Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 17/07/2017, à 13:48

seiyadu

logiciel pour modifier la vitesse

je voudrais s'il y a un logiciel capable de modifier la vitesse des ventilateurs sur pc portable ?

Hors ligne

#2 Le 17/07/2017, à 13:51

deobs

Re : logiciel pour modifier la vitesse

salut,
as-tu regardé du cote de fancontrol


Un débutant bidouillant peu son système.
Distrib: Debian Stretch_64bits
Config: Laptop IdeaPad P500 Touch

Hors ligne

#3 Le 17/07/2017, à 14:16

seiyadu

Re : logiciel pour modifier la vitesse

bonjour j'obtiens ca avec la commande sudo pwmconfig

donovan@donovan:~$ sudo pwmconfig
# pwmconfig revision 6243 (2014-03-20)
This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.

We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.

/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed

Modération : merci à l'avenir d'utiliser les balises code (explications ici).

Dernière modification par cqfd93 (Le 17/07/2017, à 16:44)

Hors ligne

#4 Le 17/07/2017, à 16:09

deobs

Re : logiciel pour modifier la vitesse

recherche sur le web a écrit :

it87 is one of the most common sensor module

Essaye donc de le charger:

sudo modprobe it87

avec sensors-detect tu peux déterminer les modules dont tu as besoin pour avoir les infos de tes capteurs
sinon j'ai trouvé ca sur ubuntu forum, ca date de 2012 ceci dit et je sais pas si ca concerne ton materiel

Hi guys,

came across this and thought I'd share it.

If you are using a PWM capable motherboard with the IT87 module and
you want to use fancontrol ...

If you can't load the it87 module - most likely your kernel needs
GRUB_CMDLINE_LINUX="acpi_enforce_resources=lax"    ### n'enleve pas les parametres deja present !
as kernel argument. Add it to your boot loader for example.   ### /!\ oublis pas de mettre a jour grub si tu le modifie /!\
Then try
modprobe it87
lsmod | grep it87 --> make sure it's loaded
sensors-detect
save configuration, then run
sensors
to make sure everything loads properly.

Then try
pwmconfig
if pwmconfig gives you:

There are no pwm-capable sensor modules installed

You can get it working by loading the it87 module with the command:

modprobe it87 fix_pwm_polarity=1

pwmconfig should work as expected.

Je suis pas capable de t'aider plus ca.

Dernière modification par deobs (Le 17/07/2017, à 16:12)


Un débutant bidouillant peu son système.
Distrib: Debian Stretch_64bits
Config: Laptop IdeaPad P500 Touch

Hors ligne

#5 Le 17/07/2017, à 16:30

seiyadu

Re : logiciel pour modifier la vitesse

j'obtiens ça : modprobe: ERROR: could not insert 'it87': No such device

Hors ligne

#6 Le 17/07/2017, à 16:41

grandtoubab

Re : logiciel pour modifier la vitesse

Salut,
Quel est le problème? la vitesse du ventilateur ou la température excessive qui déclenche le ventilateur?

Pour monitorer la température il y a ça
https://wiki.ubuntu.com/Kernel/PowerMan … rmalIssues

sudo apt-get install thermald

Après verifier que la cpu est connue

systemctl status thermald.service

Si la cpu n'est pas connue, thermald ne peut rien faire, autant le desinstaller

Dernière modification par grandtoubab (Le 17/07/2017, à 16:53)


Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....

Hors ligne

#7 Le 17/07/2017, à 16:52

seiyadu

Re : logiciel pour modifier la vitesse

vus que mon pc chauffe je veux pouvoir mettre les ventilateurs a  80 % minimum pour le refroidir car il commence a chauffer

