#1 Le 17/06/2016, à 11:35
- kungfu07
Ubuntu 16.04 LTS démarrage/extinction trop lente
Salut à tous,
Comme le montre le sujet j'ai Ubuntu 16.04 LTS 64bits, mon pc hp 630,i3,6g ram, met beaucoup de temps à démarrer ou s’éteindre.
SVP aidez moi.
MERCI.
Hors ligne
#2 Le 17/06/2016, à 12:00
- malbo
Re : Ubuntu 16.04 LTS démarrage/extinction trop lente
Déconnecte ton imprimante et tout autre périphérique - disque dur externe, écran secondaire, etc...- qui peut être déconnecté momentanément. Puis refais des essais de démarrage/extinction pour voir si ça s'est amélioré.
Actuellement (avec tout connecté), c'est combien de secondes pour la démarrage et combien de secondes pour l'extinction ?
Dernière modification par malbo (Le 17/06/2016, à 12:01)
Hors ligne
#3 Le 17/06/2016, à 12:23
- kholo
Re : Ubuntu 16.04 LTS démarrage/extinction trop lente
salut,
juste après le démarrage, le retour de
dmesgdevrait donner des infos sur le ou les points de blocage
Hors ligne
#4 Le 17/06/2016, à 12:26
- kungfu07
Re : Ubuntu 16.04 LTS démarrage/extinction trop lente
Avec tous les périphériques déconnectés et plusieurs tests:
démarrage: +50s
extinction: + 1min 30s
Hors ligne
#5 Le 17/06/2016, à 12:39
- malbo
Re : Ubuntu 16.04 LTS démarrage/extinction trop lente
J'ai parcouru tes anciens messages sur le forum et je vois que tu avais la version 14.04 auparavant. Si tu n'avais pas d'ennuis avec cette version 14.04, ce serait vraiment utile de la réinstaller puisque cette version 14.04 est encore maintenue jusqu'en Avril 2019 (source).
Hors ligne
#6 Le 17/06/2016, à 13:03
- kungfu07
Re : Ubuntu 16.04 LTS démarrage/extinction trop lente
dmesg:
[ 0.000000] microcode: CPU0 microcode updated early to revision 0x4, date = 2013-06-28
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-24-generic (buildd@lgw01-12) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) ) #43-Ubuntu SMP Wed Jun 8 19:27:37 UTC 2016 (Ubuntu 4.4.0-24.43-generic 4.4.10)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-24-generic root=UUID=3493dcec-11f7-4c8c-9bc0-2fdcae0f0648 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009cc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb63efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb63f000-0x00000000bb6befff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb6bf000-0x00000000bb7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb7bf000-0x00000000bb7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017bffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000017c000000-0x000000017fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000180000000-0x00000001bbffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP 630 Notebook PC /3674, BIOS F.33 12/13/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1bc000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-combining
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BB800000 mask FFF800000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 1BC000000 mask FFC000000 uncachable
[ 0.000000] 7 base 1C0000000 mask FC0000000 uncachable
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] BRK [0x021ff000, 0x021fffff] PGTABLE
[ 0.000000] BRK [0x02200000, 0x02200fff] PGTABLE
[ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33b66000-0x35daafff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x00000000BB7FE120 000074 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 0x00000000BB7FC000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 0x00000000BB7EB000 00D88A (v02 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 0x00000000BB76D000 000040
[ 0.000000] ACPI: FACS 0x00000000BB76D000 000040
[ 0.000000] ACPI: ASF! 0x00000000BB7FD000 0000A5 (v32 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 0x00000000BB7FB000 000038 (v01 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 0x00000000BB7FA000 00008C (v02 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 0x00000000BB7F9000 00003C (v01 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 0x00000000BB7EA000 000176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: BOOT 0x00000000BB7E6000 000028 (v01 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASPT 0x00000000BB7E3000 000034 (v04 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: WDAT 0x00000000BB7E2000 000224 (v01 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x00000000BB7E1000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bbffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1bbff8000-0x1bbffcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001bbffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bb63efff]
[ 0.000000] node 0: [mem 0x00000000bb7ff000-0x00000000bb7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000017bffffff]
[ 0.000000] node 0: [mem 0x0000000180000000-0x00000001bbffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bbffffff]
[ 0.000000] On node 0 totalpages: 1521115
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11929 pages used for memmap
[ 0.000000] DMA32 zone: 763456 pages, LIFO batch:31
[ 0.000000] Normal zone: 12032 pages used for memmap
[ 0.000000] Normal zone: 753664 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb63f000-0xbb6befff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb6bf000-0xbb7befff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb7bf000-0xbb7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x17c000000-0x17fffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff8801bbc00000 s98008 r8192 d28968 u262144
[ 0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1497069
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-24-generic root=UUID=3493dcec-11f7-4c8c-9bc0-2fdcae0f0648 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5865136K/6084460K available (8361K kernel code, 1278K rwdata, 3920K rodata, 1480K init, 1292K bss, 219324K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:488 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2393.878 MHz processor
[ 0.000038] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.75 BogoMIPS (lpj=9575512)
[ 0.000041] pid_max: default: 32768 minimum: 301
[ 0.000048] ACPI: Core revision 20150930
[ 0.014638] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.014663] Security Framework initialized
[ 0.014665] Yama: becoming mindful.
