#1 Le 27/12/2007, à 18:44
- K -Lune noire
[RESOLU]webcam non reconnue dans le LSUSB
bonjour ,
Je viens d'acheter un portable MSI le EX600-023 tout marche a merveille sauf la Webcam,ben oui un peu comme d'hab!!
Le souci c'est que je n'ai rien avec le lsusb :
Bus 007 Device 001: ID 0000:0000
Bus 006 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 004 Device 002: ID 1241:1177 Belkin F8E842-DL Mouse
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000est ce mon driver de bus USB qui merdouille? pourquoi il ne detecte meme pas que suelsue chose est branché??? louche ....
En bref AU SECOURS 
Dernière modification par K -Lune noire (Le 09/01/2008, à 01:20)
- L'avenir appartient à ceux qui rêvent trop -
Hors ligne
#2 Le 27/12/2007, à 19:17
- schaars
Re : [RESOLU]webcam non reconnue dans le LSUSB
Je ne sais pas si ça peut t'aider, mais avec mon MSI M677-B3 je dois utiliser le pilote SN9Cxxx. Peut être qu'après l'avoir installé tu pourras utiliser ta webcam (par magie).
C'est quand même étonnant que lsusb ne donne rien. Et à tout hasard lspci ?
Le linux des uns est l'OS/2 des autres (Thom E. Gemcity)
Hors ligne
#3 Le 27/12/2007, à 19:18
- K -Lune noire
Re : [RESOLU]webcam non reconnue dans le LSUSB
oui ca m'inquiete un peu que j'ai rien avec lsusb .....
voici le contenu de lspci :
xavier@Kasskroot:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M G (rev a1)
03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
05:04.0 CardBus bridge: O2 Micro, Inc. OZ711SP1 Memory CardBus Controller (rev 01)
05:04.2 Generic system peripheral [0805]: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02)
05:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01)
05:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02)- L'avenir appartient à ceux qui rêvent trop -
Hors ligne
#4 Le 27/12/2007, à 19:27
- schaars
Re : [RESOLU]webcam non reconnue dans le LSUSB
Rien non plus avec lspci. Si tu as encore windows d'installé dessus, essaye de voir ce qu'il utilise comme matériel et pilote, déjà pour obtenir le nom de la webcam.
Le linux des uns est l'OS/2 des autres (Thom E. Gemcity)
Hors ligne
#5 Le 27/12/2007, à 19:48
- K -Lune noire
Re : [RESOLU]webcam non reconnue dans le LSUSB
alors j'ai pas installé Vista je suis entrain de voir aupres de MSI pour me le faire rembourser 
J'ai été voir sur le site pour trouver les driver alors visiblement ma webcam c'est une "Chicony WebCam"
les drivers sont seulement dispo pour XP & Vista bien sur 
apres une petite recherche sur le net la plupart des cams Chcony ont l'air plutot bien supportées reste a savoir pourquoi j'ai rien dans le lsusb
Dernière modification par K -Lune noire (Le 27/12/2007, à 19:52)
- L'avenir appartient à ceux qui rêvent trop -
Hors ligne
#6 Le 28/12/2007, à 11:22
- K -Lune noire
Re : [RESOLU]webcam non reconnue dans le LSUSB
changement du sujet du topic , et petit up pour de nouveaux conseils
- L'avenir appartient à ceux qui rêvent trop -
Hors ligne
#7 Le 28/12/2007, à 18:13
- K -Lune noire
Re : [RESOLU]webcam non reconnue dans le LSUSB
est ce que quelqu'un peux me dire comment mettre a jour mes drivers de bus USB ? monprobleme vient surement de ca non?
Est ce que ca pourrai marcher si je change de distrib???
- L'avenir appartient à ceux qui rêvent trop -
Hors ligne
#8 Le 03/01/2008, à 12:45
- K -Lune noire
Re : [RESOLU]webcam non reconnue dans le LSUSB
Bon des news du front j'ai essayé de mettre mandriva 2008 reputée pour sa compatibilité materielle mais rien de mieux elle ne reconnait pas non plus ma ca m toujours un "lsusb" vide......
je commence a desesperer 
- L'avenir appartient à ceux qui rêvent trop -
Hors ligne
#9 Le 03/01/2008, à 17:32
- K -Lune noire
Re : [RESOLU]webcam non reconnue dans le LSUSB
personne ne sait???
