Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 15/10/2016, à 14:42

shoooryuken

Reboot intempestif - recherche des origines

Bonjour,
j'utilise Ubuntu depuis près de 2 mois, bref, je suis un noob, et un noob qui à un PC qui reboot tout seul de manière aléatoire, parfois 3 fois d'affilé, parfois pas de 8h...

Je viens de formater et réinstaller, le problème est toujours de mise.

Je cherche comment Ubuntu pourrait m'aider a trouver l'origine du problème. par exemple, enregistrer les tensions de l'alimentation, tester le disque dur, l'état de la carte graphique...

dans l'etat, j'ai passé memtest et aucune erreur.
j'ai installé lm-sensor, mais, il n'enregistre pas (sauf erreur de ma part) les tensions / température (mais les mesures)


merci par avance

Dernière modification par shoooryuken (Le 15/10/2016, à 15:24)

Hors ligne

#2 Le 16/10/2016, à 00:27

winux12

Re : Reboot intempestif - recherche des origines

Bonsoir,
j'avais eu çà, il y a quelques années !
essai de remettre ton bios aux options par défaut
ensuite, as-tu essayé par élimination d'éventuels problème matériel ?
Exemple :
Retirer la carte graphique (si c'est une tour), bien sur si tu en as une et la possibilité de brancher ton écran sur un autre port.
Retirer les barrettes de RAM une après l'autre, les remonter en changeant de slot


La LIBERTE n'a pas de prix ... Dell E7270 - Core I7 - 16 Go Ram
TuxLibre - ARU2L
Adhérent à l'APRIL
1 Photo - 1 Jour   Twitter 

Hors ligne

#3 Le 16/10/2016, à 01:48

Coeur Noir

Re : Reboot intempestif - recherche des origines

La commande

dmesg

peut renseigner : copie-colle son retour ici entre balises code ( ça peut être long, plusieurs dizaines de lignes ).
balises code
Des infos sur le pc peuvent éclairer aussi : quantité de RAM, type de processeur, architecture, référence carte graphique…

Dernière modification par Coeur Noir (Le 16/10/2016, à 01:50)


DébuterDocBien rédigerRetour commandeInsérer image | illustrations & captures d'écran <>

Hors ligne

#4 Le 16/10/2016, à 09:48

shoooryuken

Re : Reboot intempestif - recherche des origines

Bonjour
merci pour vos réponses,

Je vais essayer de mettre le bios par défaut, mais, si ce n'est les ordre de boot, je n'ai rien modifié.
ca ne vient pas:
- de l'écran, puisque celui ci reste allumé
- de la ram, memetest donne un 100% ok
- des températures qui semblent bonnes selon lm-sensor et le bios
- CPU / GPU / SSD ne sont pas sur exploité lors des reboot

- les températures semblent correctes, les tension stables d'après lm-sensor

radeon-pci-0100
Adapter: PCI adapter
temp1:        +38.0°C  (crit = +120.0°C, hyst = +90.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +34.0°C  (high = +83.0°C, crit = +99.0°C)
Core 1:       +30.0°C  (high = +83.0°C, crit = +99.0°C)
Core 2:       +32.0°C  (high = +83.0°C, crit = +99.0°C)
Core 3:       +30.0°C  (high = +83.0°C, crit = +99.0°C)

atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:       +0.85 V  (min =  +0.80 V, max =  +1.60 V)
 +3.3 Voltage:       +3.34 V  (min =  +2.97 V, max =  +3.63 V)
 +5 Voltage:         +5.11 V  (min =  +4.50 V, max =  +5.50 V)
 +12 Voltage:       +12.10 V  (min = +10.20 V, max = +13.80 V)
CPU FAN Speed:       958 RPM  (min =  600 RPM, max = 7200 RPM)
CHASSIS1 FAN Speed: 1155 RPM  (min =  600 RPM, max = 7200 RPM)
CHASSIS2 FAN Speed:    0 RPM  (min =  600 RPM, max = 7200 RPM)
POWER FAN Speed:       0 RPM  (min =  600 RPM, max = 7200 RPM)
CPU Temperature:     +40.0°C  (high = +60.0°C, crit = +95.0°C)
MB Temperature:      +29.0°C  (high = +45.0°C, crit = +75.0°C)


la configuration:

SAPPHIRE TECHNOLOGY Radeon HD 5770 Vapor-X - 1 Go GDDR5 - PCI-Express 2.0 (11163-00-20R)

ASUS P7P55D LE - Socket 1156 - Chipset P55 - ATX

OCZ Mémoire PC Platinum Low Voltage 2 x 2 Go DDR3-1333 PC3-10666 (OCZ3P1333LV4GK)

Corsair Alimentation PC CMPSU-550VXEU - 550W

Intel Core i5-750 - 2,66 GHz - Cache L3 8 Mo - Socket LGA 1156

SSD Crucial 128go ( 1 an tout juste)


Journalctl releve quelques erreur au démarrage (notamment du à lm-sensor mais je l''ai installé suite aux reboot...)

-- Logs begin at sam. 2016-10-15 15:35:04 CEST, end at sam. 2016-10-15 15:37:07 CEST. --
oct. 15 15:35:04 Akuma systemd-modules-load[290]: Failed to insert 'w83627ehf': Device or resource busy
oct. 15 15:35:04 Akuma systemd-modules-load[290]: Failed to insert 'w83627ehf': Device or resource busy
oct. 15 15:35:04 Akuma systemd[1]: Failed to start Load Kernel Modules.
oct. 15 15:35:06 Akuma NetworkManager[862]: nm_device_get_device_type: assertion 'NM_IS_DEVICE (self)' failed
oct. 15 15:35:06 Akuma wpa_supplicant[1048]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
oct. 15 15:35:06 Akuma wpa_supplicant[1048]: dbus: Failed to construct signal
oct. 15 15:35:07 Akuma lightdm[1057]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
oct. 15 15:35:07 Akuma lightdm[1057]: PAM adding faulty module: pam_kwallet.so
oct. 15 15:35:07 Akuma lightdm[1057]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory
oct. 15 15:35:07 Akuma lightdm[1057]: PAM adding faulty module: pam_kwallet5.so
oct. 15 15:35:07 Akuma lightdm[1111]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
oct. 15 15:35:07 Akuma lightdm[1111]: PAM adding faulty module: pam_kwallet.so
oct. 15 15:35:07 Akuma lightdm[1111]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory
oct. 15 15:35:07 Akuma lightdm[1111]: PAM adding faulty module: pam_kwallet5.so
oct. 15 15:35:08 Akuma pulseaudio[1224]: [pulseaudio] pid.c: Daemon already running.
oct. 15 15:35:13 Akuma pulseaudio[1847]: [pulseaudio] pid.c: Daemon already running.
oct. 15 15:35:13 Akuma pulseaudio[1851]: [pulseaudio] pid.c: Daemon already running.
oct. 15 15:35:32 Akuma pulseaudio[1775]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out
oct. 15 15:36:07 Akuma systemd-modules-load[2313]: Failed to insert 'w83627ehf': Device or resource busy
oct. 15 15:36:08 Akuma systemd-modules-load[2313]: Failed to insert 'w83627ehf': Device or resource busy
oct. 15 15:36:08 Akuma systemd[1]: Failed to start Load Kernel Modules. 

