#1 Le 21/07/2018, à 14:11
- theo42
Redémarage bloqué après passage d'Ubuntu 16.04 vers 18.04
Bonjour,
J'ai un HP Streamx360 qui tournait sous Ubuntu 16.04 et ai décidé de le passer sous 18.04.
Après un update du système et un `sudo do-release-upgrade` un message de type "no new release found" est apparu, signifiant après recherche qu'il était préférable d'attendre la "late July" pour un upgrade vers 18.04 dans mon cas.
J'ai tout de même décidé d'accélérer le process en suivant les conseils du site suivant: https://linuxconfig.org/how-to-upgrade- … nic-beaver.
J'ai choisi la voie "how to upgrade the Debian way", en suivant les étapes:
`sudo sed -i 's/xenial/bionic/g' /etc/apt/sources.list`
ainsi que :
`sudo apt update && sudo apt -y dist-upgrade`
L'installation a pris un certain temps, mais sans accroc. Une fois terminée, j'ai redémarré ma machine, mais le boot s'arrête désormais à un bel écran noir avant même la page de login.
Aurais-je loupé une étape? Tout conseil me permettant de découvrir ce fameux Beaver serait grandement apprécié!
Ubuntument votre,
Théo
Hors ligne
#2 Le 22/07/2018, à 08:25
- malbo
Re : Redémarage bloqué après passage d'Ubuntu 16.04 vers 18.04
Bonjour,
Je te prie de réaliser un support Live de Ubuntu 18.04 64 bits (soit un LiveDVD soit une LiveUSB) et de démarrer ton ordi dessus en session live (choix Essayer Ubuntu). Tu feras un Boot-Info depuis la session live et tu donneras l'URL de ce Boot-Info dans ta réponse.
Motif de ma proposition :
- vérifier que la version 18.04 peut tourner correctement en session live (chose que tu aurais dû faire avant même de lancer ta mise à niveau 16.04 vers 18.04, comme c'est conseillé dans le paragraphe 4. J'ai choisi de passer à la nouvelle version d'Ubuntu. Dois-je prendre des précautions particulières ? de la doc "Mise à niveau (migration)" )
- disposer de l'outil nécessaire pour tenter une réinstallation de Ubuntu 18.04 suivant la doc Comment réinstaller Ubuntu ?
Dernière modification par malbo (Le 22/07/2018, à 08:34)
Hors ligne
#3 Le 24/07/2018, à 07:38
- carabao
Re : Redémarage bloqué après passage d'Ubuntu 16.04 vers 18.04
bonjour
Essaye en passant au kernel lors du démarrage les paramètres suivant:
noapic, nolapic pci=noaer,
et si nvidia nouveau.modeset=0
Si tu passes par une nouvelle installation d'un système avec home chiffré , lors du premier boot passer en ligne de commande est faire un
sudo apt install ecryptfs-utils cryptsetup pour pourvoir avoir accès à ton répertoire home chiffré.
1° PC portable MSI 17": Intel Core i5-7300HQ, 8gb, GPU Nvidia GTX 1050Ti GDDR5, SSD 256 Go + HDD 1 To avec kubuntu 17.10
2° PC portable LDLC 15": Intel Core i5, 8Gb ram, carte intel HD4600 - 1 SSD (système) et 1 HDD (répertoire perso) avec kubuntu 17.04
Hors ligne
#4 Le 26/07/2018, à 23:27
- theo42
Re : Redémarage bloqué après passage d'Ubuntu 16.04 vers 18.04
Bonsoir à tous et merci pour votre aide!
@malbo, voici l'URL: http://paste.ubuntu.com/p/y42g5KF95J/. Et la session live 18.04 semble fonctionner correctement!
@carabao, comment je passe par le kernel lors du démarrage?
