Pages : 1
#1 Le 13/08/2015, à 15:02
- damsbou
[Résolu] soucis d'amorçage / démarrage
Bonjour a tous,
J'utilise Ubuntu depuis déjà pas mal de temps, Xubuntu pour être exact, dont je suis entièrement satisfait.
Mais voilà qu'aujourd'hui il me pose un petit problème, je vais essayer de faire court.
Je suis sur un portable HP pavilion g6 (1342sf) sur lequel le HDD m'a laché il y a un moment déjà, que j'ai remplacer par un SSD (samsung 840evo), la distribution fonctionnais très bien.
Il y a quelques jours je me décide a refaire une installation toute propre, donc formatage du SSD et re-installation complète, tout se passe bien mais, oui il y a un mais, lors du reboot après quelques secondes écran noir (éteint) et rien d'autre ne se passe...pas le moindre signe de chargement.
La seule solution que j'ai trouver pour l'instant est d’accéder au menu de boot et de forcer le démarrage sur le DD ce qui m'amène au Grub dans lequel je peut ensuite valider le lancement d'ubuntu...
J'ai eu beau chercher avant de poster ici mais j'ai pas vraiment trouver de solution..
voici un boot-repair.info : http://paste.ubuntu.com/12070398/
si cela peut aider a trouver l’éventuel problème...
le retour d'un dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-25-generic (buildd@lgw01-20) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #26~14.04.1-Ubuntu SMP Fri Jul 24 21:16:20 UTC 2015 (Ubuntu 3.19.0-25.26~14.04.1-generic 3.19.8-ckt2)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-25-generic root=UUID=c5bfc282-1fea-40d3-b56b-e51477deac06 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] tseg: 00cfc00000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf9befff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf9bf000-0x00000000cfabefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cfabf000-0x00000000cfbbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfbbf000-0x00000000cfbf4fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfbf5000-0x00000000cfbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfc00000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000010effffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000010f000000-0x000000012effffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion g6 Notebook PC/3567, BIOS F.44 12/13/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x10f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 00CFBBD000 mask FFFFFFF000 uncachable
[ 0.000000] 4 base 00FFE00000 mask FFFFE00000 write-protect
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000012f000000 aka 4848M
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: last_pfn = 0xcfc00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x10ee00000-0x10effffff]
[ 0.000000] [mem 0x10ee00000-0x10effffff] page 2M
[ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x10edfffff]
[ 0.000000] [mem 0x100000000-0x10edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0xc0000000-0xcf9befff]
[ 0.000000] [mem 0xc0000000-0xcf7fffff] page 2M
[ 0.000000] [mem 0xcf800000-0xcf9befff] page 4k
[ 0.000000] BRK [0x01fd8000, 0x01fd8fff] PGTABLE
[ 0.000000] BRK [0x01fd9000, 0x01fd9fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xcfbf5000-0xcfbfffff]
[ 0.000000] [mem 0xcfbf5000-0xcfbfffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xa0000000-0xbfffffff]
[ 0.000000] [mem 0xa0000000-0xbfffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x9fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x35a2c000-0x36d0dfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x00000000CFBF4120 00007C (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 0x00000000CFBF3000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x00000000CFBDF000 00FD9F (v01 HP INSYDE F0000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x00000000CFB76000 000040
[ 0.000000] ACPI: HPET 0x00000000CFBF2000 000038 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x00000000CFBF1000 000084 (v02 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x00000000CFBF0000 00003C (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x00000000CFBEF000 0000A5 (v32 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x00000000CFBDE000 000028 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: SLIC 0x00000000CFBDD000 000176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDRT 0x00000000CFBDC000 000047 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDAT 0x00000000CFBDB000 0001AC (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x00000000CFBDA000 000726 (v01 HP INSYDE 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000CFBD8000 00193D (v02 HP INSYDE 00000001 MSFT 04000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000010effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x10effa000-0x10effefff]
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88010ae00000-ffff88010e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x10effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xcf9befff]
[ 0.000000] node 0: [mem 0xcfbf5000-0xcfbfffff]
[ 0.000000] node 0: [mem 0x100000000-0x10effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x10effffff]
[ 0.000000] On node 0 totalpages: 911720
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13224 pages used for memmap
[ 0.000000] DMA32 zone: 846282 pages, LIFO batch:31
[ 0.000000] Normal zone: 960 pages used for memmap
[ 0.000000] Normal zone: 61440 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf9bf000-0xcfabefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfabf000-0xcfbbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfbbf000-0xcfbf4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfc00000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88010ec00000 s86144 r8192 d32640 u524288
[ 0.000000] pcpu-alloc: s86144 r8192 d32640 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 897451
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-25-generic root=UUID=c5bfc282-1fea-40d3-b56b-e51477deac06 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3487064K/3646880K available (7918K kernel code, 1172K rwdata, 3752K rodata, 1408K init, 1292K bss, 159816K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:456 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1796.750 MHz processor
[ 0.000050] Calibrating delay loop (skipped), value calculated using timer frequency.. 3593.50 BogoMIPS (lpj=7187000)
[ 0.000055] pid_max: default: 32768 minimum: 301
[ 0.000065] ACPI: Core revision 20141107
[ 0.013267] ACPI: All ACPI Tables successfully acquired
[ 0.020986] Security Framework initialized
[ 0.021007] AppArmor: AppArmor initialized
[ 0.021009] Yama: becoming mindful.
[ 0.021448] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.022806] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.023437] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.023446] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.023762] Initializing cgroup subsys memory
[ 0.023771] Initializing cgroup subsys devices
[ 0.023776] Initializing cgroup subsys freezer
[ 0.023779] Initializing cgroup subsys net_cls
[ 0.023783] Initializing cgroup subsys blkio
[ 0.023786] Initializing cgroup subsys perf_event
[ 0.023789] Initializing cgroup subsys net_prio
[ 0.023792] Initializing cgroup subsys hugetlb
[ 0.023821] CPU: Physical Processor ID: 0
[ 0.023823] CPU: Processor Core ID: 0
[ 0.023826] mce: CPU supports 6 MCE banks
[ 0.023837] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.023837] Last level dTLB entries: 4KB 1024, 2MB 128, 4MB 64, 1GB 0
[ 0.024002] Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
[ 0.025970] ftrace: allocating 29988 entries in 118 pages
[ 0.049019] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088715] smpboot: CPU0: AMD E2-3000M APU with Radeon(tm) HD Graphics (fam: 12, model: 01, stepping: 00)
[ 0.196554] Performance Events: AMD PMU driver.
