[RESOLU, à confirmé dans le temps]Système se fige apres l'install

Wilo98 · Le 14/06/2008, à 11:22

Salut tout le monde...

Déjà user d'ubuntu pour 2 autres de mes machines (un eeepc, sur eeexubuntu r3 et un desktop, les 2 en Gusty), hier soir je me décide à me lancer sur ma grosse Berta, la machine dont je me sert tout les jours.

Descriptif matèriel de ma machine :

AMD Athlon 64 X2 avec 1Go de ram
motés une MSI K9MM-V avec une nvidia GeForce 6200.
Pour le disque dux, 40Go en IDE/ATA.

Pour cela, je récupère l'image de Hardy, avec le bureau Gnome, et lance le cd-live .
Le système boot, j'atterit sur le bureau plutot rapidement (plus je me sert d'ubuntu, plus il m'etone... Pourtant ça fait quelque mois que je m'en sert )

Là, je m'émerveille devant l'outil Bluetooth qui reconnait ma clé (en cession live, ouhaaaa).
Je prepare mon disque, format un partition pour me laisser windows en dual boot, prevois le swap qui va bien (2Go) et lance l'install qui se déroule sans acros...

A la fin, je relance la bécane, retire le cd et lance le systeme. Grub me propose de lancer ubuntu et affiche bien les autres options (dont Xp, en bas de la liste). Je valide pour Ubuntu et c'est parti... A l'invite, je me logue, au bout de quelques secondes sur le bureau, le système me propose d'utiliser les drivers proprio de la 6200 et me propose les maj.
En avant pour les drivers qui vont bien, on reboot et se relog à l'invite. Là, je refait un 'houuuuuaaaaaaa ! ! !' Joli les effets classiques... Vivement que je me jette dans compiz voir ce qu'il a dans le bide (les 2 autre bécanes sont un peu legères pour compiz, bien que le eeepc se défend bien).

bref, on lance les mises à jour et là ça va encore... ça télécharge, commence l'install et tout et tout. Sauf que, a moment donnée, le système se fige... la souris bouge encore, mais les clique ne serve plus à rien. Les fenètres se grises. Un petit ctrl+alt+F1, me voilà devant l'invite de log en ligne de commande. Je tape le login, valide et si je veut taper quoi que ce soit, ça apparait à l'ecran (bizare, et mon mot de passe ! ! !). Au bout de quelque seconde, il apparait les messages ci joint en photo :

Il semble que j'ai un problème avec le système de fichiers et mon disque dur.
Un reboot sauvage avec la touche reset (les touches magiques permetant d'envoyer des comandes avec la combinaison de touche alt+syst+quelques choses fonctionne ausi).

Le reboot se passe, je me logue sur le bureau et lance firefox pour chercher à comprendre ce qui c'est passer... Et rebelote.

Bon,je lance le live cd et je décide de sauvegarder les docs de windows sur la partition ou il y avait linux (que je formate avant) et decide de dire adieux à windows. L'install se déroule aussi bien qu'au 1° passe et je reboot...

et on recommence la config de la bete et les maj mais c'est toujours la même histoire....

Les drivers nvidia serai - t - il en cause??? Ou est ce une mise à jour qui provoque ce problème....??? Mon disque n'est pas mort quand meme... ! ! !

Bin voilà, si vous pouviez me trouver des piste pour rétablir le systèm et éviter qu'il ne se fige, ce serai cool...

Travailler sur le live cd c'est bien, mais installer les logiciel qu'on utilise à chaque démarage, c'est po cool...

Merci d'avance...

Dernière modification par Wilo98 (Le 18/06/2008, à 23:17)

inbox · Le 14/06/2008, à 16:05

Salut,

Les photos que tu as mises ne servent à rien. Ce qui est intéressant, sont les textes des messages après les [xxx.xxxxx]. Il faut donc les indiquer pour que l'on puisse avoir ue idée du problème.

