#1 Le 04/04/2017, à 09:37
- michcauch
[RÉSOLU] Démarrage impossible après changement de noyau
Bonjour,
Hier j'ai mis à jour mon PC fixe (voir signature) sous Ubuntu 16.04.
Le noyau a été mis à jour vers une version dont je n'ai pas noté le numéro. Depuis il ne démarre plus du tout et le grub est inaccessible.
J'ai lancé une version live, et fait un boot info que voici
boot-info
Avant que je me lance dans une réinstallation, pourriez-vous me dire si ce problème de démarrage peut-être résolu ?
D'avance merci.
Dernière modification par michcauch (Le 06/04/2017, à 08:57)
Cordialement
Michel
___
Ubuntu 22.04 sur Clevo N141WU
Hors ligne
#2 Le 04/04/2017, à 13:21
- michcauch
Re : [RÉSOLU] Démarrage impossible après changement de noyau
Petite relance en précisant le message apparaissant quand je démarre le PC en appuyant sur la touche Echap pour atteindre le menu du grub :
GNU GRUB version 2.02~beta2-36ubuntu3.8
Édition de ligne basique de type Bash possible.
en appuyant sur tab on obtient une liste de commandes utilisables, beaucoup bien obscures pour moi,
sauf la commande ls qui renvoie
(hd0) (hd0,gpt3) (hd0,gpt2) (hd0,gpt1) (hd1) (hd1,msdos3) (hd1,msdos2) (hd1,msdos1) (hd2) erreur : échec de lecture du secteur 0xfc de « hd2 ».
erreur : échec de lecture du secteur 0xe0 de « hd2 ».
erreur : échec de lecture du secteur 0x0 de « hd2 ».
(lvm/xubuntu- -vg-swap_1) (lvm/xubuntu- -vg-root)
Cordialement
Michel
___
Ubuntu 22.04 sur Clevo N141WU
Hors ligne
#3 Le 04/04/2017, à 18:43
- michcauch
Re : [RÉSOLU] Démarrage impossible après changement de noyau
Personne n'a une petite idée pour m'aider ?
D'avance merci.
Cordialement
Michel
___
Ubuntu 22.04 sur Clevo N141WU
Hors ligne
#4 Le 04/04/2017, à 18:57
- michcauch
Re : [RÉSOLU] Démarrage impossible après changement de noyau
J'ai parcouru le boot info, c'est bien compliqué pour moi. J'en ai retiré ceci (c'est à la fin)
Suggested repair
The default repair of the Boot-Repair utility would purge (in order to sign-grub enable-raid enable-lvm) and reinstall the grub-efi-amd64-signed of mapper/xubuntu--vg-root, using the following options: sda2/boot, sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file rename-ms-efi
=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sda (120GB) disk!
=================== User settings
The settings chosen by the user will not act on the boot.
Je comprends globalement ce qui est dit et j'imagine que cela doit donner des pistes, moi je n'en vois qu'une : utiliser boot-repair en appliquant une réparation par défaut.
Est-ce la bonne méthode ?
Cordialement
Michel
___
Ubuntu 22.04 sur Clevo N141WU
Hors ligne
#5 Le 04/04/2017, à 19:13
- Bougron
Re : [RÉSOLU] Démarrage impossible après changement de noyau
Bonjour.
Essaies de redemarrer avec un ancien noyau.
Tu choisis la seconde ligne (advanced) au lieu de la premiere
Puis tu choisis un noyau qui n'est pas en tête de liste.
Hors ligne
#6 Le 04/04/2017, à 19:24
- michcauch
Re : [RÉSOLU] Démarrage impossible après changement de noyau
Merci pour ta réponse, mais je ne peux pas accéder au menu du grub et donc démarrer sur un autre noyau.
En fait, au lieu du menu grub j'ai une fenêtre de type tty1 avec une invite de commande similaire à cela
GRUB>
et en appuyant sur tab j'ai une série de commandes que je peux activer dans cette fenêtre comme ls (cf message 4).
Cordialement
Michel
___
Ubuntu 22.04 sur Clevo N141WU
Hors ligne
#7 Le 04/04/2017, à 19:33
- Bougron
Re : [RÉSOLU] Démarrage impossible après changement de noyau
tu peux tenter la reparation standard de boot-repair .... Tu verras bien...
