#1 Le 07/10/2016, à 17:09
- Coeur Noir
dmesg rempli de : reset high-speed USB [ à peu près résolu ]
Hello,
Ubuntu 14.04 ici, depuis longtemps ( peut-être pas dès l'installation, quoi que… ) je remarque un message récurrent dans dmesg :
[ 108.420918] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 327.735638] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 565.822922] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 819.270695] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 841.111393] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1467.814608] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1572.269808] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1751.651292] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1852.518413] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1886.639447] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 2090.605680] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 2252.734677] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 2367.606196] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 2511.482633] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 2567.104328] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 2671.575522] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 2752.642028] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 2937.483669] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 3090.412373] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 3247.073174] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 3299.306779] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 3508.197194] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 3717.091565] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 3978.251607] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 4030.457198] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 4091.051073] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 4448.774038] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 4553.229219] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 4762.123630] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 4918.804443] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 5075.473249] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 5284.375651] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 5493.294045] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 5649.958864] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 5754.418076] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 5911.090871] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 5963.328474] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 6086.376246] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 6120.517294] usb 1-1.2: reset high-speed USB device number 4 using ehci-pciD'un jour à l'autre - d'un démarrage à l'autre devrais-je dire plutôt - le device number change, là c'est 4 des fois c'est 2, 3…
Je ne remarque pas de problème à l'usage de mon pc - si ce n'est l'impossibilité de lire la carte mémoire SDHC HighSpeed d'un appareil photo nikon. D'autres cartes mémoires cependant sont lues sans problème ( des microSD non HC de phones ou tablettes ).
Sauriez-vous me dire à quoi ça correspond ? Un réglage à faire dans le bios concernant la prise en charge des connectiques USB ( c'est de voir ehci-pci qui me font songer à ça ) ?
Le début du ( long ) dmesg au cas où :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-38-generic (buildd@lgw01-22) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #57~14.04.1-Ubuntu SMP Tue Sep 6 17:20:43 UTC 2016 (Ubuntu 4.4.0-38.57~14.04.1-generic 4.4.19)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-38-generic root=UUID=a7428baa-93fd-48e8-922d-637da9044d2f ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9795fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9796000-0x00000000b979cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b979d000-0x00000000b9be5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9be6000-0x00000000ba02cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba02d000-0x00000000cc66cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cc66d000-0x00000000cc874fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cc875000-0x00000000cc88afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cc88b000-0x00000000ccdcbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ccdcc000-0x00000000cdffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cdfff000-0x00000000cdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUS All Series/Z87-C, BIOS 1007 05/17/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 4 base 00CF000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 041FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 16GB, type WB
[ 0.000000] reg 1, base: 16GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 4, base: 3312MB, range: 16MB, type UC
[ 0.000000] reg 5, base: 16894MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 16110M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3312MB, range: 16MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 5, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 6, base: 16GB, range: 512MB, type WB
[ 0.000000] reg 7, base: 16894MB, range: 2MB, type UC
[ 0.000000] e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd890-0x000fd89f] mapped at [ffff8800000fd890]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[ 0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[ 0.000000] BRK [0x02206000, 0x02206fff] PGTABLE
[ 0.000000] BRK [0x02207000, 0x02207fff] PGTABLE
[ 0.000000] BRK [0x02208000, 0x02208fff] PGTABLE
[ 0.000000] BRK [0x02209000, 0x02209fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3416a000-0x360acfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CC879078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CC885B28 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CC879180 00C9A1 (v02 ALASKA A M I 00000024 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000CCDCA080 000040
[ 0.000000] ACPI: APIC 0x00000000CC885C38 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CC885CD0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CC885D18 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000CC886258 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000CC886D30 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CC886D70 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CC886DA8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000CC887118 00329E (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41fdf6000-0x41fdfafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b9795fff]
[ 0.000000] node 0: [mem 0x00000000b979d000-0x00000000b9be5fff]
[ 0.000000] node 0: [mem 0x00000000ba02d000-0x00000000cc66cfff]
[ 0.000000] node 0: [mem 0x00000000cdfff000-0x00000000cdffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
[ 0.000000] On node 0 totalpages: 4112316
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13001 pages used for memmap
[ 0.000000] DMA32 zone: 832032 pages, LIFO batch:31
[ 0.000000] Normal zone: 51192 pages used for memmap
[ 0.000000] Normal zone: 3276288 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcf200000-0xdf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9796000-0xb979cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9be6000-0xba02cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc66d000-0xcc874fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc875000-0xcc88afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc88b000-0xccdcbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xccdcc000-0xcdffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce000000-0xceffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88041fa00000 s98008 r8192 d28968 u262144
[ 0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4048038
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-38-generic root=UUID=a7428baa-93fd-48e8-922d-637da9044d2f ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16073248K/16449264K available (8187K kernel code, 1292K rwdata, 3960K rodata, 1484K init, 1292K bss, 376016K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:488 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3497.865 MHz processor
[ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 6995.73 BogoMIPS (lpj=13991460)
[ 0.000022] pid_max: default: 32768 minimum: 301
[ 0.000026] ACPI: Core revision 20150930
[ 0.006540] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.006553] Security Framework initialized
[ 0.006554] Yama: becoming mindful.
[ 0.006565] AppArmor: AppArmor initialized
[ 0.007213] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.009369] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010324] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.010336] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.010518] Initializing cgroup subsys io
[ 0.010521] Initializing cgroup subsys memory
[ 0.010525] Initializing cgroup subsys devices
[ 0.010527] Initializing cgroup subsys freezer
[ 0.010528] Initializing cgroup subsys net_cls
[ 0.010530] Initializing cgroup subsys perf_event
[ 0.010531] Initializing cgroup subsys net_prio
[ 0.010534] Initializing cgroup subsys hugetlb
[ 0.010535] Initializing cgroup subsys pids
[ 0.010551] CPU: Physical Processor ID: 0
[ 0.010552] CPU: Processor Core ID: 0
[ 0.010555] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.010555] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.011289] mce: CPU supports 9 MCE banks
[ 0.011299] CPU0: Thermal monitoring enabled (TM1)
[ 0.011307] process: using mwait in idle threads
[ 0.011309] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.011310] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.011548] Freeing SMP alternatives memory: 28K (ffffffff820b8000 - ffffffff820bf000)
[ 0.022375] ftrace: allocating 32041 entries in 126 pages
[ 0.031672] smpboot: Max logical packages: 2
[ 0.031673] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.032029] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071714] TSC deadline timer enabled
[ 0.071716] smpboot: CPU0: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.071728] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.071741] ... version: 3
[ 0.071742] ... bit width: 48
[ 0.071742] ... generic registers: 4
[ 0.071743] ... value mask: 0000ffffffffffff
[ 0.071743] ... max period: 0000ffffffffffff
[ 0.071744] ... fixed-purpose events: 3
[ 0.071744] ... event mask: 000000070000000f
[ 0.072318] x86: Booting SMP configuration:
[ 0.072319] .... node #0, CPUs: #1
[ 0.075475] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.075523] #2 #3 #4 #5 #6 #7
[ 0.094388] x86: Booted up 1 node, 8 CPUs
[ 0.094391] smpboot: Total of 8 processors activated (55965.84 BogoMIPS)
[ 0.101069] devtmpfs: initialized
[ 0.103057] evm: security.selinux
[ 0.103058] evm: security.SMACK64
[ 0.103059] evm: security.SMACK64EXEC
[ 0.103059] evm: security.SMACK64TRANSMUTE
[ 0.103060] evm: security.SMACK64MMAP
[ 0.103060] evm: security.ima
[ 0.103061] evm: security.capability
[ 0.103098] PM: Registering ACPI NVS region [mem 0xb9796000-0xb979cfff] (28672 bytes)
[ 0.103099] PM: Registering ACPI NVS region [mem 0xcc88b000-0xccdcbfff] (5509120 bytes)
[ 0.103197] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.103255] pinctrl core: initialized pinctrl subsystem
[ 0.103332] RTC time: 9:58:03, date: 10/07/16
[ 0.103411] NET: Registered protocol family 16
[ 0.112971] cpuidle: using governor ladder
[ 0.124961] cpuidle: using governor menu
[ 0.124963] PCCT header not found.
[ 0.125016] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.125017] ACPI: bus type PCI registered
[ 0.125018] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.125068] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.125069] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.125076] PCI: Using configuration type 1 for base access
[ 0.125099] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.137198] ACPI: Added _OSI(Module Device)
[ 0.137199] ACPI: Added _OSI(Processor Device)
[ 0.137200] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.137201] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.139358] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.140872] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.141148] ACPI: Dynamic OEM Table Load:
[ 0.141152] ACPI: SSDT 0xFFFF88040D019400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.141545] ACPI: Dynamic OEM Table Load:
[ 0.141548] ACPI: SSDT 0xFFFF88040D472000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.141963] ACPI: Dynamic OEM Table Load:
[ 0.141965] ACPI: SSDT 0xFFFF88040D009800 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.142959] ACPI : EC: EC started
[ 0.142968] ACPI: Interpreter enabled
[ 0.142972] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.142975] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.142985] ACPI: (supports S0 S3 S4 S5)
[ 0.142986] ACPI: Using IOAPIC for interrupt routing
[ 0.143000] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.148048] ACPI: Power Resource [FN00] (off)
[ 0.148094] ACPI: Power Resource [FN01] (off)
[ 0.148140] ACPI: Power Resource [FN02] (off)
[ 0.148183] ACPI: Power Resource [FN03] (off)
[ 0.148226] ACPI: Power Resource [FN04] (off)
[ 0.148723] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.148726] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.148820] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.148893] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.148894] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.149125] PCI host bridge to bus 0000:00
[ 0.149127] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.149128] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.149129] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.149130] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.149131] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.149131] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.149132] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.149133] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.149134] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.149135] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.149136] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.149141] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.149198] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.149221] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.149274] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.149301] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.149310] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.149314] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.149317] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.149366] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.149374] pci 0000:00:03.0: reg 0x10: [mem 0xf7e04000-0xf7e07fff 64bit]
[ 0.149443] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.149465] pci 0000:00:16.0: reg 0x10: [mem 0xf7e0e000-0xf7e0e00f 64bit]
[ 0.149509] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.149561] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.149584] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e0c000-0xf7e0c3ff]
[ 0.149644] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.149678] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.149702] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.149722] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e00000-0xf7e03fff 64bit]
[ 0.149770] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.149797] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.149820] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.149871] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.149916] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.149939] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.149991] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.150035] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.150057] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[ 0.150109] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.150152] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.150178] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 0.150230] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.150273] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.150298] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.150321] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e0b000-0xf7e0b3ff]
[ 0.150382] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.150415] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.150440] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
[ 0.150567] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.150584] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.150589] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.150595] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.150600] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.150606] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.150611] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e0a000-0xf7e0a7ff]
[ 0.150633] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.150675] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.150688] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e09000-0xf7e090ff 64bit]
[ 0.150704] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.150777] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.150819] acpiphp: Slot [1] registered
[ 0.150822] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.150876] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.150912] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.150938] pci 0000:03:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit]
[ 0.150954] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.151020] pci 0000:03:00.0: supports D1 D2
[ 0.151021] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.151055] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.156985] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.156988] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.156990] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.156994] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.157036] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[ 0.157126] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.157145] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
[ 0.157152] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.157153] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.157154] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.157155] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.157155] pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.157156] pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.157157] pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.157158] pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.157159] pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.157160] pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.157246] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.157262] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.157263] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.157264] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.157265] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.157266] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.157267] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.157269] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.157270] pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.157271] pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.157271] pci 0000:04:00.0: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.157330] pci 0000:06:00.0: [168c:002e] type 00 class 0x028000
[ 0.157368] pci 0000:06:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 0.157465] pci 0000:06:00.0: supports D1
[ 0.157466] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[ 0.157497] pci 0000:06:00.0: System wakeup disabled by ACPI
[ 0.164988] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.164992] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.165481] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.165510] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.165537] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.165564] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.165590] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.165616] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.165643] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.165669] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.165884] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.165903] ACPI : EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
[ 0.165968] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.165969] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.165970] vgaarb: loaded
[ 0.165971] vgaarb: bridge control possible 0000:00:02.0
[ 0.166107] SCSI subsystem initialized
[ 0.166128] libata version 3.00 loaded.
[ 0.166142] ACPI: bus type USB registered
[ 0.166151] usbcore: registered new interface driver usbfs
[ 0.166156] usbcore: registered new interface driver hub
[ 0.166168] usbcore: registered new device driver usb
[ 0.166247] PCI: Using ACPI for IRQ routing
[ 0.167383] PCI: pci_cache_line_size set to 64 bytes
[ 0.167417] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.167418] e820: reserve RAM buffer [mem 0xb9796000-0xbbffffff]
[ 0.167419] e820: reserve RAM buffer [mem 0xb9be6000-0xbbffffff]
[ 0.167419] e820: reserve RAM buffer [mem 0xcc66d000-0xcfffffff]
[ 0.167420] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[ 0.167421] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[ 0.167492] NetLabel: Initializing
[ 0.167493] NetLabel: domain hash size = 128
[ 0.167494] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.167501] NetLabel: unlabeled traffic allowed by default
[ 0.167539] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.167542] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.169552] amd_nb: Cannot enumerate AMD northbridges
[ 0.169563] clocksource: Switched to clocksource hpet
[ 0.173186] AppArmor: AppArmor Filesystem Enabled
[ 0.173216] pnp: PnP ACPI init
[ 0.173261] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.173263] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.173356] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.173358] system 00:01: [io 0xffff] has been reserved
[ 0.173359] system 00:01: [io 0xffff] has been reserved
[ 0.173360] system 00:01: [io 0xffff] has been reserved
[ 0.173361] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.173361] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.173362] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.173363] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.173364] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.173365] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.173367] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.173381] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.173407] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.173409] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.173456] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.173458] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.173485] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.173487] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.173625] pnp 00:06: [dma 0 disabled]
[ 0.173652] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.173676] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.173919] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.173920] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.173921] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.173922] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.173923] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.173925] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.173926] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.173927] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.173928] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.173929] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.173930] system 00:08: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.173931] system 00:08: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.173932] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.174078] pnp: PnP ACPI: found 9 devices
[ 0.179673] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.179709] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.179713] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.179721] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.179723] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.179726] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.179728] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.179732] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.179748] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[ 0.179755] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.179758] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.179764] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.179765] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.179766] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.179767] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.179768] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.179769] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.179770] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.179771] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.179772] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.179773] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.179774] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.179775] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.179776] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.179777] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.179778] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.179778] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.179779] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.179780] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.179781] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.179782] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.179783] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.179784] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.179785] pci_bus 0000:04: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.179786] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.179787] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.179787] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.179788] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.179789] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.179790] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.179791] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.179792] pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.179793] pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.179794] pci_bus 0000:05: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.179795] pci_bus 0000:06: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.179814] NET: Registered protocol family 2
[ 0.179921] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.180058] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.180170] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.180189] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.180224] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.180284] NET: Registered protocol family 1
[ 0.180293] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.180475] PCI: CLS 64 bytes, default 64
[ 0.180504] Trying to unpack rootfs image as initramfs...
[ 0.492422] Freeing initrd memory: 32012K (ffff88003416a000 - ffff8800360ad000)
[ 0.492431] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.492433] software IO TLB [mem 0xc866d000-0xcc66d000] (64MB) mapped at [ffff8800c866d000-ffff8800cc66cfff]
[ 0.492487] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.492488] hw unit of domain pp0-core 2^-14 Joules
[ 0.492489] hw unit of domain package 2^-14 Joules
[ 0.492489] hw unit of domain dram 2^-14 Joules
[ 0.492490] hw unit of domain pp1-gpu 2^-14 Joules
[ 0.492614] Scanning for low memory corruption every 60 seconds
[ 0.492843] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.492872] audit: initializing netlink subsys (disabled)
[ 0.492882] audit: type=2000 audit(1475834283.484:1): initialized
[ 0.493164] Initialise system trusted keyring
[ 0.493248] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.493249] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.494093] zbud: loaded
[ 0.494218] VFS: Disk quotas dquot_6.6.0
[ 0.494237] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.494387] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.494524] fuse init (API version 7.23)
[ 0.494600] Key type big_key registered
[ 0.494611] Allocating IMA MOK and blacklist keyrings.
[ 0.494863] Key type asymmetric registered
[ 0.494865] Asymmetric key parser 'x509' registered
[ 0.494885] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.494912] io scheduler noop registered
[ 0.494914] io scheduler deadline registered (default)
[ 0.494931] io scheduler cfq registered
[ 0.495280] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.495284] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.495301] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.495301] vesafb: scrolling: redraw
[ 0.495302] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.495310] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90002000000, using 8128k, total 8128k
[ 0.495372] Console: switching to colour frame buffer device 240x67
[ 0.495386] fb0: VESA VGA frame buffer device
[ 0.495394] intel_idle: MWAIT substates: 0x42120
[ 0.495395] intel_idle: v0.4.1 model 0x3C
[ 0.495396] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.495621] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.495624] ACPI: Power Button [PWRB]
[ 0.495644] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.495646] ACPI: Power Button [PWRF]
[ 0.496098] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.496099] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.496231] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.496232] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.496255] GHES: HEST is not enabled!
[ 0.496318] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.516676] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.517601] Linux agpgart interface v0.103
[ 0.519531] brd: module loaded
[ 0.520341] loop: module loaded
[ 0.520471] libphy: Fixed MDIO Bus: probed
[ 0.520473] tun: Universal TUN/TAP device driver, 1.6
[ 0.520474] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.520498] PPP generic driver version 2.4.2
[ 0.520532] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.520535] ehci-pci: EHCI PCI platform driver
[ 0.520596] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.520600] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.520608] ehci-pci 0000:00:1a.0: debug port 2
[ 0.524502] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.524510] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7e0c000
[ 0.533585] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.533617] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.533618] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.533619] usb usb1: Product: EHCI Host Controller
[ 0.533620] usb usb1: Manufacturer: Linux 4.4.0-38-generic ehci_hcd
[ 0.533621] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.533704] hub 1-0:1.0: USB hub found
[ 0.533707] hub 1-0:1.0: 2 ports detected
[ 0.533842] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.533846] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.533854] ehci-pci 0000:00:1d.0: debug port 2
[ 0.537746] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.537752] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e0b000
[ 0.549611] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.549627] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.549628] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.549629] usb usb2: Product: EHCI Host Controller
[ 0.549630] usb usb2: Manufacturer: Linux 4.4.0-38-generic ehci_hcd
[ 0.549631] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.549707] hub 2-0:1.0: USB hub found
[ 0.549709] hub 2-0:1.0: 2 ports detected
[ 0.549777] ehci-platform: EHCI generic platform driver
[ 0.549785] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.549788] ohci-pci: OHCI PCI platform driver
[ 0.549795] ohci-platform: OHCI generic platform driver
[ 0.549800] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.549837] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.549837] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.550459] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.550552] mousedev: PS/2 mouse device common for all mice
[ 0.550677] rtc_cmos 00:02: RTC can wake from S4
[ 0.550791] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.550811] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.550816] i2c /dev entries driver
[ 0.550847] device-mapper: uevent: version 1.0.3
[ 0.550897] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.550911] Intel P-state driver initializing.
[ 0.551098] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.551994] NET: Registered protocol family 10
[ 0.552447] NET: Registered protocol family 17
[ 0.552484] Key type dns_resolver registered
[ 0.553145] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
[ 0.553189] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
[ 0.553233] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
[ 0.553247] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
[ 0.553275] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x9
[ 0.553304] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x9
[ 0.553329] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x9
[ 0.553350] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x9
[ 0.553456] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.553857] registered taskstats version 1
[ 0.553902] Loading compiled-in X.509 certificates
[ 0.556104] Loaded X.509 cert 'Build time autogenerated kernel key: 777c07dab68ea2292bef256283d37f42a58bcbe2'
[ 0.556158] zswap: loaded using pool lzo/zbud
[ 0.558567] Key type trusted registered
[ 0.561361] Key type encrypted registered
[ 0.561365] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.561368] ima: No TPM chip found, activating TPM-bypass!
[ 0.561379] evm: HMAC attrs: 0x1
[ 0.561762] Magic number: 4:944:979
[ 0.561875] rtc_cmos 00:02: setting system clock to 2016-10-07 09:58:04 UTC (1475834284)
[ 0.561935] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.561936] EDD information not available.
[ 0.561984] PM: Hibernation image not present or could not be loaded.
[ 0.562543] Freeing unused kernel memory: 1484K (ffffffff81f45000 - ffffffff820b8000)
[ 0.562544] Write protecting the kernel read-only data: 14336k
[ 0.562883] Freeing unused kernel memory: 2040K (ffff880001802000 - ffff880001a00000)
[ 0.563140] Freeing unused kernel memory: 136K (ffff880001dde000 - ffff880001e00000)
[ 0.569935] systemd-udevd[155]: starting version 204
[ 0.572254] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.576965] wmi: Mapper loaded
[ 0.576967] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.583946] ahci 0000:00:1f.2: version 3.0
[ 0.584097] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x35 impl SATA mode
[ 0.584099] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.584144] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.584148] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.585965] [drm] Initialized drm 1.1.0 20060810
[ 0.590449] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90001b90000, 74:d0:2b:9e:fb:40, XID 0c000800 IRQ 26
[ 0.590451] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.610058] scsi host0: ahci
[ 0.610186] scsi host1: ahci
[ 0.610305] scsi host2: ahci
[ 0.610386] scsi host3: ahci
[ 0.610455] scsi host4: ahci
[ 0.610510] scsi host5: ahci
[ 0.610536] ata1: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a100 irq 25
[ 0.610537] ata2: DUMMY
[ 0.610539] ata3: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a200 irq 25
[ 0.610540] ata4: DUMMY
[ 0.610541] ata5: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a300 irq 25
[ 0.610542] ata6: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a380 irq 25
[ 0.610933] [drm] Memory usable by graphics device = 2048M
[ 0.610935] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 0.610936] fb: switching to inteldrmfb from VESA VGA
[ 0.610954] Console: switching to colour dummy device 80x25
[ 0.610994] [drm] Replacing VGA console driver
[ 0.617176] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.617177] [drm] Driver supports precise vblank timestamp query.