Il faut probablement démarrer avec une des options de secours pour corriger le problème.

A+

Wilo98 · Le 14/06/2008, à 16:41

Un simple clic droit->afficher l'image et il est ainsi possible de voir l'ecran en entier, firefox (ou autre) ajustant l'image à la taille de la fenètre.

Merci pour le liens, mais mon système est installé. c'est là que le bas blaisse... Le cd live fonctionne trés bien. J'accede au partition et déplace les fichier sans problème. D'ailleur, mon premier post a été envoyé depuis une cession live.

J'ai pu noter que c'est plantage arrive lors d'écriture sur le disque(peut etre une coïncidence) par exemple, téléchargement de nouvelle appli via apt-get, ou intall des logiciels...

Tout à l'heure, ça me l'a fait alors que j'etait en train de valider des parametre pour compiz...

Edit : Texte laissé pour comprendre le fil de la discussion, 
mais les images ont été redimensionnée pour une lecture plus simple du post

Dernière modification par Wilo98 (Le 19/06/2008, à 17:58)

inbox · Le 14/06/2008, à 17:24

Le titre du wiki est trompeur. En réalité ce sont des options de démarrage et non pas uniquement d'installation.

Il faudrait que tu testes ce qui suis.

Lors du démarrage de Grub (affichage de la liste des noyaux disponibles), en étant positionné sur le noyau de Hardy -ligne du haut- :

1/ appuies sur la touche "e"
2/ choisis la ligne débutant par "kernel"
3/ appuies sur la touche "e"
4/ à la fin de la ligne, supprimes "quiet splash" (pour ne plus avoir la barre qui défile mais les messages de démarrage du système)
5/ ajoutes all_generic_ide
6/ valides avec la touche "entrée"
7/ appuies sur la touche "b" pour démarrer

Si tu arrives à démarrer, il faudra modifier menu.lst pour ajouter all_generic_ide sur chaque ligne de boot.

Wilo98 · Le 14/06/2008, à 17:56

Merci pour ton coup de main...

C'est ce qui resoud le problème ou c'est pour voir ce qu'il se passe...???
Pourquoi doit on passer ce parametre au noyau pour que ça fonctionne...???

Bin oui, suis un peu currieux....

Sinon, je viens de mettre ces paramètre là, on verra bien. Au reboot, je n'ai vu aucun message d'erreur...

Dernière modification par Wilo98 (Le 14/06/2008, à 17:58)

inbox · Le 14/06/2008, à 19:04

Tu l'as donc ajouté dans menu.lst ?

Si tu ne l'as pas encore fait, il suffit de suivre ce qui est indiqué dans le lien fournit dans le paragraphe Après l'installation.

Si c'est OK, penses à passer ton sujet en résolu.

Wilo98 · Le 15/06/2008, à 13:47

Oui, paramètre rajouté...

Mais ça continue à dysfonctionner... Je peux me servir de la machine un certain temps (assez aléatoire, 5,10 minutes, voir plus...) mais ça continue à se figer.

J'ai remarqué qu'en laissant la machine ne rien faire (pour aller manger par exemple) en revenant, il faut rebooter. Plus d'acces au disque ou logiciel présent sur la machine. Compiz continue de fonctionner, mais c'est tout.

Pas tres pratique cette histoire... Quel log faudrai t il que je post pour vous aider à cerner le problème?
Merci d'avance...

Dernière modification par Wilo98 (Le 15/06/2008, à 13:57)

inbox · Le 16/06/2008, à 00:13

Une des log's à analyser est /var/log/dmesg.

Par contre comme elle peut être volumineuse, ne colles que la partie la plus récente. Celle de 5 à 10 dernières minutes (entre balises code).

Wilo98 · Le 16/06/2008, à 17:40

Pour ce log, il semble que le système en crée un à chaque boot en prenant soin de renomer le précédent (en dmsg.0) et d'archiver (en dsmg.1.gz) celui qui précède le précédent (et ainsi de suite, on pourrai aller loin comme ça).

