Ubuntu-fr

Celinora

Disque USB... j'ai tout cassé :$

Bonjour,

A Noël, j'avais reçu un super petit disque dur USB 160Go Seagate Free Agent Go. Je l'avais branché sur mon Ubuntu, mais impossible d'écrire dessus car c'était en NTFS et je n'avais pas installé ce qu'il faut. Sauf que ça je l'ai compris après... :]
Donc je me suis dis, pas grave, je vais éditer les options de montage et le mettre en écriture et pas lecture only. J'ai donc fais ça à ma sauce via l'outil graphique de Gnome (modifier options de montage). Débranché, rebranché, et pouf, plus de disque !
J'ai cherché en vain le fichier où étaient ces paramètres, même en recherchant avec le nom du disque ou la ligne que j'avais mis (je ne m'en souviens plus), et impossible à trouver.

Depuis j'ai installé ntfs-3g et coché les options, mais je suis toujours coincée avec ce disque qui ne s'affiche pas ! Depuis j'ai du tricher et l'utiliser sous Windows (je suis en dual boot) pour faire mes sauvegardes, car je n'avais pas le temps de m'en occuper. Maintenant, j'en ai un peu, et j'aimerais bien règler ce petit souci, si vous avez une idée de comment faire ?

D'ailleurs bizarrement, sur mon portable en Dual boot aussi, sur lequel j'ai d'abord commencé par installer ntfs-3g, ça ne marche pas non plus... A croire que la config est sauvé sur le disque spécialement pour ubuntu... ?!

Ah et sinon je suis toujours sous Feisty, et mon portable, je crois sous la dernière d'Octobre (mais je ne l'ai pas sous la main pour vérifier).

Merci d'avance !

Celinora

Ungars

Re : Disque USB... j'ai tout cassé :$

Salut, peux tu faire mount en console ?

Celinora

Re : Disque USB... j'ai tout cassé :$

Voilà :

/dev/hda7 on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
/sys on /sys type sysfs (rw,noexec,nosuid,nodev)
varrun on /var/run type tmpfs (rw,noexec,nosuid,nodev,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
procbususb on /proc/bus/usb type usbfs (rw)
udev on /dev type tmpfs (rw,mode=0755)
devshm on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
lrm on /lib/modules/2.6.20-15-generic/volatile type tmpfs (rw)
/dev/disk/by-uuid/130DB0774F14F4C9 on /media/hda1 type fuseblk (rw,nosuid,nodev,noatime,allow_other,blksize=4096)
/dev/disk/by-uuid/4C36BC686D4A1724 on /media/hda5 type fuseblk (rw,nosuid,nodev,noatime,allow_other,blksize=4096)
/dev/hda6 on /media/hda6 type vfat (rw,utf8,umask=007,gid=46)
nfsd on /proc/fs/nfsd type nfsd (rw)
rpc_pipefs on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)

Ungars

Re : Disque USB... j'ai tout cassé :$

Ok, peux tu faire maintenant df -h ?

Celinora

Re : Disque USB... j'ai tout cassé :$

(Merci )

Voilà donc : (mon disque est branché au fait)

Filesystem            Size  Used Avail Use% Mounted on
/dev/hda7              12G  8.5G  2.1G  81% /
varrun                506M  236K  506M   1% /var/run
varlock               506M     0  506M   0% /var/lock
procbususb            506M  104K  506M   1% /proc/bus/usb
udev                  506M  104K  506M   1% /dev
devshm                506M     0  506M   0% /dev/shm
lrm                   506M   33M  473M   7% /lib/modules/2.6.20-15-generic/volatile
/dev/disk/by-uuid/130DB0774F14F4C9
                      7.9G  5.4G  2.5G  69% /media/hda1
/dev/disk/by-uuid/4C36BC686D4A1724
                       15G  4.8G  9.9G  33% /media/hda5
/dev/hda6              40G  8.9G   31G  23% /media/hda6

Ungars

Re : Disque USB... j'ai tout cassé :$

Bon, c' est un Sata ton disque ?
Quand tu branches ton disque, tape dmesg

Ungars

Re : Disque USB... j'ai tout cassé :$

Et puis fais lsusb j' oubliais !

