Contenu | Rechercher | Menus

Annonce

Ubuntu 16.04 LTS
Commandez vos DVD et clés USB Ubuntu-fr !

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

#1 Le 15/03/2017, à 15:51

VinyMusic

[Résolu] démarrage UEFI très long

Bonjour,
Après une mise à jour de 16.04.1 vers 16.04.2, le temps de démarrage  qui était de un peu moins de 20 secondes est passé à plus d'une minute.

~ $ systemd-analyze
Startup finished in 29.921s (firmware) + 7.760s (loader) + 8.298s (kernel) + 21.365s (userspace) = 1min 7.344s

Lorsque je lance boot-repair, ça fonctionne, redémarrage en 20 sec... Tant que je redémarre l'ordi mais si je l'éteins, c'est reparti pour 1 minute de démarrage ?...
Je me suis assuré d'avoir bien fait la mise à jour complètement (sudo apt-get upgrade) mais rien ne change.
Voici un boot-info pour tâcher d'y voir clair : http://paste2.org/2pNVdP33
Merci pour vos éclairages parce que là, je sèche...[

Dernière modification par VinyMusic (Le 21/03/2017, à 17:46)


- Linux Mint 18, HP 15-ay008nf, 4Gb, intel i3, SSD Samsung Evo 950 256Gb
- Linux Mint 17.03, PC by surcourf (CLEVO) 13,3'', SU2300, 2048 Go, GMA 4500HD

Hors ligne

#2 Le 16/03/2017, à 09:38

malbo

Re : [Résolu] démarrage UEFI très long

Ton Boot-Info est là :

 Boot Info Script cfd9efe + Boot-Repair extra info      [Boot-Info 26Apr2016]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/Boot/bootx64.efi /EFI/ubuntu/MokManager.efi 
                       /EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi 
                       /EFI/ubuntu/shimx64.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Linux Mint 18.1
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1   488,397,167   488,397,167  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sda1                 2,048     1,050,623     1,048,576 EFI System partition
/dev/sda2             1,050,624   480,188,415   479,137,792 Data partition (Linux)
/dev/sda3           480,188,416   488,396,799     8,208,384 Swap partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        B629-DC91                              vfat       
/dev/sda2        b89450b6-1064-484d-bb60-63f75604217c   ext4       
/dev/sda3        322674ba-3c58-42da-9bb9-7599b23a36ed   swap       
/dev/zram0       47c072e0-2c08-4d4d-b8c8-f72de5044175   swap       
/dev/zram1       0049de1f-d19f-4b6f-8afa-2168a6ed51aa   swap       
/dev/zram2       cdd6c2c3-5a66-4e6e-9edb-6f116e791c92   swap       
/dev/zram3       9660e165-4547-4954-bc68-dc27f6d997c8   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Mar 15 15:38 ata-Samsung_SSD_850_EVO_250GB_S2R6NX0H578346X -> ../../sda
lrwxrwxrwx 1 root root 10 Mar 15 15:38 ata-Samsung_SSD_850_EVO_250GB_S2R6NX0H578346X-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Mar 15 15:38 ata-Samsung_SSD_850_EVO_250GB_S2R6NX0H578346X-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Mar 15 15:38 ata-Samsung_SSD_850_EVO_250GB_S2R6NX0H578346X-part3 -> ../../sda3
lrwxrwxrwx 1 root root  9 Mar 15 15:31 ata-hp_DVDRW_GUD0N_KYIG5QE0054 -> ../../sr0
lrwxrwxrwx 1 root root  9 Mar 15 15:31 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root  9 Mar 15 15:38 wwn-0x5002538d40eae18f -> ../../sda
lrwxrwxrwx 1 root root 10 Mar 15 15:38 wwn-0x5002538d40eae18f-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Mar 15 15:38 wwn-0x5002538d40eae18f-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Mar 15 15:38 wwn-0x5002538d40eae18f-part3 -> ../../sda3

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /boot/efi                vfat       (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)


=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
else
  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=10
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=2
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_mint_theme ###
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
### END /etc/grub.d/06_mint_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Linux Mint 18.1 Cinnamon 64-bit' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-b89450b6-1064-484d-bb60-63f75604217c' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
	else
	  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
	fi
        linux	/boot/vmlinuz-4.8.0-41-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.8.0-41-generic
}
submenu 'Advanced options for Linux Mint 18.1 Cinnamon 64-bit' $menuentry_id_option 'gnulinux-advanced-b89450b6-1064-484d-bb60-63f75604217c' {
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.8.0-41-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-41-generic-advanced-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.8.0-41-generic ...'
	        linux	/boot/vmlinuz-4.8.0-41-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.8.0-41-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.8.0-41-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-41-generic-init-upstart-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.8.0-41-generic ...'
	        linux	/boot/vmlinuz-4.8.0-41-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.8.0-41-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.8.0-41-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-41-generic-recovery-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.8.0-41-generic ...'
	        linux	/boot/vmlinuz-4.8.0-41-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.8.0-41-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.8.0-39-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-39-generic-advanced-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.8.0-39-generic ...'
	        linux	/boot/vmlinuz-4.8.0-39-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.8.0-39-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.8.0-39-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-39-generic-init-upstart-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.8.0-39-generic ...'
	        linux	/boot/vmlinuz-4.8.0-39-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.8.0-39-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.8.0-39-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-39-generic-recovery-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.8.0-39-generic ...'
	        linux	/boot/vmlinuz-4.8.0-39-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.8.0-39-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-65-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-65-generic-advanced-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-65-generic ...'
	        linux	/boot/vmlinuz-4.4.0-65-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-65-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-65-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-65-generic-init-upstart-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-65-generic ...'
	        linux	/boot/vmlinuz-4.4.0-65-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-65-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-65-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-65-generic-recovery-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-65-generic ...'
	        linux	/boot/vmlinuz-4.4.0-65-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-65-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-64-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-64-generic-advanced-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-64-generic ...'
	        linux	/boot/vmlinuz-4.4.0-64-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-64-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-64-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-64-generic-init-upstart-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-64-generic ...'
	        linux	/boot/vmlinuz-4.4.0-64-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-64-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-64-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-64-generic-recovery-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-64-generic ...'
	        linux	/boot/vmlinuz-4.4.0-64-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-64-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-63-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-63-generic-advanced-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-63-generic ...'
	        linux	/boot/vmlinuz-4.4.0-63-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-63-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-63-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-63-generic-init-upstart-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-63-generic ...'
	        linux	/boot/vmlinuz-4.4.0-63-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-63-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-63-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-63-generic-recovery-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-63-generic ...'
	        linux	/boot/vmlinuz-4.4.0-63-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-63-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-62-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-62-generic-advanced-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-62-generic ...'
	        linux	/boot/vmlinuz-4.4.0-62-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-62-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-62-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-62-generic-init-upstart-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-62-generic ...'
	        linux	/boot/vmlinuz-4.4.0-62-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-62-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-62-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-62-generic-recovery-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-62-generic ...'
	        linux	/boot/vmlinuz-4.4.0-62-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-62-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-59-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-59-generic-advanced-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-59-generic ...'
	        linux	/boot/vmlinuz-4.4.0-59-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-59-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-59-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-59-generic-init-upstart-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-59-generic ...'
	        linux	/boot/vmlinuz-4.4.0-59-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-59-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-59-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-59-generic-recovery-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-59-generic ...'
	        linux	/boot/vmlinuz-4.4.0-59-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-59-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-57-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-57-generic-advanced-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-57-generic ...'
	        linux	/boot/vmlinuz-4.4.0-57-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-57-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-57-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-57-generic-init-upstart-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-57-generic ...'
	        linux	/boot/vmlinuz-4.4.0-57-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-57-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-57-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-57-generic-recovery-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-57-generic ...'
	        linux	/boot/vmlinuz-4.4.0-57-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-57-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-53-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-53-generic-advanced-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-53-generic ...'
	        linux	/boot/vmlinuz-4.4.0-53-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-53-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-53-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-53-generic-init-upstart-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-53-generic ...'
	        linux	/boot/vmlinuz-4.4.0-53-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-53-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-53-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-53-generic-recovery-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-53-generic ...'
	        linux	/boot/vmlinuz-4.4.0-53-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-53-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-51-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-51-generic-advanced-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-51-generic ...'
	        linux	/boot/vmlinuz-4.4.0-51-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-51-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-51-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-51-generic-init-upstart-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-51-generic ...'
	        linux	/boot/vmlinuz-4.4.0-51-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-51-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-51-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-51-generic-recovery-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-51-generic ...'
	        linux	/boot/vmlinuz-4.4.0-51-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-51-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-47-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-47-generic-advanced-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-47-generic ...'
	        linux	/boot/vmlinuz-4.4.0-47-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-47-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-47-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-47-generic-init-upstart-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-47-generic ...'
	        linux	/boot/vmlinuz-4.4.0-47-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-47-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-47-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-47-generic-recovery-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-47-generic ...'
	        linux	/boot/vmlinuz-4.4.0-47-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-47-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-45-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-45-generic-advanced-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-45-generic ...'
	        linux	/boot/vmlinuz-4.4.0-45-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-45-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-45-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-45-generic-init-upstart-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-45-generic ...'
	        linux	/boot/vmlinuz-4.4.0-45-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-45-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-45-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-45-generic-recovery-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-45-generic ...'
	        linux	/boot/vmlinuz-4.4.0-45-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-45-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-43-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-43-generic-advanced-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-43-generic ...'
	        linux	/boot/vmlinuz-4.4.0-43-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-43-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-43-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-43-generic-init-upstart-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-43-generic ...'
	        linux	/boot/vmlinuz-4.4.0-43-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-43-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-43-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-43-generic-recovery-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-43-generic ...'
	        linux	/boot/vmlinuz-4.4.0-43-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-43-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-38-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-38-generic-advanced-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-38-generic ...'
	        linux	/boot/vmlinuz-4.4.0-38-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-38-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-38-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-38-generic-init-upstart-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-38-generic ...'
	        linux	/boot/vmlinuz-4.4.0-38-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-38-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-38-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-38-generic-recovery-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-38-generic ...'
	        linux	/boot/vmlinuz-4.4.0-38-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-38-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-21-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-advanced-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-21-generic ...'
	        linux	/boot/vmlinuz-4.4.0-21-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-21-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-21-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-init-upstart-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-21-generic ...'
	        linux	/boot/vmlinuz-4.4.0-21-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-21-generic
	}
	menuentry 'Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-recovery-b89450b6-1064-484d-bb60-63f75604217c' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  b89450b6-1064-484d-bb60-63f75604217c
		else
		  search --no-floppy --fs-uuid --set=root b89450b6-1064-484d-bb60-63f75604217c
		fi
		echo	'Loading Linux 4.4.0-21-generic ...'
	        linux	/boot/vmlinuz-4.4.0-21-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-21-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/25_custom ###

menuentry "EFI/ubuntu/fwupx64.efi" {
search --fs-uuid --no-floppy --set=root B629-DC91
chainloader (${root})/EFI/ubuntu/fwupx64.efi
}

menuentry "EFI/ubuntu/MokManager.efi" {
search --fs-uuid --no-floppy --set=root B629-DC91
chainloader (${root})/EFI/ubuntu/MokManager.efi
}
### END /etc/grub.d/25_custom ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=b89450b6-1064-484d-bb60-63f75604217c /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
#UUID=B629-DC91  /boot/efi       vfat    umask=0077      0       1
# swap was on /dev/sda3 during installation
UUID=322674ba-3c58-42da-9bb9-7599b23a36ed none            swap    sw              0       0




UUID=B629-DC91	/boot/efi	vfat	defaults	0	1
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 219.632118225 = 235.828191232  boot/grub/grub.cfg                             1
  22.676593781 = 24.348807168   boot/vmlinuz-4.4.0-21-generic                  1
   1.601291656 = 1.719373824    boot/vmlinuz-4.4.0-38-generic                  1
   3.636455536 = 3.904614400    boot/vmlinuz-4.4.0-43-generic                  1
 218.542480469 = 234.658201600  boot/vmlinuz-4.4.0-45-generic                  1
   5.865943909 = 6.298509312    boot/vmlinuz-4.4.0-47-generic                  1
   4.402004242 = 4.726616064    boot/vmlinuz-4.4.0-51-generic                  1
 223.257556915 = 239.720976384  boot/vmlinuz-4.4.0-53-generic                  1
   5.351306915 = 5.745922048    boot/vmlinuz-4.4.0-57-generic                  1
 171.711841583 = 184.374185984  boot/vmlinuz-4.4.0-59-generic                  1
 172.540046692 = 185.263464448  boot/vmlinuz-4.4.0-62-generic                  1
 223.413818359 = 239.888760832  boot/vmlinuz-4.4.0-63-generic                  1
  56.553916931 = 60.724305920   boot/vmlinuz-4.4.0-64-generic                  1
   4.581790924 = 4.919660544    boot/vmlinuz-4.4.0-65-generic                  1
 106.549808502 = 114.406985728  boot/vmlinuz-4.8.0-39-generic                  1
  66.551918030 = 71.459577856   boot/vmlinuz-4.8.0-41-generic                  1
  66.551918030 = 71.459577856   vmlinuz                                        1
 106.549808502 = 114.406985728  vmlinuz.old                                    1
 207.147537231 = 222.422974464  boot/initrd.img-4.4.0-21-generic               2
 207.147510529 = 222.422945792  boot/initrd.img-4.4.0-38-generic               3
 222.882167816 = 239.317905408  boot/initrd.img-4.4.0-43-generic               3
 207.147480011 = 222.422913024  boot/initrd.img-4.4.0-45-generic               2
 222.882125854 = 239.317860352  boot/initrd.img-4.4.0-47-generic               2
 222.870002747 = 239.304843264  boot/initrd.img-4.4.0-51-generic               2
 104.547847748 = 112.257396736  boot/initrd.img-4.4.0-53-generic               3
 222.882087708 = 239.317819392  boot/initrd.img-4.4.0-57-generic               3
 222.882053375 = 239.317782528  boot/initrd.img-4.4.0-59-generic               3
 222.882209778 = 239.317950464  boot/initrd.img-4.4.0-62-generic               3
 222.854969025 = 239.288700928  boot/initrd.img-4.4.0-63-generic               4
 223.944786072 = 240.458883072  boot/initrd.img-4.4.0-64-generic               3
 223.499668121 = 239.980941312  boot/initrd.img-4.4.0-65-generic               4
 222.949691772 = 239.390408704  boot/initrd.img-4.8.0-39-generic               4
 218.167407990 = 234.255470592  boot/initrd.img-4.8.0-41-generic               2
 218.167407990 = 234.255470592  initrd.img                                     2
 222.949691772 = 239.390408704  initrd.img.old                                 4

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/2536/mounts) leaked on lvs invocation. Parent PID 9625: bash
File descriptor 63 (pipe:[34082]) leaked on lvs invocation. Parent PID 9625: bash

ADDITIONAL INFORMATION :
=================== log of boot-info 2017-03-15__15h38 ===================
boot-info version : 4ppa40
boot-sav version : 4ppa40
glade2script version : 3.2.3~ppa1
boot-sav-extra version :
File descriptor 9 (/proc/2536/mounts) leaked on lvs invocation. Parent PID 4158: /bin/sh
boot-info is executed in installed-session (Linux Mint 18.1 Serena, serena, LinuxMint, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.8.0-41-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro quiet splash vt.handoff=7

