz (4,1 la) et le vcore à 1,20 (1,21 la). Il a très bien tenu pendant des semaines sans planter du tout. Si j'avais merdé avec les règlages de la carte mère je pense qu'il aurait  planté plus tôt.


Sous windows, le pire que j'ai eu c'est une récupération de pilote GPU quand je minais du DOGE. Ce la ne plantait pas le système et il suffisait de relancer le mineur. Mais je ne suis que très rarement sous windows. J'avais demandé sur HFR si il y avait des logiciels fiables pour tester son alimentation (j'ai une corsair TX650 de 4 ans et demi dont je suis content). J'ai lu qu'OCCT n'éait pas fiable pour ça.

Ma Machine a bien fonctionné depuis janvier pourtant.

EDIT: Maintenant que j'y pense j'ai une install ratée de compiz sur cette machine mais je crois qu'elle date de bien avant mes ennuis.

Pour les 95-99°C avec le ventirad, la machine était en charge sous BOINC.

Dernière modification par Yog Sothoth (Le 11/04/2014, à 10:41)


Intel 4770K@4.1 Ghz GTX 560 8Go RAM corsair DDR3. Xubuntu 13.10

Hors ligne

#6 Le 13/04/2014, à 17:17

Yog Sothoth

Re : Machine qui freeze souvent (Xubuntu 13.10)

Je pense avoir trouvé: Ce serait BOINC qui planterait ma machine. La je l'ai fait miner un crapcoin CPU quelconque (autant récupérer sur la facture d'électricité...) durant plusieurs heures et il n'a pas planté. J'ai essayé en lui faisant calculer sur 7 threads au lieu de 8 et il a planté. J'essaye avec 6 on verra bien.


Intel 4770K@4.1 Ghz GTX 560 8Go RAM corsair DDR3. Xubuntu 13.10

Hors ligne

Haut de page ↑