Par contre, je viens de penser que si il s'agit d'un problème d'accés au disque, le système est incapable d'écrire ce fichier au moment du bogue.

Donc, c'est pour ça que je poste 2 logs :
Le premier, sans plantage (juste un démarage, log sur mon compte et lecture du post précédent et extincion normal) :

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-18-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 20:27:26 UTC 2008 (Ubuntu 2.6.24-18.32-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[    0.000000]  BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 126MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f39a0
[    0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   261872
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   261872
[    0.000000] On node 0 totalpages: 261872
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 253 pages used for memmap
[    0.000000]   HighMem zone: 32243 pages, LIFO batch:7
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F78C0 checksum 0
[    0.000000] ACPI: RSDP 000F78C0, 0014 (r0 VIAK8M)
[    0.000000] ACPI: RSDT 3FEF3040, 002C (r1 VIAK8M AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 3FEF30C0, 0074 (r1 VIAK8M AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 3FEF3180, 5396 (r1 VIAK8M AWRDACPI     1000 MSFT  100000E)
[    0.000000] ACPI: FACS 3FEF0000, 0040
[    0.000000] ACPI: APIC 3FEF8580, 0068 (r1 VIAK8M AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:11 APIC version 16
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:11 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259827
[    0.000000] Kernel command line: root=UUID=411a521f-3780-452f-955b-22db07567c7c ro quiet splash all_generic_ide
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 2400.118 MHz processor.
[   26.569858] Console: colour VGA+ 80x25
[   26.569861] console [tty0] enabled
[   26.570169] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   26.570500] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   26.589405] Memory: 1026352k/1047488k available (2176k kernel code, 20492k reserved, 1006k data, 368k init, 129984k highmem)
[   26.589411] virtual kernel memory layout:
[   26.589412]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   26.589413]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   26.589414]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   26.589415]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   26.589416]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   26.589417]       .data : 0xc03201f4 - 0xc041bdc4   (1006 kB)
[   26.589418]       .text : 0xc0100000 - 0xc03201f4   (2176 kB)
[   26.589420] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   26.589448] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   26.669353] Calibrating delay using timer specific routine.. 4805.81 BogoMIPS (lpj=9611634)
[   26.669374] Security Framework initialized
[   26.669379] SELinux:  Disabled at boot.
[   26.669391] AppArmor: AppArmor initialized
[   26.669394] Failure registering capabilities with primary security module.
[   26.669401] Mount-cache hash table entries: 512
[   26.669492] Initializing cgroup subsys ns
[   26.669495] Initializing cgroup subsys cpuacct
[   26.669502] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
[   26.669509] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   26.669511] CPU: L2 Cache: 512K (64 bytes/line)
[   26.669513] CPU 0(2) -> Core 0
[   26.669515] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000
[   26.669523] Compat vDSO mapped to ffffe000.
[   26.669532] Checking 'hlt' instruction... OK.
[   26.685557] SMP alternatives: switching to UP code
[   26.686515] Early unpacking initramfs... done
[   26.941166] ACPI: Core revision 20070126
[   26.941212] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   27.146149] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[   27.146164] SMP alternatives: switching to SMP code
[   27.146499] Booting processor 1/1 eip 3000
[   27.156959] Initializing CPU#1
[   27.236968] Calibrating delay using timer specific routine.. 4800.25 BogoMIPS (lpj=9600507)
[   27.236973] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
[   27.236978] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   27.236980] CPU: L2 Cache: 512K (64 bytes/line)
[   27.236982] CPU 1(2) -> Core 1
[   27.236983] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000
[   27.236599] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[   27.236614] Total of 2 processors activated (9606.07 BogoMIPS).
[   27.237115] ENABLING IO-APIC IRQs
[   27.237436] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[   27.384342] Brought up 2 CPUs