=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Linux Mint 18.1 Serena CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="B629-DC91" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="561dca07-fd79-4c01-a782-d732699f3bd3"
/dev/sda2: UUID="b89450b6-1064-484d-bb60-63f75604217c" TYPE="ext4" PARTUUID="f156acf3-0fd0-4697-947c-572b0740d1e6"
/dev/sda3: UUID="322674ba-3c58-42da-9bb9-7599b23a36ed" TYPE="swap" PARTUUID="4b03afe5-64d5-4aea-9e32-392dc04963c2"
/dev/zram0: UUID="47c072e0-2c08-4d4d-b8c8-f72de5044175" TYPE="swap"
/dev/zram1: UUID="0049de1f-d19f-4b6f-8afa-2168a6ed51aa" TYPE="swap"
/dev/zram2: UUID="cdd6c2c3-5a66-4e6e-9edb-6f116e791c92" TYPE="swap"
/dev/zram3: UUID="9660e165-4547-4954-bc68-dc27f6d997c8" TYPE="swap"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root     4096 mars  15 15:31 grub.d
total 112
-rwxr-xr-x 1 root root  9791 avril 16  2016 00_header
-rwxr-xr-x 1 root root  6258 mars  15  2016 05_debian_theme
-rwxr-xr-x 1 root root  1180 oct.  25  2014 06_mint_theme
-rwxr-xr-x 1 root root 12524 mars  15 15:31 10_linux
-rwxr-xr-x 1 root root 12273 mars  10 17:34 10_linux.dpkg-old
-rwxr-xr-x 1 root root 10634 oct.   1  2012 10_lupin
-rwxr-xr-x 1 root root 11082 avril 16  2016 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root   305 mars  14 17:58 25_custom
-rwxr-xr-x 1 root root 11692 avril 16  2016 30_os-prober
-rwxr-xr-x 1 root root  1418 avril 16  2016 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril 16  2016 40_custom
-rwxr-xr-x 1 root root   216 avril 16  2016 41_custom
-rw-r--r-- 1 root root   483 avril 16  2016 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda2: UUID=B629-DC91	 (sda1)
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bootx64.efi

=================== efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0000,0001,2001,2002,2004
Boot0000* ubuntu	HD(1,GPT,561dca07-fd79-4c01-a782-d732699f3bd3,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot0001* Windows Boot Manager	HD(1,GPT,561dca07-fd79-4c01-a782-d732699f3bd3,0x800,0x100000)/File(EFIMicrosoftBootbootmgfw.efi)RC
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot3000* Internal Hard Disk or Solid State Disk	RC

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	.
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/boot/efi.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA Samsung SSD 850 (scsi)
Disk /dev/sda: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:

Number  Start   End    Size    File system     Name                  Flags
1      1049kB  538MB  537MB   fat32           EFI System Partition  boot, esp
2      538MB   246GB  245GB   ext4
3      246GB   250GB  4203MB  linux-swap(v1)


Model: Unknown (unknown)
Disk /dev/zram3: 506MB
Sector size (logical/physical): 4096B/4096B
Partition Table: loop
Disk Flags:

Number  Start  End    Size   File system     Flags
1      0.00B  506MB  506MB  linux-swap(v1)


Model: Unknown (unknown)
Disk /dev/zram1: 506MB
Sector size (logical/physical): 4096B/4096B
Partition Table: loop
Disk Flags:

Number  Start  End    Size   File system     Flags
1      0.00B  506MB  506MB  linux-swap(v1)


Model: Unknown (unknown)
Disk /dev/zram2: 506MB
Sector size (logical/physical): 4096B/4096B
Partition Table: loop
Disk Flags:

Number  Start  End    Size   File system     Flags
1      0.00B  506MB  506MB  linux-swap(v1)


Model: Unknown (unknown)
Disk /dev/zram0: 506MB
Sector size (logical/physical): 4096B/4096B
Partition Table: loop
Disk Flags:

Number  Start  End    Size   File system     Flags
1      0.00B  506MB  506MB  linux-swap(v1)

=================== parted -lm:

BYT;
/dev/sda:250GB:scsi:512:512:gpt:ATA Samsung SSD 850:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:246GB:245GB:ext4::;
3:246GB:250GB:4203MB:linux-swap(v1)::;

BYT;
/dev/zram3:506MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:506MB:506MB:linux-swap(v1)::;

BYT;
/dev/zram1:506MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:506MB:506MB:linux-swap(v1)::;

BYT;
/dev/zram2:506MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:506MB:506MB:linux-swap(v1)::;

BYT;
/dev/zram0:506MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:506MB:506MB:linux-swap(v1)::;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
zram3 disk        482,9M
zram1 disk        482,9M
sr0   rom          1024M
sda   disk        232,9G
sda2  part ext4   228,5G
sda3  part swap     3,9G
sda1  part vfat     512M
zram2 disk        482,9M
zram0 disk        482,9M

KNAME ROTA RO RM STATE   MOUNTPOINT
zram3    0  0  0         [SWAP]
zram1    0  0  0         [SWAP]
sr0      1  0  1 running
sda      0  0  0 running
sda2     0  0  0         /
sda3     0  0  0         [SWAP]
sda1     0  0  0         /boot/efi
zram2    0  0  0         [SWAP]
zram0    0  0  0         [SWAP]


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1955392k,nr_inodes=488848,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=395572k,mode=755)
/dev/sda2 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (rw,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb,release_agent=/run/cgmanager/agents/cgm-release-agent.hugetlb)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event,release_agent=/run/cgmanager/agents/cgm-release-agent.perf_event)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset,clone_children)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids,release_agent=/run/cgmanager/agents/cgm-release-agent.pids)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=33,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=13406)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
cgmfs on /run/cgmanager/fs type tmpfs (rw,relatime,size=100k,mode=755)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=395572k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)


=================== ls:
/sys/block/sda (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  acpi_thermal_rel autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 initctl input kmsg lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout tpm0 uhid uinput urandom usb userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control
ls: impossible d'accéder à '': Aucun fichier ou dossier de ce type

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 10 00 fe 03 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 91 dc 29 b6 4e  4f 20 4e 41 4d 45 20 20  |..)..).NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     387M  6.3M  381M   2% /run
/dev/sda2      ext4      225G  149G   65G  70% /
tmpfs          tmpfs     1.9G  812K  1.9G   1% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
/dev/sda1      vfat      511M  7.4M  504M   2% /boot/efi
cgmfs          tmpfs     100K     0  100K   0% /run/cgmanager/fs
tmpfs          tmpfs     387M   16K  387M   1% /run/user/1000

=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: B9A94601-A712-4373-9F78-D039FECF9A0F

Device         Start       End   Sectors   Size Type
/dev/sda1       2048   1050623   1048576   512M EFI System
/dev/sda2    1050624 480188415 479137792 228.5G Linux filesystem
/dev/sda3  480188416 488396799   8208384   3.9G Linux swap




Disk /dev/zram0: 482.9 MiB, 506327040 bytes, 123615 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/zram1: 482.9 MiB, 506327040 bytes, 123615 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/zram2: 482.9 MiB, 506327040 bytes, 123615 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/zram3: 482.9 MiB, 506327040 bytes, 123615 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    use-standard-efi-file rename-ms-efi


=================== Final advice in case of suggested repair


Les fichiers de démarrage de [L'OS actuellement utilisé - Linux Mint 18.1 Serena] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

Je ne sais pas voir d'anomalie dans ce Boot-Info. Comme tu as encore les noyaux de la version 16.04.1 (ce sont les noyaux de la famille 4.4.0-x), ce serait intéressant de vérifier si tu as le même pb de démarrage lent en sélectionnant l'entrée "Linux Mint 18.1 Cinnamon 64-bit, with Linux 4.4.0-65-generic" au lieu de démarrer sur l'entrée par défaut du menu Grub (qui utilise le noyau 4.8.0-41). S'il s'avère que le démarrage est de 20 secondes avec ce noyau 4.4.0-65, il serait envisageable de faire 16.04.2 --> 16.04.1(*) mais je n'y crois pas trop. Je veux dire que le passage à 16.04.2 a dû pourrir ton fonctionnement et que la marche arrière ne sera probablement pas possible.
Je note que l'ordi en question est un  HP 15-ay008nf (d'après ta signature).

(*) J'ai pondu une procédure provisoire pour passer de 16.04.2 à 16.04.1 ici. Oui, tu peux monter dans le manège "Rolling HWE Stacks for 16.04" mais rien n'est prévu pour en descendre de ce manège infernal (je ne sais pas trouver de procédure officielle de désinstallation de cette daube). D'où ma procédure non-officielle.

Dernière modification par malbo (Le 16/03/2017, à 10:14)

Hors ligne

#3 Le 16/03/2017, à 13:39

VinyMusic

Re : [Résolu] démarrage UEFI très long

Merci de t'être penché sur ma question...
Je confirme, mon ordi est bien le HP 15-ay008nf (où j'ai échangé le DD pour un SSD) : tout fonctionne même si le wifi est faiblard et le bluetooth intermittent !
Je serai de retour devant mon ordi perso ce soir où je pourrai essayer le changement de noyau.
En attendant, je m'interrogeais sur la commande systemd-analyse qui indique, avant le chargement du kernel, un temps de chargement du firmware de 29s., bizarre, non ?


- Linux Mint 18, HP 15-ay008nf, 4Gb, intel i3, SSD Samsung Evo 950 256Gb
- Linux Mint 17.03, PC by surcourf (CLEVO) 13,3'', SU2300, 2048 Go, GMA 4500HD

Hors ligne

#4 Le 16/03/2017, à 13:47

malbo

Re : [Résolu] démarrage UEFI très long

Tu vas dire que je suis lourd mais je n'ai jamais rien compris au résultat de cette foutue commande "systemd-analyze". Personnellement, je ne sais pas quoi en sortir (du résultat de cette commande) pour avancer vers une quelconque solution. Peut-être que certains pourront t'éclairer sur le sujet ?

Hors ligne

#5 Le 16/03/2017, à 13:54

VinyMusic

Re : [Résolu] démarrage UEFI très long

Je ne risque pas de dire que tu es lourd... là où je ne sais moi-même pas plus en tirer de cette commande !
En tous cas merci pour cette piste que j'explorerai ce soir.


- Linux Mint 18, HP 15-ay008nf, 4Gb, intel i3, SSD Samsung Evo 950 256Gb
- Linux Mint 17.03, PC by surcourf (CLEVO) 13,3'', SU2300, 2048 Go, GMA 4500HD

Hors ligne

#6 Le 16/03/2017, à 19:33

VinyMusic

Re : [Résolu] démarrage UEFI très long

Je ne vois pas de changement avec le kernel 4.4 ou 4.8...
En revanche, en continuant de fouiller, j'ai trouvé d'autres pistes qui tournent autour de grub notamment :
- la documentation sur grub-pc, chap. 8.4 indique :
Si au boot, le lancement de grub est long et que le disque dur fait du bruit, vous souffrez probablement du bug 420933. Le problème semble être que GRUB2 cherche les UUID de toutes les partitions au démarrage, jusqu’à trouver celle contenant /boot/grub. Cela prend du temps.
J'ai poursuivi avec le lien proposé qui pointait vers le forum ici
Ainsi, j'ai tout d'abord essayé de réinstaller grub avec boot-repair... sans succès, j'ai aussi essayé un

sudo upgrade-grub

mais rien n'y fait pour le moment, sniff...


- Linux Mint 18, HP 15-ay008nf, 4Gb, intel i3, SSD Samsung Evo 950 256Gb
- Linux Mint 17.03, PC by surcourf (CLEVO) 13,3'', SU2300, 2048 Go, GMA 4500HD

Hors ligne

#7 Le 16/03/2017, à 19:41

VinyMusic

Re : [Résolu] démarrage UEFI très long

Je viens d'en profiter pour tester les options avances de boot-repair pour purger et réinstaller grub.
Après avoir exécuté toutes les commandes demandées, voici un nouveau boot-info.
Je redémarre la bête et je vous dis kôa !


- Linux Mint 18, HP 15-ay008nf, 4Gb, intel i3, SSD Samsung Evo 950 256Gb
- Linux Mint 17.03, PC by surcourf (CLEVO) 13,3'', SU2300, 2048 Go, GMA 4500HD

Hors ligne

#8 Le 16/03/2017, à 19:47

VinyMusic

Re : [Résolu] démarrage UEFI très long

Bon ben non, ça n'a rien changé...
Le plus épatant dans tout ça étant que le temps de démarrage est de moins 20 sec. quand je redémarre l'ordi (l'écran de grub s'affiche tout de suite), et plus d'1 minute lorsque je l'arrête avant de le redémarrer (l'écran de grub s'affiche après 30 sec...)


- Linux Mint 18, HP 15-ay008nf, 4Gb, intel i3, SSD Samsung Evo 950 256Gb
- Linux Mint 17.03, PC by surcourf (CLEVO) 13,3'', SU2300, 2048 Go, GMA 4500HD

Hors ligne

#9 Le 16/03/2017, à 20:10

malbo

Re : [Résolu] démarrage UEFI très long

Je te prie de faire un redémarrage et passer la commande dmesg dès l'arrivée dans ta session. Tu colleras le résultat obtenu dans ta réponse en utilisant les balises. Ensuite, tu arrêteras l'ordi, tu feras un démarrage et tu passeras la commande dmesg dès ton arrivée dans ta session. Pareil, tu colleras le résultat de cette commande dans ta réponse en utilisant les balises.

Hors ligne

#10 Le 17/03/2017, à 09:18

VinyMusic

Re : [Résolu] démarrage UEFI très long

Je m'en occupe... Dès ce soir ! Désolé, je ne suis pas beaucoup à la maison mais ça va le faire, lentement mais sûrement !


- Linux Mint 18, HP 15-ay008nf, 4Gb, intel i3, SSD Samsung Evo 950 256Gb
- Linux Mint 17.03, PC by surcourf (CLEVO) 13,3'', SU2300, 2048 Go, GMA 4500HD

Hors ligne

#11 Le 17/03/2017, à 17:08

VinyMusic

Re : [Résolu] démarrage UEFI très long

Voici le résultat de la commande dmesg après un démarrage (env. 1 min) :