[ 0.617552] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.845622] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.861626] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.929650] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.929666] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.929783] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.929787] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff88040f4e0618), AE_NOT_FOUND (20150930/psparse-542)
[ 0.929845] ata5.00: READ LOG DMA EXT failed, trying unqueued
[ 0.929865] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.929866] ata5.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB0Q, max UDMA/133
[ 0.929868] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.930000] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.930003] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff88040f4e0618), AE_NOT_FOUND (20150930/psparse-542)
[ 0.930059] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.930062] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff88040f4e0690), AE_NOT_FOUND (20150930/psparse-542)
[ 0.930088] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.930090] ata5.00: configured for UDMA/133
[ 0.930202] ata6.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[ 0.930203] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.930625] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.930627] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff88040f4e0690), AE_NOT_FOUND (20150930/psparse-542)
[ 0.930761] ata6.00: configured for UDMA/133
[ 0.933600] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.933613] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.934326] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.934328] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88040f4e0528), AE_NOT_FOUND (20150930/psparse-542)
[ 0.934597] ata3.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3MA, max UDMA/133
[ 0.934599] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.935249] ata1.00: ATAPI: ATAPI iHAS124 Y, BL0V, max UDMA/100
[ 0.935494] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.935497] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88040f4e0528), AE_NOT_FOUND (20150930/psparse-542)
[ 0.935805] ata3.00: configured for UDMA/133
[ 0.937134] ata1.00: configured for UDMA/100
[ 0.938943] scsi 0:0:0:0: CD-ROM ATAPI iHAS124 Y BL0V PQ: 0 ANSI: 5
[ 0.955199] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.955201] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.955314] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.955388] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.955628] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72101 A3MA PQ: 0 ANSI: 5
[ 0.955856] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 0.955858] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 0.955932] sd 2:0:0:0: [sda] Write Protect is off
[ 0.955935] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.955958] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.955977] scsi 4:0:0:0: Direct-Access ATA Samsung SSD 840 BB0Q PQ: 0 ANSI: 5
[ 0.956076] sd 4:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 0.956102] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 0.956102] sd 4:0:0:0: [sdb] Write Protect is off
[ 0.956104] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.956112] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.956218] scsi 5:0:0:0: Direct-Access ATA WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[ 0.956321] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 0.956322] sd 5:0:0:0: [sdc] 4096-byte physical blocks
[ 0.956330] sdb: sdb1 sdb2 sdb3
[ 0.956332] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 0.956378] sd 5:0:0:0: [sdc] Write Protect is off
[ 0.956380] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 0.956397] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.956486] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 0.963871] sda: sda1 sda2
[ 0.964177] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.981964] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 0.981966] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.982227] hub 1-1:1.0: USB hub found
[ 0.982338] hub 1-1:1.0: 6 ports detected
[ 0.993973] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 0.993974] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.994220] hub 2-1:1.0: USB hub found
[ 0.994323] hub 2-1:1.0: 8 ports detected
[ 1.008748] sdc: sdc1 sdc2 < sdc5 >
[ 1.009224] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 1.069697] fbcon: inteldrmfb (fb0) is primary device
[ 1.069742] Console: switching to colour frame buffer device 240x67
[ 1.069758] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.071456] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.071727] acpi device:62: registered as cooling_device13
[ 1.071778] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.071892] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 1.253643] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[ 1.265618] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.360962] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c52f
[ 1.360964] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.360965] usb 2-1.1: Product: USB Receiver
[ 1.360966] usb 2-1.1: Manufacturer: Logitech
[ 1.363569] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.367135] usbcore: registered new interface driver usbhid
[ 1.367137] usbhid: USB HID core driver
[ 1.368076] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C52F.0001/input/input4
[ 1.368143] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0
[ 1.368881] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C52F.0002/input/input5
[ 1.373614] usb 1-1.2: device descriptor read/64, error -71
[ 1.421723] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1
[ 1.493611] tsc: Refined TSC clocksource calibration: 3497.972 MHz
[ 1.493630] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x326bd592a83, max_idle_ns: 440795311901 ns
[ 1.597647] usb 1-1.2: device descriptor read/64, error -71
[ 1.758077] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.773673] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 2.064683] random: init: uninitialized urandom read (12 bytes read, 120 bits of entropy available)
[ 2.136874] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0158
[ 2.136876] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.136877] usb 1-1.2: Product: USB2.0-CRW
[ 2.136878] usb 1-1.2: Manufacturer: Generic
[ 2.136879] usb 1-1.2: SerialNumber: 20060413092100000
[ 2.212912] random: nonblocking pool is initialized
[ 2.493759] clocksource: Switched to clocksource tsc
[ 3.650346] Adding 760828k swap on /dev/sdc5. Priority:-1 extents:1 across:760828k FS
[ 3.677434] systemd-udevd[423]: starting version 204
[ 3.700422] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.702802] lp: driver loaded but no devices found
[ 3.712300] ppdev: user-space parallel port driver
[ 3.737726] usbcore: registered new interface driver usb-storage
[ 3.738971] usbcore: registered new interface driver uas
[ 3.740854] ums-realtek 1-1.2:1.0: USB Mass Storage device detected
[ 3.743666] AVX2 version of gcm_enc/dec engaged.
[ 3.743668] AES CTR mode by8 optimization enabled
[ 3.747993] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.748223] scsi host6: usb-storage 1-1.2:1.0
[ 3.748302] usbcore: registered new interface driver ums-realtek
[ 3.766976] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 3.766979] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.766981] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.766983] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.766984] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
[ 3.766986] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.766988] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 3.766990] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 3.766991] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 3.782244] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[ 3.782336] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 3.782411] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 3.782483] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 3.782535] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 3.782602] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 3.782669] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 3.782721] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 3.784060] audit: type=1400 audit(1475834287.715:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=566 comm="apparmor_parser"
[ 3.784065] audit: type=1400 audit(1475834287.715:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=566 comm="apparmor_parser"
[ 3.784069] audit: type=1400 audit(1475834287.715:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=566 comm="apparmor_parser"
[ 3.784419] audit: type=1400 audit(1475834287.715:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=566 comm="apparmor_parser"
[ 3.784424] audit: type=1400 audit(1475834287.715:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=566 comm="apparmor_parser"
[ 3.784612] audit: type=1400 audit(1475834287.715:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=566 comm="apparmor_parser"
[ 3.786497] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 3.786564] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 3.787686] kvm: disabled by bios
[ 3.791337] intel_rapl: Found RAPL domain package
[ 3.791342] intel_rapl: Found RAPL domain core
[ 3.791343] intel_rapl: Found RAPL domain uncore
[ 3.791346] intel_rapl: Found RAPL domain dram
[ 3.803621] asus_wmi: ASUS WMI generic driver loaded
[ 3.804878] asus_wmi: Initialization: 0x0
[ 3.804901] asus_wmi: BIOS WMI version: 0.9
[ 3.805330] asus_wmi: SFUN value: 0x0
[ 3.805630] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input16
[ 3.805725] asus_wmi: Number of fans: 1
[ 3.836001] cfg80211: World regulatory domain updated:
[ 3.836003] cfg80211: DFS Master region: unset
[ 3.836004] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3.836006] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.836007] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.836007] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.836008] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.836009] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.857980] ath: EEPROM regdomain: 0x809c
[ 3.857982] ath: EEPROM indicates we should expect a country code
[ 3.857983] ath: doing EEPROM country->regdmn map search
[ 3.857984] ath: country maps to regdmn code: 0x52
[ 3.857985] ath: Country alpha2 being used: CN
[ 3.857985] ath: Regpair used: 0x52
[ 3.860645] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 3.860841] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90001d80000, irq=18
[ 3.862001] cfg80211: Regulatory domain changed to country: CN
[ 3.862002] cfg80211: DFS Master region: unset
[ 3.862003] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3.862005] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.862006] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 3.862006] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 3.862007] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[ 3.862008] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 3.862667] ath9k 0000:06:00.0 wlan2: renamed from wlan0
[ 3.877856] systemd-udevd[451]: renamed network interface wlan0 to wlan2
[ 3.879733] cfg80211: Regulatory domain changed to country: FR
[ 3.879735] cfg80211: DFS Master region: unset
[ 3.879736] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3.879738] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.879738] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.879739] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 3.879740] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 3.879741] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 3.926199] kvm: disabled by bios
[ 4.159252] EXT4-fs (sdb1): re-mounted. Opts: discard,errors=remount-ro
[ 4.347919] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.466660] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.492973] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.758362] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 4.758745] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 4.762683] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 4.853746] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 5.100436] init: failsafe main process (870) killed by TERM signal
[ 5.152870] audit: type=1400 audit(1475834289.083:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=966 comm="apparmor_parser"
[ 5.152875] audit: type=1400 audit(1475834289.083:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=966 comm="apparmor_parser"
[ 5.153081] audit: type=1400 audit(1475834289.083:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=966 comm="apparmor_parser"
[ 5.169172] Bluetooth: Core ver 2.21
[ 5.169188] NET: Registered protocol family 31
[ 5.169189] Bluetooth: HCI device and connection manager initialized
[ 5.169192] Bluetooth: HCI socket layer initialized
[ 5.169195] Bluetooth: L2CAP socket layer initialized
[ 5.169199] Bluetooth: SCO socket layer initialized
[ 5.176225] Bluetooth: RFCOMM TTY layer initialized
[ 5.176229] Bluetooth: RFCOMM socket layer initialized
[ 5.176232] Bluetooth: RFCOMM ver 1.11
[ 5.176428] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.176430] Bluetooth: BNEP filters: protocol multicast
[ 5.176432] Bluetooth: BNEP socket layer initialized
[ 5.192174] init: cups main process (971) killed by HUP signal
[ 5.192179] init: cups main process ended, respawning
[ 5.228615] init: samba-ad-dc main process (933) terminated with status 1
[ 5.316251] r8169 0000:03:00.0 eth0: link down
[ 5.316252] r8169 0000:03:00.0 eth0: link down
[ 5.316305] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.422831] kvm: disabled by bios
[ 6.095102] init: plymouth-upstart-bridge main process ended, respawning
[ 6.097699] init: plymouth-upstart-bridge main process (1672) terminated with status 1
[ 6.097705] init: plymouth-upstart-bridge main process ended, respawning
[ 6.888033] r8169 0000:03:00.0 eth0: link up
[ 6.888041] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 35.203689] audit_printk_skb: 162 callbacks suppressed
[ 35.203691] audit: type=1400 audit(1475834318.530:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2882 comm="apparmor_parser"
[ 35.203695] audit: type=1400 audit(1475834318.530:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2882 comm="apparmor_parser"
[ 35.203891] audit: type=1400 audit(1475834318.530:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2882 comm="apparmor_parser"Et question subsidiaire, je vois vers seconde 5 mention de bluetooth. À ma connaissance ma tour n'a pas de module bluetooth ou bien me trompé-je ?
____________________________________________
La modification du fichier /etc.rc.local ( voir https://forum.ubuntu-fr.org/viewtopic.p … #p21604296 ) diminue sensiblement la récurrence du message.
Dernière modification par Coeur Noir (Le 09/10/2016, à 19:25)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#2 Le 07/10/2016, à 18:26
- moko138
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
Si tu n'utilises jamais la touffe bleue, tu pourrais déjà désinstaller les paquets blueman et bluez, installés par défaut,
et, s'il est encore présent, blacklister le module bt.
Démarrage accéléré et fluidité accrue 
Tu as un reset usb toutes les 2 mn et demie (158 secondes).
Chez moi :
dmesg | grep "speed USB device"
[389477.224159] usb 2-1.2: new full-speed USB device number 33 using uhci_hcd
[389477.444180] usb 2-1.2: reset full-speed USB device number 33 using uhci_hcd
[405878.836130] usb 2-1.2: new full-speed USB device number 34 using uhci_hcd
[405879.060170] usb 2-1.2: reset full-speed USB device number 34 using uhci_hcd
[419185.928116] usb 2-1.2: new full-speed USB device number 35 using uhci_hcd
[419186.148092] usb 2-1.2: reset full-speed USB device number 35 using uhci_hcd
[436877.936086] usb 2-1.2: new full-speed USB device number 36 using uhci_hcd
[436878.164140] usb 2-1.2: reset full-speed USB device number 36 using uhci_hcd
[447932.620159] usb 2-1.4.2: new low-speed USB device number 37 using uhci_hcd
[447933.372130] usb 2-1.4.2: new low-speed USB device number 38 using uhci_hcd
[447933.636141] usb 2-1.4.2: new low-speed USB device number 39 using uhci_hcd
[447977.588130] usb 1-2: new high-speed USB device number 5 using ehci-pci
[450345.176148] usb 2-1.2: new full-speed USB device number 40 using uhci_hcd
[450345.396086] usb 2-1.2: reset full-speed USB device number 40 using uhci_hcdsoit 14 occurrences (deux débits pris en compte) donc 13 intervalles, en
450345 - 389477 = 60.868 secondes
60868 / 13 = 4.682 " = 1h 20 mn d'intervalle moyen.
Donc il y a en effet un loup.
Peux-tu montrer les 1000 dernières lignes de dmesg :
dmesg | tail -n 1000%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#3 Le 07/10/2016, à 18:47
- grandtoubab
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
Rien de tout ça sur Debian
root@debian:/# dmesg | grep "speed USB device"
[ 3.337661] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 3.477505] usb 6-1: new full-speed USB device number 2 using ohci-pci
[ 3.657515] usb 5-3: new full-speed USB device number 2 using ohci-pci
[ 3.685517] usb 7-1: new full-speed USB device number 2 using ohci-pciIl doit vous manquer quelque chose dans le noyau
root@debian:/# locate ehci-pci
/lib/modules/4.6.0-1-amd64/kernel/drivers/usb/host/ehci-pci.ko
/lib/modules/4.7.0-1-amd64/kernel/drivers/usb/host/ehci-pci.koDernière modification par grandtoubab (Le 07/10/2016, à 18:48)
Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....
Hors ligne
#4 Le 07/10/2016, à 19:54
- Coeur Noir
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
Euh… j'ai honte j'ai peut-être trouvé l'origine du « problème » en regardant mes ports usb et qui / quoi étaient connectés dessus : j'avais mon récepteur nano pour la souris sans fil sur un usb 3 :-/
Depuis que je l'ai branché sur un port usb « classique » il semble que le message ne revient pas - j'attends quelques heures / jours pour confirmer.
[16623.483384] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[16675.712997] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[16832.377801] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[16884.611408] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[17093.521814] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[17302.420217] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[17406.863398] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[17485.893847] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[17772.950665] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[17904.210666] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[17982.381054] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[18063.447530] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[18087.344285] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[18139.569890] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[18452.903497] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[18453.103502] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[18505.657102] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[18707.563281] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[18715.079538] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[18767.285154] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[18819.522755] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[19341.778771] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[19602.894777] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[19655.412373] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[19816.590964] usb 2-1.1: USB disconnect, device number 3
[19824.905571] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
[19825.000592] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c52f
[19825.000594] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[19825.000596] usb 1-1.4: Product: USB Receiver
[19825.000596] usb 1-1.4: Manufacturer: Logitech
[19825.002971] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C52F.0003/input/input17
[19825.003142] hid-generic 0003:046D:C52F.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input0
[19825.005011] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52F.0004/input/input18
[19825.113754] hid-generic 0003:046D:C52F.0004: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input1
[19846.777407] usb 1-1.4: USB disconnect, device number 5
[19850.670364] usb 1-1.1: new full-speed USB device number 6 using ehci-pci
[19850.765504] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52f
[19850.765506] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[19850.765507] usb 1-1.1: Product: USB Receiver
[19850.765508] usb 1-1.1: Manufacturer: Logitech
[19850.767654] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52F.0005/input/input19
[19850.822599] hid-generic 0003:046D:C52F.0005: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input0
[19850.824699] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52F.0006/input/input20
[19850.878581] hid-generic 0003:046D:C52F.0006: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input1
[27135.769720] perf interrupt took too long (2516 > 2500), lowering kernel.perf_event_max_sample_rate to 50000Cela dit (sudo) locate ehci-pci ne renvoie rien chez moi…
Dernière modification par Coeur Noir (Le 07/10/2016, à 19:58)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#5 Le 07/10/2016, à 23:28
- Coeur Noir
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
Ah bah non… apparemment même souci sous 16.04 - sur la même machine, donc.
[ 0.000000] microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-36-generic (buildd@lcy01-01) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #55-Ubuntu SMP Thu Aug 11 18:01:55 UTC 2016 (Ubuntu 4.4.0-36.55-generic 4.4.16)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-36-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9795fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9796000-0x00000000b979cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b979d000-0x00000000b9be5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9be6000-0x00000000ba02cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba02d000-0x00000000cc66cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cc66d000-0x00000000cc874fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cc875000-0x00000000cc88afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cc88b000-0x00000000ccdcbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ccdcc000-0x00000000cdffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cdfff000-0x00000000cdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUS All Series/Z87-C, BIOS 1007 05/17/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 4 base 00CF000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 041FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 16GB, type WB
[ 0.000000] reg 1, base: 16GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 4, base: 3312MB, range: 16MB, type UC
[ 0.000000] reg 5, base: 16894MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 16110M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3312MB, range: 16MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 5, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 6, base: 16GB, range: 512MB, type WB
[ 0.000000] reg 7, base: 16894MB, range: 2MB, type UC
[ 0.000000] e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd890-0x000fd89f] mapped at [ffff8800000fd890]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x02200000, 0x02200fff] PGTABLE
[ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[ 0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33ae4000-0x35d69fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CC879078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CC885B28 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CC879180 00C9A1 (v02 ALASKA A M I 00000024 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000CCDCA080 000040
[ 0.000000] ACPI: APIC 0x00000000CC885C38 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CC885CD0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CC885D18 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000CC886258 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000CC886D30 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CC886D70 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CC886DA8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000CC887118 00329E (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41fdf6000-0x41fdfafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b9795fff]
[ 0.000000] node 0: [mem 0x00000000b979d000-0x00000000b9be5fff]
[ 0.000000] node 0: [mem 0x00000000ba02d000-0x00000000cc66cfff]
[ 0.000000] node 0: [mem 0x00000000cdfff000-0x00000000cdffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
[ 0.000000] On node 0 totalpages: 4112316
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13001 pages used for memmap
[ 0.000000] DMA32 zone: 832032 pages, LIFO batch:31
[ 0.000000] Normal zone: 51192 pages used for memmap
[ 0.000000] Normal zone: 3276288 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcf200000-0xdf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9796000-0xb979cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9be6000-0xba02cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc66d000-0xcc874fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc875000-0xcc88afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc88b000-0xccdcbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xccdcc000-0xcdffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce000000-0xceffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88041fa00000 s98008 r8192 d28968 u262144
[ 0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4048038
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-36-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16069924K/16449264K available (8394K kernel code, 1282K rwdata, 3944K rodata, 1480K init, 1292K bss, 379340K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:488 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3498.128 MHz processor
[ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6996.25 BogoMIPS (lpj=13992512)
[ 0.000022] pid_max: default: 32768 minimum: 301
[ 0.000026] ACPI: Core revision 20150930
[ 0.006833] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.006847] Security Framework initialized
[ 0.006848] Yama: becoming mindful.
[ 0.006860] AppArmor: AppArmor initialized
[ 0.007493] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.009610] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010544] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.010555] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.010749] Initializing cgroup subsys io
[ 0.010751] Initializing cgroup subsys memory
[ 0.010755] Initializing cgroup subsys devices
[ 0.010757] Initializing cgroup subsys freezer
[ 0.010758] Initializing cgroup subsys net_cls
[ 0.010759] Initializing cgroup subsys perf_event
[ 0.010761] Initializing cgroup subsys net_prio
[ 0.010762] Initializing cgroup subsys hugetlb
[ 0.010764] Initializing cgroup subsys pids
[ 0.010780] CPU: Physical Processor ID: 0
[ 0.010780] CPU: Processor Core ID: 0
[ 0.010783] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.010784] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.011505] mce: CPU supports 9 MCE banks
[ 0.011516] CPU0: Thermal monitoring enabled (TM1)
[ 0.011523] process: using mwait in idle threads
[ 0.011525] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.011526] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.011762] Freeing SMP alternatives memory: 28K (ffffffff820b4000 - ffffffff820bb000)
[ 0.022725] ftrace: allocating 31996 entries in 125 pages
[ 0.031679] smpboot: Max logical packages: 2
[ 0.031680] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.032047] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071732] TSC deadline timer enabled
[ 0.071734] smpboot: CPU0: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.071744] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.071758] ... version: 3
[ 0.071759] ... bit width: 48
[ 0.071759] ... generic registers: 4
[ 0.071760] ... value mask: 0000ffffffffffff
[ 0.071760] ... max period: 0000ffffffffffff
[ 0.071761] ... fixed-purpose events: 3
[ 0.071761] ... event mask: 000000070000000f
[ 0.072315] x86: Booting SMP configuration:
[ 0.072316] .... node #0, CPUs: #1
[ 0.073489] microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13
[ 0.076347] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.076399] #2
[ 0.077476] microcode: CPU2 microcode updated early to revision 0x1e, date = 2015-08-13
[ 0.080335] #3
[ 0.081407] microcode: CPU3 microcode updated early to revision 0x1e, date = 2015-08-13
[ 0.084271] #4 #5 #6 #7
[ 0.096787] x86: Booted up 1 node, 8 CPUs
[ 0.096790] smpboot: Total of 8 processors activated (55970.04 BogoMIPS)
[ 0.103513] devtmpfs: initialized
[ 0.105434] evm: security.selinux
[ 0.105435] evm: security.SMACK64
[ 0.105436] evm: security.SMACK64EXEC
[ 0.105436] evm: security.SMACK64TRANSMUTE
[ 0.105437] evm: security.SMACK64MMAP
[ 0.105437] evm: security.ima
[ 0.105438] evm: security.capability
[ 0.105477] PM: Registering ACPI NVS region [mem 0xb9796000-0xb979cfff] (28672 bytes)
[ 0.105478] PM: Registering ACPI NVS region [mem 0xcc88b000-0xccdcbfff] (5509120 bytes)
[ 0.105577] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.105641] pinctrl core: initialized pinctrl subsystem
[ 0.105718] RTC time: 20:43:59, date: 10/07/16
[ 0.105792] NET: Registered protocol family 16
[ 0.115402] cpuidle: using governor ladder
[ 0.127407] cpuidle: using governor menu
[ 0.127410] PCCT header not found.
[ 0.127458] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.127459] ACPI: bus type PCI registered
[ 0.127460] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.127509] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.127511] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.127517] PCI: Using configuration type 1 for base access
[ 0.127537] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.139636] ACPI: Added _OSI(Module Device)
[ 0.139637] ACPI: Added _OSI(Processor Device)
[ 0.139638] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.139639] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.141752] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.143252] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.143538] ACPI: Dynamic OEM Table Load:
[ 0.143542] ACPI: SSDT 0xFFFF88040D7C3800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.143931] ACPI: Dynamic OEM Table Load:
[ 0.143934] ACPI: SSDT 0xFFFF88040DB21800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.144346] ACPI: Dynamic OEM Table Load:
[ 0.144348] ACPI: SSDT 0xFFFF88040D7AEE00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.145349] ACPI : EC: EC started
[ 0.145358] ACPI: Interpreter enabled
[ 0.145363] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.145366] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.145377] ACPI: (supports S0 S3 S4 S5)
[ 0.145377] ACPI: Using IOAPIC for interrupt routing
[ 0.145393] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.150556] ACPI: Power Resource [FN00] (off)
[ 0.150603] ACPI: Power Resource [FN01] (off)
[ 0.150649] ACPI: Power Resource [FN02] (off)
[ 0.150692] ACPI: Power Resource [FN03] (off)
[ 0.150736] ACPI: Power Resource [FN04] (off)
[ 0.151237] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.151241] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.151334] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.151411] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.151412] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.151659] PCI host bridge to bus 0000:00
[ 0.151661] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.151662] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.151663] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.151664] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.151665] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.151666] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.151667] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.151668] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.151669] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.151670] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.151671] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.151676] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.151732] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.151755] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.151810] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.151835] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.151844] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.151848] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.151851] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.151899] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.151907] pci 0000:00:03.0: reg 0x10: [mem 0xf7e04000-0xf7e07fff 64bit]
[ 0.151975] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.151996] pci 0000:00:16.0: reg 0x10: [mem 0xf7e0e000-0xf7e0e00f 64bit]
[ 0.152040] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.152091] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.152114] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e0c000-0xf7e0c3ff]
[ 0.152174] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.152208] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.152232] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.152252] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e00000-0xf7e03fff 64bit]
[ 0.152299] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.152326] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.152347] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.152398] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.152443] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.152467] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.152517] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.152562] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.152583] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[ 0.152634] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.152678] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.152701] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 0.152752] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.152795] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.152819] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.152843] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e0b000-0xf7e0b3ff]
[ 0.152903] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.152937] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.152960] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
[ 0.153087] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.153104] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.153109] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.153115] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.153120] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.153125] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.153131] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e0a000-0xf7e0a7ff]
[ 0.153152] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.153193] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.153206] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e09000-0xf7e090ff 64bit]
[ 0.153222] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.153293] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.153337] acpiphp: Slot [1] registered
[ 0.153340] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.153394] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.153429] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.153454] pci 0000:03:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit]
[ 0.153470] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.153535] pci 0000:03:00.0: supports D1 D2
[ 0.153536] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.153569] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.159436] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.159438] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.159441] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.159444] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.159488] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[ 0.159577] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.159595] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
[ 0.159601] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.159602] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.159603] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.159604] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.159605] pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.159606] pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.159607] pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.159608] pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.159609] pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.159610] pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.159696] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.159713] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.159714] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.159714] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.159715] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.159716] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.159717] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.159718] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.159719] pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.159720] pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.159721] pci 0000:04:00.0: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.159778] pci 0000:06:00.0: [168c:002e] type 00 class 0x028000
[ 0.159815] pci 0000:06:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 0.159911] pci 0000:06:00.0: supports D1
[ 0.159912] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[ 0.159943] pci 0000:06:00.0: System wakeup disabled by ACPI
[ 0.167439] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.167443] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.167945] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.167975] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.168003] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.168031] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.168058] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.168085] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.168112] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.168139] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.168355] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.168365] ACPI : EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
[ 0.168424] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.168426] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.168427] vgaarb: loaded
[ 0.168428] vgaarb: bridge control possible 0000:00:02.0
[ 0.168580] SCSI subsystem initialized
[ 0.168601] libata version 3.00 loaded.