Hors ligne
#8 Le 04/04/2017, à 21:16
- michcauch
Re : [RÉSOLU] Démarrage impossible après changement de noyau
La réparation ne donne rien,
j'arrive maintenant sur un menu grub étonnant qui contient les 4 lignes
EFI/ubuntu/fwupx64.efi
EFI/ubuntu/Mok.Manager.efi
efi/EFI/ubuntu/fwupx64.efi
efi/EFI/ubuntu/Mok.Manager.efi
je peux valider ce que je veux et rien ne se passe.
J'ai fait un autre boot info que voici
Merci pour ton aide
Rajout : en fin d'action du boot-repair j'ai ceci dans le terminal
E:Sub-process/usr/bin/dpkg returned a error (1)
Dernière modification par michcauch (Le 04/04/2017, à 21:18)
Cordialement
Michel
___
Ubuntu 22.04 sur Clevo N141WU
Hors ligne
#9 Le 04/04/2017, à 23:22
- Bougron
Re : [RÉSOLU] Démarrage impossible après changement de noyau
Essaies la solution E de cette discussion.
https://forum.ubuntu-fr.org/viewtopic.php?id=1994634
car ta mise à jour ne s'est pas terminée et elle n'a pas mis les fichiers de boot et boot-repair ne les a pas récupéré.
si elle ne marche pas, le plus simple sera de tout réinstaller. car il est possible qu'il manque plus de choses que cela.
PS: Je n'ai pa pu prendre connaissance de ton dernier boot-info.
Dernière modification par Bougron (Le 04/04/2017, à 23:24)
Hors ligne
#10 Le 05/04/2017, à 10:04
- michcauch
Re : [RÉSOLU] Démarrage impossible après changement de noyau
Merci,
j'essaye la solution E, voici les résultats des deux premières commandes conseillées :
ubuntu@ubuntu:~$ sudo blkid
/dev/sda1: UUID="9F73-DEE6" TYPE="vfat" PARTUUID="170fd7e2-46c8-457e-b985-ca493ed91669"
/dev/sda2: UUID="df1c7129-1190-48b9-bab8-fc083c013fc1" TYPE="ext2" PARTUUID="d4b74556-f0d8-4332-a62f-a8d68ef2a429"
/dev/sdb1: LABEL="disque-fabienne" UUID="c1b960d1-84f7-4704-b68c-ff7a59ec5b35" TYPE="ext4" PARTUUID="55181b76-01"
/dev/sdb2: LABEL="disque-michel" UUID="3e0d7a69-6ef3-457c-9120-0a7810961b1b" TYPE="ext4" PARTUUID="55181b76-02"
/dev/sdb3: LABEL="medias" UUID="4ec19949-14a9-4b5a-a094-c13e41b118b2" TYPE="ext4" PARTUUID="55181b76-03"
/dev/sdc1: UUID="A90A-DCF0" TYPE="vfat" PARTUUID="000b7005-01"
/dev/loop0: TYPE="squashfs"
/dev/sda3: UUID="uUWufi-vA0y-t6CM-0VRo-Gb9x-0ldk-QpFMlw" TYPE="LVM2_member" PARTUUID="df491aa9-47a0-4ac4-8fee-c18edc3defaa"
/dev/mapper/xubuntu--vg-root: UUID="c162bf9e-2a0a-4736-8387-a5dc93f186e9" TYPE="ext4"
/dev/mapper/xubuntu--vg-swap_1: UUID="9969fde7-0455-40ab-b00f-2b1a31f984c9" TYPE="swap"
/dev/sde1: UUID="7F71-5C89" TYPE="vfat" PARTUUID="000d80e6-01"
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/loop0: 1.3 GiB, 1433468928 bytes, 2799744 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 951A3A7E-1AC4-4C0C-BD86-A6D72041C93E
Device Start End Sectors Size Type
/dev/sda1 2048 1050623 1048576 512M EFI System
/dev/sda2 1050624 2050047 999424 488M Linux filesystem
/dev/sda3 2050048 234440703 232390656 110.8G Linux LVM
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x55181b76
Device Boot Start End Sectors Size Id Type
/dev/sdb1 2048 409602047 409600000 195.3G 83 Linux
/dev/sdb2 409602048 819202047 409600000 195.3G 83 Linux
/dev/sdb3 819202048 1953523711 1134321664 540.9G 83 Linux
Disk /dev/sdc: 14.9 GiB, 16026435072 bytes, 31301631 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x000b7005
Device Boot Start End Sectors Size Id Type
/dev/sdc1 * 2048 31299583 31297536 14.9G c W95 FAT32 (LBA)
Disk /dev/mapper/xubuntu--vg-root: 106.9 GiB, 114798100480 bytes, 224215040 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/mapper/xubuntu--vg-swap_1: 3.9 GiB, 4181721088 bytes, 8167424 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/sde: 3.8 GiB, 4026531840 bytes, 7864320 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x000d80e6
Device Boot Start End Sectors Size Id Type
/dev/sde1 2048 7864319 7862272 3.8G b W95 FAT32
avant tout j'ai besoin d'une confirmation : le le N° de partition de la directory / est-ce bien sde1 ? (sur le SSD de 120 Mb)
Note : le SSD contient le système et le home (en fait les homes de Fabienne et Michel) ainsi qu'une partition swap, le DD sda2 de 500 Gb partitionné en sb1 à 3 contient les datas. Par contre je ne vois pas ce qu'est sda1 et sda3.