vinymusic@vinymusic-HP-Notebook ~ $ dmesg
[    0.000000] Linux version 4.8.0-42-generic (buildd@lgw01-48) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #45~16.04.1-Ubuntu SMP Thu Mar 9 14:10:58 UTC 2017 (Ubuntu 4.8.0-42.45~16.04.1-generic 4.8.17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-42-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000086000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b88dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000009b88e000-0x000000009ba8dfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000009ba8e000-0x000000009cc8dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009cc8e000-0x000000009cf8dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cf8e000-0x000000009cffdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cffe000-0x000000009cffefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  SMBIOS=0x9be7f000  ESRT=0x9bf8b118  ACPI 2.0=0x9cffd014 
[    0.000000] esrt: Reserving ESRT space from 0x000000009bf8b118 to 0x000000009bf8b150.
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: HP HP Notebook/81EF, BIOS F.13 07/21/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x15f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
[    0.000000]   1 base 009CFFF000 mask 7FFFFFF000 uncachable
[    0.000000]   2 base 009D000000 mask 7FFF000000 uncachable
[    0.000000]   3 base 009E000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   5 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] total RAM covered: 6607M
[    0.000000]  gran_size: 64K 	chunk_size: 64K 	num_reg: 10  	lose cover RAM: 4194556K
[    0.000000]  gran_size: 64K 	chunk_size: 128K 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 256K 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 512K 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 1M 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 2M 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 32M 	num_reg: 8  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 256M 	num_reg: 6  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 512M 	num_reg: 6  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 128K 	chunk_size: 128K 	num_reg: 10  	lose cover RAM: 4194556K
[    0.000000]  gran_size: 128K 	chunk_size: 256K 	num_reg: 7  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 512K 	num_reg: 7  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 1M 	num_reg: 7  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 2M 	num_reg: 7  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 32M 	num_reg: 8  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 256M 	num_reg: 6  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 512M 	num_reg: 6  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 124K
[    0.000000]  gran_size: 256K 	chunk_size: 256K 	num_reg: 10  	lose cover RAM: 4194556K
[    0.000000]  gran_size: 256K 	chunk_size: 512K 	num_reg: 7  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 1M 	num_reg: 7  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 2M 	num_reg: 7  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 32M 	num_reg: 8  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 256M 	num_reg: 6  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 512M 	num_reg: 6  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 252K
[    0.000000]  gran_size: 512K 	chunk_size: 512K 	num_reg: 10  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 1M 	num_reg: 7  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 2M 	num_reg: 7  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 32M 	num_reg: 8  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 256M 	num_reg: 6  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 512M 	num_reg: 6  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 508K
[    0.000000]  gran_size: 1M 	chunk_size: 1M 	num_reg: 9  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 2M 	num_reg: 7  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 32M 	num_reg: 8  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 256M 	num_reg: 6  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 512M 	num_reg: 6  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 1020K
[    0.000000]  gran_size: 2M 	chunk_size: 2M 	num_reg: 8  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 32M 	num_reg: 8  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 256M 	num_reg: 6  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 512M 	num_reg: 6  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 2044K
[    0.000000]  gran_size: 4M 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 4092K
[    0.000000]  gran_size: 4M 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 4092K
[    0.000000]  gran_size: 4M 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 4092K
[    0.000000]  gran_size: 4M 	chunk_size: 32M 	num_reg: 8  	lose cover RAM: 4092K
[    0.000000]  gran_size: 4M 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 4092K
[    0.000000]  gran_size: 4M 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 4092K
[    0.000000]  gran_size: 4M 	chunk_size: 256M 	num_reg: 6  	lose cover RAM: 4092K
[    0.000000]  gran_size: 4M 	chunk_size: 512M 	num_reg: 6  	lose cover RAM: 4092K
[    0.000000]  gran_size: 4M 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 4092K
[    0.000000]  gran_size: 4M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 4092K
[    0.000000]  gran_size: 8M 	chunk_size: 8M 	num_reg: 6  	lose cover RAM: 8188K
[    0.000000]  gran_size: 8M 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 8188K
[    0.000000]  gran_size: 8M 	chunk_size: 32M 	num_reg: 8  	lose cover RAM: 8188K
[    0.000000]  gran_size: 8M 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 8188K
[    0.000000]  gran_size: 8M 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 8188K
[    0.000000]  gran_size: 8M 	chunk_size: 256M 	num_reg: 6  	lose cover RAM: 8188K
[    0.000000]  gran_size: 8M 	chunk_size: 512M 	num_reg: 6  	lose cover RAM: 8188K
[    0.000000]  gran_size: 8M 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 8188K
[    0.000000]  gran_size: 8M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 8188K
[    0.000000]  gran_size: 16M 	chunk_size: 16M 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 16M 	chunk_size: 32M 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 16M 	chunk_size: 64M 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 16M 	chunk_size: 128M 	num_reg: 4  	lose cover RAM: 16380K
[    0.000000]  gran_size: 16M 	chunk_size: 256M 	num_reg: 4  	lose cover RAM: 16380K
[    0.000000]  gran_size: 16M 	chunk_size: 512M 	num_reg: 4  	lose cover RAM: 16380K
[    0.000000]  gran_size: 16M 	chunk_size: 1G 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 16M 	chunk_size: 2G 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 32M 	chunk_size: 32M 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 32M 	chunk_size: 64M 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 32M 	chunk_size: 128M 	num_reg: 4  	lose cover RAM: 16380K
[    0.000000]  gran_size: 32M 	chunk_size: 256M 	num_reg: 4  	lose cover RAM: 16380K
[    0.000000]  gran_size: 32M 	chunk_size: 512M 	num_reg: 4  	lose cover RAM: 16380K
[    0.000000]  gran_size: 32M 	chunk_size: 1G 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 32M 	chunk_size: 2G 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 64M 	chunk_size: 64M 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 64M 	chunk_size: 128M 	num_reg: 4  	lose cover RAM: 16380K
[    0.000000]  gran_size: 64M 	chunk_size: 256M 	num_reg: 4  	lose cover RAM: 16380K
[    0.000000]  gran_size: 64M 	chunk_size: 512M 	num_reg: 4  	lose cover RAM: 16380K
[    0.000000]  gran_size: 64M 	chunk_size: 1G 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 64M 	chunk_size: 2G 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 128M 	chunk_size: 128M 	num_reg: 4  	lose cover RAM: 81916K
[    0.000000]  gran_size: 128M 	chunk_size: 256M 	num_reg: 4  	lose cover RAM: 81916K
[    0.000000]  gran_size: 128M 	chunk_size: 512M 	num_reg: 4  	lose cover RAM: 81916K
[    0.000000]  gran_size: 128M 	chunk_size: 1G 	num_reg: 5  	lose cover RAM: 81916K
[    0.000000]  gran_size: 128M 	chunk_size: 2G 	num_reg: 5  	lose cover RAM: 81916K
[    0.000000]  gran_size: 256M 	chunk_size: 256M 	num_reg: 3  	lose cover RAM: 212988K
[    0.000000]  gran_size: 256M 	chunk_size: 512M 	num_reg: 4  	lose cover RAM: 212988K
[    0.000000]  gran_size: 256M 	chunk_size: 1G 	num_reg: 5  	lose cover RAM: 212988K
[    0.000000]  gran_size: 256M 	chunk_size: 2G 	num_reg: 5  	lose cover RAM: 212988K
[    0.000000]  gran_size: 512M 	chunk_size: 512M 	num_reg: 2  	lose cover RAM: 475132K
[    0.000000]  gran_size: 512M 	chunk_size: 1G 	num_reg: 2  	lose cover RAM: 475132K
[    0.000000]  gran_size: 512M 	chunk_size: 2G 	num_reg: 2  	lose cover RAM: 475132K
[    0.000000]  gran_size: 1G 	chunk_size: 1G 	num_reg: 2  	lose cover RAM: 475132K
[    0.000000]  gran_size: 1G 	chunk_size: 2G 	num_reg: 2  	lose cover RAM: 475132K
[    0.000000]  gran_size: 2G 	chunk_size: 2G 	num_reg: 2  	lose cover RAM: 475132K
[    0.000000] mtrr_cleanup: can not find optimal value
[    0.000000] please specify mtrr_gran_size/mtrr_chunk_size
[    0.000000] e820: update [mem 0x9cfff000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x9cfff max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff93ed80080000] 80000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x15243b000, 0x15243bfff] PGTABLE
[    0.000000] BRK [0x15243c000, 0x15243cfff] PGTABLE
[    0.000000] BRK [0x15243d000, 0x15243dfff] PGTABLE
[    0.000000] BRK [0x15243e000, 0x15243efff] PGTABLE
[    0.000000] BRK [0x15243f000, 0x15243ffff] PGTABLE
[    0.000000] BRK [0x152440000, 0x152440fff] PGTABLE
[    0.000000] BRK [0x152441000, 0x152441fff] PGTABLE
[    0.000000] BRK [0x152442000, 0x152442fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32e7c000-0x35735fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000009CFFD014 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x000000009CFCB188 0000FC (v01 HPQOEM SLIC-MPC 00000001 HP   01000013)
[    0.000000] ACPI: FACP 0x000000009CFE6000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: DSDT 0x000000009CFD0000 01086A (v02 HPQOEM SLIC-MPC 00000000 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000009CF74000 000040
[    0.000000] ACPI: TCPA 0x000000009CFFC000 000032 (v02 HPQOEM INSYDE   00000000 HP   00040000)
[    0.000000] ACPI: UEFI 0x000000009CFFB000 000236 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: UEFI 0x000000009CFFA000 000042 (v01 HPQOEM INSYDE   00000000 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000009CFF9000 000496 (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFF8000 00004B (v02 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.000000] ACPI: TPM2 0x000000009CFF7000 000034 (v03 HPQOEM INSYDE   00000000 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000009CFF0000 006612 (v01 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000009CFEF000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000009CFEB000 003B2D (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000009CFEA000 0000A5 (v32 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: ASPT 0x000000009CFE9000 000034 (v07 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: BOOT 0x000000009CFE8000 000028 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: DBGP 0x000000009CFE7000 000034 (v01 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: HPET 0x000000009CFE5000 000038 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: LPIT 0x000000009CFE4000 000094 (v01 HPQOEM INSYDE   00000000 HP   00040000)
[    0.000000] ACPI: APIC 0x000000009CFE3000 00008C (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: MCFG 0x000000009CFE2000 00003C (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: WDAT 0x000000009CFE1000 000224 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000009CFCD000 002F87 (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFCC000 000C12 (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFCA000 000539 (v02 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFC9000 000B74 (v02 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFC3000 005F8D (v02 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x000000009CFC2000 0000A8 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: FPDT 0x000000009CFC1000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP   00040000)
[    0.000000] ACPI: BGRT 0x000000009CFC0000 000038 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000015effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x15effb000-0x15effffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000015effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x0000000000085fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000009b88dfff]
[    0.000000]   node   0: [mem 0x000000009cffe000-0x000000009cffefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000015effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000015effffff]
[    0.000000] On node 0 totalpages: 1026067
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 23 pages reserved
[    0.000000]   DMA zone: 3972 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9891 pages used for memmap
[    0.000000]   DMA32 zone: 632975 pages, LIFO batch:31
[    0.000000]   Normal zone: 6080 pages used for memmap
[    0.000000]   Normal zone: 389120 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000009e000000-0x000000009fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00086000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b88e000-0x9ba8dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x9ba8e000-0x9cc8dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cc8e000-0x9cf8dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cf8e000-0x9cffdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cfff000-0x9dffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff93eedec00000 s107864 r8192 d31400 u262144
[    0.000000] pcpu-alloc: s107864 r8192 d31400 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1010009
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-42-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3864800K/4104268K available (8829K kernel code, 1441K rwdata, 3832K rodata, 1548K init, 1296K bss, 239468K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:760 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1995.522 MHz processor
[    0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.04 BogoMIPS (lpj=7982088)
[    0.000030] pid_max: default: 32768 minimum: 301
[    0.000041] ACPI: Core revision 20160422
[    0.029424] ACPI: 10 ACPI AML tables successfully acquired and loaded