[ 0.196559] ... version: 0
[ 0.196561] ... bit width: 48
[ 0.196563] ... generic registers: 4
[ 0.196564] ... value mask: 0000ffffffffffff
[ 0.196566] ... max period: 00007fffffffffff
[ 0.196567] ... fixed-purpose events: 0
[ 0.196568] ... event mask: 000000000000000f
[ 0.197586] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.197726] x86: Booting SMP configuration:
[ 0.197729] .... node #0, CPUs: #1
[ 0.210873] x86: Booted up 1 node, 2 CPUs
[ 0.210875] smpboot: Total of 2 processors activated (7187.00 BogoMIPS)
[ 0.211570] devtmpfs: initialized
[ 0.217573] evm: security.selinux
[ 0.217575] evm: security.SMACK64
[ 0.217576] evm: security.SMACK64EXEC
[ 0.217578] evm: security.SMACK64TRANSMUTE
[ 0.217579] evm: security.SMACK64MMAP
[ 0.217580] evm: security.ima
[ 0.217582] evm: security.capability
[ 0.217671] PM: Registering ACPI NVS region [mem 0xcfabf000-0xcfbbefff] (1048576 bytes)
[ 0.217932] pinctrl core: initialized pinctrl subsystem
[ 0.218138] RTC time: 11:00:49, date: 08/13/15
[ 0.218315] NET: Registered protocol family 16
[ 0.224849] cpuidle: using governor ladder
[ 0.231203] cpuidle: using governor menu
[ 0.231465] ACPI: bus type PCI registered
[ 0.231468] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.231657] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.231661] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.231802] PCI: Using configuration type 1 for base access
[ 0.232013] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.232015] mtrr: probably your BIOS does not setup all CPUs.
[ 0.232016] mtrr: corrected configuration.
[ 0.237825] ACPI: Added _OSI(Module Device)
[ 0.237829] ACPI: Added _OSI(Processor Device)
[ 0.237832] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.237834] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.241852] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.246034] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.252481] ACPI: Interpreter enabled
[ 0.252495] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.252502] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.252527] ACPI: (supports S0 S3 S4 S5)
[ 0.252529] ACPI: Using IOAPIC for interrupt routing
[ 0.252762] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.672179] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.672188] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.672314] acpi PNP0A08:00: _OSC: platform does not support [PME]
[ 0.672452] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
[ 0.672588] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
[ 0.672594] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.672877] PCI host bridge to bus 0000:00
[ 0.672881] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.672884] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.672887] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.672889] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.672892] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.672894] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.672897] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.672899] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.672902] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.672904] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.672907] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.672909] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.672912] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.672914] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.672917] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.672919] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
[ 0.672922] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
[ 0.672924] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
[ 0.672934] pci 0000:00:00.0: [1022:1705] type 00 class 0x060000
[ 0.673058] pci 0000:00:01.0: [1002:9643] type 00 class 0x030000
[ 0.673071] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.673079] pci 0000:00:01.0: reg 0x14: [io 0x5000-0x50ff]
[ 0.673087] pci 0000:00:01.0: reg 0x18: [mem 0xf0400000-0xf043ffff]
[ 0.673140] pci 0000:00:01.0: supports D1 D2
[ 0.673232] pci 0000:00:01.1: [1002:1714] type 00 class 0x040300
[ 0.673244] pci 0000:00:01.1: reg 0x10: [mem 0xf0444000-0xf0447fff]
[ 0.673306] pci 0000:00:01.1: supports D1 D2
[ 0.673396] pci 0000:00:02.0: [1022:1707] type 01 class 0x060400
[ 0.673465] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.673520] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.673621] pci 0000:00:04.0: [1022:1709] type 01 class 0x060400
[ 0.673689] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.673742] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.673796] pci 0000:00:05.0: [1022:170a] type 01 class 0x060400
[ 0.673863] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.673917] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.673970] pci 0000:00:06.0: [1022:170b] type 01 class 0x060400
[ 0.674037] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.674090] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.674207] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
[ 0.674230] pci 0000:00:11.0: reg 0x10: [io 0x5118-0x511f]
[ 0.674242] pci 0000:00:11.0: reg 0x14: [io 0x5124-0x5127]
[ 0.674253] pci 0000:00:11.0: reg 0x18: [io 0x5110-0x5117]
[ 0.674264] pci 0000:00:11.0: reg 0x1c: [io 0x5120-0x5123]
[ 0.674276] pci 0000:00:11.0: reg 0x20: [io 0x5100-0x510f]
[ 0.674287] pci 0000:00:11.0: reg 0x24: [mem 0xf044e000-0xf044e7ff]
[ 0.674479] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.674496] pci 0000:00:12.0: reg 0x10: [mem 0xf044d000-0xf044dfff]
[ 0.674606] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.674714] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.674953] pci 0000:00:12.2: reg 0x10: [mem 0xf044c000-0xf044c0ff]
[ 0.676121] pci 0000:00:12.2: supports D1 D2
[ 0.676124] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.676177] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.676241] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.676257] pci 0000:00:13.0: reg 0x10: [mem 0xf044b000-0xf044bfff]
[ 0.676369] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.676472] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.676671] pci 0000:00:13.2: reg 0x10: [mem 0xf044a000-0xf044a0ff]
[ 0.677829] pci 0000:00:13.2: supports D1 D2
[ 0.677832] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.677884] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.677948] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.678158] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.678184] pci 0000:00:14.2: reg 0x10: [mem 0xf0440000-0xf0443fff 64bit]
[ 0.678265] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.678405] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.678613] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.678697] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.678800] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
[ 0.678816] pci 0000:00:16.0: reg 0x10: [mem 0xf0449000-0xf0449fff]
[ 0.678992] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
[ 0.679191] pci 0000:00:16.2: reg 0x10: [mem 0xf0448000-0xf04480ff]
[ 0.680346] pci 0000:00:16.2: supports D1 D2
[ 0.680349] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.680465] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.680575] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.680680] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.680787] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.680903] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.681006] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.681112] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.681215] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.681491] pci 0000:01:00.0: [1002:6760] type 00 class 0x030000
[ 0.681511] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.681525] pci 0000:01:00.0: reg 0x18: [mem 0xf0300000-0xf031ffff 64bit]
[ 0.681533] pci 0000:01:00.0: reg 0x20: [io 0x4000-0x40ff]
[ 0.681548] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.681603] pci 0000:01:00.0: supports D1 D2
[ 0.691135] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.691155] pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
[ 0.691165] pci 0000:00:02.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.691171] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.691310] pci 0000:02:00.0: [10ec:8176] type 00 class 0x028000
[ 0.691333] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.691362] pci 0000:02:00.0: reg 0x18: [mem 0xf0200000-0xf0203fff 64bit]
[ 0.691473] pci 0000:02:00.0: supports D1 D2
[ 0.691475] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.699139] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.699159] pci 0000:00:04.0: bridge window [io 0x3000-0x3fff]
[ 0.699167] pci 0000:00:04.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.699308] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[ 0.699328] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.699353] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.699370] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.699457] pci 0000:03:00.0: supports D1 D2
[ 0.699459] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.707139] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.707159] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
[ 0.707171] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.707313] pci 0000:04:00.0: [10ec:5209] type 00 class 0xff0000
[ 0.707334] pci 0000:04:00.0: reg 0x10: [mem 0xf0100000-0xf0100fff]
[ 0.707393] pci 0000:04:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.707461] pci 0000:04:00.0: supports D1 D2
[ 0.707464] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[ 0.715147] pci 0000:00:06.0: PCI bridge to [bus 04]
[ 0.715168] pci 0000:00:06.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.715383] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
[ 0.715394] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.715396] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.715398] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.715400] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.715402] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.715404] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.715406] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.715408] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.715410] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.715412] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.715414] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.715415] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.715417] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.715419] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.715421] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
[ 0.715423] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
[ 0.715425] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
[ 0.716368] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.716451] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.716532] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.716610] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.716675] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.716727] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.716781] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.716835] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.923832] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.923902] ACPI : EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62
[ 0.924137] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.924143] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.924154] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.924156] vgaarb: loaded
[ 0.924158] vgaarb: bridge control possible 0000:01:00.0
[ 0.924159] vgaarb: no bridge control possible 0000:00:01.0
[ 0.924455] SCSI subsystem initialized
[ 0.924581] libata version 3.00 loaded.