Celinora

Re : Disque USB... j'ai tout cassé :$

.. :S ! Bah non c'est pas un SADA à ce que je sache...
C'est celui là :
http://www.prixdunet.com/details/Seagate_Free_Agent_GO_160Go/

Comme la commande dmesg donnait un message je l'ai mis en pipe dans un fichier text pour tout récupérer, c'est assez énorme : (je l'ai fais après avoir débranché/rebranché, sur de nouveaux ports USB -il a deux câbles- un alim USB un data USB)

[    0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fef0000 end: 000000003fff0000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000003fff0000 size: 0000000000003000 end: 000000003fff3000 type: 4
[    0.000000] copy_e820_map() start: 000000003fff3000 size: 000000000000d000 end: 0000000040000000 type: 3
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[    0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] 127MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   262128
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   262128
[    0.000000] On node 0 totalpages: 262128
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 255 pages used for memmap
[    0.000000]   HighMem zone: 32497 pages, LIFO batch:7
[    0.000000] DMI 2.2 present.
[    0.000000] ACPI: RSDP (v000 Nvidia                                ) @ 0x000f75c0
[    0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
[    0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
[    0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff74c0
[    0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:8 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[    0.000000] Detected 1997.012 MHz processor.
[   32.671907] Built 1 zonelists.  Total pages: 260081
[   32.671911] Kernel command line: root=UUID=23442dc3-cd7e-456b-b07d-46d4b224dca8 ro quiet splash udev
[   32.672080] mapped APIC to ffffd000 (fee00000)
[   32.672083] mapped IOAPIC to ffffc000 (fec00000)
[   32.672086] Enabling fast FPU save and restore... done.
[   32.672089] Enabling unmasked SIMD FPU exception support... done.
[   32.672100] Initializing CPU#0
[   32.672167] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   32.676635] Console: colour VGA+ 80x25
[   32.677355] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   32.678616] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   32.708944] Memory: 1028060k/1048512k available (1992k kernel code, 19692k reserved, 893k data, 328k init, 131008k highmem)
[   32.708955] virtual kernel memory layout:
[   32.708956]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   32.708957]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   32.708959]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   32.708960]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   32.708961]       .init : 0xc03d7000 - 0xc0429000   ( 328 kB)
[   32.708962]       .data : 0xc02f2264 - 0xc03d16d4   ( 893 kB)
[   32.708964]       .text : 0xc0100000 - 0xc02f2264   (1992 kB)
[   32.708967] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   32.788003] Calibrating delay using timer specific routine.. 3997.15 BogoMIPS (lpj=7994307)
[   32.788057] Security Framework v1.0.0 initialized
[   32.788067] SELinux:  Disabled at boot.
[   32.788087] Mount-cache hash table entries: 512
[   32.788272] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[   32.788282] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   32.788284] CPU: L2 Cache: 256K (64 bytes/line)
[   32.788287] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[   32.788300] Compat vDSO mapped to ffffe000.
[   32.788307] Remapping vsyscall page to ffffe000
[   32.788319] Checking 'hlt' instruction... OK.
[   32.804147] SMP alternatives: switching to UP code
[   32.804484] Freeing SMP alternatives: 11k freed
[   32.804763] Early unpacking initramfs... done
[   33.117216] ACPI: Core revision 20060707
[   33.124106] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   33.127079] CPU0: AMD Athlon(tm) XP 2400+ stepping 01
[   33.127101] Total of 1 processors activated (3997.15 BogoMIPS).
[   33.127305] ENABLING IO-APIC IRQs
[   33.127504] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[   33.271355] Brought up 1 CPUs
[   33.271627] Booting paravirtualized kernel on bare hardware
[   33.271707] Time:  8:40:23  Date: 02/09/108
[   33.271747] NET: Registered protocol family 16
[   33.271861] EISA bus registered
[   33.271866] ACPI: bus type pci registered
[   33.304033] PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
