#1 Le 16/01/2015, à 19:55
- Laurent68
[RESOLU] No operating system found/Ubuntu 14.04
Bonjour a tous,
j'essais d'installer Ubuntu 14.04 sur un Lenovo C460, l'intallation se passe nickel jusque-la pas de soucis.
Ubuntu me demande de redemarrer, donc je redemarre et la!!!
Error 1962: No operating system found. Boot sequence will automatically reapeat
Quelqu'un aurais-t-il une solution? Je desespere
merci a vous,
Laurent
Deso pas d'accent sur mon clavier
Dernière modification par Laurent68 (Le 17/01/2015, à 13:50)
Hors ligne
#2 Le 16/01/2015, à 20:11
- sinbad83
Re : [RESOLU] No operating system found/Ubuntu 14.04
Salut,
pour voir où tu en es, démarre en session Live (LiveUSB ou LiveDVD), ouvre un terminal (Ctl+Alt+T) et entre la commande os-prober pour rechercher les OS présents.
sudo os-prober
Tu devrais le trouver en sda1.
As-tu installé avec le /home séparé de la racine ?
La connaissance n'est pas une denrée rare, il faut la partager avec les autres.
Linux registered #484707
Site: www.coursinforev.org/doku.php
Desktop AMD Ryzen 5-3600, RAM 16GB, Ubuntu 20.10, HP Pavillon G6 Ubuntu 20.10 et Ten, Serveur Ubuntu 18.04
Hors ligne
#3 Le 16/01/2015, à 20:13
- Bougron
Re : [RESOLU] No operating system found/Ubuntu 14.04
Bonsoir
Peux-tu faire un boot-info s'il te plaît https://doc.ubuntu-fr.org/tutoriel/boot-info
Ne tentes pas de réparer.
Hors ligne
#4 Le 16/01/2015, à 20:29
- Laurent68
Re : [RESOLU] No operating system found/Ubuntu 14.04
Salut sinbad83,
alors la reponse est:
/dev/sda2:ubuntu 14.04.1 LTS (14.04) :Ubuntu: Linux
et oui j'avais deja essaye d'installer le home a part mais cela ne change rien...
Hors ligne
#5 Le 16/01/2015, à 20:50
- Laurent68
Re : [RESOLU] No operating system found/Ubuntu 14.04
Hors ligne
#6 Le 16/01/2015, à 20:52
- sinbad83
Re : [RESOLU] No operating system found/Ubuntu 14.04
Ta machine doit être récente, il faudrait y voir de plus près. Toujours en Live:
sudo parted -l # avec un L minuscule
La connaissance n'est pas une denrée rare, il faut la partager avec les autres.
Linux registered #484707
Site: www.coursinforev.org/doku.php
Desktop AMD Ryzen 5-3600, RAM 16GB, Ubuntu 20.10, HP Pavillon G6 Ubuntu 20.10 et Ten, Serveur Ubuntu 18.04
Hors ligne
#7 Le 16/01/2015, à 20:56
- Laurent68
Re : [RESOLU] No operating system found/Ubuntu 14.04
voila sinbad,
ubuntu@ubuntu:~$ sudo parted -l
Model: ATA ST1000DM003-1CH1 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 boot
2 538MB 996GB 995GB ext4
3 996GB 1000GB 4204MB linux-swap(v1)
Model: (scsi)
Disk /dev/sdb: 15,5GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 4129kB 15,5GB 15,5GB primary fat32 boot, lba
merci
Hors ligne
#8 Le 17/01/2015, à 08:51
- malbo
Re : [RESOLU] No operating system found/Ubuntu 14.04
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Nov2014]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector
25648040 of the same hard drive for core.img. core.img is at this location
and looks for (,gpt1)/boot/grub.
=> Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.03 2010-10-22 ........>..sr>........V.9...0...~.....~...f...M.f.f....f..0~....>E}.u......