[ 0.168613] ACPI: bus type USB registered
[ 0.168623] usbcore: registered new interface driver usbfs
[ 0.168628] usbcore: registered new interface driver hub
[ 0.168641] usbcore: registered new device driver usb
[ 0.168724] PCI: Using ACPI for IRQ routing
[ 0.169844] PCI: pci_cache_line_size set to 64 bytes
[ 0.169878] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.169879] e820: reserve RAM buffer [mem 0xb9796000-0xbbffffff]
[ 0.169880] e820: reserve RAM buffer [mem 0xb9be6000-0xbbffffff]
[ 0.169881] e820: reserve RAM buffer [mem 0xcc66d000-0xcfffffff]
[ 0.169881] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[ 0.169882] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[ 0.169946] NetLabel: Initializing
[ 0.169947] NetLabel: domain hash size = 128
[ 0.169947] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.169954] NetLabel: unlabeled traffic allowed by default
[ 0.169990] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.169993] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.172002] amd_nb: Cannot enumerate AMD northbridges
[ 0.172011] clocksource: Switched to clocksource hpet
[ 0.175799] AppArmor: AppArmor Filesystem Enabled
[ 0.175830] pnp: PnP ACPI init
[ 0.175875] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.175877] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.175972] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.175973] system 00:01: [io 0xffff] has been reserved
[ 0.175974] system 00:01: [io 0xffff] has been reserved
[ 0.175975] system 00:01: [io 0xffff] has been reserved
[ 0.175976] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.175977] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.175978] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.175979] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.175980] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.175981] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.175983] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.175997] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.176034] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.176035] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.176082] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.176083] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.176110] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.176111] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.176241] pnp 00:06: [dma 0 disabled]
[ 0.176268] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.176292] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.176537] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.176538] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.176539] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.176540] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.176541] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.176542] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.176543] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.176544] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.176545] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.176546] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.176547] system 00:08: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.176548] system 00:08: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.176550] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.176698] pnp: PnP ACPI: found 9 devices
[ 0.182176] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.182212] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.182217] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.182225] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.182227] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.182230] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.182232] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.182236] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.182251] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[ 0.182259] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.182262] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.182268] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.182269] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.182270] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.182271] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.182272] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.182273] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.182274] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.182275] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.182276] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.182277] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.182278] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.182279] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.182279] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.182280] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.182281] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.182282] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.182283] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.182284] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.182285] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.182286] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.182287] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.182287] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.182288] pci_bus 0000:04: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.182289] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.182290] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.182291] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.182292] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.182293] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.182294] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.182295] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.182295] pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.182296] pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.182297] pci_bus 0000:05: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.182298] pci_bus 0000:06: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.182317] NET: Registered protocol family 2
[ 0.182422] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.182553] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.182662] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.182680] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.182714] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.182771] NET: Registered protocol family 1
[ 0.182780] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.182968] PCI: CLS 64 bytes, default 64
[ 0.182998] Trying to unpack rootfs image as initramfs...
[ 0.533331] Freeing initrd memory: 35352K (ffff880033ae4000 - ffff880035d6a000)
[ 0.533355] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.533356] software IO TLB [mem 0xc866d000-0xcc66d000] (64MB) mapped at [ffff8800c866d000-ffff8800cc66cfff]
[ 0.533405] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.533406] hw unit of domain pp0-core 2^-14 Joules
[ 0.533407] hw unit of domain package 2^-14 Joules
[ 0.533408] hw unit of domain dram 2^-14 Joules
[ 0.533408] hw unit of domain pp1-gpu 2^-14 Joules
[ 0.533533] Scanning for low memory corruption every 60 seconds
[ 0.533765] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.533791] audit: initializing netlink subsys (disabled)
[ 0.533800] audit: type=2000 audit(1475873039.524:1): initialized
[ 0.534102] Initialise system trusted keyring
[ 0.534191] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.534192] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.535105] zbud: loaded
[ 0.535232] VFS: Disk quotas dquot_6.6.0
[ 0.535252] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.535411] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.535555] fuse init (API version 7.23)
[ 0.535638] Key type big_key registered
[ 0.535655] Allocating IMA MOK and blacklist keyrings.
[ 0.535894] Key type asymmetric registered
[ 0.535896] Asymmetric key parser 'x509' registered
[ 0.535917] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.535944] io scheduler noop registered
[ 0.535946] io scheduler deadline registered (default)
[ 0.535964] io scheduler cfq registered
[ 0.536333] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.536337] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.536360] intel_idle: MWAIT substates: 0x42120
[ 0.536360] intel_idle: v0.4.1 model 0x3C
[ 0.536361] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.536600] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.536603] ACPI: Power Button [PWRB]
[ 0.536625] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.536626] ACPI: Power Button [PWRF]
[ 0.537097] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.537098] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.537233] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.537234] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.537265] GHES: HEST is not enabled!
[ 0.537317] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.557681] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.558649] Linux agpgart interface v0.103
[ 0.560634] brd: module loaded
[ 0.561503] loop: module loaded
[ 0.561642] libphy: Fixed MDIO Bus: probed
[ 0.561643] tun: Universal TUN/TAP device driver, 1.6
[ 0.561644] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.561666] PPP generic driver version 2.4.2
[ 0.561697] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.561699] ehci-pci: EHCI PCI platform driver
[ 0.561763] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.561767] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.561776] ehci-pci 0000:00:1a.0: debug port 2
[ 0.565660] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.565667] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7e0c000
[ 0.576016] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.576049] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.576050] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.576051] usb usb1: Product: EHCI Host Controller
[ 0.576052] usb usb1: Manufacturer: Linux 4.4.0-36-generic ehci_hcd
[ 0.576053] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.576146] hub 1-0:1.0: USB hub found
[ 0.576151] hub 1-0:1.0: 2 ports detected
[ 0.576297] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.576300] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.576308] ehci-pci 0000:00:1d.0: debug port 2
[ 0.580214] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.580221] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e0b000
[ 0.592038] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.592060] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.592061] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.592062] usb usb2: Product: EHCI Host Controller
[ 0.592063] usb usb2: Manufacturer: Linux 4.4.0-36-generic ehci_hcd
[ 0.592064] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.592135] hub 2-0:1.0: USB hub found
[ 0.592138] hub 2-0:1.0: 2 ports detected
[ 0.592212] ehci-platform: EHCI generic platform driver
[ 0.592220] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.592222] ohci-pci: OHCI PCI platform driver
[ 0.592229] ohci-platform: OHCI generic platform driver
[ 0.592233] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.592269] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.592269] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.592893] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.592955] mousedev: PS/2 mouse device common for all mice
[ 0.593035] rtc_cmos 00:02: RTC can wake from S4
[ 0.593135] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.593155] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.593160] i2c /dev entries driver
[ 0.593191] device-mapper: uevent: version 1.0.3
[ 0.593230] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.593242] Intel P-state driver initializing.
[ 0.593399] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.594248] NET: Registered protocol family 10
[ 0.594699] NET: Registered protocol family 17
[ 0.594730] Key type dns_resolver registered
[ 0.595498] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1e
[ 0.595529] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1e
[ 0.595542] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1e
[ 0.595587] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1e
[ 0.595634] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x1e
[ 0.595674] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x1e
[ 0.595692] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x1e
[ 0.595725] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x1e
[ 0.595873] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.596577] registered taskstats version 1
[ 0.596616] Loading compiled-in X.509 certificates
[ 0.598921] Loaded X.509 cert 'Build time autogenerated kernel key: 181cd957879f68b474ab1d0c92722cd44e756f77'
[ 0.598985] zswap: loaded using pool lzo/zbud
[ 0.601293] Key type trusted registered
[ 0.603562] Key type encrypted registered
[ 0.603567] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.603570] ima: No TPM chip found, activating TPM-bypass!
[ 0.603582] evm: HMAC attrs: 0x1
[ 0.603879] Magic number: 4:357:750
[ 0.603889] tty ttyS1: hash matches
[ 0.603978] rtc_cmos 00:02: setting system clock to 2016-10-07 20:43:59 UTC (1475873039)
[ 0.604035] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.604036] EDD information not available.
[ 0.604085] PM: Hibernation image not present or could not be loaded.
[ 0.604809] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[ 0.604810] Write protecting the kernel read-only data: 14336k
[ 0.605163] Freeing unused kernel memory: 1832K (ffff880001836000 - ffff880001a00000)
[ 0.605425] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[ 0.612534] random: systemd-udevd urandom read with 6 bits of entropy available
[ 0.615509] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.631978] wmi: Mapper loaded
[ 0.631987] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.649479] ahci 0000:00:1f.2: version 3.0
[ 0.649649] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x35 impl SATA mode
[ 0.649652] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.650495] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.650501] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.651697] [drm] Initialized drm 1.1.0 20060810
[ 0.656903] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90001b90000, 74:d0:2b:9e:fb:40, XID 0c000800 IRQ 26
[ 0.656906] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.672722] scsi host0: ahci
[ 0.672790] scsi host1: ahci
[ 0.672845] scsi host2: ahci
[ 0.672907] scsi host3: ahci
[ 0.672972] scsi host4: ahci
[ 0.673035] scsi host5: ahci
[ 0.673075] ata1: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a100 irq 25
[ 0.673076] ata2: DUMMY
[ 0.673078] ata3: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a200 irq 25
[ 0.673079] ata4: DUMMY
[ 0.673081] ata5: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a300 irq 25
[ 0.673082] ata6: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a380 irq 25
[ 0.673562] [drm] Memory usable by graphics device = 2048M
[ 0.673564] [drm] Replacing VGA console driver
[ 0.674143] Console: switching to colour dummy device 80x25
[ 0.680195] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.680198] [drm] Driver supports precise vblank timestamp query.
[ 0.680698] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.690812] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 0.747754] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.748096] acpi device:62: registered as cooling_device13
[ 0.748138] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.748268] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 0.888026] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.904015] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.940547] fbcon: inteldrmfb (fb0) is primary device
[ 0.992022] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.992035] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.992048] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.992796] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.992799] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88040f4e0528), AE_NOT_FOUND (20150930/psparse-542)
[ 0.993078] ata3.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3MA, max UDMA/133
[ 0.993079] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.993676] ata1.00: ATAPI: ATAPI iHAS124 Y, BL0V, max UDMA/100
[ 0.993908] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.993910] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88040f4e0528), AE_NOT_FOUND (20150930/psparse-542)
[ 0.993937] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.993940] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff88040f4e0618), AE_NOT_FOUND (20150930/psparse-542)
[ 0.994080] ata5.00: READ LOG DMA EXT failed, trying unqueued
[ 0.994115] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.994115] ata5.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB0Q, max UDMA/133
[ 0.994116] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.994205] ata3.00: configured for UDMA/133
[ 0.994300] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.994302] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff88040f4e0618), AE_NOT_FOUND (20150930/psparse-542)
[ 0.994370] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.994371] ata5.00: configured for UDMA/133
[ 0.995532] ata1.00: configured for UDMA/100
[ 0.996004] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.996416] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.996417] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff88040f4e0690), AE_NOT_FOUND (20150930/psparse-542)
[ 0.996619] ata6.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[ 0.996620] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.997103] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.997105] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff88040f4e0690), AE_NOT_FOUND (20150930/psparse-542)
[ 0.997266] ata6.00: configured for UDMA/133
[ 0.997333] scsi 0:0:0:0: CD-ROM ATAPI iHAS124 Y BL0V PQ: 0 ANSI: 5
[ 1.013618] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.013619] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.013727] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.013800] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.013971] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72101 A3MA PQ: 0 ANSI: 5
[ 1.014137] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.014142] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.014244] sd 2:0:0:0: [sda] Write Protect is off
[ 1.014246] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.014282] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.014320] scsi 4:0:0:0: Direct-Access ATA Samsung SSD 840 BB0Q PQ: 0 ANSI: 5
[ 1.014455] sd 4:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.014476] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1.014540] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.014542] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.014561] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.014720] scsi 5:0:0:0: Direct-Access ATA WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[ 1.014814] sdb: sdb1 sdb2 sdb3
[ 1.014817] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.014818] sd 5:0:0:0: [sdc] 4096-byte physical blocks
[ 1.014829] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 1.014865] sd 5:0:0:0: [sdc] Write Protect is off
[ 1.014866] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.014887] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.015047] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 1.024361] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.024362] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.024600] hub 1-1:1.0: USB hub found
[ 1.024685] hub 1-1:1.0: 6 ports detected
[ 1.036270] sda: sda1 sda2
[ 1.036362] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.036363] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.036590] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.036591] hub 2-1:1.0: USB hub found
[ 1.036697] hub 2-1:1.0: 8 ports detected
[ 1.062267] sdc: sdc1 sdc2 < sdc5 >
[ 1.062737] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 1.295995] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.356056] Console: switching to colour frame buffer device 240x67
[ 1.358654] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.391042] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52f
[ 1.391044] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.391045] usb 1-1.1: Product: USB Receiver
[ 1.391046] usb 1-1.1: Manufacturer: Logitech
[ 1.394484] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.398128] usbcore: registered new interface driver usbhid
[ 1.398130] usbhid: USB HID core driver
[ 1.399548] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52F.0001/input/input4
[ 1.399634] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input0
[ 1.400227] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52F.0002/input/input5
[ 1.456186] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input1
[ 1.459966] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 1.532004] tsc: Refined TSC clocksource calibration: 3497.972 MHz
[ 1.532006] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x326bd592a83, max_idle_ns: 440795311901 ns
[ 2.116552] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.164726] random: nonblocking pool is initialized
[ 2.175606] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 2.175707] systemd[1]: Detected architecture x86-64.
[ 2.175819] systemd[1]: Set hostname to <Asgard>.
[ 2.190882] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0158
[ 2.190884] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.190885] usb 1-1.2: Product: USB2.0-CRW
[ 2.190886] usb 1-1.2: Manufacturer: Generic
[ 2.190887] usb 1-1.2: SerialNumber: 20060413092100000
[ 2.243002] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.243036] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.243046] systemd[1]: Reached target User and Group Name Lookups.
[ 2.243073] systemd[1]: Listening on Journal Socket.
[ 2.243127] systemd[1]: Created slice User and Session Slice.
[ 2.243137] systemd[1]: Reached target Remote File Systems (Pre).
[ 2.243144] systemd[1]: Reached target Remote File Systems.
[ 2.243163] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.243177] systemd[1]: Listening on Syslog Socket.
[ 2.243189] systemd[1]: Reached target Encrypted Volumes.
[ 2.243207] systemd[1]: Listening on udev Control Socket.
[ 2.243220] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.243256] systemd[1]: Created slice System Slice.
[ 2.256065] systemd[1]: Starting Load Kernel Modules...
[ 2.256285] systemd[1]: Starting Uncomplicated firewall...
[ 2.256505] systemd[1]: Started Braille Device Support.
[ 2.256695] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.256721] systemd[1]: Reached target Slices.
[ 2.257041] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 2.257099] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.257139] systemd[1]: Listening on udev Kernel Socket.
[ 2.259640] systemd[1]: Mounting Debug File System...
[ 2.259947] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.260025] systemd[1]: Listening on Journal Audit Socket.
[ 2.260371] systemd[1]: Starting Set console keymap...
[ 2.260699] systemd[1]: Mounting Huge Pages File System...
[ 2.260958] systemd[1]: Started Read required files in advance.
[ 2.261396] systemd[1]: Starting Journal Service...
[ 2.262316] systemd[1]: Started Uncomplicated firewall.
[ 2.262434] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 2.266662] lp: driver loaded but no devices found
[ 2.266843] systemd[1]: Mounted Debug File System.
[ 2.266899] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.266929] systemd[1]: Mounted Huge Pages File System.
[ 2.268605] ppdev: user-space parallel port driver
[ 2.271171] systemd[1]: Started Load Kernel Modules.
[ 2.277755] systemd[1]: Mounting FUSE Control File System...
[ 2.277997] systemd[1]: Starting Apply Kernel Variables...
[ 2.278361] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 2.279169] systemd[1]: Mounted FUSE Control File System.
[ 2.285755] systemd[1]: Started Apply Kernel Variables.
[ 2.287230] systemd[1]: Started Journal Service.
[ 2.396513] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[ 2.404278] systemd-journald[1138]: Received request to flush runtime journal from PID 1
[ 2.461248] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.481793] usbcore: registered new interface driver usb-storage
[ 2.482959] usbcore: registered new interface driver uas
[ 2.484353] ums-realtek 1-1.2:1.0: USB Mass Storage device detected
[ 2.487016] scsi host6: usb-storage 1-1.2:1.0
[ 2.487085] usbcore: registered new interface driver ums-realtek
[ 2.498981] AVX2 version of gcm_enc/dec engaged.
[ 2.498983] AES CTR mode by8 optimization enabled
[ 2.513459] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.534400] kvm: disabled by bios
[ 2.534502] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 2.534505] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.534507] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.534509] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 2.534510] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
[ 2.534512] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 2.534514] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 2.534515] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 2.534517] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 2.618110] ath: EEPROM regdomain: 0x809c
[ 2.618112] ath: EEPROM indicates we should expect a country code
[ 2.618113] ath: doing EEPROM country->regdmn map search
[ 2.618113] ath: country maps to regdmn code: 0x52
[ 2.618114] ath: Country alpha2 being used: CN
[ 2.618115] ath: Regpair used: 0x52
[ 2.619907] clocksource: Switched to clocksource tsc
[ 2.650166] cfg80211: World regulatory domain updated:
[ 2.650169] cfg80211: DFS Master region: unset
[ 2.650170] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2.650171] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.650172] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.650173] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.650174] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 2.650175] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 2.650176] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 2.650177] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.650177] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 2.676808] kvm: disabled by bios
[ 2.677004] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
[ 2.677086] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
[ 2.677405] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 2.677504] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 2.677588] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 2.677670] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 2.677769] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 2.677847] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 2.677930] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 2.678014] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 2.680485] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 2.680662] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90001d40000, irq=18
[ 2.682559] cfg80211: Regulatory domain changed to country: CN
[ 2.682561] cfg80211: DFS Master region: FCC
[ 2.682562] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2.682563] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.682564] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[ 2.682565] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 2.682566] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 2.682567] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 2.682567] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[ 2.682568] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 2.748318] intel_rapl: Found RAPL domain package
[ 2.748321] intel_rapl: Found RAPL domain core
[ 2.748323] intel_rapl: Found RAPL domain uncore
[ 2.748325] intel_rapl: Found RAPL domain dram
[ 2.749873] ath9k 0000:06:00.0 wlp6s0: renamed from wlan0
[ 2.750632] asus_wmi: ASUS WMI generic driver loaded
[ 2.753211] asus_wmi: Initialization: 0x0
[ 2.753224] asus_wmi: BIOS WMI version: 0.9
[ 2.753244] asus_wmi: SFUN value: 0x0
[ 2.753419] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input16
[ 2.753469] asus_wmi: Number of fans: 1
[ 3.228534] Adding 760828k swap on /dev/sdc5. Priority:-1 extents:1 across:760828k FS
[ 3.393421] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.436048] audit: type=1400 audit(1475873042.328:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1601 comm="apparmor_parser"
[ 3.436266] audit: type=1400 audit(1475873042.328:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1604 comm="apparmor_parser"
[ 3.437237] audit: type=1400 audit(1475873042.328:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1606 comm="apparmor_parser"
[ 3.437337] audit: type=1400 audit(1475873042.328:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1597 comm="apparmor_parser"
[ 3.437352] audit: type=1400 audit(1475873042.328:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1597 comm="apparmor_parser"
[ 3.437356] audit: type=1400 audit(1475873042.328:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1597 comm="apparmor_parser"
[ 3.437359] audit: type=1400 audit(1475873042.328:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1597 comm="apparmor_parser"
[ 3.437495] audit: type=1400 audit(1475873042.328:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1603 comm="apparmor_parser"
[ 3.437511] audit: type=1400 audit(1475873042.328:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1603 comm="apparmor_parser"
[ 3.496347] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 3.496588] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 3.499089] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 3.601566] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ 3.603221] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 3.650453] r8169 0000:03:00.0 enp3s0: link down
[ 3.650454] r8169 0000:03:00.0 enp3s0: link down
[ 3.650507] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 5.250092] r8169 0000:03:00.0 enp3s0: link up
[ 5.250114] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 13.715447] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 160.150709] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 212.367773] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 630.134870] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 755.307534] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 822.377564] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 840.057023] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 892.279410] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1048.946505] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1198.686119] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1258.344315] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1327.194169] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1519.964173] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1572.186505] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1689.166781] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1886.032504] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1954.886301] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 2057.794936] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 2110.528800] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 2169.406500] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 2253.635208] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 2449.459825] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 2567.487553] usb 1-1.2: reset high-speed USB device number 4 using ehci-pciDébuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#6 Le 08/10/2016, à 04:06
- moko138
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
(sudo) locate ehci-pci ne renvoie rien chez moi…
Dans ma 14.04 non plus.
- -
BOOT_IMAGE=/boot/vmlinuz-4.4.0-36-genericEt après mise à jour de ton système, le problème perdurera-t-il ?
- -
Tu parles de prise usb3, donc on devrait trouver du xhci dans tes dmesg. Or il n'y en a pas un seul. Ça ne me paraît pas normal.