voici le résultat de la commande dmesg

gouken@Akuma:~$ dmesg
[    0.000000] microcode: CPU0 microcode updated early to revision 0x7, date = 2013-08-20
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-42-generic (buildd@lgw01-13) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #62-Ubuntu SMP Fri Oct 7 23:11:45 UTC 2016 (Ubuntu 4.4.0-42.62-generic 4.4.21)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.4.0-42-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf76ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf770000-0x00000000bf787fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf788000-0x00000000bf7dbfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf7dc000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: System manufacturer System Product Name/P7P55D LE, BIOS 0605    09/24/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   3 base 0FFFE0000 mask FFFFF0000 write-protect
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xbf770 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[    0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x335de000-0x35ae6fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FB9F0 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000BF770000 000040 (v01 092409 RSDT1813 20090924 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000BF770200 000084 (v01 092409 FACP1813 20090924 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000BF7704A0 00D45F (v01 A1380  A1380001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 0x00000000BF788000 000040
[    0.000000] ACPI: APIC 0x00000000BF770390 0000CC (v01 092409 APIC1813 20090924 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000BF770460 00003C (v01 092409 OEMMCFG  20090924 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000BF788040 000072 (v01 092409 OEMB1813 20090924 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000BF77F4A0 000038 (v01 092409 OEMHPET  20090924 MSFT 00000097)
[    0.000000] ACPI: OSFR 0x00000000BF77F4E0 0000B0 (v01 092409 OEMOSFR  20090924 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000BF7896D0 000363 (v01 DpgPmm CpuPm    00000012 INTL 20060113)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13fff8000-0x13fffcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bf76ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1046286
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12190 pages used for memmap
[    0.000000]   DMA32 zone: 780144 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf770000-0xbf787fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf788000-0xbf7dbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf7dc000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88013b200000 s98008 r8192 d28968 u262144
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1029915
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-42-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3994696K/4185144K available (8409K kernel code, 1283K rwdata, 3944K rodata, 1480K init, 1292K bss, 190448K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=16
[    0.000000] NR_IRQS:16640 nr_irqs:552 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2674.762 MHz processor
[    0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 5349.52 BogoMIPS (lpj=10699048)
[    0.000034] pid_max: default: 32768 minimum: 301
[    0.000040] ACPI: Core revision 20150930
[    0.009281] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.009305] Security Framework initialized
[    0.009307] Yama: becoming mindful.
[    0.009325] AppArmor: AppArmor initialized
[    0.009601] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.010359] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.010682] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.010688] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.010877] Initializing cgroup subsys io
[    0.010881] Initializing cgroup subsys memory
[    0.010887] Initializing cgroup subsys devices
[    0.010890] Initializing cgroup subsys freezer
[    0.010891] Initializing cgroup subsys net_cls
[    0.010893] Initializing cgroup subsys perf_event
[    0.010895] Initializing cgroup subsys net_prio
[    0.010899] Initializing cgroup subsys hugetlb
[    0.010900] Initializing cgroup subsys pids
[    0.010919] CPU: Physical Processor ID: 0
[    0.010920] CPU: Processor Core ID: 0
[    0.010924] mce: CPU supports 9 MCE banks
[    0.010933] CPU0: Thermal monitoring enabled (TM1)
[    0.010939] process: using mwait in idle threads
[    0.010942] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.010943] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.011223] Freeing SMP alternatives memory: 32K (ffffffff820b4000 - ffffffff820bc000)
[    0.035004] ftrace: allocating 32007 entries in 126 pages
[    0.048487] smpboot: Max logical packages: 4
[    0.048489] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.048494] Switched APIC routing to physical flat.
[    0.048866] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.193457] smpboot: CPU0: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz (family: 0x6, model: 0x1e, stepping: 0x5)
[    0.193472] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[    0.193488] core: CPU erratum AAJ80 worked around
[    0.193489] core: CPUID marked event: 'bus cycles' unavailable
[    0.193491] ... version:                3
[    0.193492] ... bit width:              48
[    0.193492] ... generic registers:      4
[    0.193493] ... value mask:             0000ffffffffffff
[    0.193494] ... max period:             000000007fffffff
[    0.193495] ... fixed-purpose events:   3
[    0.193496] ... event mask:             000000070000000f
[    0.194274] x86: Booting SMP configuration:
[    0.194276] .... node  #0, CPUs:        #1
[    0.194960] microcode: CPU1 microcode updated early to revision 0x7, date = 2013-08-20
[    0.197277] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.197361]   #2
[    0.197966] microcode: CPU2 microcode updated early to revision 0x7, date = 2013-08-20
[    0.200113]   #3
[    0.200624] microcode: CPU3 microcode updated early to revision 0x7, date = 2013-08-20
[    0.202702] x86: Booted up 1 node, 4 CPUs
[    0.202705] smpboot: Total of 4 processors activated (21398.09 BogoMIPS)
[    0.205466] devtmpfs: initialized
[    0.207541] evm: security.selinux
[    0.207542] evm: security.SMACK64
[    0.207543] evm: security.SMACK64EXEC
[    0.207544] evm: security.SMACK64TRANSMUTE
[    0.207545] evm: security.SMACK64MMAP
[    0.207545] evm: security.ima
[    0.207546] evm: security.capability
[    0.207610] PM: Registering ACPI NVS region [mem 0xbf788000-0xbf7dbfff] (344064 bytes)
[    0.207683] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.207759] pinctrl core: initialized pinctrl subsystem
[    0.207858] RTC time:  7:36:04, date: 10/16/16
[    0.207960] NET: Registered protocol family 16
[    0.217467] cpuidle: using governor ladder
[    0.229465] cpuidle: using governor menu
[    0.229472] PCCT header not found.
[    0.229561] ACPI: bus type PCI registered
[    0.229563] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.229625] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.229627] PCI: not using MMCONFIG
[    0.229628] PCI: Using configuration type 1 for base access
[    0.241805] ACPI: Added _OSI(Module Device)
[    0.241806] ACPI: Added _OSI(Processor Device)
[    0.241808] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.241809] ACPI: Added _OSI(Processor Aggregator Device)
[    0.243648] ACPI: Executed 1 blocks of module-level executable AML code
[    0.249095] ACPI: Dynamic OEM Table Load:
[    0.249103] ACPI: SSDT 0xFFFF88013AD1E000 001130 (v01 DpgPmm P001Ist  00000011 INTL 20060113)
[    0.249499] ACPI: Dynamic OEM Table Load:
[    0.249503] ACPI: SSDT 0xFFFF880139C53000 0004D5 (v01 PmRef  P001Cst  00003001 INTL 20060113)
[    0.249980] ACPI: Interpreter enabled
[    0.249989] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.250001] ACPI: (supports S0 S1 S3 S4 S5)
[    0.250002] ACPI: Using IOAPIC for interrupt routing
[    0.250026] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.250916] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.250920] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.251391] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.257143] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.257148] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.257297] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.257370] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.257372] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.257374] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.257375] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.257599] PCI host bridge to bus 0000:00