[   33.304035] PCI: Using configuration type 1
[   33.304037] Setting up standard PCI resources
[   33.317735] ACPI: Interpreter enabled
[   33.317740] ACPI: Using IOAPIC for interrupt routing
[   33.318354] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   33.318361] PCI: Probing PCI hardware (bus 00)
[   33.318617] PCI: nForce2 C1 Halt Disconnect fixup
[   33.319283] Boot video device is 0000:02:00.0
[   33.319333] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   33.369798] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[   33.370297] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[   33.371295] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   33.371578] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   33.371858] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   33.372137] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   33.372415] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   33.372692] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   33.372972] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   33.373250] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   33.373527] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   33.373809] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   33.374088] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   33.374369] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   33.374659] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   33.374941] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   33.375237] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   33.375515] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   33.375776] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[   33.376020] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[   33.376267] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[   33.376512] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[   33.376755] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[   33.377077] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[   33.377395] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[   33.377709] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[   33.378032] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[   33.378345] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[   33.378660] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[   33.378908] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[   33.379226] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[   33.379541] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[   33.379858] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[   33.380172] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[   33.383498] Linux Plug and Play Support v0.97 (c) Adam Belay
[   33.383521] pnp: PnP ACPI init
[   33.389267] pnp: PnP ACPI: found 17 devices
[   33.389273] PnPBIOS: Disabled by ACPI PNP
[   33.389345] PCI: Using ACPI for IRQ routing
[   33.389353] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   33.426148] NET: Registered protocol family 8
[   33.426151] NET: Registered protocol family 20
[   33.426749] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[   33.426753] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[   33.426756] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[   33.426758] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[   33.426761] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[   33.426764] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[   33.426770] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[   33.426772] pnp: 00:01: ioport range 0x5500-0x553f has been reserved
[   33.427098] PCI: Bridge: 0000:00:08.0
[   33.427100]   IO window: disabled.
[   33.427105]   MEM window: disabled.
[   33.427108]   PREFETCH window: disabled.
[   33.427115] PCI: Bridge: 0000:00:1e.0
[   33.427117]   IO window: disabled.
[   33.427121]   MEM window: e4000000-e6ffffff
[   33.427125]   PREFETCH window: d0000000-dfffffff
[   33.427137] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   33.427173] NET: Registered protocol family 2
[   33.463117] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   33.463355] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   33.465128] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   33.466016] TCP: Hash tables configured (established 131072 bind 65536)
[   33.466021] TCP reno registered