- -
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#7 Le 08/10/2016, à 07:42
- MicP
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
Bonjour
… DMI: ASUS All Series/Z87-C, BIOS 1007 05/17/2013 … ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359) … ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88040f4e0528), AE_NOT_FOUND (20150930/psparse-542) …
version installée : 1007 17/05/2013
dernière version : 2103 19/09/2014
https://www.asus.com/fr/Motherboards/Z8 … _Download/
Dernière modification par MicP (Le 08/10/2016, à 07:43)
Hors ligne
#8 Le 08/10/2016, à 14:23
- Coeur Noir
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
Je confirme que le « problème » persiste également sous 14.04 - toujours sur le device number 4…
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-38-generic (buildd@lgw01-22) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #57~14.04.1-Ubuntu SMP Tue Sep 6 17:20:43 UTC 2016 (Ubuntu 4.4.0-38.57~14.04.1-generic 4.4.19)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-38-generic root=UUID=a7428baa-93fd-48e8-922d-637da9044d2f ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9795fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9796000-0x00000000b979cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b979d000-0x00000000b9be5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9be6000-0x00000000ba02cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba02d000-0x00000000cc66cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cc66d000-0x00000000cc874fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cc875000-0x00000000cc88afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cc88b000-0x00000000ccdcbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ccdcc000-0x00000000cdffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cdfff000-0x00000000cdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUS All Series/Z87-C, BIOS 1007 05/17/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 4 base 00CF000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 041FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 16GB, type WB
[ 0.000000] reg 1, base: 16GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 4, base: 3312MB, range: 16MB, type UC
[ 0.000000] reg 5, base: 16894MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 16110M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3312MB, range: 16MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 5, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 6, base: 16GB, range: 512MB, type WB
[ 0.000000] reg 7, base: 16894MB, range: 2MB, type UC
[ 0.000000] e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd890-0x000fd89f] mapped at [ffff8800000fd890]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[ 0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[ 0.000000] BRK [0x02206000, 0x02206fff] PGTABLE
[ 0.000000] BRK [0x02207000, 0x02207fff] PGTABLE
[ 0.000000] BRK [0x02208000, 0x02208fff] PGTABLE
[ 0.000000] BRK [0x02209000, 0x02209fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3416a000-0x360acfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CC879078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CC885B28 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CC879180 00C9A1 (v02 ALASKA A M I 00000024 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000CCDCA080 000040
[ 0.000000] ACPI: APIC 0x00000000CC885C38 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CC885CD0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CC885D18 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000CC886258 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000CC886D30 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CC886D70 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CC886DA8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000CC887118 00329E (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41fdf6000-0x41fdfafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b9795fff]
[ 0.000000] node 0: [mem 0x00000000b979d000-0x00000000b9be5fff]
[ 0.000000] node 0: [mem 0x00000000ba02d000-0x00000000cc66cfff]
[ 0.000000] node 0: [mem 0x00000000cdfff000-0x00000000cdffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
[ 0.000000] On node 0 totalpages: 4112316
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13001 pages used for memmap
[ 0.000000] DMA32 zone: 832032 pages, LIFO batch:31
[ 0.000000] Normal zone: 51192 pages used for memmap
[ 0.000000] Normal zone: 3276288 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcf200000-0xdf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9796000-0xb979cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9be6000-0xba02cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc66d000-0xcc874fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc875000-0xcc88afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc88b000-0xccdcbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xccdcc000-0xcdffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce000000-0xceffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88041fa00000 s98008 r8192 d28968 u262144
[ 0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4048038
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-38-generic root=UUID=a7428baa-93fd-48e8-922d-637da9044d2f ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16073248K/16449264K available (8187K kernel code, 1292K rwdata, 3960K rodata, 1484K init, 1292K bss, 376016K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:488 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3498.255 MHz processor
[ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 6996.51 BogoMIPS (lpj=13993020)
[ 0.000022] pid_max: default: 32768 minimum: 301
[ 0.000026] ACPI: Core revision 20150930
[ 0.006549] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.006562] Security Framework initialized
[ 0.006563] Yama: becoming mindful.
[ 0.006574] AppArmor: AppArmor initialized
[ 0.007213] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.009368] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010324] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.010336] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.010530] Initializing cgroup subsys io
[ 0.010532] Initializing cgroup subsys memory
[ 0.010537] Initializing cgroup subsys devices
[ 0.010538] Initializing cgroup subsys freezer
[ 0.010539] Initializing cgroup subsys net_cls
[ 0.010541] Initializing cgroup subsys perf_event
[ 0.010543] Initializing cgroup subsys net_prio
[ 0.010545] Initializing cgroup subsys hugetlb
[ 0.010546] Initializing cgroup subsys pids
[ 0.010562] CPU: Physical Processor ID: 0
[ 0.010563] CPU: Processor Core ID: 0
[ 0.010566] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.010566] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.011288] mce: CPU supports 9 MCE banks
[ 0.011299] CPU0: Thermal monitoring enabled (TM1)
[ 0.011306] process: using mwait in idle threads
[ 0.011308] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.011309] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.011547] Freeing SMP alternatives memory: 28K (ffffffff820b8000 - ffffffff820bf000)
[ 0.022412] ftrace: allocating 32041 entries in 126 pages
[ 0.031725] smpboot: Max logical packages: 2
[ 0.031727] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.032086] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071771] TSC deadline timer enabled
[ 0.071772] smpboot: CPU0: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.071784] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.071797] ... version: 3
[ 0.071798] ... bit width: 48
[ 0.071798] ... generic registers: 4
[ 0.071799] ... value mask: 0000ffffffffffff
[ 0.071800] ... max period: 0000ffffffffffff
[ 0.071800] ... fixed-purpose events: 3
[ 0.071801] ... event mask: 000000070000000f
[ 0.072373] x86: Booting SMP configuration:
[ 0.072374] .... node #0, CPUs: #1
[ 0.075531] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.075579] #2 #3 #4 #5 #6 #7
[ 0.094448] x86: Booted up 1 node, 8 CPUs
[ 0.094451] smpboot: Total of 8 processors activated (55972.08 BogoMIPS)
[ 0.101174] devtmpfs: initialized
[ 0.103165] evm: security.selinux
[ 0.103166] evm: security.SMACK64
[ 0.103166] evm: security.SMACK64EXEC
[ 0.103167] evm: security.SMACK64TRANSMUTE
[ 0.103167] evm: security.SMACK64MMAP
[ 0.103168] evm: security.ima
[ 0.103168] evm: security.capability
[ 0.103207] PM: Registering ACPI NVS region [mem 0xb9796000-0xb979cfff] (28672 bytes)
[ 0.103208] PM: Registering ACPI NVS region [mem 0xcc88b000-0xccdcbfff] (5509120 bytes)
[ 0.103306] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.103365] pinctrl core: initialized pinctrl subsystem
[ 0.103441] RTC time: 11:59:51, date: 10/08/16
[ 0.103520] NET: Registered protocol family 16
[ 0.113062] cpuidle: using governor ladder
[ 0.133072] cpuidle: using governor menu
[ 0.133074] PCCT header not found.
[ 0.133126] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.133127] ACPI: bus type PCI registered
[ 0.133128] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.133177] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.133179] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.133185] PCI: Using configuration type 1 for base access
[ 0.133208] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.145309] ACPI: Added _OSI(Module Device)
[ 0.145310] ACPI: Added _OSI(Processor Device)
[ 0.145311] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.145311] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.147465] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.148966] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.149240] ACPI: Dynamic OEM Table Load:
[ 0.149244] ACPI: SSDT 0xFFFF88040D019400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.149636] ACPI: Dynamic OEM Table Load:
[ 0.149639] ACPI: SSDT 0xFFFF88040D472000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.150053] ACPI: Dynamic OEM Table Load:
[ 0.150055] ACPI: SSDT 0xFFFF88040D009800 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.151049] ACPI : EC: EC started
[ 0.151057] ACPI: Interpreter enabled
[ 0.151061] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.151064] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.151074] ACPI: (supports S0 S3 S4 S5)
[ 0.151075] ACPI: Using IOAPIC for interrupt routing
[ 0.151090] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.156131] ACPI: Power Resource [FN00] (off)
[ 0.156178] ACPI: Power Resource [FN01] (off)
[ 0.156223] ACPI: Power Resource [FN02] (off)
[ 0.156266] ACPI: Power Resource [FN03] (off)
[ 0.156309] ACPI: Power Resource [FN04] (off)
[ 0.156806] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.156810] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.156903] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.156975] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.156976] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.157206] PCI host bridge to bus 0000:00
[ 0.157208] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.157209] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.157210] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.157211] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.157212] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.157213] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.157214] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.157214] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.157215] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.157216] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.157217] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.157222] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.157279] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.157303] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.157355] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.157382] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.157391] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.157395] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.157398] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.157447] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.157455] pci 0000:00:03.0: reg 0x10: [mem 0xf7e04000-0xf7e07fff 64bit]
[ 0.157524] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.157546] pci 0000:00:16.0: reg 0x10: [mem 0xf7e0e000-0xf7e0e00f 64bit]
[ 0.157590] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.157642] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.157665] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e0c000-0xf7e0c3ff]
[ 0.157725] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.157758] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.157783] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.157803] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e00000-0xf7e03fff 64bit]
[ 0.157851] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.157878] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.157901] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.157951] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.157997] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.158020] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.158072] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.158116] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.158138] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[ 0.158189] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.158233] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.158259] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 0.158310] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.158354] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.158379] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.158402] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e0b000-0xf7e0b3ff]
[ 0.158462] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.158496] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.158520] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
[ 0.158648] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.158664] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.158670] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.158675] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.158681] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.158686] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.158692] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e0a000-0xf7e0a7ff]
[ 0.158713] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.158756] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.158768] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e09000-0xf7e090ff 64bit]
[ 0.158784] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.158857] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.158899] acpiphp: Slot [1] registered
[ 0.158902] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.158957] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.158993] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.159018] pci 0000:03:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit]
[ 0.159034] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.159100] pci 0000:03:00.0: supports D1 D2
[ 0.159101] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.159135] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.165097] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.165099] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.165102] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.165105] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.165148] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[ 0.165237] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.165256] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
[ 0.165262] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.165263] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.165264] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.165265] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.165266] pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.165267] pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.165268] pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.165269] pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.165270] pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.165271] pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.165358] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.165374] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.165375] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.165376] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.165377] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.165378] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.165379] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.165380] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.165381] pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.165382] pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.165383] pci 0000:04:00.0: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.165442] pci 0000:06:00.0: [168c:002e] type 00 class 0x028000
[ 0.165479] pci 0000:06:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 0.165576] pci 0000:06:00.0: supports D1
[ 0.165577] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[ 0.165608] pci 0000:06:00.0: System wakeup disabled by ACPI
[ 0.173098] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.173102] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.173592] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.173621] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.173648] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.173675] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.173702] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.173728] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.173755] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.173781] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.173995] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.174014] ACPI : EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
[ 0.174078] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.174080] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.174081] vgaarb: loaded
[ 0.174082] vgaarb: bridge control possible 0000:00:02.0
[ 0.174218] SCSI subsystem initialized
[ 0.174239] libata version 3.00 loaded.
[ 0.174252] ACPI: bus type USB registered
[ 0.174261] usbcore: registered new interface driver usbfs
[ 0.174267] usbcore: registered new interface driver hub
[ 0.174279] usbcore: registered new device driver usb
[ 0.174358] PCI: Using ACPI for IRQ routing
[ 0.175486] PCI: pci_cache_line_size set to 64 bytes
[ 0.175520] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.175521] e820: reserve RAM buffer [mem 0xb9796000-0xbbffffff]
[ 0.175522] e820: reserve RAM buffer [mem 0xb9be6000-0xbbffffff]
[ 0.175523] e820: reserve RAM buffer [mem 0xcc66d000-0xcfffffff]
[ 0.175523] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[ 0.175524] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[ 0.175596] NetLabel: Initializing
[ 0.175597] NetLabel: domain hash size = 128
[ 0.175597] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.175605] NetLabel: unlabeled traffic allowed by default
[ 0.175643] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.175646] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.177655] amd_nb: Cannot enumerate AMD northbridges
[ 0.177666] clocksource: Switched to clocksource hpet
[ 0.181290] AppArmor: AppArmor Filesystem Enabled
[ 0.181321] pnp: PnP ACPI init
[ 0.181366] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.181368] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.181460] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.181462] system 00:01: [io 0xffff] has been reserved
[ 0.181463] system 00:01: [io 0xffff] has been reserved
[ 0.181464] system 00:01: [io 0xffff] has been reserved
[ 0.181465] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.181466] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.181467] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.181467] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.181469] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.181469] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.181471] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.181485] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.181511] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.181513] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.181561] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.181562] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.181590] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.181591] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.181731] pnp 00:06: [dma 0 disabled]
[ 0.181758] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.181781] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.182025] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.182026] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.182027] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.182028] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.182030] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.182031] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.182032] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.182033] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.182034] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.182035] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.182036] system 00:08: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.182037] system 00:08: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.182039] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.182186] pnp: PnP ACPI: found 9 devices
[ 0.187782] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.187817] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.187822] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.187830] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.187832] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.187835] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.187837] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.187841] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.187856] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[ 0.187864] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.187867] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.187873] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.187874] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.187875] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.187876] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.187877] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.187878] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.187879] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.187879] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.187880] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.187881] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.187882] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.187883] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.187884] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.187885] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.187886] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.187887] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.187888] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.187889] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.187890] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.187891] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.187891] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.187892] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.187893] pci_bus 0000:04: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.187894] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.187895] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.187896] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.187897] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.187898] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.187899] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.187899] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.187900] pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.187901] pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.187902] pci_bus 0000:05: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.187903] pci_bus 0000:06: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.187923] NET: Registered protocol family 2
[ 0.188030] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.188168] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.188279] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.188299] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.188334] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.188394] NET: Registered protocol family 1
[ 0.188403] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.188587] PCI: CLS 64 bytes, default 64
[ 0.188616] Trying to unpack rootfs image as initramfs...
[ 0.500360] Freeing initrd memory: 32012K (ffff88003416a000 - ffff8800360ad000)
[ 0.500368] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.500370] software IO TLB [mem 0xc866d000-0xcc66d000] (64MB) mapped at [ffff8800c866d000-ffff8800cc66cfff]
[ 0.500423] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.500424] hw unit of domain pp0-core 2^-14 Joules
[ 0.500425] hw unit of domain package 2^-14 Joules
[ 0.500425] hw unit of domain dram 2^-14 Joules
[ 0.500426] hw unit of domain pp1-gpu 2^-14 Joules
[ 0.500550] Scanning for low memory corruption every 60 seconds
[ 0.500779] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.500808] audit: initializing netlink subsys (disabled)
[ 0.500817] audit: type=2000 audit(1475927991.492:1): initialized
[ 0.501102] Initialise system trusted keyring
[ 0.501187] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.501188] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.502030] zbud: loaded
[ 0.502157] VFS: Disk quotas dquot_6.6.0
[ 0.502176] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.502326] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.502461] fuse init (API version 7.23)
[ 0.502537] Key type big_key registered
[ 0.502548] Allocating IMA MOK and blacklist keyrings.
[ 0.502798] Key type asymmetric registered
[ 0.502800] Asymmetric key parser 'x509' registered
[ 0.502820] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.502848] io scheduler noop registered
[ 0.502850] io scheduler deadline registered (default)
[ 0.502867] io scheduler cfq registered
[ 0.503215] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.503220] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.503236] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.503237] vesafb: scrolling: redraw
[ 0.503238] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.503245] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90002000000, using 8128k, total 8128k
[ 0.503305] Console: switching to colour frame buffer device 240x67
[ 0.503318] fb0: VESA VGA frame buffer device
[ 0.503326] intel_idle: MWAIT substates: 0x42120
[ 0.503327] intel_idle: v0.4.1 model 0x3C
[ 0.503328] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.503552] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.503554] ACPI: Power Button [PWRB]
[ 0.503575] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.503576] ACPI: Power Button [PWRF]
[ 0.504031] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.504032] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.504163] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.504164] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.504188] GHES: HEST is not enabled!
[ 0.504249] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.524607] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.525523] Linux agpgart interface v0.103
[ 0.527497] brd: module loaded
[ 0.528314] loop: module loaded
[ 0.528441] libphy: Fixed MDIO Bus: probed
[ 0.528444] tun: Universal TUN/TAP device driver, 1.6
[ 0.528444] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.528469] PPP generic driver version 2.4.2
[ 0.528503] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.528506] ehci-pci: EHCI PCI platform driver
[ 0.528567] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.528570] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.528579] ehci-pci 0000:00:1a.0: debug port 2
[ 0.532460] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.532467] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7e0c000
[ 0.541644] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.541667] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.541668] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.541669] usb usb1: Product: EHCI Host Controller
[ 0.541670] usb usb1: Manufacturer: Linux 4.4.0-38-generic ehci_hcd
[ 0.541671] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.541738] hub 1-0:1.0: USB hub found
[ 0.541741] hub 1-0:1.0: 2 ports detected
[ 0.541858] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.541861] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.541869] ehci-pci 0000:00:1d.0: debug port 2
[ 0.545764] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.545769] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e0b000
[ 0.557674] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.557689] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.557690] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.557691] usb usb2: Product: EHCI Host Controller
[ 0.557692] usb usb2: Manufacturer: Linux 4.4.0-38-generic ehci_hcd
[ 0.557693] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.557750] hub 2-0:1.0: USB hub found
[ 0.557753] hub 2-0:1.0: 2 ports detected
[ 0.557817] ehci-platform: EHCI generic platform driver
[ 0.557824] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.557827] ohci-pci: OHCI PCI platform driver
[ 0.557833] ohci-platform: OHCI generic platform driver
[ 0.557838] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.557873] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.557874] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.558495] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.558587] mousedev: PS/2 mouse device common for all mice
[ 0.558710] rtc_cmos 00:02: RTC can wake from S4
[ 0.558823] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.558843] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.558848] i2c /dev entries driver
[ 0.558876] device-mapper: uevent: version 1.0.3
[ 0.558928] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.558941] Intel P-state driver initializing.
[ 0.559156] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.560133] NET: Registered protocol family 10
[ 0.560651] NET: Registered protocol family 17
[ 0.560704] Key type dns_resolver registered
[ 0.561433] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
[ 0.561464] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
[ 0.561478] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
[ 0.561519] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
[ 0.561563] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x9
[ 0.561593] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x9
[ 0.561613] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x9
[ 0.561634] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x9
[ 0.561788] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.562542] registered taskstats version 1
[ 0.562591] Loading compiled-in X.509 certificates
[ 0.564793] Loaded X.509 cert 'Build time autogenerated kernel key: 777c07dab68ea2292bef256283d37f42a58bcbe2'
[ 0.564851] zswap: loaded using pool lzo/zbud
[ 0.566795] Key type trusted registered
[ 0.569343] Key type encrypted registered
[ 0.569347] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.569350] ima: No TPM chip found, activating TPM-bypass!
[ 0.569361] evm: HMAC attrs: 0x1
[ 0.569717] Magic number: 4:234:984
[ 0.569753] platform PNP0C14:01: hash matches
[ 0.569754] platform PNP0A0A:00: hash matches
[ 0.569757] acpi PNP0C14:01: hash matches
[ 0.569759] acpi PNP0A0A:00: hash matches
[ 0.569846] rtc_cmos 00:02: setting system clock to 2016-10-08 11:59:52 UTC (1475927992)
[ 0.569944] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.569945] EDD information not available.
[ 0.569993] PM: Hibernation image not present or could not be loaded.
[ 0.570557] Freeing unused kernel memory: 1484K (ffffffff81f45000 - ffffffff820b8000)
[ 0.570559] Write protecting the kernel read-only data: 14336k
[ 0.570920] Freeing unused kernel memory: 2040K (ffff880001802000 - ffff880001a00000)
[ 0.571169] Freeing unused kernel memory: 136K (ffff880001dde000 - ffff880001e00000)
[ 0.578464] systemd-udevd[154]: starting version 204
[ 0.581207] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.585747] wmi: Mapper loaded
[ 0.585836] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.591794] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.591800] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.592856] ahci 0000:00:1f.2: version 3.0
[ 0.593002] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x35 impl SATA mode
[ 0.593004] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.593550] [drm] Initialized drm 1.1.0 20060810
[ 0.598528] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc900018b8000, 74:d0:2b:9e:fb:40, XID 0c000800 IRQ 26
[ 0.598530] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.614146] scsi host0: ahci
[ 0.614240] scsi host1: ahci
[ 0.614322] scsi host2: ahci
[ 0.614402] scsi host3: ahci
[ 0.614464] scsi host4: ahci
[ 0.614528] scsi host5: ahci
[ 0.614562] ata1: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a100 irq 25
[ 0.614563] ata2: DUMMY
[ 0.614565] ata3: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a200 irq 25
[ 0.614566] ata4: DUMMY
[ 0.614567] ata5: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a300 irq 25
[ 0.614569] ata6: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a380 irq 25
[ 0.614934] [drm] Memory usable by graphics device = 2048M
[ 0.614937] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 0.614937] fb: switching to inteldrmfb from VESA VGA
[ 0.614954] Console: switching to colour dummy device 80x25
[ 0.615001] [drm] Replacing VGA console driver
[ 0.621124] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.621125] [drm] Driver supports precise vblank timestamp query.
[ 0.621441] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.698366] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.698637] acpi device:62: registered as cooling_device13
[ 0.698680] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.698811] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 0.853644] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.869643] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.889747] fbcon: inteldrmfb (fb0) is primary device
[ 0.889815] Console: switching to colour frame buffer device 240x67
[ 0.889832] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 0.933669] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.933685] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.933700] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.933714] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.933846] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.933850] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff88040f4e0618), AE_NOT_FOUND (20150930/psparse-542)
[ 0.933909] ata5.00: READ LOG DMA EXT failed, trying unqueued
[ 0.933928] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.933929] ata5.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB0Q, max UDMA/133
[ 0.933931] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.934063] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.934066] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff88040f4e0618), AE_NOT_FOUND (20150930/psparse-542)
[ 0.934095] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.934098] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff88040f4e0690), AE_NOT_FOUND (20150930/psparse-542)
[ 0.934137] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.934139] ata5.00: configured for UDMA/133
[ 0.934243] ata6.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[ 0.934245] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.934433] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.934436] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88040f4e0528), AE_NOT_FOUND (20150930/psparse-542)
[ 0.934665] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.934676] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff88040f4e0690), AE_NOT_FOUND (20150930/psparse-542)
[ 0.934700] ata3.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3MA, max UDMA/133
[ 0.934702] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.934815] ata6.00: configured for UDMA/133
[ 0.935272] ata1.00: ATAPI: ATAPI iHAS124 Y, BL0V, max UDMA/100
[ 0.935540] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.935542] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88040f4e0528), AE_NOT_FOUND (20150930/psparse-542)
[ 0.935810] ata3.00: configured for UDMA/133
[ 0.937151] ata1.00: configured for UDMA/100
[ 0.938906] scsi 0:0:0:0: CD-ROM ATAPI iHAS124 Y BL0V PQ: 0 ANSI: 5
[ 0.955192] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.955194] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.955300] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.955395] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.955638] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72101 A3MA PQ: 0 ANSI: 5
[ 0.955855] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 0.955865] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 0.955934] sd 2:0:0:0: [sda] Write Protect is off
[ 0.955938] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.955955] scsi 4:0:0:0: Direct-Access ATA Samsung SSD 840 BB0Q PQ: 0 ANSI: 5
[ 0.955973] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.956056] sd 4:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 0.956067] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 0.956137] sd 4:0:0:0: [sdb] Write Protect is off
[ 0.956139] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.956162] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.956191] scsi 5:0:0:0: Direct-Access ATA WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[ 0.956286] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 0.956287] sd 5:0:0:0: [sdc] 4096-byte physical blocks
[ 0.956298] sd 5:0:0:0: [sdc] Write Protect is off
[ 0.956300] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 0.956306] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 0.956307] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.956442] sdb: sdb1 sdb2 sdb3
[ 0.956640] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 0.960525] sda: sda1 sda2
[ 0.960692] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.985991] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 0.985993] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.986127] hub 1-1:1.0: USB hub found
[ 0.986241] hub 1-1:1.0: 6 ports detected
[ 1.001994] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.001996] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.002239] hub 2-1:1.0: USB hub found
[ 1.002340] hub 2-1:1.0: 8 ports detected
[ 1.011982] sdc: sdc1 sdc2 < sdc5 >
[ 1.012350] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 1.257621] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.352848] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52f
[ 1.352862] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.352863] usb 1-1.1: Product: USB Receiver
[ 1.352864] usb 1-1.1: Manufacturer: Logitech
[ 1.355359] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.358871] usbcore: registered new interface driver usbhid
[ 1.358872] usbhid: USB HID core driver
[ 1.359760] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52F.0001/input/input4
[ 1.359824] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input0
[ 1.360611] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52F.0002/input/input5
[ 1.413814] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input1
[ 1.429623] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 1.497596] tsc: Refined TSC clocksource calibration: 3497.972 MHz
[ 1.497599] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x326bd592a83, max_idle_ns: 440795311901 ns
[ 1.699948] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.016288] random: init: uninitialized urandom read (12 bytes read, 112 bits of entropy available)
[ 2.152766] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0158
[ 2.152768] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.152769] usb 1-1.2: Product: USB2.0-CRW
[ 2.152770] usb 1-1.2: Manufacturer: Generic
[ 2.152771] usb 1-1.2: SerialNumber: 20060413092100000
[ 2.497716] clocksource: Switched to clocksource tsc
[ 2.502220] random: nonblocking pool is initialized
[ 3.627721] Adding 760828k swap on /dev/sdc5. Priority:-1 extents:1 across:760828k FS
[ 3.650565] systemd-udevd[432]: starting version 204
[ 3.670530] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.674058] lp: driver loaded but no devices found
[ 3.678571] ppdev: user-space parallel port driver
[ 3.699077] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.709909] usbcore: registered new interface driver usb-storage
[ 3.711017] usbcore: registered new interface driver uas
[ 3.712043] ums-realtek 1-1.2:1.0: USB Mass Storage device detected
[ 3.714192] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 3.714194] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.714195] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.714196] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.714197] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
[ 3.714198] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.714199] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 3.714200] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 3.714201] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 3.716513] scsi host6: usb-storage 1-1.2:1.0
[ 3.716667] usbcore: registered new interface driver ums-realtek
[ 3.719875] audit: type=1400 audit(1475927995.644:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=544 comm="apparmor_parser"
[ 3.719880] audit: type=1400 audit(1475927995.644:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=544 comm="apparmor_parser"
[ 3.719891] audit: type=1400 audit(1475927995.644:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=544 comm="apparmor_parser"
[ 3.720255] audit: type=1400 audit(1475927995.644:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=544 comm="apparmor_parser"
[ 3.720260] audit: type=1400 audit(1475927995.644:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=544 comm="apparmor_parser"
[ 3.720457] audit: type=1400 audit(1475927995.644:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=544 comm="apparmor_parser"
[ 3.722288] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
[ 3.722350] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
[ 3.729036] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 3.729083] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 3.729129] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 3.729190] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 3.729240] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 3.729292] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 3.729338] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 3.729403] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 3.732681] AVX2 version of gcm_enc/dec engaged.