[    0.257602] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.257604] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.257605] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.257607] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.257609] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[    0.257610] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
[    0.257612] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.257620] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
[    0.257723] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
[    0.257770] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.257813] pci 0000:00:03.0: System wakeup disabled by ACPI
[    0.257851] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[    0.257946] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[    0.258040] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[    0.258133] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[    0.258221] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[    0.258302] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[    0.258400] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.258427] pci 0000:00:1a.0: reg 0x10: [mem 0xfbafe000-0xfbafe3ff]
[    0.258494] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.258534] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.258571] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.258595] pci 0000:00:1b.0: reg 0x10: [mem 0xfbaf8000-0xfbafbfff 64bit]
[    0.258652] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.258722] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.258778] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.258819] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.258857] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[    0.258913] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.258954] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.258989] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[    0.259045] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.259086] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.259123] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
[    0.259184] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.259225] pci 0000:00:1c.6: System wakeup disabled by ACPI
[    0.259260] pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400
[    0.259321] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.259362] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    0.259399] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.259425] pci 0000:00:1d.0: reg 0x10: [mem 0xfbafd000-0xfbafd3ff]
[    0.259493] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.259532] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.259566] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.259642] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.259679] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
[    0.259837] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
[    0.259856] pci 0000:00:1f.2: reg 0x10: [io  0xac00-0xac07]
[    0.259863] pci 0000:00:1f.2: reg 0x14: [io  0xa880-0xa883]
[    0.259870] pci 0000:00:1f.2: reg 0x18: [io  0xa800-0xa807]
[    0.259876] pci 0000:00:1f.2: reg 0x1c: [io  0xa480-0xa483]
[    0.259883] pci 0000:00:1f.2: reg 0x20: [io  0xa400-0xa40f]
[    0.259890] pci 0000:00:1f.2: reg 0x24: [io  0xa080-0xa08f]
[    0.259974] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.259990] pci 0000:00:1f.3: reg 0x10: [mem 0xfbafc000-0xfbafc0ff 64bit]
[    0.260008] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.260085] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
[    0.260104] pci 0000:00:1f.5: reg 0x10: [io  0xbc00-0xbc07]
[    0.260111] pci 0000:00:1f.5: reg 0x14: [io  0xb880-0xb883]
[    0.260118] pci 0000:00:1f.5: reg 0x18: [io  0xb800-0xb807]
[    0.260124] pci 0000:00:1f.5: reg 0x1c: [io  0xb480-0xb483]
[    0.260131] pci 0000:00:1f.5: reg 0x20: [io  0xb400-0xb40f]
[    0.260138] pci 0000:00:1f.5: reg 0x24: [io  0xb080-0xb08f]
[    0.260258] pci 0000:01:00.0: [1002:68b8] type 00 class 0x030000
[    0.260280] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.260289] pci 0000:01:00.0: reg 0x18: [mem 0xfbbc0000-0xfbbdffff 64bit]
[    0.260296] pci 0000:01:00.0: reg 0x20: [io  0xc000-0xc0ff]
[    0.260307] pci 0000:01:00.0: reg 0x30: [mem 0xfbba0000-0xfbbbffff pref]
[    0.260331] pci 0000:01:00.0: supports D1 D2
[    0.260376] pci 0000:01:00.1: [1002:aa58] type 00 class 0x040300
[    0.260397] pci 0000:01:00.1: reg 0x10: [mem 0xfbbfc000-0xfbbfffff 64bit]
[    0.260445] pci 0000:01:00.1: supports D1 D2
[    0.265487] pci 0000:00:03.0: PCI bridge to [bus 01]
[    0.265493] pci 0000:00:03.0:   bridge window [io  0xc000-0xcfff]
[    0.265499] pci 0000:00:03.0:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.265506] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.265557] pci 0000:00:1c.0: PCI bridge to [bus 06]
[    0.265600] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.265644] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.265717] pci 0000:03:00.0: [197b:2361] type 00 class 0x010185
[    0.265817] pci 0000:03:00.0: reg 0x24: [mem 0xfbdfe000-0xfbdfffff]
[    0.265870] pci 0000:03:00.0: PME# supported from D3hot
[    0.265934] pci 0000:03:00.1: [197b:2361] type 00 class 0x010185
[    0.265962] pci 0000:03:00.1: reg 0x10: [io  0xec00-0xec07]
[    0.265972] pci 0000:03:00.1: reg 0x14: [io  0xe880-0xe883]
[    0.265981] pci 0000:03:00.1: reg 0x18: [io  0xe800-0xe807]
[    0.265991] pci 0000:03:00.1: reg 0x1c: [io  0xe480-0xe483]
[    0.266000] pci 0000:03:00.1: reg 0x20: [io  0xe400-0xe40f]
[    0.266094] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.266103] pci 0000:00:1c.6: PCI bridge to [bus 03]
[    0.266106] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
[    0.266109] pci 0000:00:1c.6:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.266165] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.266203] pci 0000:02:00.0: reg 0x10: [io  0xd800-0xd8ff]
[    0.266229] pci 0000:02:00.0: reg 0x18: [mem 0xfafff000-0xfaffffff 64bit pref]
[    0.266246] pci 0000:02:00.0: reg 0x20: [mem 0xfaff8000-0xfaffbfff 64bit pref]
[    0.266257] pci 0000:02:00.0: reg 0x30: [mem 0xfbcf0000-0xfbcfffff pref]
[    0.266313] pci 0000:02:00.0: supports D1 D2
[    0.266315] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.273493] pci 0000:00:1c.7: PCI bridge to [bus 02]
[    0.273500] pci 0000:00:1c.7:   bridge window [io  0xd000-0xdfff]
[    0.273505] pci 0000:00:1c.7:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.273513] pci 0000:00:1c.7:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[    0.273564] pci 0000:07:02.0: [1814:0301] type 00 class 0x028000
[    0.273585] pci 0000:07:02.0: reg 0x10: [mem 0xfbef8000-0xfbefffff]
[    0.273710] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[    0.273715] pci 0000:00:1e.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.273721] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.273722] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.273724] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.273726] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.273727] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[    0.273729] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
[    0.274329] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.274376] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.274420] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.274466] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.274511] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.274557] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.274603] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.274648] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[    0.274695] ACPI: Enabled 3 GPEs in block 00 to 3F
[    0.274793] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.274795] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.274796] vgaarb: loaded
[    0.274797] vgaarb: bridge control possible 0000:01:00.0
[    0.274992] SCSI subsystem initialized
[    0.275021] libata version 3.00 loaded.
[    0.275040] ACPI: bus type USB registered
[    0.275055] usbcore: registered new interface driver usbfs