[ 0.014686] AppArmor: AppArmor initialized
[ 0.015293] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.017646] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.018707] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018720] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.019017] Initializing cgroup subsys io
[ 0.019022] Initializing cgroup subsys memory
[ 0.019030] Initializing cgroup subsys devices
[ 0.019033] Initializing cgroup subsys freezer
[ 0.019036] Initializing cgroup subsys net_cls
[ 0.019039] Initializing cgroup subsys perf_event
[ 0.019041] Initializing cgroup subsys net_prio
[ 0.019044] Initializing cgroup subsys hugetlb
[ 0.019048] Initializing cgroup subsys pids
[ 0.019071] CPU: Physical Processor ID: 0
[ 0.019073] CPU: Processor Core ID: 0
[ 0.019079] mce: CPU supports 9 MCE banks
[ 0.019089] CPU0: Thermal monitoring handled by SMI
[ 0.019097] process: using mwait in idle threads
[ 0.019101] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.019102] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.019486] Freeing SMP alternatives memory: 28K (ffffffff820b3000 - ffffffff820ba000)
[ 0.051046] ftrace: allocating 31907 entries in 125 pages
[ 0.067520] smpboot: Max logical packages: 4
[ 0.067525] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.068033] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.215146] smpboot: CPU0: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz (family: 0x6, model: 0x25, stepping: 0x5)
[ 0.215166] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.215186] core: CPUID marked event: 'bus cycles' unavailable
[ 0.215189] ... version: 3
[ 0.215190] ... bit width: 48
[ 0.215191] ... generic registers: 4
[ 0.215192] ... value mask: 0000ffffffffffff
[ 0.215193] ... max period: 000000007fffffff
[ 0.215194] ... fixed-purpose events: 3
[ 0.215195] ... event mask: 000000070000000f
[ 0.216088] x86: Booting SMP configuration:
[ 0.216090] .... node #0, CPUs: #1
[ 0.216480] CPU1: Thermal monitoring handled by SMI
[ 0.218728] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.218845] #2
[ 0.219382] microcode: CPU2 microcode updated early to revision 0x4, date = 2013-06-28
[ 0.219415] CPU2: Thermal monitoring handled by SMI
[ 0.221582] #3
[ 0.221760] CPU3: Thermal monitoring handled by SMI
[ 0.223826] x86: Booted up 1 node, 4 CPUs
[ 0.223831] smpboot: Total of 4 processors activated (19151.02 BogoMIPS)
[ 0.226346] devtmpfs: initialized
[ 0.229124] evm: security.selinux
[ 0.229126] evm: security.SMACK64
[ 0.229127] evm: security.SMACK64EXEC
[ 0.229128] evm: security.SMACK64TRANSMUTE
[ 0.229129] evm: security.SMACK64MMAP
[ 0.229130] evm: security.ima
[ 0.229130] evm: security.capability
[ 0.229210] PM: Registering ACPI NVS region [mem 0xbb6bf000-0xbb7befff] (1048576 bytes)
[ 0.229323] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.229418] pinctrl core: initialized pinctrl subsystem
[ 0.229546] RTC time: 10:58:35, date: 06/17/16
[ 0.229673] NET: Registered protocol family 16
[ 0.239159] cpuidle: using governor ladder
[ 0.251155] cpuidle: using governor menu
[ 0.251163] PCCT header not found.