- L'avenir appartient à ceux qui rêvent trop -
Hors ligne
#10 Le 03/01/2008, à 18:17
- SgtGarcia
Re : [RESOLU]webcam non reconnue dans le LSUSB
A tout hazard, vérifie s'il n'y a pas d'erreur USB dans "dmesg" ou "/var/log/message"
Et fait un recherche dans le forum, il y a dejà eu des posts à propos des webcams Chicony.
Hors ligne
#11 Le 03/01/2008, à 19:03
- K -Lune noire
Re : [RESOLU]webcam non reconnue dans le LSUSB
alors j'ai rien trouvé d'anormal dans dsmeg a tout hasard je met le contenu de la konsole.
[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 08:02:57 UTC 2007 (Ubuntu 2.6.22-14.47-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffbe000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 262064) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262064
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262064
[ 0.000000] On node 0 totalpages: 262064
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32433 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F84A0 checksum 0
[ 0.000000] ACPI: RSDP 000F84A0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3FFB0000, 0040 (r1 MSI_NB MEGABOOK 20070517 MSFT 97)
[ 0.000000] ACPI: FACP 3FFB0200, 0084 (r2 051707 FACP1702 20070517 MSFT 97)
[ 0.000000] ACPI: DSDT 3FFB05B0, 5174 (r1 M1636 M1636000 0 INTL 20051117)
[ 0.000000] ACPI: FACS 3FFBE000, 0040
[ 0.000000] ACPI: APIC 3FFB0390, 005C (r1 051707 APIC1702 20070517 MSFT 97)
[ 0.000000] ACPI: MCFG 3FFB03F0, 003C (r1 051707 OEMMCFG 20070517 MSFT 97)
[ 0.000000] ACPI: SLIC 3FFB0430, 0176 (r1 MSI_NB MEGABOOK 20070517 MSFT 97)
[ 0.000000] ACPI: OEMB 3FFBE040, 0071 (r1 051707 OEMB1702 20070517 MSFT 97)
[ 0.000000] ACPI: HPET 3FFB5730, 0038 (r1 051707 OEMHPET 20070517 MSFT 97)
[ 0.000000] ACPI: SSDT 3FFBE940, 04E6 (r1 PmRef CpuPm 3000 INTL 20051117)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
[ 0.000000] Built 1 zonelists. Total pages: 260017
[ 0.000000] Kernel command line: root=UUID=e5a042e1-925e-4869-b626-50374e78c7f6 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1795.646 MHz processor.
[ 56.548955] Console: colour VGA+ 80x25
[ 56.549293] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 56.549609] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 56.574450] Memory: 1027628k/1048256k available (2015k kernel code, 19960k reserved, 916k data, 364k init, 130752k highmem)
[ 56.574458] virtual kernel memory layout:
[ 56.574459] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 56.574460] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 56.574461] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 56.574463] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 56.574464] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 56.574465] .data : 0xc02f7de6 - 0xc03dce84 ( 916 kB)
[ 56.574466] .text : 0xc0100000 - 0xc02f7de6 (2015 kB)
[ 56.574468] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 56.574497] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 56.574630] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 56.574635] hpet0: 3 64-bit timers, 14318180 Hz
[ 56.655609] Calibrating delay using timer specific routine.. 3595.07 BogoMIPS (lpj=7190147)
[ 56.655626] Security Framework v1.0.0 initialized
[ 56.655630] SELinux: Disabled at boot.
[ 56.655640] Mount-cache hash table entries: 512
[ 56.655735] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 56.655742] monitor/mwait feature present.
[ 56.655744] using mwait in idle threads.
[ 56.655747] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 56.655750] CPU: L2 cache: 2048K
[ 56.655752] CPU: Physical Processor ID: 0
[ 56.655753] CPU: Processor Core ID: 0
[ 56.655755] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 56.655763] Compat vDSO mapped to ffffe000.
[ 56.655773] Checking 'hlt' instruction... OK.