[    0.275062] usbcore: registered new interface driver hub
[    0.275077] usbcore: registered new device driver usb
[    0.275192] PCI: Using ACPI for IRQ routing
[    0.280798] PCI: Discovered peer bus ff
[    0.280799] PCI: root bus ff: using default resources
[    0.280800] PCI: Probing PCI hardware (bus ff)
[    0.280826] ACPI: \: failed to evaluate _DSM (0x1001)
[    0.280828] PCI host bridge to bus 0000:ff
[    0.280830] pci_bus 0000:ff: root bus resource [io  0x0000-0xffff]
[    0.280831] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[    0.280833] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[    0.280835] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.280840] pci 0000:ff:00.0: [8086:2c51] type 00 class 0x060000
[    0.280882] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
[    0.280922] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
[    0.280960] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
[    0.281001] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
[    0.281039] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
[    0.281077] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
[    0.281116] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
[    0.281154] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
[    0.281192] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
[    0.281231] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
[    0.281271] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
[    0.281309] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
[    0.281347] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
[    0.281385] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
[    0.281433] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[    0.281435] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.281440] PCI: pci_cache_line_size set to 64 bytes
[    0.281507] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.281509] e820: reserve RAM buffer [mem 0xbf770000-0xbfffffff]
[    0.281609] NetLabel: Initializing
[    0.281610] NetLabel:  domain hash size = 128
[    0.281611] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.281623] NetLabel:  unlabeled traffic allowed by default
[    0.281700] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[    0.281707] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[    0.281711] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.283741] hpet: hpet2 irq 24 for MSI
[    0.283773] hpet: hpet3 irq 25 for MSI
[    0.283804] hpet: hpet4 irq 26 for MSI
[    0.283842] hpet: hpet5 irq 27 for MSI
[    0.283858] amd_nb: Cannot enumerate AMD northbridges
[    0.283870] clocksource: Switched to clocksource hpet
[    0.289319] AppArmor: AppArmor Filesystem Enabled
[    0.289377] pnp: PnP ACPI init
[    0.289453] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[    0.289455] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[    0.289458] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[    0.289460] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.289464] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.289524] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.289687] system 00:02: [io  0x0290-0x029f] has been reserved
[    0.289690] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.289850] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.289853] system 00:03: [io  0x0800-0x087f] could not be reserved
[    0.289855] system 00:03: [io  0x0500-0x057f] has been reserved
[    0.289857] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.289859] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.289860] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
[    0.289863] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.289961] system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved
[    0.289964] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.290126] pnp 00:05: [dma 0 disabled]
[    0.290180] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.290274] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.290277] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.290280] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.290364] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.290367] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.290518] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.290520] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.290522] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.290524] system 00:08: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.290526] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.290529] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.290635] pnp: PnP ACPI: found 9 devices
[    0.297084] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.297104] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 06] add_size 1000
[    0.297107] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
[    0.297109] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000
[    0.297116] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
[    0.297119] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[    0.297121] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000
[    0.297128] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.297130] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.297132] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[    0.297139] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.297157] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.297159] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.297161] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.297163] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.297165] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.297167] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.297169] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.297171] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.297173] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.297174] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.297176] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.297178] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.297180] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.297182] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.297184] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.297186] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.297188] pci 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.297189] pci 0000:00:1c.4: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.297191] pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.297193] pci 0000:00:1c.5: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.297198] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[    0.297202] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.297204] pci 0000:00:1c.4: BAR 14: assigned [mem 0xc0400000-0xc05fffff]
[    0.297208] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.297210] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0800000-0xc09fffff]
[    0.297213] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0a00000-0xc0bfffff 64bit pref]
[    0.297217] pci 0000:00:1c.6: BAR 15: assigned [mem 0xc0c00000-0xc0dfffff 64bit pref]
[    0.297219] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.297221] pci 0000:00:1c.4: BAR 13: assigned [io  0x2000-0x2fff]
[    0.297223] pci 0000:00:1c.5: BAR 13: assigned [io  0x3000-0x3fff]
[    0.297227] pci 0000:00:03.0: PCI bridge to [bus 01]
[    0.297230] pci 0000:00:03.0:   bridge window [io  0xc000-0xcfff]
[    0.297233] pci 0000:00:03.0:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.297236] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.297240] pci 0000:00:1c.0: PCI bridge to [bus 06]
[    0.297242] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.297246] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.297249] pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.297254] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.297256] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.297260] pci 0000:00:1c.4:   bridge window [mem 0xc0400000-0xc05fffff]
[    0.297263] pci 0000:00:1c.4:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.297268] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.297270] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.297274] pci 0000:00:1c.5:   bridge window [mem 0xc0800000-0xc09fffff]
[    0.297277] pci 0000:00:1c.5:   bridge window [mem 0xc0a00000-0xc0bfffff 64bit pref]