[ 0.251253] Simple Boot Flag at 0x44 set to 0x1
[ 0.251281] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.251283] ACPI: bus type PCI registered
[ 0.251284] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.251368] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.251371] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.251384] PCI: Using configuration type 1 for base access
[ 0.263580] ACPI: Added _OSI(Module Device)
[ 0.263582] ACPI: Added _OSI(Processor Device)
[ 0.263584] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.263585] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.266639] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.268776] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.269162] ACPI: Dynamic OEM Table Load:
[ 0.269169] ACPI: SSDT 0xFFFF8801B3D8A000 000432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.269720] ACPI: Dynamic OEM Table Load:
[ 0.269727] ACPI: SSDT 0xFFFF8801B3DF3000 000891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.270598] ACPI: Dynamic OEM Table Load:
[ 0.270604] ACPI: SSDT 0xFFFF8801B3D86800 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.271142] ACPI: Dynamic OEM Table Load:
[ 0.271152] ACPI: SSDT 0xFFFF8801B3D7FA00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.272120] ACPI : EC: EC started
[ 0.692995] ACPI: Interpreter enabled
[ 0.693005] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.693012] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.693036] ACPI: (supports S0 S3 S4 S5)
[ 0.693038] ACPI: Using IOAPIC for interrupt routing
[ 0.693075] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.744774] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.744781] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.744815] \_SB_.PCI0:_OSC invalid UUID
[ 0.744817] _OSC request data:1 1f 0
[ 0.744821] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.745297] PCI host bridge to bus 0000:00
[ 0.745300] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.745302] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.745304] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.745306] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window]
[ 0.745308] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.745317] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.745342] DMAR: Disabling batched IOTLB flush on Ironlake
[ 0.745415] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 0.745429] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
[ 0.745435] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.745440] pci 0000:00:02.0: reg 0x20: [io 0x4050-0x4057]
[ 0.745553] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.745594] pci 0000:00:16.0: reg 0x10: [mem 0xd6404000-0xd640400f 64bit]
[ 0.745671] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.745762] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.746241] pci 0000:00:1a.0: reg 0x10: [mem 0xd640a000-0xd640a3ff]
[ 0.748914] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.748975] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.749028] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.749067] pci 0000:00:1b.0: reg 0x10: [mem 0xd6400000-0xd6403fff 64bit]
[ 0.749160] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.749209] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.749253] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.749352] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.749398] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.749442] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[ 0.749539] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.749586] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.749631] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.749728] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.749774] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.749821] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.750287] pci 0000:00:1d.0: reg 0x10: [mem 0xd6409000-0xd64093ff]
[ 0.752954] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.753015] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.753058] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.753162] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.753207] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 0.753383] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 0.753420] pci 0000:00:1f.2: reg 0x10: [io 0x4048-0x404f]
[ 0.753430] pci 0000:00:1f.2: reg 0x14: [io 0x405c-0x405f]
[ 0.753441] pci 0000:00:1f.2: reg 0x18: [io 0x4040-0x4047]
[ 0.753452] pci 0000:00:1f.2: reg 0x1c: [io 0x4058-0x405b]
[ 0.753463] pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f]
[ 0.753474] pci 0000:00:1f.2: reg 0x24: [mem 0xd6408000-0xd64087ff]
[ 0.753520] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.753595] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.753619] pci 0000:00:1f.3: reg 0x10: [mem 0xd6406000-0xd64060ff 64bit]
[ 0.753649] pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f]
[ 0.753871] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.753996] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.754086] pci 0000:01:00.0: reg 0x18: [mem 0xd0404000-0xd0404fff 64bit pref]
[ 0.754157] pci 0000:01:00.0: reg 0x20: [mem 0xd0400000-0xd0403fff 64bit pref]
[ 0.754413] pci 0000:01:00.0: supports D1 D2
[ 0.754415] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.755624] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.755736] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.755741] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.755746] pci 0000:00:1c.0: bridge window [mem 0xd5400000-0xd63fffff]
[ 0.755753] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.755849] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[ 0.755929] pci 0000:02:00.0: reg 0x10: [mem 0xd4400000-0xd440ffff 64bit]
[ 0.756137] pci 0000:02:00.0: supports D1
[ 0.756138] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.756221] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.756293] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.756298] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.756302] pci 0000:00:1c.2: bridge window [mem 0xd4400000-0xd53fffff]
[ 0.756310] pci 0000:00:1c.2: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.756433] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
[ 0.756583] pci 0000:03:00.0: reg 0x10: [mem 0xd3400000-0xd3400fff]
[ 0.757018] pci 0000:03:00.0: supports D1 D2
[ 0.757019] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 0.757136] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.757245] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.757250] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
[ 0.757255] pci 0000:00:1c.4: bridge window [mem 0xd3400000-0xd43fffff]
[ 0.757262] pci 0000:00:1c.4: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.757342] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.757354] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.757356] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.757358] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.757360] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode)
[ 0.757835] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.757889] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.757942] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.757994] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.758047] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.758100] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.758153] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.758206] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.780808] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.780813] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.780817] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.780898] PCI host bridge to bus 0000:ff
[ 0.780901] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.780906] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.780956] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.781011] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.781058] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.781106] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.781151] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.781267] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.781325] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.781445] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.781447] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.781451] vgaarb: loaded
[ 0.781452] vgaarb: bridge control possible 0000:00:02.0
[ 0.781771] SCSI subsystem initialized
[ 0.781820] libata version 3.00 loaded.