[ 56.671684] SMP alternatives: switching to UP code
[ 56.672043] Early unpacking initramfs... done
[ 56.976764] ACPI: Core revision 20070126
[ 56.976805] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 56.979338] CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
[ 56.979353] SMP alternatives: switching to SMP code
[ 56.979439] Booting processor 1/1 eip 3000
[ 56.989630] Initializing CPU#1
[ 57.067374] Calibrating delay using timer specific routine.. 3591.01 BogoMIPS (lpj=7182025)
[ 57.067380] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 57.067384] monitor/mwait feature present.
[ 57.067387] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 57.067389] CPU: L2 cache: 2048K
[ 57.067391] CPU: Physical Processor ID: 0
[ 57.067392] CPU: Processor Core ID: 1
[ 57.067393] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 57.067873] CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
[ 57.067896] Total of 2 processors activated (7186.08 BogoMIPS).
[ 57.068070] ENABLING IO-APIC IRQs
[ 57.068270] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 57.215376] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 57.235379] Brought up 2 CPUs
[ 57.266284] migration_cost=15
[ 57.266404] Booting paravirtualized kernel on bare hardware
[ 57.266490] Time: 16:28:45 Date: 00/03/108
[ 57.266508] NET: Registered protocol family 16
[ 57.266581] EISA bus registered
[ 57.266585] ACPI: bus type pci registered
[ 57.266761] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[ 57.266763] PCI: Using configuration type 1
[ 57.266764] Setting up standard PCI resources
[ 57.274707] ACPI: EC: Look up EC in DSDT
[ 57.275486] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 57.277895] ACPI: Interpreter enabled
[ 57.277897] ACPI: (supports S0 S1 S3 S4 S5)
[ 57.277914] ACPI: Using IOAPIC for interrupt routing
[ 57.278076] Error attaching device data
[ 57.278113] Error attaching device data
[ 57.285600] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 57.285705] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 57.285723] PCI: Probing PCI hardware (bus 00)
[ 57.287691] PCI: Transparent bridge - 0000:00:1e.0
[ 57.287839] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 57.287970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 57.288051] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 57.288153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 57.288230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 57.300832] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 57.300944] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 57.301055] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 57.301164] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 57.301273] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 57.301383] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 57.301491] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 57.301606] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 57.301711] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 57.301720] pnp: PnP ACPI init
[ 57.301726] ACPI: bus type pnp registered
[ 57.303816] pnp: PnP ACPI: found 13 devices
[ 57.303818] ACPI: ACPI bus type pnp unregistered
[ 57.303822] PnPBIOS: Disabled by ACPI PNP
[ 57.303862] PCI: Using ACPI for IRQ routing
[ 57.303865] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 57.324883] NET: Registered protocol family 8
[ 57.324886] NET: Registered protocol family 20
[ 57.324942] pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 57.324951] pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 57.324954] pnp: 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 57.324956] pnp: 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
[ 57.324962] pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[ 57.324964] pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 57.324969] pnp: 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 57.324974] pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 57.324976] pnp: 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 57.324979] pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 57.324982] pnp: 00:0c: iomem range 0x100000-0x3fffffff could not be reserved
[ 57.327237] Time: tsc clocksource has been installed.
[ 57.327245] Switched to high resolution mode on CPU 0
[ 57.327324] Switched to high resolution mode on CPU 1
[ 57.355253] PCI: Bridge: 0000:00:01.0
[ 57.355255] IO window: d000-dfff
[ 57.355259] MEM window: fa000000-fe1fffff
[ 57.355262] PREFETCH window: d0000000-dfffffff
[ 57.355266] PCI: Bridge: 0000:00:1c.0
[ 57.355267] IO window: disabled.
[ 57.355273] MEM window: disabled.
[ 57.355277] PREFETCH window: disabled.
[ 57.355283] PCI: Bridge: 0000:00:1c.3
[ 57.355285] IO window: disabled.
[ 57.355291] MEM window: fe200000-fe2fffff
[ 57.355295] PREFETCH window: disabled.
[ 57.355301] PCI: Bridge: 0000:00:1c.4
[ 57.355303] IO window: disabled.
[ 57.355309] MEM window: disabled.
[ 57.355313] PREFETCH window: disabled.