[ 3.732683] AES CTR mode by8 optimization enabled
[ 3.759772] kvm: disabled by bios
[ 3.797084] cfg80211: World regulatory domain updated:
[ 3.797086] cfg80211: DFS Master region: unset
[ 3.797088] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3.797090] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.797091] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.797093] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.797094] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.797095] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.834933] ath: EEPROM regdomain: 0x809c
[ 3.834935] ath: EEPROM indicates we should expect a country code
[ 3.834936] ath: doing EEPROM country->regdmn map search
[ 3.834936] ath: country maps to regdmn code: 0x52
[ 3.834937] ath: Country alpha2 being used: CN
[ 3.834938] ath: Regpair used: 0x52
[ 3.859729] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 3.859919] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90001dc0000, irq=18
[ 3.861070] cfg80211: Regulatory domain changed to country: CN
[ 3.861072] cfg80211: DFS Master region: unset
[ 3.861073] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3.861074] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.861075] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 3.861076] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 3.861077] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[ 3.861077] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 3.877847] asus_wmi: ASUS WMI generic driver loaded
[ 3.878506] kvm: disabled by bios
[ 3.878942] asus_wmi: Initialization: 0x0
[ 3.878954] asus_wmi: BIOS WMI version: 0.9
[ 3.878973] asus_wmi: SFUN value: 0x0
[ 3.879146] intel_rapl: Found RAPL domain package
[ 3.879148] intel_rapl: Found RAPL domain core
[ 3.879150] intel_rapl: Found RAPL domain uncore
[ 3.879152] intel_rapl: Found RAPL domain dram
[ 3.879161] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input16
[ 3.879232] asus_wmi: Number of fans: 1
[ 3.881273] ath9k 0000:06:00.0 wlan2: renamed from wlan0
[ 3.897436] systemd-udevd[469]: renamed network interface wlan0 to wlan2
[ 3.898969] cfg80211: Regulatory domain changed to country: FR
[ 3.898971] cfg80211: DFS Master region: unset
[ 3.898972] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3.898983] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.898984] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.898985] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 3.898985] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 3.898986] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 4.186568] EXT4-fs (sdb1): re-mounted. Opts: discard,errors=remount-ro
[ 4.377502] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.512685] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.536431] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.725975] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 4.726240] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 4.730054] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 4.821325] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 5.123625] init: failsafe main process (881) killed by TERM signal
[ 5.157548] Bluetooth: Core ver 2.21
[ 5.157557] NET: Registered protocol family 31
[ 5.157558] Bluetooth: HCI device and connection manager initialized
[ 5.157560] Bluetooth: HCI socket layer initialized
[ 5.157562] Bluetooth: L2CAP socket layer initialized
[ 5.157565] Bluetooth: SCO socket layer initialized
[ 5.163214] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.163217] Bluetooth: BNEP filters: protocol multicast
[ 5.163219] Bluetooth: BNEP socket layer initialized
[ 5.165657] Bluetooth: RFCOMM TTY layer initialized
[ 5.165660] Bluetooth: RFCOMM socket layer initialized
[ 5.165663] Bluetooth: RFCOMM ver 1.11
[ 5.177315] audit: type=1400 audit(1475927997.104:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=982 comm="apparmor_parser"
[ 5.177322] audit: type=1400 audit(1475927997.104:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=982 comm="apparmor_parser"
[ 5.177640] audit: type=1400 audit(1475927997.104:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=982 comm="apparmor_parser"
[ 5.216448] init: cups main process (984) killed by HUP signal
[ 5.216454] init: cups main process ended, respawning
[ 5.235838] init: samba-ad-dc main process (956) terminated with status 1
[ 5.315790] r8169 0000:03:00.0 eth0: link down
[ 5.315790] r8169 0000:03:00.0 eth0: link down
[ 5.315846] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.461416] kvm: disabled by bios
[ 6.071266] init: plymouth-upstart-bridge main process ended, respawning
[ 6.074475] init: plymouth-upstart-bridge main process (1669) terminated with status 1
[ 6.074480] init: plymouth-upstart-bridge main process ended, respawning
[ 6.899195] r8169 0000:03:00.0 eth0: link up
[ 6.899203] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 35.222415] audit_printk_skb: 162 callbacks suppressed
[ 35.222417] audit: type=1400 audit(1475928026.645:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2888 comm="apparmor_parser"
[ 35.222420] audit: type=1400 audit(1475928026.645:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2888 comm="apparmor_parser"
[ 35.222618] audit: type=1400 audit(1475928026.645:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2888 comm="apparmor_parser"
[ 317.228070] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 421.659638] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 943.849412] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 996.073213] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1048.300989] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1100.528772] usb 1-1.2: reset high-speed USB device number 4 using ehci-pciSystème à jour et situation inchangée :
Linux Asgard 4.4.0-38-generic #57~14.04.1-Ubuntu SMP Tue Sep 6 17:20:43 UTC 2016 x86_64 x86_64 x86_64 GNU/LinuxQuant à la piste du bios pas à jour c'est intrigant mais sachant que je n'ai pas de windows ici, peut-on le mettre à jour depuis l'interface « graphique » du bios ?
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#9 Le 08/10/2016, à 15:01
- Coeur Noir
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
Bios, suite.
Tu parles de prise usb3, donc on devrait trouver du xhci dans tes dmesg. Or il n'y en a pas un seul. Ça ne me paraît pas normal.
…xhci était désactivé dans le bios, je l'ai donc mis sur auto.
[ 55.643569] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 108.432148] usb 3-6: reset high-speed USB device number 4 using xhci_hcdPour mettre à jour le bios, il y a un outil dans le bios. J'aimerais confirmation que le fichier à « lire » pour le mettre à jour est bien :
Z87-C-ASUS-2103.CAPavant de faire une gaffe irrécupérable !
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#10 Le 08/10/2016, à 15:10
- moko138
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
Le device number 4, c'est ton lecteur de cartes Realtek, le 0158.
S'il est externe, débranche-le (sauf le temps de l'utiliser).
S'il est intégré, et sans protection depuis plus d'un an, il est probablement inutilisable pour les mêmes raisons que celui-ci :
En ce cas, s'il est dans une tour, débranche-le,
s'il est dans un portable, blackliste son module.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#11 Le 08/10/2016, à 15:13
- moko138
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
Et si tu n'as aucun périphérique usb3, tu as raison de désactiver l'usb3 dans le bios !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#12 Le 08/10/2016, à 15:36
- Coeur Noir
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
Jusque là je n'avais pas remarqué de gros écueils avec le lecteur de cartes / port usb sur lequel est connecté le récepteur de la souris sans fil. Ce multi-reader est dans une tour.
Hormis l'impossibilité de lire une carte mémoire sdhc nikon formatée par l'appareil photo. J'accède aux données de cette carte en la laissant dans l'APN connecté via cable usb ce qui me fait davantage soupçonner un problème logiciel, un formatage un peu exclusif à Nikon pas compatible avec Linux ?
Quant à l'usb3 j'ai bien quelque fois des gros transferts à effectuer sur DD externe… ( que j'avais donc effectués à des vitesses d'usb 2 si je comprends bien ? )
…comment vois-tu que le device number 4 est le multi-reader ? D'un dmesg à l'autre device number 4 est associé à usb 3-6 ou à usb 1-1-2… c'est pas une mise en doute de ton info, c'est une demande d'explication ;-)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#13 Le 08/10/2016, à 16:22
- moko138
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
1) Une FAT propre à Nikon, ça se saurait !
Branche ta carte dans un lecteur externe propre, et je parie que tes linux la liront les doigts dans le nez. (C'est ce que je faisais avant.)
Cela dit, surtout dans le cas des microSD, laisser la carte dans l'appareil photo, trappe bien fermée, est une meilleure protection des contacts de la carte et surtout de l'APN contre les entrées de poussière. (C'est ce que je fais maintenant).
Le pire, m'avait expliqué un vendeur de la Fnac, après qu'une de mes cartes s'était mise en rideau, ce sont les poussières et la corrosion des contacts à l'intérieur des adaptateurs SD/microSD.
2) usb3/bios : vois le message #11 de 15h13.
3) Que le device number 4 est le multi-reader
Dans le dmesg en #8, on lit :
[ 1.352863] usb 1-1.1: Product: USB Receiver
[ 1.352864] usb 1-1.1: Manufacturer: Logitech
[ (...) (aucune ligne intermédiaire en usb 1.1-2) ]
[ 1.429623] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ (...) (aucune ligne intermédiaire en usb)]
[ 2.152766] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0158
Ensuite on cherche sur la toile "0bda:0158", et voilà.
Mince ! Si je n'avais rien expliqué, j'aurais pu passer pour un magicien...
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#14 Le 08/10/2016, à 16:51
- Coeur Noir
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
Ok, merci pour la méthode, Dumbledore ( ou Gandalf ) ?
Sauf que mon dmesg maintenant dit :
[ 1.414959] usb 3-6: new high-speed USB device number 4 using xhci_hcd
(…)
[ 2.057574] usb 3-6: New USB device found, idVendor=0bda, idProduct=0158
[ 2.057576] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.057577] usb 3-6: Product: USB2.0-CRW
[ 2.057578] usb 3-6: Manufacturer: Generic
[ 2.057579] usb 3-6: SerialNumber: 20060413092100000
(…)
[ 4.534911] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
(…)
[ 55.643569] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 108.432148] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 161.108722] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 213.897271] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 266.629809] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 319.362422] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 372.090958] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 424.827549] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 477.556093] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 530.296688] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 582.973268] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 635.765834] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 688.490388] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 741.166960] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 793.955529] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 846.688091] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 899.420659] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 899.808631] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 952.153236] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1004.833755] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1057.614332] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1110.346889] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1163.083448] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1215.760064] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1268.544568] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1321.229194] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1321.613173] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1374.013720] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1426.746326] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1479.478897] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1532.207483] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1584.939988] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1637.620598] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1690.413162] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1743.141734] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1795.826316] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1848.554836] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1901.335379] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1901.671381] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1954.016008] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2006.804583] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2059.537144] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2112.213688] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2165.002267] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2165.386248] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2217.734832] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2270.415406] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2323.199926] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2323.587924] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2375.928519] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2401.214843] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2427.077203] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2479.861738] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2532.594334] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2532.922310] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2585.342934] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2638.075484] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2690.808040] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2743.476620] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2796.257122] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2848.989740] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2901.722295] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2902.106289] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2954.454871] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3007.187429] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3007.571410] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3059.868004] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3112.596658] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3165.401105] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3218.117666] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3241.216062] sdd: detected capacity change from 32027705344 to 0 |→ ici c'est l'éjection d'une clé usb 32go qui était connectée sur un port usb3
[ 3246.479023] usb 3-1: USB disconnect, device number 2 |→ en façade de la tour mais pas sur le multi-card reader
[ 3270.854269] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3323.578856] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3376.267439] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3429.047969] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3481.804566] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3534.461110] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3587.245681] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3639.930284] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3692.710796] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3693.094772] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3745.439351] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3745.779326] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3798.171919] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3850.904510] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3903.637080] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 3956.369620] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4009.050220] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4061.326801] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4114.007369] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4114.387406] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4166.787947] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4219.524513] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4272.205082] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4272.597017] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4324.985648] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4377.722181] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4430.470799] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4483.207365] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4535.939948] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4588.652483] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4641.385047] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4694.069634] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4746.846143] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4820.309401] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4852.311287] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4905.043884] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4957.724411] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 5010.513018] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 5063.245585] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 5115.974152] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 5168.714776] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 5221.443290] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 5274.179855] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 5326.908422] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 5379.640936] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 5432.373567] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 5485.102065] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 5537.838691] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 5590.571222] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 5643.315791] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 5696.036399] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 5748.716958] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 5801.501515] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 5854.194118] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 5906.914663] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 5959.699224] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 6012.379793] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 6065.164301] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 6117.904951] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 6170.649482] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 6223.322060] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 6276.118659] usb 3-6: reset high-speed USB device number 4 using xhci_hcdC'est normal que ça ait changé de « dénomination » de usb 1-1-* à usb 3-* ?
D'autant que ce multi-reader n'a pas à ma connaissance d'usb3 → il ne serait pas connecté au bon endroit sur la carte-mère ?
Ou une astuce autour de l'état actif / en repos ?
Reste la question de la mise à jour du bios, j'aimerais confirmation que le fichier à « lire » pour le mettre à jour est bien :
Z87-C-ASUS-2103.CAPavant de faire une gaffe irrécupérable !
Dernière modification par Coeur Noir (Le 08/10/2016, à 17:13)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#15 Le 08/10/2016, à 18:13
- moko138
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
Pour la mise à jour du bios je suis incompétent.
J'ai juste souvent lu le conseil de ne pas prendre le risque de flasher un pc qui tourne bien.
Vois avec MicP, s'il est sûr de lui.
- -
Ce n'est pas le branchement qui est mauvais, c'est ton noyau qui fait des tests : "xhci, ehci ?" Et c'est normal. À une époque, ma Xubuntu 12.04 n'arrêtait pas d'osciller entre usb1 et usb2 pour mon hub (et ce qui était branché dessus).
Si tu veux que je lise le nouveau dmesg, donne toutes les 1000 premières lignes. Tu as bien vu qu'il fallait - dans ton cas - les comparer à la suite pour pouvoir en tirer une conclusion tenant la route.
Photographie les fentes bien éclairées de ton lecteur de cartes, qu'on rigole !
Celui dont tu as vu la photo, je l'ai débranché et mis à la poubelle : même l'aspirateur était impuissant.
As-tu un périphérique en usb3 ?
Tour ou portable ?
Àune époque, j'ai beaucoup fréquenté Gandalf et Bilbo, mais pour Dumbledore, j'ai besoin de me renseigner.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#16 Le 08/10/2016, à 18:38
- Coeur Noir
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
Les 1000 premières lignes :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-38-generic (buildd@lgw01-22) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #57~14.04.1-Ubuntu SMP Tue Sep 6 17:20:43 UTC 2016 (Ubuntu 4.4.0-38.57~14.04.1-generic 4.4.19)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-38-generic root=UUID=a7428baa-93fd-48e8-922d-637da9044d2f ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9795fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9796000-0x00000000b979cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b979d000-0x00000000b9be5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9be6000-0x00000000ba02cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba02d000-0x00000000cc66cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cc66d000-0x00000000cc874fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cc875000-0x00000000cc88afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cc88b000-0x00000000ccdcbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ccdcc000-0x00000000cdffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cdfff000-0x00000000cdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUS All Series/Z87-C, BIOS 1007 05/17/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 4 base 00CF000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 041FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 16GB, type WB
[ 0.000000] reg 1, base: 16GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 4, base: 3312MB, range: 16MB, type UC
[ 0.000000] reg 5, base: 16894MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 16110M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3312MB, range: 16MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 5, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 6, base: 16GB, range: 512MB, type WB
[ 0.000000] reg 7, base: 16894MB, range: 2MB, type UC
[ 0.000000] e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd890-0x000fd89f] mapped at [ffff8800000fd890]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[ 0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[ 0.000000] BRK [0x02206000, 0x02206fff] PGTABLE
[ 0.000000] BRK [0x02207000, 0x02207fff] PGTABLE
[ 0.000000] BRK [0x02208000, 0x02208fff] PGTABLE
[ 0.000000] BRK [0x02209000, 0x02209fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3416a000-0x360acfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CC879078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CC885B28 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CC879180 00C9A1 (v02 ALASKA A M I 00000024 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000CCDCA080 000040
[ 0.000000] ACPI: APIC 0x00000000CC885C38 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CC885CD0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CC885D18 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000CC886258 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000CC886D30 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CC886D70 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CC886DA8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000CC887118 00329E (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41fdf6000-0x41fdfafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b9795fff]
[ 0.000000] node 0: [mem 0x00000000b979d000-0x00000000b9be5fff]
[ 0.000000] node 0: [mem 0x00000000ba02d000-0x00000000cc66cfff]
[ 0.000000] node 0: [mem 0x00000000cdfff000-0x00000000cdffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
[ 0.000000] On node 0 totalpages: 4112316
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13001 pages used for memmap
[ 0.000000] DMA32 zone: 832032 pages, LIFO batch:31
[ 0.000000] Normal zone: 51192 pages used for memmap
[ 0.000000] Normal zone: 3276288 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcf200000-0xdf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9796000-0xb979cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9be6000-0xba02cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc66d000-0xcc874fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc875000-0xcc88afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc88b000-0xccdcbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xccdcc000-0xcdffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce000000-0xceffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88041fa00000 s98008 r8192 d28968 u262144
[ 0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4048038
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-38-generic root=UUID=a7428baa-93fd-48e8-922d-637da9044d2f ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16073248K/16449264K available (8187K kernel code, 1292K rwdata, 3960K rodata, 1484K init, 1292K bss, 376016K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:488 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3498.200 MHz processor
[ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6996.40 BogoMIPS (lpj=13992800)
[ 0.000022] pid_max: default: 32768 minimum: 301
[ 0.000025] ACPI: Core revision 20150930
[ 0.006539] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.006553] Security Framework initialized
[ 0.006554] Yama: becoming mindful.
[ 0.006565] AppArmor: AppArmor initialized
[ 0.007213] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.009371] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010327] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.010338] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.010521] Initializing cgroup subsys io
[ 0.010523] Initializing cgroup subsys memory
[ 0.010528] Initializing cgroup subsys devices
[ 0.010529] Initializing cgroup subsys freezer
[ 0.010531] Initializing cgroup subsys net_cls
[ 0.010532] Initializing cgroup subsys perf_event
[ 0.010534] Initializing cgroup subsys net_prio
[ 0.010536] Initializing cgroup subsys hugetlb
[ 0.010537] Initializing cgroup subsys pids
[ 0.010553] CPU: Physical Processor ID: 0
[ 0.010554] CPU: Processor Core ID: 0
[ 0.010557] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.010557] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.011291] mce: CPU supports 9 MCE banks
[ 0.011301] CPU0: Thermal monitoring enabled (TM1)
[ 0.011308] process: using mwait in idle threads
[ 0.011310] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.011311] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.011549] Freeing SMP alternatives memory: 28K (ffffffff820b8000 - ffffffff820bf000)
[ 0.023646] ftrace: allocating 32041 entries in 126 pages
[ 0.032975] smpboot: Max logical packages: 2
[ 0.032977] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.033343] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073027] TSC deadline timer enabled
[ 0.073029] smpboot: CPU0: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.073041] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.073054] ... version: 3
[ 0.073055] ... bit width: 48
[ 0.073055] ... generic registers: 4
[ 0.073056] ... value mask: 0000ffffffffffff
[ 0.073056] ... max period: 0000ffffffffffff
[ 0.073057] ... fixed-purpose events: 3
[ 0.073057] ... event mask: 000000070000000f
[ 0.073632] x86: Booting SMP configuration:
[ 0.073633] .... node #0, CPUs: #1
[ 0.076790] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.076838] #2 #3 #4 #5 #6 #7
[ 0.095803] x86: Booted up 1 node, 8 CPUs
[ 0.095806] smpboot: Total of 8 processors activated (55971.20 BogoMIPS)
[ 0.102534] devtmpfs: initialized
[ 0.104524] evm: security.selinux
[ 0.104525] evm: security.SMACK64
[ 0.104525] evm: security.SMACK64EXEC
[ 0.104526] evm: security.SMACK64TRANSMUTE
[ 0.104526] evm: security.SMACK64MMAP
[ 0.104527] evm: security.ima
[ 0.104527] evm: security.capability
[ 0.104568] PM: Registering ACPI NVS region [mem 0xb9796000-0xb979cfff] (28672 bytes)
[ 0.104569] PM: Registering ACPI NVS region [mem 0xcc88b000-0xccdcbfff] (5509120 bytes)
[ 0.104667] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.104726] pinctrl core: initialized pinctrl subsystem
[ 0.104803] RTC time: 14:56:51, date: 10/08/16
[ 0.104881] NET: Registered protocol family 16
[ 0.114436] cpuidle: using governor ladder
[ 0.134431] cpuidle: using governor menu
[ 0.134434] PCCT header not found.