[ 0.781848] ACPI: bus type USB registered
[ 0.781866] usbcore: registered new interface driver usbfs
[ 0.781877] usbcore: registered new interface driver hub
[ 0.781894] usbcore: registered new device driver usb
[ 0.782039] PCI: Using ACPI for IRQ routing
[ 0.791913] PCI: pci_cache_line_size set to 64 bytes
[ 0.791981] e820: reserve RAM buffer [mem 0x0009cc00-0x0009ffff]
[ 0.791983] e820: reserve RAM buffer [mem 0xbb63f000-0xbbffffff]
[ 0.791984] e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
[ 0.792113] NetLabel: Initializing
[ 0.792115] NetLabel: domain hash size = 128
[ 0.792116] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.792130] NetLabel: unlabeled traffic allowed by default
[ 0.792223] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.792228] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.794259] clocksource: Switched to clocksource hpet
[ 0.801689] AppArmor: AppArmor Filesystem Enabled
[ 0.801782] pnp: PnP ACPI init
[ 0.801958] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.4 BAR 13 [io 0x1000-0x1fff]
[ 0.802010] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.802013] system 00:00: [io 0x0800-0x080f] has been reserved
[ 0.802014] system 00:00: [io 0x0810-0x0813] has been reserved
[ 0.802017] system 00:00: [io 0xffff] has been reserved
[ 0.802019] system 00:00: [io 0x0400-0x047f] could not be reserved
[ 0.802021] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.802026] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.802059] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.802087] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.802116] pnp 00:03: Plug and Play ACPI device, IDs SYN1e4b SYN1e00 SYN0002 PNP0f13 (active)
[ 0.802421] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.802424] system 00:04: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.802426] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.802428] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.802430] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.802432] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.802434] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.802436] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.802439] system 00:04: [mem 0xd6500000-0xd6500fff] has been reserved
[ 0.802442] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.827013] pnp: PnP ACPI: found 5 devices
[ 0.833833] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.833884] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.833889] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.833896] pci 0000:00:1c.0: bridge window [mem 0xd5400000-0xd63fffff]
[ 0.833901] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.833909] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.833912] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.833918] pci 0000:00:1c.2: bridge window [mem 0xd4400000-0xd53fffff]
[ 0.833923] pci 0000:00:1c.2: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.833931] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.833934] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
[ 0.833940] pci 0000:00:1c.4: bridge window [mem 0xd3400000-0xd43fffff]
[ 0.833945] pci 0000:00:1c.4: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.833953] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.833968] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.833970] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.833972] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.833974] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff window]
[ 0.833976] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.833977] pci_bus 0000:01: resource 1 [mem 0xd5400000-0xd63fffff]
[ 0.833979] pci_bus 0000:01: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.833981] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.833983] pci_bus 0000:02: resource 1 [mem 0xd4400000-0xd53fffff]
[ 0.833985] pci_bus 0000:02: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.833987] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.833988] pci_bus 0000:03: resource 1 [mem 0xd3400000-0xd43fffff]
[ 0.833990] pci_bus 0000:03: resource 2 [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.833992] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.833994] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.833996] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.833998] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfeafffff window]
[ 0.834040] NET: Registered protocol family 2
[ 0.834246] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.834473] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.834754] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.834797] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.834838] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.834932] NET: Registered protocol family 1
[ 0.834953] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.866451] PCI: CLS 64 bytes, default 64
[ 0.866530] Trying to unpack rootfs image as initramfs...
[ 1.486806] Freeing initrd memory: 35092K (ffff880033b66000 - ffff880035dab000)
[ 1.486835] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.486837] software IO TLB [mem 0xb763f000-0xbb63f000] (64MB) mapped at [ffff8800b763f000-ffff8800bb63efff]
[ 1.487054] Scanning for low memory corruption every 60 seconds
[ 1.487519] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.487582] audit: initializing netlink subsys (disabled)
[ 1.487603] audit: type=2000 audit(1466161116.352:1): initialized
[ 1.488008] Initialise system trusted keyring
[ 1.488143] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.489749] zbud: loaded
[ 1.489970] VFS: Disk quotas dquot_6.6.0
[ 1.490009] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.490545] fuse init (API version 7.23)
[ 1.490697] Key type big_key registered
[ 1.490718] Allocating IMA MOK and blacklist keyrings.