[    0.030747] Security Framework initialized
[    0.030748] Yama: becoming mindful.
[    0.030767] AppArmor: AppArmor initialized
[    0.031030] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.031923] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.032336] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.032341] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.032636] CPU: Physical Processor ID: 0
[    0.032636] CPU: Processor Core ID: 0
[    0.032641] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.032642] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.032646] mce: CPU supports 7 MCE banks
[    0.032657] CPU0: Thermal monitoring enabled (TM1)
[    0.032671] process: using mwait in idle threads
[    0.032675] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.032675] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.033115] Freeing SMP alternatives memory: 32K (ffffffff9d0ed000 - ffffffff9d0f5000)
[    0.047883] ftrace: allocating 33450 entries in 131 pages
[    0.065821] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.065822] smpboot: Max logical packages: 4
[    0.065831] DMAR: Host address width 39
[    0.065833] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.065839] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[    0.065840] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.065846] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.065847] DMAR: RMRR base: 0x0000009cc63000 end: 0x0000009cc82fff
[    0.065848] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
[    0.065850] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.065851] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.065852] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.065853] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.066370] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.066371] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.066988] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.106677] TSC deadline timer enabled
[    0.106679] smpboot: CPU0: Intel(R) Core(TM) i3-5005U CPU @ 2.00GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[    0.106683] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.106731] ... version:                3
[    0.106731] ... bit width:              48
[    0.106732] ... generic registers:      4
[    0.106733] ... value mask:             0000ffffffffffff
[    0.106733] ... max period:             00007fffffffffff
[    0.106734] ... fixed-purpose events:   3
[    0.106734] ... event mask:             000000070000000f
[    0.107815] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.107902] x86: Booting SMP configuration:
[    0.107903] .... node  #0, CPUs:      #1 #2 #3
[    0.115693] x86: Booted up 1 node, 4 CPUs
[    0.115696] smpboot: Total of 4 processors activated (15964.17 BogoMIPS)
[    0.120191] devtmpfs: initialized
[    0.120254] x86/mm: Memory block size: 128MB
[    0.122127] evm: security.selinux
[    0.122128] evm: security.SMACK64
[    0.122129] evm: security.SMACK64EXEC
[    0.122129] evm: security.SMACK64TRANSMUTE
[    0.122130] evm: security.SMACK64MMAP
[    0.122130] evm: security.ima
[    0.122131] evm: security.capability
[    0.122193] PM: Registering ACPI NVS region [mem 0x9cc8e000-0x9cf8dfff] (3145728 bytes)
[    0.122298] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.122341] pinctrl core: initialized pinctrl subsystem
[    0.122441] RTC time: 16:05:08, date: 03/17/17
[    0.122538] NET: Registered protocol family 16
[    0.135908] cpuidle: using governor ladder
[    0.151921] cpuidle: using governor menu
[    0.151922] PCCT header not found.
[    0.151959] Simple Boot Flag at 0x44 set to 0x1
[    0.151969] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.151970] ACPI: bus type PCI registered
[    0.151971] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.152034] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.152035] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.152038] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.152358] PCI: Using configuration type 1 for base access
[    0.172071] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.172072] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.172325] ACPI: Added _OSI(Module Device)
[    0.172325] ACPI: Added _OSI(Processor Device)
[    0.172326] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.172327] ACPI: Added _OSI(Processor Aggregator Device)
[    0.172943] ACPI: Executed 15 blocks of module-level executable AML code
[    0.184236] ACPI: Dynamic OEM Table Load:
[    0.184247] ACPI: SSDT 0xFFFF93EED93B8400 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.185310] ACPI: Dynamic OEM Table Load:
[    0.185320] ACPI: SSDT 0xFFFF93EED913E000 0005AA (v02 PmRef  ApIst    00003000 INTL 20130117)
[    0.186433] ACPI: Dynamic OEM Table Load:
[    0.186442] ACPI: SSDT 0xFFFF93EED93AF400 000119 (v02 PmRef  ApCst    00003000 INTL 20130117)
[    0.188427] ACPI : EC: EC started
[    0.188878] ACPI: Interpreter enabled
[    0.188921] ACPI: (supports S0 S3 S4 S5)
[    0.188922] ACPI: Using IOAPIC for interrupt routing
[    0.188956] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.341161] ACPI: Power Resource [FN00] (off)
[    0.341245] ACPI: Power Resource [FN01] (off)
[    0.341327] ACPI: Power Resource [FN02] (off)
[    0.341405] ACPI: Power Resource [FN03] (off)
[    0.341487] ACPI: Power Resource [FN04] (off)
[    0.342395] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.342401] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.342480] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.343238] PCI host bridge to bus 0000:00
[    0.343241] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.343242] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.343246] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.343247] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.343248] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.343249] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.343250] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.343251] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.343252] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.343253] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.343254] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.343255] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.343256] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.343257] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.343259] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.343260] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.343261] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window]
[    0.343262] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfe113fff window]
[    0.343263] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.343271] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.343558] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[    0.343569] pci 0000:00:02.0: reg 0x10: [mem 0xc2000000-0xc2ffffff 64bit]
[    0.343576] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.343581] pci 0000:00:02.0: reg 0x20: [io  0x6000-0x603f]
[    0.343888] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.343898] pci 0000:00:03.0: reg 0x10: [mem 0xc5218000-0xc521bfff 64bit]
[    0.344194] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
[    0.344205] pci 0000:00:04.0: reg 0x10: [mem 0xc5210000-0xc5217fff 64bit]
[    0.344511] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.344528] pci 0000:00:14.0: reg 0x10: [mem 0xc5200000-0xc520ffff 64bit]
[    0.344589] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.344832] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.344870] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.344887] pci 0000:00:16.0: reg 0x10: [mem 0xc5221000-0xc522101f 64bit]
[    0.344950] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.345249] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.345265] pci 0000:00:1b.0: reg 0x10: [mem 0xc521c000-0xc521ffff 64bit]
[    0.345326] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.345587] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.345626] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[    0.345692] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.345969] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.346008] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[    0.346074] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.346306] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.346346] pci 0000:00:1c.5: [8086:9c9a] type 01 class 0x060400
[    0.346419] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.346696] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.346740] pci 0000:00:1f.0: [8086:9cc5] type 00 class 0x060100
[    0.347108] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[    0.347121] pci 0000:00:1f.2: reg 0x10: [io  0x6088-0x608f]
[    0.347128] pci 0000:00:1f.2: reg 0x14: [io  0x6094-0x6097]
[    0.347134] pci 0000:00:1f.2: reg 0x18: [io  0x6080-0x6087]
[    0.347141] pci 0000:00:1f.2: reg 0x1c: [io  0x6090-0x6093]
[    0.347148] pci 0000:00:1f.2: reg 0x20: [io  0x6060-0x607f]
[    0.347155] pci 0000:00:1f.2: reg 0x24: [mem 0xc5224000-0xc52247ff]
[    0.347192] pci 0000:00:1f.2: PME# supported from D3hot
[    0.347450] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.347464] pci 0000:00:1f.3: reg 0x10: [mem 0xc5220000-0xc52200ff 64bit]
[    0.347483] pci 0000:00:1f.3: reg 0x20: [io  0x6040-0x605f]
[    0.347765] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[    0.347793] pci 0000:00:1f.6: reg 0x10: [mem 0xc5223000-0xc5223fff 64bit]
[    0.348198] pci 0000:00:1c.0: PCI bridge to [bus 01-06]
[    0.348202] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.348205] pci 0000:00:1c.0:   bridge window [mem 0xc6000000-0xc6ffffff]
[    0.348209] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[    0.348270] pci 0000:07:00.0: [10ec:8136] type 00 class 0x020000
[    0.348290] pci 0000:07:00.0: reg 0x10: [io  0x4000-0x40ff]
[    0.348318] pci 0000:07:00.0: reg 0x18: [mem 0xc5000000-0xc5000fff 64bit]
[    0.348336] pci 0000:07:00.0: reg 0x20: [mem 0xc5100000-0xc5103fff 64bit pref]
[    0.348431] pci 0000:07:00.0: supports D1 D2
[    0.348432] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.348491] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.360159] pci 0000:00:1c.2: PCI bridge to [bus 07-0c]
[    0.360162] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.360165] pci 0000:00:1c.2:   bridge window [mem 0xc4000000-0xc50fffff]
[    0.360169] pci 0000:00:1c.2:   bridge window [mem 0xc5100000-0xc51fffff 64bit pref]
[    0.360254] pci 0000:0d:00.0: [14e4:4365] type 00 class 0x028000
[    0.360280] pci 0000:0d:00.0: reg 0x10: [mem 0xc3000000-0xc3007fff 64bit]
[    0.360420] pci 0000:0d:00.0: supports D1 D2
[    0.360421] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[    0.360496] pci 0000:0d:00.0: System wakeup disabled by ACPI
[    0.376203] pci 0000:00:1c.5: PCI bridge to [bus 0d-12]
[    0.376206] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.376208] pci 0000:00:1c.5:   bridge window [mem 0xc3000000-0xc3ffffff]
[    0.376213] pci 0000:00:1c.5:   bridge window [mem 0xc1000000-0xc1ffffff 64bit pref]
[    0.444743] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.444796] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.444846] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.444895] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.444944] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.444992] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.445041] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.445089] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.445618] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.445910] ACPI : EC: EC stopped
[    0.445941] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[    0.445942] ACPI : EC: EC started
[    0.446602] SCSI subsystem initialized
[    0.446640] libata version 3.00 loaded.
[    0.446677] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.446679] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.446681] vgaarb: loaded
[    0.446682] vgaarb: bridge control possible 0000:00:02.0
[    0.446702] ACPI: bus type USB registered
[    0.446719] usbcore: registered new interface driver usbfs
[    0.446727] usbcore: registered new interface driver hub
[    0.446746] usbcore: registered new device driver usb
[    0.484164] PCI: Using ACPI for IRQ routing
[    0.490171] PCI: pci_cache_line_size set to 64 bytes
[    0.490236] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.490237] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[    0.490238] e820: reserve RAM buffer [mem 0x9b88e000-0x9bffffff]
[    0.490239] e820: reserve RAM buffer [mem 0x9cfff000-0x9fffffff]
[    0.490240] e820: reserve RAM buffer [mem 0x15f000000-0x15fffffff]
[    0.490347] NetLabel: Initializing
[    0.490347] NetLabel:  domain hash size = 128
[    0.490348] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.490363] NetLabel:  unlabeled traffic allowed by default
[    0.490459] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.490464] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.492485] clocksource: Switched to clocksource hpet
[    0.500285] VFS: Disk quotas dquot_6.6.0
[    0.500305] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.500409] AppArmor: AppArmor Filesystem Enabled
[    0.500465] pnp: PnP ACPI init
[    0.500723] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.500727] system 00:00: [io  0xfd60-0xfd63] has been reserved
[    0.500729] system 00:00: [io  0xffff] has been reserved
[    0.500730] system 00:00: [io  0xffff] has been reserved
[    0.500731] system 00:00: [io  0xffff] has been reserved
[    0.500733] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.500734] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.500738] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.500797] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.500844] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.500847] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.500875] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.500903] pnp 00:04: Plug and Play ACPI device, IDs SYN3221 SYN1e00 SYN0002 PNP0f13 (active)
[    0.564947] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.565392] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.565394] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.565395] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.565396] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.565398] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.565399] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.565401] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.565402] system 00:06: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.565404] system 00:06: [mem 0xff000000-0xff000fff] has been reserved
[    0.565405] system 00:06: [mem 0xff010000-0xffffffff] could not be reserved
[    0.565407] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.565408] system 00:06: [mem 0xa0010000-0xa001ffff] has been reserved
[    0.565409] system 00:06: [mem 0xa0000000-0xa000ffff] has been reserved
[    0.565411] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.565714] pnp: PnP ACPI: found 7 devices
[    0.571855] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.571881] pci 0000:00:1c.0: PCI bridge to [bus 01-06]
[    0.571883] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.571888] pci 0000:00:1c.0:   bridge window [mem 0xc6000000-0xc6ffffff]
[    0.571891] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[    0.571896] pci 0000:00:1c.2: PCI bridge to [bus 07-0c]
[    0.571898] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.571902] pci 0000:00:1c.2:   bridge window [mem 0xc4000000-0xc50fffff]
[    0.571905] pci 0000:00:1c.2:   bridge window [mem 0xc5100000-0xc51fffff 64bit pref]
[    0.571910] pci 0000:00:1c.5: PCI bridge to [bus 0d-12]
[    0.571912] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.571916] pci 0000:00:1c.5:   bridge window [mem 0xc3000000-0xc3ffffff]
[    0.571919] pci 0000:00:1c.5:   bridge window [mem 0xc1000000-0xc1ffffff 64bit pref]
[    0.571925] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.571927] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.571928] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.571929] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.571930] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.571931] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.571932] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.571934] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.571935] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.571936] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.571937] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.571938] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.571939] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.571940] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.571941] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.571943] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.571944] pci_bus 0000:00: resource 20 [mem 0xa0000000-0xdfffffff window]
[    0.571945] pci_bus 0000:00: resource 21 [mem 0xfe000000-0xfe113fff window]
[    0.571946] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.571947] pci_bus 0000:01: resource 1 [mem 0xc6000000-0xc6ffffff]
[    0.571948] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref]
[    0.571950] pci_bus 0000:07: resource 0 [io  0x4000-0x4fff]
[    0.571951] pci_bus 0000:07: resource 1 [mem 0xc4000000-0xc50fffff]
[    0.571952] pci_bus 0000:07: resource 2 [mem 0xc5100000-0xc51fffff 64bit pref]
[    0.571953] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
[    0.571954] pci_bus 0000:0d: resource 1 [mem 0xc3000000-0xc3ffffff]
[    0.571955] pci_bus 0000:0d: resource 2 [mem 0xc1000000-0xc1ffffff 64bit pref]
[    0.571990] NET: Registered protocol family 2
[    0.572161] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.572226] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.572320] TCP: Hash tables configured (established 32768 bind 32768)
[    0.572345] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.572361] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.572416] NET: Registered protocol family 1
[    0.572428] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.572530] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.572531] pci 0000:00:14.0: PCI INT A: not connected
[    0.573896] PCI: CLS 64 bytes, default 64
[    0.573940] Unpacking initramfs...
[    1.338413] Freeing initrd memory: 41704K (ffff93edb2e7c000 - ffff93edb5736000)
[    1.338476] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.338479] software IO TLB [mem 0x973d4000-0x9b3d4000] (64MB) mapped at [ffff93ee173d4000-ffff93ee1b3d3fff]
[    1.338725] Scanning for low memory corruption every 60 seconds
[    1.339069] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.339108] audit: initializing netlink subsys (disabled)
[    1.339129] audit: type=2000 audit(1489766709.324:1): initialized
[    1.339594] Initialise system trusted keyrings
[    1.339664] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.341381] zbud: loaded
[    1.341820] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.342023] fuse init (API version 7.25)
[    1.342158] Allocating IMA blacklist keyring.
[    1.343202] Key type asymmetric registered
[    1.343203] Asymmetric key parser 'x509' registered
[    1.343236] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.343264] io scheduler noop registered
[    1.343265] io scheduler deadline registered (default)
[    1.343272] io scheduler cfq registered
[    1.343768] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.343774] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.343806] efifb: probing for efifb
[    1.343822] efifb: framebuffer at 0xb0000000, using 4160k, total 4160k
[    1.343823] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    1.343823] efifb: scrolling: redraw
[    1.343825] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.343919] Console: switching to colour frame buffer device 170x48
[    1.343935] fb0: EFI VGA frame buffer device
[    1.343942] intel_idle: MWAIT substates: 0x11142120
[    1.343943] intel_idle: v0.4.1 model 0x3D
[    1.344154] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.344226] ACPI: AC Adapter [ACAD] (off-line)
[    1.344302] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C0D:00/input/input0
[    1.344323] ACPI: Lid Switch [LID0]
[    1.344372] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.344374] ACPI: Power Button [PWRB]
[    1.344411] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.344413] ACPI: Power Button [PWRF]
[    1.344478] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECWT] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.344482] ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node ffff93eeda1065a0), AE_NOT_FOUND (20160422/psparse-542)
[    1.344490] acpi PNP0C0B:00: Failed to change power state to D0
[    1.344516] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECWT] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.344519] ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node ffff93eeda1065a0), AE_NOT_FOUND (20160422/psparse-542)
[    1.344524] acpi PNP0C0B:00: Failed to set initial power state
[    1.360433] acpi PNP0C0B:00: Cannot transition from (unknown) to D3hot
[    1.361036] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.361041] ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffff93eeda1066b8), AE_NOT_FOUND (20160422/psparse-542)
[    1.361133] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.361136] ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffff93eeda1066b8), AE_NOT_FOUND (20160422/psparse-542)
[    1.361183] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.361186] ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff93eeda106b90), AE_NOT_FOUND (20160422/psparse-542)
[    1.361224] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.361227] ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff93eeda106b90), AE_NOT_FOUND (20160422/psparse-542)
[    1.361325] thermal LNXTHERM:02: registered as thermal_zone0
[    1.361326] ACPI: Thermal Zone [TZ02] (28 C)
[    1.361366] GHES: HEST is not enabled!
[    1.361451] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.480481] ACPI: Battery Slot [BAT1] (battery present)
[    1.480768] Linux agpgart interface v0.103
[    1.482641] loop: module loaded
[    1.482813] libphy: Fixed MDIO Bus: probed
[    1.482814] tun: Universal TUN/TAP device driver, 1.6
[    1.482815] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.482845] PPP generic driver version 2.4.2
[    1.482882] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.482884] ehci-pci: EHCI PCI platform driver
[    1.482894] ehci-platform: EHCI generic platform driver
[    1.482906] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.482908] ohci-pci: OHCI PCI platform driver
[    1.482916] ohci-platform: OHCI generic platform driver
[    1.482922] uhci_hcd: USB Universal Host Controller Interface driver
[    1.483042] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.483044] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    1.483067] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.483072] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.484140] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[    1.484144] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.484228] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.484229] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.484230] usb usb1: Product: xHCI Host Controller
[    1.484231] usb usb1: Manufacturer: Linux 4.8.0-42-generic xhci-hcd
[    1.484232] usb usb1: SerialNumber: 0000:00:14.0
[    1.484337] hub 1-0:1.0: USB hub found
[    1.484347] hub 1-0:1.0: 11 ports detected
[    1.485856] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.485859] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.485885] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.485887] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.485888] usb usb2: Product: xHCI Host Controller
[    1.485889] usb usb2: Manufacturer: Linux 4.8.0-42-generic xhci-hcd
[    1.485890] usb usb2: SerialNumber: 0000:00:14.0
[    1.485986] hub 2-0:1.0: USB hub found
[    1.485993] hub 2-0:1.0: 4 ports detected
[    1.486390] usb: port power management may be unreliable
[    1.486603] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.512784] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.512788] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.512908] mousedev: PS/2 mouse device common for all mice
[    1.513049] rtc_cmos 00:01: RTC can wake from S4
[    1.513168] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.513196] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.513202] i2c /dev entries driver
[    1.513260] device-mapper: uevent: version 1.0.3
[    1.513322] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    1.513329] intel_pstate: Intel P-state driver initializing
[    1.513510] ledtrig-cpu: registered to indicate activity on CPUs
[    1.513512] EFI Variables Facility v0.08 2004-May-17
[    1.525319] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.553526] NET: Registered protocol family 10
[    1.553759] NET: Registered protocol family 17
[    1.553766] Key type dns_resolver registered
[    1.553991] microcode: sig=0x306d4, pf=0x40, revision=0x22
[    1.554091] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.554249] registered taskstats version 1
[    1.554252] Loading compiled-in X.509 certificates
[    1.558042] Loaded X.509 cert 'Build time autogenerated kernel key: 636a06f854df4b3e5c70b0d6b1ef5516b00d0858'
[    1.558057] zswap: loaded using pool lzo/zbud
[    1.575803] Key type big_key registered
[    1.578566] Key type trusted registered
[    1.581141] Key type encrypted registered
[    1.581144] AppArmor: AppArmor sha1 policy hashing enabled
[    1.581146] ima: No TPM chip found, activating TPM-bypass!
[    1.581163] evm: HMAC attrs: 0x1
[    1.581722]   Magic number: 9:468:85
[    1.581846] rtc_cmos 00:01: setting system clock to 2017-03-17 16:05:09 UTC (1489766709)
[    1.581909] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.581909] EDD information not available.
[    1.581973] PM: Hibernation image not present or could not be loaded.
[    1.583294] Freeing unused kernel memory: 1548K (ffffffff9cf6a000 - ffffffff9d0ed000)
[    1.583295] Write protecting the kernel read-only data: 14336k
[    1.583706] Freeing unused kernel memory: 1396K (ffff93eed1aa3000 - ffff93eed1c00000)
[    1.584430] Freeing unused kernel memory: 264K (ffff93eed1fbe000 - ffff93eed2000000)
[    1.593473] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.606639] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.606724] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.606736] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.606751] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.606815] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.606845] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.608120] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.608173] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.608186] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.608611] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.643722] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.646745] sdhci: Secure Digital Host Controller Interface driver
[    1.646750] sdhci: Copyright(c) Pierre Ossman
[    1.647753] hidraw: raw HID events driver (C) Jiri Kosina
[    1.658294] wmi: Mapper loaded
[    1.664613] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.664623] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.665131] r8169 0000:07:00.0 eth0: RTL8106e at 0xffffc5af00672000, ec:8e:b5:0c:6e:a5, XID 04900000 IRQ 43
[    1.666217] ahci 0000:00:1f.2: version 3.0
[    1.668548] [drm] Initialized drm 1.1.0 20060810
[    1.676480] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.676484] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.678874] scsi host0: ahci
[    1.679458] scsi host1: ahci
[    1.679516] ata1: SATA max UDMA/133 abar m2048@0xc5224000 port 0xc5224100 irq 44
[    1.679517] ata2: SATA max UDMA/133 abar m2048@0xc5224000 port 0xc5224180 irq 44
[    1.694677] r8169 0000:07:00.0 enp7s0: renamed from eth0
[    1.707892] [drm] Memory usable by graphics device = 4096M
[    1.707895] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[    1.707896] fb: switching to inteldrmfb from EFI VGA
[    1.707920] Console: switching to colour dummy device 80x25
[    1.708012] [drm] Replacing VGA console driver
[    1.713899] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.713900] [drm] Driver supports precise vblank timestamp query.
[    1.716486] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.787749] random: fast init done
[    1.812405] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    1.831538] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.832598] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    1.832729] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
[    1.937388] fbcon: inteldrmfb (fb0) is primary device
[    1.937482] Console: switching to colour frame buffer device 170x48
[    1.937510] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.954235] usb 1-2: New USB device found, idVendor=3938, idProduct=1031
[    1.954237] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.954238] usb 1-2: Product: 2.4G Wireless Mouse
[    1.954240] usb 1-2: Manufacturer: MOSART Semi.
[    1.958441] usbcore: registered new interface driver usbhid
[    1.958442] usbhid: USB HID core driver
[    1.960066] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:3938:1031.0001/input/input7
[    1.960256] hid-generic 0003:3938:1031.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:00:14.0-2/input0
[    1.994938] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.994959] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.996620] ata1.00: supports DRM functions and may not be fully accessible
[    1.997297] ata1.00: disabling queued TRIM support
[    1.997299] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
[    1.997300] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.997623] ata2.00: ATAPI: hp       DVDRW  GUD0N, PD00, max UDMA/133
[    1.997918] ata1.00: supports DRM functions and may not be fully accessible
[    1.998480] ata1.00: disabling queued TRIM support
[    1.998822] ata1.00: configured for UDMA/133
[    1.999058] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
[    2.001102] ata2.00: configured for UDMA/133
[    2.028621] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    2.028637] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.028685] sd 0:0:0:0: [sda] Write Protect is off
[    2.028688] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.028707] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.030206]  sda: sda1 sda2 sda3
[    2.030471] scsi 1:0:0:0: CD-ROM            hp       DVDRW  GUD0N     PD00 PQ: 0 ANSI: 5
[    2.030537] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.056028] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.056030] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.056244] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.056352] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.076403] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[    2.218220] usb 1-4: New USB device found, idVendor=0a5c, idProduct=216d
[    2.218223] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.218228] usb 1-4: Product: BCM43142A0
[    2.218229] usb 1-4: Manufacturer: Broadcom Corp
[    2.218231] usb 1-4: SerialNumber: 441CA8ADBCB0
[    2.336383] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[    2.340367] tsc: Refined TSC clocksource calibration: 1995.380 MHz
[    2.340373] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39864456686, max_idle_ns: 881590680204 ns
[    2.382088] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
[    2.386634] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
[    2.415921] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
[    2.473514] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3127, fw id: 8526786
[    2.510207] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.514609] usb 1-5: New USB device found, idVendor=05c8, idProduct=038f
[    2.514611] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.514612] usb 1-5: Product: HP TrueVision HD
[    2.514613] usb 1-5: Manufacturer: Generic
[    2.514614] usb 1-5: SerialNumber: 200901010001
[    2.624340] raid6: sse2x1   gen()  6152 MB/s
[    2.692338] raid6: sse2x1   xor()  4579 MB/s
[    2.760336] raid6: sse2x2   gen()  7479 MB/s
[    2.828330] raid6: sse2x2   xor()  4985 MB/s
[    2.896319] raid6: sse2x4   gen()  8734 MB/s
[    2.964320] raid6: sse2x4   xor()  6202 MB/s
[    3.032314] raid6: avx2x1   gen() 11970 MB/s
[    3.100306] raid6: avx2x2   gen() 13843 MB/s
[    3.168304] raid6: avx2x4   gen() 15792 MB/s
[    3.168305] raid6: using algorithm avx2x4 gen() 15792 MB/s
[    3.168306] raid6: using avx2x2 recovery algorithm
[    3.169577] xor: automatically using best checksumming function: avx
[    3.186628] Btrfs loaded, crc32c=crc32c-intel
[    3.364446] clocksource: Switched to clocksource tsc
[    8.284236] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    8.458072] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    8.458220] systemd[1]: Detected architecture x86-64.
[    8.458372] systemd[1]: Set hostname to <vinymusic-HP-Notebook>.
[    8.525884] systemd[1]: Listening on LVM2 metadata daemon socket.
[    8.525953] systemd[1]: Reached target Remote File Systems (Pre).
[    8.525992] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.526025] systemd[1]: Listening on Journal Socket.
[    8.526123] systemd[1]: Created slice User and Session Slice.
[    8.526132] systemd[1]: Reached target User and Group Name Lookups.
[    8.526158] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.589231] lp: driver loaded but no devices found
[    8.594136] ppdev: user-space parallel port driver
[    8.632627] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    8.644844] systemd-journald[341]: Received request to flush runtime journal from PID 1
[    8.669518] random: crng init done
[    8.750688] Initializing HPQ6001 module
[    8.750816] input: HP Wireless hotkeys as /devices/virtual/input/input8
[    8.852962] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.890172] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    8.919222] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[    8.919333] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[    8.919431] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[    8.923101] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    8.923104] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.923106] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    8.923108] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    8.923110] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    8.923112] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x19
[    8.923114] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[    8.947532] media: Linux media interface: v0.10
[    8.955772] Linux video capture interface: v2.00
[    8.964936] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    8.964938] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    8.964939] RAPL PMU: hw unit of domain package 2^-14 Joules
[    8.964940] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    8.964941] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    8.970933] uvcvideo: Found UVC 1.00 device HP TrueVision HD (05c8:038f)
[    8.978058] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[    8.978062] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[    8.978064] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[    8.978190] input: HP TrueVision HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input12
[    8.978887] usbcore: registered new interface driver uvcvideo
[    8.978888] USB Video Class driver (1.1.1)
[    8.984956] wl: loading out-of-tree module taints kernel.
[    8.984962] wl: module license 'MIXED/Proprietary' taints kernel.
[    8.984962] Disabling lock debugging due to kernel taint
[    8.989199] wl: module verification failed: signature and/or required key missing - tainting kernel
[    9.012809] Adding 4104188k swap on /dev/sda3.  Priority:-1 extents:1 across:4104188k SSFS
[    9.015649] Bluetooth: Core ver 2.21
[    9.015662] NET: Registered protocol family 31
[    9.015663] Bluetooth: HCI device and connection manager initialized
[    9.015671] Bluetooth: HCI socket layer initialized
[    9.015674] Bluetooth: L2CAP socket layer initialized
[    9.015688] Bluetooth: SCO socket layer initialized
[    9.018612] AVX2 version of gcm_enc/dec engaged.
[    9.018614] AES CTR mode by8 optimization enabled
[    9.110209] kvm: disabled by bios
[    9.123062] usbcore: registered new interface driver btusb
[    9.123201] wlan0: Broadcom BCM4365 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
[    9.148049] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[    9.148211] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[    9.167657] intel_rapl: Found RAPL domain package
[    9.167660] intel_rapl: Found RAPL domain core
[    9.167662] intel_rapl: Found RAPL domain uncore
[    9.167664] intel_rapl: Found RAPL domain dram
[    9.167668] intel_rapl: RAPL package 0 domain package locked by BIOS
[    9.167678] intel_rapl: RAPL package 0 domain dram locked by BIOS
[    9.240375] zram: Added device: zram0
[    9.257534] zram: Added device: zram1
[    9.262067] zram: Added device: zram2
[    9.264002] zram: Added device: zram3
[    9.279298] zram0: detected capacity change from 0 to 506331136
[    9.287359] Adding 494460k swap on /dev/zram0.  Priority:5 extents:1 across:494460k SSFS
[    9.288612] zram1: detected capacity change from 0 to 506331136
[    9.297171] Adding 494460k swap on /dev/zram1.  Priority:5 extents:1 across:494460k SSFS
[    9.300262] zram2: detected capacity change from 0 to 506331136
[    9.306384] Adding 494460k swap on /dev/zram2.  Priority:5 extents:1 across:494460k SSFS
[    9.307381] zram3: detected capacity change from 0 to 506331136
[    9.320452] Adding 494460k swap on /dev/zram3.  Priority:5 extents:1 across:494460k SSFS
[    9.349004] wl 0000:0d:00.0 wlp13s0: renamed from wlan0
[    9.366839] cgroup: new mount options do not match the existing superblock, will be ignored
[    9.648625] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[    9.655350] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[    9.845079] r8169 0000:07:00.0 enp7s0: link down
[    9.845125] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[    9.982490] input: HP WMI hotkeys as /devices/virtual/input/input15
[   11.070722] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.070727] Bluetooth: BNEP filters: protocol multicast
[   11.070732] Bluetooth: BNEP socket layer initialized
[   11.139751] Bluetooth: hci0 command 0x1001 tx timeout
[   19.170671] Bluetooth: hci0: BCM: Reading local version info failed (-110)
[   21.185435] Bluetooth: hci0 command 0x1001 tx timeout