Question : est-il normal d'avoir sda1 en ext2 et sb1 à 3 en ext4 ?
Enfin voici la réponse à sudo fsck -fv /dev/sde1, elle m'inquiéte :
ubuntu@ubuntu:~$ sudo fsck -fv /dev/sde1
fsck from util-linux 2.27.1
fsck.fat 3.0.28 (2015-05-16)
Checking we can access the last sector of the filesystem
0x41: Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.
1) Remove dirty bit
2) No action
Que faire ? merci d'avance.
Rajout : voici le boot info http://paste2.org/0gAkxjVW
Dernière modification par michcauch (Le 05/04/2017, à 10:08)
Cordialement
Michel
___
Ubuntu 22.04 sur Clevo N141WU
Hors ligne
#11 Le 05/04/2017, à 10:39
- Bougron
Re : [RÉSOLU] Démarrage impossible après changement de noyau
Bonjour
Quelques réponses
1) La partition EFI de boot n'est pas SDE1 mais SDA1 sur le SSD de 120 Go
Disk /dev/sda: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 951A3A7E-1AC4-4C0C-BD86-A6D72041C93E
Device Start End Sectors Size Type
/dev/sda1 2048 1050623 1048576 512M EFI System
SDE1 est ta clé USB.. Si elle a un dirty bit, on peut le faire sauter sans aucun risque pour y accéder en écriture, C'est juste la preuve qu'elle été mal démontée lors de sa création.
Disk /dev/sde: 3.8 GiB, 4026531840 bytes, 7864320 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x000d80e6
Device Boot Start End Sectors Size Id Type
/dev/sde1 2048 7864319 7862272 3.8G b W95 FAT32
Mais plus grave, je réalise que ce que je viens te demander de faire est inadapté à ton cas
====> Il va manquer le montage du logiciel de décryptage des partitions MAPPER. et je ne le maîtrise pas bien....
Regardes cette discussion, pour voir comment insérer les deux commandes que j'ai oubliées avant de lancer la commande fsck des partitions
https://forum.ubuntu-fr.org/viewtopic.p … #p21638343
Dernière modification par Bougron (Le 05/04/2017, à 10:43)
Hors ligne
#12 Le 05/04/2017, à 13:35
- michcauch
Re : [RÉSOLU] Démarrage impossible après changement de noyau
Cela n'a pas l'air concluant, voici ce que j'obtiens
ubuntu@ubuntu:~$ sudo vgchange -ay
2 logical volume(s) in volume group "xubuntu-vg" now active
ubuntu@ubuntu:~$ sudo fsck -fyvC0 /dev/mapper/ubuntu--vg-root
fsck from util-linux 2.27.1
e2fsck 1.42.13 (17-May-2015)
fsck.ext2: No such file or directory while trying to open /dev/mapper/ubuntu--vg-root
Possibly non-existent device?
Cordialement
Michel
___
Ubuntu 22.04 sur Clevo N141WU
Hors ligne
#13 Le 05/04/2017, à 13:41
- Bougron
Re : [RÉSOLU] Démarrage impossible après changement de noyau
Comme je te l'ai dis , je ne connais pas bien...