[ 1.491151] Key type asymmetric registered
[ 1.491154] Asymmetric key parser 'x509' registered
[ 1.491196] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.491236] io scheduler noop registered
[ 1.491239] io scheduler deadline registered (default)
[ 1.491273] io scheduler cfq registered
[ 1.491836] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.491843] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.491873] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 1.491874] vesafb: scrolling: redraw
[ 1.491876] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.491891] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90001000000, using 3072k, total 3072k
[ 1.491990] Console: switching to colour frame buffer device 128x48
[ 1.492016] fb0: VESA VGA frame buffer device
[ 1.492032] intel_idle: MWAIT substates: 0x1120
[ 1.492033] intel_idle: v0.4.1 model 0x25
[ 1.492034] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.493999] ACPI: AC Adapter [AC] (on-line)
[ 1.494067] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.494384] ACPI: Lid Switch [LID]
[ 1.494428] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.494431] ACPI: Power Button [PWRB]
[ 1.494468] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.494470] ACPI: Power Button [PWRF]
[ 1.504031] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.504034] ACPI: Thermal Zone [TSZ0] (49 C)
[ 1.511460] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.511462] ACPI: Thermal Zone [TSZ1] (48 C)
[ 1.511497] GHES: HEST is not enabled!
[ 1.511805] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.515560] Linux agpgart interface v0.103
[ 1.515627] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.515646] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.516270] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.516446] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.519827] brd: module loaded
[ 1.522270] loop: module loaded
[ 1.522595] libphy: Fixed MDIO Bus: probed
[ 1.522600] tun: Universal TUN/TAP device driver, 1.6
[ 1.522602] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.522659] PPP generic driver version 2.4.2
[ 1.522773] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.522785] ehci-pci: EHCI PCI platform driver
[ 1.523001] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.523011] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.523027] ehci-pci 0000:00:1a.0: debug port 2
[ 1.526983] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.527000] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd640a000
[ 1.534947] ACPI: Battery Slot [BAT0] (battery absent)
[ 1.538312] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.538393] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.538396] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.538399] usb usb1: Product: EHCI Host Controller
[ 1.538401] usb usb1: Manufacturer: Linux 4.4.0-24-generic ehci_hcd
[ 1.538404] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.538622] hub 1-0:1.0: USB hub found
[ 1.538631] hub 1-0:1.0: 3 ports detected
[ 1.538918] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.538925] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.538940] ehci-pci 0000:00:1d.0: debug port 2
[ 1.542916] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.542929] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd6409000
[ 1.554318] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.554355] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.554358] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.554361] usb usb2: Product: EHCI Host Controller
[ 1.554363] usb usb2: Manufacturer: Linux 4.4.0-24-generic ehci_hcd
[ 1.554365] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.554566] hub 2-0:1.0: USB hub found
[ 1.554574] hub 2-0:1.0: 3 ports detected
[ 1.554733] ehci-platform: EHCI generic platform driver
[ 1.554752] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.554758] ohci-pci: OHCI PCI platform driver
[ 1.554772] ohci-platform: OHCI generic platform driver
[ 1.554785] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.554867] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.562247] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.562254] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.562606] mousedev: PS/2 mouse device common for all mice
[ 1.563057] rtc_cmos 00:01: RTC can wake from S4
[ 1.563235] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.563268] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.563277] i2c /dev entries driver
[ 1.563353] device-mapper: uevent: version 1.0.3
[ 1.563489] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.563514] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.564267] NET: Registered protocol family 10
[ 1.564731] NET: Registered protocol family 17
[ 1.564756] Key type dns_resolver registered
[ 1.565294] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x4
[ 1.565315] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x4
[ 1.565327] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x4
[ 1.565347] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x4
[ 1.565465] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.565934] registered taskstats version 1
[ 1.565954] Loading compiled-in X.509 certificates
[ 1.567097] Loaded X.509 cert 'Build time autogenerated kernel key: 73e2b8be326740e2e7feadd5601517c5df343108'
[ 1.567123] zswap: loaded using pool lzo/zbud
[ 1.568194] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.571936] Key type trusted registered
[ 1.579434] Key type encrypted registered
[ 1.579452] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.579460] ima: No TPM chip found, activating TPM-bypass!
[ 1.579501] evm: HMAC attrs: 0x1
[ 1.579943] Magic number: 4:778:982
[ 1.580128] rtc_cmos 00:01: setting system clock to 2016-06-17 10:58:37 UTC (1466161117)
[ 1.580982] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.580983] EDD information not available.
