#1 Le 08/06/2008, à 17:15
- maximanga
ai je fait une erreur ou non
bonjour
c'est pour savoir comment retourner a windows(oui je sais c'est bete comme question mais bon)parce que je n'ai plus aucune trace de windows.alors aurais-je supprimer windows xp par erreur?
merci de m'aider a resoudre mon probleme
Hors ligne
#2 Le 08/06/2008, à 17:17
- meushi
Re : ai je fait une erreur ou non
salut
tu l'as pas forcément supprimé ton xp. vérifie que toute tes partitions sont montées, peut-être ta partoche windows n'est pas montée, donc invisible.
Hors ligne
#3 Le 08/06/2008, à 17:18
- marteo
Re : ai je fait une erreur ou non
...
explique ce que tu as fait avant de demander si c'est bien ou non, s'il te plait.
edit : me suis fait doubler xD
Dernière modification par marteo (Le 08/06/2008, à 17:19)
Taupe - Stan εTB, χαθ4, info, => MP(*), χamp1 (+) || tan(φ)
** HX2, tous des dieux **
Vieux PC faiblard Pentium III 256 Mio RAM, 1 Gio Swap, Debian+e17 (mais ca varie ^^)
Hors ligne
#4 Le 08/06/2008, à 17:19
- lagirardiere
Re : ai je fait une erreur ou non
slt
fais un sudo fdisk -l dans une console et poste le résultat .
Dernière modification par lagirardiere (Le 08/06/2008, à 17:21)
Portable DELL Inspiron 15R ,Ubuntu 16.4 ,écran 15,6 P ,4 go ram ,CPU intel core I3 ,disque dur 600 go, ATI Mobility Radeon HD 5000 Series ,carte wifi Broadcom Corporation BCM4313 802.11b/g
Hors ligne
#5 Le 08/06/2008, à 17:26
- maximanga
Re : ai je fait une erreur ou non
dans le terminal?
Dernière modification par maximanga (Le 08/06/2008, à 17:29)
Hors ligne
#6 Le 08/06/2008, à 21:22
- maximanga
Re : ai je fait une erreur ou non
il me met
Disque /dev/sda: 200.0 Go, 200049647616 octets
255 heads, 63 sectors/track, 24321 cylinders
Units = cylindres of 16065 * 512 = 8225280 bytes
Identifiant disque: 0xe02ae02a
Périphérique Amorce Début Fin Blocs Id Système
/dev/sda1 * 1 7830 62894443+ b W95 FAT32
/dev/sda2 7831 13058 41993910 b W95 FAT32
/dev/sda3 13059 24321 90470047+ 5 Extended
/dev/sda5 13059 24133 88959906 83 Linux
/dev/sda6 24134 24321 1510078+ 82 Linux swap / Solaris
HELP PLZ
Dernière modification par maximanga (Le 08/06/2008, à 21:40)
Hors ligne
#7 Le 08/06/2008, à 21:52
- maximanga
Re : ai je fait une erreur ou non
reponder moi plz
ps:dsl triple post
Hors ligne
#8 Le 08/06/2008, à 21:54
- Sir Na Kraïou
Re : ai je fait une erreur ou non
Hello,
que renvoie la commande
cat /boot/grub/menu.lst
Descendant de Charlemagne et de LUCA.
Bleu, en l'hommage d'un truc bleu. :'(
C'est pas du bleu.
C'est pas le lac de Genève, c'est le Lac Léman.