Peux-tu donner le résultat de
sudo fdisk -l
sudo cryptsetup luksOpen /dev/sda3 sda3_crypt
sudo vgchange -ay
Hors ligne
#14 Le 05/04/2017, à 14:28
- michcauch
Re : [RÉSOLU] Démarrage impossible après changement de noyau
sudo fdisk -l
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/loop0: 1.3 GiB, 1433468928 bytes, 2799744 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 951A3A7E-1AC4-4C0C-BD86-A6D72041C93E
Device Start End Sectors Size Type
/dev/sda1 2048 1050623 1048576 512M EFI System
/dev/sda2 1050624 2050047 999424 488M Linux filesystem
/dev/sda3 2050048 234440703 232390656 110.8G Linux LVM
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x55181b76
Device Boot Start End Sectors Size Id Type
/dev/sdb1 2048 409602047 409600000 195.3G 83 Linux
/dev/sdb2 409602048 819202047 409600000 195.3G 83 Linux
/dev/sdb3 819202048 1953523711 1134321664 540.9G 83 Linux
Disk /dev/sdc: 14.9 GiB, 16026435072 bytes, 31301631 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x000b7005
Device Boot Start End Sectors Size Id Type
/dev/sdc1 * 2048 31299583 31297536 14.9G c W95 FAT32 (LBA)
Disk /dev/sdd: 3.8 GiB, 4026531840 bytes, 7864320 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x000d80e6
Device Boot Start End Sectors Size Id Type
/dev/sdd1 2048 7864319 7862272 3.8G b W95 FAT32
Disk /dev/mapper/xubuntu--vg-root: 106.9 GiB, 114798100480 bytes, 224215040 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/mapper/xubuntu--vg-swap_1: 3.9 GiB, 4181721088 bytes, 8167424 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 byte
ubuntu@ubuntu:~$ sudo cryptsetup luksOpen /dev/sda3 sda3_crypt
Device /dev/sda3 is not a valid LUKS device.
ubuntu@ubuntu:~$ sudo vgchange -ay
2 logical volume(s) in volume group "xubuntu-vg" now active
Sinon j'ai examiné les partitions du SSD via l'utilitaire de disque de Ubuntu, voici ce que cela donne :
Size 537 MB — 523 MB free (2.5% full)
Device /dev/sda1
Partition type EFI System
Contents FAT (32-bit version) — Mounted at /mnt/boot-sav/mapper/xubuntu--vg-root/boot/efi
Size 512 MB — 2.9 MB free (99.4% full)
Device /dev/sda2
Partition type Linux Filesystem
Contents Ext2 (version 1.0) — Mounted at /mnt/boot-sav/mapper/xubuntu--vg-root/boot
Size 119 GB (118,984,015,872 bytes)
Device /dev/sda3
Partition type Linux LVM
Contents LVM2 Physical Volume (LVM2 001)
le sda2 est saturé, si c'est lui qui contient le système, on comprend que la mise à jour est les tentatives de réparations échouent.
J'ai tenté de réutiliser boot-repair pour réinstaller le noyau, boot repair me propose de lancer une commande dans un terminal et voila ce que cela donne (d'abord la réponse complète puis l'extrait qui m'alerte) :
ubuntu@ubuntu:~$ sudo chroot "/mnt/boot-sav/mapper/xubuntu--vg-root" apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following packages were automatically installed and are no longer required:
linux-headers-4.4.0-62 linux-headers-4.4.0-62-generic linux-headers-4.4.0-63
linux-headers-4.4.0-63-generic linux-headers-4.4.0-65
linux-headers-4.4.0-65-generic linux-headers-4.4.0-66
linux-headers-4.4.0-66-generic linux-headers-4.4.0-71
linux-headers-4.4.0-71-generic linux-headers-4.8.0-36
linux-headers-4.8.0-36-generic linux-headers-4.8.0-39
linux-headers-4.8.0-39-generic linux-image-4.4.0-62-generic
linux-image-4.4.0-63-generic linux-image-4.4.0-65-generic
linux-image-4.4.0-66-generic linux-image-4.4.0-71-generic
linux-image-4.8.0-36-generic linux-image-4.8.0-39-generic
linux-image-extra-4.4.0-62-generic linux-image-extra-4.4.0-63-generic
linux-image-extra-4.4.0-65-generic linux-image-extra-4.4.0-66-generic
linux-image-extra-4.4.0-71-generic linux-image-extra-4.8.0-36-generic
linux-image-extra-4.8.0-39-generic
Use 'sudo apt autoremove' to remove them.
