#1 Le 01/03/2024, à 12:44
- nazonfly
[Résolu] Impossible de démarrer session graphique
Bonjour
Après un jour et demi à tenter de trouver ce qui cloche et à faire diverses manips, je me résous à vous demander un peu d'aide.
Suite à un démarrage tout à fait normal, j'ai été dans l'impossibilité d'avoir une interface graphique autre qu'en recovery mode. J'ai eu l'impression que c'était un problème de drivers graphiques donc je suis passé seulement avec nouveau et j'ai enlevé les drivers nvidia en espérant que ça fonctionne (échec).
J'ai tenté de passer de mon Ubuntu 22.04 à 23.10 (échec).
J'ai lancé une clé USB live 18.04 pour voir s'il n'y avait pas un problème matériel : aucun souci de ce côté-là apparemment.
J'ai aussi tenté de réinstaller X, de reconfigurer mais là j'arrive au bout des bidouilles piquées ici et là. J'ai vu quelques réponses évoquant une éventuelle nécessité de mettre à jour le BIOS mais je ne suis pas 100% convaincu.
Quelques infos :
inxi -F
System:
Host: Hvergelmir Kernel: 6.2.0-39-generic arch: x86_64 bits: 64
Desktop: GNOME v: 45.2 Distro: Ubuntu 23.10 (Mantic Minotaur)
Machine:
Type: Laptop System: Notebook product: P7xxDM(-G) v: N/A
serial: <superuser required>
Graphics:
Device-1: NVIDIA GM204M [GeForce GTX 980M] driver: N/A
Device-2: Acer BisonCam NB Pro driver: uvcvideo type: USB
Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 23.2.0 driver: X:
loaded: nouveau,vesa unloaded: fbdev,modesetting dri: swrast gpu: N/A
resolution: 1024x768
API: OpenGL v: 4.5 Mesa 23.2.1-1ubuntu3.1 renderer: llvmpipe (LLVM 15.0.7
256 bits)(sachant que j'ai aussi un noyau 6.5.0-21 qui ne boote pas et reste bloqué sur smpboot, mais les nouveaux noyaux ont parfois un peu besoin de temps avant d'être adaptés sur ce LDLC/Clevo)
lshw -C
*-display NON-RÉCLAMÉ
description: VGA compatible controller
produit: GM204M [GeForce GTX 980M]
fabricant: NVIDIA Corporation
identifiant matériel: 0
information bus: pci@0000:01:00.0
version: a1
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list
configuration : latency=0
ressources : mémoire:db000000-dbffffff mémoire:b0000000-bfffffff mémoire:c0000000-c1ffffff portE/S:e000(taille=128) mémoire:c0000-dffff
*-graphics
produit: VESA VGA
identifiant matériel: 1
nom logique: /dev/fb0
fonctionnalités: fb
configuration : depth=32 resolution=640,480less /var/log/Xorg.0.log
[ 35.400] (--) Log file renamed from "/var/log/Xorg.pid-3470.log" to "/var/log/Xorg.0.log"
[ 35.400]
X.Org X Server 1.21.1.7
X Protocol Version 11, Revision 0
[ 35.400] Current Operating System: Linux Hvergelmir 6.2.0-39-generic #40~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Thu Nov 16 10:53:04 UTC 2 x86_64
[ 35.400] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.2.0-39-generic root=UUID=bf8aa1eb-eb90-4f38-933f-94c5c426d4a0 ro splash nosgx vt.handoff=7
[ 35.400] xorg-server 2:21.1.7-3ubuntu2.7 (For technical support please see http://www.ubuntu.com/support)
[ 35.400] Current version of pixman: 0.42.2
[ 35.400] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 35.400] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 35.400] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 1 10:31:10 2024
[ 35.401] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 35.401] (==) No Layout section. Using the first Screen section.
[ 35.401] (==) No screen section available. Using defaults.
[ 35.401] (**) |-->Screen "Default Screen Section" (0)
[ 35.401] (**) | |-->Monitor "<default monitor>"
[ 35.401] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 35.401] (==) Automatically adding devices
[ 35.401] (==) Automatically enabling devices
[ 35.401] (==) Automatically adding GPU devices
[ 35.401] (==) Automatically binding GPU devices
[ 35.401] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 35.401] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 35.401] Entry deleted from font path.
[ 35.401] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 35.401] Entry deleted from font path.
[ 35.401] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 35.401] Entry deleted from font path.
[ 35.401] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
built-ins
[ 35.401] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 35.401] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 35.401] (II) Loader magic: 0x56540814e020
[ 35.401] (II) Module ABI versions:
[ 35.401] X.Org ANSI C Emulation: 0.4
[ 35.401] X.Org Video Driver: 25.2
[ 35.401] X.Org XInput driver : 24.4
[ 35.401] X.Org Server Extension : 10.0
[ 35.402] (++) using VT number 1
[ 35.403] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c6
[ 35.405] (--) PCI:*(1@0:0:0) 10de:1617:1558:7703 rev 161, Mem @ 0xdb000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 35.405] (II) LoadModule: "glx"
[ 35.405] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 35.406] (II) Module glx: vendor="X.Org Foundation"
[ 35.406] compiled for 1.21.1.7, module version = 1.0.0
[ 35.406] ABI class: X.Org Server Extension, version 10.0
[ 35.538] (==) Matched nouveau as autoconfigured driver 0
[ 35.538] (==) Matched modesetting as autoconfigured driver 1
[ 35.538] (==) Matched fbdev as autoconfigured driver 2
[ 35.538] (==) Matched vesa as autoconfigured driver 3
[ 35.538] (==) Assigned the driver to the xf86ConfigLayout
[ 35.539] (II) LoadModule: "nouveau"
[ 35.539] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 35.540] (II) Module nouveau: vendor="X.Org Foundation"
[ 35.540] compiled for 1.21.1.3, module version = 1.0.17
[ 35.540] Module class: X.Org Video Driver
[ 35.540] ABI class: X.Org Video Driver, version 25.2
[ 35.540] (II) LoadModule: "modesetting"
[ 35.540] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 35.540] (II) Module modesetting: vendor="X.Org Foundation"
[ 35.541] compiled for 1.21.1.7, module version = 1.21.1
[ 35.541] Module class: X.Org Video Driver
[ 35.541] ABI class: X.Org Video Driver, version 25.2
[ 35.541] (II) LoadModule: "fbdev"
[ 35.541] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 35.541] (II) Module fbdev: vendor="X.Org Foundation"
[ 35.541] compiled for 1.21.1.3, module version = 0.5.0
[ 35.541] Module class: X.Org Video Driver
[ 35.541] ABI class: X.Org Video Driver, version 25.2
[ 35.542] (II) LoadModule: "vesa"
[ 35.542] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 35.542] (II) Module vesa: vendor="X.Org Foundation"
[ 35.542] compiled for 1.21.1.3, module version = 2.5.0
[ 35.542] Module class: X.Org Video Driver
[ 35.542] ABI class: X.Org Video Driver, version 25.2
[ 35.542] (II) NOUVEAU driver Date: Sat Jan 23 12:24:42 2021 -0500
[ 35.542] (II) NOUVEAU driver for NVIDIA chipset families :
[ 35.542] RIVA TNT (NV04)
[ 35.543] RIVA TNT2 (NV05)
[ 35.543] GeForce 256 (NV10)
[ 35.543] GeForce 2 (NV11, NV15)
[ 35.544] GeForce 4MX (NV17, NV18)
[ 35.544] GeForce 3 (NV20)
[ 35.544] GeForce 4Ti (NV25, NV28)
[ 35.544] GeForce FX (NV3x)
[ 35.545] GeForce 6 (NV4x)
[ 35.545] GeForce 7 (G7x)
[ 35.545] GeForce 8 (G8x)
[ 35.545] GeForce 9 (G9x)
[ 35.546] GeForce GTX 2xx/3xx (GT2xx)
[ 35.546] GeForce GTX 4xx/5xx (GFxxx)
[ 35.546] GeForce GTX 6xx/7xx (GKxxx)
[ 35.546] GeForce GTX 9xx (GMxxx)
[ 35.546] GeForce GTX 10xx (GPxxx)
[ 35.546] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 35.546] (II) FBDEV: driver for framebuffer: fbdev
[ 35.546] (II) VESA: driver for VESA chipsets: vesa
[ 35.676] (EE) [drm] Failed to open DRM device for pci:0000:01:00.0: -19
[ 35.676] (EE) open /dev/dri/card0: No such file or directory
[ 35.676] (WW) Falling back to old probe method for modesetting
[ 35.676] (EE) open /dev/dri/card0: No such file or directory
[ 35.676] (II) Loading sub module "fbdevhw"
[ 35.676] (II) LoadModule: "fbdevhw"
[ 35.676] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 35.676] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 35.677] compiled for 1.21.1.7, module version = 0.0.2
[ 35.677] ABI class: X.Org Video Driver, version 25.2
[ 35.677] (EE) Unable to find a valid framebuffer device
[ 35.677] (WW) Falling back to old probe method for fbdev
[ 35.677] (II) Loading sub module "fbdevhw"
[ 35.677] (II) LoadModule: "fbdevhw"
[ 35.677] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 35.677] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 35.677] compiled for 1.21.1.7, module version = 0.0.2
[ 35.677] ABI class: X.Org Video Driver, version 25.2
[ 35.677] (II) FBDEV(2): using default device
[ 35.678] (EE) Screen 0 deleted because of no matching config section.
[ 35.678] (II) UnloadModule: "modesetting"
[ 35.678] (EE) Screen 0 deleted because of no matching config section.
[ 35.678] (II) UnloadModule: "fbdev"
[ 35.678] (II) UnloadSubModule: "fbdevhw"
[ 35.678] (EE)
Fatal server error:
[ 35.678] (EE) Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices
[ 35.678] (EE)
[ 35.678] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 35.678] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 35.678] (EE)
[ 35.706] (EE) Server terminated with error (1). Closing log file.lsmod | grep nouveau(module non chargé ?)
dmesg
[ 0.000000] microcode: microcode updated early to revision 0xf0, date = 2021-11-12
[ 0.000000] Linux version 6.2.0-39-generic (buildd@lcy02-amd64-045) (x86_64-linux-gnu-gcc-11 (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #40~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Thu Nov 16 10:53:04 UTC 2 (Ubuntu 6.2.0-39.40~22.04.1-generic 6.2.16)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.2.0-39-generic root=UUID=bf8aa1eb-eb90-4f38-933f-94c5c426d4a0 ro splash nosgx vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000343c0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000343c1000-0x00000000343c1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000343c2000-0x000000003440bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003440c000-0x000000003445efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003445f000-0x000000003486ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000034870000-0x0000000036a06fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000036a07000-0x0000000037395fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000037396000-0x000000003754efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003754f000-0x0000000037b9cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000037b9d000-0x0000000037ffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000037fff000-0x0000000037ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000038000000-0x00000000380fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000008c67fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: Notebook P7xxDM(-G) /P7xxDM(-G) , BIOS 1.05.04 10/05/2015
[ 0.000000] tsc: Detected 4000.000 MHz processor
[ 0.000000] tsc: Detected 3999.984 MHz TSC
[ 0.000629] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000631] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000638] last_pfn = 0x8c6800 max_arch_pfn = 0x400000000
[ 0.000642] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000931] last_pfn = 0x38000 max_arch_pfn = 0x400000000
[ 0.006336] found SMP MP-table at [mem 0x000fcd90-0x000fcd9f]
[ 0.006347] Using GB pages for direct mapping
[ 0.006566] RAMDISK: [mem 0x30891000-0x343bffff]
[ 0.006600] ACPI: Early table checksum verification disabled
[ 0.006602] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ 0.006605] ACPI: XSDT 0x0000000037B65090 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006609] ACPI: FACP 0x0000000037B80100 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.006613] ACPI: DSDT 0x0000000037B651C0 01AF40 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.006616] ACPI: FACS 0x0000000037B9CF80 000040
[ 0.006618] ACPI: APIC 0x0000000037B80210 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.006620] ACPI: FPDT 0x0000000037B802D0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006622] ACPI: FIDT 0x0000000037B80318 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006625] ACPI: MCFG 0x0000000037B803B8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.006627] ACPI: HPET 0x0000000037B803F8 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
[ 0.006629] ACPI: SSDT 0x0000000037B80430 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.006632] ACPI: SSDT 0x0000000037B807A0 002D3E (v01 NvdRef NvdTabl 00001000 INTL 20120913)
[ 0.006634] ACPI: DBGP 0x0000000037B834E0 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.006636] ACPI: DBG2 0x0000000037B83518 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.006638] ACPI: SSDT 0x0000000037B83570 00160D (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.006641] ACPI: UEFI 0x0000000037B84B80 000042 (v01 00000000 00000000)
[ 0.006643] ACPI: SSDT 0x0000000037B84BC8 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.006645] ACPI: DMAR 0x0000000037B85A20 000070 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.006648] ACPI: ASF! 0x0000000037B85A90 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.006649] ACPI: Reserving FACP table memory at [mem 0x37b80100-0x37b8020b]
[ 0.006651] ACPI: Reserving DSDT table memory at [mem 0x37b651c0-0x37b800ff]
[ 0.006651] ACPI: Reserving FACS table memory at [mem 0x37b9cf80-0x37b9cfbf]
[ 0.006652] ACPI: Reserving APIC table memory at [mem 0x37b80210-0x37b802cb]
[ 0.006653] ACPI: Reserving FPDT table memory at [mem 0x37b802d0-0x37b80313]
[ 0.006653] ACPI: Reserving FIDT table memory at [mem 0x37b80318-0x37b803b3]
[ 0.006654] ACPI: Reserving MCFG table memory at [mem 0x37b803b8-0x37b803f3]
[ 0.006655] ACPI: Reserving HPET table memory at [mem 0x37b803f8-0x37b8042f]
[ 0.006655] ACPI: Reserving SSDT table memory at [mem 0x37b80430-0x37b8079c]
[ 0.006656] ACPI: Reserving SSDT table memory at [mem 0x37b807a0-0x37b834dd]
[ 0.006656] ACPI: Reserving DBGP table memory at [mem 0x37b834e0-0x37b83513]
[ 0.006657] ACPI: Reserving DBG2 table memory at [mem 0x37b83518-0x37b8356b]
[ 0.006658] ACPI: Reserving SSDT table memory at [mem 0x37b83570-0x37b84b7c]
[ 0.006658] ACPI: Reserving UEFI table memory at [mem 0x37b84b80-0x37b84bc1]
[ 0.006659] ACPI: Reserving SSDT table memory at [mem 0x37b84bc8-0x37b85a1f]
[ 0.006659] ACPI: Reserving DMAR table memory at [mem 0x37b85a20-0x37b85a8f]
[ 0.006660] ACPI: Reserving ASF! table memory at [mem 0x37b85a90-0x37b85b34]
[ 0.006854] No NUMA configuration found
[ 0.006855] Faking a node at [mem 0x0000000000000000-0x00000008c67fffff]
[ 0.006862] NODE_DATA(0) allocated [mem 0x8c67d5000-0x8c67fffff]
[ 0.007021] Zone ranges:
[ 0.007021] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007023] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.007024] Normal [mem 0x0000000100000000-0x00000008c67fffff]
[ 0.007025] Device empty
[ 0.007026] Movable zone start for each node
[ 0.007027] Early memory node ranges
[ 0.007028] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.007029] node 0: [mem 0x0000000000100000-0x00000000343c0fff]
[ 0.007030] node 0: [mem 0x000000003440c000-0x000000003445efff]
[ 0.007030] node 0: [mem 0x0000000034870000-0x0000000036a06fff]
[ 0.007031] node 0: [mem 0x0000000037396000-0x000000003754efff]
[ 0.007032] node 0: [mem 0x0000000037fff000-0x0000000037ffffff]
[ 0.007032] node 0: [mem 0x0000000100000000-0x00000008c67fffff]
[ 0.007035] Initmem setup node 0 [mem 0x0000000000001000-0x00000008c67fffff]
[ 0.007038] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.007054] On node 0, zone DMA: 100 pages in unavailable ranges
[ 0.008006] On node 0, zone DMA32: 75 pages in unavailable ranges
[ 0.008056] On node 0, zone DMA32: 1041 pages in unavailable ranges
[ 0.008075] On node 0, zone DMA32: 2447 pages in unavailable ranges
[ 0.008093] On node 0, zone DMA32: 2736 pages in unavailable ranges
[ 0.049837] On node 0, zone Normal: 6144 pages in unavailable ranges
[ 0.050006] ACPI: PM-Timer IO Port: 0x1808
[ 0.050011] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.050012] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.050013] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.050014] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.050014] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.050015] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.050015] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.050016] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.050041] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.050044] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.050045] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.050048] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.050049] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.050051] TSC deadline timer available
[ 0.050052] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.050064] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.050065] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.050066] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.050067] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.050067] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.050068] PM: hibernation: Registered nosave memory: [mem 0x343c1000-0x343c1fff]
[ 0.050069] PM: hibernation: Registered nosave memory: [mem 0x343c2000-0x3440bfff]
[ 0.050070] PM: hibernation: Registered nosave memory: [mem 0x3445f000-0x3486ffff]
[ 0.050071] PM: hibernation: Registered nosave memory: [mem 0x36a07000-0x37395fff]
[ 0.050073] PM: hibernation: Registered nosave memory: [mem 0x3754f000-0x37b9cfff]
[ 0.050073] PM: hibernation: Registered nosave memory: [mem 0x37b9d000-0x37ffefff]
[ 0.050075] PM: hibernation: Registered nosave memory: [mem 0x38000000-0x380fffff]
[ 0.050075] PM: hibernation: Registered nosave memory: [mem 0x38100000-0xdfffffff]
[ 0.050076] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.050076] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.050077] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.050077] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.050078] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.050078] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.050079] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.050080] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.050080] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.050081] [mem 0x38100000-0xdfffffff] available for PCI devices
[ 0.050082] Booting paravirtualized kernel on bare hardware
[ 0.050084] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.050089] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.050387] percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u262144
[ 0.050392] pcpu-alloc: s217088 r8192 d28672 u262144 alloc=1*2097152
[ 0.050394] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.050414] Fallback order for Node 0: 0
[ 0.050416] Built 1 zonelists, mobility grouping on. Total pages: 8245031
[ 0.050417] Policy zone: Normal
[ 0.050417] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.2.0-39-generic root=UUID=bf8aa1eb-eb90-4f38-933f-94c5c426d4a0 ro splash nosgx vt.handoff=7
[ 0.050478] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.2.0-39-generic", will be passed to user space.
[ 0.050510] random: crng init done
[ 0.053124] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.054425] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.054507] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.054512] software IO TLB: area num 8.
[ 0.115785] Memory: 32739232K/33504256K available (20480K kernel code, 4153K rwdata, 12724K rodata, 4764K init, 17540K bss, 764764K reserved, 0K cma-reserved)
[ 0.115872] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.115880] Kernel/User page tables isolation: enabled
[ 0.115903] ftrace: allocating 53408 entries in 209 pages
[ 0.123026] ftrace: allocated 209 pages with 4 groups
[ 0.123562] Dynamic Preempt: voluntary
[ 0.123588] rcu: Preemptible hierarchical RCU implementation.
[ 0.123588] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.123589] Trampoline variant of Tasks RCU enabled.
[ 0.123590] Rude variant of Tasks RCU enabled.
[ 0.123590] Tracing variant of Tasks RCU enabled.
[ 0.123591] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.123591] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.125650] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[ 0.125840] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.126006] spurious 8259A interrupt: IRQ7.
[ 0.126029] Console: colour dummy device 80x25
[ 0.126031] printk: console [tty0] enabled
[ 0.126245] ACPI: Core revision 20221020
[ 0.126405] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.126504] APIC: Switch to symmetric I/O mode setup
[ 0.126507] DMAR: Host address width 39
[ 0.126509] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.126514] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.126517] DMAR: RMRR base: 0x00000037100000 end: 0x0000003711ffff
[ 0.126520] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.126523] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[ 0.126524] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.126525] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.127899] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.127901] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.131826] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.150494] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x73509d9fa88, max_idle_ns: 881590914879 ns
[ 0.150501] Calibrating delay loop (skipped), value calculated using timer frequency.. 7999.96 BogoMIPS (lpj=15999936)
[ 0.150522] CPU0: Thermal monitoring enabled (TM1)
[ 0.150556] process: using mwait in idle threads
[ 0.150558] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.150560] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.150564] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.150568] Spectre V2 : Mitigation: IBRS
[ 0.150569] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.150571] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.150573] RETBleed: Mitigation: IBRS
[ 0.150575] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.150578] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 0.150580] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.150587] MDS: Mitigation: Clear CPU buffers
[ 0.150589] TAA: Mitigation: TSX disabled
[ 0.150590] MMIO Stale Data: Mitigation: Clear CPU buffers
[ 0.150595] SRBDS: Mitigation: Microcode
[ 0.150601] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.150605] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.150608] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.150610] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.150613] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.150616] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.150619] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.150621] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.150624] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.172480] Freeing SMP alternatives memory: 44K
[ 0.172485] pid_max: default: 32768 minimum: 301
[ 0.172511] LSM: initializing lsm=lockdown,capability,landlock,yama,integrity,apparmor
[ 0.172522] landlock: Up and running.
[ 0.172524] Yama: becoming mindful.
[ 0.172545] AppArmor: AppArmor initialized
[ 0.172592] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.172622] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.174351] smpboot: CPU0: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.174437] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.174440] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.174453] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.174456] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.174468] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.174470] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.174484] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.174498] ... version: 4
[ 0.174498] ... bit width: 48
[ 0.174498] ... generic registers: 4
[ 0.174498] ... value mask: 0000ffffffffffff
[ 0.174498] ... max period: 00007fffffffffff
[ 0.174498] ... fixed-purpose events: 3
[ 0.174498] ... event mask: 000000070000000f
[ 0.174498] signal: max sigframe size: 2032
[ 0.174498] Estimated ratio of average max frequency by base frequency (times 1024): 1024
[ 0.174498] rcu: Hierarchical SRCU implementation.
[ 0.174498] rcu: Max phase no-delay instances is 1000.
[ 0.174498] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.174498] smp: Bringing up secondary CPUs ...
[ 0.174498] x86: Booting SMP configuration:
[ 0.174498] .... node #0, CPUs: #1 #2 #3 #4
[ 0.178597] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.178597] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[ 0.178612] #5 #6 #7
[ 0.179052] smp: Brought up 1 node, 8 CPUs
[ 0.179052] smpboot: Max logical packages: 1
[ 0.179052] smpboot: Total of 8 processors activated (63999.74 BogoMIPS)
[ 0.183351] devtmpfs: initialized
[ 0.183351] x86/mm: Memory block size: 128MB
[ 0.184626] ACPI: PM: Registering ACPI NVS region [mem 0x343c1000-0x343c1fff] (4096 bytes)
[ 0.184626] ACPI: PM: Registering ACPI NVS region [mem 0x3754f000-0x37b9cfff] (6610944 bytes)
[ 0.184626] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.184626] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.184626] pinctrl core: initialized pinctrl subsystem
[ 0.184626] PM: RTC time: 09:02:18, date: 2024-03-01
[ 0.184626] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.186598] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ 0.186831] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.187061] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.187075] audit: initializing netlink subsys (disabled)
[ 0.187088] audit: type=2000 audit(1709283737.060:1): state=initialized audit_enabled=0 res=1
[ 0.187088] thermal_sys: Registered thermal governor 'fair_share'
[ 0.187088] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.187088] thermal_sys: Registered thermal governor 'step_wise'
[ 0.187088] thermal_sys: Registered thermal governor 'user_space'
[ 0.187088] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.187088] EISA bus registered
[ 0.187088] cpuidle: using governor ladder
[ 0.187088] cpuidle: using governor menu
[ 0.187088] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.187088] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.187088] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.187088] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as E820 entry
[ 0.187088] PCI: Using configuration type 1 for base access
[ 0.187088] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.187088] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.187088] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.187088] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.187088] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.187088] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.187088] fbcon: Taking over console
[ 0.187088] ACPI: Added _OSI(Module Device)
[ 0.187088] ACPI: Added _OSI(Processor Device)
[ 0.187088] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.187088] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.212012] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.214083] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.216917] ACPI: Dynamic OEM Table Load:
[ 0.216917] ACPI: SSDT 0xFFFF9E6A01138000 0007AA (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.219399] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.220628] ACPI: Dynamic OEM Table Load:
[ 0.220634] ACPI: SSDT 0xFFFF9E6A01832800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.222336] ACPI: Dynamic OEM Table Load:
[ 0.222342] ACPI: SSDT 0xFFFF9E6A0113F000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.223773] ACPI: Dynamic OEM Table Load:
[ 0.223778] ACPI: SSDT 0xFFFF9E6A002D8E00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.229029] ACPI: EC: EC started
[ 0.229032] ACPI: EC: interrupt blocked
[ 0.229611] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.229614] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[ 0.229618] ACPI: Interpreter enabled
[ 0.229649] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.229651] ACPI: Using IOAPIC for interrupt routing
[ 0.231071] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.231074] PCI: Using E820 reservations for host bridge windows
[ 0.231594] ACPI: Enabled 9 GPEs in block 00 to 7F
[ 0.250019] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.250027] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.250070] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.250074] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.250078] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR)
[ 0.251019] PCI host bridge to bus 0000:00
[ 0.251022] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.251025] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.251028] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.251031] pci_bus 0000:00: root bus resource [mem 0x38800000-0xdfffffff window]
[ 0.251034] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.251037] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.251055] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[ 0.251127] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.251177] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.251341] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.251365] pci 0000:00:14.0: reg 0x10: [mem 0xda110000-0xda11ffff 64bit]
[ 0.251438] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.251718] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.251742] pci 0000:00:14.2: reg 0x10: [mem 0xda12e000-0xda12efff 64bit]
[ 0.251866] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.251889] pci 0000:00:16.0: reg 0x10: [mem 0xda12d000-0xda12dfff 64bit]
[ 0.251959] pci 0000:00:16.0: PME# supported from D3hot
[ 0.252183] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.252200] pci 0000:00:17.0: reg 0x10: [mem 0xda128000-0xda129fff]
[ 0.252211] pci 0000:00:17.0: reg 0x14: [mem 0xda12c000-0xda12c0ff]
[ 0.252223] pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
[ 0.252234] pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
[ 0.252245] pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
[ 0.252256] pci 0000:00:17.0: reg 0x24: [mem 0xda12b000-0xda12b7ff]
[ 0.252292] pci 0000:00:17.0: PME# supported from D3hot
[ 0.252548] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[ 0.252628] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.253120] pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400
[ 0.253193] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.253667] pci 0000:00:1c.7: [8086:a117] type 01 class 0x060400
[ 0.253740] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.254213] pci 0000:00:1d.0: [8086:a11c] type 01 class 0x060400
[ 0.254286] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.254810] pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
[ 0.255147] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.255167] pci 0000:00:1f.2: reg 0x10: [mem 0xda124000-0xda127fff]
[ 0.255438] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.255468] pci 0000:00:1f.3: reg 0x10: [mem 0xda120000-0xda123fff 64bit]
[ 0.255511] pci 0000:00:1f.3: reg 0x20: [mem 0xda100000-0xda10ffff 64bit]
[ 0.255558] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.256059] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.256118] pci 0000:00:1f.4: reg 0x10: [mem 0xda12a000-0xda12a0ff 64bit]
[ 0.256190] pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
[ 0.256490] pci 0000:01:00.0: [10de:1617] type 00 class 0x030000
[ 0.256508] pci 0000:01:00.0: reg 0x10: [mem 0xdb000000-0xdbffffff]
[ 0.256524] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.256540] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[ 0.256552] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.256562] pci 0000:01:00.0: reg 0x30: [mem 0xdc000000-0xdc07ffff pref]
[ 0.256581] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.256651] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[ 0.256966] pci 0000:01:00.1: [10de:0fbb] type 00 class 0x040300
[ 0.256984] pci 0000:01:00.1: reg 0x10: [mem 0xdc080000-0xdc083fff]
[ 0.257114] pci 0000:00:01.0: ASPM: current common clock configuration is inconsistent, reconfiguring
[ 0.266546] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.266578] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.266582] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
[ 0.266586] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.266678] acpiphp: Slot [1] registered
[ 0.266683] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
[ 0.266689] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.266694] pci 0000:00:1c.0: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
[ 0.266787] pci 0000:3b:00.0: [1969:e0a1] type 00 class 0x020000
[ 0.266819] pci 0000:3b:00.0: reg 0x10: [mem 0xdc400000-0xdc43ffff 64bit]
[ 0.266834] pci 0000:3b:00.0: reg 0x18: [io 0xd000-0xd07f]
[ 0.266899] pci 0000:3b:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[ 0.266953] pci 0000:3b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.267060] pci 0000:00:1c.6: PCI bridge to [bus 3b]
[ 0.267064] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.267067] pci 0000:00:1c.6: bridge window [mem 0xdc400000-0xdc4fffff]
[ 0.267163] pci 0000:3c:00.0: [10ec:5250] type 00 class 0x080501
[ 0.267186] pci 0000:3c:00.0: reg 0x10: [mem 0xdc301000-0xdc301fff]
[ 0.267200] pci 0000:3c:00.0: reg 0x14: [mem 0xdc300000-0xdc300fff]
[ 0.267326] pci 0000:3c:00.0: supports D1 D2
[ 0.267328] pci 0000:3c:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.267457] pci 0000:00:1c.7: PCI bridge to [bus 3c]
[ 0.267462] pci 0000:00:1c.7: bridge window [mem 0xdc300000-0xdc3fffff]
[ 0.267577] pci 0000:3d:00.0: [8086:095a] type 00 class 0x028000
[ 0.267622] pci 0000:3d:00.0: reg 0x10: [mem 0xdc200000-0xdc201fff 64bit]
[ 0.267829] pci 0000:3d:00.0: PME# supported from D0 D3hot D3cold
[ 0.268028] pci 0000:00:1d.0: PCI bridge to [bus 3d]
[ 0.268033] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.269195] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.269257] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.269319] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.269379] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.269440] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ 0.269499] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 0.269559] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.269618] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.270168] ACPI: EC: interrupt unblocked
[ 0.270171] ACPI: EC: event unblocked
[ 0.270182] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.270184] ACPI: EC: GPE=0x3
[ 0.270186] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete
[ 0.270189] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[ 0.270252] iommu: Default domain type: Translated
[ 0.270252] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.270252] SCSI subsystem initialized
[ 0.270252] libata version 3.00 loaded.
[ 0.270252] ACPI: bus type USB registered
[ 0.270252] usbcore: registered new interface driver usbfs
[ 0.270252] usbcore: registered new interface driver hub
[ 0.270252] usbcore: registered new device driver usb
[ 0.270252] pps_core: LinuxPPS API ver. 1 registered
[ 0.270252] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.270252] PTP clock support registered
[ 0.270501] EDAC MC: Ver: 3.0.0
[ 0.270675] NetLabel: Initializing
[ 0.270677] NetLabel: domain hash size = 128
[ 0.270679] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.270694] NetLabel: unlabeled traffic allowed by default
[ 0.270706] mctp: management component transport protocol core
[ 0.270706] NET: Registered PF_MCTP protocol family
[ 0.270706] PCI: Using ACPI for IRQ routing
[ 0.293791] PCI: pci_cache_line_size set to 64 bytes
[ 0.293840] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[ 0.293842] e820: reserve RAM buffer [mem 0x343c1000-0x37ffffff]
[ 0.293843] e820: reserve RAM buffer [mem 0x3445f000-0x37ffffff]
[ 0.293844] e820: reserve RAM buffer [mem 0x36a07000-0x37ffffff]
[ 0.293845] e820: reserve RAM buffer [mem 0x3754f000-0x37ffffff]
[ 0.293846] e820: reserve RAM buffer [mem 0x8c6800000-0x8c7ffffff]
[ 0.293857] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.293857] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.293857] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.293857] vgaarb: loaded
[ 0.294716] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.294724] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.296779] clocksource: Switched to clocksource tsc-early
[ 0.303602] VFS: Disk quotas dquot_6.6.0
[ 0.303617] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.303727] AppArmor: AppArmor Filesystem Enabled
[ 0.303755] pnp: PnP ACPI init
[ 0.303951] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.303956] system 00:00: [io 0xffff] has been reserved
[ 0.303959] system 00:00: [io 0xffff] has been reserved
[ 0.303963] system 00:00: [io 0xffff] has been reserved
[ 0.303965] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.303968] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.303970] system 00:00: [io 0x3322-0x3323] has been reserved
[ 0.304048] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.304105] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.304467] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.304471] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.304474] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.304477] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.304479] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.304482] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.304485] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.304488] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.304491] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.304494] system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.304541] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.304545] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.304548] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.304551] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.304554] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.304556] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.304559] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.304803] system 00:08: [io 0xff00-0xfffe] has been reserved
[ 0.305849] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.305853] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.305856] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.306431] pnp: PnP ACPI: found 10 devices
[ 0.311884] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.311931] NET: Registered PF_INET protocol family
[ 0.312061] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.314224] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.314254] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.314379] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.314623] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.314824] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.314926] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[ 0.315003] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.315065] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.315128] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.315135] NET: Registered PF_XDP protocol family
[ 0.315143] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-3a] add_size 1000
[ 0.315153] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.315157] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.315161] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.315167] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
[ 0.315172] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.315181] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
[ 0.315184] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.315191] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.315196] pci 0000:00:1c.0: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
[ 0.315206] pci 0000:00:1c.6: PCI bridge to [bus 3b]
[ 0.315208] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.315215] pci 0000:00:1c.6: bridge window [mem 0xdc400000-0xdc4fffff]
[ 0.315227] pci 0000:00:1c.7: PCI bridge to [bus 3c]
[ 0.315234] pci 0000:00:1c.7: bridge window [mem 0xdc300000-0xdc3fffff]
[ 0.315245] pci 0000:00:1d.0: PCI bridge to [bus 3d]
[ 0.315252] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.315264] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.315267] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.315269] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.315272] pci_bus 0000:00: resource 7 [mem 0x38800000-0xdfffffff window]
[ 0.315275] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.315277] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.315280] pci_bus 0000:01: resource 1 [mem 0xdb000000-0xdc0fffff]
[ 0.315282] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.315285] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.315287] pci_bus 0000:02: resource 1 [mem 0xc4000000-0xda0fffff]
[ 0.315290] pci_bus 0000:02: resource 2 [mem 0x80000000-0xa1ffffff 64bit pref]
[ 0.315293] pci_bus 0000:3b: resource 0 [io 0xd000-0xdfff]
[ 0.315295] pci_bus 0000:3b: resource 1 [mem 0xdc400000-0xdc4fffff]
[ 0.315298] pci_bus 0000:3c: resource 1 [mem 0xdc300000-0xdc3fffff]
[ 0.315300] pci_bus 0000:3d: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 0.315639] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[ 0.315661] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.315674] PCI: CLS 0 bytes, default 64
[ 0.315713] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.315729] software IO TLB: mapped [mem 0x000000002c891000-0x0000000030891000] (64MB)
[ 0.315753] Trying to unpack rootfs image as initramfs...
[ 0.316225] Initialise system trusted keyrings
[ 0.316232] Key type blacklist registered
[ 0.316269] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[ 0.316281] zbud: loaded
[ 0.316436] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.316492] fuse: init (API version 7.38)
[ 0.316593] integrity: Platform Keyring initialized
[ 0.316597] integrity: Machine keyring initialized
[ 0.322164] Key type asymmetric registered
[ 0.322169] Asymmetric key parser 'x509' registered
[ 0.322185] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.322214] io scheduler mq-deadline registered
[ 0.323054] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.324306] ACPI: AC: AC Adapter [AC] (on-line)
[ 0.324355] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.324381] ACPI: button: Power Button [PWRB]
[ 0.324404] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.324422] ACPI: button: Sleep Button [SLPB]
[ 0.324444] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.324463] ACPI: button: Lid Switch [LID0]
[ 0.324485] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.324502] ACPI: button: Power Button [PWRF]
[ 0.324968] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.324973] ACPI: thermal: Thermal Zone [TZ0] (60 C)
[ 0.325086] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.325485] ACPI: battery: Slot [BAT0] (battery present)
[ 0.326423] Linux agpgart interface v0.103
[ 0.327860] loop: module loaded
[ 0.328039] tun: Universal TUN/TAP device driver, 1.6
[ 0.328064] PPP generic driver version 2.4.2
[ 0.328167] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12
[ 0.873073] i8042: Detected active multiplexing controller, rev 1.1
[ 0.874262] Freeing initrd memory: 60604K
[ 0.875444] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.875452] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.875486] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.875502] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.875516] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.875599] mousedev: PS/2 mouse device common for all mice
[ 0.875775] rtc_cmos 00:02: RTC can wake from S4
[ 0.876464] rtc_cmos 00:02: registered as rtc0
[ 0.876659] rtc_cmos 00:02: setting system clock to 2024-03-01T09:02:18 UTC (1709283738)
[ 0.876681] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram
[ 0.876691] i2c_dev: i2c /dev entries driver
[ 0.876991] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 0.877004] device-mapper: uevent: version 1.0.3
[ 0.877064] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[ 0.877090] platform eisa.0: Probing EISA bus 0
[ 0.877093] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.877096] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.877099] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.877101] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.877103] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.877106] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.877108] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.877111] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.877113] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.877115] platform eisa.0: EISA: Detected 0 cards
[ 0.877119] intel_pstate: Intel P-state driver initializing
[ 0.877459] intel_pstate: HWP enabled
[ 0.877740] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.877797] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.877801] vesafb: scrolling: redraw
[ 0.877802] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.877814] vesafb: framebuffer at 0xc1000000, mapped to 0x00000000ce42aa95, using 1216k, total 1216k
[ 0.877872] Console: switching to colour frame buffer device 80x30
[ 0.879774] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.896436] fb0: VESA VGA frame buffer device
[ 0.896843] intel_pmc_core INT33A1:00: initialized
[ 0.897308] drop_monitor: Initializing network drop monitor service
[ 0.918306] NET: Registered PF_INET6 protocol family
[ 0.934403] Segment Routing with IPv6
[ 0.943237] In-situ OAM (IOAM) with IPv6
[ 0.951994] NET: Registered PF_PACKET protocol family
[ 0.960780] Key type dns_resolver registered
[ 0.969951] microcode: Microcode Update Driver: v2.2.
[ 0.969956] IPI shorthand broadcast: enabled
[ 0.988335] sched_clock: Marking stable (986570360, 534696)->(994741100, -7636044)
[ 1.007039] registered taskstats version 1
[ 1.017253] Loading compiled-in X.509 certificates
[ 1.027821] Loaded X.509 cert 'Build time autogenerated kernel key: 50841dc75de9a7863417bc98ff2d6d89ba2c0eec'
[ 1.049793] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 1.073450] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 1.097672] blacklist: Loading compiled-in revocation X.509 certificates
[ 1.110220] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 1.135483] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
[ 1.161611] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
[ 1.187936] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
[ 1.214375] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
[ 1.241501] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
[ 1.269231] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
[ 1.297807] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
[ 1.327445] zswap: loaded using pool lzo/zbud
[ 1.340586] tsc: Refined TSC clocksource calibration: 4007.999 MHz
[ 1.357252] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39c5e149d3a, max_idle_ns: 440795336434 ns
[ 1.387179] clocksource: Switched to clocksource tsc
[ 1.388663] Key type .fscrypt registered
[ 1.417121] Key type fscrypt-provisioning registered
[ 1.435432] Key type encrypted registered
[ 1.449873] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.464289] ima: No TPM chip found, activating TPM-bypass!
[ 1.478525] Loading compiled-in module X.509 certificates
[ 1.492974] Loaded X.509 cert 'Build time autogenerated kernel key: 50841dc75de9a7863417bc98ff2d6d89ba2c0eec'
[ 1.520853] ima: Allocated hash algorithm: sha1
[ 1.534603] ima: No architecture policies found
[ 1.548082] evm: Initialising EVM extended attributes:
[ 1.561406] evm: security.selinux
[ 1.574340] evm: security.SMACK64
[ 1.586841] evm: security.SMACK64EXEC
[ 1.598903] evm: security.SMACK64TRANSMUTE
[ 1.610578] evm: security.SMACK64MMAP
[ 1.621785] evm: security.apparmor
[ 1.632561] evm: security.ima
[ 1.642869] evm: security.capability
[ 1.652796] evm: HMAC attrs: 0x1
[ 1.662563] PM: Magic number: 0:968:18
[ 1.672040] RAS: Correctable Errors collector initialized.
[ 1.682493] Freeing unused decrypted memory: 2036K
[ 1.692034] Freeing unused kernel image (initmem) memory: 4764K
[ 1.720775] Write protecting the kernel read-only data: 34816k
[ 1.730272] Freeing unused kernel image (rodata/data gap) memory: 1612K
[ 1.778896] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.787788] x86/mm: Checking user space page tables
[ 1.834521] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.843158] Run /init as init process
[ 1.851675] with arguments:
[ 1.851676] /init
[ 1.851677] splash
[ 1.851678] with environment:
[ 1.851678] HOME=/
[ 1.851679] TERM=linux
[ 1.851680] BOOT_IMAGE=/boot/vmlinuz-6.2.0-39-generic
[ 2.019317] ACPI: video: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 2.038286] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input9
[ 2.058852] sdhci: Secure Digital Host Controller Interface driver
[ 2.068325] sdhci: Copyright(c) Pierre Ossman
[ 2.069843] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.087466] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.107990] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[ 2.129290] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.139929] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.161700] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 2.173343] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[ 2.197374] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.222401] usb usb1: Product: xHCI Host Controller
[ 2.235053] usb usb1: Manufacturer: Linux 6.2.0-39-generic xhci-hcd
[ 2.247906] usb usb1: SerialNumber: 0000:00:14.0
[ 2.260768] hub 1-0:1.0: USB hub found
[ 2.260816] ahci 0000:00:17.0: version 3.0
[ 2.263501] alx 0000:3b:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [80:fa:5b:22:9d:c4]
[ 2.273269] hub 1-0:1.0: 16 ports detected
[ 2.298634] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
[ 2.312062] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02
[ 2.334099] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0x1e impl SATA mode
[ 2.349952] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.376028] ahci 0000:00:17.0: flags: 64bit ncq sntf stag led clo only pio slum part ems sxs deso sadm sds apst
[ 2.389872] alx 0000:3b:00.0 enp59s0: renamed from eth0
[ 2.401882] usb usb2: Product: xHCI Host Controller
[ 2.454494] usb usb2: Manufacturer: Linux 6.2.0-39-generic xhci-hcd
[ 2.467694] usb usb2: SerialNumber: 0000:00:14.0
[ 2.480716] hub 2-0:1.0: USB hub found
[ 2.480845] scsi host0: ahci
[ 2.496478] hub 2-0:1.0: 10 ports detected
[ 2.506008] scsi host1: ahci
[ 2.518477] usb: port power management may be unreliable
[ 2.530552] scsi host2: ahci
[ 2.554526] scsi host3: ahci
[ 2.566030] scsi host4: ahci
[ 2.566091] sdhci-pci 0000:3c:00.0: SDHCI controller found [10ec:5250] (rev 1)
[ 2.577007] ata1: DUMMY
[ 2.599402] mmc0: SDHCI controller on PCI [0000:3c:00.0] using ADMA
[ 2.609767] ata2: SATA max UDMA/133 abar m2048@0xda12b000 port 0xda12b180 irq 127
[ 2.643196] ata3: SATA max UDMA/133 abar m2048@0xda12b000 port 0xda12b200 irq 127
[ 2.665723] ata4: SATA max UDMA/133 abar m2048@0xda12b000 port 0xda12b280 irq 127
[ 2.688642] ata5: SATA max UDMA/133 abar m2048@0xda12b000 port 0xda12b300 irq 127
[ 2.711582] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[ 2.879323] usb 1-1: New USB device found, idVendor=03f0, idProduct=1198, bcdDevice= 7.04
[ 2.902097] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.913793] usb 1-1: Product: HP USB 1000dpi Laser Mouse
[ 2.925251] usb 1-1: Manufacturer: HP
[ 3.027898] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.064480] usb 1-2: new full-speed USB device number 3 using xhci_hcd
[ 3.222280] usb 1-2: New USB device found, idVendor=1c7a, idProduct=0603, bcdDevice= 2.00
[ 3.245326] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.257533] usb 1-2: Product: EgisTec_ES603
[ 3.269658] usb 1-2: Manufacturer: EgisTec
[ 3.353253] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.393884] ata3.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
[ 3.408478] usb 1-10: new high-speed USB device number 4 using xhci_hcd
[ 3.415378] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 3.484618] ata3.00: configured for UDMA/133
[ 3.497747] scsi 2:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
[ 3.523940] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.524030] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 3.563381] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 3.576462] sd 2:0:0:0: [sda] Write Protect is off
[ 3.589207] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.589216] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.614256] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 3.628589] usb 1-10: New USB device found, idVendor=5986, idProduct=066d, bcdDevice= 6.05
[ 3.653438] sda: sda1 sda2 < sda5 >
[ 3.653471] usb 1-10: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.665810] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.690052] usb 1-10: Product: BisonCam, NB Pro
[ 3.714292] usb 1-10: Manufacturer: Generic
[ 3.726251] usb 1-10: SerialNumber: 200901010001
[ 3.851601] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.868699] usb 1-11: new full-speed USB device number 5 using xhci_hcd
[ 3.891996] ata4.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
[ 3.912935] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 3.974191] ata4.00: configured for UDMA/133
[ 3.986163] scsi 3:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
[ 4.009848] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 4.009867] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 4.029875] usb 1-11: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[ 4.044946] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 4.044954] sd 3:0:0:0: [sdb] Write Protect is off
[ 4.044955] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.044962] psmouse serio2: synaptics: queried max coordinates: x [..5654], y [..4716]
[ 4.044964] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.044976] sd 3:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[ 4.066257] sdb: sdb1
[ 4.066334] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 4.068871] usb 1-11: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.141296] hid: raw HID events driver (C) Jiri Kosina
[ 4.185124] psmouse serio2: synaptics: queried min coordinates: x [1326..], y [1228..]
[ 4.237573] psmouse serio2: synaptics: Your touchpad (PNP: SYN1219 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 4.336396] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.354284] ata5.00: supports DRM functions and may not be fully accessible
[ 4.372766] ata5.00: ATA-10: CT500MX500SSD4, M3CR022, max UDMA/133
[ 4.387797] ata5.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 4.403010] ata5.00: Features: Trust Dev-Sleep
[ 4.416620] ata5.00: supports DRM functions and may not be fully accessible
[ 4.431743] ata5.00: configured for UDMA/133
[ 4.445159] scsi 4:0:0:0: Direct-Access ATA CT500MX500SSD4 022 PQ: 0 ANSI: 5
[ 4.447958] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x26800/0x0, board id: 3163, fw id: 1924066
[ 4.471916] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 4.471933] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 4.471934] sd 4:0:0:0: [sdc] 4096-byte physical blocks
[ 4.471939] sd 4:0:0:0: [sdc] Write Protect is off
[ 4.471940] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.471947] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.471962] sd 4:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes
[ 4.511983] sdc: sdc1 sdc2 < sdc5 >
[ 4.538015] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
[ 4.644255] sd 4:0:0:0: [sdc] supports TCG Opal
[ 4.657435] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 4.679085] usbcore: registered new interface driver usbhid
[ 4.691920] usbhid: USB HID core driver
[ 4.707661] input: HP HP USB 1000dpi Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:03F0:1198.0001/input/input14
[ 4.733241] hid-generic 0003:03F0:1198.0001: input,hidraw0: USB HID v2.00 Mouse [HP HP USB 1000dpi Laser Mouse] on usb-0000:00:14.0-1/input0
[ 4.758980] hid-generic 0003:03F0:1198.0002: hiddev0,hidraw1: USB HID v2.00 Device [HP HP USB 1000dpi Laser Mouse] on usb-0000:00:14.0-1/input1
[ 5.310483] EXT4-fs (sdc1): mounted filesystem bf8aa1eb-eb90-4f38-933f-94c5c426d4a0 with ordered data mode. Quota mode: none.
[ 5.573189] systemd[1]: Inserted module 'autofs4'
[ 5.628620] systemd[1]: systemd 253.5-1ubuntu6.1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 5.702080] systemd[1]: Detected architecture x86-64.
[ 5.755087] systemd[1]: Hostname set to <Hvergelmir>.
[ 6.255859] systemd[1]: Queued start job for default target graphical.target.
[ 6.291493] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 6.349489] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 6.388077] systemd[1]: Created slice system-tor.slice - Slice /system/tor.
[ 6.414480] systemd[1]: Created slice user.slice - User and Session Slice.
[ 6.441078] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 6.481321] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 6.522359] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 6.565477] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 6.608689] systemd[1]: Reached target slices.target - Slice Units.
[ 6.637482] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
[ 6.682047] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 6.728709] systemd[1]: Listening on syslog.socket - Syslog Socket.
[ 6.760080] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 6.807022] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 6.854176] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 6.901362] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 6.948156] systemd[1]: Listening on systemd-oomd.socket - Userspace Out-Of-Memory (OOM) Killer Socket.
[ 6.994866] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 7.041342] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 7.108866] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 7.156751] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 7.204020] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 7.251353] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 7.312969] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 7.324463] systemd-journald[362]: Collecting audit messages is disabled.
[ 7.376006] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 7.424346] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 7.472176] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 7.519506] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 7.567015] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 7.609585] ACPI: bus type drm_connector registered
[ 7.630459] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 7.678227] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 7.741026] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[ 7.795535] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 7.843854] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 7.880864] lp: driver loaded but no devices found
[ 7.883769] ppdev: user-space parallel port driver
[ 7.921994] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[ 7.988200] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 8.020966] Bridge firewalling registered
[ 8.052595] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 8.058454] EXT4-fs (sdc1): re-mounted bf8aa1eb-eb90-4f38-933f-94c5c426d4a0. Quota mode: none.
[ 8.128943] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 8.178772] systemd[1]: Started systemd-journald.service - Journal Service.
[ 8.472196] systemd-journald[362]: Received client request to flush runtime journal.
[ 8.507537] systemd-journald[362]: /var/log/journal/5549e0bdd7894bcdaf6803fdee663df4/system.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.
[ 8.507540] systemd-journald[362]: Rotating system journal.
[ 8.748474] loop0: detected capacity change from 0 to 765496
[ 8.773953] loop1: detected capacity change from 0 to 8
[ 8.806659] loop2: detected capacity change from 0 to 19632
[ 8.821318] loop3: detected capacity change from 0 to 20128
[ 8.833748] loop4: detected capacity change from 0 to 328528
[ 8.846559] loop5: detected capacity change from 0 to 328776
[ 8.859493] loop6: detected capacity change from 0 to 610184
[ 8.871905] loop7: detected capacity change from 0 to 610752
[ 8.885036] loop8: detected capacity change from 0 to 216720
[ 8.896308] loop9: detected capacity change from 0 to 215872
[ 8.908550] loop10: detected capacity change from 0 to 113992
[ 8.919569] loop11: detected capacity change from 0 to 113992
[ 8.930715] loop12: detected capacity change from 0 to 130888
[ 8.941169] loop13: detected capacity change from 0 to 130880
[ 8.952209] loop14: detected capacity change from 0 to 151784
[ 8.961791] loop15: detected capacity change from 0 to 151992
[ 8.971513] loop16: detected capacity change from 0 to 136272
[ 8.980235] loop17: detected capacity change from 0 to 136320
[ 8.989316] loop18: detected capacity change from 0 to 537600
[ 8.997709] loop19: detected capacity change from 0 to 546064
[ 9.006156] loop20: detected capacity change from 0 to 21888
[ 9.014421] loop21: detected capacity change from 0 to 288120
[ 9.022348] loop22: detected capacity change from 0 to 288072
[ 9.030074] loop23: detected capacity change from 0 to 337560
[ 9.037878] loop24: detected capacity change from 0 to 337560
[ 9.050299] loop25: detected capacity change from 0 to 447264
[ 9.061646] loop26: detected capacity change from 0 to 447264
[ 9.069397] loop27: detected capacity change from 0 to 716168
[ 9.076250] loop28: detected capacity change from 0 to 716176
[ 9.082620] loop29: detected capacity change from 0 to 1017608
[ 9.088406] loop30: detected capacity change from 0 to 1017816
[ 9.094344] loop31: detected capacity change from 0 to 3032
[ 9.099643] loop32: detected capacity change from 0 to 3160
[ 9.105071] loop33: detected capacity change from 0 to 166424
[ 9.110378] loop34: detected capacity change from 0 to 187776
[ 9.115835] loop35: detected capacity change from 0 to 232
[ 9.121304] loop36: detected capacity change from 0 to 237944
[ 9.127004] loop37: detected capacity change from 0 to 238408
[ 9.132657] loop38: detected capacity change from 0 to 1065880
[ 9.138647] loop39: detected capacity change from 0 to 36552
[ 9.144534] loop40: detected capacity change from 0 to 1317608
[ 9.150582] loop41: detected capacity change from 0 to 1318120
[ 9.156662] loop42: detected capacity change from 0 to 299056
[ 9.162817] loop43: detected capacity change from 0 to 301136
[ 9.169825] loop44: detected capacity change from 0 to 366696
[ 9.175588] loop45: detected capacity change from 0 to 369360
[ 9.182687] loop46: detected capacity change from 0 to 94064
[ 9.188850] loop47: detected capacity change from 0 to 25240
[ 9.194877] loop48: detected capacity change from 0 to 82800
[ 9.201217] loop49: detected capacity change from 0 to 856
[ 9.207337] loop50: detected capacity change from 0 to 904
[ 9.213353] loop51: detected capacity change from 0 to 359776
[ 9.219496] loop52: detected capacity change from 0 to 363600
[ 9.225833] loop53: detected capacity change from 0 to 666536
[ 9.232024] loop54: detected capacity change from 0 to 253672
[ 9.238324] loop55: detected capacity change from 0 to 958616
[ 9.244569] loop56: detected capacity change from 0 to 958960
[ 9.250777] loop57: detected capacity change from 0 to 75584
[ 9.472135] EDAC ie31200: No ECC support
[ 9.486983] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 9.549152] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 9.549191] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 9.549236] pci 0000:00:1f.1: [8086:a120] type 00 class 0x058000
[ 9.549294] pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit]
[ 9.556389] i2c i2c-0: 4/4 memory slots populated (from DMI)
[ 9.556717] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 9.558983] i2c i2c-0: Successfully instantiated SPD at 0x51
[ 9.560964] i2c i2c-0: Successfully instantiated SPD at 0x52
[ 9.561312] i2c i2c-0: Successfully instantiated SPD at 0x53
[ 9.587467] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 9.587672] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 9.619690] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 9.619692] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 9.619693] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 9.619694] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 9.623497] cryptd: max_cpu_qlen set to 1000
[ 9.626780] Intel(R) Wireless WiFi driver for Linux
[ 9.636914] AVX2 version of gcm_enc/dec engaged.
[ 9.636969] AES CTR mode by8 optimization enabled
[ 9.640484] iwlwifi 0000:3d:00.0: Found debug destination: EXTERNAL_DRAM
[ 9.640487] iwlwifi 0000:3d:00.0: Found debug configuration: 0
[ 9.640624] iwlwifi 0000:3d:00.0: loaded firmware version 29.4063824552.0 7265D-29.ucode op_mode iwlmvm
[ 9.766190] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 9.768539] ee1004 0-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 9.768721] ee1004 0-0052: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 9.769587] ee1004 0-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 9.769830] iwlwifi 0000:3d:00.0: Detected Intel(R) Wireless N 7265, REV=0x210
[ 9.773733] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 9.773739] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 9.779987] thermal thermal_zone2: failed to read out thermal zone (-61)
[ 9.793018] iwlwifi 0000:3d:00.0: Applying debug destination EXTERNAL_DRAM
[ 9.793346] iwlwifi 0000:3d:00.0: Allocated 0x00400000 bytes for firmware monitor.
[ 9.798041] iwlwifi 0000:3d:00.0: base HW address: 5c:e0:c5:d5:05:3e, OTP minor version: 0x0
[ 9.800533] intel_tcc_cooling: Programmable TCC Offset detected
[ 9.807904] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:line
[ 9.807908] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 9.807910] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 9.807911] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 9.807912] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 9.807913] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 9.807915] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 9.807916] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 9.807917] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 9.811698] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 9.811735] intel_rapl_common: Found RAPL domain package
[ 9.811738] intel_rapl_common: Found RAPL domain core
[ 9.811740] intel_rapl_common: Found RAPL domain dram
[ 9.811932] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 9.812022] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 9.812171] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 9.820237] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 9.820292] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 9.820338] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 9.820383] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[ 9.858282] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 9.861602] iwlwifi 0000:3d:00.0 wlp61s0: renamed from wlan0
[ 9.863694] ahci 0000:00:17.0: port does not support device sleep
[ 9.948189] Adding 39062524k swap on /dev/sda1. Priority:-2 extents:1 across:39062524k FS
[ 10.040698] EXT4-fs (sdc5): mounted filesystem e4126291-5a3b-4312-b254-69867d3183e4 with ordered data mode. Quota mode: none.
[ 10.042486] EXT4-fs (sdb1): mounted filesystem 766502ca-c010-4be5-a13b-7681e0584784 with ordered data mode. Quota mode: none.
[ 10.084925] EXT4-fs (sda5): mounted filesystem 5c045e7c-8a7c-40b7-ba57-30258b0edf5c with ordered data mode. Quota mode: none.
[ 10.089791] audit: type=1400 audit(1709283747.710:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/opt/brave.com/brave/brave" pid=1247 comm="apparmor_parser"
[ 10.089959] audit: type=1400 audit(1709283747.710:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/opt/vivaldi/vivaldi-bin" pid=1251 comm="apparmor_parser"
[ 10.089990] audit: type=1400 audit(1709283747.710:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/opt/microsoft/msedge/msedge" pid=1249 comm="apparmor_parser"
[ 10.090092] audit: type=1400 audit(1709283747.710:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/bin/toybox" pid=1243 comm="apparmor_parser"
[ 10.090488] audit: type=1400 audit(1709283747.710:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/opt/google/chrome/chrome" pid=1248 comm="apparmor_parser"
[ 10.093600] audit: type=1400 audit(1709283747.714:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1246 comm="apparmor_parser"
[ 10.093604] audit: type=1400 audit(1709283747.714:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1246 comm="apparmor_parser"
[ 10.093635] audit: type=1400 audit(1709283747.714:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1245 comm="apparmor_parser"
[ 10.094212] audit: type=1400 audit(1709283747.714:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/buildah" pid=1258 comm="apparmor_parser"
[ 10.096066] audit: type=1400 audit(1709283747.714:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/busybox" pid=1259 comm="apparmor_parser"
[ 10.650178] mc: Linux media interface: v0.10
[ 10.683075] Bluetooth: Core ver 2.22
[ 10.683096] NET: Registered PF_BLUETOOTH protocol family
[ 10.683097] Bluetooth: HCI device and connection manager initialized
[ 10.683101] Bluetooth: HCI socket layer initialized
[ 10.683103] Bluetooth: L2CAP socket layer initialized
[ 10.683107] Bluetooth: SCO socket layer initialized
[ 10.686320] videodev: Linux video capture interface: v2.00
[ 10.808740] usbcore: registered new interface driver btusb
[ 10.819242] usb 1-10: Found UVC 1.00 device BisonCam, NB Pro (5986:066d)
[ 10.824600] input: BisonCam, NB Pro: BisonCam, NB as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/input/input23
[ 10.824674] usbcore: registered new interface driver uvcvideo
[ 10.829067] Bluetooth: hci0: Legacy ROM 2.5 revision 1.0 build 3 week 17 2014
[ 10.829072] Bluetooth: hci0: Intel device is already patched. patch num: 32
[ 10.938950] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.938954] Bluetooth: BNEP filters: protocol multicast
[ 10.938956] Bluetooth: BNEP socket layer initialized
[ 10.940545] Bluetooth: MGMT ver 1.22
[ 10.945262] NET: Registered PF_ALG protocol family
[ 11.338563] iwlwifi 0000:3d:00.0: Applying debug destination EXTERNAL_DRAM
[ 11.415611] iwlwifi 0000:3d:00.0: Applying debug destination EXTERNAL_DRAM
[ 11.416745] iwlwifi 0000:3d:00.0: FW already configured (0) - re-configuring
[ 11.628131] loop58: detected capacity change from 0 to 8
[ 12.295285] wlp61s0: authenticate with 70:fc:8f:f2:e2:80
[ 12.295299] wlp61s0: 80 MHz not supported, disabling VHT
[ 12.299428] wlp61s0: send auth to 70:fc:8f:f2:e2:80 (try 1/3)
[ 12.301819] wlp61s0: authenticated
[ 12.304458] wlp61s0: associate with 70:fc:8f:f2:e2:80 (try 1/3)
[ 12.310584] wlp61s0: RX AssocResp from 70:fc:8f:f2:e2:80 (capab=0x1411 status=0 aid=1)
[ 12.315092] wlp61s0: associated
[ 12.392639] IPv6: ADDRCONF(NETDEV_CHANGE): wlp61s0: link becomes ready
[ 13.371908] bpfilter: Loaded bpfilter_umh pid 2405
[ 13.372180] Started bpfilter
[ 14.194245] loop58: detected capacity change from 0 to 636528
[ 15.460873] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details.
[ 15.589708] kauditd_printk_skb: 274 callbacks suppressed
[ 15.589709] audit: type=1400 audit(1709283753.210:286): apparmor="STATUS" operation="profile_load" profile="snap.multipass.multipassd" name="multipass.qemu-img" pid=2800 comm="apparmor_parser"
[ 15.696543] audit: type=1400 audit(1709283753.318:287): apparmor="STATUS" operation="profile_remove" profile="snap.multipass.multipassd" name="multipass.qemu-img" pid=2812 comm="apparmor_parser"
[ 15.724954] audit: type=1400 audit(1709283753.346:288): apparmor="STATUS" operation="profile_load" profile="snap.multipass.multipassd" name="multipass.qemu-img" pid=2814 comm="apparmor_parser"
[ 15.759209] audit: type=1400 audit(1709283753.378:289): apparmor="STATUS" operation="profile_remove" profile="snap.multipass.multipassd" name="multipass.qemu-img" pid=2819 comm="apparmor_parser"
[ 15.811579] audit: type=1400 audit(1709283753.430:290): apparmor="STATUS" operation="profile_load" profile="snap.multipass.multipassd" name="multipass.qemu-img" pid=2842 comm="apparmor_parser"
[ 15.848486] audit: type=1400 audit(1709283753.470:291): apparmor="STATUS" operation="profile_remove" profile="snap.multipass.multipassd" name="multipass.qemu-img" pid=2849 comm="apparmor_parser"
[ 15.878029] audit: type=1400 audit(1709283753.498:292): apparmor="STATUS" operation="profile_load" profile="snap.multipass.multipassd" name="multipass.qemu-img" pid=2865 comm="apparmor_parser"
[ 15.914349] audit: type=1400 audit(1709283753.534:293): apparmor="STATUS" operation="profile_remove" profile="snap.multipass.multipassd" name="multipass.qemu-img" pid=2880 comm="apparmor_parser"
[ 15.966275] audit: type=1326 audit(1709283753.586:294): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=snap.cups.cupsd pid=2484 comm="cupsd" exe="/snap/cups/1024/sbin/cupsd" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7fc0803afa9b code=0x50000
[ 17.409097] vboxdrv: loading out-of-tree module taints kernel.
[ 17.409318] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 17.422174] vboxdrv: Found 8 processor cores/threads
[ 17.440786] vboxdrv: TSC mode is Invariant, tentative frequency 4007999088 Hz
[ 17.440789] vboxdrv: Successfully loaded version 7.0.14_Ubuntu r161095 (interface 0x00330004)
[ 17.450049] VBoxNetFlt: Successfully started.
[ 17.457700] VBoxNetAdp: Successfully started.
[ 32.273656] Bluetooth: RFCOMM TTY layer initialized
[ 32.273660] Bluetooth: RFCOMM socket layer initialized
[ 32.273663] Bluetooth: RFCOMM ver 1.11
[ 64.105887] audit: type=1400 audit(1709283801.925:295): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/20671/usr/lib/snapd/snap-confine" pid=3937 comm="snap-confine" capability=12 capname="net_admin"
[ 64.105928] audit: type=1400 audit(1709283801.925:296): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/20671/usr/lib/snapd/snap-confine" pid=3937 comm="snap-confine" capability=38 capname="perfmon"
[ 64.505539] systemd-journald[362]: /var/log/journal/5549e0bdd7894bcdaf6803fdee663df4/user-1000.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.Merci d'avance 
Dernière modification par nazonfly (Le 01/03/2024, à 16:43)
Hors ligne
#2 Le 01/03/2024, à 14:06
- ylag
Re : [Résolu] Impossible de démarrer session graphique
Bonjour,
Difficile de se faire une idée claire de ton souci sans savoir exactement ce que tu as fait ...
Pour un complément d'infos, donne les résultats complets de :
ubuntu-drivers devicesgrep nouveau /etc/modprobe.d/*.confapt policy xserver-xorg-video-nouveauA+
Hors ligne
#3 Le 01/03/2024, à 14:13
- nazonfly
Re : [Résolu] Impossible de démarrer session graphique
ylag a écrit :
Bonjour,
Difficile de se faire une idée claire de ton souci sans savoir exactement ce que tu as fait ...
Pour un complément d'infos, donne les résultats complets de :ubuntu-drivers devicesgrep nouveau /etc/modprobe.d/*.confapt policy xserver-xorg-video-nouveauA+
Au départ je n'ai vraiment rien fait d'autre qu'éteindre l'ordinateur. Ptet une MAJ Livepatch ?
ubuntu-drivers devices
udevadm hwdb is deprecated. Use systemd-hwdb instead.
udevadm hwdb is deprecated. Use systemd-hwdb instead.
udevadm hwdb is deprecated. Use systemd-hwdb instead.
udevadm hwdb is deprecated. Use systemd-hwdb instead.
udevadm hwdb is deprecated. Use systemd-hwdb instead.
udevadm hwdb is deprecated. Use systemd-hwdb instead.
udevadm hwdb is deprecated. Use systemd-hwdb instead.
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
modalias : pci:v000010DEd00001617sv00001558sd00007703bc03sc00i00
vendor : NVIDIA Corporation
model : GM204M [GeForce GTX 980M]
driver : nvidia-driver-470 - distro non-free
driver : nvidia-driver-545 - distro non-free
driver : nvidia-driver-535-server - distro non-free
driver : nvidia-driver-470-server - distro non-free
driver : nvidia-driver-535 - distro non-free recommended
driver : nvidia-driver-525 - distro non-free
driver : nvidia-driver-525-server - distro non-free
driver : xserver-xorg-video-nouveau - distro free builtingrep nouveau /etc/modprobe.d/*.conf
/etc/modprobe.d/nvidia-installer-disable-nouveau.conf:blacklist nouveau
/etc/modprobe.d/nvidia-installer-disable-nouveau.conf:options nouveau modeset=0apt policy xserver-xorg-video-nouveau
xserver-xorg-video-nouveau:
Installé : 1:1.0.17-2build1
Candidat : 1:1.0.17-2build1
Table de version :
*** 1:1.0.17-2build1 500
500 http://archive.ubuntu.com/ubuntu mantic/main amd64 Packages
100 /var/lib/dpkg/statusHors ligne
#4 Le 01/03/2024, à 14:58
- xubu1957
Re : [Résolu] Impossible de démarrer session graphique
Bonjour,
As-tu moyen de changer de session avec la roue crantée, pour tester wayland ?
Regarde l'EDIT de malbo dans ce message, pour la roue crantée, (ou le début du message #8, citant nany).
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#5 Le 01/03/2024, à 15:03
- geole
Re : [Résolu] Impossible de démarrer session graphique
Bonjour
Donne aussi ce retour
df -htext4Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#6 Le 01/03/2024, à 15:11
- ylag
Re : [Résolu] Impossible de démarrer session graphique
Bonjour,
Ajoute aussi :
dpkg -l | grep -i nvidiaA+
Hors ligne
#7 Le 01/03/2024, à 15:25
- nazonfly
Re : [Résolu] Impossible de démarrer session graphique
xubu1957 a écrit :
Bonjour,
As-tu moyen de changer de session avec la roue crantée, pour tester wayland ?
Regarde l'EDIT de malbo dans ce message, pour la roue crantée, (ou le début du message #8, citant nany).
Sous la roue crantée, j'ai le choix entre Ubuntu (Wayland ?) ou GNOME Classic. Que je sois sous l'un ou l'autre :
echo $XDG_SESSION_TYPE
x11(donc pas de Wayland ? mais je suis en recovery mode)
geole a écrit :
Bonjour
Donne aussi ce retourdf -htext4
df -htext4
Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
/dev/sdc1 137G 57G 74G 44% /
/dev/sdc5 320G 301G 3,6G 99% /home
/dev/sdb1 1,8T 1,6T 172G 91% /data2
/dev/sda5 1,8T 1,3T 421G 76% /data1ylag a écrit :
Bonjour,
Ajoute aussi :
dpkg -l | grep -i nvidiaA+
dpkg -l | grep -i nvidia
ii libnvidia-compute-470:amd64 470.239.06-0ubuntu0.23.10.1 amd64 NVIDIA libcompute package
ii libnvidia-compute-470:i386 470.239.06-0ubuntu0.23.10.1 i386 NVIDIA libcompute package
rc libnvidia-compute-535:amd64 535.161.07-0ubuntu0.23.10.1 amd64 NVIDIA libcompute package
rc libnvidia-compute-545:amd64 545.29.06-0ubuntu0.22.04.2 amd64 NVIDIA libcompute package
rc linux-modules-nvidia-470-6.2.0-39-generic 6.2.0-39.40~22.04.1+1 amd64 Linux kernel nvidia modules for version 6.2.0-39
rc linux-modules-nvidia-535-6.5.0-21-generic 6.5.0-21.21+1 amd64 Linux kernel nvidia modules for version 6.5.0-21
rc linux-modules-nvidia-545-6.5.0-21-generic 6.5.0-21.21~22.04.1+1 amd64 Linux kernel nvidia modules for version 6.5.0-21
ii linux-objects-nvidia-470-6.2.0-39-generic 6.2.0-39.40~22.04.1+1 amd64 Linux kernel nvidia modules for version 6.2.0-39 (objects)
ii linux-objects-nvidia-470-6.5.0-21-generic 6.5.0-21.21+1 amd64 Linux kernel nvidia modules for version 6.5.0-21 (objects)
ii linux-objects-nvidia-535-6.5.0-21-generic 6.5.0-21.21+1 amd64 Linux kernel nvidia modules for version 6.5.0-21 (objects)
ii linux-objects-nvidia-545-6.5.0-21-generic 6.5.0-21.21+1 amd64 Linux kernel nvidia modules for version 6.5.0-21 (objects)
ii linux-signatures-nvidia-6.2.0-39-generic 6.2.0-39.40~22.04.1+1 amd64 Linux kernel signatures for nvidia modules for version 6.2.0-39-generic
ii linux-signatures-nvidia-6.5.0-21-generic 6.5.0-21.21+1 amd64 Linux kernel signatures for nvidia modules for version 6.5.0-21-genericHors ligne
#8 Le 01/03/2024, à 15:47
- ylag
Re : [Résolu] Impossible de démarrer session graphique
Bonjour,
La partition /home est saturée ( 99% ), c'est probablement suffisant pour bloquer l'ouverture de la session graphique ...
Il semblerait que tu aies tenté l'installation de plusieurs versions du pilote proprio Nvidia, qui n'ont pas été proprement désinstallées, ça aurait laissé derrière le fichier
nvidia-installer-disable-nouveau.conf dont la présence empêche le chargement du pilote libre nouveau.
Il faut premièrement faire de la place dans /home.
Après, difficile pour moi de proposer une procédure de nettoyage des résidus d'installation du pilote proprio Nvidia sans risquer de casser encore plus ton système ; faudra l'avis des autres intervenants dans ce cas.
A+
Hors ligne
#9 Le 01/03/2024, à 16:42
- nazonfly
Re : [Résolu] Impossible de démarrer session graphique
ylag a écrit :
Bonjour,
La partition /home est saturée ( 99% ), c'est probablement suffisant pour bloquer l'ouverture de la session graphique ...
Il semblerait que tu aies tenté l'installation de plusieurs versions du pilote proprio Nvidia, qui n'ont pas été proprement désinstallées, ça aurait laissé derrière le fichier
nvidia-installer-disable-nouveau.conf dont la présence empêche le chargement du pilote libre nouveau.Il faut premièrement faire de la place dans /home.
Après, difficile pour moi de proposer une procédure de nettoyage des résidus d'installation du pilote proprio Nvidia sans risquer de casser encore plus ton système ; faudra l'avis des autres intervenants dans ce cas.
A+
Merci pour la piste.
Mon /home avait quand même près de 4G de libre, j'ai fait quand même de la place (12G, 97%), ça n'a rien changé.
Par contre, en suivant rapidement ce lien : https://fr.linux-console.net/?p=21608
j'ai renommé le fichier nvidia-installer-disable-nouveau.conf pour qu'il ne soit plus pris en compte. J'ai de nouveau mon bureau correct
echo $XDG_SESSION_TYPE
waylandsudo lshw
*-display
description: VGA compatible controller
produit: GM204M [GeForce GTX 980M]
fabricant: NVIDIA Corporation
identifiant matériel: 0
information bus: pci@0000:01:00.0
nom logique: /dev/fb0
version: a1
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom fb
configuration : depth=32 driver=nouveau latency=0 resolution=1920,1080
ressources : irq:130 mémoire:db000000-dbffffff mémoire:b0000000-bfffffff mémoire:c0000000-c1ffffff portE/S:e000(taille=128) mémoire:c0000-dffffgrep nouveau /etc/modprobe.d/*.confAucune sortie de ce côté-là.
Ça ne me dit pas pourquoi ma config est devenue foireuse d'un coup (un pb de mise à jour de drivers graphiques on dirait ?). Et il va falloir que je regarde pour virer sereinement les drivers nvidia (ou les réinstaller ?). Mais je vais rester sur nouveau quelques temps
Encore merci à ceux qui prennent le temps de répondre !!
Hors ligne