Boot sector info: Syslinux looks at sector 2091584 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi
/EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 1,945,313,279 1,944,262,656 Data partition (Linux)
/dev/sda3 1,945,313,280 1,953,523,711 8,210,432 Swap partition (Linux)
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 15.5 GB, 15504900096 bytes
43 heads, 43 sectors/track, 16378 cylinders, total 30283008 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 8,064 30,283,007 30,274,944 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 0529-A16F vfat
/dev/sda2 a49f29b5-34f6-453f-a68a-508c82cede22 ext4
/dev/sda3 52d88a3e-751e-4d03-9ea7-f96a82e32466 swap
/dev/sdb1 5251-44FD vfat UBU
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jan 16 18:04 ata-PLDS_DVD-RW_DU8A5SH_O10A11861L1CB3C04H60 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jan 16 18:47 ata-ST1000DM003-1CH162_W1D3GF06 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 16 18:04 ata-ST1000DM003-1CH162_W1D3GF06-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 16 18:04 ata-ST1000DM003-1CH162_W1D3GF06-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 16 18:04 ata-ST1000DM003-1CH162_W1D3GF06-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 Jan 16 18:47 usb-__0708485EA41B6332-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 16 18:04 usb-__0708485EA41B6332-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Jan 16 18:47 wwn-0x5000c5007339cd08 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 16 18:04 wwn-0x5000c5007339cd08-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 16 18:04 wwn-0x5000c5007339cd08-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 16 18:04 wwn-0x5000c5007339cd08-part3 -> ../../sda3
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 a49f29b5-34f6-453f-a68a-508c82cede22
else
search --no-floppy --fs-uuid --set=root a49f29b5-34f6-453f-a68a-508c82cede22
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-a49f29b5-34f6-453f-a68a-508c82cede22' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 a49f29b5-34f6-453f-a68a-508c82cede22
else
search --no-floppy --fs-uuid --set=root a49f29b5-34f6-453f-a68a-508c82cede22
fi
linux /boot/vmlinuz-3.13.0-44-generic.efi.signed root=UUID=a49f29b5-34f6-453f-a68a-508c82cede22 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-44-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-a49f29b5-34f6-453f-a68a-508c82cede22' {
menuentry 'Ubuntu, avec Linux 3.13.0-44-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-44-generic-advanced-a49f29b5-34f6-453f-a68a-508c82cede22' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 a49f29b5-34f6-453f-a68a-508c82cede22
else
search --no-floppy --fs-uuid --set=root a49f29b5-34f6-453f-a68a-508c82cede22
fi
echo 'Chargement de Linux 3.13.0-44-generic…'
linux /boot/vmlinuz-3.13.0-44-generic.efi.signed root=UUID=a49f29b5-34f6-453f-a68a-508c82cede22 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-44-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-44-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-44-generic-recovery-a49f29b5-34f6-453f-a68a-508c82cede22' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 a49f29b5-34f6-453f-a68a-508c82cede22
else
search --no-floppy --fs-uuid --set=root a49f29b5-34f6-453f-a68a-508c82cede22
fi
echo 'Chargement de Linux 3.13.0-44-generic…'
linux /boot/vmlinuz-3.13.0-44-generic.efi.signed root=UUID=a49f29b5-34f6-453f-a68a-508c82cede22 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-44-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-advanced-a49f29b5-34f6-453f-a68a-508c82cede22' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 a49f29b5-34f6-453f-a68a-508c82cede22
else
search --no-floppy --fs-uuid --set=root a49f29b5-34f6-453f-a68a-508c82cede22
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=a49f29b5-34f6-453f-a68a-508c82cede22 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-recovery-a49f29b5-34f6-453f-a68a-508c82cede22' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 a49f29b5-34f6-453f-a68a-508c82cede22
else
search --no-floppy --fs-uuid --set=root a49f29b5-34f6-453f-a68a-508c82cede22
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=a49f29b5-34f6-453f-a68a-508c82cede22 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=a49f29b5-34f6-453f-a68a-508c82cede22 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=0529-A16F /boot/efi vfat defaults 0 1
# swap was on /dev/sda3 during installation
UUID=52d88a3e-751e-4d03-9ea7-f96a82e32466 none swap sw 0 0
--------------------------------------------------------------------------------
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- persistent
label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit persistent
label ubnentry1
menu label ^Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- persistent
label ubnentry2
menu label ^Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash -- persistent
label ubnentry3
menu label ^Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash -- persistent
label ubnentry4
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit persistent
label ubnentry5
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit persistent
label ubnentry6
menu label Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- persistent
label ubnentry7
menu label Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash -- persistent
label ubnentry8
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true -- persistent
label ubnentry9
menu label Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash -- persistent
--------------------------------------------------------------------------------
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
menu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
cat: write error: Broken pipe