The following additional packages will be installed:
linux-image-4.4.0-72-generic
Suggested packages:
fdutils linux-doc-4.4.0 | linux-source-4.4.0 linux-tools
The following NEW packages will be installed:
linux-image-4.4.0-72-generic
0 upgraded, 1 newly installed, 0 to remove and 6 not upgraded.
21 not fully installed or removed.
Need to get 0 B/21.8 MB of archives.
After this operation, 66.4 MB of additional disk space will be used.
Do you want to continue? [Y/n]
(Reading database ... 548079 files and directories currently installed.)
Preparing to unpack .../linux-image-4.4.0-72-generic_4.4.0-72.93_amd64.deb ...
Examining /etc/kernel/preinst.d/
run-parts: executing /etc/kernel/preinst.d/intel-microcode 4.4.0-72-generic /boot/vmlinuz-4.4.0-72-generic
Done.
Unpacking linux-image-4.4.0-72-generic (4.4.0-72.93) ...
dpkg: error processing archive /var/cache/apt/archives/linux-image-4.4.0-72-generic_4.4.0-72.93_amd64.deb (--unpack):
cannot copy extracted data for './boot/vmlinuz-4.4.0-72-generic' to '/boot/vmlinuz-4.4.0-72-generic.dpkg-new': failed to write (No space left on device)
No apport report written because the error message indicates a disk full error
dpkg-deb: error: subprocess paste was killed by signal (Broken pipe)
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.4.0-72-generic /boot/vmlinuz-4.4.0-72-generic
Errors were encountered while processing:
/var/cache/apt/archives/linux-image-4.4.0-72-generic_4.4.0-72.93_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
dont, tiré de ce qui précède
dpkg: error processing archive /var/cache/apt/archives/linux-image-4.4.0-72-generic_4.4.0-72.93_amd64.deb (--unpack):
cannot copy extracted data for './boot/vmlinuz-4.4.0-72-generic' to '/boot/vmlinuz-4.4.0-72-generic.dpkg-new': failed to write (No space left on device)
No apport report written because the error message indicates a disk full error
dpkg-deb: error: subprocess paste was killed by signal (Broken pipe)
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.4.0-72-generic /boot/vmlinuz-4.4.0-72-generic
Errors were encountered while processing:
/var/cache/apt/archives/linux-image-4.4.0-72-generic_4.4.0-72.93_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Encore merci pour ton aide
Cordialement
Michel
___
Ubuntu 22.04 sur Clevo N141WU
Hors ligne
#15 Le 05/04/2017, à 14:41
- Bougron
Re : [RÉSOLU] Démarrage impossible après changement de noyau
avant de lancer ta commande de finalisation d'installation
sudo chroot "/mnt/boot-sav/mapper/xubuntu--vg-root" apt-get -f install
Tentes de récupérer de l'espace par cette méthode
sudo chroot "/mnt/boot-sav/mapper/xubuntu--vg-root"
dpkg --remove --force-remove-reinstreq linux-image-4.4.0-72-generic
dpkg --remove --force-remove-reinstreq linux-image-extra-4.4.0-72-generic
apt autoremove
apt-get -f install
C'est idiot, j'aurais du voir qu'il n'y avait plus de place dans la partition /boot par le boot-info car c'est du classique.
=================== df -Th:
/dev/mapper/xubuntu--vg-root ext4 106G 29G 72G 29% /media/ubuntu/c162bf9e-2a0a-4736-8387-a5dc93f186e9
/dev/sda1 vfat 511M 3.6M 508M 1% /mnt/boot-sav/sda1
/dev/sda2 ext2 473M 461M 0 100% /mnt/boot-sav/sda2
puis tu devrais pouvoir booter et commencer une épuration sérieuse en faisant la commande
sudo apt autoremove
et enfin installer le logiciel kclean pour gratter ce qui aura été oublié https://forum.ubuntu-fr.org/viewtopic.php?id=242358
======================================
Si la récupération d'espace n'est pas possible, On va faire brutal.