Hors ligne
#9 Le 08/06/2008, à 21:57
- maximanga
Re : ai je fait une erreur ou non
elle dit
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=5479bc03-ed21-4d5b-8e96-5c8415c99e1b ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 8.04, kernel 2.6.24-18-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.24-18-generic root=UUID=5479bc03-ed21-4d5b-8e96-5c8415c99e1b ro quiet splash
initrd /boot/initrd.img-2.6.24-18-generic
quiet
title Ubuntu 8.04, kernel 2.6.24-18-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.24-18-generic root=UUID=5479bc03-ed21-4d5b-8e96-5c8415c99e1b ro single
initrd /boot/initrd.img-2.6.24-18-generic
title Ubuntu 8.04, kernel 2.6.24-16-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=5479bc03-ed21-4d5b-8e96-5c8415c99e1b ro quiet splash
initrd /boot/initrd.img-2.6.24-16-generic
quiet
title Ubuntu 8.04, kernel 2.6.24-16-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=5479bc03-ed21-4d5b-8e96-5c8415c99e1b ro single
initrd /boot/initrd.img-2.6.24-16-generic
title Ubuntu 8.04, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
euh ca veut dire quoi tout ca?
Dernière modification par maximanga (Le 08/06/2008, à 22:04)
Hors ligne
#10 Le 08/06/2008, à 22:06
- Sir Na Kraïou
Re : ai je fait une erreur ou non
Okay
alors tu fais
sudo gedit /boot/grub/menu.lst
(tu remplaces gedit par kate si tu es avec KDE)
ça te demande ton mot de passe, que tu tapes, à l'aveugle, c'est normal. Ensuite, un fichier s'ouvre, tout à la fin, tu rajoutes ces lignes :
title Windows
root (hd0,0)
savedefault
makeactive
chainloader +1
tu sauves et quittes puis redémarre. Juste après le bios, tu as 3 secondes pour faire "echap", ça t'amène sur le menu grub. Avec les flèches tu sélectionnes Windows. Si tu as une erreur, tu la notes et redémarres sous Ubuntu, tu refais la commande pour modifier le fichier et dans la partie précédemment ajoutée, tu repères la ligne root et la modifie pour avoir cela :
root (hd0,1)
tu sauves, quittes et redémarres, vas sur le menu grub et sélectionnes Windows. Si tu as encore un message d'erreur, tu le notes, retournes sous Ubuntu et tu nous copies colles ici les deux messages d'erreur précédemment recopiés.
Si tu ne veux pas avoir à appuyer sur echap pour atteindre le menu grub, tu repères ces lignes là :
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
en commentant (= mettre un # devant) hiddenmenu, tu n'auras plus à appuyer sur echap. En changeant le nombre après timeout, tu modifies le nombre de secondes avant le choix automatique.
Descendant de Charlemagne et de LUCA.
Bleu, en l'hommage d'un truc bleu. :'(
C'est pas du bleu.
C'est pas le lac de Genève, c'est le Lac Léman.
Hors ligne
#11 Le 08/06/2008, à 22:08
- MisterBrown
Re : ai je fait une erreur ou non
Ça c'est le fichier de configuration de GRUB
tu vas le modifier pour pouvoir démarrer windows à nouveau
apparemment tu n'as PAS perdu windows
Mais c'est bizarre quel version de windows as tu?
Dernière modification par MisterBrown (Le 08/06/2008, à 22:09)
Hors ligne
#12 Le 08/06/2008, à 22:11
- maximanga
Re : ai je fait une erreur ou non
j'ai windows xp
Hors ligne
#13 Le 08/06/2008, à 22:14
- MisterBrown
Re : ai je fait une erreur ou non
et est-ce que tu sais si tes partitions de windows XP sont en FAT32 ou en NTFS?
Dernière modification par MisterBrown (Le 08/06/2008, à 22:15)
Hors ligne
#14 Le 08/06/2008, à 22:15
- Sir Na Kraïou
Re : ai je fait une erreur ou non
est-ce que tu as fait la manip' que j'ai mise là : http://forum.ubuntu-fr.org/viewtopic.php?pid=1839138#p1839138 ?
Descendant de Charlemagne et de LUCA.
Bleu, en l'hommage d'un truc bleu. :'(
C'est pas du bleu.
C'est pas le lac de Genève, c'est le Lac Léman.