[    0.297282] pci 0000:00:1c.6: PCI bridge to [bus 03]
[    0.297285] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
[    0.297289] pci 0000:00:1c.6:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.297292] pci 0000:00:1c.6:   bridge window [mem 0xc0c00000-0xc0dfffff 64bit pref]
[    0.297297] pci 0000:00:1c.7: PCI bridge to [bus 02]
[    0.297299] pci 0000:00:1c.7:   bridge window [io  0xd000-0xdfff]
[    0.297303] pci 0000:00:1c.7:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.297306] pci 0000:00:1c.7:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[    0.297311] pci 0000:00:1e.0: PCI bridge to [bus 07]
[    0.297315] pci 0000:00:1e.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.297322] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.297324] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.297326] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.297327] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.297329] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff window]
[    0.297331] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
[    0.297332] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.297334] pci_bus 0000:01: resource 1 [mem 0xfbb00000-0xfbbfffff]
[    0.297335] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.297337] pci_bus 0000:06: resource 0 [io  0x1000-0x1fff]
[    0.297339] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.297340] pci_bus 0000:06: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.297342] pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
[    0.297343] pci_bus 0000:05: resource 1 [mem 0xc0400000-0xc05fffff]
[    0.297345] pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.297347] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.297348] pci_bus 0000:04: resource 1 [mem 0xc0800000-0xc09fffff]
[    0.297350] pci_bus 0000:04: resource 2 [mem 0xc0a00000-0xc0bfffff 64bit pref]
[    0.297351] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.297353] pci_bus 0000:03: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.297354] pci_bus 0000:03: resource 2 [mem 0xc0c00000-0xc0dfffff 64bit pref]
[    0.297356] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.297358] pci_bus 0000:02: resource 1 [mem 0xfbc00000-0xfbcfffff]
[    0.297359] pci_bus 0000:02: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[    0.297361] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.297363] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7 window]
[    0.297364] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff window]
[    0.297366] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.297367] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.297369] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff window]
[    0.297371] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff window]
[    0.297374] pci_bus 0000:ff: resource 4 [io  0x0000-0xffff]
[    0.297375] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[    0.297407] NET: Registered protocol family 2
[    0.297565] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.297663] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.297803] TCP: Hash tables configured (established 32768 bind 32768)
[    0.297829] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.297857] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.297933] NET: Registered protocol family 1
[    0.298243] pci 0000:01:00.0: Video device with shadowed ROM
[    0.298248] pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue
[    0.298252] pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue
[    0.298273] PCI: CLS 32 bytes, default 64
[    0.298317] Trying to unpack rootfs image as initramfs...
[    0.887032] Freeing initrd memory: 37924K (ffff8800335de000 - ffff880035ae7000)
[    0.887061] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.887063] software IO TLB [mem 0xbb770000-0xbf770000] (64MB) mapped at [ffff8800bb770000-ffff8800bf76ffff]
[    0.887243] Scanning for low memory corruption every 60 seconds
[    0.887707] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    0.887770] audit: initializing netlink subsys (disabled)
[    0.887786] audit: type=2000 audit(1476603363.760:1): initialized
[    0.888137] Initialise system trusted keyring
[    0.888228] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.889647] zbud: loaded
[    0.889830] VFS: Disk quotas dquot_6.6.0
[    0.889866] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.890116] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.890334] fuse init (API version 7.23)
[    0.890466] Key type big_key registered
[    0.890485] Allocating IMA MOK and blacklist keyrings.
[    0.890747] Key type asymmetric registered
[    0.890750] Asymmetric key parser 'x509' registered
[    0.890786] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.890812] io scheduler noop registered
[    0.890814] io scheduler deadline registered (default)
[    0.890843] io scheduler cfq registered
[    0.891059] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[    0.891151] pcieport 0000:00:1c.4: enabling device (0104 -> 0107)
[    0.891238] pcieport 0000:00:1c.5: enabling device (0104 -> 0107)
[    0.891509] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.891515] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.891543] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[    0.891544] vesafb: scrolling: redraw
[    0.891546] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.891565] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000800000, using 5824k, total 5824k
[    0.891659] Console: switching to colour frame buffer device 175x65
[    0.891695] fb0: VESA VGA frame buffer device
[    0.891710] intel_idle: MWAIT substates: 0x1120
[    0.891714] intel_idle: v0.4.1 model 0x1E
[    0.891715] intel_idle: lapic_timer_reliable_states 0x2
[    0.891899] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.891902] ACPI: Power Button [PWRB]
[    0.891954] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.891956] ACPI: Power Button [PWRF]
[    0.892107] GHES: HEST is not enabled!
[    0.892183] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.912589] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.914806] Linux agpgart interface v0.103
[    0.918015] brd: module loaded
[    0.919446] loop: module loaded
[    0.919570] ata_piix 0000:00:1f.2: version 2.13
[    0.919643] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.920517] scsi host0: ata_piix
[    0.920737] scsi host1: ata_piix
[    0.920772] ata1: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 21
[    0.920776] ata2: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 21
[    0.920847] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.921649] scsi host2: ata_piix
[    0.921895] scsi host3: ata_piix
[    0.921929] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 21
[    0.921931] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 21
[    0.922011] libphy: Fixed MDIO Bus: probed
[    0.922013] tun: Universal TUN/TAP device driver, 1.6
[    0.922014] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.922136] PPP generic driver version 2.4.2
[    0.922212] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.922223] ehci-pci: EHCI PCI platform driver
[    0.922322] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.922328] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.922339] ehci-pci 0000:00:1a.0: debug port 2
[    0.926263] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
[    0.926272] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbafe000
[    0.936164] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.936214] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.936216] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.936218] usb usb1: Product: EHCI Host Controller
[    0.936220] usb usb1: Manufacturer: Linux 4.4.0-42-generic ehci_hcd
[    0.936221] usb usb1: SerialNumber: 0000:00:1a.0
[    0.936548] hub 1-0:1.0: USB hub found
[    0.936561] hub 1-0:1.0: 2 ports detected
[    0.936737] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.936743] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.936752] ehci-pci 0000:00:1d.0: debug port 2
[    0.940666] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
[    0.940676] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbafd000
[    0.952056] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.952120] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.952125] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.952128] usb usb2: Product: EHCI Host Controller
