Problème écran noir après ouverture session

Sragilesk · Le 22/11/2016, à 22:06

Bonjour,
Voilà depuis quelques heures j'ai un gros problème.
Mon ordinateur était arrivé au bout de sa batterie (3min de batterie estimé restant) j'ai donc décidé de le mettre en veille le temps d'aller le brancher pour le recharger dans mon salon.
Arrivé là-bas l'ordinateur je le branche, et là il se rallume comme si il avait été éteint.
J'en déduis que la batterie s'est vidé malgré la mise en veille.

Je me log et là écran noir. J'attends et rien ne se passe. J'appuie sur le bouton on/off brièvement et l'ordinateur s'éteint.

Je tente alors de le rallumer et d'essayer d'ouvrir la session invité. Et là tout fonctionne parfaitement.

Je sort de la session. Me connecte de nouveau à la mienne et là rebelotte écran noir

Je suis sous Ubuntu 16.04.1 je n'ai aucune idée de ce qui arrive.

Pouvez-vous m'aider ? J'ai vraiment besoin de cet ordinateur pour mon travail.

Merci beaucoup par avance pour vos réponses.

Sragilesk.

tarkan99 · Le 22/11/2016, à 23:21

Salut !

Après connexion, donc avec l'écran noir, as-tu accès à la console avec la combinaison Ctrl Alt F6 ?

Si oui, alors tente de renommer le fichier .Xauthority via

mv .Xauthority{,.bak}

ferme la console via Exit et revient en graphique via Ctrl Alt F7

Dernière modification par tarkan99 (Le 22/11/2016, à 23:29)

Sragilesk · Le 22/11/2016, à 23:32

Oui j'ai accès à la console avec l'écran noir.

Alors voilà les informations que j'ai avec uname -a.

 Linux communal-K75VJ 4.4.0-47-generic #68-Ubuntu Smp Wed Oct 26 19:39:52 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

tarkan99 · Le 22/11/2016, à 23:35

as-tu testé

mv .Xauthority{,.bak}

Sragilesk · Le 22/11/2016, à 23:40

Je n'avais pas essayé.
Mais après la commande effectuée le problème persiste.

tarkan99 · Le 22/11/2016, à 23:45

dans la console, que donne

dmesg | tail -n 200

y vois tu des erreurs concernant xorg ?

En attendant une solution définitive, tu pourrais créer un nouvel utilisateur en ligne de commande
https://doc.ubuntu-fr.org/adduser

Dernière modification par tarkan99 (Le 22/11/2016, à 23:51)

Sragilesk · Le 23/11/2016, à 00:05

Alors voilà le résultat de la commande.