[ 0.134484] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.134485] ACPI: bus type PCI registered
[ 0.134486] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.134536] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.134538] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.134544] PCI: Using configuration type 1 for base access
[ 0.134568] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.146671] ACPI: Added _OSI(Module Device)
[ 0.146672] ACPI: Added _OSI(Processor Device)
[ 0.146673] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.146674] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.148828] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.150342] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.150620] ACPI: Dynamic OEM Table Load:
[ 0.150623] ACPI: SSDT 0xFFFF88040D019400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.151016] ACPI: Dynamic OEM Table Load:
[ 0.151019] ACPI: SSDT 0xFFFF88040D471800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.151432] ACPI: Dynamic OEM Table Load:
[ 0.151434] ACPI: SSDT 0xFFFF88040D009800 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.152429] ACPI : EC: EC started
[ 0.152437] ACPI: Interpreter enabled
[ 0.152442] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.152445] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.152455] ACPI: (supports S0 S3 S4 S5)
[ 0.152456] ACPI: Using IOAPIC for interrupt routing
[ 0.152470] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.157460] ACPI: Power Resource [FN00] (off)
[ 0.157505] ACPI: Power Resource [FN01] (off)
[ 0.157549] ACPI: Power Resource [FN02] (off)
[ 0.157591] ACPI: Power Resource [FN03] (off)
[ 0.157633] ACPI: Power Resource [FN04] (off)
[ 0.158125] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.158129] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.158246] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.158319] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.158320] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.158551] PCI host bridge to bus 0000:00
[ 0.158553] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.158554] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.158555] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.158556] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.158557] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.158558] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.158559] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.158559] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.158560] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.158561] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.158562] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.158567] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.158623] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.158646] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.158699] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.158725] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.158734] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.158738] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.158741] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.158790] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.158798] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit]
[ 0.158864] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.158884] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[ 0.158925] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.158950] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.158972] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.158993] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1e000-0xf7e1e00f 64bit]
[ 0.159037] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.159088] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.159111] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c3ff]
[ 0.159171] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.159205] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.159229] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.159249] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
[ 0.159297] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.159323] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.159345] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.159396] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.159441] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.159464] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.159515] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.159559] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.159581] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[ 0.159632] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.159676] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.159700] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 0.159751] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.159795] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.159819] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.159842] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff]
[ 0.159902] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.159935] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.159959] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
[ 0.160086] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.160102] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.160108] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.160113] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.160119] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.160124] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.160130] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff]
[ 0.160151] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.160192] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.160205] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit]
[ 0.160221] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.160292] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.160334] acpiphp: Slot [1] registered
[ 0.160337] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.160391] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.160427] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.160452] pci 0000:03:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit]
[ 0.160468] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.160533] pci 0000:03:00.0: supports D1 D2
[ 0.160534] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.160568] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.166455] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.166457] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.166459] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.166463] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.166506] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[ 0.166595] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.166613] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
[ 0.166619] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.166620] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.166621] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.166622] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.166623] pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.166624] pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.166625] pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.166626] pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.166627] pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.166628] pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.166714] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.166731] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.166732] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.166733] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.166734] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.166734] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.166735] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.166737] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.166738] pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.166739] pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.166740] pci 0000:04:00.0: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.166798] pci 0000:06:00.0: [168c:002e] type 00 class 0x028000
[ 0.166835] pci 0000:06:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 0.166932] pci 0000:06:00.0: supports D1
[ 0.166933] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[ 0.166964] pci 0000:06:00.0: System wakeup disabled by ACPI
[ 0.174456] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.174460] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.174947] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.174977] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.175004] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.175031] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.175057] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.175084] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.175110] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.175136] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.175346] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.175365] ACPI : EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
[ 0.175425] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.175426] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.175428] vgaarb: loaded
[ 0.175429] vgaarb: bridge control possible 0000:00:02.0
[ 0.175563] SCSI subsystem initialized
[ 0.175582] libata version 3.00 loaded.
[ 0.175596] ACPI: bus type USB registered
[ 0.175605] usbcore: registered new interface driver usbfs
[ 0.175610] usbcore: registered new interface driver hub
[ 0.175622] usbcore: registered new device driver usb
[ 0.175700] PCI: Using ACPI for IRQ routing
[ 0.176826] PCI: pci_cache_line_size set to 64 bytes
[ 0.176862] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.176863] e820: reserve RAM buffer [mem 0xb9796000-0xbbffffff]
[ 0.176864] e820: reserve RAM buffer [mem 0xb9be6000-0xbbffffff]
[ 0.176865] e820: reserve RAM buffer [mem 0xcc66d000-0xcfffffff]
[ 0.176866] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[ 0.176866] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[ 0.176936] NetLabel: Initializing
[ 0.176937] NetLabel: domain hash size = 128
[ 0.176937] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.176944] NetLabel: unlabeled traffic allowed by default
[ 0.176984] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.176987] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.178995] amd_nb: Cannot enumerate AMD northbridges
[ 0.179006] clocksource: Switched to clocksource hpet
[ 0.182631] AppArmor: AppArmor Filesystem Enabled
[ 0.182662] pnp: PnP ACPI init
[ 0.182705] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.182708] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.182802] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.182803] system 00:01: [io 0xffff] has been reserved
[ 0.182804] system 00:01: [io 0xffff] has been reserved
[ 0.182805] system 00:01: [io 0xffff] has been reserved
[ 0.182806] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.182807] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.182808] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.182809] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.182810] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.182811] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.182812] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.182825] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.182852] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.182854] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.182900] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.182901] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.182929] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.182930] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.183068] pnp 00:06: [dma 0 disabled]
[ 0.183096] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.183119] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.183360] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.183361] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.183362] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.183363] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.183364] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.183365] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.183366] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.183367] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.183369] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.183371] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.183372] system 00:08: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.183373] system 00:08: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.183374] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.183521] pnp: PnP ACPI: found 9 devices
[ 0.189110] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.189146] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.189150] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.189158] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.189160] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.189163] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.189165] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.189169] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.189184] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[ 0.189192] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.189195] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.189201] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.189202] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.189203] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.189204] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.189205] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.189206] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.189207] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.189207] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.189208] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.189209] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.189210] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.189211] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.189212] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.189213] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.189214] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.189215] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.189216] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.189217] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.189218] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.189219] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.189219] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.189220] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.189221] pci_bus 0000:04: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.189222] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.189223] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.189224] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.189225] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.189226] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.189227] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.189228] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.189228] pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.189229] pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.189230] pci_bus 0000:05: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.189231] pci_bus 0000:06: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.189250] NET: Registered protocol family 2
[ 0.189357] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.189494] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.189606] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.189625] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.189660] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.189718] NET: Registered protocol family 1
[ 0.189727] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.189988] PCI: CLS 64 bytes, default 64
[ 0.190017] Trying to unpack rootfs image as initramfs...
[ 0.501679] Freeing initrd memory: 32012K (ffff88003416a000 - ffff8800360ad000)
[ 0.501687] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.501689] software IO TLB [mem 0xc866d000-0xcc66d000] (64MB) mapped at [ffff8800c866d000-ffff8800cc66cfff]
[ 0.501743] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.501744] hw unit of domain pp0-core 2^-14 Joules
[ 0.501745] hw unit of domain package 2^-14 Joules
[ 0.501745] hw unit of domain dram 2^-14 Joules
[ 0.501746] hw unit of domain pp1-gpu 2^-14 Joules
[ 0.501873] Scanning for low memory corruption every 60 seconds
[ 0.502116] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.502144] audit: initializing netlink subsys (disabled)
[ 0.502154] audit: type=2000 audit(1475938611.488:1): initialized
[ 0.502447] Initialise system trusted keyring
[ 0.502536] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.502536] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.503436] zbud: loaded
[ 0.503560] VFS: Disk quotas dquot_6.6.0
[ 0.503580] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.503739] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.503883] fuse init (API version 7.23)
[ 0.503963] Key type big_key registered
[ 0.503974] Allocating IMA MOK and blacklist keyrings.
[ 0.504214] Key type asymmetric registered
[ 0.504216] Asymmetric key parser 'x509' registered
[ 0.504238] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.504266] io scheduler noop registered
[ 0.504268] io scheduler deadline registered (default)
[ 0.504286] io scheduler cfq registered
[ 0.504631] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.504636] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.504653] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.504654] vesafb: scrolling: redraw
[ 0.504655] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.504663] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90002000000, using 8128k, total 8128k
[ 0.504731] Console: switching to colour frame buffer device 240x67
[ 0.504745] fb0: VESA VGA frame buffer device
[ 0.504753] intel_idle: MWAIT substates: 0x42120
[ 0.504754] intel_idle: v0.4.1 model 0x3C
[ 0.504755] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.504990] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.504993] ACPI: Power Button [PWRB]
[ 0.505015] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.505017] ACPI: Power Button [PWRF]
[ 0.505479] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.505480] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.505612] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.505612] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.505636] GHES: HEST is not enabled!
[ 0.505699] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.526056] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.526976] Linux agpgart interface v0.103
[ 0.528951] brd: module loaded
[ 0.529824] loop: module loaded
[ 0.529955] libphy: Fixed MDIO Bus: probed
[ 0.529958] tun: Universal TUN/TAP device driver, 1.6
[ 0.529958] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.529984] PPP generic driver version 2.4.2
[ 0.530020] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.530023] ehci-pci: EHCI PCI platform driver
[ 0.530083] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.530087] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.530096] ehci-pci 0000:00:1a.0: debug port 2
[ 0.533983] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.533991] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7e1c000
[ 0.542991] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.543013] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.543014] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.543015] usb usb1: Product: EHCI Host Controller
[ 0.543016] usb usb1: Manufacturer: Linux 4.4.0-38-generic ehci_hcd
[ 0.543017] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.543087] hub 1-0:1.0: USB hub found
[ 0.543090] hub 1-0:1.0: 2 ports detected
[ 0.543209] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.543212] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.543220] ehci-pci 0000:00:1d.0: debug port 2
[ 0.547104] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.547109] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000
[ 0.559037] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.559056] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.559057] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.559058] usb usb2: Product: EHCI Host Controller
[ 0.559059] usb usb2: Manufacturer: Linux 4.4.0-38-generic ehci_hcd
[ 0.559060] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.559129] hub 2-0:1.0: USB hub found
[ 0.559131] hub 2-0:1.0: 2 ports detected
[ 0.559202] ehci-platform: EHCI generic platform driver
[ 0.559209] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.559213] ohci-pci: OHCI PCI platform driver
[ 0.559220] ohci-platform: OHCI generic platform driver
[ 0.559225] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.559290] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.559293] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.560349] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.560353] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.560399] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.560399] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.560400] usb usb3: Product: xHCI Host Controller
[ 0.560401] usb usb3: Manufacturer: Linux 4.4.0-38-generic xhci-hcd
[ 0.560402] usb usb3: SerialNumber: 0000:00:14.0
[ 0.560468] hub 3-0:1.0: USB hub found
[ 0.560479] hub 3-0:1.0: 14 ports detected
[ 0.561883] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.561885] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.561901] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.561902] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.561903] usb usb4: Product: xHCI Host Controller
[ 0.561903] usb usb4: Manufacturer: Linux 4.4.0-38-generic xhci-hcd
[ 0.561904] usb usb4: SerialNumber: 0000:00:14.0
[ 0.561968] hub 4-0:1.0: USB hub found
[ 0.561974] hub 4-0:1.0: 6 ports detected
[ 0.562610] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.562611] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.563237] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.563307] mousedev: PS/2 mouse device common for all mice
[ 0.563392] rtc_cmos 00:02: RTC can wake from S4
[ 0.563493] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.563513] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.563518] i2c /dev entries driver
[ 0.563547] device-mapper: uevent: version 1.0.3
[ 0.563589] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.563603] Intel P-state driver initializing.
[ 0.563799] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.564676] NET: Registered protocol family 10
[ 0.565095] NET: Registered protocol family 17
[ 0.565120] Key type dns_resolver registered
[ 0.565840] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
[ 0.565884] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
[ 0.565899] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
[ 0.565941] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
[ 0.565997] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x9
[ 0.566028] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x9
[ 0.566047] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x9
[ 0.566093] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x9
[ 0.566180] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.566529] registered taskstats version 1
[ 0.566575] Loading compiled-in X.509 certificates
[ 0.568798] Loaded X.509 cert 'Build time autogenerated kernel key: 777c07dab68ea2292bef256283d37f42a58bcbe2'
[ 0.568855] zswap: loaded using pool lzo/zbud
[ 0.571624] Key type trusted registered
[ 0.574323] Key type encrypted registered
[ 0.574328] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.574330] ima: No TPM chip found, activating TPM-bypass!
[ 0.574342] evm: HMAC attrs: 0x1
[ 0.574708] Magic number: 4:2:940
[ 0.574820] rtc_cmos 00:02: setting system clock to 2016-10-08 14:56:51 UTC (1475938611)
[ 0.574877] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.574878] EDD information not available.
[ 0.574926] PM: Hibernation image not present or could not be loaded.
[ 0.575495] Freeing unused kernel memory: 1484K (ffffffff81f45000 - ffffffff820b8000)
[ 0.575496] Write protecting the kernel read-only data: 14336k
[ 0.575848] Freeing unused kernel memory: 2040K (ffff880001802000 - ffff880001a00000)
[ 0.576100] Freeing unused kernel memory: 136K (ffff880001dde000 - ffff880001e00000)
[ 0.583447] systemd-udevd[154]: starting version 204
[ 0.584985] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.590548] wmi: Mapper loaded
[ 0.590606] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.597009] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.597015] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.597623] ahci 0000:00:1f.2: version 3.0
[ 0.597757] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x35 impl SATA mode
[ 0.597759] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.600398] [drm] Initialized drm 1.1.0 20060810
[ 0.603944] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc900018b8000, 74:d0:2b:9e:fb:40, XID 0c000800 IRQ 27
[ 0.603946] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.619415] scsi host0: ahci
[ 0.619483] scsi host1: ahci
[ 0.619538] scsi host2: ahci
[ 0.619591] scsi host3: ahci
[ 0.619647] scsi host4: ahci
[ 0.619701] scsi host5: ahci
[ 0.619727] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 26
[ 0.619728] ata2: DUMMY
[ 0.619730] ata3: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a200 irq 26
[ 0.619731] ata4: DUMMY
[ 0.619732] ata5: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a300 irq 26
[ 0.619733] ata6: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a380 irq 26
[ 0.620105] [drm] Memory usable by graphics device = 2048M
[ 0.620108] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 0.620109] fb: switching to inteldrmfb from VESA VGA
[ 0.620126] Console: switching to colour dummy device 80x25
[ 0.620172] [drm] Replacing VGA console driver
[ 0.626302] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.626303] [drm] Driver supports precise vblank timestamp query.
[ 0.626705] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.855015] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.870994] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.871001] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 0.938977] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.938992] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.939006] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.939020] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.939393] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.939397] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff88040f4e0690), AE_NOT_FOUND (20150930/psparse-542)
[ 0.939537] ata6.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[ 0.939539] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.939716] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.939719] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88040f4e0528), AE_NOT_FOUND (20150930/psparse-542)
[ 0.939945] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.939948] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff88040f4e0690), AE_NOT_FOUND (20150930/psparse-542)
[ 0.939981] ata3.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3MA, max UDMA/133
[ 0.939982] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.940079] ata6.00: configured for UDMA/133
[ 0.940634] ata1.00: ATAPI: ATAPI iHAS124 Y, BL0V, max UDMA/100
[ 0.940825] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.940828] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff88040f4e0618), AE_NOT_FOUND (20150930/psparse-542)
[ 0.940850] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.940853] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88040f4e0528), AE_NOT_FOUND (20150930/psparse-542)
[ 0.940940] ata5.00: READ LOG DMA EXT failed, trying unqueued
[ 0.940998] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.940999] ata5.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB0Q, max UDMA/133
[ 0.941000] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.941105] ata3.00: configured for UDMA/133
[ 0.941155] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.941157] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff88040f4e0618), AE_NOT_FOUND (20150930/psparse-542)
[ 0.941212] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.941213] ata5.00: configured for UDMA/133
[ 0.942495] ata1.00: configured for UDMA/100
[ 0.944279] scsi 0:0:0:0: CD-ROM ATAPI iHAS124 Y BL0V PQ: 0 ANSI: 5
[ 0.960536] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.960538] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.960633] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.960681] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.960830] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72101 A3MA PQ: 0 ANSI: 5
[ 0.960973] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 0.960992] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 0.961065] scsi 4:0:0:0: Direct-Access ATA Samsung SSD 840 BB0Q PQ: 0 ANSI: 5
[ 0.961074] sd 2:0:0:0: [sda] Write Protect is off
[ 0.961076] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.961092] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.961163] sd 4:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 0.961232] sd 4:0:0:0: [sdb] Write Protect is off
[ 0.961234] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.961248] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 0.961256] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.961362] scsi 5:0:0:0: Direct-Access ATA WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[ 0.961457] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 0.961458] sd 5:0:0:0: [sdc] 4096-byte physical blocks
[ 0.961469] sd 5:0:0:0: [sdc] Write Protect is off
[ 0.961470] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 0.961475] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.961481] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 0.961535] sdb: sdb1 sdb2 sdb3
[ 0.961724] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 0.979244] sda: sda1 sda2
[ 0.979788] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.991395] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 0.991397] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.991655] hub 1-1:1.0: USB hub found
[ 0.991769] hub 1-1:1.0: 6 ports detected
[ 1.003140] usb 3-1: New USB device found, idVendor=13fe, idProduct=3600
[ 1.003142] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.003143] usb 3-1: Product: USB DISK 2.0
[ 1.003144] usb 3-1: Manufacturer:
[ 1.003145] usb 3-1: SerialNumber: 07022949B0D3A437
[ 1.005040] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 1.005097] usb-storage 3-1:1.0: Quirks match for vid 13fe pid 3600: 4000
[ 1.005114] scsi host6: usb-storage 3-1:1.0
[ 1.005160] usbcore: registered new interface driver usb-storage
[ 1.005963] usbcore: registered new interface driver uas
[ 1.007246] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.007247] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.007386] hub 2-1:1.0: USB hub found
[ 1.007496] hub 2-1:1.0: 8 ports detected
[ 1.011222] sdc: sdc1 sdc2 < sdc5 >
[ 1.011352] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 1.075045] fbcon: inteldrmfb (fb0) is primary device
[ 1.075092] Console: switching to colour frame buffer device 240x67
[ 1.075108] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.076879] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.077137] acpi device:62: registered as cooling_device13
[ 1.077180] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.077272] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 1.118958] usb 3-5: new full-speed USB device number 3 using xhci_hcd
[ 1.248947] usb 3-5: New USB device found, idVendor=046d, idProduct=c52f
[ 1.248949] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.248950] usb 3-5: Product: USB Receiver
[ 1.248951] usb 3-5: Manufacturer: Logitech
[ 1.251524] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.254328] usbcore: registered new interface driver usbhid
[ 1.254329] usbhid: USB HID core driver
[ 1.255229] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:046D:C52F.0001/input/input4
[ 1.255296] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-5/input0
[ 1.255930] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:046D:C52F.0002/input/input5
[ 1.311189] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-5/input1
[ 1.414959] usb 3-6: new high-speed USB device number 4 using xhci_hcd
[ 1.498972] tsc: Refined TSC clocksource calibration: 3497.972 MHz
[ 1.498987] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x326bd592a83, max_idle_ns: 440795311901 ns
[ 1.751485] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.878337] random: init: uninitialized urandom read (12 bytes read, 112 bits of entropy available)
[ 2.004078] scsi 6:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 2.004413] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 2.005043] sd 6:0:0:0: [sdd] 62554112 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.006015] sd 6:0:0:0: [sdd] Write Protect is off
[ 2.006017] sd 6:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 2.006975] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2.006978] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2.011961] sdd: sdd1
[ 2.014652] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 2.034021] random: nonblocking pool is initialized
[ 2.057574] usb 3-6: New USB device found, idVendor=0bda, idProduct=0158
[ 2.057576] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.057577] usb 3-6: Product: USB2.0-CRW
[ 2.057578] usb 3-6: Manufacturer: Generic
[ 2.057579] usb 3-6: SerialNumber: 20060413092100000
[ 2.498990] clocksource: Switched to clocksource tsc
[ 3.263947] Adding 760828k swap on /dev/sdc5. Priority:-1 extents:1 across:760828k FS
[ 3.291932] systemd-udevd[429]: starting version 204
[ 3.312717] lp: driver loaded but no devices found
[ 3.313497] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.323687] ppdev: user-space parallel port driver
[ 3.335457] EXT4-fs (sdb1): re-mounted. Opts: discard,errors=remount-ro
[ 3.355233] ums-realtek 3-6:1.0: USB Mass Storage device detected
[ 3.356428] AVX2 version of gcm_enc/dec engaged.
[ 3.356430] AES CTR mode by8 optimization enabled
[ 3.358510] scsi host7: usb-storage 3-6:1.0
[ 3.358690] usbcore: registered new interface driver ums-realtek
[ 3.412383] audit: type=1400 audit(1475938614.332:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=584 comm="apparmor_parser"
[ 3.412387] audit: type=1400 audit(1475938614.332:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=584 comm="apparmor_parser"
[ 3.412389] audit: type=1400 audit(1475938614.332:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=584 comm="apparmor_parser"
[ 3.412599] audit: type=1400 audit(1475938614.332:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=584 comm="apparmor_parser"
[ 3.412602] audit: type=1400 audit(1475938614.332:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=584 comm="apparmor_parser"
[ 3.412711] audit: type=1400 audit(1475938614.332:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=584 comm="apparmor_parser"
[ 3.464870] ath: EEPROM regdomain: 0x809c
[ 3.464871] ath: EEPROM indicates we should expect a country code
[ 3.464872] ath: doing EEPROM country->regdmn map search
[ 3.464873] ath: country maps to regdmn code: 0x52
[ 3.464873] ath: Country alpha2 being used: CN
[ 3.464874] ath: Regpair used: 0x52
[ 3.493249] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 3.493608] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90001d80000, irq=18
[ 3.498117] kvm: disabled by bios
[ 3.510409] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.512465] intel_rapl: Found RAPL domain package
[ 3.512468] intel_rapl: Found RAPL domain core
[ 3.512469] intel_rapl: Found RAPL domain uncore
[ 3.512471] intel_rapl: Found RAPL domain dram
[ 3.513841] asus_wmi: ASUS WMI generic driver loaded
[ 3.515058] asus_wmi: Initialization: 0x0
[ 3.519082] asus_wmi: BIOS WMI version: 0.9
[ 3.519105] asus_wmi: SFUN value: 0x0
[ 3.519417] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6
[ 3.520878] ath9k 0000:06:00.0 wlan2: renamed from wlan0
[ 3.521719] asus_wmi: Number of fans: 1
[ 3.538923] systemd-udevd[447]: renamed network interface wlan0 to wlan2
[ 3.538942] cfg80211: World regulatory domain updated:
[ 3.538945] cfg80211: DFS Master region: unset
[ 3.538946] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3.538948] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.538950] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.538951] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.538953] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.538954] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.541116] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
[ 3.541170] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[ 3.542027] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 3.542029] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.542031] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.542032] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.542034] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
[ 3.542035] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.542036] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 3.542038] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 3.542039] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 3.543508] cfg80211: Current regulatory domain intersected:
[ 3.543509] cfg80211: DFS Master region: unset
[ 3.543510] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3.543512] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.543513] cfg80211: (2457000 KHz - 2482000 KHz @ 25000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.543513] cfg80211: (2474000 KHz - 2482000 KHz @ 8000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.543514] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.554988] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 3.555024] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 3.555054] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 3.555082] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 3.555122] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 3.555156] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 3.555189] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 3.555218] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 3.710532] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.832766] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.871309] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.367276] scsi 7:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 4.367704] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 4.534911] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 4.636636] init: failsafe main process (917) killed by TERM signal
[ 4.676718] audit: type=1400 audit(1475938615.596:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1003 comm="apparmor_parser"
[ 4.676722] audit: type=1400 audit(1475938615.596:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1003 comm="apparmor_parser"
[ 4.676929] audit: type=1400 audit(1475938615.596:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1003 comm="apparmor_parser"
[ 4.686091] Bluetooth: Core ver 2.21
[ 4.686100] NET: Registered protocol family 31
[ 4.686101] Bluetooth: HCI device and connection manager initialized
[ 4.686103] Bluetooth: HCI socket layer initialized
[ 4.686105] Bluetooth: L2CAP socket layer initialized
[ 4.686109] Bluetooth: SCO socket layer initialized
[ 4.694880] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.694883] Bluetooth: BNEP filters: protocol multicast
[ 4.694887] Bluetooth: BNEP socket layer initialized
[ 4.695114] Bluetooth: RFCOMM TTY layer initialized
[ 4.695117] Bluetooth: RFCOMM socket layer initialized
[ 4.695121] Bluetooth: RFCOMM ver 1.11
[ 4.710943] init: cups main process (1005) killed by HUP signal
[ 4.710951] init: cups main process ended, respawning
[ 4.752057] sd 7:0:0:0: [sde] Attached SCSI removable disk
[ 4.786628] init: samba-ad-dc main process (1025) terminated with status 1
[ 4.857215] r8169 0000:03:00.0 eth0: link down
[ 4.857216] r8169 0000:03:00.0 eth0: link down
[ 4.857267] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.944393] kvm: disabled by bios
[ 5.492723] init: plymouth-upstart-bridge main process ended, respawning
[ 5.495815] init: plymouth-upstart-bridge main process (1718) terminated with status 1
[ 5.495820] init: plymouth-upstart-bridge main process ended, respawning
[ 6.439425] r8169 0000:03:00.0 eth0: link up
[ 6.439433] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.804196] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 34.719598] audit_printk_skb: 162 callbacks suppressed
[ 34.719601] audit: type=1400 audit(1475931451.094:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3049 comm="apparmor_parser"
[ 34.719605] audit: type=1400 audit(1475931451.094:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3049 comm="apparmor_parser"
[ 34.719846] audit: type=1400 audit(1475931451.094:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3049 comm="apparmor_parser"
[ 55.643569] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 108.432148] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 161.108722] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 213.897271] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 266.629809] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 319.362422] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 372.090958] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 424.827549] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 477.556093] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 530.296688] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 582.973268] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 635.765834] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 688.490388] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 741.166960] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 793.955529] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 846.688091] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 899.420659] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 899.808631] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 952.153236] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1004.833755] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1057.614332] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1110.346889] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1163.083448] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1215.760064] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1268.544568] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1321.229194] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1321.613173] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1374.013720] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1426.746326] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1479.478897] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1532.207483] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1584.939988] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1637.620598] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1690.413162] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1743.141734] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1795.826316] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1848.554836] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1901.335379] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1901.671381] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 1954.016008] usb 3-6: reset high-speed USB device number 4 using xhci_hcd
[ 2006.804583] usb 3-6: reset high-speed USB device number 4 using xhci_hcd…toute façon ensuite ça répète toujours la même chose à intervalle régulier.