[   33.475170] checking if image is initramfs... it is
[   34.063422] Freeing initrd memory: 7009k freed
[   34.063978] audit: initializing netlink socket (disabled)
[   34.063996] audit(1205052023.472:1): initialized
[   34.064071] highmem bounce pool size: 64 pages
[   34.064134] VFS: Disk quotas dquot_6.5.1
[   34.064161] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   34.064221] io scheduler noop registered
[   34.064224] io scheduler anticipatory registered
[   34.064226] io scheduler deadline registered
[   34.064235] io scheduler cfq registered (default)
[   34.064524] isapnp: Scanning for PnP cards...
[   34.418546] isapnp: No Plug & Play device found
[   34.448770] Real Time Clock Driver v1.12ac
[   34.448831] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   34.448971] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   34.449252] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   34.450129] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   34.450517] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   34.450832] mice: PS/2 mouse device common for all mice
[   34.451402] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   34.451671] input: Macintosh mouse button emulation as /class/input/input0
[   34.451705] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   34.451710] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   34.451958] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   34.455171] serio: i8042 KBD port at 0x60,0x64 irq 1
[   34.455179] serio: i8042 AUX port at 0x60,0x64 irq 12
[   34.455377] EISA: Probing bus 0 at eisa.0
[   34.455401] Cannot allocate resource for EISA slot 4
[   34.455404] Cannot allocate resource for EISA slot 5
[   34.455419] EISA: Detected 0 cards.
[   34.485483] TCP cubic registered
[   34.485490] NET: Registered protocol family 1
[   34.485518] Using IPI No-Shortcut mode
[   34.485531] Time: tsc clocksource has been installed.
[   34.485598] ACPI: (supports S0 S1 S4 S5)
[   34.485650]   Magic number: 0:635:674
[   34.486279] Freeing unused kernel memory: 328k freed
[   34.505660] input: AT Translated Set 2 keyboard as /class/input/input1
[   35.735221] Capability LSM initialized
[   36.335144] usbcore: registered new interface driver usbfs
[   36.335171] usbcore: registered new interface driver hub
[   36.335195] usbcore: registered new device driver usb
[   36.336050] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   36.336498] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[   36.336509] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16
[   36.336523] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   36.336527] ohci_hcd 0000:00:02.0: OHCI Host Controller
[   36.336704] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[   36.336730] ohci_hcd 0000:00:02.0: irq 16, io mem 0xe7004000
[   36.363566] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[   36.417626] usb usb1: configuration #1 chosen from 1 choice
[   36.417658] hub 1-0:1.0: USB hub found
[   36.417674] hub 1-0:1.0: 3 ports detected
[   36.486406] SCSI subsystem initialized
[   36.491655] libata version 2.20 loaded.
[   36.523024] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[   36.523037] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17
[   36.523054] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   36.523058] ohci_hcd 0000:00:02.1: OHCI Host Controller
[   36.523086] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[   36.523107] ohci_hcd 0000:00:02.1: irq 17, io mem 0xe7005000
[   36.584448] usb usb2: configuration #1 chosen from 1 choice
[   36.584483] hub 2-0:1.0: USB hub found
[   36.584498] hub 2-0:1.0: 3 ports detected
[   36.595707] FDC 0 is a post-1991 82077
[   36.690785] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[   36.690797] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 18
[   36.690810] PCI: Setting latency timer of device 0000:00:02.2 to 64
[   36.690814] ehci_hcd 0000:00:02.2: EHCI Host Controller
[   36.690840] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[   36.690885] ehci_hcd 0000:00:02.2: debug port 1
[   36.690890] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[   36.690904] ehci_hcd 0000:00:02.2: irq 18, io mem 0xe7000000
[   36.690912] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   36.690996] usb usb3: configuration #1 chosen from 1 choice
[   36.691024] hub 3-0:1.0: USB hub found
[   36.691034] hub 3-0:1.0: 6 ports detected