Hors ligne

#8 Le 17/07/2017, à 16:57

seiyadu

Re : logiciel pour modifier la vitesse

j'obtiens ca

donovan@donovan:~$ systemctl status thermald.service
● thermald.service - Thermal Daemon Service
   Loaded: loaded (/lib/systemd/system/thermald.service; enabled; vendor preset:
   Active: inactive (dead) since Mon 2017-07-17 17:53:17 CEST; 3min 38s ago
Main PID: 2373 (code=exited, status=1/FAILURE)

juil. 17 17:53:17 donovan systemd[1]: Starting Thermal Daemon Service...
juil. 17 17:53:17 donovan thermald[2373]: NO RAPL sysfs present
juil. 17 17:53:17 donovan thermald[2373]: 11 CPUID levels; family:model:stepping
juil. 17 17:53:17 donovan thermald[2373]:  Need Linux PowerCap sysfs
juil. 17 17:53:17 donovan thermald[2373]: Unsupported cpu model, use thermal-con
juil. 17 17:53:17 donovan thermald[2373]: THD engine start failed
juil. 17 17:53:17 donovan systemd[1]: Started Thermal Daemon Service.
lines 1-12/12 (END)

Hors ligne

#9 Le 17/07/2017, à 17:13

grandtoubab

Re : logiciel pour modifier la vitesse

seiyadu a écrit :

j'obtiens ca

donovan@donovan:~$ systemctl status thermald.service
● thermald.service - Thermal Daemon Service
   Loaded: loaded (/lib/systemd/system/thermald.service; enabled; vendor preset:
   Active: inactive (dead) since Mon 2017-07-17 17:53:17 CEST; 3min 38s ago
)

Pour l'erreur  Unsupported cpu model j'ai modifié /lib/systemd/system/thermald.service

debian:/etc/thermald# cat /lib/systemd/system/thermald.service
[Unit]
Description=Thermal Daemon Service

[Service]
Type=dbus
SuccessExitStatus=1
BusName=org.freedesktop.thermald
ExecStart=/usr/sbin/thermald --ignore-cpuid-check --no-daemon --dbus-enable

[Install]
WantedBy=multi-user.target
Alias=dbus-org.freedesktop.thermald.service

et ça démarre bien

root@debian:/etc/thermald# systemctl start thermald.service
root@debian:/etc/thermald# systemctl status thermald.service -l
● thermald.service - Thermal Daemon Service
   Loaded: loaded (/lib/systemd/system/thermald.service; enabled; vendor preset: enabled)
   Active: active (running) since Mon 2017-07-17 18:10:10 CEST; 15s ago
 Main PID: 3011 (thermald)
    Tasks: 2 (limit: 4915)
   CGroup: /system.slice/thermald.service
           └─3011 /usr/sbin/thermald --ignore-cpuid-check --no-daemon --dbus-enable

juil. 17 18:10:10 debian systemd[1]: Starting Thermal Daemon Service...
juil. 17 18:10:10 debian thermald[3011]: NO RAPL sysfs present
juil. 17 18:10:10 debian thermald[3011]: Polling mode is enabled: 4
juil. 17 18:10:10 debian thermald[3011]: Thermal DTS: No coretemp sysfs found
juil. 17 18:10:10 debian thermald[3011]: Thermal DTS or hwmon: No Zones present Need to configure manually
juil. 17 18:10:10 debian systemd[1]: Started Thermal Daemon Service.

Pour le reste , à toi de voir

Dernière modification par grandtoubab (Le 17/07/2017, à 17:20)


Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....

Hors ligne

#10 Le 17/07/2017, à 17:16

cqfd93

Re : logiciel pour modifier la vitesse

Modération

Bonjour,

@seiyadu :
Pour ajouter toi-même les balises code à ton message #8 :

  • Cliquer sur le lien « Modifier » en bas à droite du message

  • Sélectionner le texte

  • Cliquer sur le <> de l'éditeur de message
    1471986854.png


cqfd93

Hors ligne

#11 Le 17/07/2017, à 17:24

seiyadu

Re : logiciel pour modifier la vitesse

je ne suis pas sur debian mais sur ubuntu

Hors ligne

#12 Le 17/07/2017, à 17:28

grandtoubab

Re : logiciel pour modifier la vitesse

seiyadu a écrit :

je ne suis pas sur debian mais sur ubuntu

aucun rapport,  c'est un paquet Debian qui fonctionne de la même façon sur les 2 distributions
essai aussi de comprendre les sensors
https://doc.ubuntu-fr.org/lm-sensors

Dernière modification par grandtoubab (Le 17/07/2017, à 17:30)


Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....

Hors ligne