Dernière modification par theo42 (Le 26/07/2018, à 23:27)
Hors ligne
#5 Le 27/07/2018, à 06:16
- malbo
Re : Redémarage bloqué après passage d'Ubuntu 16.04 vers 18.04
Ton Boot-Info est là :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 6.03
Boot sector info: Syslinux looks at sector 32816 of /dev/sda1 for its
second stage. The integrity check of Syslinux failed.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg
/EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 14.5 GiB, 15504900096 bytes, 30283008 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 30,283,007 30,280,960 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 squashfs
/dev/loop2 squashfs
/dev/loop3 squashfs
/dev/loop4 squashfs
/dev/loop5 squashfs
/dev/loop6 squashfs
/dev/loop7 squashfs
/dev/mmcblk0
/dev/mmcblk0p1 8522-59B9 vfat
/dev/mmcblk0p2 72905e39-fe01-43cf-8b85-4d1266b8054b ext4
/dev/mmcblk0p3 fd3ca6ae-6a24-4890-aad2-d4058d6a3afb swap
/dev/sda1 7C3E-EECE vfat UBUNTU 18_0
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 13 Jul 26 21:24 mmc-HBG4e__0x716aa05e -> ../../mmcblk0
lrwxrwxrwx 1 root root 15 Jul 26 21:24 mmc-HBG4e__0x716aa05e-part1 -> ../../mmcblk0p1
lrwxrwxrwx 1 root root 15 Jul 26 21:24 mmc-HBG4e__0x716aa05e-part2 -> ../../mmcblk0p2
lrwxrwxrwx 1 root root 15 Jul 26 21:24 mmc-HBG4e__0x716aa05e-part3 -> ../../mmcblk0p3
lrwxrwxrwx 1 root root 9 Jul 26 21:24 usb-_USB_DISK_2.0_07B60101DE17C3FC-0:0 -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 26 21:24 usb-_USB_DISK_2.0_07B60101DE17C3FC-0:0-part1 -> ../../sda1
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/mmcblk0p2 /media/ubuntu/72905e39-fe01-43cf-8b85-4d1266b8054b ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sda1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
set timeout=5
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz boot=casper integrity-check quiet splash ---
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
============================== sda1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
DEFAULT loadconfig
LABEL loadconfig
CONFIG /isolinux/isolinux.cfg
APPEND /isolinux/
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sda1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
?? = ?? ldlinux.sys 1
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/20364/mountinfo) leaked on lvs invocation. Parent PID 28986: bash
File descriptor 63 (pipe:[115335]) leaked on lvs invocation. Parent PID 28986: bash
ADDITIONAL INFORMATION :
=================== log of boot-info 20180726_2124 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
Error: /dev/mmcblk0boot0: unrecognised disk label
Error: /dev/mmcblk0boot1: unrecognised disk label
boot-info is executed in live-session (Ubuntu 18.04.1 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
ls: cannot access '/home/usr/.config': No such file or directory
mmcblk0 (sda) has unknown type. Please report this message to boot.repair@gmail.com
mount: /mnt/boot-sav/mmcblk0: /dev/mmcblk0 already mounted or mount point busy.
mount /dev/mmcblk0 : Error code 32
mount -r /dev/mmcblk0 /mnt/boot-sav/mmcblk0
mount: /mnt/boot-sav/mmcblk0: /dev/mmcblk0 already mounted or mount point busy.
mount -r /dev/mmcblk0 : Error code 32
cat: /sys/block/mmcblk0/mmcblk0boot0/start: No such file or directory
cat: /sys/block/mmcblk0/mmcblk0boot1/start: No such file or directory
=================== os-prober:
/dev/mmcblk0p2:Ubuntu 18.04 LTS (18.04):Ubuntu:linux
=================== blkid:
/dev/mmcblk0p1: UUID="8522-59B9" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="e441ad14-3c36-49d7-854b-969634045e90"
/dev/mmcblk0p2: UUID="72905e39-fe01-43cf-8b85-4d1266b8054b" TYPE="ext4" PARTUUID="09311544-475c-47fa-95aa-30d428e365e0"
/dev/sda1: LABEL="UBUNTU 18_0" UUID="7C3E-EECE" TYPE="vfat" PARTUUID="005cc861-01"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/mmcblk0p3: UUID="fd3ca6ae-6a24-4890-aad2-d4058d6a3afb" TYPE="swap" PARTUUID="1b403cbf-a358-40ef-97eb-1b80849bee5e"
/dev/mmcblk0: PTUUID="ec506570-c0c8-42e2-8d63-17693252d49b" PTTYPE="gpt"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
mount: /mnt/boot-sav/mmcblk0: /dev/mmcblk0 already mounted or mount point busy.