Pour les photos, ça va venir…
…ça me paraît pas catastrophique, un peu de poussière beurk, les contacteurs ont l'air de briller ( encore une fois je n'ai de souci qu'avec une carte sdHC nikon, pas de souci avec des cartes sd non-HC ).
Dernière modification par Coeur Noir (Le 08/10/2016, à 18:53)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#17 Le 08/10/2016, à 19:43
- moko138
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
À part le "3.6", c'est strictement pareil :
On situe la première occurrence de "device number 4"
[ 1.414959] usb 3-6: new high-speed USB device number 4 using xhci_hcdOn cherche de quel périph' il s'agit.
En cherchant en amont, on tombe tout de suite sur un usb branché en 3-5, donc ce n'est pas le même.
Alors on cherche plus tard :
les 4 lignes qui suivent ne concernent pas l'usb.
Et juste après voici : on retrouve le "idVendor=0bda, idProduct=0158,
sauf que là il contient une carte mémoire de 32 Go à une seule partition, sdd1 :
[ 2.004078] scsi 6:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 2.004413] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 2.005043] sd 6:0:0:0: [sdd] 62554112 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.006015] sd 6:0:0:0: [sdd] Write Protect is off
[ 2.006017] sd 6:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 2.006975] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2.006978] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2.011961] sdd: sdd1
[ 2.014652] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 2.034021] random: nonblocking pool is initialized
[ 2.057574] usb 3-6: New USB device found, idVendor=0bda, idProduct=0158
- -
...Quel distrait je suis ! Et toi aussi !
1) Nous avons le même lecteur de cartes !
2) Nous en avions parlé là ./viewtopic.php?pid=21456636#p21456636, où tu m'avais mis sur la voie de la solution qui - merci encore ! - me convient.
En février, je suppose que tu n'avais pas encore ta 16.04...
Et ici en #8, tu dis :
Je confirme que le « problème » persiste également sous 14.04 - toujours sur le device number 4…
Alors je peux te proposer de remplacer ta solution actuelle - à défaire d'abord - par la mienne : blacklister le module.
Pour lire les cartes, je connecte directement l'APN. Et comme dit plus haut, j'utilisais avant un lecteur externe.
Il y a aussi la possibilité - si ton lecteur lit tes cartes correctement, ce que tu as déjà démenti - de réinsérer à la volée le module mais juste le temps de lire ta carte, et de le retirer aussitôt après.
Le choix t'appartient !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#18 Le 08/10/2016, à 20:36
- Coeur Noir
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
Donc cette récurrence dans dmesg n'est pas vraiment normale. Mais est-elle gênante ?
Pour l'autre post, les symptômes ne sont pas les mêmes : ça concernait des messages « Assuming drive cache: write through » dans dmesg voire en console.
Il me semble que le problème s'est réglé chez moi avec le passage à la 14.04.
« si ton lecteur lit tes cartes correctement, ce que tu as déjà démenti » le seul dénominateur commun aux cartes qui posent problème, c'est qu'elles sont « HC » ( nikon ou autre, APN ou pas, si c'est écrit HC sur la carte je ne la trouve pas… )
Bon j'vais peut-être voir avec le module à charger, décharger. Ça doit pouvoir se « scripter » histoire que j'ai un truc graphique pour en quelque sorte allumer / éteindre le lecteur de cartes. Faudra que je branche mon récepteur souris ailleurs…
…et aussi quand même retester la manip' avec modprobe ums_realtek ss_en=0
Dernière modification par Coeur Noir (Le 08/10/2016, à 20:37)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#19 Le 08/10/2016, à 23:43
- moko138
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
les symptômes ne sont pas les mêmes
les symptômes ne sont pas les mêmes, mais le remède si :
tu blacklistes le module et tu n'entends plus parler du lecteur.
- -
Il me semble que le problème s'est réglé chez moi avec le passage à la 14.04.
J'ai un gros doute, parce que chez moi, le problème était le même dans 14.04 que dans 12.04. Jusqu'à ce que je blackliste le module.
- -
retester la manip' avec modprobe ums_realtek ss_en=0
Justement, de mémoire, ce n'est pas la bonne.
Mais teste, si tu veux : tu me diras.
- -
allumer / éteindre le lecteur de cartes
Y a-t-il plus simple que :
Charger manuellement un module :
sudo modprobe -a ums_realtek (option "-a" comme Ajouter, Append).
- -
Décharger manuellement un module :
sudo modprobe -r ums_realtek (option "-r" comme Retirer, Remove)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#20 Le 09/10/2016, à 17:49
- Coeur Noir
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
C'est que je ne suis pas seul à utiliser ce pc → donc passer des commandes à chaque fois que quelqu'un doit utiliser une carte mémoire, bof…
Cela dit, excuse moi de te solliciter encore, voici le dmesg du jour
- après avoir ajouté (hier) modprobe ums_realtek ss_en=0 à /etc/rc.local
- et après 4 ou 5 heures d'uptime
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-38-generic (buildd@lgw01-22) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #57~14.04.1-Ubuntu SMP Tue Sep 6 17:20:43 UTC 2016 (Ubuntu 4.4.0-38.57~14.04.1-generic 4.4.19)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-38-generic root=UUID=a7428baa-93fd-48e8-922d-637da9044d2f ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9795fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9796000-0x00000000b979cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b979d000-0x00000000b9be5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9be6000-0x00000000ba02cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba02d000-0x00000000cc66cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cc66d000-0x00000000cc874fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cc875000-0x00000000cc88afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cc88b000-0x00000000ccdcbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ccdcc000-0x00000000cdffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cdfff000-0x00000000cdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUS All Series/Z87-C, BIOS 1007 05/17/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 4 base 00CF000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 041FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 16GB, type WB
[ 0.000000] reg 1, base: 16GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 4, base: 3312MB, range: 16MB, type UC
[ 0.000000] reg 5, base: 16894MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 16110M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3312MB, range: 16MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 5, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 6, base: 16GB, range: 512MB, type WB
[ 0.000000] reg 7, base: 16894MB, range: 2MB, type UC
[ 0.000000] e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd890-0x000fd89f] mapped at [ffff8800000fd890]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[ 0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[ 0.000000] BRK [0x02206000, 0x02206fff] PGTABLE
[ 0.000000] BRK [0x02207000, 0x02207fff] PGTABLE
[ 0.000000] BRK [0x02208000, 0x02208fff] PGTABLE
[ 0.000000] BRK [0x02209000, 0x02209fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3416a000-0x360acfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CC879078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CC885B28 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CC879180 00C9A1 (v02 ALASKA A M I 00000024 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000CCDCA080 000040
[ 0.000000] ACPI: APIC 0x00000000CC885C38 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CC885CD0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CC885D18 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000CC886258 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000CC886D30 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CC886D70 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CC886DA8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000CC887118 00329E (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41fdf6000-0x41fdfafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b9795fff]
[ 0.000000] node 0: [mem 0x00000000b979d000-0x00000000b9be5fff]
[ 0.000000] node 0: [mem 0x00000000ba02d000-0x00000000cc66cfff]
[ 0.000000] node 0: [mem 0x00000000cdfff000-0x00000000cdffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
[ 0.000000] On node 0 totalpages: 4112316
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13001 pages used for memmap
[ 0.000000] DMA32 zone: 832032 pages, LIFO batch:31
[ 0.000000] Normal zone: 51192 pages used for memmap
[ 0.000000] Normal zone: 3276288 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcf200000-0xdf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9796000-0xb979cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9be6000-0xba02cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc66d000-0xcc874fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc875000-0xcc88afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc88b000-0xccdcbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xccdcc000-0xcdffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce000000-0xceffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88041fa00000 s98008 r8192 d28968 u262144
[ 0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4048038
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-38-generic root=UUID=a7428baa-93fd-48e8-922d-637da9044d2f ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16073248K/16449264K available (8187K kernel code, 1292K rwdata, 3960K rodata, 1484K init, 1292K bss, 376016K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:488 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3497.922 MHz processor
[ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6995.84 BogoMIPS (lpj=13991688)
[ 0.000022] pid_max: default: 32768 minimum: 301
[ 0.000026] ACPI: Core revision 20150930
[ 0.006548] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.006561] Security Framework initialized
[ 0.006562] Yama: becoming mindful.
[ 0.006573] AppArmor: AppArmor initialized
[ 0.007214] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.009372] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010325] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.010337] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.010532] Initializing cgroup subsys io
[ 0.010535] Initializing cgroup subsys memory
[ 0.010539] Initializing cgroup subsys devices
[ 0.010541] Initializing cgroup subsys freezer
[ 0.010543] Initializing cgroup subsys net_cls
[ 0.010544] Initializing cgroup subsys perf_event
[ 0.010546] Initializing cgroup subsys net_prio
[ 0.010548] Initializing cgroup subsys hugetlb
[ 0.010549] Initializing cgroup subsys pids
[ 0.010565] CPU: Physical Processor ID: 0
[ 0.010565] CPU: Processor Core ID: 0
[ 0.010568] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.010569] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.011291] mce: CPU supports 9 MCE banks
[ 0.011301] CPU0: Thermal monitoring enabled (TM1)
[ 0.011308] process: using mwait in idle threads
[ 0.011311] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.011311] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.011550] Freeing SMP alternatives memory: 28K (ffffffff820b8000 - ffffffff820bf000)
[ 0.023522] ftrace: allocating 32041 entries in 126 pages
[ 0.032817] smpboot: Max logical packages: 2
[ 0.032818] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.033178] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072863] TSC deadline timer enabled
[ 0.072865] smpboot: CPU0: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.072877] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.072890] ... version: 3
[ 0.072891] ... bit width: 48
[ 0.072891] ... generic registers: 4
[ 0.072892] ... value mask: 0000ffffffffffff
[ 0.072892] ... max period: 0000ffffffffffff
[ 0.072893] ... fixed-purpose events: 3
[ 0.072894] ... event mask: 000000070000000f
[ 0.073468] x86: Booting SMP configuration:
[ 0.073469] .... node #0, CPUs: #1
[ 0.076626] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.076674] #2 #3 #4 #5 #6 #7
[ 0.095438] x86: Booted up 1 node, 8 CPUs
[ 0.095441] smpboot: Total of 8 processors activated (55966.75 BogoMIPS)
[ 0.102072] devtmpfs: initialized
[ 0.104065] evm: security.selinux
[ 0.104066] evm: security.SMACK64
[ 0.104067] evm: security.SMACK64EXEC
[ 0.104067] evm: security.SMACK64TRANSMUTE
[ 0.104068] evm: security.SMACK64MMAP
[ 0.104068] evm: security.ima
[ 0.104069] evm: security.capability
[ 0.104109] PM: Registering ACPI NVS region [mem 0xb9796000-0xb979cfff] (28672 bytes)
[ 0.104110] PM: Registering ACPI NVS region [mem 0xcc88b000-0xccdcbfff] (5509120 bytes)
[ 0.104208] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.104267] pinctrl core: initialized pinctrl subsystem
[ 0.104344] RTC time: 10:39:51, date: 10/09/16
[ 0.104422] NET: Registered protocol family 16
[ 0.113978] cpuidle: using governor ladder
[ 0.125967] cpuidle: using governor menu
[ 0.125969] PCCT header not found.
[ 0.126020] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.126021] ACPI: bus type PCI registered
[ 0.126022] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.126072] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.126074] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.126081] PCI: Using configuration type 1 for base access
[ 0.126104] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.138208] ACPI: Added _OSI(Module Device)
[ 0.138209] ACPI: Added _OSI(Processor Device)
[ 0.138210] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.138211] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.140363] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.141877] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.142153] ACPI: Dynamic OEM Table Load:
[ 0.142157] ACPI: SSDT 0xFFFF88040D019400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.142550] ACPI: Dynamic OEM Table Load:
[ 0.142553] ACPI: SSDT 0xFFFF88040D471800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.142968] ACPI: Dynamic OEM Table Load:
[ 0.142970] ACPI: SSDT 0xFFFF88040D009800 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.143966] ACPI : EC: EC started
[ 0.143975] ACPI: Interpreter enabled
[ 0.143979] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.143982] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.143992] ACPI: (supports S0 S3 S4 S5)
[ 0.143993] ACPI: Using IOAPIC for interrupt routing
[ 0.144007] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.148999] ACPI: Power Resource [FN00] (off)
[ 0.149044] ACPI: Power Resource [FN01] (off)
[ 0.149089] ACPI: Power Resource [FN02] (off)
[ 0.149131] ACPI: Power Resource [FN03] (off)
[ 0.149173] ACPI: Power Resource [FN04] (off)
[ 0.149666] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.149669] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.149786] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.149859] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.149860] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.150096] PCI host bridge to bus 0000:00
[ 0.150098] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.150099] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.150101] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.150101] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.150102] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.150103] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.150104] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.150105] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.150106] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.150107] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.150108] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.150112] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.150169] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.150193] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.150250] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.150276] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.150285] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.150289] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.150292] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.150342] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.150350] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit]
[ 0.150416] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.150437] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[ 0.150478] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.150503] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.150526] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.150548] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1e000-0xf7e1e00f 64bit]
[ 0.150592] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.150644] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.150667] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c3ff]
[ 0.150727] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.150761] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.150785] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.150805] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
[ 0.150853] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.150880] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.150903] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.150954] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.150999] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.151023] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.151074] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.151118] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.151141] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[ 0.151192] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.151236] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.151260] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 0.151311] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.151354] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.151379] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.151403] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff]
[ 0.151463] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.151497] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.151522] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
[ 0.151649] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.151666] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.151671] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.151677] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.151682] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.151688] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.151693] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff]
[ 0.151714] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.151757] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.151770] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit]
[ 0.151786] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.151859] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.151902] acpiphp: Slot [1] registered
[ 0.151905] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.151959] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.151995] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.152021] pci 0000:03:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit]
[ 0.152037] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.152102] pci 0000:03:00.0: supports D1 D2
[ 0.152103] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.152137] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.157992] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.157995] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.157997] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.158001] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.158045] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[ 0.158134] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.158152] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
[ 0.158159] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.158160] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.158161] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.158162] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.158163] pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.158164] pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.158165] pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.158165] pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.158166] pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.158167] pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.158254] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.158271] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.158271] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.158272] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.158273] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.158274] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.158275] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.158276] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.158277] pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.158278] pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.158279] pci 0000:04:00.0: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.158337] pci 0000:06:00.0: [168c:002e] type 00 class 0x028000
[ 0.158374] pci 0000:06:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 0.158472] pci 0000:06:00.0: supports D1
[ 0.158473] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[ 0.158505] pci 0000:06:00.0: System wakeup disabled by ACPI
[ 0.165995] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.165999] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.166491] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.166519] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.166548] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.166575] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.166601] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.166627] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.166654] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.166680] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.166895] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.166914] ACPI : EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
[ 0.166980] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.166981] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.166983] vgaarb: loaded
[ 0.166983] vgaarb: bridge control possible 0000:00:02.0
[ 0.167120] SCSI subsystem initialized
[ 0.167140] libata version 3.00 loaded.
[ 0.167154] ACPI: bus type USB registered
[ 0.167162] usbcore: registered new interface driver usbfs
[ 0.167167] usbcore: registered new interface driver hub
[ 0.167180] usbcore: registered new device driver usb
[ 0.167262] PCI: Using ACPI for IRQ routing
[ 0.168397] PCI: pci_cache_line_size set to 64 bytes
[ 0.168433] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.168433] e820: reserve RAM buffer [mem 0xb9796000-0xbbffffff]
[ 0.168434] e820: reserve RAM buffer [mem 0xb9be6000-0xbbffffff]
[ 0.168435] e820: reserve RAM buffer [mem 0xcc66d000-0xcfffffff]
[ 0.168436] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[ 0.168437] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[ 0.168508] NetLabel: Initializing
[ 0.168508] NetLabel: domain hash size = 128
[ 0.168509] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.168516] NetLabel: unlabeled traffic allowed by default
[ 0.168553] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.168556] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.170566] amd_nb: Cannot enumerate AMD northbridges
[ 0.170576] clocksource: Switched to clocksource hpet
[ 0.174208] AppArmor: AppArmor Filesystem Enabled
[ 0.174239] pnp: PnP ACPI init
[ 0.174283] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.174285] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.174378] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.174380] system 00:01: [io 0xffff] has been reserved
[ 0.174381] system 00:01: [io 0xffff] has been reserved
[ 0.174382] system 00:01: [io 0xffff] has been reserved
[ 0.174383] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.174384] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.174384] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.174385] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.174386] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.174387] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.174389] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.174402] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.174429] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.174431] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.174479] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.174481] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.174508] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.174509] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.174649] pnp 00:06: [dma 0 disabled]
[ 0.174677] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.174700] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.174943] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.174944] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.174945] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.174946] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.174947] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.174948] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.174949] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.174950] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.174951] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.174952] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.174953] system 00:08: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.174954] system 00:08: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.174956] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.175103] pnp: PnP ACPI: found 9 devices
[ 0.180701] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.180737] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.180742] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.180749] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.180751] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.180754] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.180757] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.180761] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.180776] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[ 0.180783] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.180787] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.180793] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.180794] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.180795] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.180795] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.180796] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.180797] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.180798] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.180799] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.180800] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.180801] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.180802] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.180803] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.180804] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.180805] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.180806] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.180807] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.180807] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.180808] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.180809] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.180810] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.180811] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.180812] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.180813] pci_bus 0000:04: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.180814] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.180815] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.180815] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.180816] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.180817] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.180818] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.180819] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.180820] pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.180821] pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.180822] pci_bus 0000:05: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.180823] pci_bus 0000:06: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.180843] NET: Registered protocol family 2
[ 0.180951] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.181083] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.181195] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.181214] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.181248] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.181306] NET: Registered protocol family 1
[ 0.181315] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.181573] PCI: CLS 64 bytes, default 64
[ 0.181603] Trying to unpack rootfs image as initramfs...
[ 0.493497] Freeing initrd memory: 32012K (ffff88003416a000 - ffff8800360ad000)
[ 0.493505] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.493507] software IO TLB [mem 0xc866d000-0xcc66d000] (64MB) mapped at [ffff8800c866d000-ffff8800cc66cfff]
[ 0.493559] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.493560] hw unit of domain pp0-core 2^-14 Joules
[ 0.493560] hw unit of domain package 2^-14 Joules
[ 0.493561] hw unit of domain dram 2^-14 Joules
[ 0.493561] hw unit of domain pp1-gpu 2^-14 Joules
[ 0.493689] Scanning for low memory corruption every 60 seconds
[ 0.493917] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.493947] audit: initializing netlink subsys (disabled)
[ 0.493957] audit: type=2000 audit(1476009591.480:1): initialized
[ 0.494240] Initialise system trusted keyring
[ 0.494328] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.494329] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.495173] zbud: loaded
[ 0.495298] VFS: Disk quotas dquot_6.6.0
[ 0.495318] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.495467] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.495604] fuse init (API version 7.23)
[ 0.495681] Key type big_key registered
[ 0.495692] Allocating IMA MOK and blacklist keyrings.
[ 0.495943] Key type asymmetric registered
[ 0.495945] Asymmetric key parser 'x509' registered
[ 0.495966] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.495993] io scheduler noop registered
[ 0.495995] io scheduler deadline registered (default)
[ 0.496013] io scheduler cfq registered
[ 0.496359] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.496363] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.496380] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.496380] vesafb: scrolling: redraw
[ 0.496381] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.496389] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90002000000, using 8128k, total 8128k
[ 0.496448] Console: switching to colour frame buffer device 240x67
[ 0.496462] fb0: VESA VGA frame buffer device
[ 0.496471] intel_idle: MWAIT substates: 0x42120
[ 0.496471] intel_idle: v0.4.1 model 0x3C
[ 0.496472] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.496695] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.496697] ACPI: Power Button [PWRB]
[ 0.496718] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.496720] ACPI: Power Button [PWRF]
[ 0.497173] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.497174] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.497306] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.497307] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.497331] GHES: HEST is not enabled!
[ 0.497392] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.517749] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.518673] Linux agpgart interface v0.103
[ 0.520628] brd: module loaded
[ 0.521450] loop: module loaded
[ 0.521580] libphy: Fixed MDIO Bus: probed
[ 0.521583] tun: Universal TUN/TAP device driver, 1.6
[ 0.521584] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.521607] PPP generic driver version 2.4.2
[ 0.521642] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.521645] ehci-pci: EHCI PCI platform driver
[ 0.521707] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.521710] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.521719] ehci-pci 0000:00:1a.0: debug port 2
[ 0.525606] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.525613] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7e1c000
[ 0.534592] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.534613] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.534614] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.534615] usb usb1: Product: EHCI Host Controller
[ 0.534616] usb usb1: Manufacturer: Linux 4.4.0-38-generic ehci_hcd
[ 0.534617] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.534682] hub 1-0:1.0: USB hub found
[ 0.534685] hub 1-0:1.0: 2 ports detected
[ 0.534802] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.534805] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.534813] ehci-pci 0000:00:1d.0: debug port 2
[ 0.538698] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.538703] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000
[ 0.550620] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.550636] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.550637] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.550638] usb usb2: Product: EHCI Host Controller
[ 0.550639] usb usb2: Manufacturer: Linux 4.4.0-38-generic ehci_hcd
[ 0.550640] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.550695] hub 2-0:1.0: USB hub found
[ 0.550697] hub 2-0:1.0: 2 ports detected
[ 0.550763] ehci-platform: EHCI generic platform driver
[ 0.550770] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.550773] ohci-pci: OHCI PCI platform driver
[ 0.550779] ohci-platform: OHCI generic platform driver
[ 0.550785] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.550845] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.550848] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.551905] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.551908] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.551954] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.551955] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.551956] usb usb3: Product: xHCI Host Controller
[ 0.551957] usb usb3: Manufacturer: Linux 4.4.0-38-generic xhci-hcd
[ 0.551957] usb usb3: SerialNumber: 0000:00:14.0
[ 0.552015] hub 3-0:1.0: USB hub found
[ 0.552025] hub 3-0:1.0: 14 ports detected
[ 0.553404] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.553406] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.553421] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.553422] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.553423] usb usb4: Product: xHCI Host Controller
[ 0.553424] usb usb4: Manufacturer: Linux 4.4.0-38-generic xhci-hcd
[ 0.553425] usb usb4: SerialNumber: 0000:00:14.0
[ 0.553480] hub 4-0:1.0: USB hub found
[ 0.553486] hub 4-0:1.0: 6 ports detected
[ 0.554121] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.554122] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.554749] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.554808] mousedev: PS/2 mouse device common for all mice
[ 0.554886] rtc_cmos 00:02: RTC can wake from S4
[ 0.554984] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.555003] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.555008] i2c /dev entries driver
[ 0.555036] device-mapper: uevent: version 1.0.3
[ 0.555075] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.555088] Intel P-state driver initializing.