[   36.798632] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[   36.798639] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16
[   36.798646] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   37.133477] usb 3-5: new high speed USB device using ehci_hcd and address 2
[   37.274659] usb 3-5: configuration #1 chosen from 2 choices
[   37.307618] usbcore: registered new interface driver libusual
[   37.311735] Initializing USB Mass Storage driver...
[   37.311855] scsi0 : SCSI emulation for USB Mass Storage devices
[   37.311918] usbcore: registered new interface driver usb-storage
[   37.311921] USB Mass Storage support registered.
[   37.312044] usb-storage: device found at 2
[   37.312046] usb-storage: waiting for device to settle before scanning
[   37.321542] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
[   37.326238] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[   37.326267] NFORCE2: chipset revision 162
[   37.326270] NFORCE2: not 100% native mode: will probe irqs later
[   37.326275] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
[   37.326282] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[   37.326294]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[   37.326307]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[   37.326316] Probing IDE interface ide0...
[   37.616875] hda: ST380011A, ATA DISK drive
[   38.064201] hdb: Pioneer DVD-ROM ATAPIModel DVD-120S, ATAPI CD/DVD-ROM drive
[   38.120990] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   38.125788] Probing IDE interface ide1...
[   38.702318] hda: max request size: 512KiB
[   38.714349] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
[   38.714703] hda: cache flushes supported
[   38.714771]  hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
[   38.834895] hdb: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(66)
[   38.834914] Uniform CD-ROM driver Revision: 3.20
[   39.223973] Attempting manual resume
[   39.223978] swsusp: Resume From Partition 3:8
[   39.223980] PM: Checking swsusp image.
[   39.224235] PM: Resume from disk failed.
[   39.266899] kjournald starting.  Commit interval 5 seconds
[   39.266914] EXT3-fs: mounted filesystem with ordered data mode.
[   42.305906] usb-storage: device scan complete
[   42.321736] scsi 0:0:0:0: Direct-Access     Apple    iPod             1.62 PQ: 0 ANSI: 0
[   49.938911] NET: Registered protocol family 17
[   50.380109] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[   50.380149] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
[   50.718242] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   50.720707] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   51.203249] Linux agpgart interface v0.102 (c) Dave Jones
[   51.213536] agpgart: Detected NVIDIA nForce2 chipset
[   51.218393] agpgart: AGP aperture is 64M @ 0xe0000000
[   51.241910] input: PC Speaker as /class/input/input2
[   51.432025] parport: PnPBIOS parport detected.
[   51.432101] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   51.577797] nvidia: module license 'NVIDIA' taints kernel.
[   51.883241] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[   51.883254] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 19
[   51.883770] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-9631  Thu Nov  9 17:38:10 PST 2006
[   51.903207] SCSI device sda: 1941441 4096-byte hdwr sectors (7952 MB)
[   51.904094] sda: Write Protect is off
[   51.904096] sda: Mode Sense: 68 00 00 08
[   51.904099] sda: assuming drive cache: write through
[   51.909735] SCSI device sda: 1941441 4096-byte hdwr sectors (7952 MB)
[   51.911308] sda: Write Protect is off
[   51.911311] sda: Mode Sense: 68 00 00 08
[   51.911313] sda: assuming drive cache: write through
[   51.911317]  sda: sda1
[   51.914253] sd 0:0:0:0: Attached scsi removable disk sda
[   52.002402] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[   52.019086] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   52.071150] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
[   52.071158] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 17
[   52.071190] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   52.386488] intel8x0_measure_ac97_clock: measured 56701 usecs
[   52.386493] intel8x0: clocking to 47470
[   52.569360] fuse init (API version 7.8)
[   52.601098] lp0: using parport0 (interrupt-driven).