1) Tu bootes en live-usb et tu choisis "essayer avant d'installer" et tu mets le clavier en français
setxkbmap fr #### certainement à écrire setxkb,qp fr
2) Tu montes la partition de boot
sudo mount /dev/sda2 /mnt
3) Tu listes son contenu
ls -ls /mnt/boot
4) Tu supprimes quelques fichiers les plus anciens et les plus gros. Je pense à ces deux commandes
sudo rm /mnt/boot/vmlinuz-4.4.0-63*
sudo rm /mnt/boot/vmlinuz-4.4.0-65*
5) Tu pourras alors recommencer la réinstallation du noyau avec boot-repair
Dernière modification par Bougron (Le 05/04/2017, à 16:32)
Hors ligne
#16 Le 05/04/2017, à 15:39
- Bougron
Re : [RÉSOLU] Démarrage impossible après changement de noyau
Cela n'a pas l'air concluant, voici ce que j'obtiens
ubuntu@ubuntu:~$ sudo vgchange -ay 2 logical volume(s) in volume group "xubuntu-vg" now active ubuntu@ubuntu:~$ sudo fsck -fyvC0 /dev/mapper/ubuntu--vg-root fsck from util-linux 2.27.1 e2fsck 1.42.13 (17-May-2015) fsck.ext2: No such file or directory while trying to open /dev/mapper/ubuntu--vg-root Possibly non-existent device?
La codif était un peu différente
sudo fsck -fyvC0 /dev/mapper/xubuntu--vg-root
Dernière modification par Bougron (Le 05/04/2017, à 15:39)
Hors ligne
#17 Le 05/04/2017, à 18:11
- michcauch
Re : [RÉSOLU] Démarrage impossible après changement de noyau
J'essaye tout ça dans la soirée.
Pour ton dernier message il est vrai que je n'avais pas précisé que le pc est sous xubuntu.
Désolé, voici le retour :
ubuntu@ubuntu:~$ sudo fsck -fyvC0 /dev/mapper/xubuntu--vg-root
fsck from util-linux 2.27.1
e2fsck 1.42.13 (17-May-2015)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
687370 inodes used (9.80%, out of 7012352)
402 non-contiguous files (0.1%)
553 non-contiguous directories (0.1%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 615664/156
8726791 blocks used (31.14%, out of 28026880)
0 bad blocks
2 large files
516460 regular files
93501 directories
55 character device files
25 block device files
0 fifos
2547 links
77317 symbolic links (71459 fast symbolic links)
3 sockets
------------
689908 files
Cordialement
Michel
___
Ubuntu 22.04 sur Clevo N141WU
Hors ligne
#18 Le 05/04/2017, à 18:58
- michcauch
Re : [RÉSOLU] Démarrage impossible après changement de noyau
En fait rien ne marche
ubuntu@ubuntu:~$ sudo chroot "/mnt/boot-sav/mapper/xubuntu--vg-root"
chroot: failed to run command ‘/bin/bash’: No such file or directory
quelque soit la commande j'ai une erreur du même type
ubuntu@ubuntu:~$ ls -ls /mnt/boot
ls: cannot access '/mnt/boot': No such file or directory
ou
ubuntu@ubuntu:~$ sudo rm /mnt/boot/vmlinuz-4.4.0-63*
rm: cannot remove '/mnt/boot/vmlinuz-4.4.0-63*': No such file or directory
En fait (je rappelle que je fonctionne en live-USB) si j'ouvre le dossier mnt du SSD, il est vide, de même pour le dossier boot.
Je crois qu'il va me falloir faire une réinstallation.
Cordialement
Michel
___
Ubuntu 22.04 sur Clevo N141WU
Hors ligne
#19 Le 05/04/2017, à 19:46
- Bougron
Re : [RÉSOLU] Démarrage impossible après changement de noyau
Tu suis a la lettre s'il te plaît
======================================
On va faire brutal.