Je redémarre et je poste l'autre résultat...


- Linux Mint 18, HP 15-ay008nf, 4Gb, intel i3, SSD Samsung Evo 950 256Gb
- Linux Mint 17.03, PC by surcourf (CLEVO) 13,3'', SU2300, 2048 Go, GMA 4500HD

Hors ligne

#12 Le 17/03/2017, à 17:13

VinyMusic

Re : [Résolu] démarrage UEFI très long

Et la commande dmesg après un redémarrage (env 20 sec) :

vinymusic@vinymusic-HP-Notebook ~ $ dmesg
[    0.000000] Linux version 4.8.0-42-generic (buildd@lgw01-48) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #45~16.04.1-Ubuntu SMP Thu Mar 9 14:10:58 UTC 2017 (Ubuntu 4.8.0-42.45~16.04.1-generic 4.8.17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-42-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000086000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b88dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000009b88e000-0x000000009ba8dfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000009ba8e000-0x000000009cc8dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009cc8e000-0x000000009cf8dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cf8e000-0x000000009cffdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cffe000-0x000000009cffefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  SMBIOS=0x9be7f000  ESRT=0x9bf8b118  ACPI 2.0=0x9cffd014 
[    0.000000] esrt: Reserving ESRT space from 0x000000009bf8b118 to 0x000000009bf8b150.
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: HP HP Notebook/81EF, BIOS F.13 07/21/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x15f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
[    0.000000]   1 base 009CFFF000 mask 7FFFFFF000 uncachable
[    0.000000]   2 base 009D000000 mask 7FFF000000 uncachable
[    0.000000]   3 base 009E000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   5 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] total RAM covered: 6607M
[    0.000000]  gran_size: 64K 	chunk_size: 64K 	num_reg: 10  	lose cover RAM: 4194556K
[    0.000000]  gran_size: 64K 	chunk_size: 128K 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 256K 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 512K 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 1M 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 2M 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 32M 	num_reg: 8  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 256M 	num_reg: 6  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 512M 	num_reg: 6  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 64K 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 60K
[    0.000000]  gran_size: 128K 	chunk_size: 128K 	num_reg: 10  	lose cover RAM: 4194556K
[    0.000000]  gran_size: 128K 	chunk_size: 256K 	num_reg: 7  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 512K 	num_reg: 7  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 1M 	num_reg: 7  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 2M 	num_reg: 7  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 32M 	num_reg: 8  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 256M 	num_reg: 6  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 512M 	num_reg: 6  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 124K
[    0.000000]  gran_size: 128K 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 124K
[    0.000000]  gran_size: 256K 	chunk_size: 256K 	num_reg: 10  	lose cover RAM: 4194556K
[    0.000000]  gran_size: 256K 	chunk_size: 512K 	num_reg: 7  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 1M 	num_reg: 7  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 2M 	num_reg: 7  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 32M 	num_reg: 8  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 256M 	num_reg: 6  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 512M 	num_reg: 6  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 252K
[    0.000000]  gran_size: 256K 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 252K
[    0.000000]  gran_size: 512K 	chunk_size: 512K 	num_reg: 10  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 1M 	num_reg: 7  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 2M 	num_reg: 7  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 32M 	num_reg: 8  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 256M 	num_reg: 6  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 512M 	num_reg: 6  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 508K
[    0.000000]  gran_size: 512K 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 508K
[    0.000000]  gran_size: 1M 	chunk_size: 1M 	num_reg: 9  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 2M 	num_reg: 7  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 32M 	num_reg: 8  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 256M 	num_reg: 6  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 512M 	num_reg: 6  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 1020K
[    0.000000]  gran_size: 1M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 1020K
[    0.000000]  gran_size: 2M 	chunk_size: 2M 	num_reg: 8  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 32M 	num_reg: 8  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 256M 	num_reg: 6  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 512M 	num_reg: 6  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 2044K
[    0.000000]  gran_size: 2M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 2044K
[    0.000000]  gran_size: 4M 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 4092K
[    0.000000]  gran_size: 4M 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 4092K
[    0.000000]  gran_size: 4M 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 4092K
[    0.000000]  gran_size: 4M 	chunk_size: 32M 	num_reg: 8  	lose cover RAM: 4092K
[    0.000000]  gran_size: 4M 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 4092K
[    0.000000]  gran_size: 4M 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 4092K
[    0.000000]  gran_size: 4M 	chunk_size: 256M 	num_reg: 6  	lose cover RAM: 4092K
[    0.000000]  gran_size: 4M 	chunk_size: 512M 	num_reg: 6  	lose cover RAM: 4092K
[    0.000000]  gran_size: 4M 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 4092K
[    0.000000]  gran_size: 4M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 4092K
[    0.000000]  gran_size: 8M 	chunk_size: 8M 	num_reg: 6  	lose cover RAM: 8188K
[    0.000000]  gran_size: 8M 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 8188K
[    0.000000]  gran_size: 8M 	chunk_size: 32M 	num_reg: 8  	lose cover RAM: 8188K
[    0.000000]  gran_size: 8M 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 8188K
[    0.000000]  gran_size: 8M 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 8188K
[    0.000000]  gran_size: 8M 	chunk_size: 256M 	num_reg: 6  	lose cover RAM: 8188K
[    0.000000]  gran_size: 8M 	chunk_size: 512M 	num_reg: 6  	lose cover RAM: 8188K
[    0.000000]  gran_size: 8M 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 8188K
[    0.000000]  gran_size: 8M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 8188K
[    0.000000]  gran_size: 16M 	chunk_size: 16M 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 16M 	chunk_size: 32M 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 16M 	chunk_size: 64M 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 16M 	chunk_size: 128M 	num_reg: 4  	lose cover RAM: 16380K
[    0.000000]  gran_size: 16M 	chunk_size: 256M 	num_reg: 4  	lose cover RAM: 16380K
[    0.000000]  gran_size: 16M 	chunk_size: 512M 	num_reg: 4  	lose cover RAM: 16380K
[    0.000000]  gran_size: 16M 	chunk_size: 1G 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 16M 	chunk_size: 2G 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 32M 	chunk_size: 32M 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 32M 	chunk_size: 64M 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 32M 	chunk_size: 128M 	num_reg: 4  	lose cover RAM: 16380K
[    0.000000]  gran_size: 32M 	chunk_size: 256M 	num_reg: 4  	lose cover RAM: 16380K
[    0.000000]  gran_size: 32M 	chunk_size: 512M 	num_reg: 4  	lose cover RAM: 16380K
[    0.000000]  gran_size: 32M 	chunk_size: 1G 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 32M 	chunk_size: 2G 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 64M 	chunk_size: 64M 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 64M 	chunk_size: 128M 	num_reg: 4  	lose cover RAM: 16380K
[    0.000000]  gran_size: 64M 	chunk_size: 256M 	num_reg: 4  	lose cover RAM: 16380K
[    0.000000]  gran_size: 64M 	chunk_size: 512M 	num_reg: 4  	lose cover RAM: 16380K
[    0.000000]  gran_size: 64M 	chunk_size: 1G 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 64M 	chunk_size: 2G 	num_reg: 5  	lose cover RAM: 16380K
[    0.000000]  gran_size: 128M 	chunk_size: 128M 	num_reg: 4  	lose cover RAM: 81916K
[    0.000000]  gran_size: 128M 	chunk_size: 256M 	num_reg: 4  	lose cover RAM: 81916K
[    0.000000]  gran_size: 128M 	chunk_size: 512M 	num_reg: 4  	lose cover RAM: 81916K
[    0.000000]  gran_size: 128M 	chunk_size: 1G 	num_reg: 5  	lose cover RAM: 81916K
[    0.000000]  gran_size: 128M 	chunk_size: 2G 	num_reg: 5  	lose cover RAM: 81916K
[    0.000000]  gran_size: 256M 	chunk_size: 256M 	num_reg: 3  	lose cover RAM: 212988K
[    0.000000]  gran_size: 256M 	chunk_size: 512M 	num_reg: 4  	lose cover RAM: 212988K
[    0.000000]  gran_size: 256M 	chunk_size: 1G 	num_reg: 5  	lose cover RAM: 212988K
[    0.000000]  gran_size: 256M 	chunk_size: 2G 	num_reg: 5  	lose cover RAM: 212988K
[    0.000000]  gran_size: 512M 	chunk_size: 512M 	num_reg: 2  	lose cover RAM: 475132K
[    0.000000]  gran_size: 512M 	chunk_size: 1G 	num_reg: 2  	lose cover RAM: 475132K
[    0.000000]  gran_size: 512M 	chunk_size: 2G 	num_reg: 2  	lose cover RAM: 475132K
[    0.000000]  gran_size: 1G 	chunk_size: 1G 	num_reg: 2  	lose cover RAM: 475132K
[    0.000000]  gran_size: 1G 	chunk_size: 2G 	num_reg: 2  	lose cover RAM: 475132K
[    0.000000]  gran_size: 2G 	chunk_size: 2G 	num_reg: 2  	lose cover RAM: 475132K
[    0.000000] mtrr_cleanup: can not find optimal value
[    0.000000] please specify mtrr_gran_size/mtrr_chunk_size
[    0.000000] e820: update [mem 0x9cfff000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x9cfff max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff9aaa40080000] 80000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x15483b000, 0x15483bfff] PGTABLE
[    0.000000] BRK [0x15483c000, 0x15483cfff] PGTABLE
[    0.000000] BRK [0x15483d000, 0x15483dfff] PGTABLE
[    0.000000] BRK [0x15483e000, 0x15483efff] PGTABLE
[    0.000000] BRK [0x15483f000, 0x15483ffff] PGTABLE
[    0.000000] BRK [0x154840000, 0x154840fff] PGTABLE
[    0.000000] BRK [0x154841000, 0x154841fff] PGTABLE
[    0.000000] BRK [0x154842000, 0x154842fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32e7c000-0x35735fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000009CFFD014 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x000000009CFCB188 0000FC (v01 HPQOEM SLIC-MPC 00000001 HP   01000013)
[    0.000000] ACPI: FACP 0x000000009CFE6000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: DSDT 0x000000009CFD0000 01086A (v02 HPQOEM SLIC-MPC 00000000 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000009CF74000 000040
[    0.000000] ACPI: TCPA 0x000000009CFFC000 000032 (v02 HPQOEM INSYDE   00000000 HP   00040000)
[    0.000000] ACPI: UEFI 0x000000009CFFB000 000236 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: UEFI 0x000000009CFFA000 000042 (v01 HPQOEM INSYDE   00000000 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000009CFF9000 000496 (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFF8000 00004B (v02 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.000000] ACPI: TPM2 0x000000009CFF7000 000034 (v03 HPQOEM INSYDE   00000000 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000009CFF0000 006612 (v01 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000009CFEF000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000009CFEB000 003B2D (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000009CFEA000 0000A5 (v32 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: ASPT 0x000000009CFE9000 000034 (v07 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: BOOT 0x000000009CFE8000 000028 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: DBGP 0x000000009CFE7000 000034 (v01 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: HPET 0x000000009CFE5000 000038 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: LPIT 0x000000009CFE4000 000094 (v01 HPQOEM INSYDE   00000000 HP   00040000)
[    0.000000] ACPI: APIC 0x000000009CFE3000 00008C (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: MCFG 0x000000009CFE2000 00003C (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: WDAT 0x000000009CFE1000 000224 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000009CFCD000 002F87 (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFCC000 000C12 (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFCA000 000539 (v02 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFC9000 000B74 (v02 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFC3000 005F8D (v02 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x000000009CFC2000 0000A8 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: FPDT 0x000000009CFC1000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP   00040000)
[    0.000000] ACPI: BGRT 0x000000009CFC0000 000038 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000015effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x15effb000-0x15effffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000015effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x0000000000085fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000009b88dfff]
[    0.000000]   node   0: [mem 0x000000009cffe000-0x000000009cffefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000015effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000015effffff]
[    0.000000] On node 0 totalpages: 1026067
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 23 pages reserved
[    0.000000]   DMA zone: 3972 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9891 pages used for memmap
[    0.000000]   DMA32 zone: 632975 pages, LIFO batch:31
[    0.000000]   Normal zone: 6080 pages used for memmap
[    0.000000]   Normal zone: 389120 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000009e000000-0x000000009fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00086000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b88e000-0x9ba8dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x9ba8e000-0x9cc8dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cc8e000-0x9cf8dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cf8e000-0x9cffdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cfff000-0x9dffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff9aab9ec00000 s107864 r8192 d31400 u262144
[    0.000000] pcpu-alloc: s107864 r8192 d31400 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1010009
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-42-generic root=UUID=b89450b6-1064-484d-bb60-63f75604217c ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3864836K/4104268K available (8829K kernel code, 1441K rwdata, 3832K rodata, 1548K init, 1296K bss, 239432K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:760 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1995.213 MHz processor
[    0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.42 BogoMIPS (lpj=7980852)
[    0.000029] pid_max: default: 32768 minimum: 301
[    0.000040] ACPI: Core revision 20160422
[    0.029465] ACPI: 10 ACPI AML tables successfully acquired and loaded