[   52.638582] Adding 1895628k swap on /dev/disk/by-uuid/8c2bddca-7d2d-46a3-b92e-d0dda040c1b7.  Priority:-1 extents:1 across:1895628k
[   52.842892] EXT3 FS on hda7, internal journal
[   53.121302] NET: Registered protocol family 10
[   53.121416] lo: Disabled Privacy Extensions
[   63.525678] eth0: no IPv6 routers present
[   65.349056] No dock devices found.
[   65.433081] Using specific hotkey driver
[   65.526742] input: Power Button (FF) as /class/input/input4
[   65.531664] ACPI: Power Button (FF) [PWRF]
[   65.568174] input: Power Button (CM) as /class/input/input5
[   65.573061] ACPI: Power Button (CM) [PWRB]
[   65.620406] ibm_acpi: ec object not found
[   65.712447] pcc_acpi: loading...
[   70.853567] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[   70.853586] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[   70.853630] agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
[   71.440386] **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 2:00.0] forgot to specify physical device; fix it!
[   71.443754] **WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 2:00.0] forgot to specify physical device; fix it!
[   71.444636] **WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 2:00.0] forgot to specify physical device; fix it!
[   71.828015] ppdev: user-space parallel port driver
[   72.762478] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   72.762485] apm: overridden by ACPI.
[   73.019257] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   73.151516] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   73.164831] NFSD: starting 90-second grace period
[   76.141615] Bluetooth: Core ver 2.11
[   76.141703] NET: Registered protocol family 31
[   76.141705] Bluetooth: HCI device and connection manager initialized
[   76.141710] Bluetooth: HCI socket layer initialized
[   76.180094] Bluetooth: L2CAP ver 2.8
[   76.180100] Bluetooth: L2CAP socket layer initialized
[   76.334934] Bluetooth: RFCOMM socket layer initialized
[   76.334954] Bluetooth: RFCOMM TTY layer initialized
[   76.334956] Bluetooth: RFCOMM ver 1.8
[   88.084648] eth0: no IPv6 routers present
[  579.564751] usb 3-5: USB disconnect, address 2
[  579.632549] scsi 0:0:0:0: rejecting I/O to dead device
[  593.707440] usb 3-5: new high speed USB device using ehci_hcd and address 3
[  593.856062] usb 3-5: configuration #1 chosen from 1 choice
[  593.860139] scsi1 : SCSI emulation for USB Mass Storage devices
[  593.860215] usb-storage: device found at 3
[  593.860217] usb-storage: waiting for device to settle before scanning
[  598.853220] usb-storage: device scan complete
[  598.854713] scsi 1:0:0:0: Direct-Access     Seagate  FreeAgent Go     100F PQ: 0 ANSI: 4
[  598.857556] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[  598.858924] sda: Write Protect is off
[  598.858927] sda: Mode Sense: 1c 00 00 00
[  598.858930] sda: assuming drive cache: write through
[  598.860923] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[  598.862419] sda: Write Protect is off
[  598.862422] sda: Mode Sense: 1c 00 00 00
[  598.862424] sda: assuming drive cache: write through
[  598.862429]  sda:<6>usb 3-5: reset high speed USB device using ehci_hcd and address 3
[  635.501844] hdb: status timeout: status=0xd8 { Busy }
[  635.501851] ide: failed opcode was: unknown
[  635.502804] usb 3-5: can't restore configuration #1 (error=-110)
[  635.502873] usb 3-5: USB disconnect, address 3
[  635.503095] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
[  635.503099]  printing eip:
[  635.503101] c0258315
[  635.503102] *pde = 00000000
[  635.503105] Oops: 0000 [#1]
[  635.503107] SMP 
[  635.503110] Modules linked in: binfmt_misc rfcomm l2cap bluetooth nfs nfsd exportfs lockd sunrpc ppdev cpufreq_userspace cpufreq_stats cpufreq_conservative cpufreq_ondemand freq_table cpufreq_powersave pcc_acpi sony_acpi tc1100_wmi dev_acpi container ac sbs button battery asus_acpi backlight i2c_ec dock video nls_iso8859_1 nls_cp437 vfat fat ipv6 lp fuse snd_mpu401 snd_mpu401_uart snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_seq_device snd_intel8x0 snd_ac97_codec sg ac97_bus snd_pcm_oss sd_mod analog nvidia(P) gameport snd_mixer_oss snd_pcm snd_timer parport_pc parport snd psmouse pcspkr serio_raw nvidia_agp agpgart soundcore snd_page_alloc shpchp pci_hotplug i2c_nforce2 i2c_core af_packet evdev tsdev ext3 jbd mbcache ide_cd cdrom ide_disk amd74xx generic ata_generic usb_storage libusual floppy sata_nv libata scsi_mod forcedeth ehci_hcd ohci_hcd usbcore thermal processor fan fbcon tileblit font bitblit softcursor vesafb capability commoncap