[ 57.355326] PCI: Bus 6, cardbus bridge: 0000:05:04.0
[ 57.355328] IO window: 0000e000-0000e0ff
[ 57.355333] IO window: 0000e400-0000e4ff
[ 57.355338] PREFETCH window: 50000000-53ffffff
[ 57.355344] MEM window: 54000000-57ffffff
[ 57.355349] PCI: Bridge: 0000:00:1e.0
[ 57.355352] IO window: e000-efff
[ 57.355358] MEM window: fe300000-febfffff
[ 57.355363] PREFETCH window: f7000000-f8ffffff
[ 57.355378] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 57.355383] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 57.355407] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 57.355413] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 57.355438] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17
[ 57.355444] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 57.355467] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 57.355473] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 57.355488] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 57.355507] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 22 (level, low) -> IRQ 18
[ 57.355520] NET: Registered protocol family 2
[ 57.403187] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 57.403241] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 57.403894] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 57.404125] TCP: Hash tables configured (established 131072 bind 65536)
[ 57.404128] TCP reno registered
[ 57.419302] checking if image is initramfs... it is
[ 58.022789] Freeing initrd memory: 7053k freed
[ 58.023347] audit: initializing netlink socket (disabled)
[ 58.023362] audit(1199377725.128:1): initialized
[ 58.023452] highmem bounce pool size: 64 pages
[ 58.025185] VFS: Disk quotas dquot_6.5.1
[ 58.025231] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 58.025316] io scheduler noop registered
[ 58.025318] io scheduler anticipatory registered
[ 58.025320] io scheduler deadline registered
[ 58.025332] io scheduler cfq registered (default)
[ 58.025462] Boot video device is 0000:01:00.0
[ 58.025540] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 58.025577] assign_interrupt_mode Found MSI capability
[ 58.025579] Allocate Port Service[0000:00:01.0:pcie00]
[ 58.025611] Allocate Port Service[0000:00:01.0:pcie02]
[ 58.025686] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 58.025747] assign_interrupt_mode Found MSI capability
[ 58.025749] Allocate Port Service[0000:00:1c.0:pcie00]
[ 58.025777] Allocate Port Service[0000:00:1c.0:pcie02]
[ 58.025878] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 58.025939] assign_interrupt_mode Found MSI capability
[ 58.025941] Allocate Port Service[0000:00:1c.3:pcie00]
[ 58.025969] Allocate Port Service[0000:00:1c.3:pcie02]
[ 58.026069] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 58.026130] assign_interrupt_mode Found MSI capability
[ 58.026132] Allocate Port Service[0000:00:1c.4:pcie00]
[ 58.026160] Allocate Port Service[0000:00:1c.4:pcie02]
[ 58.026318] isapnp: Scanning for PnP cards...
[ 58.381016] isapnp: No Plug & Play device found
[ 58.399845] Real Time Clock Driver v1.12ac
[ 58.400015] hpet_resources: 0xfed00000 is busy
[ 58.400052] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 58.401060] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 58.401259] input: Macintosh mouse button emulation as /class/input/input0
[ 58.401334] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 58.401849] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 58.401924] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 58.401928] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 58.401931] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 58.401933] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 58.401935] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 58.402090] mice: PS/2 mouse device common for all mice
[ 58.402269] EISA: Probing bus 0 at eisa.0
[ 58.402308] EISA: Detected 0 cards.
[ 58.402387] TCP cubic registered
[ 58.402399] NET: Registered protocol family 1
[ 58.402419] Using IPI No-Shortcut mode
[ 58.402588] Magic number: 8:814:488
[ 58.402881] Freeing unused kernel memory: 364k freed
[ 58.410703] input: AT Translated Set 2 keyboard as /class/input/input1
[ 59.589307] AppArmor: AppArmor initialized<5>audit(1199377726.628:2): type=1505 info="AppArmor initialized" pid=1243
[ 59.595350] fuse init (API version 7.8)
[ 59.602763] Failure registering capabilities with primary security module.
[ 59.797546] ACPI: SSDT 3FFBE190, 0255 (r1 PmRef Cpu0Ist 3000 INTL 20051117)
[ 59.797731] ACPI: SSDT 3FFBE480, 04B6 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
[ 59.801924] Monitor-Mwait will be used to enter C-1 state
[ 59.801927] Monitor-Mwait will be used to enter C-2 state
[ 59.801930] Monitor-Mwait will be used to enter C-3 state
[ 59.801935] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 59.802143] ACPI: SSDT 3FFBE0C0, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20051117)
[ 59.802314] ACPI: SSDT 3FFBE3F0, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20051117)
[ 59.802591] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 59.804574] ACPI: Thermal Zone [THRM] (49 C)
[ 3.156000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.160000] Time: hpet clocksource has been installed.