1) Tu bootes en live-usb et tu choisis "essayer avant d'installer" et tu mets le clavier en français
setxkbmap fr #### certainement à écrire setxkb,qp fr
2) Tu montes la partition de boot dans le répertoire /mnt de la live USB
sudo umount /dev/sda2
sudo mount /dev/sda2 /mnt
3) Tu listes son contenu
ls -ls /mnt/boot
4) Tu supprimes quelques fichiers les plus anciens et les plus gros. Je pense à ces deux commandes
sudo rm /mnt/boot/vmlinuz-4.4.0-63*
sudo rm /mnt/boot/vmlinuz-4.4.0-65*
5) Tu pourras alors recommencer la réinstallation du noyau avec boot-repair
Dernière modification par Bougron (Le 05/04/2017, à 20:59)
Hors ligne
#20 Le 05/04/2017, à 20:09
- michcauch
Re : [RÉSOLU] Démarrage impossible après changement de noyau
Je fais mon possible pour suivre tes conseils avec précision mais
ubuntu@ubuntu:~$ sudo mount /dev/sda2 /mnt
mount: /dev/sda2 is already mounted or /mnt busy
/dev/sda2 is already mounted on /mnt
ubuntu@ubuntu:~$ ls -ls /mnt/boot
ls: cannot access '/mnt/boot': No such file or directory
Cordialement
Michel
___
Ubuntu 22.04 sur Clevo N141WU
Hors ligne
#21 Le 05/04/2017, à 21:00
- Bougron
Re : [RÉSOLU] Démarrage impossible après changement de noyau
Peux-tu recommencer, J'ai ajouté une commande au tout début
Hors ligne
#22 Le 05/04/2017, à 21:26
- michcauch
Re : [RÉSOLU] Démarrage impossible après changement de noyau
Merci pour ta persévérance. Voici les résultats
ubuntu@ubuntu:~$ sudo umount /dev/sda2
ubuntu@ubuntu:~$ sudo mount /dev/sda2 /mnt
ubuntu@ubuntu:~$ ls -ls /mnt/boot
ls: cannot access '/mnt/boot': No such file or directory
par contre
ubuntu@ubuntu:~$ ls -ls /mnt
total 467642
1221 -rw-r--r-- 1 root root 1244118 Jan 18 15:59 abi-4.4.0-62-generic
1223 -rw-r--r-- 1 root root 1245512 Feb 1 19:39 abi-4.4.0-63-generic
1223 -rw-r--r-- 1 root root 1245659 Feb 23 20:00 abi-4.4.0-65-generic
1223 -rw-r--r-- 1 root root 1245512 Mar 3 18:25 abi-4.4.0-66-generic
1223 -rw-r--r-- 1 root root 1245659 Mar 24 15:20 abi-4.4.0-71-generic
1382 -rw-r--r-- 1 root root 1407843 Feb 5 11:32 abi-4.8.0-36-generic
1383 -rw-r--r-- 1 root root 1408261 Feb 20 18:42 abi-4.8.0-39-generic
1383 -rw-r--r-- 1 root root 1408261 Mar 3 19:03 abi-4.8.0-41-generic
1383 -rw-r--r-- 1 root root 1408375 Mar 24 15:05 abi-4.8.0-45-generic
187 -rw-r--r-- 1 root root 190047 Jan 18 15:59 config-4.4.0-62-generic
187 -rw-r--r-- 1 root root 190247 Feb 1 19:39 config-4.4.0-63-generic
187 -rw-r--r-- 1 root root 190236 Feb 23 20:00 config-4.4.0-65-generic
187 -rw-r--r-- 1 root root 190247 Mar 3 18:25 config-4.4.0-66-generic
187 -rw-r--r-- 1 root root 190236 Mar 24 15:20 config-4.4.0-71-generic
196 -rw-r--r-- 1 root root 199575 Feb 5 11:32 config-4.8.0-36-generic
196 -rw-r--r-- 1 root root 199575 Feb 20 18:42 config-4.8.0-39-generic
196 -rw-r--r-- 1 root root 199575 Mar 3 19:03 config-4.8.0-41-generic
196 -rw-r--r-- 1 root root 199564 Mar 24 15:05 config-4.8.0-45-generic
1 drwxrwxr-x 2 root root 1024 Sep 27 2016 efi
1 drwxr-xr-x 5 root root 1024 Apr 4 18:22 grub
1 drwxr-xr-x 5 root root 1024 Apr 4 18:19 grub.bak
38429 -rw-r--r-- 1 root root 39195666 Feb 14 09:36 initrd.img-4.4.0-62-generic
38418 -rw-r--r-- 1 root root 39185190 Feb 20 09:24 initrd.img-4.4.0-63-generic
38427 -rw-r--r-- 1 root root 39194291 Mar 2 16:15 initrd.img-4.4.0-65-generic
38420 -rw-r--r-- 1 root root 39186459 Mar 11 17:49 initrd.img-4.4.0-66-generic