mount /dev/mmcblk0 : Error code 32
mount -r /dev/mmcblk0 /mnt/boot-sav/mmcblk0
mount: /mnt/boot-sav/mmcblk0: /dev/mmcblk0 already mounted or mount point busy.
mount -r /dev/mmcblk0 : Error code 32
=================== /media/ubuntu/72905e39-fe01-43cf-8b85-4d1266b8054b/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Jul 20 19:08 grub.d
total 156
-rwxr-xr-x 1 root root 9791 Apr 15 2016 00_header
-rwxr-xr-x 1 root root 9783 Jun 4 22:34 00_header.dpkg-new
-rwxr-xr-x 1 root root 6258 Mar 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 6258 Mar 4 13:11 05_debian_theme.dpkg-new
-rwxr-xr-x 1 root root 12512 Oct 12 2017 10_linux
-rwxr-xr-x 1 root root 12693 Jun 4 22:34 10_linux.dpkg-new
-rwxr-xr-x 1 root root 11082 Apr 15 2016 20_linux_xen
-rwxr-xr-x 1 root root 11298 Jun 4 22:34 20_linux_xen.dpkg-new
-rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 Apr 15 2016 30_os-prober
-rwxr-xr-x 1 root root 12059 Jun 4 22:34 30_os-prober.dpkg-new
-rwxr-xr-x 1 root root 1418 Apr 15 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 1418 Jun 4 22:34 30_uefi-firmware.dpkg-new
-rwxr-xr-x 1 root root 214 Apr 15 2016 40_custom
-rwxr-xr-x 1 root root 214 Jun 4 22:34 40_custom.dpkg-new
-rwxr-xr-x 1 root root 216 Apr 15 2016 41_custom
-rwxr-xr-x 1 root root 216 Jun 4 22:34 41_custom.dpkg-new
-rw-r--r-- 1 root root 483 Apr 15 2016 README
-rw-r--r-- 1 root root 483 Jun 4 22:34 README.dpkg-new
=================== /media/ubuntu/72905e39-fe01-43cf-8b85-4d1266b8054b/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of mmcblk0p2: UUID=8522-59B9 (mmcblk0p1)
/usr/share/boot-sav/bs-cmd_terminal.sh: line 179: warning: command substitution: ignored null byte in input
=================== efibootmgr -v
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 2001,0000,3000,2002,2004
Boot0000* ubuntu HD(1,GPT,e441ad14-3c36-49d7-854b-969634045e90,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot0001* USB Hard Drive (UEFI) - USB DISK 2.0 PciRoot(0x0)/Pci(0x14,0x0)/USB(0,0)/HD(1,MBR,0x5cc861,0x800,0x1ce0d00)RC
Boot2001* EFI USB Device RC
Boot3000* Internal Hard Disk or Solid State Disk RC
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
mmcblk0p1 : mmcblk0, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/mmcblk0p1.
mmcblk0p2 : mmcblk0, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, notbiosboot, /media/ubuntu/72905e39-fe01-43cf-8b85-4d1266b8054b.
mmcblk0 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/mmcblk0.