Hors ligne
#15 Le 08/06/2008, à 22:19
- maximanga
Re : ai je fait une erreur ou non
et est-ce que tu sais si tes partitions de windows XP sont en FAT32 ou en NTFS?
elles sont en fat 32
Hors ligne
#16 Le 08/06/2008, à 22:21
- MisterBrown
Re : ai je fait une erreur ou non
ok alors tout est ok suis la procédure de la 'tite gogole
Hors ligne
#17 Le 08/06/2008, à 22:28
- maximanga
Re : ai je fait une erreur ou non
j'ai fait ce que tu m'a dit la 1ere fois il ma dit
err.lecturdu disque
ou un truc dans le genre
et la 2eme
error13/Invalid or unsupported executable format
celui la c'est exactement ca
je fait quoi maintenant?
merci de votre aide
Hors ligne
#18 Le 08/06/2008, à 23:01
- MisterBrown
Re : ai je fait une erreur ou non
essayes de changer
root (hd0,1)
par
rootnoverify (hd0,1)
Hors ligne
#19 Le 08/06/2008, à 23:06
- Sir Na Kraïou
Re : ai je fait une erreur ou non
les ajouts, tu as fait un copier-coller ou tu les as recopiés ?
Descendant de Charlemagne et de LUCA.
Bleu, en l'hommage d'un truc bleu. :'(
C'est pas du bleu.
C'est pas le lac de Genève, c'est le Lac Léman.
Hors ligne
#20 Le 09/06/2008, à 12:37
- maximanga
Re : ai je fait une erreur ou non
j'ai fait copier coller.
j'ai changer et toujours la meme erreur
je fait quoi maintenant?
Hors ligne
#21 Le 09/06/2008, à 12:56
- MisterBrown
Re : ai je fait une erreur ou non
renvoie nous ton fichier de configuration de grub
$ cat /boot/grub/menu.lst
essayes aussi avec
rootnoverify (hd0,0)
j'aurais du te demander d'essayer celui la en premier
sinon tu as un cd de windows xp?
Hors ligne
#22 Le 09/06/2008, à 13:03
- maximanga
Re : ai je fait une erreur ou non
voici le resultat
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 5
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=5479bc03-ed21-4d5b-8e96-5c8415c99e1b ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 8.04, kernel 2.6.24-18-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.24-18-generic root=UUID=5479bc03-ed21-4d5b-8e96-5c8415c99e1b ro quiet splash
initrd /boot/initrd.img-2.6.24-18-generic
quiet
title Ubuntu 8.04, kernel 2.6.24-18-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.24-18-generic root=UUID=5479bc03-ed21-4d5b-8e96-5c8415c99e1b ro single
initrd /boot/initrd.img-2.6.24-18-generic
title Ubuntu 8.04, kernel 2.6.24-16-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=5479bc03-ed21-4d5b-8e96-5c8415c99e1b ro quiet splash
initrd /boot/initrd.img-2.6.24-16-generic
quiet
title Ubuntu 8.04, kernel 2.6.24-16-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=5479bc03-ed21-4d5b-8e96-5c8415c99e1b ro single
initrd /boot/initrd.img-2.6.24-16-generic
title Ubuntu 8.04, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
title Windows
rootnoverify (hd0,0)
savedefault
makeactive
chainloader +1
je n'ai pas de cd windows xp
mercin de repondre rapidement
Hors ligne
#23 Le 09/06/2008, à 13:20
- maximanga
Re : ai je fait une erreur ou non
repondez svp
Hors ligne
#24 Le 09/06/2008, à 13:24
- MisterBrown
Re : ai je fait une erreur ou non
Toujours les mêmes erreurs avec ces parametres quand tu sélectionne windows au démarrage?
Hors ligne
#25 Le 09/06/2008, à 13:28
- maximanga
Re : ai je fait une erreur ou non
oui les meme
Hors ligne