[ 1.581066] PM: Hibernation image not present or could not be loaded.
[ 1.582689] Freeing unused kernel memory: 1480K (ffffffff81f41000 - ffffffff820b3000)
[ 1.582692] Write protecting the kernel read-only data: 14336k
[ 1.583400] Freeing unused kernel memory: 1868K (ffff88000182d000 - ffff880001a00000)
[ 1.583919] Freeing unused kernel memory: 176K (ffff880001dd4000 - ffff880001e00000)
[ 1.597347] random: systemd-udevd urandom read with 8 bits of entropy available
[ 1.628867] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.637055] wmi: Mapper loaded
[ 1.641991] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 24
[ 1.644163] ahci 0000:00:1f.2: version 3.0
[ 1.644424] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 1.644429] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst
[ 1.646942] [drm] Initialized drm 1.1.0 20060810
[ 1.652436] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.652450] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.653071] r8169 0000:01:00.0 eth0: RTL8168e/8111e at 0xffffc90000ea6000, e4:11:5b:ef:c1:71, XID 0c200000 IRQ 26
[ 1.653074] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.653568] scsi host0: ahci
[ 1.654523] scsi host1: ahci
[ 1.654841] scsi host2: ahci
[ 1.654981] scsi host3: ahci
[ 1.655036] ata1: SATA max UDMA/133 abar m2048@0xd6408000 port 0xd6408100 irq 25
[ 1.655040] ata2: SATA max UDMA/133 abar m2048@0xd6408000 port 0xd6408180 irq 25
[ 1.655041] ata3: DUMMY
[ 1.655042] ata4: DUMMY
[ 1.693491] r8169 0000:01:00.0 eno1: renamed from eth0
[ 1.696851] [drm] Memory usable by graphics device = 2048M
[ 1.696856] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 1.696858] fb: switching to inteldrmfb from VESA VGA
[ 1.696892] Console: switching to colour dummy device 80x25
[ 1.696983] [drm] Replacing VGA console driver
[ 1.704623] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.704627] [drm] Driver supports precise vblank timestamp query.
[ 1.705673] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.725159] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.741607] acpi device:01: registered as cooling_device4
[ 1.741739] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.741901] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 1.854405] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.864075] fbcon: inteldrmfb (fb0) is primary device
[ 1.864182] Console: switching to colour frame buffer device 170x48
[ 1.864215] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.866397] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.974428] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.974469] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.975785] ata1.00: ATA-8: Hitachi HTS543232A7A384, ES2OA60W, max UDMA/100
[ 1.975791] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.977296] ata1.00: configured for UDMA/100
[ 1.977743] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 A60W PQ: 0 ANSI: 5
[ 1.977911] ata2.00: ATAPI: hp DVDRAM GT50N, MP00, max UDMA/100
[ 1.978295] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.978338] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.978378] sd 0:0:0:0: [sda] Write Protect is off
[ 1.978382] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.978414] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.980851] ata2.00: configured for UDMA/100
[ 1.985268] scsi 1:0:0:0: CD-ROM hp DVDRAM GT50N MP00 PQ: 0 ANSI: 5
[ 1.987144] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.987150] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.987555] hub 1-1:1.0: USB hub found
[ 1.987726] hub 1-1:1.0: 6 ports detected
[ 1.998754] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.998762] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.999194] hub 2-1:1.0: USB hub found
[ 1.999319] hub 2-1:1.0: 8 ports detected
[ 2.006842] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.006848] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.007144] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.007312] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.040564] sda: sda1 sda2 < sda5 sda6 >
[ 2.041665] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.258430] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 2.396276] usb 1-1.3: New USB device found, idVendor=05c8, idProduct=021e
[ 2.396283] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.396286] usb 1-1.3: Product: HP Webcam-101
[ 2.396289] usb 1-1.3: Manufacturer: HP Webcam-101
[ 2.396291] usb 1-1.3: SerialNumber: HP Webcam-101
[ 2.474476] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[ 2.486406] tsc: Refined TSC clocksource calibration: 2394.000 MHz
[ 2.486415] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22821391a86, max_idle_ns: 440795325644 ns
[ 2.513278] psmouse serio1: synaptics: queried max coordinates: x [..5634], y [..4598]
[ 2.567439] usb 1-1.4: New USB device found, idVendor=03f0, idProduct=311d
[ 2.567449] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.591599] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1680, fw id: 706145
[ 2.640191] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.715994] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 3.448258] random: nonblocking pool is initialized
[ 3.486825] clocksource: Switched to clocksource tsc
[ 4.000190] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 4.000337] systemd[1]: Detected architecture x86-64.