[ 3.572000] usbcore: registered new interface driver usbfs
[ 3.572000] usbcore: registered new interface driver hub
[ 3.572000] usbcore: registered new device driver usb
[ 3.576000] USB Universal Host Controller Interface driver v3.0
[ 3.576000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 3.576000] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 3.576000] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.576000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.576000] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000cc00
[ 3.576000] usb usb1: configuration #1 chosen from 1 choice
[ 3.576000] hub 1-0:1.0: USB hub found
[ 3.576000] hub 1-0:1.0: 2 ports detected
[ 3.592000] SCSI subsystem initialized
[ 3.636000] libata version 2.21 loaded.
[ 3.680000] ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 19
[ 3.680000] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 3.680000] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.680000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 3.680000] uhci_hcd 0000:00:1a.1: irq 19, io base 0x0000c880
[ 3.680000] usb usb2: configuration #1 chosen from 1 choice
[ 3.680000] hub 2-0:1.0: USB hub found
[ 3.680000] hub 2-0:1.0: 2 ports detected
[ 3.784000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 3.784000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.784000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.784000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 3.784000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000c800
[ 3.784000] usb usb3: configuration #1 chosen from 1 choice
[ 3.784000] hub 3-0:1.0: USB hub found
[ 3.784000] hub 3-0:1.0: 2 ports detected
[ 3.888000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 17
[ 3.888000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.888000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.888000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 3.888000] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000c480
[ 3.888000] usb usb4: configuration #1 chosen from 1 choice
[ 3.888000] hub 4-0:1.0: USB hub found
[ 3.888000] hub 4-0:1.0: 2 ports detected
[ 3.992000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
[ 3.992000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.992000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.992000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 3.992000] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000c400
[ 3.992000] usb usb5: configuration #1 chosen from 1 choice
[ 3.992000] hub 5-0:1.0: USB hub found
[ 3.992000] hub 5-0:1.0: 2 ports detected
[ 4.000000] Clocksource tsc unstable (delta = -254611924 ns)
[ 4.096000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 21
[ 4.096000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 4.096000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.096000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 4.096000] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.096000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 4.096000] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xf9fffc00
[ 4.100000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.100000] usb usb6: configuration #1 chosen from 1 choice
[ 4.100000] hub 6-0:1.0: USB hub found
[ 4.100000] hub 6-0:1.0: 4 ports detected
[ 4.204000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 4.204000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4.204000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.204000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 4.204000] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.204000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 4.204000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf9fff800
[ 4.232000] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 4.232000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.232000] usb usb7: configuration #1 chosen from 1 choice
[ 4.232000] hub 7-0:1.0: USB hub found
[ 4.232000] hub 7-0:1.0: 6 ports detected
[ 4.336000] ACPI: PCI Interrupt 0000:05:04.4[A] -> GSI 22 (level, low) -> IRQ 18
[ 4.384000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fe3fd000-fe3fd7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 4.388000] ata_piix 0000:00:1f.2: version 2.11
[ 4.388000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 4.544000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 18 (level, low) -> IRQ 21
[ 4.544000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.544000] scsi0 : ata_piix
[ 4.544000] scsi1 : ata_piix
[ 4.544000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[ 4.544000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[ 4.756000] ata1.00: ATA-8: WDC WD1200BEVS-22UST0, 01.01A01, max UDMA/133
[ 4.756000] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.772000] ata1.00: configured for UDMA/133
[ 4.804000] usb 4-2: new low speed USB device using uhci_hcd and address 3
[ 5.008000] usb 4-2: configuration #1 chosen from 1 choice
[ 5.024000] usbcore: registered new interface driver hiddev
[ 5.056000] input: HID 1241:1177 as /class/input/input2
[ 5.056000] input: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:00:1d.1-2
[ 5.056000] usbcore: registered new interface driver usbhid
[ 5.056000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 5.116000] ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WA03, max UDMA/33
[ 5.288000] ata2.01: configured for UDMA/33
[ 5.288000] scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-2 01.0 PQ: 0 ANSI: 5
[ 5.292000] scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WA03 PQ: 0 ANSI: 5
[ 5.296000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 5.296000] sd 0:0:0:0: [sda] Write Protect is off
[ 5.296000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.296000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.296000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 5.296000] sd 0:0:0:0: [sda] Write Protect is off
[ 5.296000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.296000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.296000] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 5.404000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.408000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.408000] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 5.424000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.424000] Uniform CD-ROM driver Revision: 3.20
[ 5.424000] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 5.660000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00dc1000fcca1d01]
[ 5.832000] Attempting manual resume
[ 5.832000] swsusp: Resume From Partition 8:7
[ 5.832000] PM: Checking swsusp image.