[ 0.924622] ACPI: bus type USB registered
[ 0.924651] usbcore: registered new interface driver usbfs
[ 0.924665] usbcore: registered new interface driver hub
[ 0.924678] usbcore: registered new device driver usb
[ 0.924992] PCI: Using ACPI for IRQ routing
[ 0.927247] PCI: pci_cache_line_size set to 64 bytes
[ 0.927343] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.927346] e820: reserve RAM buffer [mem 0xcf9bf000-0xcfffffff]
[ 0.927349] e820: reserve RAM buffer [mem 0xcfc00000-0xcfffffff]
[ 0.927351] e820: reserve RAM buffer [mem 0x10f000000-0x10fffffff]
[ 0.927536] NetLabel: Initializing
[ 0.927538] NetLabel: domain hash size = 128
[ 0.927539] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.927555] NetLabel: unlabeled traffic allowed by default
[ 0.927757] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.927764] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.929874] Switched to clocksource hpet
[ 0.938298] AppArmor: AppArmor Filesystem Enabled
[ 0.938403] pnp: PnP ACPI init
[ 0.938608] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.938612] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.938615] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.938619] system 00:00: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.938621] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.938626] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.938928] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.938996] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.939046] pnp 00:03: Plug and Play ACPI device, IDs SYN1e42 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.939128] system 00:04: [io 0x0400-0x04cf] could not be reserved
[ 0.939132] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.939135] system 00:04: [io 0x04d6] has been reserved
[ 0.939138] system 00:04: [io 0x0680-0x06ff] has been reserved
[ 0.939141] system 00:04: [io 0x077a] has been reserved
[ 0.939144] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.939147] system 00:04: [io 0x0c14] has been reserved
[ 0.939150] system 00:04: [io 0x0c50-0x0c52] has been reserved
[ 0.939152] system 00:04: [io 0x0c6c] has been reserved
[ 0.939155] system 00:04: [io 0x0c6f] has been reserved
[ 0.939158] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
[ 0.939161] system 00:04: [io 0x0840-0x0847] has been reserved
[ 0.939164] system 00:04: [io 0x0380-0x0387] has been reserved
[ 0.939168] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.939261] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.939265] system 00:05: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.939268] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.142643] pnp: PnP ACPI: found 6 devices
[ 1.151749] pci 0000:04:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 1.151845] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0320000-0xf033ffff pref]
[ 1.151850] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 1.151854] pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
[ 1.151859] pci 0000:00:02.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 1.151864] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.151869] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 1.151872] pci 0000:00:04.0: bridge window [io 0x3000-0x3fff]
[ 1.151877] pci 0000:00:04.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 1.151884] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 1.151887] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
[ 1.151894] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 1.151900] pci 0000:04:00.0: BAR 6: assigned [mem 0xf0110000-0xf011ffff pref]
[ 1.151903] pci 0000:00:06.0: PCI bridge to [bus 04]
[ 1.151908] pci 0000:00:06.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 1.151915] pci 0000:00:14.4: PCI bridge to [bus 05]
[ 1.151977] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.151979] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.151982] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.151985] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 1.151987] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 1.151990] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 1.151992] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 1.151995] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 1.151998] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 1.152000] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 1.152003] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 1.152005] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 1.152008] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 1.152010] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 1.152013] pci_bus 0000:00: resource 18 [mem 0xd0000000-0xf7ffffff]
[ 1.152015] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 1.152018] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[ 1.152021] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 1.152024] pci_bus 0000:01: resource 1 [mem 0xf0300000-0xf03fffff]
[ 1.152026] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.152029] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 1.152032] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff]
[ 1.152034] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 1.152037] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 1.152040] pci_bus 0000:04: resource 1 [mem 0xf0100000-0xf01fffff]
[ 1.152043] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 1.152045] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 1.152048] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.152050] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
[ 1.152053] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
[ 1.152056] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
[ 1.152058] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff]
[ 1.152061] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff]
[ 1.152063] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff]
[ 1.152066] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff]
[ 1.152068] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff]
[ 1.152071] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff]
[ 1.152073] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff]
[ 1.152076] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff]
[ 1.152078] pci_bus 0000:05: resource 18 [mem 0xd0000000-0xf7ffffff]
[ 1.152081] pci_bus 0000:05: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 1.152083] pci_bus 0000:05: resource 20 [mem 0xfed45000-0xffffffff]
[ 1.152124] NET: Registered protocol family 2
[ 1.152354] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.152489] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.152676] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.152743] TCP: reno registered
[ 1.152754] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.152793] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.152898] NET: Registered protocol family 1
[ 1.152922] pci 0000:00:01.0: Video device with shadowed ROM
[ 1.414396] PCI: CLS 64 bytes, default 64
[ 1.414473] Trying to unpack rootfs image as initramfs...
[ 1.865731] Freeing initrd memory: 19336K (ffff880035a2c000 - ffff880036d0e000)
[ 1.865745] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.865749] software IO TLB [mem 0xcb9bf000-0xcf9bf000] (64MB) mapped at [ffff8800cb9bf000-ffff8800cf9befff]
[ 1.865847] Simple Boot Flag at 0x44 set to 0x1
[ 1.866124] microcode: CPU0: patch_level=0x03000027
[ 1.866135] microcode: CPU1: patch_level=0x03000027
[ 1.866313] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.866325] LVT offset 0 assigned for vector 0x400
[ 1.866396] perf: AMD IBS detected (0x000000ff)
[ 1.866449] Scanning for low memory corruption every 60 seconds
[ 1.867071] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.867097] Initialise system trusted keyring
[ 1.867126] audit: initializing netlink subsys (disabled)
[ 1.867149] audit: type=2000 audit(1439463650.752:1): initialized
[ 1.867838] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.869941] zpool: loaded
[ 1.869944] zbud: loaded
[ 1.870354] VFS: Disk quotas dquot_6.5.2
[ 1.870426] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.871318] fuse init (API version 7.23)
[ 1.871625] Key type big_key registered
[ 1.872270] Key type asymmetric registered
[ 1.872278] Asymmetric key parser 'x509' registered
[ 1.872366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.872454] io scheduler noop registered
[ 1.872459] io scheduler deadline registered (default)
[ 1.872507] io scheduler cfq registered
[ 1.873275] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.873339] pciehp 0000:00:02.0:pcie04: Slot #2 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 1.873413] pciehp 0000:00:02.0:pcie04: service driver pciehp loaded
[ 1.873420] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.982765] ACPI: AC Adapter [ACAD] (on-line)
[ 1.982892] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.982896] ACPI: Power Button [PWRB]
[ 1.982964] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.983520] ACPI: Lid Switch [LID]
[ 1.983602] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.983605] ACPI: Power Button [PWRF]
[ 1.983839] ACPI: acpi_idle registered with cpuidle
[ 1.984884] [Firmware Bug]: Invalid critical threshold (0)
[ 1.986936] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.986941] ACPI: Thermal Zone [THRM] (53 C)
[ 1.987006] GHES: HEST is not enabled!
