mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

papangue · Le 27/03/2008, à 23:52

salut
mon ordi ne s'éteint pas aprés la fermeture de la session. je suis sous ubuntu 7.10 je regarder dans diferent forum mais j'ai pas trouvé de solution ;
je suis obligé d'eteindre en mode forcé bouton marche arrèt 0/1
merci

Dernière modification par papangue (Le 30/04/2008, à 20:49)

darkshado · Le 27/03/2008, à 23:56

Problème de ACPI!
tape ça dans un terminal:

sudo gedit /boot/grub/menu.lst

et poste le sur le forum.

Dernière modification par darkshado (Le 28/03/2008, à 00:00)

papangue · Le 28/03/2008, à 10:49

merci de m'aidé

menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout		3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=fac6ff90-d1bf-4364-9de8-2db92a355a3b ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)

darkshado · Le 28/03/2008, à 11:57

Le fichier que tu as posté n'est pas complet il manque la partie de la fin du fichier peux-tu le reposter en entier stp.

papangue · Le 29/03/2008, à 16:02

ok

papangue · Le 29/03/2008, à 16:09

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout		3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=fac6ff90-d1bf-4364-9de8-2db92a355a3b ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=fr_FR

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title		Ubuntu 7.10, kernel 2.6.22-14-generic
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.22-14-generic root=UUID=fac6ff90-d1bf-4364-9de8-2db92a355a3b ro quiet splash locale=fr_FR
initrd		/boot/initrd.img-2.6.22-14-generic
quiet

title		Ubuntu 7.10, kernel 2.6.22-14-generic (recovery mode)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.22-14-generic root=UUID=fac6ff90-d1bf-4364-9de8-2db92a355a3b ro single
initrd		/boot/initrd.img-2.6.22-14-generic

title		Ubuntu 7.10, kernel 2.6.20-16-generic
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.20-16-generic root=UUID=fac6ff90-d1bf-4364-9de8-2db92a355a3b ro quiet splash locale=fr_FR
initrd		/boot/initrd.img-2.6.20-16-generic
quiet

title		Ubuntu 7.10, kernel 2.6.20-16-generic (recovery mode)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.20-16-generic root=UUID=fac6ff90-d1bf-4364-9de8-2db92a355a3b ro single
initrd		/boot/initrd.img-2.6.20-16-generic

title		Ubuntu 7.10, memtest86+
root		(hd0,0)
kernel		/boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

darkshado · Le 29/03/2008, à 19:42

Dans la partie de ton fichier ou tu as sa d'écrit. Tu rajoute la commande qui est en rouge et après tu enregistre le fichier et tu essaye d'éteindre ton ordinateur pour voir si ça marche.

## ## End Default Options ##
title Ubuntu 7.10, kernel 2.6.22-14-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=fac6ff90-d1bf-4364-9de8-2db92a355a3b ro quiet splash locale=fr_FR acpi=force
initrd /boot/initrd.img-2.6.22-14-generic
quiet

Dernière modification par darkshado (Le 29/03/2008, à 19:46)

papangue · Le 01/04/2008, à 19:10

j'ai essayé ta solution et c toujours pareil

darkshado · Le 02/04/2008, à 22:42

Peux-tu reposter ton "menu.lst" stp.

papangue · Le 04/04/2008, à 17:11

pourais tu me dire comment je dois faire
merci

darkshado · Le 05/04/2008, à 09:21

La même commande que dans le poste #2

papangue · Le 06/04/2008, à 15:39

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout		3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=fac6ff90-d1bf-4364-9de8-2db92a355a3b ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=fr_FR

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title		Ubuntu 7.10, kernel 2.6.22-14-generic
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.22-14-generic root=UUID=fac6ff90-d1bf-4364-9de8-2db92a355a3b ro quiet splash locale=fr_FR
initrd		/boot/initrd.img-2.6.22-14-generic
quiet

title		Ubuntu 7.10, kernel 2.6.22-14-generic (recovery mode)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.22-14-generic root=UUID=fac6ff90-d1bf-4364-9de8-2db92a355a3b ro single
initrd		/boot/initrd.img-2.6.22-14-generic

title		Ubuntu 7.10, kernel 2.6.20-16-generic
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.20-16-generic root=UUID=fac6ff90-d1bf-4364-9de8-2db92a355a3b ro quiet splash locale=fr_FR acpi=force