File descriptor 9 (/proc/6985/mounts) leaked on lvs invocation. Parent PID 12855: bash
File descriptor 63 (pipe:[59863]) leaked on lvs invocation. Parent PID 12855: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-01-16__18h47 ===================
boot-info version : 4ppa32
boot-sav version : 4ppa32
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa32
boot-info is executed in live-session (Ubuntu 14.04.1 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
ls: cannot access /home/usr/.config: No such file or directory
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda2:Ubuntu 14.04.1 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/sda1: UUID="0529-A16F" TYPE="vfat"
/dev/sda2: UUID="a49f29b5-34f6-453f-a68a-508c82cede22" TYPE="ext4"
/dev/loop0: TYPE="squashfs"
/dev/sda3: UUID="52d88a3e-751e-4d03-9ea7-f96a82e32466" TYPE="swap"
/dev/sdb1: LABEL="UBU" UUID="5251-44FD" TYPE="vfat"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== sda2/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juil. 22 22:21 grub.d
total 76
-rwxr-xr-x 1 root root 9424 mai 15 2014 00_header
-rwxr-xr-x 1 root root 6058 mai 8 2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 mai 15 2014 10_linux
-rwxr-xr-x 1 root root 10412 mai 15 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai 15 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 mai 15 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mai 15 2014 40_custom
-rwxr-xr-x 1 root root 216 mai 15 2014 41_custom
-rw-r--r-- 1 root root 483 mai 15 2014 README
=================== sda2/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=0529-A16F (sda1)
=================== efibootmgr -v
BootCurrent: 0012
Timeout: 1 seconds
BootOrder: 0012,0005,0004,0011,0000
Boot0000* ubuntu Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)
Boot0004* Generic Usb Device Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)
Boot0005* CD/DVD Device Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)
Boot0011* ubuntu Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)
Boot0012* UEFI: PMAP ACPI(a0341d0,0)PCI(1d,0)USB(1,0)USB(1,0)HD(1,1f80,1cdf580,1f57b368)..BO
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ST1000DM003-1CH1 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 boot
2 538MB 996GB 995GB ext4
3 996GB 1000GB 4204MB linux-swap(v1)
Model: (scsi)
Disk /dev/sdb: 15.5GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 4129kB 15.5GB 15.5GB primary fat32 boot, lba
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA ST1000DM003-1CH1;
1:1049kB:538MB:537MB:fat32::boot;
2:538MB:996GB:995GB:ext4::;
3:996GB:1000GB:4204MB:linux-swap(v1)::;
BYT;
/dev/sdb:15.5GB:scsi:512:512:msdos: ;
1:4129kB:15.5GB:15.5GB:fat32::boot, lba;
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 fe 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 6f a1 29 05 4e 4f 20 4e 41 4d 45 20 20 |..)o.).NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 1.9G 133M 1.8G 7% /
udev devtmpfs 1.9G 12K 1.9G 1% /dev
tmpfs tmpfs 387M 1.3M 386M 1% /run
/dev/sdb1 vfat 15G 1.1G 14G 8% /cdrom
/dev/loop0 squashfs 939M 939M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 1.9G 1.2M 1.9G 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 1.9G 96K 1.9G 1% /run/shm
none tmpfs 100M 64K 100M 1% /run/user
/dev/sda1 vfat 511M 3.4M 508M 1% /mnt/boot-sav/sda1
/dev/sda2 ext4 913G 4.1G 862G 1% /mnt/boot-sav/sda2
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x64caa27a
Device Boot Start End Blocks Id System
/dev/sda1 1 1953525167 976762583+ ee GPT
Partition 1 does not start on physical sector boundary.
Disk /dev/sdb: 15.5 GB, 15504900096 bytes
43 heads, 43 sectors/track, 16378 cylinders, total 30283008 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x1f57b368
Device Boot Start End Blocks Id System
/dev/sdb1 * 8064 30283007 15137472 c W95 FAT32 (LBA)
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file rename-ms-efi
=================== User settings
The settings chosen by the user will not act on the boot.
Tu as fait une installation de Ubuntu en mode automatique : tout ce qu'il y avait sur le disque dur a été effacé et remplacé par une installation de Ubuntu qui occupe tout le disque dur. Tu n'as plus de Windows sur ton disque dur. Est-ce bien ce que tu voulais faire (virer Windows) ou non ?
Hors ligne
#9 Le 17/01/2015, à 09:22
- Laurent68
Re : [RESOLU] No operating system found/Ubuntu 14.04
Salut Malbo,
Oui c'est exactement se que je voulais faire, uniquement ubuntu, mais la au moment du redemarrage de fin d'installation j"ai:
Error 1962: No operating system found. Boot sequence will automatically reapeat
Hors ligne
#10 Le 17/01/2015, à 10:02
- malbo
Re : [RESOLU] No operating system found/Ubuntu 14.04
Dans ton "Bios", le Boot Mode en UEFI est activé (c'est ce qui est par défaut dans un ordi préinstallé Windows 8). Le gros gros souci, c'est que dans ce mode UEFI, le démarrage de ton ordi est bridé : quelque soient les installations d'autres OS que Windows, l'ordi démarre systématiquement sur un certain fichier qui se trouve sur le disque dur (le fichier \EFI\Microsoft\Boot\bootmgfw.efi dans cet exemple). Même quand on efface tout le disque dur, l'ordi continue à vouloir démarrer sur ce fichier fantôme qui a été effacé. Il existe des solutions de contournement de ce bridage, toutefois je te recommande de réinstaller Ubuntu en suivant cette procédure que j'ai validée récemment en virtualisation (ici) et qui doit fonctionner dans ton ordi :
1) dans l'UEFI (dans le nouveau "Bios"), désactiver "Fast Boot" (le cas échéant), désactiver "Secure Boot" et passer le "Boot Mode" sur "Legacy" au lieu de "UEFI" (chez certains fabricants, il faut activer "Launch CSM" qui est l'équivalent de "Legacy")
2) lancer l'installation de Ubuntu. A l'étape 3, sélectionner le mode automatique(*) qui écrase tout ce qui existe sur le disque dur pour installer Ubuntu.