[ 4.013805] systemd[1]: Set hostname to <smail-HP-630-Notebook-PC>.
[ 5.888535] systemd[1]: Created slice System Slice.
[ 5.888654] systemd[1]: Created slice system-getty.slice.
[ 5.888703] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.888748] systemd[1]: Listening on udev Control Socket.
[ 5.888779] systemd[1]: Listening on udev Kernel Socket.
[ 5.888811] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.888826] systemd[1]: Reached target User and Group Name Lookups.
[ 5.888862] systemd[1]: Listening on Journal Socket.
[ 5.902762] systemd[1]: Started Braille Device Support.
[ 5.903422] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.014807] systemd[1]: Starting Load Kernel Modules...
[ 6.015284] systemd[1]: Mounting Debug File System...
[ 6.015760] systemd[1]: Starting Uncomplicated firewall...
[ 6.015820] systemd[1]: Reached target Remote File Systems (Pre).
[ 6.015845] systemd[1]: Reached target Remote File Systems.
[ 6.016020] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.016084] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 6.016148] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.016658] systemd[1]: Mounting Huge Pages File System...
[ 6.016759] systemd[1]: Listening on Journal Audit Socket.
[ 6.016860] systemd[1]: Created slice User and Session Slice.
[ 6.016884] systemd[1]: Reached target Slices.
[ 6.017378] systemd[1]: Started Read required files in advance.
[ 6.017468] systemd[1]: Reached target Encrypted Volumes.
[ 6.017538] systemd[1]: Listening on Syslog Socket.
[ 6.018116] systemd[1]: Starting Journal Service...
[ 6.086811] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 6.163184] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 6.174876] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 6.336506] systemd[1]: Started Uncomplicated firewall.
[ 6.453992] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.454032] systemd[1]: Mounted Huge Pages File System.
[ 6.454049] systemd[1]: Mounted Debug File System.
[ 6.617449] systemd[1]: Started Journal Service.
[ 6.661455] lp: driver loaded but no devices found
[ 6.707252] ppdev: user-space parallel port driver
[ 9.519073] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 9.719278] systemd-journald[245]: Received request to flush runtime journal from PID 1
[ 10.443703] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[ 10.443714] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.443719] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 10.443725] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.443727] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 10.443733] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.443735] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 10.443740] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.443742] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.569705] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.039277] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 11.645062] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 11.654716] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[ 11.654722] ACPI Error: Method parse/execution failed [\_SB.WMID.HWCD] (Node ffff8801b50c47d0), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 11.654731] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff8801b50c6028), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 11.654961] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[ 11.654969] ACPI Error: Method parse/execution failed [\_SB.WMID.HWCD] (Node ffff8801b50c47d0), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 11.654980] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff8801b50c6028), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 11.971871] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[ 11.971879] ACPI Error: Method parse/execution failed [\_SB.WMID.HWCD] (Node ffff8801b50c47d0), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 11.971889] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff8801b50c6028), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 11.980982] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[ 11.980989] ACPI Error: Method parse/execution failed [\_SB.WMID.HWCD] (Node ffff8801b50c47d0), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 11.981001] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff8801b50c6028), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 12.052138] Bluetooth: Core ver 2.21
[ 12.052168] NET: Registered protocol family 31
[ 12.052170] Bluetooth: HCI device and connection manager initialized
[ 12.052176] Bluetooth: HCI socket layer initialized
[ 12.052180] Bluetooth: L2CAP socket layer initialized
[ 12.052195] Bluetooth: SCO socket layer initialized
[ 12.063300] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC270: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 12.063305] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.063309] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 12.063311] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 12.063314] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 12.063317] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 12.063320] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 12.080786] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 12.080908] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 12.081015] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.322558] usbcore: registered new interface driver btusb
[ 12.492733] ath: phy0: ASPM enabled: 0x43
[ 12.492739] ath: EEPROM regdomain: 0x60
[ 12.492741] ath: EEPROM indicates we should expect a direct regpair map