[ 5.832000] PM: Resume from disk failed.
[ 5.872000] kjournald starting. Commit interval 5 seconds
[ 5.872000] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.352000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.356000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.532000] input: PC Speaker as /class/input/input3
[ 11.632000] Linux agpgart interface v0.102 (c) Dave Jones
[ 11.716000] nvidia: module license 'NVIDIA' taints kernel.
[ 11.972000] Yenta: CardBus bridge found at 0000:05:04.0 [1462:3fe9]
[ 11.972000] Yenta O2: res at 0x94/0xD4: 00/ea
[ 11.972000] Yenta O2: enabling read prefetch/write burst
[ 12.084000] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[ 12.116000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 12.124000] sdhci: Secure Digital Host Controller Interface driver
[ 12.124000] sdhci: Copyright(c) Pierre Ossman
[ 12.136000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 18
[ 12.136000] Socket status: 30000006
[ 12.136000] Yenta: Raising subordinate bus# of parent bus (#05) from #06 to #09
[ 12.136000] pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
[ 12.136000] cs: IO port probe 0xe000-0xefff: clean.
[ 12.136000] pcmcia: parent PCI bridge Memory window: 0xfe300000 - 0xfebfffff
[ 12.136000] pcmcia: parent PCI bridge Memory window: 0xf7000000 - 0xf8ffffff
[ 12.136000] sdhci: SDHCI controller found at 0000:05:04.2 [1217:7120] (rev 2)
[ 12.136000] ACPI: PCI Interrupt 0000:05:04.2[A] -> GSI 22 (level, low) -> IRQ 18
[ 12.136000] sdhci:slot0: Unknown controller version (2). You may experience problems.
[ 12.136000] mmc0: SDHCI at 0xfe3ffc00 irq 18 DMA
[ 12.136000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 12.136000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 12.136000] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
[ 12.160000] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.0
[ 12.160000] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[ 12.160000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 17
[ 12.160000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 12.160000] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[ 12.444000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 19
[ 12.444000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 12.496000] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 12.496000] wmaster0: Selected rate control algorithm 'iwl-4965-rs'
[ 12.600000] cs: IO port probe 0x100-0x3af: clean.
[ 12.604000] cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x41f 0x4d0-0x4d7
[ 12.604000] cs: IO port probe 0x820-0x8ff: excluding 0x830-0x87f
[ 12.604000] cs: IO port probe 0xc00-0xcf7: clean.
[ 12.604000] cs: IO port probe 0xa00-0xaff: clean.
[ 12.656000] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 13.460000] si3054: cannot initialize. EXT MID = 0000
[ 13.632000] lp: driver loaded but no devices found
[ 13.700000] Adding 1060248k swap on /dev/sda7. Priority:-1 extents:1 across:1060248k
[ 14.136000] EXT3 FS on sda5, internal journal
[ 14.908000] kjournald starting. Commit interval 5 seconds
[ 14.908000] EXT3 FS on sda6, internal journal
[ 14.908000] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.952000] No dock devices found.
[ 15.992000] input: Power Button (FF) as /class/input/input5
[ 15.992000] ACPI: Power Button (FF) [PWRF]
[ 15.992000] input: Lid Switch as /class/input/input6
[ 15.992000] ACPI: Lid Switch [LID0]
[ 15.992000] input: Power Button (CM) as /class/input/input7
[ 15.992000] ACPI: Power Button (CM) [PWRB]
[ 16.108000] ACPI: Battery Slot [BAT1] (battery absent)
[ 16.140000] ACPI: Video Device [NVGA] (multi-head: yes rom: no post: no)
[ 16.164000] ACPI: AC Adapter [ADP1] (on-line)
[ 18.308000] ppdev: user-space parallel port driver
[ 18.444000] audit(1199374142.638:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5105 profile="/usr/sbin/cupsd"
[ 18.576000] apm: BIOS not found.