 [    2.166166] [TTM] Initializing pool allocator
[    2.166172] [TTM] Initializing DMA pool allocator
[    2.166185] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[    2.166188] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    2.166192] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    2.166195] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    2.166197] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000
[    2.166200] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000000
[    2.177406] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.177407] [drm] Driver supports precise vblank timestamp query.
[    2.216469] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[    2.275806] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x60000, bo ffff880221ab5000
[    2.275954] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[    2.275961] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[    2.298025] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.302325] ata3.00: ATAPI: Slimtype DVD A  DS8A9SH, EAA2, max UDMA/100
[    2.303373] ata3.00: configured for UDMA/100
[    2.312136] scsi 2:0:0:0: CD-ROM            Slimtype DVD A  DS8A9SH   EAA2 PQ: 0 ANSI: 5
[    2.335183] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.335186] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.335382] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.335508] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.445156] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0138
[    2.445170] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.445172] usb 1-1.3: Product: USB2.0-CRW
[    2.445173] usb 1-1.3: Manufacturer: Generic
[    2.445174] usb 1-1.3: SerialNumber: 20090516388200000
[    2.453768] usbcore: registered new interface driver usb-storage
[    2.454822] usbcore: registered new interface driver uas
[    2.455783] ums-realtek 1-1.3:1.0: USB Mass Storage device detected
[    2.474962] scsi host6: usb-storage 1-1.3:1.0
[    2.475102] usbcore: registered new interface driver ums-realtek
[    2.521990] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    2.659613] usb 1-1.4: New USB device found, idVendor=04f2, idProduct=b354
[    2.659621] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.659626] usb 1-1.4: Product: USB2.0 HD UVC WebCam
[    2.659629] usb 1-1.4: Manufacturer: Chicony
[    2.664339] usb 1-1.3: USB disconnect, device number 3
[    2.775466] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[    2.796097] psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[    2.816877] psmouse serio1: elantech: Elan sample query result 05, 24, 64
[    2.930010] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[    3.042222] clocksource: Switched to clocksource tsc
[    3.746544] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.838782] random: nonblocking pool is initialized
[    4.937575] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    4.937691] systemd[1]: Detected architecture x86-64.
[    4.957129] systemd[1]: Set hostname to <communal-K75VJ>.
[    6.492674] systemd[1]: Listening on udev Control Socket.
[    6.492738] systemd[1]: Reached target User and Group Name Lookups.
[    6.492758] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.492815] systemd[1]: Listening on Journal Audit Socket.
[    6.492889] systemd[1]: Created slice System Slice.
[    6.492912] systemd[1]: Listening on udev Kernel Socket.
[    6.492943] systemd[1]: Listening on Journal Socket.
[    6.502377] systemd[1]: Started Read required files in advance.
[    6.502915] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.502970] systemd[1]: Listening on Syslog Socket.
[    6.503001] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.503012] systemd[1]: Reached target Remote File Systems (Pre).
[    6.503021] systemd[1]: Reached target Remote File Systems.
[    6.503111] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    6.606348] systemd[1]: Starting Load Kernel Modules...
[    6.606442] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.606879] systemd[1]: Mounting Huge Pages File System...
[    6.607301] systemd[1]: Starting Uncomplicated firewall...
[    6.607781] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.607862] systemd[1]: Created slice User and Session Slice.
[    6.607878] systemd[1]: Reached target Slices.
[    6.607889] systemd[1]: Reached target Encrypted Volumes.
[    6.714826] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.730233] systemd[1]: Starting Journal Service...
[    6.730611] systemd[1]: Mounting POSIX Message Queue File System...
[    6.730939] systemd[1]: Started Braille Device Support.
[    6.731317] systemd[1]: Starting Set console keymap...
[    6.731625] systemd[1]: Mounting Debug File System...
[    7.053827] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.066452] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.066923] systemd[1]: Started Uncomplicated firewall.
[    7.160348] systemd[1]: Mounted Debug File System.
[    7.160392] systemd[1]: Mounted Huge Pages File System.
[    7.160416] systemd[1]: Mounted POSIX Message Queue File System.
[    7.218931] lp: driver loaded but no devices found
[    7.230532] ppdev: user-space parallel port driver
[    7.386568] systemd[1]: Started Load Kernel Modules.
[    7.398223] systemd[1]: Mounting FUSE Control File System...
[    7.398697] systemd[1]: Starting Apply Kernel Variables...
[    7.400712] systemd[1]: Mounted FUSE Control File System.
[    7.806193] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    7.806465] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[    7.806471] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    7.806609] nouveau 0000:01:00.0: DRM: suspending console...
[    7.806613] nouveau 0000:01:00.0: DRM: suspending display...
[    7.806626] nouveau 0000:01:00.0: DRM: evicting buffers...
[    7.806627] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[    7.806682] nouveau 0000:01:00.0: DRM: suspending client object trees...
[    7.806825] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[    7.957298] systemd[1]: Started Apply Kernel Variables.
[    8.136191] systemd[1]: Started Set console keymap.
[    8.166384] systemd[1]: Started Journal Service.
[   11.102322] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   11.281304] systemd-journald[260]: Received request to flush runtime journal from PID 1
[   11.818831] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[   11.818836] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.818840] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[   11.818843] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[   11.818845] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.818846] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[   11.818849] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[   11.818851] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.818852] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[   11.818854] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[   11.818856] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.818857] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   11.962571] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.293709] AVX version of gcm_enc/dec engaged.
[   12.293712] AES CTR mode by8 optimization enabled
[   12.777892] asus_wmi: ASUS WMI generic driver loaded
[   12.810481] asus_wmi: Initialization: 0x1
[   12.810554] asus_wmi: BIOS WMI version: 7.8
[   12.810618] asus_wmi: SFUN value: 0x4a0077
[   12.811111] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input10
[   12.811656] asus_wmi: Number of fans: 0
[   13.543865] ath9k 0000:03:00.0: enabling device (0100 -> 0102)
[   13.543998] ath: phy0: Disable PLL PowerSave
[   13.551429] ath: phy0: Enable LNA combining
[   13.552679] ath: phy0: ASPM enabled: 0x43
[   13.552681] ath: EEPROM regdomain: 0x60
[   13.552681] ath: EEPROM indicates we should expect a direct regpair map
[   13.552683] ath: Country alpha2 being used: 00
[   13.552684] ath: Regpair used: 0x60
[   13.667582] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.667835] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90002300000, irq=17
[   13.817645] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[   13.842228] intel_rapl: Found RAPL domain package
[   13.842231] intel_rapl: Found RAPL domain core
[   13.842233] intel_rapl: Found RAPL domain uncore
[   13.842238] intel_rapl: RAPL package 0 domain package locked by BIOS
[   14.105306] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[   14.249295] cfg80211: World regulatory domain updated:
[   14.249299] cfg80211:  DFS Master region: unset
[   14.249301] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   14.249303] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   14.249304] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   14.249305] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   14.249307] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   14.249309] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   14.249310] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   14.249311] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   14.249312] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   14.290744] media: Linux media interface: v0.10
[   14.310927] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   14.310930] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.310932] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   14.310933] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   14.310934] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   14.310935] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   14.310937] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   14.329420] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   14.329494] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   14.329564] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   14.335921] Linux video capture interface: v2.00
[   14.849023] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b354)
[   14.854092] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input14
[   14.854183] usbcore: registered new interface driver uvcvideo
[   14.854185] USB Video Class driver (1.1.1)
[   15.894575] Adding 8262652k swap on /dev/sda3.  Priority:-1 extents:1 across:8262652k FS
[   18.534814] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[   18.682768] nouveau 0000:01:00.0: DRM: resuming client object trees...
[   18.682776] nouveau 0000:01:00.0: DRM: resuming display...
[   18.682794] nouveau 0000:01:00.0: DRM: resuming console...
[   23.822653] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   23.822907] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[   23.822912] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   23.823050] nouveau 0000:01:00.0: DRM: suspending console...
[   23.823054] nouveau 0000:01:00.0: DRM: suspending display...
[   23.823065] nouveau 0000:01:00.0: DRM: evicting buffers...
[   23.823067] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[   23.823098] nouveau 0000:01:00.0: DRM: suspending client object trees...
[   23.823258] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[   25.078992] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[   25.224850] nouveau 0000:01:00.0: DRM: resuming client object trees...
[   25.224858] nouveau 0000:01:00.0: DRM: resuming display...
[   25.224876] nouveau 0000:01:00.0: DRM: resuming console...
[   31.119329] audit: type=1400 audit(1479851885.195:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=744 comm="apparmor_parser"
[   31.119338] audit: type=1400 audit(1479851885.195:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=744 comm="apparmor_parser"
[   31.119344] audit: type=1400 audit(1479851885.195:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=744 comm="apparmor_parser"
[   31.119349] audit: type=1400 audit(1479851885.195:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=744 comm="apparmor_parser"
[   31.120502] audit: type=1400 audit(1479851885.195:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=743 comm="apparmor_parser"
[   31.120511] audit: type=1400 audit(1479851885.195:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=743 comm="apparmor_parser"
[   31.120544] audit: type=1400 audit(1479851885.195:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=748 comm="apparmor_parser"
[   31.120552] audit: type=1400 audit(1479851885.195:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=748 comm="apparmor_parser"
[   31.122049] audit: type=1400 audit(1479851885.195:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=749 comm="apparmor_parser"
[   31.123219] audit: type=1400 audit(1479851885.199:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=751 comm="apparmor_parser"
[   36.641421] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   37.137173] r8169 0000:02:00.0 enp2s0: link down
[   37.137227] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   37.208550] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   37.224393] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   37.857228] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready

Je n'ai pas vu d'erreur concernant xorg. Ou je l'ai loupée.

Merci pour la solution temporaire le nouvel utilisateur fonctionne.

tarkan99 · Le 23/11/2016, à 07:29

C'est forcement un fichier de configuration qui est en cause (pour le compte HS). Maintenant, il faut trouver lequel...

via le mode console du compte en question, que donne

startx

que contient le fichier .xsession-errors du compte hs ?

Sragilesk · Le 23/11/2016, à 10:40

Alors quand j'utilise la commande je me retrouve sur une page de bureau avec mes dossiers et fichiers et un curseur en croix.

J'ai cherché le fichier .xsession-errors mais je ne l'ai pas trouvé.

tarkan99 · Le 23/11/2016, à 22:58

après je connais surtout xubuntu, il y a quelques différences avec ubuntu.

je pense qu'il faudra de l'aide d'un expert.

Sragilesk · Le 23/11/2016, à 23:25

D'accord. Merci pour ton aide en tout cas

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 22/11/2016, à 22:06

Problème écran noir après ouverture session

#2 Le 22/11/2016, à 23:21

Re : Problème écran noir après ouverture session

#3 Le 22/11/2016, à 23:32

Re : Problème écran noir après ouverture session

#4 Le 22/11/2016, à 23:35

Re : Problème écran noir après ouverture session

#5 Le 22/11/2016, à 23:40

Re : Problème écran noir après ouverture session

#6 Le 22/11/2016, à 23:45

Re : Problème écran noir après ouverture session

#7 Le 23/11/2016, à 00:05

Re : Problème écran noir après ouverture session

#8 Le 23/11/2016, à 07:29

Re : Problème écran noir après ouverture session

#9 Le 23/11/2016, à 10:40

Re : Problème écran noir après ouverture session

#10 Le 23/11/2016, à 22:58

Re : Problème écran noir après ouverture session

#11 Le 23/11/2016, à 23:25

Re : Problème écran noir après ouverture session

Pied de page des forums