initrd		/boot/initrd.img-2.6.20-16-generic
quiet

title		Ubuntu 7.10, kernel 2.6.20-16-generic (recovery mode)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.20-16-generic root=UUID=fac6ff90-d1bf-4364-9de8-2db92a355a3b ro single
initrd		/boot/initrd.img-2.6.20-16-generic

title		Ubuntu 7.10, memtest86+
root		(hd0,0)
kernel		/boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

darkshado · Le 06/04/2008, à 17:39

Oulà! Combien de version de kernel as-tu ??? Je vois deux kernel le 2.6.20-16 et le 2.6.22-14 ?? Le "acpi=force" faut le placer pour le kernel 2.6.22-14 qui correspond à celui de UBUNTU gusty 7.10 .

masterno · Le 11/04/2008, à 22:05

Meme problème ici.

J'ai ajouter le acpi=force

Aucun résultats

D'autres pistes ?

darkshado · Le 12/04/2008, à 09:23

masterno poste ton fichier "menu.lst":

sudo gedit /boot/grub/menu.lst

masterno · Le 13/04/2008, à 00:04

J'ai ajouté finalement acpi=off et le problème semble être réglé......

merci

papangue · Le 14/04/2008, à 12:21

j'ai essayé avec acpi=off et acpi=force
toujour le même probleme

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout		3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=fac6ff90-d1bf-4364-9de8-2db92a355a3b ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=fr_FR

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title		Ubuntu 7.10, kernel 2.6.22-14-generic
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.22-14-generic root=UUID=fac6ff90-d1bf-4364-9de8-2db92a355a3b ro quiet splash locale=fr_FR
 acpi=force
initrd		/boot/initrd.img-2.6.22-14-generic
quiet

title		Ubuntu 7.10, kernel 2.6.22-14-generic (recovery mode)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.22-14-generic root=UUID=fac6ff90-d1bf-4364-9de8-2db92a355a3b ro single
initrd		/boot/initrd.img-2.6.22-14-generic

title		Ubuntu 7.10, kernel 2.6.20-16-generic
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.20-16-generic root=UUID=fac6ff90-d1bf-4364-9de8-2db92a355a3b ro quiet splash locale=fr_FR 

initrd		/boot/initrd.img-2.6.20-16-generic
quiet

title		Ubuntu 7.10, kernel 2.6.20-16-generic (recovery mode)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.20-16-generic root=UUID=fac6ff90-d1bf-4364-9de8-2db92a355a3b ro single
initrd		/boot/initrd.img-2.6.20-16-generic

title		Ubuntu 7.10, memtest86+
root		(hd0,0)
kernel		/boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

papangue · Le 15/04/2008, à 11:48

up

nico_co · Le 15/04/2008, à 13:36

Salut peux tu donnée des détail sur ta config matériel ( carte vidéo son périphérique ) genre
lspci
lsusb

Dernière modification par nico_co (Le 15/04/2008, à 13:37)

darkshado · Le 15/04/2008, à 14:58

Moi ce que je comprend pas c'est que tu retrouves avec deux kernels, alors que par exemple pour ma UBUNTU gusty j'en ai qu'un le 2.6.22-14 .

Dernière modification par darkshado (Le 15/04/2008, à 14:58)

papangue · Le 16/04/2008, à 12:38

ok

ratenom@ratenom-desktop:~$ lspci
00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 0e)
00:01.0 PCI bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port (rev 0e)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
01:04.0 Mass storage controller: Integrated Technology Express, Inc. IT/ITE8212 Dual channel ATA RAID controller (rev 13)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 19)
04:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 SE] (rev a1)

Bus 005 Device 001: ID 0000:0000  
Bus 002 Device 003: ID 03f0:1405 Hewlett-Packard Scanjet 3670
Bus 002 Device 001: ID 0000:0000  
Bus 003 Device 001: ID 0000:0000  
Bus 001 Device 001: ID 0000:0000  
Bus 004 Device 001: ID 0000:0000

nico_co · Le 17/04/2008, à 11:23

Donc tu dispose d'une magnifique carte son Intel HDA

00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)

et comme pour beaucoup d'utilisateur le driver alsa plante lamentablement à la fermeture
il suffit donc de décharger le dit module à l'arrêt
pour cela tu édit le fichier /etc/default/acpi-support

sudo gedit /etc/default/acpi-support

et de rajouté la ligne suivante

MODULES="snd-hda-intel"

papangue · Le 18/04/2008, à 06:58

j'ai toujour le même problème
je t'envoie le sudo gedit /etc/default/acpi-support