[ 20.616000] Failure registering capabilities with primary security module.
[ 20.852000] Bluetooth: Core ver 2.11
[ 20.852000] NET: Registered protocol family 31
[ 20.852000] Bluetooth: HCI device and connection manager initialized
[ 20.852000] Bluetooth: HCI socket layer initialized
[ 20.864000] Bluetooth: L2CAP ver 2.8
[ 20.864000] Bluetooth: L2CAP socket layer initialized
[ 20.932000] Bluetooth: RFCOMM socket layer initialized
[ 20.932000] Bluetooth: RFCOMM TTY layer initialized
[ 20.932000] Bluetooth: RFCOMM ver 1.8
[ 22.928000] ata1.00: configured for UDMA/133
[ 22.928000] ata1: EH complete
[ 22.928000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 22.928000] sd 0:0:0:0: [sda] Write Protect is off
[ 22.928000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.928000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.552000] NET: Registered protocol family 17
[ 24.696000] wlan0: Initial auth_alg=0
[ 24.696000] wlan0: authenticate with AP c2:64:e6:fb:a4:00
[ 24.696000] wlan0: RX authentication from c2:64:e6:fb:a4:00 (alg=0 transaction=2 status=0)
[ 24.696000] wlan0: authenticated
[ 24.696000] wlan0: associate with AP c2:64:e6:fb:a4:00
[ 24.700000] wlan0: RX AssocResp from c2:64:e6:fb:a4:00 (capab=0x411 status=0 aid=1)
[ 24.700000] wlan0: associated
[ 25.052000] wlan0: RX WEP frame with unknown keyidx 0 (A1=00:13:e8:24:af:bb A2=c2:64:e6:fb:a4:00 A3=c2:64:e6:fb:a4:00)
[ 72.156000] NET: Registered protocol family 10
[ 72.156000] lo: Disabled Privacy Extensions
[ 82.380000] wlan0: no IPv6 routers presentrien du tout dans /var/log/message
c'est pas un souci que le lsusb donne rien ?? c'est juste un probleme de drivers tu crois??
- L'avenir appartient à ceux qui rêvent trop -
Hors ligne
#12 Le 06/01/2008, à 14:39
- Kanor
Re : [RESOLU]webcam non reconnue dans le LSUSB
Salut
Est ce que tu peux brancher ta webcam sur les différent port usb et sur un autre ordi ??
Hors ligne
#13 Le 06/01/2008, à 14:49
- K -Lune noire
Re : [RESOLU]webcam non reconnue dans le LSUSB
salut c'est une webcam integrée je peux pas la debranchée , c'est pour ca que c'est bizarre que elle ne soit pas detectée par lsusb....
- L'avenir appartient à ceux qui rêvent trop -
Hors ligne
#14 Le 06/01/2008, à 14:53
- Kanor
Re : [RESOLU]webcam non reconnue dans le LSUSB
Elle a déja marché avec windows ils ont peut étre oublié de la monter ....
Hors ligne
#15 Le 06/01/2008, à 15:07
- K -Lune noire
Re : [RESOLU]webcam non reconnue dans le LSUSB
J'ai que Ubuntu sur ce pc , je sais pas si elle marche sous Vista... J'espere pas qu'il l'ont pas oublié 
bon vu de pres elle a l'air la
- L'avenir appartient à ceux qui rêvent trop -
Hors ligne
#16 Le 09/01/2008, à 01:04
- K -Lune noire
Re : [RESOLU]webcam non reconnue dans le LSUSB
ahahaha finalement il fallait appuyer sur un bouton nommé "P1" pour l'activer
maintenant mon lsusb donne
Bus 007 Device 002: ID 0c45:62c0 Microdia
Bus 007 Device 001: ID 0000:0000
Bus 006 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
bon a la recherche du drivers microdia
EDIT : en fait amsn detecte lacam je met le post en resolu
Dernière modification par K -Lune noire (Le 09/01/2008, à 01:19)
- L'avenir appartient à ceux qui rêvent trop -
Hors ligne