[ 1.987178] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.990664] Linux agpgart interface v0.103
[ 1.993451] brd: module loaded
[ 1.994853] loop: module loaded
[ 1.995179] libphy: Fixed MDIO Bus: probed
[ 1.995184] tun: Universal TUN/TAP device driver, 1.6
[ 1.995186] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.995337] PPP generic driver version 2.4.2
[ 1.995506] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.995515] ehci-pci: EHCI PCI platform driver
[ 1.995779] QUIRK: Enable AMD PLL fix
[ 1.995814] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.995822] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.995828] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.995841] ehci-pci 0000:00:12.2: debug port 1
[ 1.995893] ehci-pci 0000:00:12.2: irq 17, io mem 0xf044c000
[ 2.006274] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.006374] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.006377] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.006379] usb usb1: Product: EHCI Host Controller
[ 2.006381] usb usb1: Manufacturer: Linux 3.19.0-25-generic ehci_hcd
[ 2.006383] usb usb1: SerialNumber: 0000:00:12.2
[ 2.006749] hub 1-0:1.0: USB hub found
[ 2.006761] hub 1-0:1.0: 5 ports detected
[ 2.007204] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.007211] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.007215] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.007228] ehci-pci 0000:00:13.2: debug port 1
[ 2.007261] ehci-pci 0000:00:13.2: irq 17, io mem 0xf044a000
[ 2.018278] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.018355] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.018357] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.018360] usb usb2: Product: EHCI Host Controller
[ 2.018361] usb usb2: Manufacturer: Linux 3.19.0-25-generic ehci_hcd
[ 2.018363] usb usb2: SerialNumber: 0000:00:13.2
[ 2.018725] hub 2-0:1.0: USB hub found
[ 2.018734] hub 2-0:1.0: 5 ports detected
[ 2.019160] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 2.019166] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 2.019170] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.019182] ehci-pci 0000:00:16.2: debug port 1
[ 2.019218] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0448000
[ 2.030279] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.030363] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.030366] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.030368] usb usb3: Product: EHCI Host Controller
[ 2.030370] usb usb3: Manufacturer: Linux 3.19.0-25-generic ehci_hcd
[ 2.030371] usb usb3: SerialNumber: 0000:00:16.2
[ 2.030731] hub 3-0:1.0: USB hub found
[ 2.030740] hub 3-0:1.0: 4 ports detected
[ 2.030977] ehci-platform: EHCI generic platform driver
[ 2.030995] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.031007] ohci-pci: OHCI PCI platform driver
[ 2.031239] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 2.031246] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 2.031283] ohci-pci 0000:00:12.0: irq 18, io mem 0xf044d000
[ 2.090346] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.090352] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.090355] usb usb4: Product: OHCI PCI host controller
[ 2.090358] usb usb4: Manufacturer: Linux 3.19.0-25-generic ohci_hcd
[ 2.090360] usb usb4: SerialNumber: 0000:00:12.0
[ 2.090776] hub 4-0:1.0: USB hub found
[ 2.090837] hub 4-0:1.0: 5 ports detected
[ 2.091230] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.091238] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.091272] ohci-pci 0000:00:13.0: irq 18, io mem 0xf044b000
[ 2.150347] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.150354] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.150357] usb usb5: Product: OHCI PCI host controller
[ 2.150359] usb usb5: Manufacturer: Linux 3.19.0-25-generic ohci_hcd
[ 2.150362] usb usb5: SerialNumber: 0000:00:13.0
[ 2.150757] hub 5-0:1.0: USB hub found
[ 2.150817] hub 5-0:1.0: 5 ports detected
[ 2.151204] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 2.151212] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6
[ 2.151247] ohci-pci 0000:00:16.0: irq 18, io mem 0xf0449000
[ 2.199807] ACPI: Battery Slot [BAT0] (battery present)
[ 2.210226] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.210232] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.210236] usb usb6: Product: OHCI PCI host controller
[ 2.210238] usb usb6: Manufacturer: Linux 3.19.0-25-generic ohci_hcd
[ 2.210240] usb usb6: SerialNumber: 0000:00:16.0
[ 2.210608] hub 6-0:1.0: USB hub found
[ 2.210668] hub 6-0:1.0: 4 ports detected
[ 2.210893] ohci-platform: OHCI generic platform driver
[ 2.210914] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.211057] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.229421] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.229428] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.229925] mousedev: PS/2 mouse device common for all mice
[ 2.230483] rtc_cmos 00:01: RTC can wake from S4
[ 2.230617] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.230649] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[ 2.230679] i2c /dev entries driver
[ 2.230777] device-mapper: uevent: version 1.0.3
[ 2.230896] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 2.230922] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.231185] PCCT header not found.
[ 2.231187] ACPI PCC probe failed.
[ 2.231369] TCP: cubic registered
[ 2.231519] NET: Registered protocol family 10
[ 2.231878] NET: Registered protocol family 17
[ 2.231892] Key type dns_resolver registered
[ 2.232431] Loading compiled-in X.509 certificates
[ 2.233986] Loaded X.509 cert 'Magrathea: Glacier signing key: 6aaa11d18c2d3a40b1b4dbe5bf8ad656ddf51838'
[ 2.234007] registered taskstats version 1
[ 2.237140] Key type trusted registered
[ 2.241597] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.242922] Key type encrypted registered
[ 2.242937] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.242943] ima: No TPM chip found, activating TPM-bypass!
[ 2.242973] evm: HMAC attrs: 0x1
[ 2.243537] Magic number: 11:116:24
[ 2.243545] misc cpu_dma_latency: hash matches
[ 2.243692] rtc_cmos 00:01: setting system clock to 2015-08-13 11:00:51 UTC (1439463651)
[ 2.243897] acpi-cpufreq: overriding BIOS provided _PSD data
[ 2.244044] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.244046] EDD information not available.
[ 2.244152] PM: Hibernation image not present or could not be loaded.