[  635.503172] CPU:    0
[  635.503173] EIP:    0060:[<c0258315>]    Tainted: P      VLI
[  635.503175] EFLAGS: 00010202   (2.6.20-15-generic #2)
[  635.503187] EIP is at make_class_name+0x35/0xa0
[  635.503190] eax: 00000000   ebx: ffffffff   ecx: ffffffff   edx: 0000000b
[  635.503193] esi: f88f4c91   edi: 00000000   ebp: 00000000   esp: dfd33e50
[  635.503195] ds: 007b   es: 007b   ss: 0068
[  635.503198] Process khubd (pid: 1992, ti=dfd32000 task=c19ffab0 task.ti=dfd32000)
[  635.503200] Stack: dfda7a04 f8906ec0 dfda79fc dfda7a04 f8906e40 c0258591 00000000 f8906ec8 
[  635.503206]        dfda79fc dfa23400 00000246 ffffffed c0258618 dfda7800 f88eea50 dfda7800 
[  635.503212]        dfa23400 f88ec12b dfa23430 dfa23400 f88e6825 dfa236f4 dfad4618 f894ef60 
[  635.503218] Call Trace:
[  635.503224]  [<c0258591>] class_device_del+0xa1/0x120
[  635.503232]  [<c0258618>] class_device_unregister+0x8/0x10
[  635.503237]  [<f88eea50>] __scsi_remove_device+0x30/0x80 [scsi_mod]
[  635.503273]  [<f88ec12b>] scsi_forget_host+0x4b/0x60 [scsi_mod]
[  635.503289]  [<f88e6825>] scsi_remove_host+0x55/0xe0 [scsi_mod]
[  635.503305]  [<f8940cae>] storage_disconnect+0xe/0x20 [usb_storage]
[  635.503318]  [<f8882d20>] usb_unbind_interface+0x50/0xa0 [usbcore]
[  635.503352]  [<c02578a8>] __device_release_driver+0x68/0xa0
[  635.503358]  [<c0257dd3>] device_release_driver+0x23/0x40
[  635.503363]  [<c025721c>] bus_remove_device+0x5c/0x90
[  635.503369]  [<c0255672>] device_del+0x152/0x1b0
[  635.503375]  [<f88801ee>] usb_disable_device+0x7e/0xe0 [usbcore]
[  635.503392]  [<f887c597>] usb_disconnect+0x97/0x130 [usbcore]
[  635.503412]  [<f887d2ff>] hub_thread+0x26f/0xc20 [usbcore]
[  635.503438]  [<c013adf0>] autoremove_wake_function+0x0/0x50
[  635.503450]  [<f887d090>] hub_thread+0x0/0xc20 [usbcore]
[  635.503463]  [<c013ac3a>] kthread+0xba/0xf0
[  635.503468]  [<c013ab80>] kthread+0x0/0xf0
[  635.503473]  [<c01044c7>] kernel_thread_helper+0x7/0x10
[  635.503482]  =======================
[  635.503483] Code: ff ff 89 6c 24 10 31 ed 89 d9 89 74 24 08 89 c6 89 7c 24 0c 89 c7 89 e8 89 14 24 f2 ae f7 d1 49 8b 04 24 89 ca 89 d9 8b 38 89 e8 <f2> ae f7 d1 49 8d 44 0a 02 ba d0 00 00 00 e8 38 ae f1 ff ba f4 
[  635.503506] EIP: [<c0258315>] make_class_name+0x35/0xa0 SS:ESP 0068:dfd33e50
[  635.503511]  <6>sd 1:0:0:0: scsi: Device offlined - not ready after error recovery
[  635.503751] sd 1:0:0:0: SCSI error: return code = 0x00010000
[  635.503754] end_request: I/O error, dev sda, sector 0
[  635.503759] Buffer I/O error on device sda, logical block 0
[  635.503790] Buffer I/O error on device sda, logical block 0
[  635.503811] Buffer I/O error on device sda, logical block 0
[  635.503821] Buffer I/O error on device sda, logical block 0
[  635.503831] Buffer I/O error on device sda, logical block 0
[  635.503837] ldm_validate_partition_table(): Disk read failed.
[  635.503844] Buffer I/O error on device sda, logical block 0
[  635.503853] Buffer I/O error on device sda, logical block 0
[  635.503896] Buffer I/O error on device sda, logical block 0
[  635.503906] Buffer I/O error on device sda, logical block 0
[  635.503911] Dev sda: unable to read RDB block 0
[  635.503918] Buffer I/O error on device sda, logical block 0
[  635.503955]  unknown partition table
[  635.504019] sd 1:0:0:0: Attached scsi disk sda
[  635.504104] sd 1:0:0:0: Attached scsi generic sg0 type 0
[29185.102214] printk: 44 messages suppressed.
[29185.102223] Buffer I/O error on device sda, logical block 0
[29185.102376] Buffer I/O error on device sda, logical block 0
[29185.102421] Buffer I/O error on device sda, logical block 0
[29185.102440] Buffer I/O error on device sda, logical block 1
[29185.102450] Buffer I/O error on device sda, logical block 2
[29185.102460] Buffer I/O error on device sda, logical block 3
[29185.102469] Buffer I/O error on device sda, logical block 0
[29324.877472] Buffer I/O error on device sda, logical block 0
[29324.877584] Buffer I/O error on device sda, logical block 0
[29324.877704] Buffer I/O error on device sda, logical block 0
[29324.877790] Buffer I/O error on device sda, logical block 1
[29324.877873] Buffer I/O error on device sda, logical block 2
[29324.877954] Buffer I/O error on device sda, logical block 3
[29324.878036] Buffer I/O error on device sda, logical block 0