# Comment the next line to disable ACPI suspend to RAM
ACPI_SLEEP=true

# Comment the next line to disable suspend to disk
ACPI_HIBERNATE=true

# Change the following to "standby" to use ACPI S1 sleep, rather than S3.
# This will save less power, but may work on more machines
ACPI_SLEEP_MODE=mem

# Add modules to this list to have them removed before suspend and reloaded
# on resume. An example would be MODULES="em8300 yenta_socket"
#
# Note that network cards and USB controllers will automatically be unloaded 
# unless they're listed in MODULES_WHITELIST
MODULES=""

# Add modules to this list to leave them in the kernel over suspend/resume
MODULES_WHITELIST=""

# Should we save and restore state using the VESA BIOS Extensions?
SAVE_VBE_STATE=true

# The file that we use to save the vbestate
VBESTATE=/var/lib/acpi-support/vbestate

# Should we attempt to warm-boot the video hardware on resume?
POST_VIDEO=true

# Save and restore video state?
# SAVE_VIDEO_PCI_STATE=true

# Should we switch the screen off with DPMS on suspend?
USE_DPMS=true

# Use Radeontool to switch the screen off? Seems to be needed on some machines
# RADEON_LIGHT=true

# Uncomment the next line to switch away from X and back again after resume.
# This is needed for some hardware, but should be unnecessary on most.
# DOUBLE_CONSOLE_SWITCH=true

# Set the following to "platform" if you want to use ACPI to shut down
# your machine on hibernation
HIBERNATE_MODE=shutdown

# Comment this out to disable screen locking on resume
LOCK_SCREEN=true

# Uncomment this line to have DMA disabled before suspend and reenabled
# afterwards
# DISABLE_DMA=true

# Uncomment this line to attempt to reset the drive on resume. This seems
# to be needed for some Sonys
# RESET_DRIVE=true

# Add services to this list to stop them before suspend and restart them in 
# the resume process.
STOP_SERVICES=""

# Restart Infra Red services on resume - off by default as it crashes some
# machines
RESTART_IRDA=false

# Switch to laptop-mode on battery power - off by default as it causes odd
# hangs on some machines
ENABLE_LAPTOP_MODE=false

# Spindown time on battery
SPINDOWN_TIME=12

MODULES="snd-hda-intel"

papangue · Le 21/04/2008, à 07:22

up

de l'aide svp

Dernière modification par papangue (Le 21/04/2008, à 07:22)

nico_co · Le 21/04/2008, à 14:28

peux tu essayer

sudo rmmod snd-hda-intel

et tu éteint ta machine

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 27/03/2008, à 23:52

mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#2 Le 27/03/2008, à 23:56

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#3 Le 28/03/2008, à 10:49

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#4 Le 28/03/2008, à 11:57

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#5 Le 29/03/2008, à 16:02

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#6 Le 29/03/2008, à 16:09

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#7 Le 29/03/2008, à 19:42

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#8 Le 01/04/2008, à 19:10

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#9 Le 02/04/2008, à 22:42

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#10 Le 04/04/2008, à 17:11

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#11 Le 05/04/2008, à 09:21

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#12 Le 06/04/2008, à 15:39

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#13 Le 06/04/2008, à 17:39

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#14 Le 11/04/2008, à 22:05

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#15 Le 12/04/2008, à 09:23

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#16 Le 13/04/2008, à 00:04

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#17 Le 14/04/2008, à 12:21

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#18 Le 15/04/2008, à 11:48

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#19 Le 15/04/2008, à 13:36

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#20 Le 15/04/2008, à 14:58

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#21 Le 16/04/2008, à 12:38

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#22 Le 17/04/2008, à 11:23

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#23 Le 18/04/2008, à 06:58

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#24 Le 21/04/2008, à 07:22

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

#25 Le 21/04/2008, à 14:28

Re : mon ordinateur ne s'éteint pas ubuntu 7.10 (RÉSOLUE)

Pied de page des forums