[ 2.244866] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
[ 2.244871] Write protecting the kernel read-only data: 12288k
[ 2.245296] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
[ 2.245499] Freeing unused kernel memory: 344K (ffff880001baa000 - ffff880001c00000)
[ 2.272520] systemd-udevd[104]: starting version 204
[ 2.318342] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 2.410913] ahci 0000:00:11.0: version 3.0
[ 2.411281] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 2.411286] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.411868] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 26
[ 2.411942] scsi host0: ahci
[ 2.412138] scsi host1: ahci
[ 2.412246] ata1: SATA max UDMA/133 abar m2048@0xf044e000 port 0xf044e100 irq 25
[ 2.412249] ata2: SATA max UDMA/133 abar m2048@0xf044e000 port 0xf044e180 irq 25
[ 2.420929] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.421482] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc9000478e000, 80:c1:6e:44:2c:9b, XID 00a00000 IRQ 27
[ 2.494185] usb 1-3: New USB device found, idVendor=0461, idProduct=4de7
[ 2.494198] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.494205] usb 1-3: Product: HP Webcam-101
[ 2.494210] usb 1-3: Manufacturer: HP Webcam-101
[ 2.494214] usb 1-3: SerialNumber: HP Webcam-101
[ 2.862389] tsc: Refined TSC clocksource calibration: 1796.731 MHz
[ 2.902412] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.902448] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.902858] ata1.00: supports DRM functions and may not be fully accessible
[ 2.902993] ata1.00: disabling queued TRIM support
[ 2.902999] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0DB6Q, max UDMA/133
[ 2.903003] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.903240] ata1.00: supports DRM functions and may not be fully accessible
[ 2.903313] ata1.00: disabling queued TRIM support
[ 2.903322] ata1.00: configured for UDMA/133
[ 2.903796] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5
[ 2.904310] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.904332] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.904381] sd 0:0:0:0: [sda] Write Protect is off
[ 2.904383] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.904403] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.905035] sda: sda1 sda2 sda3
[ 2.905669] ata2.00: ATAPI: hp DVD A DS8A8SH, KH61, max UDMA/100
[ 2.905705] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.912459] ata2.00: configured for UDMA/100
[ 2.928004] scsi 1:0:0:0: CD-ROM hp DVD A DS8A8SH KH61 PQ: 0 ANSI: 5
[ 2.969795] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.969809] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.970000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.970064] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.018946] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 3.018958] EXT4-fs (sda1): write access will be enabled during recovery
[ 3.044460] EXT4-fs (sda1): recovery complete
[ 3.046740] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.157049] random: init urandom read with 35 bits of entropy available
[ 3.199218] init: plymouth-upstart-bridge main process (165) terminated with status 1
[ 3.199236] init: plymouth-upstart-bridge main process ended, respawning
[ 3.214664] init: plymouth-upstart-bridge main process (175) terminated with status 1
[ 3.214714] init: plymouth-upstart-bridge main process ended, respawning
[ 3.226864] init: plymouth-upstart-bridge main process (181) terminated with status 1
[ 3.226878] init: plymouth-upstart-bridge main process ended, respawning
[ 3.264418] psmouse serio1: synaptics: queried max coordinates: x [..5634], y [..4598]
[ 3.339645] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1680, fw id: 706145
[ 3.387832] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 3.411013] Adding 4882428k swap on /dev/sda3. Priority:-1 extents:1 across:4882428k SSFS
[ 3.423688] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 3.643806] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.647735] systemd-udevd[320]: starting version 204
[ 3.791938] lp: driver loaded but no devices found
[ 3.838339] ppdev: user-space parallel port driver
[ 3.869604] Switched to clocksource tsc
[ 3.957435] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 4.122147] wmi: Mapper loaded
[ 4.130908] acpi device:00: registered as cooling_device2
[ 4.130998] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 4.131145] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 4.146378] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.167402] [drm] Initialized drm 1.1.0 20060810
[ 4.213696] Bluetooth: Core ver 2.20
[ 4.213729] NET: Registered protocol family 31
[ 4.213731] Bluetooth: HCI device and connection manager initialized
[ 4.213738] Bluetooth: HCI socket layer initialized
[ 4.213742] Bluetooth: L2CAP socket layer initialized
[ 4.213750] Bluetooth: SCO socket layer initialized
[ 4.257237] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.257243] Bluetooth: BNEP filters: protocol multicast
[ 4.257251] Bluetooth: BNEP socket layer initialized
[ 4.262229] cfg80211: Calling CRDA to update world regulatory domain
[ 4.262272] Bluetooth: RFCOMM TTY layer initialized
[ 4.262279] Bluetooth: RFCOMM socket layer initialized
[ 4.262297] Bluetooth: RFCOMM ver 1.11
[ 4.377446] acpi device:06: registered as cooling_device3
[ 4.379212] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input7
[ 4.399408] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\_SB_.PCI0.SMBS.SMB0) (20141107/utaddress-258)
[ 4.399421] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.401628] audit: type=1400 audit(1439463653.653:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=499 comm="apparmor_parser"
[ 4.401640] audit: type=1400 audit(1439463653.653:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=499 comm="apparmor_parser"
[ 4.403652] audit: type=1400 audit(1439463653.657:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=499 comm="apparmor_parser"
[ 4.458012] [drm] radeon kernel modesetting enabled.
[ 4.458039] VGA switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
[ 4.458200] media: Linux media interface: v0.10
[ 4.468838] Linux video capture interface: v2.00
[ 4.505400] audit: type=1400 audit(1439463653.757:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=520 comm="apparmor_parser"
[ 4.505415] audit: type=1400 audit(1439463653.757:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=520 comm="apparmor_parser"
[ 4.505421] audit: type=1400 audit(1439463653.757:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=520 comm="apparmor_parser"
[ 4.506118] audit: type=1400 audit(1439463653.757:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=520 comm="apparmor_parser"
[ 4.506127] audit: type=1400 audit(1439463653.757:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=520 comm="apparmor_parser"
[ 4.510821] audit: type=1400 audit(1439463653.765:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=520 comm="apparmor_parser"
[ 4.515045] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 4.515050] AMD IOMMUv2 functionality not available on this system
[ 4.521719] CRAT table not found
[ 4.521726] Finished initializing topology ret=0
[ 4.522563] kfd kfd: Initialized module
[ 4.524968] [drm] initializing kernel modesetting (SUMO2 0x1002:0x9643 0x103C:0x1663).
[ 4.524995] [drm] register mmio base: 0xF0400000
[ 4.524997] [drm] register mmio size: 262144
[ 4.525907] ATOM BIOS: HP
[ 4.526142] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 4.526184] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 4.526187] [drm] Detected VRAM RAM=512M, BAR=256M
[ 4.526189] [drm] RAM width 32bits DDR
[ 4.539294] [TTM] Zone kernel: Available graphics memory: 1754222 kiB
[ 4.539299] [TTM] Initializing pool allocator
[ 4.539312] [TTM] Initializing DMA pool allocator
[ 4.539348] [drm] radeon: 512M of VRAM memory ready
[ 4.539350] [drm] radeon: 1024M of GTT memory ready.
[ 4.539375] [drm] Loading SUMO2 Microcode
[ 4.546272] init: cups main process (512) killed by HUP signal
[ 4.546290] init: cups main process ended, respawning
[ 4.556534] [drm] Internal thermal controller without fan control
[ 4.557036] [drm] Found smc ucode version: 0x00011200
[ 4.557123] [drm] radeon: dpm initialized
[ 4.559132] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 4.601341] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 4.604992] radeon 0000:00:01.0: WB enabled
[ 4.605003] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800c8b54c00
[ 4.605007] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800c8b54c0c
[ 4.605754] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90004db2118
[ 4.607600] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.607607] [drm] Driver supports precise vblank timestamp query.