Celinora

Re : Disque USB... j'ai tout cassé :$

Je voulais dire STA évidemment....

Celinora

Re : Disque USB... j'ai tout cassé :$

SATA... arf Faudrait que je créé un compte...

Merci d'avance !

Celinora

Re : Disque USB... j'ai tout cassé :$

Je viens de voir pour lsusb...

Bein, le processus ne se termine pas... La console ne me redonne pas la main... Je dois quitter la console pour l'arrêter. Et dans une autre avec ps -A je le vois tourner tant que je ne kill pas la console...

Ungars

Re : Disque USB... j'ai tout cassé :$

Une hypothèse c' est qu' effectivement il ne reconnait pas le NTFS. Apparament il ne se charge pas... Il manque surement quelque chose mais là ça dépasse mes compétences.

Celinora

Re : Disque USB... j'ai tout cassé :$

Snif ! Pourtant il arrivait à le _lire_ correctement à Noël, et depuis j'ai installé ntfs 3g et coché les deux cases...

Merci quand même, j'espère que quelqu'un pourra m'aider, c'est tout de même ennuyant!

Ungars

Re : Disque USB... j'ai tout cassé :$

Si tu arrivais à lire et pas à ecrire, à mon avis ça doit être tout bête comme problème, je suis sur que quelqu' un va trouver !

Ungars

Re : Disque USB... j'ai tout cassé :$

T' avais un message d' erreur quand tu voulais ecrire ?

Celinora

Re : Disque USB... j'ai tout cassé :$

Je ne me souviens plus à vrai dire, ça fait presque trois mois...

Effectivement le problème tout bête c'est que je n'avais pas ntfs-3g, mais j'ai bidouillé croyant bien faire, inventant ma ligne de "mount", et depuis je ne sais pas où éditer mes bétises ... Mais mon pc portable n'arrive pas à le voir non plus alors que je n'ai rien fait dessus par contre !

Ungars

Re : Disque USB... j'ai tout cassé :$

Peut etre à l' origine un problème de droit en ecriture, mais ceux ne sont que des hypothèses. Si personne d' autre a une idée, tu peux toujours retirer ntfs-3g et voir le message d' erreur.

Dernière modification par Ungars (Le 09/03/2008, à 19:20)

amkoolgarst

Re : Disque USB... j'ai tout cassé :$

salut, des pistes, juste des pistes...:

BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000

dans ton dmesg renvoit à un bug----> regarde ce post par exemple:

http://forum.ubuntu-fr.org/viewtopic.php?id=105418

Je chercherais aussi des infos sur cette erreur-->

Buffer I/O error on device sda, logical block 0

AS -tu essayé de remonter sda ( en fait tentes avec sda1)...?

---

Jifya moja haliinjiki chungu.
In girum imus nocte, ecce, et consumimur igni.