[ 0.555281] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.556096] NET: Registered protocol family 10
[ 0.556508] NET: Registered protocol family 17
[ 0.556550] Key type dns_resolver registered
[ 0.557204] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
[ 0.557249] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
[ 0.557273] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
[ 0.557308] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
[ 0.557338] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x9
[ 0.557381] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x9
[ 0.557395] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x9
[ 0.557422] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x9
[ 0.557521] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.557980] registered taskstats version 1
[ 0.558024] Loading compiled-in X.509 certificates
[ 0.560245] Loaded X.509 cert 'Build time autogenerated kernel key: 777c07dab68ea2292bef256283d37f42a58bcbe2'
[ 0.560299] zswap: loaded using pool lzo/zbud
[ 0.563297] Key type trusted registered
[ 0.566092] Key type encrypted registered
[ 0.566096] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.566109] ima: No TPM chip found, activating TPM-bypass!
[ 0.566135] evm: HMAC attrs: 0x1
[ 0.566470] Magic number: 4:891:678
[ 0.566600] rtc_cmos 00:02: setting system clock to 2016-10-09 10:39:51 UTC (1476009591)
[ 0.566708] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.566709] EDD information not available.
[ 0.566757] PM: Hibernation image not present or could not be loaded.
[ 0.567324] Freeing unused kernel memory: 1484K (ffffffff81f45000 - ffffffff820b8000)
[ 0.567325] Write protecting the kernel read-only data: 14336k
[ 0.567663] Freeing unused kernel memory: 2040K (ffff880001802000 - ffff880001a00000)
[ 0.567919] Freeing unused kernel memory: 136K (ffff880001dde000 - ffff880001e00000)
[ 0.575378] systemd-udevd[154]: starting version 204
[ 0.576445] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.582112] wmi: Mapper loaded
[ 0.582234] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.588994] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.589002] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.589842] ahci 0000:00:1f.2: version 3.0
[ 0.589993] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x35 impl SATA mode
[ 0.589995] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.590540] [drm] Initialized drm 1.1.0 20060810
[ 0.595525] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc900018b8000, 74:d0:2b:9e:fb:40, XID 0c000800 IRQ 27
[ 0.595528] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.611028] scsi host0: ahci
[ 0.611111] scsi host1: ahci
[ 0.611169] scsi host2: ahci
[ 0.611222] scsi host3: ahci
[ 0.611275] scsi host4: ahci
[ 0.611329] scsi host5: ahci
[ 0.611355] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 26
[ 0.611356] ata2: DUMMY
[ 0.611357] ata3: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a200 irq 26
[ 0.611358] ata4: DUMMY
[ 0.611359] ata5: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a300 irq 26
[ 0.611361] ata6: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a380 irq 26
[ 0.611735] [drm] Memory usable by graphics device = 2048M
[ 0.611737] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 0.611738] fb: switching to inteldrmfb from VESA VGA
[ 0.611755] Console: switching to colour dummy device 80x25
[ 0.611795] [drm] Replacing VGA console driver
[ 0.617924] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.617925] [drm] Driver supports precise vblank timestamp query.
[ 0.618260] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.846622] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.862640] usb 3-5: new full-speed USB device number 2 using xhci_hcd
[ 0.862647] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.888562] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.888850] acpi device:62: registered as cooling_device13
[ 0.888902] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.888975] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 0.934606] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.934622] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.934636] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.934650] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.934736] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.934740] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff88040f4e0618), AE_NOT_FOUND (20150930/psparse-542)
[ 0.934806] ata5.00: READ LOG DMA EXT failed, trying unqueued
[ 0.934825] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.934826] ata5.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB0Q, max UDMA/133
[ 0.934828] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.934960] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.934962] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff88040f4e0618), AE_NOT_FOUND (20150930/psparse-542)
[ 0.935017] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.935019] ata5.00: configured for UDMA/133
[ 0.935049] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.935052] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff88040f4e0690), AE_NOT_FOUND (20150930/psparse-542)
[ 0.935194] ata6.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[ 0.935196] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.935344] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.935347] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88040f4e0528), AE_NOT_FOUND (20150930/psparse-542)
[ 0.935615] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.935617] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff88040f4e0690), AE_NOT_FOUND (20150930/psparse-542)
[ 0.935623] ata3.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3MA, max UDMA/133
[ 0.935625] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.935750] ata6.00: configured for UDMA/133
[ 0.936251] ata1.00: ATAPI: ATAPI iHAS124 Y, BL0V, max UDMA/100
[ 0.936472] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.936474] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88040f4e0528), AE_NOT_FOUND (20150930/psparse-542)
[ 0.936749] ata3.00: configured for UDMA/133
[ 0.938152] ata1.00: configured for UDMA/100
[ 0.939957] scsi 0:0:0:0: CD-ROM ATAPI iHAS124 Y BL0V PQ: 0 ANSI: 5
[ 0.956208] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.956210] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.956306] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.956363] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.956651] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72101 A3MA PQ: 0 ANSI: 5
[ 0.956798] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 0.956802] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 0.956884] sd 2:0:0:0: [sda] Write Protect is off
[ 0.956886] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.956904] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.956911] scsi 4:0:0:0: Direct-Access ATA Samsung SSD 840 BB0Q PQ: 0 ANSI: 5
[ 0.957006] sd 4:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 0.957023] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 0.957025] sd 4:0:0:0: [sdb] Write Protect is off
[ 0.957026] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.957032] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.957163] scsi 5:0:0:0: Direct-Access ATA WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[ 0.957240] sdb: sdb1 sdb2 sdb3
[ 0.957258] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 0.957259] sd 5:0:0:0: [sdc] 4096-byte physical blocks
[ 0.957287] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 0.957309] sd 5:0:0:0: [sdc] Write Protect is off
[ 0.957311] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 0.957332] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.957439] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 0.965177] sda: sda1 sda2
[ 0.965373] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.982957] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 0.982960] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.983222] hub 1-1:1.0: USB hub found
[ 0.983283] hub 1-1:1.0: 6 ports detected
[ 0.992794] usb 3-5: New USB device found, idVendor=046d, idProduct=c52f
[ 0.992796] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.992798] usb 3-5: Product: USB Receiver
[ 0.992799] usb 3-5: Manufacturer: Logitech
[ 0.995464] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.998208] usbcore: registered new interface driver usbhid
[ 0.998209] usbhid: USB HID core driver
[ 0.999113] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:046D:C52F.0001/input/input4
[ 0.999196] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-5/input0
[ 0.999408] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 0.999410] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.999548] hub 2-1:1.0: USB hub found
[ 0.999657] hub 2-1:1.0: 8 ports detected
[ 0.999820] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:046D:C52F.0002/input/input5
[ 1.009502] sdc: sdc1 sdc2 < sdc5 >
[ 1.009798] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 1.054715] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-5/input1
[ 1.070756] fbcon: inteldrmfb (fb0) is primary device
[ 1.070804] Console: switching to colour frame buffer device 240x67
[ 1.070820] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.162628] usb 3-6: new high-speed USB device number 3 using xhci_hcd
[ 1.490629] tsc: Refined TSC clocksource calibration: 3497.972 MHz
[ 1.490631] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x326bd592a83, max_idle_ns: 440795311901 ns
[ 1.797661] usb 3-6: New USB device found, idVendor=0bda, idProduct=0158
[ 1.797664] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.797666] usb 3-6: Product: USB2.0-CRW
[ 1.797667] usb 3-6: Manufacturer: Generic
[ 1.797684] usb 3-6: SerialNumber: 20060413092100000
[ 1.801300] usbcore: registered new interface driver usb-storage
[ 1.802109] usbcore: registered new interface driver uas
[ 1.802860] ums-realtek 3-6:1.0: USB Mass Storage device detected
[ 1.809065] scsi host6: usb-storage 3-6:1.0
[ 1.809107] usbcore: registered new interface driver ums-realtek
[ 1.965847] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.236910] random: init: uninitialized urandom read (12 bytes read, 118 bits of entropy available)
[ 2.490702] clocksource: Switched to clocksource tsc
[ 2.565724] random: nonblocking pool is initialized
[ 2.819009] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 2.819223] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 2.986749] usb 3-6: reset high-speed USB device number 3 using xhci_hcd
[ 3.200028] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 3.776086] Adding 760828k swap on /dev/sdc5. Priority:-1 extents:1 across:760828k FS
[ 3.802274] systemd-udevd[429]: starting version 204
[ 3.822589] lp: driver loaded but no devices found
[ 3.823997] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.832305] ppdev: user-space parallel port driver
[ 3.864906] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.878548] audit: type=1400 audit(1476009594.804:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=533 comm="apparmor_parser"
[ 3.878553] audit: type=1400 audit(1476009594.804:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=533 comm="apparmor_parser"
[ 3.878555] audit: type=1400 audit(1476009594.804:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=533 comm="apparmor_parser"
[ 3.878793] audit: type=1400 audit(1476009594.808:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=533 comm="apparmor_parser"
[ 3.878797] audit: type=1400 audit(1476009594.808:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=533 comm="apparmor_parser"
[ 3.878922] audit: type=1400 audit(1476009594.808:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=533 comm="apparmor_parser"
[ 3.881929] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 3.881932] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.881934] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.881935] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.881937] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
[ 3.881938] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.881940] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 3.881942] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 3.881943] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 3.889772] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
[ 3.889809] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
[ 3.896871] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 3.897541] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 3.897603] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 3.897662] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 3.897726] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 3.897782] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 3.897838] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 3.897891] AVX2 version of gcm_enc/dec engaged.
[ 3.897892] AES CTR mode by8 optimization enabled
[ 3.897899] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 3.945356] asus_wmi: ASUS WMI generic driver loaded
[ 3.947174] asus_wmi: Initialization: 0x0
[ 3.947196] asus_wmi: BIOS WMI version: 0.9
[ 3.947228] asus_wmi: SFUN value: 0x0
[ 3.947528] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input16
[ 3.947607] asus_wmi: Number of fans: 1
[ 3.957633] kvm: disabled by bios
[ 3.960164] ath: EEPROM regdomain: 0x809c
[ 3.960166] ath: EEPROM indicates we should expect a country code
[ 3.960167] ath: doing EEPROM country->regdmn map search
[ 3.960168] ath: country maps to regdmn code: 0x52
[ 3.960169] ath: Country alpha2 being used: CN
[ 3.960170] ath: Regpair used: 0x52
[ 3.963727] intel_rapl: Found RAPL domain package
[ 3.963730] intel_rapl: Found RAPL domain core
[ 3.963732] intel_rapl: Found RAPL domain uncore
[ 3.963734] intel_rapl: Found RAPL domain dram
[ 3.968037] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 3.968336] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90001d00000, irq=18
[ 3.977526] ath9k 0000:06:00.0 wlan2: renamed from wlan0
[ 3.994747] systemd-udevd[459]: renamed network interface wlan0 to wlan2
[ 3.994764] cfg80211: World regulatory domain updated:
[ 3.994766] cfg80211: DFS Master region: unset
[ 3.994767] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3.994769] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.994771] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.994773] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.994774] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.994776] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.999984] cfg80211: Regulatory domain changed to country: CN
[ 3.999986] cfg80211: DFS Master region: unset
[ 3.999987] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3.999988] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.999989] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 3.999990] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 3.999991] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[ 3.999991] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 4.001908] cfg80211: Regulatory domain changed to country: FR
[ 4.001909] cfg80211: DFS Master region: unset
[ 4.001910] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.001911] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.001912] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.001913] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 4.001914] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 4.001914] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 4.024723] kvm: disabled by bios
[ 4.378872] EXT4-fs (sdb1): re-mounted. Opts: discard,errors=remount-ro
[ 4.574179] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.713224] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.742432] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.351410] init: failsafe main process (872) killed by TERM signal
[ 5.401607] Bluetooth: Core ver 2.21
[ 5.401718] NET: Registered protocol family 31
[ 5.401719] Bluetooth: HCI device and connection manager initialized
[ 5.401722] Bluetooth: HCI socket layer initialized
[ 5.401723] Bluetooth: L2CAP socket layer initialized
[ 5.401727] Bluetooth: SCO socket layer initialized
[ 5.408386] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.408389] Bluetooth: BNEP filters: protocol multicast
[ 5.408393] Bluetooth: BNEP socket layer initialized
[ 5.415478] Bluetooth: RFCOMM TTY layer initialized
[ 5.415484] Bluetooth: RFCOMM socket layer initialized
[ 5.415487] Bluetooth: RFCOMM ver 1.11
[ 5.418435] audit: type=1400 audit(1476009596.344:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=980 comm="apparmor_parser"
[ 5.418442] audit: type=1400 audit(1476009596.344:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=980 comm="apparmor_parser"
[ 5.418795] audit: type=1400 audit(1476009596.348:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=980 comm="apparmor_parser"
[ 5.437641] init: cups main process (982) killed by HUP signal
[ 5.437647] init: cups main process ended, respawning
[ 5.493774] init: samba-ad-dc main process (951) terminated with status 1
[ 5.502683] audit_printk_skb: 120 callbacks suppressed
[ 5.502685] audit: type=1400 audit(1476009596.432:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=1057 comm="apparmor_parser"
[ 5.502689] audit: type=1400 audit(1476009596.432:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=1057 comm="apparmor_parser"
[ 5.526674] audit: type=1400 audit(1476009596.456:53): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=1057 comm="apparmor_parser"
[ 5.527303] audit: type=1400 audit(1476009596.456:54): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer" pid=1057 comm="apparmor_parser"
[ 5.542708] audit: type=1400 audit(1476009596.472:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=1057 comm="apparmor_parser"
[ 5.542711] audit: type=1400 audit(1476009596.472:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=1057 comm="apparmor_parser"
[ 5.581173] r8169 0000:03:00.0 eth0: link down
[ 5.581174] r8169 0000:03:00.0 eth0: link down
[ 5.581215] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.586699] audit: type=1400 audit(1476009596.516:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=1057 comm="apparmor_parser"
[ 5.587583] audit: type=1400 audit(1476009596.516:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=1057 comm="apparmor_parser"
[ 5.587585] audit: type=1400 audit(1476009596.516:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=1057 comm="apparmor_parser"
[ 5.598700] audit: type=1400 audit(1476009596.528:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=1057 comm="apparmor_parser"
[ 5.670481] kvm: disabled by bios
[ 6.056934] usbcore: deregistering interface driver ums-realtek
[ 6.371366] init: plymouth-upstart-bridge main process ended, respawning
[ 6.376602] init: plymouth-upstart-bridge main process (1666) terminated with status 1
[ 6.376609] init: plymouth-upstart-bridge main process ended, respawning
[ 6.740725] ums-realtek 3-6:1.0: USB Mass Storage device detected
[ 6.899930] scsi host7: usb-storage 3-6:1.0
[ 6.900022] usbcore: registered new interface driver ums-realtek
[ 6.919244] init: plymouth-stop pre-start process (1780) terminated with status 1
[ 7.146062] r8169 0000:03:00.0 eth0: link up
[ 7.146071] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7.903815] scsi 7:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 7.904135] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 7.905814] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[ 35.454394] audit_printk_skb: 12 callbacks suppressed
[ 35.454396] audit: type=1400 audit(1476009626.393:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2876 comm="apparmor_parser"
[ 35.454400] audit: type=1400 audit(1476009626.393:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2876 comm="apparmor_parser"
[ 35.454700] audit: type=1400 audit(1476009626.393:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2876 comm="apparmor_parser"
[ 3694.066631] usb 3-6: reset high-speed USB device number 3 using xhci_hcd
[ 6211.704822] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 6211.710080] JFS: nTxBlock = 8192, nTxLock = 65536
[ 6211.717014] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 6211.725018] QNX4 filesystem 0.2.3 registered.
[ 6211.794585] raid6: sse2x1 gen() 12121 MB/s
[ 6211.862582] raid6: sse2x1 xor() 9590 MB/s
[ 6211.930583] raid6: sse2x2 gen() 15391 MB/s
[ 6211.998571] raid6: sse2x2 xor() 10502 MB/s
[ 6212.066572] raid6: sse2x4 gen() 17899 MB/s
[ 6212.134572] raid6: sse2x4 xor() 12578 MB/s
[ 6212.202573] raid6: avx2x1 gen() 23916 MB/s
[ 6212.270574] raid6: avx2x2 gen() 27651 MB/s
[ 6212.338576] raid6: avx2x4 gen() 31409 MB/s
[ 6212.338578] raid6: using algorithm avx2x4 gen() 31409 MB/s
[ 6212.338579] raid6: using avx2x2 recovery algorithm
[ 6212.339820] xor: automatically using best checksumming function:
[ 6212.378578] avx : 38223.000 MB/sec
[ 6212.389850] Btrfs loaded
[ 6762.526653] usb 3-6: reset high-speed USB device number 3 using xhci_hcd
[ 7559.722137] usb 3-6: reset high-speed USB device number 3 using xhci_hcd
[ 7814.189749] usb 3-6: reset high-speed USB device number 3 using xhci_hcd
[ 9297.475062] usb 3-6: reset high-speed USB device number 3 using xhci_hcd
[10475.604013] usb 3-6: reset high-speed USB device number 3 using xhci_hcd
[11147.869713] usb 3-6: reset high-speed USB device number 3 using xhci_hcd
[14267.530512] usb 3-6: reset high-speed USB device number 3 using xhci_hcd
[14933.652095] usb 3-6: reset high-speed USB device number 3 using xhci_hcd
[14956.692466] usb 3-6: reset high-speed USB device number 3 using xhci_hcddéjà il n'y a pas plus de 1000 lignes comme les fois précédentes mais toujours des messages ( moins ) concernant usb 3-6 device number …3 et plus 4.
À quoi correspondent les lignes raid6, me semble pas les avoir vues précédemment ?
Dernière modification par Coeur Noir (Le 09/10/2016, à 17:51)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#21 Le 09/10/2016, à 19:04
- moko138
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
À la fin, les "reset" sont espacés d'un quart d'heure, donc c'est devenu négligeable.
Bravo !
Et en effet, à défaut de lecteur externe, ta solution convient mieux que la mienne pour un système multi-utilisateur.
Tu devrais mettre ici ton /etc/rc.local, pour servir à d'autres !
- -
Je n'ai pas compris ton "…3 et plus 4".
- -
Je découvre la photo que tu as ajoutée hier (fin du #16) :
il reste pas mal de poussière...
- -
"raid6" :
je n'ai pas d'explication.
Je remarque que, juste avant et juste après, ton système charge les modules ntfs et btrfs, alors qu'aucun périphérique ne vient d'être branché.
Le système ferait-il un auto-test ?
Tu peux chercher dans auth.log si ça correspond à une utilisation de fdisk, parted, gparted ou autres.
De toute façon, ça n'intervient qu'au bout de 1h44', alors ça ne gêne pas...
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#22 Le 09/10/2016, à 19:16
- Coeur Noir
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
Contenu de /etc/rc.local
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
# messages dans dmesg autour de multi-card-reader realtek
# https://bugs.launchpad.net/ubuntu/+source/linux/+bug/925760
rmmod ums_realtek
modprobe ums_realtek ss_en=0
exit 0Dans auth.log je trouve synaptic et des apt-get.
J'ai aussi utilisé ncdu et baobab aujourd'hui, ça pourrait coïncider niveau timing…
Je n'ai pas compris ton "…3 et plus 4" → bah hier j'avais du
usb 3-6: reset high-speed USB device number 4 using xhci_hcdà répétition, aujourd'hui c'est
usb 3-6: reset high-speed USB device number 3 using xhci_hcdà intervalle bien plus espacé.
Dernière modification par Coeur Noir (Le 09/10/2016, à 19:20)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#23 Le 09/10/2016, à 19:29
- moko138
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
"…3 et plus 4" : D'aaaccord !
J'ai si rarement besoin de savoir comment le système numérote les périph' usb, que je ne le mémorise pas.
En gros les chiffres dépendent :
du hub interne utilisé
du numéro de la prise sur ce hub
de la chronologie de branchement des périphériques.
On arrive à reconstituer les règles en croisant le retour de lsusb avec celui de sudo lshw.
- -
Merci pour /etc/rc.local !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#24 Le 09/10/2016, à 21:09
- MicP
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
L'option t de lsusb donne aussi pas mal d'informations :
michel@debg53sw:~$ lsusb -t
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 5000M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
|__ Port 1: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 2: Dev 4, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 5, If 0, Class=Vendor Specific Class, Driver=dvb_usb_rtl28xxu, 480M
|__ Port 1: Dev 5, If 1, Class=Vendor Specific Class, Driver=, 480M
|__ Port 2: Dev 6, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 2: Dev 6, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 3: Dev 7, If 0, Class=Hub, Driver=hub/4p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
|__ Port 2: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 2: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 4, If 0, Class=Vendor Specific Class, Driver=rtsx_usb, 480M
michel@debg53sw:~$ et aussi :
michel@debg53sw:~$ udisksctl info --block-device /dev/sdc
/org/freedesktop/UDisks2/block_devices/sdc:
org.freedesktop.UDisks2.Block:
Configuration: []
CryptoBackingDevice: '/'
Device: /dev/sdc
DeviceNumber: 2080
Drive: '/org/freedesktop/UDisks2/drives/USB2_2e0_FlashDisk_000000000019C6'
HintAuto: true
HintIconName:
HintIgnore: false
HintName:
HintPartitionable: true
HintSymbolicIconName:
HintSystem: false
Id: by-uuid-2016-06-04-15-34-03-00
IdLabel: Debian 8.5.0 amd64 1
IdType: iso9660
IdUUID: 2016-06-04-15-34-03-00
IdUsage: filesystem
IdVersion: Joliet Extension
MDRaid: '/'
MDRaidMember: '/'
PreferredDevice: /dev/sdc
ReadOnly: false
Size: 1031798272
Symlinks: /dev/disk/by-id/usb-USB2.0_FlashDisk_000000000019C6-0:0
/dev/disk/by-label/Debian\x208.5.0\x20amd64\x201
/dev/disk/by-path/pci-0000:00:1d.0-usb-0:1.1:1.0-scsi-0:0:0:0
/dev/disk/by-uuid/2016-06-04-15-34-03-00
org.freedesktop.UDisks2.PartitionTable:
Type: dos
michel@debg53sw:~$ Ci-dessus, J'utilise aussi les informations contenues dans les noms des liens symboliques qui ont été créés par le système quand la clef a été détectée.
Dernière modification par MicP (Le 09/10/2016, à 21:14)
Hors ligne
#25 Le 09/10/2016, à 22:48
- Coeur Noir
Re : dmesg rempli de : reset high-speed USB [ à peu près résolu ]
Merci pour ces infos MicP. Au fait pour le bios que me conseilles-tu ? Voir https://forum.ubuntu-fr.org/viewtopic.p … #p21603547 ;-)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne