Contenu | Rechercher | Menus

Annonce

La nouvelle clé USB Ubuntu-fr est en prévente
Rendez-vous sur la boutique En Vente Libre

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 05/08/2019, à 22:00

Maga

[fstab et Emergency mode] Disparition !

Bonjour,
Je suis en train de dépanner en mode hotline (200km) l'ordi de mes parents à qui il arrive toujours "des trucs" !
Un beau jour, "...ou peut-être une nuit...", ils se sont retrouvés sur le mode Emergency. En fouinant sur le forum, j'ai demandé à mon paternel la commande (merci Malbo)

systemctl --failed

Résultat
Result

Le disque dur est partitionné en trois avec deux Linux et une partition de données (+ le swap).
En l'état, son plus gros stress est qu'il n'accède plus aux données même via un liveCD, les partitions OS sont lisibles et démarrent (avant de passer en Emergency), donc DD pas mort.
Je lui ai demandé de me faire une copie du fstab... il n'y en a plus sur les deux OS !!!

Une idée ?

Dernière modification par Maga (Le 05/08/2019, à 22:02)

Hors ligne

#2 Le 05/08/2019, à 22:22

Naziel

Re : [fstab et Emergency mode] Disparition !

Bonjour,
Tu peux leur demander de démarrer sur un live usb et tu peux prendre le contrôle à distance du pc avec anydesk par exemple. Ca pourrait être plus simple à dépanner smile

Il n'est pas impossible que le disque dur donne des signes de faiblesse.

Tu peux faire un rapport smart pour voir l'état du disque

sudo apt update
sudo apt install smartmontools
sudo smartctl --smart=on /dev/sda
sudo smartctl -a /dev/sda

et un boot info: https://doc.ubuntu-fr.org/tutoriel/boot-info

Dernière modification par Naziel (Le 05/08/2019, à 22:30)


[ poster correctement un retour de commande ] [ poster correctement une photo ]
Nouvel adhérent FDN
thinkpad x220, Thinkstation E32 modifié: i5-4570, GTX 1060 6 Gb, 16 Gb de RAM, ...
Pour reprendre le contrôle des semences: https://kokopelli-semences.fr/fr/

En ligne

#3 Le 05/08/2019, à 22:24

Maga

Re : [fstab et Emergency mode] Disparition !

Naziel a écrit :

Bonjour,
Tu peux leur demander de démarrer sur un live usb et tu peux prendre le contrôle à distance du pc avec anydesk par exemple. Ca pourrait être plus simple à dépanner smile

Il n'est pas impossible que le disque dur donne des signes de faiblesse.

Tu peux faire un rapport smart pour voir l'état du disque

sudo apt update
sudo apt install smartmontools
sudo smartctl --smart=on /dev/sda
sudo smartctl -a /dev/sdX

et un boot info: https://doc.ubuntu-fr.org/tutoriel/boot-info

Le rapport smart, c'est sur une console en liveCD ? Ou en mode Emergency ?

Dernière modification par Maga (Le 05/08/2019, à 22:24)

Hors ligne

#4 Le 05/08/2019, à 22:30

Naziel

Re : [fstab et Emergency mode] Disparition !

C'est en live usb, il faut un accès internet, le rapport smart c'est le retour des 4 commandes (en particulier la dernière)

Edit: commande corrigée

Dernière modification par Naziel (Le 05/08/2019, à 22:30)


[ poster correctement un retour de commande ] [ poster correctement une photo ]
Nouvel adhérent FDN
thinkpad x220, Thinkstation E32 modifié: i5-4570, GTX 1060 6 Gb, 16 Gb de RAM, ...
Pour reprendre le contrôle des semences: https://kokopelli-semences.fr/fr/

En ligne

#5 Le 05/08/2019, à 22:32

Maga

Re : [fstab et Emergency mode] Disparition !

OK merci, je vais tenter ça et je reviens ASAP sur le forum !
Bonne soirée...

Hors ligne

#6 Le 05/08/2019, à 22:39

Naziel

Re : [fstab et Emergency mode] Disparition !

Le but est en fait de voir si c'est juste un changement d'uuid suite à un changement sur la partition de données ou si c'est des secteurs défectueux sur la partition de données


[ poster correctement un retour de commande ] [ poster correctement une photo ]
Nouvel adhérent FDN
thinkpad x220, Thinkstation E32 modifié: i5-4570, GTX 1060 6 Gb, 16 Gb de RAM, ...
Pour reprendre le contrôle des semences: https://kokopelli-semences.fr/fr/

En ligne

#7 Le 05/08/2019, à 22:42

Maga

Re : [fstab et Emergency mode] Disparition !

OK merci pour l'explication....

Hors ligne

#8 Aujourd'hui à 17:44

Maga

Re : [fstab et Emergency mode] Disparition !

Hello,
Etant chez mes parents, je peux agir sur la machine directement, voici donc le retour de la commande proposée par Niazel :

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 3.5" DT01ACA... Desktop HDD
Device Model:     TOSHIBA DT01ACA050
Serial Number:    23GRE9PPS
LU WWN Device Id: 5 000039 ff2f478a6
Firmware Version: MS1OA750
User Capacity:    500107862016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Aug 19 15:21:22 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 5128) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  86) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   093   093   016    Pre-fail  Always       -       35
  2 Throughput_Performance  0x0005   136   136   054    Pre-fail  Offline      -       92
  3 Spin_Up_Time            0x0007   124   124   024    Pre-fail  Always       -       185 (Average 184)
  4 Start_Stop_Count        0x0012   097   097   000    Old_age   Always       -       12074
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       1
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   118   118   020    Pre-fail  Offline      -       33
  9 Power_On_Hours          0x0012   099   099   000    Old_age   Always       -       13709
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   097   097   000    Old_age   Always       -       12074
192 Power-Off_Retract_Count 0x0032   090   090   000    Old_age   Always       -       12110
193 Load_Cycle_Count        0x0012   090   090   000    Old_age   Always       -       12110
194 Temperature_Celsius     0x0002   171   171   000    Old_age   Always       -       35 (Min/Max 6/40)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       1
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       88
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 704 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 704 occurred at disk power-on lifetime: 13709 hours (571 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 40 68 be b1 00  Error: UNC 64 sectors at LBA = 0x00b1be68 = 11648616

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 f0 b8 bd b1 e0 08      00:20:09.843  READ DMA EXT
  25 00 08 b0 bd b1 e0 08      00:20:09.843  READ DMA EXT
  25 00 08 a8 bd b1 e0 08      00:20:09.843  READ DMA EXT
  25 00 f0 58 bc b1 e0 08      00:20:09.842  READ DMA EXT
  25 00 08 50 bc b1 e0 08      00:20:09.842  READ DMA EXT

Error 703 occurred at disk power-on lifetime: 13708 hours (571 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 40 68 be b1 00  Error: UNC 64 sectors at LBA = 0x00b1be68 = 11648616

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 f0 b8 bd b1 e0 08      00:00:59.857  READ DMA EXT
  25 00 08 b0 bd b1 e0 08      00:00:59.857  READ DMA EXT
  25 00 08 a8 bd b1 e0 08      00:00:59.856  READ DMA EXT
  25 00 f0 58 bc b1 e0 08      00:00:59.855  READ DMA EXT
  25 00 08 50 bc b1 e0 08      00:00:59.855  READ DMA EXT

Error 702 occurred at disk power-on lifetime: 13708 hours (571 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 88 cb b1 00  Error: UNC 8 sectors at LBA = 0x00b1cb88 = 11651976

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 88 cb b1 e0 08      00:01:09.649  READ DMA EXT
  27 00 00 00 00 00 e0 08      00:01:09.649  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      00:01:09.647  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:01:09.644  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 08      00:01:09.644  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

Error 701 occurred at disk power-on lifetime: 13708 hours (571 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 88 cb b1 00  Error: UNC 8 sectors at LBA = 0x00b1cb88 = 11651976

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 88 cb b1 e0 08      00:01:05.831  READ DMA EXT
  25 00 08 80 cb b1 e0 08      00:01:05.831  READ DMA EXT
  25 00 08 70 cb b1 e0 08      00:01:05.816  READ DMA EXT
  27 00 00 00 00 00 e0 08      00:01:05.816  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      00:01:05.814  IDENTIFY DEVICE

Error 700 occurred at disk power-on lifetime: 13708 hours (571 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 80 b0 cb b1 00  Error: UNC 128 sectors at LBA = 0x00b1cbb0 = 11652016

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 80 b0 cb b1 e0 08      00:01:01.988  READ DMA EXT
  27 00 00 00 00 00 e0 08      00:01:01.987  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      00:01:01.985  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:01:01.983  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 08      00:01:01.982  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Hors ligne

#9 Aujourd'hui à 18:10

Naziel

Re : [fstab et Emergency mode] Disparition !

Le disque est très abîmé, il a 88 secteurs en attente de réallocation. C'est beaucoup.
Le pc a visiblement eu beaucoup d'allumages/extinctions, si je me trompe pas en moyenne le pc est resté allumé 68 min à chaque fois. Cela use le disque dur (il ne faut pas oublier que le disque dur a un fonctionnement mécanique, et qu'il a besoin de se mettre en rotation à chaque démarrage)
Le pc était éteint normalement? Est ce que le pc était amené à être déplacé? (je pense que c'est la deuxième option vu que le nombre de parcages correspond au nombre de mises en sécurité du disque. Il faut manier un disque dur en fonctionnement avec une infini douceur)
Par ailleurs les erreurs enregistrées sont très récentes

Y a t'il des données importantes sur ce disque?


[ poster correctement un retour de commande ] [ poster correctement une photo ]
Nouvel adhérent FDN
thinkpad x220, Thinkstation E32 modifié: i5-4570, GTX 1060 6 Gb, 16 Gb de RAM, ...
Pour reprendre le contrôle des semences: https://kokopelli-semences.fr/fr/

En ligne

#10 Aujourd'hui à 18:20

Maga

Re : [fstab et Emergency mode] Disparition !

Non, c'est une tour fixe et à priori non déplacée depuis son montage.
Données à récupérer d'une valeur commerciale nulle mais d'une valeur sentimentale infinie... autant dire le plus important dans la vie (photos,etc...).
Disons qu'il y a eu un délai un peu long depuis la dernière sauvegarde (6 mois je crois).
C'est mort ?

Hors ligne

#11 Aujourd'hui à 19:33

Naziel

Re : [fstab et Emergency mode] Disparition !

Ok.
Pourrais tu fournir un boot info stp? https://doc.ubuntu-fr.org/tutoriel/boot-info
Cela me permettra de voir le partitionnement.

Par ailleurs, je pense qu'il serait bien de faire une copie exacte de ce disque dur vers un autre afin de pouvoir travailler sur la copie. As tu un autre disque dur de 500 GB ou plus de libre qui pourrait accueillir la copie?


[ poster correctement un retour de commande ] [ poster correctement une photo ]
Nouvel adhérent FDN
thinkpad x220, Thinkstation E32 modifié: i5-4570, GTX 1060 6 Gb, 16 Gb de RAM, ...
Pour reprendre le contrôle des semences: https://kokopelli-semences.fr/fr/

En ligne

#12 Aujourd'hui à 22:03

Maga

Re : [fstab et Emergency mode] Disparition !

Le boot info : http://paste.ubuntu.com/p/GGx3rmsjsR/
Pour la copie, je vais voir...
Mille merci pour ton aide !

Dernière modification par Maga (Aujourd'hui à 22:04)

Hors ligne

#13 Aujourd'hui à 22:12

xubu1957

Re : [fstab et Emergency mode] Disparition !

Bonjour,

Collage du Boot-Info :

Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for /boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk search_fs_uuid
    ---------------------------------------------------------------------------
    
    config script
    ---------------------------------------------------------------------------
    search.fs_uuid 2b98da33-5663-4b52-a2ed-821f8fcc60e8 root hd1,msdos2 
    set prefix=($root)'/boot/grub'
    
    ---------------------------------------------------------------------------
 => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub on this drive.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda3: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Linux Mint 19
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda4: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: /mnt/BootInfo/sda4: can't read superblock on /dev/sda4.

sdb1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu precise (12.04.5 LTS)
    Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sdb2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Linux Mint 19
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048    72,900,485    72,898,438  83 Linux
/dev/sda2         959,191,040   976,773,167    17,582,128  82 Linux swap / Solaris
/dev/sda3          72,900,608   145,575,935    72,675,328  83 Linux
/dev/sda4         145,575,936   959,191,039   813,615,104  83 Linux


Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 223.6 GiB, 240057409536 bytes, 468862128 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *          2,048   234,414,079   234,412,032  83 Linux
/dev/sdb2         234,414,080   468,860,927   234,446,848  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1                                              squashfs   
/dev/loop2                                              squashfs   
/dev/loop3                                              squashfs   
/dev/loop4                                              squashfs   
/dev/loop5                                              squashfs   
/dev/loop6                                              squashfs   
/dev/loop7                                              squashfs   
/dev/sda1        3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2   ext4       
/dev/sda2        d6e37550-8a1b-48ca-95c5-30e1e365261f   swap       
/dev/sda3        d0e7bc4e-eab9-4c63-bfc6-cca250fbd474   ext4       
/dev/sda4        4e1148c8-479f-4c02-90cf-9181623871cb   ext4       
/dev/sdb1        59dd2d22-8c0f-40af-af59-42cfd4749a16   ext4       
/dev/sdb2        2b98da33-5663-4b52-a2ed-821f8fcc60e8   ext4       
/dev/sr0         2018-07-25-03-21-56-00                 iso9660    Ubuntu 18.04.1 LTS amd64

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Aug 19 15:06 ata-HL-DT-ST_DVDRAM_GH24NS95_KNGCASD5937 -> ../../sr0
lrwxrwxrwx 1 root root  9 Aug 19 20:01 ata-KINGSTON_SA400S37240G_50026B768230B60D -> ../../sdb
lrwxrwxrwx 1 root root 10 Aug 19 20:01 ata-KINGSTON_SA400S37240G_50026B768230B60D-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Aug 19 20:01 ata-KINGSTON_SA400S37240G_50026B768230B60D-part2 -> ../../sdb2
lrwxrwxrwx 1 root root  9 Aug 19 20:01 ata-TOSHIBA_DT01ACA050_23GRE9PPS -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 19 20:01 ata-TOSHIBA_DT01ACA050_23GRE9PPS-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Aug 19 20:01 ata-TOSHIBA_DT01ACA050_23GRE9PPS-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Aug 19 20:01 ata-TOSHIBA_DT01ACA050_23GRE9PPS-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Aug 19 20:01 ata-TOSHIBA_DT01ACA050_23GRE9PPS-part4 -> ../../sda4
lrwxrwxrwx 1 root root  9 Aug 19 15:06 usb-Multi_Flash_Reader_058F63666471-0:0 -> ../../sdc
lrwxrwxrwx 1 root root  9 Aug 19 20:01 wwn-0x5000039ff2f478a6 -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 19 20:01 wwn-0x5000039ff2f478a6-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Aug 19 20:01 wwn-0x5000039ff2f478a6-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Aug 19 20:01 wwn-0x5000039ff2f478a6-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Aug 19 20:01 wwn-0x5000039ff2f478a6-part4 -> ../../sda4
lrwxrwxrwx 1 root root  9 Aug 19 15:06 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root  9 Aug 19 20:01 wwn-0x50026b768230b60d -> ../../sdb
lrwxrwxrwx 1 root root 10 Aug 19 20:01 wwn-0x50026b768230b60d-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Aug 19 20:01 wwn-0x50026b768230b60d-part2 -> ../../sdb2

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sr0         /cdrom                   iso9660    (ro,noatime,nojoliet,check=s,map=n,blocksize=2048)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
else
  search --no-floppy --fs-uuid --set=root 3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=10
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 10 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
	else
	  search --no-floppy --fs-uuid --set=root 3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
	fi
        linux	/boot/vmlinuz-4.15.0-29-generic root=UUID=3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-29-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2' {
	menuentry 'Ubuntu, avec Linux 4.15.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-advanced-3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
		else
		  search --no-floppy --fs-uuid --set=root 3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
		fi
		echo	'Chargement de Linux 4.15.0-29-generic…'
	        linux	/boot/vmlinuz-4.15.0-29-generic root=UUID=3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-29-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-recovery-3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
		else
		  search --no-floppy --fs-uuid --set=root 3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
		fi
		echo	'Chargement de Linux 4.15.0-29-generic…'
	        linux	/boot/vmlinuz-4.15.0-29-generic root=UUID=3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-29-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
	else
	  search --no-floppy --fs-uuid --set=root 3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
	else
	  search --no-floppy --fs-uuid --set=root 3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Linux Mint 17.3 Rosa (17.3) (sur /dev/sda3)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-224f2f56-bf83-4b81-b6df-28824ec0749e' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  224f2f56-bf83-4b81-b6df-28824ec0749e
	else
	  search --no-floppy --fs-uuid --set=root 224f2f56-bf83-4b81-b6df-28824ec0749e
	fi
	linux /boot/vmlinuz-3.19.0-32-generic root=UUID=224f2f56-bf83-4b81-b6df-28824ec0749e ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.19.0-32-generic
}
submenu 'Options avancées pour Linux Mint 17.3 Rosa (17.3) (sur /dev/sda3)' $menuentry_id_option 'osprober-gnulinux-advanced-224f2f56-bf83-4b81-b6df-28824ec0749e' {
	menuentry 'Linux Mint 17.3 KDE 64-bit (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.19.0-32-generic--224f2f56-bf83-4b81-b6df-28824ec0749e' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  224f2f56-bf83-4b81-b6df-28824ec0749e
		else
		  search --no-floppy --fs-uuid --set=root 224f2f56-bf83-4b81-b6df-28824ec0749e
		fi
		linux /boot/vmlinuz-3.19.0-32-generic root=UUID=224f2f56-bf83-4b81-b6df-28824ec0749e ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.19.0-32-generic
	}
	menuentry 'Linux Mint 17.3 KDE 64-bit, avec Linux 3.19.0-32-generic (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.19.0-32-generic--224f2f56-bf83-4b81-b6df-28824ec0749e' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  224f2f56-bf83-4b81-b6df-28824ec0749e
		else
		  search --no-floppy --fs-uuid --set=root 224f2f56-bf83-4b81-b6df-28824ec0749e
		fi
		linux /boot/vmlinuz-3.19.0-32-generic root=UUID=224f2f56-bf83-4b81-b6df-28824ec0749e ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.19.0-32-generic
	}
	menuentry 'Linux Mint 17.3 KDE 64-bit, with Linux 3.19.0-32-generic (recovery mode) (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.19.0-32-generic-root=UUID=224f2f56-bf83-4b81-b6df-28824ec0749e ro recovery nomodeset-224f2f56-bf83-4b81-b6df-28824ec0749e' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  224f2f56-bf83-4b81-b6df-28824ec0749e
		else
		  search --no-floppy --fs-uuid --set=root 224f2f56-bf83-4b81-b6df-28824ec0749e
		fi
		linux /boot/vmlinuz-3.19.0-32-generic root=UUID=224f2f56-bf83-4b81-b6df-28824ec0749e ro recovery nomodeset
		initrd /boot/initrd.img-3.19.0-32-generic
	}
}

menuentry 'Ubuntu 12.04.5 LTS (12.04) (sur /dev/sdb1)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-59dd2d22-8c0f-40af-af59-42cfd4749a16' {
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
	else
	  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
	fi
	linux /boot/vmlinuz-3.2.0-126-generic-pae root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.2.0-126-generic-pae
}
submenu 'Options avancées pour Ubuntu 12.04.5 LTS (12.04) (sur /dev/sdb1)' $menuentry_id_option 'osprober-gnulinux-advanced-59dd2d22-8c0f-40af-af59-42cfd4749a16' {
	menuentry 'Ubuntu, avec Linux 3.2.0-126-generic-pae (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-126-generic-pae--59dd2d22-8c0f-40af-af59-42cfd4749a16' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
		else
		  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
		fi
		linux /boot/vmlinuz-3.2.0-126-generic-pae root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.2.0-126-generic-pae
	}
	menuentry 'Ubuntu, with Linux 3.2.0-126-generic-pae (recovery mode) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-126-generic-pae-root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset-59dd2d22-8c0f-40af-af59-42cfd4749a16' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
		else
		  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
		fi
		linux /boot/vmlinuz-3.2.0-126-generic-pae root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset
		initrd /boot/initrd.img-3.2.0-126-generic-pae
	}
	menuentry 'Ubuntu, avec Linux 3.2.0-126-generic (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-126-generic--59dd2d22-8c0f-40af-af59-42cfd4749a16' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
		else
		  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
		fi
		linux /boot/vmlinuz-3.2.0-126-generic root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.2.0-126-generic
	}
	menuentry 'Ubuntu, with Linux 3.2.0-126-generic (recovery mode) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-126-generic-root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset-59dd2d22-8c0f-40af-af59-42cfd4749a16' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
		else
		  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
		fi
		linux /boot/vmlinuz-3.2.0-126-generic root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset
		initrd /boot/initrd.img-3.2.0-126-generic
	}
	menuentry 'Ubuntu, avec Linux 3.2.0-37-generic (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-37-generic--59dd2d22-8c0f-40af-af59-42cfd4749a16' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
		else
		  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
		fi
		linux /boot/vmlinuz-3.2.0-37-generic root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.2.0-37-generic
	}
	menuentry 'Ubuntu, with Linux 3.2.0-37-generic (recovery mode) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-37-generic-root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset-59dd2d22-8c0f-40af-af59-42cfd4749a16' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
		else
		  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
		fi
		linux /boot/vmlinuz-3.2.0-37-generic root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset
		initrd /boot/initrd.img-3.2.0-37-generic
	}
}

set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2 /               ext4    errors=remount-ro 0       1
# /STOCK was on /dev/sda4 during installation
UUID=4e1148c8-479f-4c02-90cf-9181623871cb /STOCK          ext4    defaults        0       2
# swap was on /dev/sda2 during installation
UUID=d6e37550-8a1b-48ca-95c5-30e1e365261f none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

   8.361000061 = 8.977555456    boot/grub/grub.cfg                             2
   8.360969543 = 8.977522688    boot/grub/i386-pc/core.img                     1
   8.356594086 = 8.972824576    boot/vmlinuz-4.15.0-29-generic                 1
   8.356594086 = 8.972824576    vmlinuz                                        1
   3.598407745 = 3.863760896    boot/initrd.img-4.15.0-29-generic              3
   3.598407745 = 3.863760896    initrd.img                                     3
   3.598407745 = 3.863760896    initrd.img.old                                 3

=========================== sda3/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
else
  search --no-floppy --fs-uuid --set=root d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Linux Mint 19 Cinnamon' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d0e7bc4e-eab9-4c63-bfc6-cca250fbd474' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
	else
	  search --no-floppy --fs-uuid --set=root d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
	fi
        linux	/boot/vmlinuz-4.15.0-20-generic root=UUID=d0e7bc4e-eab9-4c63-bfc6-cca250fbd474 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-20-generic
}
submenu 'Options avancées pour Linux Mint 19 Cinnamon' $menuentry_id_option 'gnulinux-advanced-d0e7bc4e-eab9-4c63-bfc6-cca250fbd474' {
	menuentry 'Linux Mint 19 Cinnamon, avec Linux 4.15.0-20-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-20-generic-advanced-d0e7bc4e-eab9-4c63-bfc6-cca250fbd474' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
		else
		  search --no-floppy --fs-uuid --set=root d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
		fi
		echo	'Chargement de Linux 4.15.0-20-generic…'
	        linux	/boot/vmlinuz-4.15.0-20-generic root=UUID=d0e7bc4e-eab9-4c63-bfc6-cca250fbd474 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-20-generic
	}
	menuentry 'Linux Mint 19 Cinnamon, with Linux 4.15.0-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-20-generic-recovery-d0e7bc4e-eab9-4c63-bfc6-cca250fbd474' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
		else
		  search --no-floppy --fs-uuid --set=root d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
		fi
		echo	'Chargement de Linux 4.15.0-20-generic…'
	        linux	/boot/vmlinuz-4.15.0-20-generic root=UUID=d0e7bc4e-eab9-4c63-bfc6-cca250fbd474 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-20-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
	else
	  search --no-floppy --fs-uuid --set=root d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
	else
	  search --no-floppy --fs-uuid --set=root d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu 18.04.1 LTS (18.04) (sur /dev/sda1)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
	else
	  search --no-floppy --fs-uuid --set=root 3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
	fi
	linux /boot/vmlinuz-4.15.0-29-generic root=UUID=3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-4.15.0-29-generic
}
submenu 'Options avancées pour Ubuntu 18.04.1 LTS (18.04) (sur /dev/sda1)' $menuentry_id_option 'osprober-gnulinux-advanced-3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2' {
	menuentry 'Ubuntu (sur /dev/sda1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-29-generic--3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
		else
		  search --no-floppy --fs-uuid --set=root 3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
		fi
		linux /boot/vmlinuz-4.15.0-29-generic root=UUID=3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-29-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-29-generic (sur /dev/sda1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-29-generic--3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
		else
		  search --no-floppy --fs-uuid --set=root 3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
		fi
		linux /boot/vmlinuz-4.15.0-29-generic root=UUID=3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-29-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-29-generic (recovery mode) (sur /dev/sda1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-29-generic-root=UUID=3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2 ro recovery nomodeset-3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
		else
		  search --no-floppy --fs-uuid --set=root 3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
		fi
		linux /boot/vmlinuz-4.15.0-29-generic root=UUID=3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2 ro recovery nomodeset
		initrd /boot/initrd.img-4.15.0-29-generic
	}
}

menuentry 'Ubuntu 12.04.5 LTS (12.04) (sur /dev/sdb1)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-59dd2d22-8c0f-40af-af59-42cfd4749a16' {
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
	else
	  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
	fi
	linux /boot/vmlinuz-3.2.0-126-generic-pae root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.2.0-126-generic-pae
}
submenu 'Options avancées pour Ubuntu 12.04.5 LTS (12.04) (sur /dev/sdb1)' $menuentry_id_option 'osprober-gnulinux-advanced-59dd2d22-8c0f-40af-af59-42cfd4749a16' {
	menuentry 'Ubuntu, avec Linux 3.2.0-126-generic-pae (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-126-generic-pae--59dd2d22-8c0f-40af-af59-42cfd4749a16' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
		else
		  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
		fi
		linux /boot/vmlinuz-3.2.0-126-generic-pae root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.2.0-126-generic-pae
	}
	menuentry 'Ubuntu, with Linux 3.2.0-126-generic-pae (recovery mode) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-126-generic-pae-root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset-59dd2d22-8c0f-40af-af59-42cfd4749a16' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
		else
		  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
		fi
		linux /boot/vmlinuz-3.2.0-126-generic-pae root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset
		initrd /boot/initrd.img-3.2.0-126-generic-pae
	}
	menuentry 'Ubuntu, avec Linux 3.2.0-126-generic (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-126-generic--59dd2d22-8c0f-40af-af59-42cfd4749a16' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
		else
		  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
		fi
		linux /boot/vmlinuz-3.2.0-126-generic root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.2.0-126-generic
	}
	menuentry 'Ubuntu, with Linux 3.2.0-126-generic (recovery mode) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-126-generic-root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset-59dd2d22-8c0f-40af-af59-42cfd4749a16' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
		else
		  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
		fi
		linux /boot/vmlinuz-3.2.0-126-generic root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset
		initrd /boot/initrd.img-3.2.0-126-generic
	}
	menuentry 'Ubuntu, avec Linux 3.2.0-37-generic (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-37-generic--59dd2d22-8c0f-40af-af59-42cfd4749a16' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
		else
		  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
		fi
		linux /boot/vmlinuz-3.2.0-37-generic root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.2.0-37-generic
	}
	menuentry 'Ubuntu, with Linux 3.2.0-37-generic (recovery mode) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-37-generic-root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset-59dd2d22-8c0f-40af-af59-42cfd4749a16' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
		else
		  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
		fi
		linux /boot/vmlinuz-3.2.0-37-generic root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset
		initrd /boot/initrd.img-3.2.0-37-generic
	}
}

set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda3/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda3 during installation
UUID=d0e7bc4e-eab9-4c63-bfc6-cca250fbd474 /               ext4    errors=remount-ro 0       1
# /STOCK was on /dev/sda4 during installation
UUID=4e1148c8-479f-4c02-90cf-9181623871cb /STOCK          ext4    defaults        0       2
# swap was on /dev/sda2 during installation
UUID=d6e37550-8a1b-48ca-95c5-30e1e365261f none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda3: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  59.624927521 = 64.021778432   boot/grub/grub.cfg                             1
  39.109989166 = 41.994031104   boot/grub/i386-pc/core.img                     1
  39.081897736 = 41.963868160   boot/vmlinuz-4.15.0-20-generic                 1
  39.081897736 = 41.963868160   vmlinuz                                        1
  41.729598999 = 44.806815744   boot/initrd.img-4.15.0-20-generic              2
  41.729598999 = 44.806815744   initrd.img                                     2
  41.729598999 = 44.806815744   initrd.img.old                                 2

=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod vbe
  insmod vga
  insmod video_bochs
  insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  insmod part_msdos
  insmod ext2
  set root='(hd1,msdos1)'
  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
  set locale_dir=($root)/boot/grub/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, avec Linux 3.2.0-126-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos1)'
	search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
	linux	/boot/vmlinuz-3.2.0-126-generic-pae root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.2.0-126-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-126-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos1)'
	search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
	echo	'Chargement de Linux 3.2.0-126-generic-pae ...'
	linux	/boot/vmlinuz-3.2.0-126-generic-pae root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset 
	echo	'Chargement du disque mémoire initial ...'
	initrd	/boot/initrd.img-3.2.0-126-generic-pae
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, avec Linux 3.2.0-126-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos1)'
	search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
	linux	/boot/vmlinuz-3.2.0-126-generic root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.2.0-126-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-126-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos1)'
	search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
	echo	'Chargement de Linux 3.2.0-126-generic ...'
	linux	/boot/vmlinuz-3.2.0-126-generic root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset 
	echo	'Chargement du disque mémoire initial ...'
	initrd	/boot/initrd.img-3.2.0-126-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-37-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos1)'
	search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
	linux	/boot/vmlinuz-3.2.0-37-generic root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.2.0-37-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-37-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos1)'
	search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
	echo	'Chargement de Linux 3.2.0-37-generic ...'
	linux	/boot/vmlinuz-3.2.0-37-generic root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset 
	echo	'Chargement du disque mémoire initial ...'
	initrd	/boot/initrd.img-3.2.0-37-generic
}
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos1)'
	search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos1)'
	search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Linux Mint 17 Cinnamon 64-bit, 3.13.0-24-generic (/dev/sda1) (on /dev/sda1)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos1)'
	search --no-floppy --fs-uuid --set=root 9399d3ba-8d57-4527-abb2-11107a470e19
	linux /boot/vmlinuz-3.13.0-24-generic root=UUID=9399d3ba-8d57-4527-abb2-11107a470e19 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.13.0-24-generic
}
menuentry "Linux Mint 17 Cinnamon 64-bit, 3.13.0-24-generic (/dev/sda1) -- recovery mode (on /dev/sda1)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos1)'
	search --no-floppy --fs-uuid --set=root 9399d3ba-8d57-4527-abb2-11107a470e19
	linux /boot/vmlinuz-3.13.0-24-generic root=UUID=9399d3ba-8d57-4527-abb2-11107a470e19 ro recovery nomodeset
	initrd /boot/initrd.img-3.13.0-24-generic
}
menuentry "Linux Mint 17.3 KDE 64-bit' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-224f2f56-bf83-4b81-b6df-28824ec0749e (on /dev/sda3)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos3)'
	search --no-floppy --fs-uuid --set=root 224f2f56-bf83-4b81-b6df-28824ec0749e
	linux /boot/vmlinuz-3.19.0-32-generic root=UUID=224f2f56-bf83-4b81-b6df-28824ec0749e ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.19.0-32-generic
}
menuentry "Linux Mint 17.3 KDE 64-bit, avec Linux 3.19.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-32-generic-advanced-224f2f56-bf83-4b81-b6df-28824ec0749e (on /dev/sda3)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos3)'
	search --no-floppy --fs-uuid --set=root 224f2f56-bf83-4b81-b6df-28824ec0749e
	linux /boot/vmlinuz-3.19.0-32-generic root=UUID=224f2f56-bf83-4b81-b6df-28824ec0749e ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.19.0-32-generic
}
menuentry "Linux Mint 17.3 KDE 64-bit, with Linux 3.19.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-32-generic-recovery-224f2f56-bf83-4b81-b6df-28824ec0749e (on /dev/sda3)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos3)'
	search --no-floppy --fs-uuid --set=root 224f2f56-bf83-4b81-b6df-28824ec0749e
	linux /boot/vmlinuz-3.19.0-32-generic root=UUID=224f2f56-bf83-4b81-b6df-28824ec0749e ro recovery nomodeset
	initrd /boot/initrd.img-3.19.0-32-generic
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sdb1 during installation
UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda2 during installation
UUID=d6e37550-8a1b-48ca-95c5-30e1e365261f none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  20.130569458 = 21.615034368   boot/grub/grub.cfg                             1
 104.146621704 = 111.826583552  boot/grub/core.img                             1
   0.622734070 = 0.668655616    boot/vmlinuz-3.2.0-126-generic                 1
   1.357254028 = 1.457340416    boot/vmlinuz-3.2.0-126-generic-pae             1
  80.133827209 = 86.043041792   boot/vmlinuz-3.2.0-37-generic                  1
   0.622734070 = 0.668655616    vmlinuz                                        1
  80.133827209 = 86.043041792   vmlinuz.old                                    1
  35.350128174 = 37.956911104   boot/initrd.img-3.2.0-126-generic              3
   1.162639618 = 1.248374784    boot/initrd.img-3.2.0-126-generic-pae          2
   2.037715912 = 2.187980800    boot/initrd.img-3.2.0-37-generic               2
   2.037715912 = 2.187980800    initrd.img.old                                 2

=========================== sdb2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2  2b98da33-5663-4b52-a2ed-821f8fcc60e8
else
  search --no-floppy --fs-uuid --set=root 2b98da33-5663-4b52-a2ed-821f8fcc60e8
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Linux Mint 19 Cinnamon' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-2b98da33-5663-4b52-a2ed-821f8fcc60e8' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2  2b98da33-5663-4b52-a2ed-821f8fcc60e8
	else
	  search --no-floppy --fs-uuid --set=root 2b98da33-5663-4b52-a2ed-821f8fcc60e8
	fi
        linux	/boot/vmlinuz-4.15.0-20-generic root=UUID=2b98da33-5663-4b52-a2ed-821f8fcc60e8 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-20-generic
}
submenu 'Options avancées pour Linux Mint 19 Cinnamon' $menuentry_id_option 'gnulinux-advanced-2b98da33-5663-4b52-a2ed-821f8fcc60e8' {
	menuentry 'Linux Mint 19 Cinnamon, avec Linux 4.15.0-20-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-20-generic-advanced-2b98da33-5663-4b52-a2ed-821f8fcc60e8' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2  2b98da33-5663-4b52-a2ed-821f8fcc60e8
		else
		  search --no-floppy --fs-uuid --set=root 2b98da33-5663-4b52-a2ed-821f8fcc60e8
		fi
		echo	'Chargement de Linux 4.15.0-20-generic…'
	        linux	/boot/vmlinuz-4.15.0-20-generic root=UUID=2b98da33-5663-4b52-a2ed-821f8fcc60e8 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-20-generic
	}
	menuentry 'Linux Mint 19 Cinnamon, with Linux 4.15.0-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-20-generic-recovery-2b98da33-5663-4b52-a2ed-821f8fcc60e8' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2  2b98da33-5663-4b52-a2ed-821f8fcc60e8
		else
		  search --no-floppy --fs-uuid --set=root 2b98da33-5663-4b52-a2ed-821f8fcc60e8
		fi
		echo	'Chargement de Linux 4.15.0-20-generic…'
	        linux	/boot/vmlinuz-4.15.0-20-generic root=UUID=2b98da33-5663-4b52-a2ed-821f8fcc60e8 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-20-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2  2b98da33-5663-4b52-a2ed-821f8fcc60e8
	else
	  search --no-floppy --fs-uuid --set=root 2b98da33-5663-4b52-a2ed-821f8fcc60e8
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2  2b98da33-5663-4b52-a2ed-821f8fcc60e8
	else
	  search --no-floppy --fs-uuid --set=root 2b98da33-5663-4b52-a2ed-821f8fcc60e8
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu 18.04.1 LTS (18.04) (sur /dev/sda1)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
	else
	  search --no-floppy --fs-uuid --set=root 3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
	fi
	linux /boot/vmlinuz-4.15.0-29-generic root=UUID=3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-4.15.0-29-generic
}
submenu 'Options avancées pour Ubuntu 18.04.1 LTS (18.04) (sur /dev/sda1)' $menuentry_id_option 'osprober-gnulinux-advanced-3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2' {
	menuentry 'Ubuntu (sur /dev/sda1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-29-generic--3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
		else
		  search --no-floppy --fs-uuid --set=root 3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
		fi
		linux /boot/vmlinuz-4.15.0-29-generic root=UUID=3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-29-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-29-generic (sur /dev/sda1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-29-generic--3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
		else
		  search --no-floppy --fs-uuid --set=root 3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
		fi
		linux /boot/vmlinuz-4.15.0-29-generic root=UUID=3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-29-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-29-generic (recovery mode) (sur /dev/sda1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-29-generic-root=UUID=3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2 ro recovery nomodeset-3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
		else
		  search --no-floppy --fs-uuid --set=root 3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2
		fi
		linux /boot/vmlinuz-4.15.0-29-generic root=UUID=3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2 ro recovery nomodeset
		initrd /boot/initrd.img-4.15.0-29-generic
	}
}

menuentry 'Linux Mint 19 Tara (19) (sur /dev/sda3)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-d0e7bc4e-eab9-4c63-bfc6-cca250fbd474' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
	else
	  search --no-floppy --fs-uuid --set=root d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
	fi
	linux /boot/vmlinuz-4.15.0-20-generic root=UUID=d0e7bc4e-eab9-4c63-bfc6-cca250fbd474 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-4.15.0-20-generic
}
submenu 'Options avancées pour Linux Mint 19 Tara (19) (sur /dev/sda3)' $menuentry_id_option 'osprober-gnulinux-advanced-d0e7bc4e-eab9-4c63-bfc6-cca250fbd474' {
	menuentry 'Linux Mint 19 Cinnamon (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-20-generic--d0e7bc4e-eab9-4c63-bfc6-cca250fbd474' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
		else
		  search --no-floppy --fs-uuid --set=root d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
		fi
		linux /boot/vmlinuz-4.15.0-20-generic root=UUID=d0e7bc4e-eab9-4c63-bfc6-cca250fbd474 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-20-generic
	}
	menuentry 'Linux Mint 19 Cinnamon, avec Linux 4.15.0-20-generic (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-20-generic--d0e7bc4e-eab9-4c63-bfc6-cca250fbd474' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
		else
		  search --no-floppy --fs-uuid --set=root d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
		fi
		linux /boot/vmlinuz-4.15.0-20-generic root=UUID=d0e7bc4e-eab9-4c63-bfc6-cca250fbd474 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-20-generic
	}
	menuentry 'Linux Mint 19 Cinnamon, with Linux 4.15.0-20-generic (recovery mode) (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-20-generic-root=UUID=d0e7bc4e-eab9-4c63-bfc6-cca250fbd474 ro recovery nomodeset-d0e7bc4e-eab9-4c63-bfc6-cca250fbd474' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
		else
		  search --no-floppy --fs-uuid --set=root d0e7bc4e-eab9-4c63-bfc6-cca250fbd474
		fi
		linux /boot/vmlinuz-4.15.0-20-generic root=UUID=d0e7bc4e-eab9-4c63-bfc6-cca250fbd474 ro recovery nomodeset
		initrd /boot/initrd.img-4.15.0-20-generic
	}
}

menuentry 'Ubuntu 12.04.5 LTS (12.04) (sur /dev/sdb1)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-59dd2d22-8c0f-40af-af59-42cfd4749a16' {
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
	else
	  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
	fi
	linux /boot/vmlinuz-3.2.0-126-generic-pae root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.2.0-126-generic-pae
}
submenu 'Options avancées pour Ubuntu 12.04.5 LTS (12.04) (sur /dev/sdb1)' $menuentry_id_option 'osprober-gnulinux-advanced-59dd2d22-8c0f-40af-af59-42cfd4749a16' {
	menuentry 'Ubuntu, avec Linux 3.2.0-126-generic-pae (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-126-generic-pae--59dd2d22-8c0f-40af-af59-42cfd4749a16' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
		else
		  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
		fi
		linux /boot/vmlinuz-3.2.0-126-generic-pae root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.2.0-126-generic-pae
	}
	menuentry 'Ubuntu, with Linux 3.2.0-126-generic-pae (recovery mode) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-126-generic-pae-root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset-59dd2d22-8c0f-40af-af59-42cfd4749a16' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
		else
		  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
		fi
		linux /boot/vmlinuz-3.2.0-126-generic-pae root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset
		initrd /boot/initrd.img-3.2.0-126-generic-pae
	}
	menuentry 'Ubuntu, avec Linux 3.2.0-126-generic (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-126-generic--59dd2d22-8c0f-40af-af59-42cfd4749a16' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
		else
		  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
		fi
		linux /boot/vmlinuz-3.2.0-126-generic root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.2.0-126-generic
	}
	menuentry 'Ubuntu, with Linux 3.2.0-126-generic (recovery mode) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-126-generic-root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset-59dd2d22-8c0f-40af-af59-42cfd4749a16' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
		else
		  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
		fi
		linux /boot/vmlinuz-3.2.0-126-generic root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset
		initrd /boot/initrd.img-3.2.0-126-generic
	}
	menuentry 'Ubuntu, avec Linux 3.2.0-37-generic (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-37-generic--59dd2d22-8c0f-40af-af59-42cfd4749a16' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
		else
		  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
		fi
		linux /boot/vmlinuz-3.2.0-37-generic root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.2.0-37-generic
	}
	menuentry 'Ubuntu, with Linux 3.2.0-37-generic (recovery mode) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-37-generic-root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset-59dd2d22-8c0f-40af-af59-42cfd4749a16' {
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  59dd2d22-8c0f-40af-af59-42cfd4749a16
		else
		  search --no-floppy --fs-uuid --set=root 59dd2d22-8c0f-40af-af59-42cfd4749a16
		fi
		linux /boot/vmlinuz-3.2.0-37-generic root=UUID=59dd2d22-8c0f-40af-af59-42cfd4749a16 ro recovery nomodeset
		initrd /boot/initrd.img-3.2.0-37-generic
	}
}

set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb2 during installation
UUID=2b98da33-5663-4b52-a2ed-821f8fcc60e8 /               ext4    errors=remount-ro 0       1
# /STOCK was on /dev/sda4 during installation
UUID=4e1148c8-479f-4c02-90cf-9181623871cb /STOCK          ext4    defaults        0       2
# swap was on /dev/sda2 during installation
UUID=d6e37550-8a1b-48ca-95c5-30e1e365261f none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sdb2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 207.920310974 = 223.252733952  boot/grub/grub.cfg                             1
 208.040176392 = 223.381438464  boot/grub/i386-pc/core.img                     1
 171.918182373 = 184.595742720  boot/vmlinuz-4.15.0-20-generic                 1
 171.918182373 = 184.595742720  vmlinuz                                        1
 170.034282684 = 182.572920832  boot/initrd.img-4.15.0-20-generic              3
 170.034282684 = 182.572920832  initrd.img                                     3
 170.034282684 = 182.572920832  initrd.img.old                                 3

========= Devices which don't seem to have a corresponding hard drive: =========

sdc 

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/7439/mountinfo) leaked on lvs invocation. Parent PID 19286: bash
File descriptor 63 (pipe:[98168]) leaked on lvs invocation. Parent PID 19286: bash

ADDITIONAL INFORMATION :
=================== log of boot-info 20190819_2000 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in live-session (Ubuntu 18.04.1 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash --- debian-installer/language=fr keyboard-configuration/layoutcode?=fr keyboard-configuration/variantcode?=oss
ls: impossible d'accéder à '/home/usr/.config': Aucun fichier ou dossier de ce type
mount: /mnt/boot-sav/sda4 : impossible de lire le superbloc à l’adresse /dev/sda4.
mount /dev/sda4 : Error code 32
mount -r /dev/sda4 /mnt/boot-sav/sda4
mount: /mnt/boot-sav/sda4 : impossible de lire le superbloc à l’adresse /dev/sda4.
mount -r /dev/sda4 : Error code 32

=================== os-prober:
/dev/sda1:Ubuntu 18.04.1 LTS (18.04):Ubuntu:linux
/dev/sda3:Linux Mint 19 Tara (19):LinuxMint:linux
/dev/sdb1:Ubuntu 12.04.5 LTS (12.04):Ubuntu1:linux
/dev/sdb2:Linux Mint 19 Tara (19):LinuxMint1:linux

=================== blkid:
/dev/sda1: UUID="3dc9dfc0-a8d7-4737-a9f0-d06f9731aae2" TYPE="ext4" PARTUUID="000a5c21-01"
/dev/sda3: UUID="d0e7bc4e-eab9-4c63-bfc6-cca250fbd474" TYPE="ext4" PARTUUID="000a5c21-03"
/dev/sda4: UUID="4e1148c8-479f-4c02-90cf-9181623871cb" TYPE="ext4" PARTUUID="000a5c21-04"
/dev/sdb1: UUID="59dd2d22-8c0f-40af-af59-42cfd4749a16" TYPE="ext4" PARTUUID="0000085f-01"
/dev/sdb2: UUID="2b98da33-5663-4b52-a2ed-821f8fcc60e8" TYPE="ext4" PARTUUID="0000085f-02"
/dev/sr0: UUID="2018-07-25-03-21-56-00" LABEL="Ubuntu 18.04.1 LTS amd64" TYPE="iso9660" PTUUID="663eb4c4" PTTYPE="dos"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda2: UUID="d6e37550-8a1b-48ca-95c5-30e1e365261f" TYPE="swap" PARTUUID="000a5c21-02"


2 disks with OS, 4 OS : 4 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

mount: /mnt/boot-sav/sda4 : impossible de lire le superbloc à l’adresse /dev/sda4.
mount /dev/sda4 : Error code 32
mount -r /dev/sda4 /mnt/boot-sav/sda4
mount: /mnt/boot-sav/sda4 : impossible de lire le superbloc à l’adresse /dev/sda4.
mount -r /dev/sda4 : Error code 32

=================== sda1/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 juil. 25  2018 grub.d
total 80
-rwxr-xr-x 1 root root  9783 juil. 17  2018 00_header
-rwxr-xr-x 1 root root  6258 juil. 16  2018 05_debian_theme
-rwxr-xr-x 1 root root 12693 juil. 17  2018 10_linux
-rwxr-xr-x 1 root root 11298 juil. 17  2018 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 juil. 17  2018 30_os-prober
-rwxr-xr-x 1 root root  1418 juil. 17  2018 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juil. 17  2018 40_custom
-rwxr-xr-x 1 root root   216 juil. 17  2018 41_custom
-rw-r--r-- 1 root root   483 juil. 17  2018 README




=================== sda1/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== sda3/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 juil. 17  2018 grub.d
total 80
-rwxr-xr-x 1 root root  9783 mars   4  2018 00_header
-rwxr-xr-x 1 root root  6258 mars   4  2018 05_debian_theme
-rwxr-xr-x 1 root root 12693 mars   4  2018 10_linux
-rwxr-xr-x 1 root root 11298 mars   4  2018 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 mars   4  2018 30_os-prober
-rwxr-xr-x 1 root root  1418 mars   4  2018 30_uefi-firmware
-rwxr-xr-x 1 root root   214 mars   4  2018 40_custom
-rwxr-xr-x 1 root root   216 mars   4  2018 41_custom
-rw-r--r-- 1 root root   483 mars   4  2018 README




=================== sda3/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== sdb1/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 sept.  3  2018 grub.d
total 60
-rwxr-xr-x 1 root root 7806 juil.  9  2016 00_header
-rwxr-xr-x 1 root root 5522 janv. 22  2013 05_debian_theme
-rwxr-xr-x 1 root root 7877 juil.  9  2016 10_linux
-rwxr-xr-x 1 root root 6449 juil.  9  2016 20_linux_xen
-rwxr-xr-x 1 root root 1588 nov.  27  2011 20_memtest86+
-rwxr-xr-x 1 root root 6675 juil.  9  2016 30_os-prober
-rwxr-xr-x 1 root root 1388 janv. 22  2013 30_uefi-firmware
-rwxr-xr-x 1 root root  214 janv. 22  2013 40_custom
-rwxr-xr-x 1 root root   95 janv. 22  2013 41_custom
-rw-r--r-- 1 root root  483 janv. 22  2013 README




=================== sdb1/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== sdb2/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 avril 22 08:49 grub.d
total 80
-rwxr-xr-x 1 root root 10046 mars  18 16:11 00_header
-rwxr-xr-x 1 root root  6258 mars   4  2018 05_debian_theme
-rwxr-xr-x 1 root root 12693 mars   4  2018 10_linux
-rwxr-xr-x 1 root root 11298 mars   4  2018 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 mars   4  2018 30_os-prober
-rwxr-xr-x 1 root root  1418 mars   4  2018 30_uefi-firmware
-rwxr-xr-x 1 root root   214 mars   4  2018 40_custom
-rwxr-xr-x 1 root root   216 mars   4  2018 41_custom
-rw-r--r-- 1 root root   483 mars   4  2018 README




=================== sdb2/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== sdb2recordfail=1/grub/grubenv :
recordfail=1




=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sda1.
sda3	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sda3.
sda4	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda4.
sdb1	: sdb,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	32,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sdb1.
sdb2	: sdb,	not-sepboot,	grubenv-ng	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sdb2.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes
sdb	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:500GB:scsi:512:4096:msdos:ATA TOSHIBA DT01ACA0:;
1:1049kB:37.3GB:37.3GB:ext4::boot;
3:37.3GB:74.5GB:37.2GB:ext4::;
4:74.5GB:491GB:417GB:ext4::;
2:491GB:500GB:9002MB:linux-swap(v1)::;

BYT;
/dev/sdb:240GB:scsi:512:512:msdos:ATA KINGSTON SA400S3:;
1:1049kB:120GB:120GB:ext4::boot;
2:120GB:240GB:120GB:ext4::;

BYT;
/dev/sr0:1954MB:scsi:2048:2048:mac:HL-DT-ST DVDRAM GH24NS95:;
1:2048B:6143B:4096B::Apple:;
2:1913MB:1916MB:2392kB::EFI:;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
loop0 loop squashfs   1,8G
loop1 loop squashfs  86,9M
loop2 loop squashfs  34,7M
loop3 loop squashfs 140,9M
loop4 loop squashfs   2,3M
loop5 loop squashfs    13M
loop6 loop squashfs  14,5M
loop7 loop squashfs   3,7M
sda   disk          465,8G
sda1  part ext4      34,8G
sda2  part swap       8,4G
sda3  part ext4      34,7G
sda4  part ext4       388G
sdb   disk          223,6G
sdb1  part ext4     111,8G
sdb2  part ext4     111,8G
sr0   rom  iso9660    1,8G Ubuntu 18.04.1 LTS amd64

KNAME ROTA RO RM STATE   MOUNTPOINT
loop0    1  1  0         /rofs
loop1    1  1  0         /snap/core/4917
loop2    1  1  0         /snap/gtk-common-themes/319
loop3    1  1  0         /snap/gnome-3-26-1604/70
loop4    1  1  0         /snap/gnome-calculator/180
loop5    1  1  0         /snap/gnome-characters/103
loop6    1  1  0         /snap/gnome-logs/37
loop7    1  1  0         /snap/gnome-system-monitor/51
sda      1  0  0 running
sda1     1  0  0         /mnt/boot-sav/sda1
sda2     1  0  0         [SWAP]
sda3     1  0  0         /mnt/boot-sav/sda3
sda4     1  0  0
sdb      0  0  0 running
sdb1     0  0  0         /mnt/boot-sav/sdb1
sdb2     0  0  0         /mnt/boot-sav/sdb2
sr0      1  0  1 running /cdrom


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1944556k,nr_inodes=486139,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=393148k,mode=755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime,nojoliet,check=s,map=n,blocksize=2048)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=25,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=14734)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=393144k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/var/lib/snapd/snaps/core_4917.snap on /snap/core/4917 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_319.snap on /snap/gtk-common-themes/319 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_70.snap on /snap/gnome-3-26-1604/70 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_180.snap on /snap/gnome-calculator/180 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_103.snap on /snap/gnome-characters/103 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_37.snap on /snap/gnome-logs/37 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_51.snap on /snap/gnome-system-monitor/51 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw,relatime,data=ordered)
/dev/sda3 on /mnt/boot-sav/sda3 type ext4 (rw,relatime,data=ordered)
/dev/sdb1 on /mnt/boot-sav/sdb1 type ext4 (rw,relatime,data=ordered)
/dev/sdb2 on /mnt/boot-sav/sdb2 type ext4 (rw,relatime,data=ordered)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 sda3 sda4 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 initctl input kmsg kvm lightnvm log lp0 mapper mcelog mei0 mem memory_bandwidth mqueue net network_latency network_throughput null parport0 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sdb sdb1 sdb2 sdc sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio vfio vga_arbiter vhci vhost-net vhost-vsock zero
ls /dev/mapper:  control

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     384M  1.5M  383M   1% /run
/dev/sr0       iso9660   1.9G  1.9G     0 100% /cdrom
/dev/loop0     squashfs  1.8G  1.8G     0 100% /rofs
/cow           overlay   1.9G  461M  1.5G  24% /
tmpfs          tmpfs     1.9G   46M  1.9G   3% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
tmpfs          tmpfs     1.9G  528K  1.9G   1% /tmp
tmpfs          tmpfs     384M   48K  384M   1% /run/user/999
/dev/loop1     squashfs   87M   87M     0 100% /snap/core/4917
/dev/loop2     squashfs   35M   35M     0 100% /snap/gtk-common-themes/319
/dev/loop3     squashfs  141M  141M     0 100% /snap/gnome-3-26-1604/70
/dev/loop4     squashfs  2.4M  2.4M     0 100% /snap/gnome-calculator/180
/dev/loop5     squashfs   13M   13M     0 100% /snap/gnome-characters/103
/dev/loop6     squashfs   15M   15M     0 100% /snap/gnome-logs/37
/dev/loop7     squashfs  3.8M  3.8M     0 100% /snap/gnome-system-monitor/51
/dev/sda1      ext4       34G  6.7G   26G  21% /mnt/boot-sav/sda1
/dev/sda3      ext4       34G  8.0G   25G  25% /mnt/boot-sav/sda3
/dev/sdb1      ext4      110G   66G   40G  63% /mnt/boot-sav/sdb1
/dev/sdb2      ext4      110G   59G   46G  56% /mnt/boot-sav/sdb2

=================== fdisk -l:
Disk /dev/loop0: 1.8 GiB, 1864450048 bytes, 3641504 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 86.9 MiB, 91099136 bytes, 177928 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 34.7 MiB, 36323328 bytes, 70944 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop3: 140.9 MiB, 147722240 bytes, 288520 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop4: 2.3 MiB, 2433024 bytes, 4752 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop5: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop6: 14.5 MiB, 15196160 bytes, 29680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop7: 3.7 MiB, 3887104 bytes, 7592 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x000a5c21

Device     Boot     Start       End   Sectors  Size Id Type
/dev/sda1  *         2048  72900485  72898438 34.8G 83 Linux
/dev/sda2       959191040 976773167  17582128  8.4G 82 Linux swap / Solaris
/dev/sda3        72900608 145575935  72675328 34.7G 83 Linux
/dev/sda4       145575936 959191039 813615104  388G 83 Linux

Partition table entries are not in disk order.


Disk /dev/sdb: 223.6 GiB, 240057409536 bytes, 468862128 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0000085f

Device     Boot     Start       End   Sectors   Size Id Type
/dev/sdb1  *         2048 234414079 234412032 111.8G 83 Linux
/dev/sdb2       234414080 468860927 234446848 111.8G 83 Linux


Gtk-Message: 20:01:26.291: GtkDialog mapped without a transient parent. This is discouraged.
User choice: Est-ce que sda (ATA TOSHIBA DT01ACA0) est un disque amovible ? no


/usr/share/boot-sav/gui-tab-other.sh: ligne 93: _checkbutton_repairfilesystems : commande introuvable


=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBRs of all disks (except live-disks and removable disks without OS).
Additional repair would be performed: unhide-bootmenu-10s repair-filesystems


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (ATA TOSHIBA DT01ACA0) !


=================== User settings
The settings chosen by the user will not act on the boot.

Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 18.04.1 LTS - Lenovo T410 -Toshiba Satellite A300  Membre de Linux-Azur

En ligne

#14 Aujourd'hui à 22:16

Naziel

Re : [fstab et Emergency mode] Disparition !

Que je comprenne bien: tu as 4 OS linux installés?
On est bien d'accord que tu n'as pas accès aux données depuis un live usb?


[ poster correctement un retour de commande ] [ poster correctement une photo ]
Nouvel adhérent FDN
thinkpad x220, Thinkstation E32 modifié: i5-4570, GTX 1060 6 Gb, 16 Gb de RAM, ...
Pour reprendre le contrôle des semences: https://kokopelli-semences.fr/fr/

En ligne