[    0.952132] usb usb2: Manufacturer: Linux 4.4.0-42-generic ehci_hcd
[    0.952135] usb usb2: SerialNumber: 0000:00:1d.0
[    0.952497] hub 2-0:1.0: USB hub found
[    0.952510] hub 2-0:1.0: 2 ports detected
[    0.952606] ehci-platform: EHCI generic platform driver
[    0.952615] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.952620] ohci-pci: OHCI PCI platform driver
[    0.952630] ohci-platform: OHCI generic platform driver
[    0.952636] uhci_hcd: USB Universal Host Controller Interface driver
[    0.952688] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.955736] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.955741] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.956170] mousedev: PS/2 mouse device common for all mice
[    0.957036] rtc_cmos 00:01: RTC can wake from S4
[    0.957316] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.957351] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.957370] i2c /dev entries driver
[    0.957442] device-mapper: uevent: version 1.0.3
[    0.957681] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    0.957728] ledtrig-cpu: registered to indicate activity on CPUs
[    0.958917] NET: Registered protocol family 10
[    0.959297] NET: Registered protocol family 17
[    0.959312] Key type dns_resolver registered
[    0.959710] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x7
[    0.959715] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x7
[    0.959753] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x7
[    0.959791] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x7
[    0.959840] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.960395] registered taskstats version 1
[    0.960421] Loading compiled-in X.509 certificates
[    0.961354] Loaded X.509 cert 'Build time autogenerated kernel key: e837129128998c98ce5a834cc756a195b6db2f40'
[    0.961373] zswap: loaded using pool lzo/zbud
[    0.963728] Key type trusted registered
[    0.967723] Key type encrypted registered
[    0.967734] AppArmor: AppArmor sha1 policy hashing enabled
[    0.967740] ima: No TPM chip found, activating TPM-bypass!
[    0.967765] evm: HMAC attrs: 0x1
[    0.968298]   Magic number: 4:548:622
[    0.968315] vesa-framebuffer vesa-framebuffer.0: hash matches
[    0.968467] rtc_cmos 00:01: setting system clock to 2016-10-16 07:36:04 UTC (1476603364)
[    0.969625] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.969627] EDD information not available.
[    0.969663] PM: Hibernation image not present or could not be loaded.
[    1.248079] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.251069] ata4: SATA link down (SStatus 0 SControl 300)
[    1.261856] ata3: SATA link down (SStatus 0 SControl 300)
[    1.264077] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.380728] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    1.380734] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.381229] hub 1-1:1.0: USB hub found
[    1.381431] hub 1-1:1.0: 6 ports detected
[    1.396886] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    1.396893] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.397480] hub 2-1:1.0: USB hub found
[    1.397747] hub 2-1:1.0: 8 ports detected
[    1.570890] ata2.00: SATA link down (SStatus 0 SControl 300)
[    1.570902] ata2.01: SATA link down (SStatus 0 SControl 300)
[    1.652109] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    1.672107] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    1.716171] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.716186] ata1.01: SATA link down (SStatus 0 SControl 300)
[    1.724438] ata1.00: supports DRM functions and may not be fully accessible
[    1.724445] ata1.00: ATA-9: Crucial_CT128M550SSD1, MU01, max UDMA/133
[    1.724449] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.736529] ata1.00: supports DRM functions and may not be fully accessible
[    1.741115] ata1.00: configured for UDMA/133
[    1.741667] scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT128M55 MU01 PQ: 0 ANSI: 5
[    1.742343] ata1.00: Enabling discard_zeroes_data
[    1.742347] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.742399] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.742402] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.742923] sd 0:0:0:0: [sda] Write Protect is off
[    1.742931] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.743041] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.743368] ata1.00: Enabling discard_zeroes_data
[    1.744591]  sda: sda1 sda2 < sda5 >
[    1.745482] ata1.00: Enabling discard_zeroes_data
[    1.745637] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.747076] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[    1.747078] Write protecting the kernel read-only data: 14336k
[    1.747916] Freeing unused kernel memory: 1820K (ffff880001839000 - ffff880001a00000)
[    1.748418] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[    1.760435] random: systemd-udevd: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.760492] random: systemd-udevd: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.760503] random: systemd-udevd: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.760514] random: systemd-udevd: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.760917] random: udevadm: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.760954] random: udevadm: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.761158] random: udevadm: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.761203] random: udevadm: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.761246] random: udevadm: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.761287] random: udevadm: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.771816] usb 2-1.3: New USB device found, idVendor=1b1c, idProduct=1b09
[    1.771818] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.771820] usb 2-1.3: Product: Corsair K70R Gaming Keyboard
[    1.771821] usb 2-1.3: Manufacturer: Corsair
[    1.775806] hidraw: raw HID events driver (C) Jiri Kosina
[    1.779401] usbcore: registered new interface driver usbhid
[    1.779403] usbhid: USB HID core driver
[    1.781614] input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:1B1C:1B09.0001/input/input4
[    1.789968] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.799182] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[    1.799804] scsi host4: pata_jmicron
[    1.799880] scsi host5: pata_jmicron
[    1.799924] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
[    1.799926] ata6: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
[    1.801333] ahci 0000:03:00.0: version 3.0
[    1.801381] ahci 0000:03:00.0: JMB361 has only one port
[    1.801390] ahci 0000:03:00.0: forcing port_map 0x3 -> 0x1
[    1.802468] [drm] Initialized drm 1.1.0 20060810
[    1.803337] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.803346] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.803668] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffc9000000c000, 90:e6:ba:bc:95:6d, XID 083000c0 IRQ 29
[    1.803670] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.816161] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[    1.816165] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    1.816423] scsi host6: ahci
[    1.820015] scsi host7: ahci
[    1.820064] ata7: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 18
[    1.820066] ata8: DUMMY
[    1.833408] [drm] radeon kernel modesetting enabled.
[    1.835337] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.835338] AMD IOMMUv2 functionality not available on this system
[    1.836312] hid-generic 0003:1B1C:1B09.0001: input,hidraw0: USB HID v1.11 Keyboard [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1d.0-1.3/input0
[    1.836776] input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:1B1C:1B09.0002/input/input6
[    1.838299] CRAT table not found
[    1.838300] Finished initializing topology ret=0
[    1.838339] kfd kfd: Initialized module
[    1.838505] checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
[    1.838506] fb: switching to radeondrmfb from VESA VGA
[    1.838531] Console: switching to colour dummy device 80x25
[    1.838827] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8 0x174B:0xD132).
[    1.838838] [drm] register mmio base: 0xFBBC0000
[    1.838839] [drm] register mmio size: 131072
[    1.838875] ATOM BIOS: JUNIPER