[ 12.492743] ath: Country alpha2 being used: 00
[ 12.492744] ath: Regpair used: 0x60
[ 12.561867] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.562238] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90001060000, irq=18
[ 12.606481] ath9k 0000:02:00.0 wlo1: renamed from wlan0
[ 12.906053] usbcore: registered new interface driver ath3k
[ 13.049065] usb 1-1.4: USB disconnect, device number 4
[ 13.312800] cfg80211: World regulatory domain updated:
[ 13.312805] cfg80211: DFS Master region: unset
[ 13.312807] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 13.312810] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.312812] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.312813] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.312815] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 13.312817] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 13.312819] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 13.312821] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.312822] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 13.327999] media: Linux media interface: v0.10
[ 13.376655] Linux video capture interface: v2.00
[ 13.399138] Adding 975868k swap on /dev/sda1. Priority:-1 extents:1 across:975868k FS
[ 13.502924] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
[ 13.595980] usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=3005
[ 13.595989] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 13.837140] uvcvideo: Found UVC 1.00 device HP Webcam-101 (05c8:021e)
[ 13.852530] input: HP Webcam-101 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11
[ 13.852655] usbcore: registered new interface driver uvcvideo
[ 13.852657] USB Video Class driver (1.1.1)
[ 14.643034] audit: type=1400 audit(1466161130.558:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=662 comm="apparmor_parser"
[ 14.864243] audit: type=1400 audit(1466161130.778:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=658 comm="apparmor_parser"
[ 14.864255] audit: type=1400 audit(1466161130.778:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=658 comm="apparmor_parser"
[ 14.898879] audit: type=1400 audit(1466161130.810:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=659 comm="apparmor_parser"
[ 14.898891] audit: type=1400 audit(1466161130.810:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=659 comm="apparmor_parser"
[ 14.898898] audit: type=1400 audit(1466161130.810:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=659 comm="apparmor_parser"
[ 14.898904] audit: type=1400 audit(1466161130.810:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=659 comm="apparmor_parser"
[ 14.942892] audit: type=1400 audit(1466161130.854:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=664 comm="apparmor_parser"
[ 15.166870] audit: type=1400 audit(1466161131.078:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=665 comm="apparmor_parser"
[ 15.166882] audit: type=1400 audit(1466161131.078:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=665 comm="apparmor_parser"
[ 18.662498] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.662502] Bluetooth: BNEP filters: protocol multicast
[ 18.662508] Bluetooth: BNEP socket layer initialized
[ 25.332472] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 25.337169] vboxdrv: Found 4 processor cores
[ 25.355946] vboxdrv: TSC mode is Invariant, tentative frequency 2393996516 Hz
[ 25.355949] vboxdrv: Successfully loaded version 5.0.18_Ubuntu (interface 0x00240000)
[ 25.411168] VBoxNetFlt: Successfully started.
[ 25.422860] VBoxNetAdp: Successfully started.
[ 25.442684] VBoxPciLinuxInit
[ 25.502210] vboxpci: IOMMU not found (not registered)
[ 32.143922] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[ 32.143930] ACPI Error: Method parse/execution failed [\_SB.WMID.HWCD] (Node ffff8801b50c47d0), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 32.143941] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff8801b50c6028), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 41.054236] Bluetooth: RFCOMM TTY layer initialized
[ 41.054247] Bluetooth: RFCOMM socket layer initialized
[ 41.054252] Bluetooth: RFCOMM ver 1.11Hors ligne
#7 Le 17/06/2016, à 13:26
- kholo
Re : Ubuntu 16.04 LTS démarrage/extinction trop lente
démarrage: +50s ... bon avec un HDD c'est bon
extinction: + 1min 30s
1mn 30sec pour éteindre, c'est Windowsien... 15 à 20 sec serait plus une durée normale.
quelques retours de dmesg :
[ 6.707252] ppdev: user-space parallel port driver
[ 9.519073] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 9.719278] systemd-journald[245]: Received request to flush runtime journal from PID 1
[ 10.443703] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)[ 11.654716] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[ 11.654722] ACPI Error: Method parse/execution failed [\_SB.WMID.HWCD] (Node ffff8801b50c47d0), AE_AML_BUFFER_LIMIT (20150930/psparse-542)[ 32.143922] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[ 32.143930] ACPI Error: Method parse/execution failed [\_SB.WMID.HWCD] (Node ffff8801b50c47d0), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 32.143941] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff8801b50c6028), AE_AML_BUFFER_LIMIT (20150930/psparse-542)[ 41.054236] Bluetooth: RFCOMM TTY layer initialized
[ 41.054247] Bluetooth: RFCOMM socket layer initialized
[ 41.054252] Bluetooth: RFCOMM ver 1.11pas mal d'erreurs avec l'ACPI et le bluetooth qui prend son temps
le noyau doit être un peu jeune sur la 16.04 pour ta machine.
+1 pour Malbo
sinon fait des mises à jours régulières et regarde les temps d'allumage et d'extinction
Hors ligne