38546 -rw-r--r-- 1 root root 39315470 Apr 4 18:19 initrd.img-4.4.0-71-generic
40760 -rw-r--r-- 1 root root 41574202 Feb 21 15:13 initrd.img-4.8.0-36-generic
40748 -rw-r--r-- 1 root root 41561914 Feb 24 01:30 initrd.img-4.8.0-39-generic
40741 -rw-r--r-- 1 root root 41554467 Mar 11 17:49 initrd.img-4.8.0-41-generic
40862 -rw-r--r-- 1 root root 41678815 Apr 4 18:19 initrd.img-4.8.0-45-generic
12 drwx------ 2 root root 12288 Sep 27 2016 lost+found
180 -rw-r--r-- 1 root root 182704 Jan 28 2016 memtest86+.bin
182 -rw-r--r-- 1 root root 184380 Jan 28 2016 memtest86+.elf
182 -rw-r--r-- 1 root root 184840 Jan 28 2016 memtest86+_multiboot.bin
3801 -rw------- 1 root root 3875553 Jan 18 15:59 System.map-4.4.0-62-generic
3809 -rw------- 1 root root 3883990 Feb 1 19:39 System.map-4.4.0-63-generic
3808 -rw------- 1 root root 3882407 Feb 23 20:00 System.map-4.4.0-65-generic
3809 -rw------- 1 root root 3883990 Mar 3 18:25 System.map-4.4.0-66-generic
3808 -rw------- 1 root root 3882277 Mar 24 15:20 System.map-4.4.0-71-generic
3983 -rw------- 1 root root 4060748 Feb 5 11:32 System.map-4.8.0-36-generic
3990 -rw------- 1 root root 4067758 Feb 20 18:42 System.map-4.8.0-39-generic
3990 -rw------- 1 root root 4067758 Mar 3 19:03 System.map-4.8.0-41-generic
3988 -rw------- 1 root root 4066103 Mar 24 15:05 System.map-4.8.0-45-generic
6934 -rw------- 1 root root 7070992 Jan 18 15:59 vmlinuz-4.4.0-62-generic
6949 -rw------- 1 root root 7087088 Feb 1 19:39 vmlinuz-4.4.0-63-generic
6945 -rw------- 1 root root 7082608 Feb 23 20:00 vmlinuz-4.4.0-65-generic
6949 -rw------- 1 root root 7087024 Mar 3 18:25 vmlinuz-4.4.0-66-generic
6946 -rw------- 1 root root 7083344 Mar 24 15:20 vmlinuz-4.4.0-71-generic
7156 -rw------- 1 root root 7297312 Feb 5 11:32 vmlinuz-4.8.0-36-generic
7170 -rw------- 1 root root 7311872 Feb 20 18:42 vmlinuz-4.8.0-39-generic
7170 -rw------- 1 root root 7311872 Mar 3 19:03 vmlinuz-4.8.0-41-generic
7164 -rw------- 1 root root 7305888 Mar 24 15:05 vmlinuz-4.8.0-45-generic
J'imagine que je peux faire du vide dans tout cela.
J'imagine qu'il n'y a pas /boot dans /mnt donc dans /dev/sda2
Cordialement
Michel
___
Ubuntu 22.04 sur Clevo N141WU
Hors ligne
#23 Le 06/04/2017, à 06:48
- Bougron
Re : [RÉSOLU] Démarrage impossible après changement de noyau
bonjour
En fait c'est normal que cela se présente sans /boot car la partition est elle-même nommée /boot
Oui, un peu de suppression sur le numeros se terminant par 63 et 65 devrait suffire.
Dernière modification par Bougron (Le 06/04/2017, à 06:49)
Hors ligne
#24 Le 06/04/2017, à 08:42
- michcauch
Re : [RÉSOLU] Démarrage impossible après changement de noyau
Voila, c'est fait. je vais rebooter.
le boot-info : http://paste2.org/BmxZ02en
Cordialement
Michel
___
Ubuntu 22.04 sur Clevo N141WU
Hors ligne
#25 Le 06/04/2017, à 08:56
- michcauch
Re : [RÉSOLU] Démarrage impossible après changement de noyau
Problème résolu, merci mille fois Bougron d'avoir eu la patience (et quelle patience !) de m'aider.
Par-contre ce que je ne comprends pas c'est que j'utilise régulièrement kclean et que le nombre de fichiers noyaux présents étaient bien trop importants.
Je viens de le lancer, le remplissage de sda2 n'est plus que de 27%.
Donc problème totalement résolu.
Merci encore, doublement merci.
Cordialement
Michel
___
Ubuntu 22.04 sur Clevo N141WU
Hors ligne