[    0.030791] Security Framework initialized
[    0.030792] Yama: becoming mindful.
[    0.030810] AppArmor: AppArmor initialized
[    0.031073] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.031968] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.032384] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.032389] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.032683] CPU: Physical Processor ID: 0
[    0.032684] CPU: Processor Core ID: 0
[    0.032688] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.032689] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.032693] mce: CPU supports 7 MCE banks
[    0.032703] CPU0: Thermal monitoring enabled (TM1)
[    0.032717] process: using mwait in idle threads
[    0.032720] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.032720] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.033158] Freeing SMP alternatives memory: 32K (ffffffffb82ed000 - ffffffffb82f5000)
[    0.049092] ftrace: allocating 33450 entries in 131 pages
[    0.067037] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.067038] smpboot: Max logical packages: 4
[    0.067047] DMAR: Host address width 39
[    0.067048] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.067054] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[    0.067055] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.067061] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.067062] DMAR: RMRR base: 0x0000009cc63000 end: 0x0000009cc82fff
[    0.067063] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
[    0.067065] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.067066] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.067066] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.067067] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.067572] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.067573] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.068198] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.107886] TSC deadline timer enabled
[    0.107889] smpboot: CPU0: Intel(R) Core(TM) i3-5005U CPU @ 2.00GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[    0.107893] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.107942] ... version:                3
[    0.107942] ... bit width:              48
[    0.107943] ... generic registers:      4
[    0.107943] ... value mask:             0000ffffffffffff
[    0.107944] ... max period:             00007fffffffffff
[    0.107944] ... fixed-purpose events:   3
[    0.107945] ... event mask:             000000070000000f
[    0.109029] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.109116] x86: Booting SMP configuration:
[    0.109117] .... node  #0, CPUs:      #1 #2 #3
[    0.116895] x86: Booted up 1 node, 4 CPUs
[    0.116897] smpboot: Total of 4 processors activated (15961.70 BogoMIPS)
[    0.121358] devtmpfs: initialized
[    0.121421] x86/mm: Memory block size: 128MB
[    0.123572] evm: security.selinux
[    0.123572] evm: security.SMACK64
[    0.123573] evm: security.SMACK64EXEC
[    0.123573] evm: security.SMACK64TRANSMUTE
[    0.123574] evm: security.SMACK64MMAP
[    0.123574] evm: security.ima
[    0.123575] evm: security.capability
[    0.123636] PM: Registering ACPI NVS region [mem 0x9cc8e000-0x9cf8dfff] (3145728 bytes)
[    0.123743] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.123786] pinctrl core: initialized pinctrl subsystem
[    0.123885] RTC time: 16:10:08, date: 03/17/17
[    0.123981] NET: Registered protocol family 16
[    0.137074] cpuidle: using governor ladder
[    0.153090] cpuidle: using governor menu
[    0.153091] PCCT header not found.
[    0.153128] Simple Boot Flag at 0x44 set to 0x1
[    0.153137] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.153138] ACPI: bus type PCI registered
[    0.153140] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.153203] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.153205] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.153208] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.153525] PCI: Using configuration type 1 for base access
[    0.169236] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.169238] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.169495] ACPI: Added _OSI(Module Device)
[    0.169496] ACPI: Added _OSI(Processor Device)
[    0.169497] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.169498] ACPI: Added _OSI(Processor Aggregator Device)
[    0.170121] ACPI: Executed 15 blocks of module-level executable AML code
[    0.181412] ACPI: Dynamic OEM Table Load:
[    0.181424] ACPI: SSDT 0xFFFF9AAB993BDC00 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.182492] ACPI: Dynamic OEM Table Load:
[    0.182502] ACPI: SSDT 0xFFFF9AAB9913D800 0005AA (v02 PmRef  ApIst    00003000 INTL 20130117)
[    0.183617] ACPI: Dynamic OEM Table Load:
[    0.183625] ACPI: SSDT 0xFFFF9AAB993AF800 000119 (v02 PmRef  ApCst    00003000 INTL 20130117)
[    0.185616] ACPI : EC: EC started
[    0.186074] ACPI: Interpreter enabled
[    0.186117] ACPI: (supports S0 S3 S4 S5)
[    0.186119] ACPI: Using IOAPIC for interrupt routing
[    0.186153] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.330407] ACPI: Power Resource [FN00] (off)
[    0.330493] ACPI: Power Resource [FN01] (off)
[    0.330577] ACPI: Power Resource [FN02] (off)
[    0.330657] ACPI: Power Resource [FN03] (off)
[    0.330740] ACPI: Power Resource [FN04] (off)
[    0.331653] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.331659] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.331737] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.332498] PCI host bridge to bus 0000:00
[    0.332500] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.332502] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.332505] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.332506] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.332508] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.332509] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.332510] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.332511] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.332512] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.332513] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.332514] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.332515] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.332516] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.332517] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.332518] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.332519] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.332520] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window]
[    0.332522] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfe113fff window]
[    0.332523] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.332531] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.332823] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[    0.332835] pci 0000:00:02.0: reg 0x10: [mem 0xc2000000-0xc2ffffff 64bit]
[    0.332841] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.332846] pci 0000:00:02.0: reg 0x20: [io  0x6000-0x603f]
[    0.333156] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.333166] pci 0000:00:03.0: reg 0x10: [mem 0xc5218000-0xc521bfff 64bit]
[    0.333463] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
[    0.333475] pci 0000:00:04.0: reg 0x10: [mem 0xc5210000-0xc5217fff 64bit]
[    0.333781] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.333798] pci 0000:00:14.0: reg 0x10: [mem 0xc5200000-0xc520ffff 64bit]
[    0.333859] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.334101] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.334141] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.334158] pci 0000:00:16.0: reg 0x10: [mem 0xc5221000-0xc522101f 64bit]
[    0.334221] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.334521] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.334537] pci 0000:00:1b.0: reg 0x10: [mem 0xc521c000-0xc521ffff 64bit]
[    0.334598] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.334858] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.334899] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[    0.334964] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.335241] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.335281] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[    0.335348] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.335579] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.335621] pci 0000:00:1c.5: [8086:9c9a] type 01 class 0x060400
[    0.335693] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.335969] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.336015] pci 0000:00:1f.0: [8086:9cc5] type 00 class 0x060100
[    0.336384] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[    0.336397] pci 0000:00:1f.2: reg 0x10: [io  0x6088-0x608f]
[    0.336404] pci 0000:00:1f.2: reg 0x14: [io  0x6094-0x6097]
[    0.336410] pci 0000:00:1f.2: reg 0x18: [io  0x6080-0x6087]
[    0.336417] pci 0000:00:1f.2: reg 0x1c: [io  0x6090-0x6093]
[    0.336424] pci 0000:00:1f.2: reg 0x20: [io  0x6060-0x607f]
[    0.336431] pci 0000:00:1f.2: reg 0x24: [mem 0xc5224000-0xc52247ff]
[    0.336468] pci 0000:00:1f.2: PME# supported from D3hot
[    0.336726] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.336740] pci 0000:00:1f.3: reg 0x10: [mem 0xc5220000-0xc52200ff 64bit]
[    0.336759] pci 0000:00:1f.3: reg 0x20: [io  0x6040-0x605f]
[    0.337042] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[    0.337069] pci 0000:00:1f.6: reg 0x10: [mem 0xc5223000-0xc5223fff 64bit]
[    0.337476] pci 0000:00:1c.0: PCI bridge to [bus 01-06]
[    0.337479] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.337482] pci 0000:00:1c.0:   bridge window [mem 0xc6000000-0xc6ffffff]
[    0.337486] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[    0.337547] pci 0000:07:00.0: [10ec:8136] type 00 class 0x020000
[    0.337567] pci 0000:07:00.0: reg 0x10: [io  0x4000-0x40ff]
[    0.337595] pci 0000:07:00.0: reg 0x18: [mem 0xc5000000-0xc5000fff 64bit]
[    0.337613] pci 0000:07:00.0: reg 0x20: [mem 0xc5100000-0xc5103fff 64bit pref]
[    0.337708] pci 0000:07:00.0: supports D1 D2
[    0.337709] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.337767] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.353281] pci 0000:00:1c.2: PCI bridge to [bus 07-0c]
[    0.353283] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.353286] pci 0000:00:1c.2:   bridge window [mem 0xc4000000-0xc50fffff]
[    0.353291] pci 0000:00:1c.2:   bridge window [mem 0xc5100000-0xc51fffff 64bit pref]
[    0.353376] pci 0000:0d:00.0: [14e4:4365] type 00 class 0x028000
[    0.353402] pci 0000:0d:00.0: reg 0x10: [mem 0xc3000000-0xc3007fff 64bit]
[    0.353541] pci 0000:0d:00.0: supports D1 D2
[    0.353542] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[    0.353617] pci 0000:0d:00.0: System wakeup disabled by ACPI
[    0.365310] pci 0000:00:1c.5: PCI bridge to [bus 0d-12]
[    0.365313] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.365316] pci 0000:00:1c.5:   bridge window [mem 0xc3000000-0xc3ffffff]
[    0.365320] pci 0000:00:1c.5:   bridge window [mem 0xc1000000-0xc1ffffff 64bit pref]
[    0.429848] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.429901] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.429951] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.430000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.430048] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.430097] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.430145] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.430194] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.430730] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.431026] ACPI : EC: EC stopped
[    0.431057] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[    0.431057] ACPI : EC: EC started
[    0.431730] SCSI subsystem initialized
[    0.431772] libata version 3.00 loaded.
[    0.431808] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.431809] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.431811] vgaarb: loaded
[    0.431812] vgaarb: bridge control possible 0000:00:02.0
[    0.431832] ACPI: bus type USB registered
[    0.431849] usbcore: registered new interface driver usbfs
[    0.431858] usbcore: registered new interface driver hub
[    0.431877] usbcore: registered new device driver usb
[    0.469583] PCI: Using ACPI for IRQ routing
[    0.475564] PCI: pci_cache_line_size set to 64 bytes
[    0.475629] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.475630] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[    0.475631] e820: reserve RAM buffer [mem 0x9b88e000-0x9bffffff]
[    0.475632] e820: reserve RAM buffer [mem 0x9cfff000-0x9fffffff]
[    0.475633] e820: reserve RAM buffer [mem 0x15f000000-0x15fffffff]
[    0.475744] NetLabel: Initializing
[    0.475744] NetLabel:  domain hash size = 128
[    0.475745] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.475759] NetLabel:  unlabeled traffic allowed by default
[    0.475852] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.475857] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.477876] clocksource: Switched to clocksource hpet
[    0.485686] VFS: Disk quotas dquot_6.6.0
[    0.485705] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.485811] AppArmor: AppArmor Filesystem Enabled
[    0.485864] pnp: PnP ACPI init
[    0.486126] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.486130] system 00:00: [io  0xfd60-0xfd63] has been reserved
[    0.486132] system 00:00: [io  0xffff] has been reserved
[    0.486133] system 00:00: [io  0xffff] has been reserved
[    0.486134] system 00:00: [io  0xffff] has been reserved
[    0.486135] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.486137] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.486140] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.486199] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.486245] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.486247] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.486276] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.486304] pnp 00:04: Plug and Play ACPI device, IDs SYN3221 SYN1e00 SYN0002 PNP0f13 (active)
[    0.550335] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.550775] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.550777] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.550778] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.550780] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.550781] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.550782] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.550784] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.550785] system 00:06: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.550787] system 00:06: [mem 0xff000000-0xff000fff] has been reserved
[    0.550788] system 00:06: [mem 0xff010000-0xffffffff] could not be reserved
[    0.550790] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.550791] system 00:06: [mem 0xa0010000-0xa001ffff] has been reserved
[    0.550793] system 00:06: [mem 0xa0000000-0xa000ffff] has been reserved
[    0.550795] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.551099] pnp: PnP ACPI: found 7 devices
[    0.557287] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.557313] pci 0000:00:1c.0: PCI bridge to [bus 01-06]
[    0.557315] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.557320] pci 0000:00:1c.0:   bridge window [mem 0xc6000000-0xc6ffffff]
[    0.557323] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[    0.557328] pci 0000:00:1c.2: PCI bridge to [bus 07-0c]
[    0.557330] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.557334] pci 0000:00:1c.2:   bridge window [mem 0xc4000000-0xc50fffff]
[    0.557337] pci 0000:00:1c.2:   bridge window [mem 0xc5100000-0xc51fffff 64bit pref]
[    0.557342] pci 0000:00:1c.5: PCI bridge to [bus 0d-12]
[    0.557344] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.557348] pci 0000:00:1c.5:   bridge window [mem 0xc3000000-0xc3ffffff]
[    0.557351] pci 0000:00:1c.5:   bridge window [mem 0xc1000000-0xc1ffffff 64bit pref]
[    0.557357] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.557359] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.557360] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.557361] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.557363] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.557364] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.557365] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.557366] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.557367] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.557369] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.557370] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.557371] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.557372] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.557373] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.557374] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.557375] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.557377] pci_bus 0000:00: resource 20 [mem 0xa0000000-0xdfffffff window]
[    0.557378] pci_bus 0000:00: resource 21 [mem 0xfe000000-0xfe113fff window]
[    0.557379] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.557380] pci_bus 0000:01: resource 1 [mem 0xc6000000-0xc6ffffff]
[    0.557381] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref]
[    0.557383] pci_bus 0000:07: resource 0 [io  0x4000-0x4fff]
[    0.557384] pci_bus 0000:07: resource 1 [mem 0xc4000000-0xc50fffff]
[    0.557385] pci_bus 0000:07: resource 2 [mem 0xc5100000-0xc51fffff 64bit pref]
[    0.557386] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
[    0.557387] pci_bus 0000:0d: resource 1 [mem 0xc3000000-0xc3ffffff]
[    0.557388] pci_bus 0000:0d: resource 2 [mem 0xc1000000-0xc1ffffff 64bit pref]
[    0.557423] NET: Registered protocol family 2
[    0.557595] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.557661] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.557755] TCP: Hash tables configured (established 32768 bind 32768)
[    0.557780] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.557796] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.557849] NET: Registered protocol family 1
[    0.557860] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.557959] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.557960] pci 0000:00:14.0: PCI INT A: not connected
[    0.559286] PCI: CLS 64 bytes, default 64
[    0.559332] Unpacking initramfs...
[    1.324043] Freeing initrd memory: 41704K (ffff9aaa72e7c000 - ffff9aaa75736000)
[    1.324082] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.324085] software IO TLB [mem 0x973d4000-0x9b3d4000] (64MB) mapped at [ffff9aaad73d4000-ffff9aaadb3d3fff]
[    1.324313] Scanning for low memory corruption every 60 seconds
[    1.324675] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.324713] audit: initializing netlink subsys (disabled)
[    1.324728] audit: type=2000 audit(1489767009.304:1): initialized
[    1.325184] Initialise system trusted keyrings
[    1.325263] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.326906] zbud: loaded
[    1.327344] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.327539] fuse init (API version 7.25)
[    1.327670] Allocating IMA blacklist keyring.
[    1.328737] Key type asymmetric registered
[    1.328738] Asymmetric key parser 'x509' registered
[    1.328786] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.328816] io scheduler noop registered
[    1.328817] io scheduler deadline registered (default)
[    1.328825] io scheduler cfq registered
[    1.329336] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.329340] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.329377] efifb: probing for efifb