mmcblk0 : GPT, no-BIOS_boot, has-correctEFI, not-usb, mmc-disk, has-os, 1 sectors * 512 bytes
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, usb-disk, not-mmc, no-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:15.5GB:scsi:512:512:msdos: USB DISK 2.0:;
1:1049kB:15.5GB:15.5GB:fat32::boot, lba;
BYT;
/dev/mmcblk0boot0:4194kB:sd/mmc:512:512:unknown:Generic SD/MMC Storage Card:;
BYT;
/dev/mmcblk0boot1:4194kB:sd/mmc:512:512:unknown:Generic SD/MMC Storage Card:;
BYT;
/dev/mmcblk0:31.3GB:sd/mmc:512:512:gpt:MMC HBG4e:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:29.2GB:28.7GB:ext4::;
3:29.2GB:31.3GB:2029MB:linux-swap(v1)::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 1.8G
loop1 loop squashfs 86.9M
loop2 loop squashfs 34.7M
loop3 loop squashfs 140.9M
loop4 loop squashfs 2.3M
loop5 loop squashfs 13M
loop6 loop squashfs 14.5M
loop7 loop squashfs 3.7M
sda disk 14.5G
sda1 part vfat 14.4G UBUNTU 18_0
mmcblk0 disk 29.1G
mmcblk0p1 part vfat 512M
mmcblk0p2 part ext4 26.8G
mmcblk0p3 part swap 1.9G
mmcblk0boot0 disk 4M
mmcblk0boot1 disk 4M
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /rofs
loop1 1 1 0 /snap/core/4917
loop2 1 1 0 /snap/gtk-common-themes/319
loop3 1 1 0 /snap/gnome-3-26-1604/70
loop4 1 1 0 /snap/gnome-calculator/180
loop5 1 1 0 /snap/gnome-characters/103
loop6 1 1 0 /snap/gnome-logs/37
loop7 1 1 0 /snap/gnome-system-monitor/51
sda 1 0 1 running
sda1 1 0 1 /cdrom
mmcblk0 0 0 0
mmcblk0p1 0 0 0 /mnt/boot-sav/mmcblk0p1
mmcblk0p2 0 0 0 /media/ubuntu/72905e39-fe01-43cf-8b85-4d1266b8054b
mmcblk0p3 0 0 0
mmcblk0boot0 0 1 0
mmcblk0boot1 0 1 0
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=941944k,nr_inodes=235486,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=192624k,mode=755)
/dev/sda1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=24,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=14570)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=192620k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/mmcblk0p2 on /media/ubuntu/72905e39-fe01-43cf-8b85-4d1266b8054b type ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/var/lib/snapd/snaps/core_4917.snap on /snap/core/4917 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_319.snap on /snap/gtk-common-themes/319 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_70.snap on /snap/gnome-3-26-1604/70 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_180.snap on /snap/gnome-calculator/180 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_103.snap on /snap/gnome-characters/103 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_37.snap on /snap/gnome-logs/37 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_51.snap on /snap/gnome-system-monitor/51 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/mmcblk0p1 on /mnt/boot-sav/mmcblk0p1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=================== ls:
/sys/block/mmcblk0 (filtered): alignment_offset bdi capability dev device discard_alignment ext_range force_ro hidden holders inflight integrity mmcblk0boot0 mmcblk0boot1 mmcblk0p1 mmcblk0p2 mmcblk0p3 power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/mmcblk0boot0 (filtered): alignment_offset bdi capability dev device discard_alignment ext_range force_ro hidden holders inflight integrity power queue range removable ro ro_lock_until_next_power_on size slaves stat subsystem trace uevent
/sys/block/mmcblk0boot1 (filtered): alignment_offset bdi capability dev device discard_alignment ext_range force_ro hidden holders inflight integrity power queue range removable ro ro_lock_until_next_power_on size slaves stat subsystem trace uevent
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 size slaves stat subsystem trace uevent
/dev (filtered): HID-SENSOR-2000e1.7.auto autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 ecryptfs fb0 fd full fuse gpiochip0 gpiochip1 gpiochip2 hidraw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 iio:device0 iio:device1 iio:device2 iio:device3 iio:device4 initctl input kmsg lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mmcblk0 mmcblk0boot0 mmcblk0boot1 mmcblk0p1 mmcblk0p2 mmcblk0p3 mmcblk0rpmb mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sg0 shm snapshot snd stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/mmcblk0p1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 10 00 04 00 00 08 00 00 |................|