[    1.838943] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    1.838945] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    1.838947] [drm] Detected VRAM RAM=1024M, BAR=256M
[    1.838948] [drm] RAM width 128bits DDR
[    1.839033] [TTM] Zone  kernel: Available graphics memory: 2018052 kiB
[    1.839035] [TTM] Initializing pool allocator
[    1.839039] [TTM] Initializing DMA pool allocator
[    1.839054] [drm] radeon: 1024M of VRAM memory ready
[    1.839055] [drm] radeon: 1024M of GTT memory ready.
[    1.839067] [drm] Loading JUNIPER Microcode
[    1.839116] [drm] Internal thermal controller with fan control
[    1.848830] usb 2-1.6: new full-speed USB device number 4 using ehci-pci
[    1.858252] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.869468] [drm] radeon: dpm initialized
[    1.869542] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.870471] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    1.884047] [drm] PCIE GART of 1024M enabled (table at 0x000000000025E000).
[    1.884182] tsc: Refined TSC clocksource calibration: 2674.966 MHz
[    1.884185] radeon 0000:01:00.0: WB enabled
[    1.884187] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880137cbdc00
[    1.884188] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x268eddfda1c, max_idle_ns: 440795338717 ns
[    1.884191] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880137cbdc0c
[    1.885036] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000101c418
[    1.885038] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.885038] [drm] Driver supports precise vblank timestamp query.
[    1.885040] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    1.885067] radeon 0000:01:00.0: radeon: using MSI.
[    1.885091] [drm] radeon: irq initialized.
[    1.892385] hid-generic 0003:1B1C:1B09.0002: input,hidraw1: USB HID v1.11 Device [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1d.0-1.3/input1
[    1.892755] input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:1B1C:1B09.0003/input/input7
[    1.901781] [drm] ring test on 0 succeeded in 1 usecs
[    1.901787] [drm] ring test on 3 succeeded in 2 usecs
[    1.948477] hid-generic 0003:1B1C:1B09.0003: input,hidraw2: USB HID v1.11 Keyboard [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1d.0-1.3/input2
[    1.964275] usb 2-1.6: New USB device found, idVendor=ffc0, idProduct=001f
[    1.964278] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.964279] usb 2-1.6: Product: Revoltec FightMouse PRO
[    1.964281] usb 2-1.6: Manufacturer: Areson
[    1.966043] input: Areson Revoltec FightMouse PRO as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:FFC0:001F.0004/input/input8
[    1.966396] hid-generic 0003:FFC0:001F.0004: input,hidraw3: USB HID v10.01 Mouse [Areson Revoltec FightMouse PRO] on usb-0000:00:1d.0-1.6/input0
[    1.971935] input: Areson Revoltec FightMouse PRO as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:FFC0:001F.0005/input/input9
[    1.988774] ata5.00: ATAPI: TSSTcorpCD/DVDW SH-W162C, TS10, max UDMA/33
[    2.024574] hid-generic 0003:FFC0:001F.0005: input,hidraw4: USB HID v10.01 Mouse [Areson Revoltec FightMouse PRO] on usb-0000:00:1d.0-1.6/input1
[    2.028724] ata5.00: configured for UDMA/33
[    2.031534] scsi 4:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-W162C TS10 PQ: 0 ANSI: 5
[    2.055136] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    2.055138] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.055286] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.055421] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    2.077810] [drm] ring test on 5 succeeded in 1 usecs
[    2.077819] [drm] UVD initialized successfully.
[    2.078107] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.078137] [drm] ib test on ring 3 succeeded in 0 usecs
[    2.140235] ata7: SATA link down (SStatus 0 SControl 300)
[    2.524282] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=0151
[    2.524288] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.524292] usb 1-1.1: Product: USB2.0-CRW
[    2.524295] usb 1-1.1: Manufacturer: Generic
[    2.524298] usb 1-1.1: SerialNumber: 20060413092100000
[    2.530405] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[    2.530587] scsi host8: usb-storage 1-1.1:1.0
[    2.530653] usbcore: registered new interface driver usb-storage
[    2.531993] usbcore: registered new interface driver uas
[    2.728330] [drm] ib test on ring 5 succeeded
[    2.731940] [drm] Radeon Display Connectors
[    2.731942] [drm] Connector 0:
[    2.731943] [drm]   DP-1
[    2.731943] [drm]   HPD4
[    2.731945] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    2.731945] [drm]   Encoders:
[    2.731946] [drm]     DFP1: INTERNAL_UNIPHY2
[    2.731947] [drm] Connector 1:
[    2.731948] [drm]   HDMI-A-1
[    2.731948] [drm]   HPD5
[    2.731949] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    2.731950] [drm]   Encoders:
[    2.731951] [drm]     DFP2: INTERNAL_UNIPHY2
[    2.731951] [drm] Connector 2:
[    2.731952] [drm]   DVI-I-1
[    2.731952] [drm]   HPD1
[    2.731954] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    2.731954] [drm]   Encoders:
[    2.731955] [drm]     DFP3: INTERNAL_UNIPHY1
[    2.731956] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    2.731956] [drm] Connector 3:
[    2.731957] [drm]   DVI-I-2
[    2.731958] [drm]   HPD6
[    2.731959] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[    2.731959] [drm]   Encoders:
[    2.731960] [drm]     DFP4: INTERNAL_UNIPHY
[    2.731961] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.796951] [drm] fb mappable at 0xD045F000
[    2.796952] [drm] vram apper at 0xD0000000
[    2.796953] [drm] size 8294400
[    2.796954] [drm] fb depth is 24
[    2.796955] [drm]    pitch is 7680
[    2.797164] fbcon: radeondrmfb (fb0) is primary device
[    2.797291] Console: switching to colour frame buffer device 240x67
[    2.797334] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    2.808371] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[    2.884607] clocksource: Switched to clocksource tsc
[    3.535504] scsi 8:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[    3.542092] scsi 8:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[    3.548843] scsi 8:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[    3.555718] scsi 8:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[    3.556308] sd 8:0:0:0: Attached scsi generic sg2 type 0
[    3.556753] sd 8:0:0:1: Attached scsi generic sg3 type 0
[    3.557044] sd 8:0:0:2: Attached scsi generic sg4 type 0
[    3.557252] sd 8:0:0:3: Attached scsi generic sg5 type 0
[    3.562257] sd 8:0:0:1: [sdc] Attached SCSI removable disk
[    3.595763] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[    3.597562] sd 8:0:0:2: [sdd] Attached SCSI removable disk
[    3.598428] sd 8:0:0:3: [sde] Attached SCSI removable disk
[    4.820480] floppy0: no floppy controllers found
[    4.820494] work still pending
[   10.046962] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   10.153199] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   10.153313] systemd[1]: Detected architecture x86-64.
[   10.153554] systemd[1]: Set hostname to <Akuma>.
[   10.278388] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.278481] systemd[1]: Listening on Journal Audit Socket.
[   10.278502] systemd[1]: Listening on fsck to fsckd communication Socket.
[   10.278511] systemd[1]: Reached target User and Group Name Lookups.
[   10.278535] systemd[1]: Listening on udev Control Socket.
[   10.278557] systemd[1]: Listening on LVM2 metadata daemon socket.
[   10.278574] systemd[1]: Listening on LVM2 poll daemon socket.
[   10.278649] systemd[1]: Created slice System Slice.
[   10.278715] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   10.278738] systemd[1]: Listening on Syslog Socket.
[   10.278761] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   10.278779] systemd[1]: Listening on udev Kernel Socket.
[   10.278802] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   10.278810] systemd[1]: Reached target Encrypted Volumes.
[   10.278816] systemd[1]: Reached target Remote File Systems (Pre).
[   10.278822] systemd[1]: Reached target Remote File Systems.
[   10.278850] systemd[1]: Listening on Journal Socket.
[   10.288916] systemd[1]: Mounting Debug File System...
[   10.289284] systemd[1]: Started Read required files in advance.
[   10.291991] systemd[1]: Starting Load Kernel Modules...
[   10.292383] systemd[1]: Starting Journal Service...