[    1.329396] efifb: framebuffer at 0xb0000000, using 4160k, total 4160k
[    1.329397] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    1.329398] efifb: scrolling: redraw
[    1.329399] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.329499] Console: switching to colour frame buffer device 170x48
[    1.329515] fb0: EFI VGA frame buffer device
[    1.329522] intel_idle: MWAIT substates: 0x11142120
[    1.329523] intel_idle: v0.4.1 model 0x3D
[    1.329751] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.329825] ACPI: AC Adapter [ACAD] (off-line)
[    1.329904] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C0D:00/input/input0
[    1.329924] ACPI: Lid Switch [LID0]
[    1.329981] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.329983] ACPI: Power Button [PWRB]
[    1.330023] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.330025] ACPI: Power Button [PWRF]
[    1.330082] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECWT] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.330087] ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node ffff9aab9a106f28), AE_NOT_FOUND (20160422/psparse-542)
[    1.330095] acpi PNP0C0B:00: Failed to change power state to D0
[    1.330121] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECWT] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.330124] ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node ffff9aab9a106f28), AE_NOT_FOUND (20160422/psparse-542)
[    1.330129] acpi PNP0C0B:00: Failed to set initial power state
[    1.349956] acpi PNP0C0B:00: Cannot transition from (unknown) to D3hot
[    1.350575] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.350580] ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffff9aab9a106d70), AE_NOT_FOUND (20160422/psparse-542)
[    1.350674] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.350677] ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffff9aab9a106d70), AE_NOT_FOUND (20160422/psparse-542)
[    1.350724] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.350727] ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff9aab9a1065f0), AE_NOT_FOUND (20160422/psparse-542)
[    1.350766] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.350769] ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff9aab9a1065f0), AE_NOT_FOUND (20160422/psparse-542)
[    1.350866] thermal LNXTHERM:02: registered as thermal_zone0
[    1.350867] ACPI: Thermal Zone [TZ02] (28 C)
[    1.350919] GHES: HEST is not enabled!
[    1.351020] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.470001] ACPI: Battery Slot [BAT1] (battery present)
[    1.470264] Linux agpgart interface v0.103
[    1.472298] loop: module loaded
[    1.472487] libphy: Fixed MDIO Bus: probed
[    1.472488] tun: Universal TUN/TAP device driver, 1.6
[    1.472488] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.472518] PPP generic driver version 2.4.2
[    1.472560] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.472562] ehci-pci: EHCI PCI platform driver
[    1.472573] ehci-platform: EHCI generic platform driver
[    1.472582] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.472584] ohci-pci: OHCI PCI platform driver
[    1.472592] ohci-platform: OHCI generic platform driver
[    1.472600] uhci_hcd: USB Universal Host Controller Interface driver
[    1.472717] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.472718] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    1.472741] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.472746] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.473814] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[    1.473819] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.473905] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.473906] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.473907] usb usb1: Product: xHCI Host Controller
[    1.473908] usb usb1: Manufacturer: Linux 4.8.0-42-generic xhci-hcd
[    1.473909] usb usb1: SerialNumber: 0000:00:14.0
[    1.474034] hub 1-0:1.0: USB hub found
[    1.474045] hub 1-0:1.0: 11 ports detected
[    1.475546] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.475550] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.475576] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.475578] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.475579] usb usb2: Product: xHCI Host Controller
[    1.475580] usb usb2: Manufacturer: Linux 4.8.0-42-generic xhci-hcd
[    1.475581] usb usb2: SerialNumber: 0000:00:14.0
[    1.475677] hub 2-0:1.0: USB hub found
[    1.475684] hub 2-0:1.0: 4 ports detected
[    1.476080] usb: port power management may be unreliable
[    1.476296] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.503514] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.503518] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.503687] mousedev: PS/2 mouse device common for all mice
[    1.503912] rtc_cmos 00:01: RTC can wake from S4
[    1.504054] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.504080] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.504086] i2c /dev entries driver
[    1.504139] device-mapper: uevent: version 1.0.3
[    1.504202] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    1.504210] intel_pstate: Intel P-state driver initializing
[    1.504378] ledtrig-cpu: registered to indicate activity on CPUs
[    1.504380] EFI Variables Facility v0.08 2004-May-17
[    1.516180] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.544663] NET: Registered protocol family 10
[    1.544876] NET: Registered protocol family 17
[    1.544882] Key type dns_resolver registered
[    1.545084] microcode: sig=0x306d4, pf=0x40, revision=0x22
[    1.545164] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.545376] registered taskstats version 1
[    1.545379] Loading compiled-in X.509 certificates
[    1.549155] Loaded X.509 cert 'Build time autogenerated kernel key: 636a06f854df4b3e5c70b0d6b1ef5516b00d0858'
[    1.549174] zswap: loaded using pool lzo/zbud
[    1.566921] Key type big_key registered
[    1.569587] Key type trusted registered
[    1.572251] Key type encrypted registered
[    1.572254] AppArmor: AppArmor sha1 policy hashing enabled
[    1.572256] ima: No TPM chip found, activating TPM-bypass!
[    1.572278] evm: HMAC attrs: 0x1
[    1.572832]   Magic number: 9:571:186
[    1.572873] thermal LNXTHERM:02: hash matches
[    1.572882] acpi device:45: hash matches
[    1.572948] rtc_cmos 00:01: setting system clock to 2017-03-17 16:10:09 UTC (1489767009)
[    1.573029] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.573030] EDD information not available.
[    1.573087] PM: Hibernation image not present or could not be loaded.
[    1.574411] Freeing unused kernel memory: 1548K (ffffffffb816a000 - ffffffffb82ed000)
[    1.574412] Write protecting the kernel read-only data: 14336k
[    1.574856] Freeing unused kernel memory: 1396K (ffff9aab93ea3000 - ffff9aab94000000)
[    1.575562] Freeing unused kernel memory: 264K (ffff9aab943be000 - ffff9aab94400000)
[    1.584609] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.598464] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.598548] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.598559] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.598574] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.598655] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.598684] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.599936] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.599988] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.600002] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.600402] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.626916] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.628530] sdhci: Secure Digital Host Controller Interface driver
[    1.628530] sdhci: Copyright(c) Pierre Ossman
[    1.631365] hidraw: raw HID events driver (C) Jiri Kosina
[    1.645167] wmi: Mapper loaded
[    1.651984] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.651994] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.652513] r8169 0000:07:00.0 eth0: RTL8106e at 0xffffaf51407da000, ec:8e:b5:0c:6e:a5, XID 04900000 IRQ 43
[    1.654766] ahci 0000:00:1f.2: version 3.0
[    1.656225] [drm] Initialized drm 1.1.0 20060810
[    1.665081] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.665084] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.667540] scsi host0: ahci
[    1.669412] scsi host1: ahci
[    1.669511] ata1: SATA max UDMA/133 abar m2048@0xc5224000 port 0xc5224100 irq 44
[    1.669513] ata2: SATA max UDMA/133 abar m2048@0xc5224000 port 0xc5224180 irq 44
[    1.686732] r8169 0000:07:00.0 enp7s0: renamed from eth0
[    1.689958] [drm] Memory usable by graphics device = 4096M
[    1.689960] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[    1.689961] fb: switching to inteldrmfb from EFI VGA
[    1.689998] Console: switching to colour dummy device 80x25
[    1.690087] [drm] Replacing VGA console driver
[    1.696068] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.696069] [drm] Driver supports precise vblank timestamp query.
[    1.698534] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.753526] random: fast init done
[    1.801999] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    1.813331] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.814404] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    1.814486] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
[    1.860893] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
[    1.943604] usb 1-2: New USB device found, idVendor=3938, idProduct=1031
[    1.943606] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.943608] usb 1-2: Product: 2.4G Wireless Mouse
[    1.943610] usb 1-2: Manufacturer: MOSART Semi.
[    1.948850] usbcore: registered new interface driver usbhid
[    1.948851] usbhid: USB HID core driver
[    1.951044] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:3938:1031.0001/input/input7
[    1.951236] hid-generic 0003:3938:1031.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:00:14.0-2/input0
[    1.965290] fbcon: inteldrmfb (fb0) is primary device
[    1.965386] Console: switching to colour frame buffer device 170x48
[    1.965412] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.984409] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.984428] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.986035] ata1.00: supports DRM functions and may not be fully accessible
[    1.986641] ata1.00: disabling queued TRIM support
[    1.986642] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
[    1.986644] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.987202] ata2.00: ATAPI: hp       DVDRW  GUD0N, PD00, max UDMA/133
[    1.987315] ata1.00: supports DRM functions and may not be fully accessible
[    1.987879] ata1.00: disabling queued TRIM support
[    1.988222] ata1.00: configured for UDMA/133
[    1.988520] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
[    1.990650] ata2.00: configured for UDMA/133
[    2.018259] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    2.018272] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.018325] sd 0:0:0:0: [sda] Write Protect is off
[    2.018328] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.018350] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.019799]  sda: sda1 sda2 sda3
[    2.020103] scsi 1:0:0:0: CD-ROM            hp       DVDRW  GUD0N     PD00 PQ: 0 ANSI: 5
[    2.020136] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.045614] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.045616] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.045809] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.045894] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.062038] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[    2.204422] usb 1-4: New USB device found, idVendor=0a5c, idProduct=216d
[    2.204425] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.204426] usb 1-4: Product: BCM43142A0
[    2.204427] usb 1-4: Manufacturer: Broadcom Corp
[    2.204428] usb 1-4: SerialNumber: 441CA8ADBCB0
[    2.322048] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[    2.346044] tsc: Refined TSC clocksource calibration: 1995.380 MHz
[    2.346049] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39864456686, max_idle_ns: 881590680204 ns
[    2.349327] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
[    2.372941] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
[    2.402300] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
[    2.459697] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3127, fw id: 8526786
[    2.496396] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.501445] usb 1-5: New USB device found, idVendor=05c8, idProduct=038f
[    2.501447] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.501448] usb 1-5: Product: HP TrueVision HD
[    2.501449] usb 1-5: Manufacturer: Generic
[    2.501450] usb 1-5: SerialNumber: 200901010001
[    2.618061] raid6: sse2x1   gen()  6161 MB/s
[    2.686070] raid6: sse2x1   xor()  4577 MB/s
[    2.754075] raid6: sse2x2   gen()  7505 MB/s
[    2.822082] raid6: sse2x2   xor()  4969 MB/s
[    2.890086] raid6: sse2x4   gen()  8758 MB/s
[    2.958089] raid6: sse2x4   xor()  6194 MB/s
[    3.026097] raid6: avx2x1   gen() 11943 MB/s
[    3.094098] raid6: avx2x2   gen() 14020 MB/s
[    3.162104] raid6: avx2x4   gen() 15825 MB/s
[    3.162105] raid6: using algorithm avx2x4 gen() 15825 MB/s
[    3.162106] raid6: using avx2x2 recovery algorithm
[    3.163422] xor: automatically using best checksumming function: avx
[    3.180476] Btrfs loaded, crc32c=crc32c-intel
[    3.370326] clocksource: Switched to clocksource tsc
[    8.273507] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    8.448593] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    8.448741] systemd[1]: Detected architecture x86-64.
[    8.448914] systemd[1]: Set hostname to <vinymusic-HP-Notebook>.
[    8.518946] systemd[1]: Listening on Journal Audit Socket.
[    8.519010] systemd[1]: Reached target Remote File Systems (Pre).
[    8.519047] systemd[1]: Listening on Syslog Socket.
[    8.519082] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    8.519120] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.519153] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.519186] systemd[1]: Listening on LVM2 poll daemon socket.
[    8.562524] lp: driver loaded but no devices found
[    8.567402] ppdev: user-space parallel port driver
[    8.637325] random: crng init done
[    8.650236] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    8.662591] systemd-journald[345]: Received request to flush runtime journal from PID 1
[    8.765243] Initializing HPQ6001 module
[    8.765316] input: HP Wireless hotkeys as /devices/virtual/input/input8
[    8.848497] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.903808] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    8.930784] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    8.930787] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.930790] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    8.930792] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    8.930793] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    8.930796] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x19
[    8.930798] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[    8.933389] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[    8.933512] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[    8.933626] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[    8.963105] wl: loading out-of-tree module taints kernel.
[    8.963110] wl: module license 'MIXED/Proprietary' taints kernel.
[    8.963112] Disabling lock debugging due to kernel taint
[    8.969767] wl: module verification failed: signature and/or required key missing - tainting kernel
[    8.971226] media: Linux media interface: v0.10
[    8.971906] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    8.971907] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    8.971909] RAPL PMU: hw unit of domain package 2^-14 Joules
[    8.971910] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    8.971911] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    8.990894] Linux video capture interface: v2.00
[    9.011331] AVX2 version of gcm_enc/dec engaged.
[    9.011333] AES CTR mode by8 optimization enabled
[    9.016871] Bluetooth: Core ver 2.21
[    9.016885] NET: Registered protocol family 31
[    9.016887] Bluetooth: HCI device and connection manager initialized
[    9.016890] Bluetooth: HCI socket layer initialized
[    9.016893] Bluetooth: L2CAP socket layer initialized
[    9.016900] Bluetooth: SCO socket layer initialized
[    9.051079] uvcvideo: Found UVC 1.00 device HP TrueVision HD (05c8:038f)
[    9.056383] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[    9.056387] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[    9.056389] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[    9.056490] input: HP TrueVision HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input12
[    9.056557] usbcore: registered new interface driver uvcvideo
[    9.056558] USB Video Class driver (1.1.1)
[    9.091936] kvm: disabled by bios
[    9.104358] usbcore: registered new interface driver btusb
[    9.104478] wlan0: Broadcom BCM4365 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
[    9.108492] intel_rapl: Found RAPL domain package
[    9.108495] intel_rapl: Found RAPL domain core
[    9.108497] intel_rapl: Found RAPL domain uncore
[    9.108499] intel_rapl: Found RAPL domain dram
[    9.108503] intel_rapl: RAPL package 0 domain package locked by BIOS
[    9.108517] intel_rapl: RAPL package 0 domain dram locked by BIOS
[    9.131098] Adding 4104188k swap on /dev/sda3.  Priority:-1 extents:1 across:4104188k SSFS
[    9.205447] wl 0000:0d:00.0 wlp13s0: renamed from wlan0
[    9.215545] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[    9.215643] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[    9.332854] zram: Added device: zram0
[    9.340229] zram: Added device: zram1
[    9.347998] zram: Added device: zram2
[    9.353043] zram: Added device: zram3
[    9.367816] cgroup: new mount options do not match the existing superblock, will be ignored
[    9.372688] zram0: detected capacity change from 0 to 506331136
[    9.400370] Adding 494460k swap on /dev/zram0.  Priority:5 extents:1 across:494460k SSFS
[    9.401156] zram1: detected capacity change from 0 to 506331136
[    9.407320] Adding 494460k swap on /dev/zram1.  Priority:5 extents:1 across:494460k SSFS
[    9.409175] zram2: detected capacity change from 0 to 506331136
[    9.416790] Adding 494460k swap on /dev/zram2.  Priority:5 extents:1 across:494460k SSFS
[    9.417557] zram3: detected capacity change from 0 to 506331136
[    9.425696] Adding 494460k swap on /dev/zram3.  Priority:5 extents:1 across:494460k SSFS
[    9.649981] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[    9.658878] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[    9.843844] r8169 0000:07:00.0 enp7s0: link down
[    9.843900] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[    9.905396] input: HP WMI hotkeys as /devices/virtual/input/input13
[   11.046821] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.046823] Bluetooth: BNEP filters: protocol multicast
[   11.046828] Bluetooth: BNEP socket layer initialized
[   11.114772] Bluetooth: hci0 command 0x1001 tx timeout
[   19.179363] Bluetooth: hci0: BCM: Reading local version info failed (-110)
[   19.184378] Bluetooth: hci0: BCM: chip id 70
[   19.200347] Bluetooth: hci0: BCM43142A
[   19.200351] Bluetooth: hci0: BCM (001.001.011) build 0000
[   19.694382] Bluetooth: hci0: BCM (001.001.011) build 0227
[   19.710461] Bluetooth: hci0: Broadcom 43142 Bluetooth 4.0 Adapter