00000020 00 00 10 00 fe 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 b9 59 22 85 4e 4f 20 4e 41 4d 45 20 20 |..).Y".NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 920M 0 920M 0% /dev
tmpfs tmpfs 189M 1.7M 187M 1% /run
/dev/sda1 vfat 15G 1.9G 13G 13% /cdrom
/dev/loop0 squashfs 1.8G 1.8G 0 100% /rofs
/cow overlay 941M 527M 414M 57% /
tmpfs tmpfs 941M 15M 927M 2% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 941M 0 941M 0% /sys/fs/cgroup
tmpfs tmpfs 941M 156K 941M 1% /tmp
tmpfs tmpfs 189M 52K 189M 1% /run/user/999
/dev/mmcblk0p2 ext4 27G 19G 6.5G 74% /media/ubuntu/72905e39-fe01-43cf-8b85-4d1266b8054b
/dev/loop1 squashfs 87M 87M 0 100% /snap/core/4917
/dev/loop2 squashfs 35M 35M 0 100% /snap/gtk-common-themes/319
/dev/loop3 squashfs 141M 141M 0 100% /snap/gnome-3-26-1604/70
/dev/loop4 squashfs 2.4M 2.4M 0 100% /snap/gnome-calculator/180
/dev/loop5 squashfs 13M 13M 0 100% /snap/gnome-characters/103
/dev/loop6 squashfs 15M 15M 0 100% /snap/gnome-logs/37
/dev/loop7 squashfs 3.8M 3.8M 0 100% /snap/gnome-system-monitor/51
/dev/mmcblk0p1 vfat 511M 3.5M 508M 1% /mnt/boot-sav/mmcblk0p1
=================== fdisk -l:
Disk /dev/loop0: 1.8 GiB, 1864450048 bytes, 3641504 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 86.9 MiB, 91099136 bytes, 177928 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 34.7 MiB, 36323328 bytes, 70944 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 140.9 MiB, 147722240 bytes, 288520 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 2.3 MiB, 2433024 bytes, 4752 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop5: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop6: 14.5 MiB, 15196160 bytes, 29680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop7: 3.7 MiB, 3887104 bytes, 7592 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/mmcblk0: 29.1 GiB, 31272730624 bytes, 61079552 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: EC506570-C0C8-42E2-8D63-17693252D49B
Device Start End Sectors Size Type
/dev/mmcblk0p1 2048 1050623 1048576 512M EFI System
/dev/mmcblk0p2 1050624 57114623 56064000 26.8G Linux filesystem
/dev/mmcblk0p3 57114624 61077503 3962880 1.9G Linux swap
Disk /dev/mmcblk0boot1: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/mmcblk0boot0: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 14.5 GiB, 15504900096 bytes, 30283008 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x005cc861
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 30283007 30280960 14.4G c W95 FAT32 (LBA)
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of mmcblk0p2, using the following options: mmcblk0p1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on mmcblk0p1/efi/.../grub*.efi file!
=================== User settings
The settings chosen by the user will not act on the boot.
Tout parait normal dans ce Boot-Info. Essaie les solutions proposées par carabao. Si ça ne donne rien, tu pourras tenter une réinstallation de Ubuntu 18.04 suivant la Méthode 1 – Réinstaller tout le système sans toucher au «/home». Mais ça pourrait foirer parce que ta partition racine est déjà bien pleine comme on voit dans cet extrait (c'est dans la partie "df -Th" du Boot-Info) :
/dev/mmcblk0p2 ext4 27G 19G 6.5G 74% /media/ubuntu/72905e39-fe01-43cf-8b85-4d1266b8054b
La réinstallation va rajouter des Go et ça risque d'étouffer la partition racine, aussi il est indispensable (avant de lancer une réinstallation) que tu sauvegardes sur clé USB ou sur disque dur externe les docs précieux que tu peux avoir là-dedans. Plutôt qu'un réinstallation, le mieux serait une installation toute neuve de Ubuntu 18.04 et écrasant tout ce qu'il y a sur le disque ton module de stockage 32 Go avec le choix "Effacer le disque et installer Ubuntu" à l'étape "Type d'installation". Dans ce cas d'une installation toute neuve, l'installateur de 18.04 ne crée plus de partition swap (il crée un fichier swap noyé dans la partition racine) ce qui te ferait gagner de la place...