[ 4.607614] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 4.607659] radeon 0000:00:01.0: radeon: using MSI.
[ 4.607687] [drm] radeon: irq initialized.
[ 4.634953] [drm] ring test on 0 succeeded in 1 usecs
[ 4.634966] [drm] ring test on 3 succeeded in 3 usecs
[ 4.682095] [drm] ring test on 5 succeeded in 1 usecs
[ 4.693971] uvcvideo: Found UVC 1.00 device HP Webcam-101 (0461:4de7)
[ 4.702182] [drm] UVD initialized successfully.
[ 4.708963] [drm] ib test on ring 0 succeeded in 0 usecs
[ 4.709004] [drm] ib test on ring 3 succeeded in 0 usecs
[ 4.743806] input: HP Webcam-101 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input8
[ 4.743901] usbcore: registered new interface driver uvcvideo
[ 4.743903] USB Video Class driver (1.1.1)
[ 4.780068] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[ 4.818984] kvm: disabled by bios
[ 4.820784] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 4.821135] rtlwifi: rtlwifi: wireless switch is on
[ 5.137496] input: HP WMI hotkeys as /devices/virtual/input/input9
[ 5.167940] init: failsafe main process (587) killed by TERM signal
[ 5.231593] [drm] ib test on ring 5 succeeded
[ 5.248012] cfg80211: World regulatory domain updated:
[ 5.248020] cfg80211: DFS Master region: unset
[ 5.248022] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 5.248026] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5.248029] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5.248032] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5.248035] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5.248037] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5.295917] [drm] radeon atom DIG backlight initialized
[ 5.295925] [drm] Radeon Display Connectors
[ 5.295928] [drm] Connector 0:
[ 5.295930] [drm] VGA-1
[ 5.295931] [drm] HPD2
[ 5.295934] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 5.295935] [drm] Encoders:
[ 5.295937] [drm] CRT1: INTERNAL_UNIPHY2
[ 5.295938] [drm] CRT1: NUTMEG
[ 5.295939] [drm] Connector 1:
[ 5.295941] [drm] LVDS-1
[ 5.295942] [drm] HPD1
[ 5.295944] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 5.295945] [drm] Encoders:
[ 5.295947] [drm] LCD1: INTERNAL_UNIPHY2
[ 5.295948] [drm] LCD1: TRAVIS
[ 5.295949] [drm] Connector 2:
[ 5.295950] [drm] HDMI-A-1
[ 5.295952] [drm] HPD3
[ 5.295954] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 5.295955] [drm] Encoders:
[ 5.295956] [drm] DFP1: INTERNAL_UNIPHY
[ 5.584043] [drm] fb mappable at 0xD0478000
[ 5.584049] [drm] vram apper at 0xD0000000
[ 5.584051] [drm] size 4325376
[ 5.584053] [drm] fb depth is 24
[ 5.584054] [drm] pitch is 5632
[ 5.584177] fbcon: radeondrmfb (fb0) is primary device
[ 5.913893] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.920271] Console: switching to colour frame buffer device 170x48
[ 5.925381] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 5.925384] radeon 0000:00:01.0: registered panic notifier
[ 5.991261] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0
[ 5.992795] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[ 5.996030] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x103C:0x1663).
[ 5.996062] [drm] register mmio base: 0xF0300000
[ 5.996064] [drm] register mmio size: 131072
[ 5.996068] vga_switcheroo: enabled
[ 5.996732] ATPX version 1, functions 0x00000181
[ 6.010989] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
[ 6.026653] sound hdaudioC1D0: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 6.026660] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.026664] sound hdaudioC1D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 6.026666] sound hdaudioC1D0: mono: mono_out=0x0
[ 6.026668] sound hdaudioC1D0: inputs:
[ 6.026672] sound hdaudioC1D0: Internal Mic=0x11
[ 6.026675] sound hdaudioC1D0: Mic=0xc
[ 6.060644] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 6.060917] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 6.117447] r8169 0000:03:00.0 eth0: link down
[ 6.117467] r8169 0000:03:00.0 eth0: link down
[ 6.117515] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.333266] init: alsa-restore main process (863) terminated with status 99
[ 6.763037] ATOM BIOS: HP
[ 6.763551] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 6.763556] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 6.763559] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 6.763561] [drm] RAM width 64bits DDR
[ 6.763587] [drm] radeon: 1024M of VRAM memory ready
[ 6.763588] [drm] radeon: 1024M of GTT memory ready.
[ 6.763604] [drm] Loading CAICOS Microcode
[ 6.768494] [drm] Internal thermal controller with fan control
[ 6.773488] [drm] radeon: dpm initialized
[ 6.773548] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 6.778816] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 6.779254] radeon 0000:01:00.0: WB enabled
[ 6.779259] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800c1fd8c00
[ 6.779263] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800c1fd8c0c
[ 6.780817] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005fb2118
[ 6.780887] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.780889] [drm] Driver supports precise vblank timestamp query.
[ 6.780892] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 6.780941] radeon 0000:01:00.0: radeon: using MSI.
[ 6.780995] [drm] radeon: irq initialized.
[ 6.800203] [drm] ring test on 0 succeeded in 2 usecs
[ 6.800222] [drm] ring test on 3 succeeded in 7 usecs
[ 6.881405] random: nonblocking pool is initialized
[ 6.982153] [drm] ring test on 5 succeeded in 2 usecs
[ 6.982169] [drm] UVD initialized successfully.