[   10.292882] systemd[1]: Started Braille Device Support.
[   10.293370] systemd[1]: Mounting Huge Pages File System...
[   10.293829] systemd[1]: Starting Set console keymap...
[   10.294275] systemd[1]: Starting Uncomplicated firewall...
[   10.295448] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   10.295594] systemd[1]: Created slice User and Session Slice.
[   10.295614] systemd[1]: Reached target Slices.
[   10.295807] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.299740] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   10.299801] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.300171] systemd[1]: Mounting POSIX Message Queue File System...
[   10.304357] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   10.313132] systemd[1]: Started Uncomplicated firewall.
[   10.318837] systemd[1]: Mounted Huge Pages File System.
[   10.318877] systemd[1]: Mounted POSIX Message Queue File System.
[   10.318904] systemd[1]: Mounted Debug File System.
[   10.321672] lp: driver loaded but no devices found
[   10.325326] systemd[1]: Starting Create Static Device Nodes in /dev...
[   10.327271] ppdev: user-space parallel port driver
[   10.344154] systemd[1]: Started LVM2 metadata daemon.
[   10.349840] w83627ehf: Found W83667HG-B chip at 0x290
[   10.349860] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_SB_.PCI0.SBRG.SIOR.HWRE) (20150930/utaddress-254)
[   10.349864] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.371888] systemd[1]: Started Journal Service.
[   10.398760] w83627ehf: Found W83667HG-B chip at 0x290
[   10.398788] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_SB_.PCI0.SBRG.SIOR.HWRE) (20150930/utaddress-254)
[   10.398793] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.425009] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[   10.450587] systemd-journald[287]: Received request to flush runtime journal from PID 1
[   10.541944] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.549521] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20150930/utaddress-254)
[   10.549527] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.549530] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000054F (\GPS1) (20150930/utaddress-254)
[   10.549533] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.549534] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000054F (\GPS1) (20150930/utaddress-254)
[   10.549537] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20150930/utaddress-254)
[   10.549539] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.549540] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000054F (\GPS1) (20150930/utaddress-254)
[   10.549543] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20150930/utaddress-254)
[   10.549545] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.549546] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.581278] EDAC MC: Ver: 3.0.0
[   10.585024] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
[   10.585063] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[   10.585069] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[   10.650415] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   10.659125] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2561, rf: 0003, rev: 000c
[   10.665031] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input10
[   10.666957] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.669280] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1828S: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line
[   10.669283] snd_hda_codec_via hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.669285] snd_hda_codec_via hdaudioC0D0:    hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
[   10.669287] snd_hda_codec_via hdaudioC0D0:    mono: mono_out=0x0
[   10.669288] snd_hda_codec_via hdaudioC0D0:    dig-out=0x2d/0x2e
[   10.669290] snd_hda_codec_via hdaudioC0D0:    inputs:
[   10.669292] snd_hda_codec_via hdaudioC0D0:      Front Mic=0x29
[   10.669293] snd_hda_codec_via hdaudioC0D0:      Rear Mic=0x2b
[   10.669295] snd_hda_codec_via hdaudioC0D0:      Line=0x2a
[   10.669296] snd_hda_codec_via hdaudioC0D0:      CD=0x2c
[   10.681759] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   10.681814] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   10.681863] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   10.681915] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   10.681969] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   10.682029] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   10.682080] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   10.682131] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   10.691249] random: nonblocking pool is initialized
[   10.704756] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   10.755936] rt61pci 0000:07:02.0 wlp7s2: renamed from wlan0
[   10.790949] cfg80211: World regulatory domain updated:
[   10.790952] cfg80211:  DFS Master region: unset
[   10.790953] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   10.790955] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   10.790957] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   10.790958] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   10.790960] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   10.790962] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   10.790963] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   10.790965] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   10.790966] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   10.915157] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   10.915964] Adding 4182012k swap on /dev/mapper/ubuntu--vg-swap_1.  Priority:-1 extents:1 across:4182012k SSFS
[   10.919717] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[   11.181033] audit: type=1400 audit(1476603374.708:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=750 comm="apparmor_parser"
[   11.181040] audit: type=1400 audit(1476603374.708:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=750 comm="apparmor_parser"
[   11.181230] audit: type=1400 audit(1476603374.708:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=751 comm="apparmor_parser"
[   11.181236] audit: type=1400 audit(1476603374.708:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=751 comm="apparmor_parser"
[   11.181240] audit: type=1400 audit(1476603374.708:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=751 comm="apparmor_parser"
[   11.181244] audit: type=1400 audit(1476603374.708:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=751 comm="apparmor_parser"
[   11.181645] audit: type=1400 audit(1476603374.708:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=754 comm="apparmor_parser"
[   11.182442] audit: type=1400 audit(1476603374.708:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=756 comm="apparmor_parser"
[   11.183166] audit: type=1400 audit(1476603374.708:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=758 comm="apparmor_parser"
[   11.185671] audit: type=1400 audit(1476603374.712:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=757 comm="apparmor_parser"
[   11.863288] IPv6: ADDRCONF(NETDEV_UP): wlp7s2: link is not ready
[   11.863324] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561s.bin'
[   11.870732] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8
[   11.909957] IPv6: ADDRCONF(NETDEV_UP): wlp7s2: link is not ready
[   11.915819] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   11.982523] r8169 0000:02:00.0 enp2s0: link down
[   11.982532] r8169 0000:02:00.0 enp2s0: link down
[   11.982616] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   12.102600] IPv6: ADDRCONF(NETDEV_UP): wlp7s2: link is not ready
[   13.548916] floppy0: no floppy controllers found
[   14.063057] r8169 0000:02:00.0 enp2s0: link up
[   14.063066] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   74.446950] do_general_protection: 33 callbacks suppressed
[   74.446954] traps: compiz[1977] general protection ip:7f5c10a1387e sp:7ffc6a61be90 error:0 in libunity-core-6.0.so.9.0.0[7f5c1097f000+133000]



Ca manque de balise spoil pour rétrécir les messages...

Dernière modification par shoooryuken (Le 16/10/2016, à 09:49)

Hors ligne

#5 Le 19/10/2016, à 09:58

shoooryuken

Re : Reboot intempestif - recherche des origines

Je me permet de Up, au cas ou il y ait une idée qui ressorte...

cette après midi, je démonte tout et remonte tout, nouvelle pate thermique, bref le ménage d'automne...

Hors ligne