Que de lignes !!! J'espère que tu sauras y trouver de nouvelles pistes...


- Linux Mint 18, HP 15-ay008nf, 4Gb, intel i3, SSD Samsung Evo 950 256Gb
- Linux Mint 17.03, PC by surcourf (CLEVO) 13,3'', SU2300, 2048 Go, GMA 4500HD

Hors ligne

#13 Le 17/03/2017, à 17:40

malbo

Re : [Résolu] démarrage UEFI très long

Les dmesg du post #11 et #12 sont quasiment identiques sauf vers la fin : dans le dmesg du post #11 (dmesg après un démarrage), on voit deux lignes "hci0 command 0x1001 tx timeout". Il y a peut-être un souci avec le Bluetooth mais je ne suis pas assez compétent pour affirmer quoi que ce soit en la matière. Et il est possible que le souci soit encore ailleurs.

Hors ligne

#14 Le 17/03/2017, à 17:45

VinyMusic

Re : [Résolu] démarrage UEFI très long

En effet, comme dit précédemment, le bluetooth est intermittent (mais je ne l'utilise pas...)
Merci en tous cas pour cette longue lecture !


- Linux Mint 18, HP 15-ay008nf, 4Gb, intel i3, SSD Samsung Evo 950 256Gb
- Linux Mint 17.03, PC by surcourf (CLEVO) 13,3'', SU2300, 2048 Go, GMA 4500HD

Hors ligne

#15 Le 17/03/2017, à 17:51

malbo

Re : [Résolu] démarrage UEFI très long

En fait, ces deux résultats (post #11 et post #12) ce sont environ les 20 premières secondes du démarrage. Et c'est peut-être normal qu'on n'y trouve rien de particulier parce que c'est après ces 20 premières secondes qu'il doit y avoir quelque chose qui traîne (dans le cas du démarrage). Il faudrait qu'un plus compétent que moi se penche sur le pb.

Hors ligne

#16 Le 17/03/2017, à 17:56

VinyMusic

Re : [Résolu] démarrage UEFI très long

Dans tous les cas, merci pour ton soutien... En espérant que mon problème pourra intéresser quelqu'un parce que pour le moment, le sujet n'a pas trouvé bcp d'écho...


- Linux Mint 18, HP 15-ay008nf, 4Gb, intel i3, SSD Samsung Evo 950 256Gb
- Linux Mint 17.03, PC by surcourf (CLEVO) 13,3'', SU2300, 2048 Go, GMA 4500HD

Hors ligne

#17 Le 18/03/2017, à 07:18

malbo

Re : [Résolu] démarrage UEFI très long

Bonjour,
Je me rends compte que je t'ai fait partir sur une fausse piste. Ton souci, tu l'avais bien exposé dans le post #8 et si je l'avais mieux compris, je t'aurais évité ça. Ton problème, c'est que le menu Grub apparaît au bout de 30 secondes quand tu fais un démarrage (alors qu'il apparaît instantanément lors d'un redémarrage), c'est donc du côté du paramétrage de ton système UEFI qu'il faut chercher.
Je te prie de presser la touche F9 au démarrage de ton ordi pour faire apparaître le menu de démarrage du système UEFI. Sélectionne l'entrée "ubuntu" pour que l'ordi démarre dessus et dis-nous si le menu Grub s'affiche immédiatement ou bien s'il faut attendre 30 secondes.

Dernière modification par malbo (Le 18/03/2017, à 07:21)

Hors ligne

#18 Le 18/03/2017, à 10:16

Laurent85

Re : [Résolu] démarrage UEFI très long

Pourquoi la partition efi est commentée et du coup non montée dans le fstab ?

# /boot/efi was on /dev/sda1 during installation
#UUID=B629-DC91  /boot/efi       vfat    umask=0077      0       1

C'est quoi ces zram, tu fais quoi avec et c'est configuré comment ?

/dev/zram0: UUID="47c072e0-2c08-4d4d-b8c8-f72de5044175" TYPE="swap"
/dev/zram1: UUID="0049de1f-d19f-4b6f-8afa-2168a6ed51aa" TYPE="swap"
/dev/zram2: UUID="cdd6c2c3-5a66-4e6e-9edb-6f116e791c92" TYPE="swap"
/dev/zram3: UUID="9660e165-4547-4954-bc68-dc27f6d997c8" TYPE="swap"

Ouvre un terminal pour générer un rapport bisnext, donne le lien c'est la première ligne du rapport :

sudo apt update 
sudo apt install gawk mesa-utils pastebinit smartmontools --no-install-recommends
wget https://github.com/laurent85v/bisnext/raw/master/bisnext
sudo bash bisnext --pastebin

Hors ligne

#19 Le 18/03/2017, à 12:22

malbo

Re : [Résolu] démarrage UEFI très long

@Laurent85 : Le fstab complet extrait du Boot-Info est là :

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=b89450b6-1064-484d-bb60-63f75604217c /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
#UUID=B629-DC91  /boot/efi       vfat    umask=0077      0       1
# swap was on /dev/sda3 during installation
UUID=322674ba-3c58-42da-9bb9-7599b23a36ed none            swap    sw              0       0




UUID=B629-DC91	/boot/efi	vfat	defaults	0	1
--------------------------------------------------------------------------------

La ligne de montage de /boot/efi est précédée de lignes vides, ce qui est inhabituel et piégeant. C'est la trace dégueu laissée par Boot-Repair quand il fait une réparation du démarrage : il commente toujours la ligne d'origine de montage de la partition EFI et il crée sa ligne de montage à lui, avec une option de montage différente (mais ça revient peut-être au même) : "defaults" au lieu de "umask=0077"

Dernière modification par malbo (Le 18/03/2017, à 12:29)

Hors ligne

#20 Le 18/03/2017, à 12:37

Laurent85

Re : [Résolu] démarrage UEFI très long

@malbo ah oui j'avais pas vu, la partition efi est effectivement montée au démarrage, l'option umask d'origine c'est pour limiter l'accès au superutilisateur root, c'est préférable, boot-repair devrait mettre à jour son code, l'option defaults c'était avant et ça a été changé pour des raisons de sécurité.

Dernière modification par Laurent85 (Le 18/03/2017, à 12:41)

Hors ligne

#21 Le 18/03/2017, à 12:49

Bougron

Re : [Résolu] démarrage UEFI très long

malbo a écrit :

Bonjour,
Je me rends compte que je t'ai fait partir sur une fausse piste. Ton souci, tu l'avais bien exposé dans le post #8 et si je l'avais mieux compris, je t'aurais évité ça. Ton problème, c'est que le menu Grub apparaît au bout de 30 secondes quand tu fais un démarrage (alors qu'il apparaît instantanément lors d'un redémarrage), c'est donc du côté du paramétrage de ton système UEFI qu'il faut chercher.
Je te prie de presser la touche F9 au démarrage de ton ordi pour faire apparaître le menu de démarrage du système UEFI. Sélectionne l'entrée "ubuntu" pour que l'ordi démarre dessus et dis-nous si le menu Grub s'affiche immédiatement ou bien s'il faut attendre 30 secondes.

Je me suis fais aussi piéger.   J'ai donc supprimé les demandes des  fins des fichiers /var/log/kerm.log et /var/log/syslog

Certains bios EFI se comportent de cette façon lorsqu'on alterne les OS de boot
   Dans un cas , ils lisent directement les lignes de boot présentes dans la NVRAN , Dans un autres, ils inspectent le contenu des périphériques  pour mettre a jour la NVRAM
Ce qui est surprenant, c'est le fait que ce problème survienne après la mise à jour 16.04.2

Si je comprends bien c'est l'équivalent du fast-boot qu'il faut regarder dans le bios
Dans un cas, il y a le firmware à recharger et pas dans l'autre.
Mais, Peut-être que le firmware est rechargé ( par SHIM ?) alors que ce n'est pas nécessaire.... https://plus.google.com/102106074332414 … ooDdEo1ns9

Ou tout simplement un gros problème de chargement du firwmare . Dans mon contexte

u16042@u16042:~$ systemd-analyze
Startup finished in 4.670s (firmware) + 12.817s (loader) + 8.063s (kernel) + 59.592s (userspace) = 1min 25.143s
u16042@u16042:~$
u16042@u16042:~$ uname -a
Linux u16042 4.8.0-36-generic #36~16.04.1-Ubuntu SMP Sun Feb 5 09:39:57 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
u16042@u16042:~$ 

Dernière modification par Bougron (Le 18/03/2017, à 13:23)


Ubuntu  BASH 16.04.1 sous windows 10
Lubuntu 14.04.4 en 32 bits pour un vaio pcg-k215s
Ubuntu 16.04.2 avec le noyau 4.4.0-64 et  avec le noyau 4.8.0.36
Un site que les débutants en ubuntu doivent consulter  http://ubuntu.i17.fr/

Hors ligne

#22 Le 19/03/2017, à 15:20

VinyMusic

Re : [Résolu] démarrage UEFI très long

Me voilà, me voilà ! (excusez-moi, je suis de retour après 24h de musique... sans ordi mais avec trompettes et tubas !)
Cool, de nouvelles pistes de recherche !
- @ Malbo : après appui sur la touche F9 et après avoir sélectionné Ubuntu, affichage de Grub au bout de 5-6 sec.
- @ Laurent85 : voici le rapport bisnext ici (et merci à toi de te pencher à ton tour sur la question...)


- Linux Mint 18, HP 15-ay008nf, 4Gb, intel i3, SSD Samsung Evo 950 256Gb
- Linux Mint 17.03, PC by surcourf (CLEVO) 13,3'', SU2300, 2048 Go, GMA 4500HD

Hors ligne

#23 Le 19/03/2017, à 15:51

Laurent85

Re : [Résolu] démarrage UEFI très long

Je ne vois rien d'anormal, et que donne la commande :

sudo systemd-analyze blame | head -25

Dernière modification par Laurent85 (Le 19/03/2017, à 15:51)

Hors ligne

#24 Le 19/03/2017, à 15:54

VinyMusic

Re : [Résolu] démarrage UEFI très long

vinymusic@vinymusic-HP-Notebook ~ $ sudo systemd-analyze blame | head -25
[sudo] Mot de passe de vinymusic : 
           552ms dev-sda2.device
           378ms lvm2-monitor.service
           322ms networking.service
           305ms accounts-daemon.service
           304ms ModemManager.service
           249ms loadcpufreq.service
           246ms systemd-logind.service
           209ms plymouth-quit.service
           209ms plymouth-quit-wait.service
           193ms irqbalance.service
           190ms console-setup.service
           184ms grub-common.service
           178ms ondemand.service
           173ms speech-dispatcher.service
           171ms virtualbox-guest-utils.service
           169ms NetworkManager.service
           165ms hddtemp.service
           150ms zram-config.service
           148ms gpu-manager.service
           144ms systemd-fsck@dev-disk-by\x2duuid-B629\x2dDC91.service
           118ms systemd-udev-trigger.service
           102ms lm-sensors.service
            93ms systemd-rfkill.service
            92ms alsa-restore.service
            89ms console-kit-log-system-start.service

Voici le résultat de la commande... en espérant trouver une nouvelle piste...


- Linux Mint 18, HP 15-ay008nf, 4Gb, intel i3, SSD Samsung Evo 950 256Gb
- Linux Mint 17.03, PC by surcourf (CLEVO) 13,3'', SU2300, 2048 Go, GMA 4500HD

Hors ligne

#25 Le 19/03/2017, à 16:17

Laurent85

Re : [Résolu] démarrage UEFI très long

ras, peut-être une piste avec la commande :

sudo systemd-analyze critical-chain

Hors ligne