[ 6.983044] [drm] ib test on ring 0 succeeded in 0 usecs
[ 6.983131] [drm] ib test on ring 3 succeeded in 0 usecs
[ 7.631162] [drm] ib test on ring 5 succeeded
[ 7.633866] [drm] Radeon Display Connectors
[ 7.780243] r8169 0000:03:00.0 eth0: link up
[ 7.780260] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7.863820] radeon 0000:01:00.0: No connectors reported connected with modes
[ 7.863830] [drm] Cannot find any crtc or sizes - going 1024x768
[ 7.865995] [drm] fb mappable at 0xE0475000
[ 7.865997] [drm] vram apper at 0xE0000000
[ 7.865998] [drm] size 3145728
[ 7.866000] [drm] fb depth is 24
[ 7.866001] [drm] pitch is 4096
[ 7.866516] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[ 7.975977] [drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 1
[ 8.316531] init: plymouth-upstart-bridge main process ended, respawning
[ 8.319259] init: plymouth-splash main process (1087) terminated with status 1
[ 8.365177] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 8.365185] vgaarb: device changed decodes: PCI:0000:00:01.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 34.979504] audit_printk_skb: 108 callbacks suppressed
[ 34.979511] audit: type=1400 audit(1439463684.234:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2119 comm="apparmor_parser"
[ 34.979534] audit: type=1400 audit(1439463684.234:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2119 comm="apparmor_parser"
[ 34.980207] audit: type=1400 audit(1439463684.234:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2119 comm="apparmor_parser"
[ 662.419219] usb 1-1: new high-speed USB device number 3 using ehci-pci
[ 662.823081] usb 4-1: new full-speed USB device number 2 using ohci-pci
[ 662.990118] usb 4-1: not running at top speed; connect to a high speed hub
[ 663.002108] usb 4-1: New USB device found, idVendor=059b, idProduct=0470
[ 663.002122] usb 4-1: New USB device strings: Mfr=10, Product=11, SerialNumber=5
[ 663.002129] usb 4-1: Product: Storage
[ 663.002135] usb 4-1: Manufacturer: Iomega
[ 663.002139] usb 4-1: SerialNumber: 6E4A4E6FFFFF
[ 663.035554] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 663.035680] scsi host2: usb-storage 4-1:1.0
[ 663.035935] usbcore: registered new interface driver usb-storage
[ 663.046083] usbcore: registered new interface driver uas
[ 664.082616] scsi 2:0:0:0: Direct-Access ST950032 5AS PQ: 0 ANSI: 2 CCS
[ 664.083655] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 664.093336] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 664.103283] sd 2:0:0:0: [sdb] Write Protect is off
[ 664.103294] sd 2:0:0:0: [sdb] Mode Sense: 28 00 00 00
[ 664.113408] sd 2:0:0:0: [sdb] No Caching mode page found
[ 664.113424] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 664.219399] sdb: sdb1 sdb2
[ 664.496460] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1778.104219] systemd-hostnamed[5681]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 1783.398177] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 1783.418727] JFS: nTxBlock = 8192, nTxLock = 65536
[ 1783.439362] ntfs: driver 2.1.31 [Flags: R/O MODULE].
[ 1783.478596] QNX4 filesystem 0.2.3 registered.
[ 1783.564483] raid6: sse2x1 2073 MB/s
[ 1783.632463] raid6: sse2x2 3017 MB/s
[ 1783.700475] raid6: sse2x4 3491 MB/s
[ 1783.700479] raid6: using algorithm sse2x4 (3491 MB/s)
[ 1783.700482] raid6: using intx1 recovery algorithm
[ 1783.704582] xor: measuring software checksum speed
[ 1783.744476] prefetch64-sse: 4666.000 MB/sec
[ 1783.784481] generic_sse: 4259.000 MB/sec
[ 1783.784485] xor: using function: prefetch64-sse (4666.000 MB/sec)
[ 1783.824624] Btrfs loaded
[ 2147.067040] usb 4-1: USB disconnect, device number 2
[ 2163.019394] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 2163.168988] usb 2-2: New USB device found, idVendor=059b, idProduct=0470
[ 2163.169002] usb 2-2: New USB device strings: Mfr=10, Product=11, SerialNumber=5
[ 2163.169009] usb 2-2: Product: Storage
[ 2163.169015] usb 2-2: Manufacturer: Iomega
[ 2163.169020] usb 2-2: SerialNumber: 6E4A4E6FFFFF
[ 2163.171899] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 2163.172203] scsi host3: usb-storage 2-2:1.0
[ 2164.215384] scsi 3:0:0:0: Direct-Access ST950032 5AS PQ: 0 ANSI: 2 CCS
[ 2164.218821] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2164.223519] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2164.224900] sd 3:0:0:0: [sdb] Write Protect is off
[ 2164.224917] sd 3:0:0:0: [sdb] Mode Sense: 28 00 00 00
[ 2164.225993] sd 3:0:0:0: [sdb] No Caching mode page found
[ 2164.226002] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 2164.297272] sdb: sdb1 sdb2
[ 2164.345576] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2465.349400] usb 2-2: USB disconnect, device number 2J'espère avoir donner suffisamment d'information, si je peut fournir autre chose n'hésitez pas a demander.
En vous remerciant !
Dernière modification par damsbou (Le 14/08/2015, à 13:40)
Hors ligne
#2 Le 13/08/2015, à 18:59
- Babdu89
Re : [Résolu] soucis d'amorçage / démarrage
Bonjour.
J'ai beau regarder dans le boot info...
Pour moi ton Xubuntu ne peut démarrer que depuis le SSD. /dev/sda.
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub.
=> No boot loader is installed in the MBR of /dev/sdb./dev/sdb c'est ton disque dure /dev/sdb label IOMEGA . Il n'est pas bootable sur Grub, puisque on ne voit pas de fichier de boot correspondant à Grub, comme dans /dev/sda...
Ce n'est qu'un un MBR compatible Windows, qui pourrait éventuellement que démarrer un Windows.
Mais. Je n'en vois pas sur ta config. Et on ne voit pas non plus de fichier de boot correspondant à un Windows .
=> No boot loader is installed in the MBR of /dev/sdb.sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /media/dams/IOMEGA.sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, usb-disk, no-os, 63 sectors * 512 bytesTu es sûr de ce que tu dis lorsque tu déclares démarrer depuis le disque dur (/dev/sdb) ???...
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#3 Le 14/08/2015, à 00:15
- damsbou
Re : [Résolu] soucis d'amorçage / démarrage
Merci pour la réponse.
En fait /dev/sdb (IOMEGA) n'aurait pas du apparaître c'est un DD externe et je faisait des transfert de fichier lors de la création du log.
Je n'ai donc que /dev/sda et uniquement Ubuntu dessus.
Voici un nouveau log sans le DD externe : http://paste.ubuntu.com/12075074/
Donc toujours même soucis, au démarrage l'écran "clignote" plusieurs fois puis se met en veille sans démarrage du système, obliger de passer par le menu de boot et forcer le DD qui me renvoi donc au Grub (sans timer) ou je peut sélectionner et lancer Ubuntu.
Mais chose étrange, a certains démarrage il va direct sur le Grub (avec 30 sec de timer).
Est ce que re-installer le Grub avec un Boot-repair-disk pourrait être une solution?
Hors ligne
#4 Le 14/08/2015, à 00:26
- Bougron
Re : [Résolu] soucis d'amorçage / démarrage
Bonsoir.
Pour un peu, je dirais que c'est la première fois que tu utilises cette version de ubuntu qui est très récente
Operating System: Ubuntu 14.04.3 LTS . date de sortie fin Juillet
Je partirais sur le principe qu'elle déteste ton écran.
Un petit coup d'option 'nomodeset' peut-être. paragragraphe 6.2 de ce document https://doc.ubuntu-fr.org/kernel
Hors ligne
#5 Le 14/08/2015, à 13:39
- damsbou
Re : [Résolu] soucis d'amorçage / démarrage
Super et merci Bougron !
Donc un petit 'nomodeset' et je démarre a tout les coups ! 
C'est vrai que j'ai télécharger la dernière version de la LTS sans y faire plus attention,
je me renseignerai a deux fois le prochain coup
Merci Babdu89 et Bougron pour votre aide
(j'edit le sujet en "résolu")
Hors ligne
#6 Le 14/08/2015, à 13:53
- Babdu89
Re : [Résolu] soucis d'amorçage / démarrage
Bonjour.
Donc un petit 'nomodeset' et je démarre a tout les coups ! smile
Si tu veux ne plus être obligé de passer l'option "nomodeset" au démarrage.