Dernière modification par malbo (Le 27/07/2018, à 06:21)
Hors ligne
#6 Le 28/07/2018, à 17:22
- theo42
Re : Redémarage bloqué après passage d'Ubuntu 16.04 vers 18.04
Ok je vais tenter la méthode carabao!
Oui j'ai fais ça un peu vite, j'aurais dû être plus précautioneux. J'ai seulement quelques fichiers à récupérer, je vais essayer mais si vraiment je n'y arrive pas alors je passerai par une réinstallation totale.
Dans le cas d'une évolution d'un Ubuntu antérieur vers un plus neuf, il y a forcément un swap créé? En effet avec cette machine qui possède très peu de disque c'est un peu embêtant.
Pour accéder au noyau, j'ai fais quelques recherches mais aimerais que vous validiez mes étapes histoires de pas dégrader la situation: au démarage je suis passer par grub, et au lieu d'enclencher "Entrée" devant l'option Ubuntu j'ai enclenché la touche "E".
Là, un éditeur de texte me propose d'éditer du code qui commence par:
"setparams 'Ubuntu
recordfail
load_video
gfxmode $linux_gfx_mode
...
"
Il faut donc que j'ajoute à ce niveau les instructions de @carabao? Au même niveau d'indentation que ce qui suit "setparams 'Ubuntu'"?
C'est bien du bash le language non?
@carabao, tu dis que si nvidia alors ajouter "nouveau.modeset=0", sinon "noapic, nolapic pci=noaer"?
Comment vérifier que c'est nvidia? J'ai pas idée sur cette machine.
Bon weekend!
Hors ligne
#7 Le 28/07/2018, à 17:40
- NicoApi73
Re : Redémarage bloqué après passage d'Ubuntu 16.04 vers 18.04
Bonjour,
Valable pour une session normale (pas live), c'est d'ailleurs un tout petit peu plus simple pour une live. Dès que grub apparaît, tu appuies sur une flèche pour arrêter le timeout,
puis tu appuies sur 'e'
- tu descends avec les touches (curseur) jusqu'à tomber sur
Linux /boot/vmlinuz...
C'est le premier que tu trouves qui est intéressant
- avec le curseur tu te déplaces pour le mettre après splash. Il est possible que la ligne de commande soit sur 2 lignes, tu déplaces le curseur vers la droite à partir de linux
- tu vas écrire les paramètres que tu souhaites, avec un espace entre splash et le reste...
- Le clavier est en QWERTY, donc faire attention à ce que tu tapes et ce qui est écrit
- tu valides par F10
- tu démarres avec le 1ier noyau (celui du haut)
Si tu ajoutes plusieurs paramètres, pas de virgules entre, juste un espace.
Tu as peu de risque, les modifications ne sont pas sauvegardées.
Dernière modification par NicoApi73 (Le 28/07/2018, à 17:49)
Hors ligne
#8 Le 28/07/2018, à 17:50
- theo42
Re : Redémarage bloqué après passage d'Ubuntu 16.04 vers 18.04
Merci pour ces précisions!
En effet j'ai une ligne de type
"linux /boot/... ... quiet splash ..."
Il faut donc que j'ajoute entre "splash" et la fin les paramètres évoqués par @caraboa?
Ces paramètres sont donc bien "nouveau.modeset=0", sinon "noapic, nolapic pci=noaer"? Comment repérer si je suis nvidia?
Encore un grand merci
Hors ligne
#9 Le 28/07/2018, à 17:54
- NicoApi73
Re : Redémarage bloqué après passage d'Ubuntu 16.04 vers 18.04
Il faut donc que j'ajoute entre "splash" et la fin les paramètres évoqués par @caraboa?
c'est ça
Je ne peux pas te confirmer les paramètres, je n'ai pas suivi en détail le fil.
A ma connaissance, pas de , entre noapic et nolapic
Essaie déjà avec noapic nolapic pci=noaer
Pour savoir si c'est une nVidia, il faudra passer par une live si tu n'arrives pas à démarrer une session normale ou au minimum un shell
sudo lshw -C display
Dernière modification par NicoApi73 (Le 28/07/2018, à 18:10)
Hors ligne