Motif : le bridage du démarrage n'affecte que le "Boot Mode" en "UEFI" : il n'y a plus de bridage si on installe Ubuntu en mode non-EFI (désigné par "Legacy" dans ton "Bios")
EDIT : si j'en crois cette page qui est applicable pour ton modèle Lenovo C460 : http://www.manualsdir.com/manuals/47043 … ml?page=40
Tu as bien la possibilité dans ton "Bios" de passer le Boot Mode en Legacy (au lieu de UEFI)
(*) je pense que dans ton cas, tu devras sélectionner l'option "Supprimer Ubuntu 14.04.1 LTS et réinstaller" (j'en parle dans la partie "Essai d'installation de Ubuntu 14.04.1 (Trusty) qui écrase tout" de ce post)
Dernière modification par malbo (Le 17/01/2015, à 10:28)
Hors ligne
#11 Le 17/01/2015, à 11:39
- Laurent68
Re : [RESOLU] No operating system found/Ubuntu 14.04
resalut,
Merci pour toutes ces infos ;-)
arf! mais la autre soucis quand je boot en mode Legacy, j'ai un ecran noir et rien ne se passe.
que se passe-t-il?
Hors ligne
#12 Le 17/01/2015, à 12:14
- malbo
Re : [RESOLU] No operating system found/Ubuntu 14.04
quand je boot en mode Legacy, j'ai un ecran noir et rien ne se passe.
Je crois comprendre que tu n'arrives pas à bouter sur la liveUSB : je suppose que tu boutes sur le chargeur d'amorçage de Grub qui se trouves dans le MBR du disque dur et qu'on peut voir dans cet extrait de ton Boot-Info :
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector
25648040 of the same hard drive for core.img. core.img is at this location
and looks for (,gpt1)/boot/grub.
Ce chargeur d'amorçage n'a rien à faire là d'après moi : je me demande si tu n'aurais pas fait des essais de réparation un peu bizarres...
Je te propose la procédure suivante :
au démarrage de l'ordi :
1) tu connectes immédiatement ta liveUSB
2) tu appuies sur la touche F12 et tu la maintiens enfoncée jusqu'à l’apparition du Boot Menu : dans ce Boot menu, tu sélectionnes ta clé USB
Si cette procédure ne fonctionne pas, refais ta LiveUSB avec une autre clé (d'un autre fabricant si possible).
Hors ligne
#13 Le 17/01/2015, à 12:46
- Laurent68
Re : [RESOLU] No operating system found/Ubuntu 14.04
desole! je n'ai pas ete assez precis en fait re boot en mode legacy j'arrive sur les options je selectionne install ubuntu, et apres cela un ecran noir et la cle USB qui bosse pendand quelques minutes et rien ne se passe.
est-ce que je dois quand meme refaire une cle boot pour voir?
Mais je pense qu'elle est ok!
Hors ligne
#14 Le 17/01/2015, à 12:51
- Laurent68
Re : [RESOLU] No operating system found/Ubuntu 14.04
est-ce que cela pas quelque chose a voir avec la version de ubuntu?
quand je selectionne install ubuntu, l'ecran d'attente ubuntu saffiche et apres plus rien
Hors ligne
#15 Le 17/01/2015, à 13:41
- Laurent68
Re : [RESOLU] No operating system found/Ubuntu 14.04
Alors j'ai fait une nouvelle USB-boot et j'ai aussi changer la cle usb de port sur l'ordi, je ne sais pas la quel des deux actions a fait que, mais ca fonctionne parfaitement.
Merci a tous et surtout Malbo!
Hors ligne
#16 Le 17/01/2015, à 15:28
- malbo
Re : [RESOLU] No operating system found/Ubuntu 14.04
Félicitations.
A + sur le forum
Hors ligne