Tu installes Boot-Repair dans ton Xubuntu (si ce n'est déjà fait) .
Tu réinstalles Grub en passant par les "Option avancées".
Dans l'onglet "Options principales " Réinstaller Grub" doit être coché.
"Faire apparaître le menu de démarrage" => 10 secondes aussi.
Dans l'onglet "Options de grub"
Tu coches "Ajouter une option au noyau" , tu choisis "nomodeset" .
Tu fais "Appliquer".
Au redémarrage sans rien faire, de spécial, tu dois avoir l'affichage du menu Grub, avec un décompte de temps de 10 secondes. Puis ton Xubuntu devrait se lancer.
Tu peux aussi faire "Entrée" pendant le décompte du temps pour charger l'Os immédiatement.
@+. Babdu89 .
Dernière modification par Babdu89 (Le 14/08/2015, à 13:55)
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#7 Le 14/08/2015, à 14:03
- damsbou
Re : [Résolu] soucis d'amorçage / démarrage
Babdu89 a écrit :
Si tu veux ne plus être obligé de passer l'option "nomodeset" au démarrage.
Tu installes Boot-Repair dans ton Xubuntu (si ce n'est déjà fait) .
Tu réinstalles Grub en passant par les "Option avancées".
Dans l'onglet "Options principales " Réinstaller Grub" doit être coché.
"Faire apparaître le menu de démarrage" => 10 secondes aussi.
Dans l'onglet "Options de grub"
Tu coches "Ajouter une option au noyau" , tu choisis "nomodeset" .
Tu fais "Appliquer".
Au redémarrage sans rien faire, de spécial, tu dois avoir l'affichage du menu Grub, avec un décompte de temps de 10 secondes. Puis ton Xubuntu devrait se lancer.
C'est ce que j'ai fait 
merci encore !
Hors ligne
#8 Le 14/08/2015, à 20:34
- Alain_Le_Bel
Re : [Résolu] soucis d'amorçage / démarrage
Toutes et Tous bonjour,
Je pense avoir le même problème, j'ai acheté un portable sans OS à LDLC, c'est donc sa marque.
J'ai installé xUbuntu, puis lisant que c'est pour des anciens ordinateurs une distribution légère, j'ai opter pour installer Ubuntu 14.04 LTS.
Je n'ai pour l'instant qu'un SSD de 115,35 Gio, l’installation complète en prenant tout le disque, je constate que le Swap se trouve en Sda5
Depuis le début où j'installe mes fichier, si je fait un redémarrage pas de problème...
Dès qu'il repose une nuit ou plus, il n'arrive pas à démarrer, écran figé impossible à rentrer le mot de passe, fermeture par le bouton marche ! 
Cette fois ci même problème mais au redémarrage qui fonctionne bien souvent la 2ème fois, là j'ai eu un écran couleur de fond de démarrage puis noir, ayant garder cette fois les fonctionnalités du clavier j'ai fait un Alt+Syst+b et là c'est reparti en arrivant directement à mon mot de passe à rentrer !
Pensez-vous que votre solution peut être mise en pratique dans mon cas ?
Merci !
Merci ! Si c'était facile... Ce ne serait pas pour nous...
Ubuntu 20.04 LTS ; Mémoire : 3,9 Gio ; Processeur : AMD Athlon(tm) II X2 265 Processor × 2 ; Carte Graphique : disparue depuis 14.04 (GeForce GTS 450 1024MB GDDR5) ; Type d'OS : 64-bit ; Disque : 233,2 Go
Je n'arrive pas à mettre de commentaires sur les forums matériel... Un portable LDLC 17 pouces
Hors ligne
#9 Le 14/08/2015, à 23:45
- Babdu89
Re : [Résolu] soucis d'amorçage / démarrage
Bonsoir.
Pensez-vous que votre solution peut être mise en pratique dans mon cas ?
Ce n'est pas forcément le même souci.
Tu peux tester provisoirement avec l'option "nomodeset" au démarrage de ton Xubuntu, sans rien changer dans ta configuration.
Tu fais ceci.
Pour faire apparaître le menu Grub au démarrage, si il ne s'affiche pas. Un appui sur la touche Échap .
Lorsque le menu Grub apparaît. Tu édites la première ligne avec la touche E .
Tu navigues jusque entre "...ro quiet splash. Entre les deux après ro, tu tapes nomodeset (clavier en qwerty la virgule pour faire le m = no,odeset).
Tu fais F10 pour lancer ta session.
Tu fais l'essai à plusieurs reprise, si çà démarre sans souci. Tu peux fixer la manip comme expliqué post#6 .
Mais j'exprime un doute que ce soit ton souci, puisque tu dis pouvoir démarrer en insistant...
Si çà ne règle pas le problème, Stp veux tu bien ouvrir un autre sujet. Merci.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#10 Le 15/08/2015, à 06:27
- Alain_Le_Bel
Re : [Résolu] soucis d'amorçage / démarrage
Babdu89 bonjour,
Hier j'ai interrompu vers 21 h et ce matin il a démarré de suite, C'est la première fois après un arrêt long, image de fond avec plein de points sur tout l'écran mais clavier actif, je note la manipulation et si elle est pertinente je note en retour ici. 
Dans le cas contraire j'ouvre un autre poste.
Merci !
Merci ! Si c'était facile... Ce ne serait pas pour nous...
Ubuntu 20.04 LTS ; Mémoire : 3,9 Gio ; Processeur : AMD Athlon(tm) II X2 265 Processor × 2 ; Carte Graphique : disparue depuis 14.04 (GeForce GTS 450 1024MB GDDR5) ; Type d'OS : 64-bit ; Disque : 233,2 Go
Je n'arrive pas à mettre de commentaires sur les forums matériel... Un portable LDLC 17 pouces
Hors ligne
#11 Le 27/08/2015, à 11:31
- Alain_Le_Bel
Re : [Résolu] soucis d'amorçage / démarrage
Toutes et Tous bonjour,
Et oui je n'ai pas oublié, mais depuis mon dernier poste j'ai eu beaucoup moins de faux démarrages... Le passage sur ce site peut-être.
Effectivement je ne continuerais pas sur ce poste car quand je plante au démarrage je n'ai pas de menu et le clavier reste inactif, survenu 3 fois depuis le 15 août...
Seul un appui sur le bouton marche permet d'arrêter et de redémarrer sans plantage...
Je créerais un poste spécifique si ça perdure dans le temps, mais ces pannes devenant rares je ne vais pas gêner des recherches plus sérieuses.
Merci de votre aide,
Bonne continuation !
Merci ! Si c'était facile... Ce ne serait pas pour nous...
Ubuntu 20.04 LTS ; Mémoire : 3,9 Gio ; Processeur : AMD Athlon(tm) II X2 265 Processor × 2 ; Carte Graphique : disparue depuis 14.04 (GeForce GTS 450 1024MB GDDR5) ; Type d'OS : 64-bit ; Disque : 233,2 Go
Je n'arrive pas à mettre de commentaires sur les forums matériel... Un portable LDLC 17 pouces
Hors ligne
Pages : 1