[   27.384395] CPU0 attaching sched-domain:
[   27.384397]  domain 0: span 03
[   27.384398]   groups: 01 02
[   27.384400] CPU1 attaching sched-domain:
[   27.384402]  domain 0: span 03
[   27.384403]   groups: 02 01
[   27.384556] net_namespace: 64 bytes
[   27.384562] Booting paravirtualized kernel on bare hardware
[   27.384937] Time: 15:04:43  Date: 06/16/08
[   27.384955] NET: Registered protocol family 16
[   27.385093] EISA bus registered
[   27.385097] ACPI: bus type pci registered
[   27.392599] PCI: PCI BIOS revision 2.10 entry at 0xfa5d0, last bus=1
[   27.392601] PCI: Using configuration type 1
[   27.392602] Setting up standard PCI resources
[   27.396173] ACPI: EC: Look up EC in DSDT
[   27.400410] ACPI: Interpreter enabled
[   27.400414] ACPI: (supports S0 S1 S4 S5)
[   27.400426] ACPI: Using IOAPIC for interrupt routing
[   27.405267] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   27.406050] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   27.440218] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[   27.440344] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[   27.440471] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
[   27.440584] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   27.440694] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   27.440800] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   27.440907] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   27.441012] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   27.441142] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[   27.441262] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[   27.441382] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[   27.441522] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
[   27.441604] Linux Plug and Play Support v0.97 (c) Adam Belay
[   27.441625] pnp: PnP ACPI init
[   27.441630] ACPI: bus type pnp registered
[   27.444661] pnp: PnP ACPI: found 14 devices
[   27.444663] ACPI: ACPI bus type pnp unregistered
[   27.444666] PnPBIOS: Disabled by ACPI PNP
[   27.444826] PCI: Using ACPI for IRQ routing
[   27.444828] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   27.480122] NET: Registered protocol family 8
[   27.480123] NET: Registered protocol family 20
[   27.480172] AppArmor: AppArmor Filesystem Enabled
[   27.492123] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[   27.492125] system 00:00: iomem range 0x3ff00000-0x3fffffff has been reserved
[   27.492127] system 00:00: iomem range 0x3fef0000-0x3fefffff could not be reserved
[   27.492130] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[   27.492132] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[   27.492134] system 00:00: iomem range 0x100000-0x3feeffff could not be reserved
[   27.492136] system 00:00: iomem range 0x0-0x0 could not be reserved
[   27.492138] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[   27.492141] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[   27.492143] system 00:00: iomem range 0xfff80000-0xfffeffff could not be reserved
[   27.492148] system 00:02: ioport range 0x4000-0x407f has been reserved
[   27.492150] system 00:02: ioport range 0x5000-0x500f has been reserved
[   27.492155] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[   27.492157] system 00:03: ioport range 0x290-0x297 has been reserved
[   27.522410] PCI: Bridge: 0000:00:01.0
[   27.522411]   IO window: disabled.
[   27.522414]   MEM window: f8000000-faffffff
[   27.522417]   PREFETCH window: e0000000-efffffff
[   27.522430] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   27.522439] NET: Registered protocol family 2
[   27.524048] Time: acpi_pm clocksource has been installed.
[   27.524062] Switched to high resolution mode on CPU 0
[   27.524628] Switched to high resolution mode on CPU 1
[   27.560019] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   27.560250] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   27.560983] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   27.561355] TCP: Hash tables configured (established 131072 bind 65536)
[   27.561357] TCP reno registered
[   27.572052] checking if image is initramfs... it is
[   28.062433] Freeing initrd memory: 7323k freed
[   28.063558] audit: initializing netlink socket (disabled)
[   28.063569] audit(1213628683.168:1): initialized
[   28.063697] highmem bounce pool size: 64 pages
[   28.065153] VFS: Disk quotas dquot_6.5.1
[   28.065207] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   28.065295] io scheduler noop registered
[   28.065297] io scheduler anticipatory registered
[   28.065298] io scheduler deadline registered
[   28.065306] io scheduler cfq registered (default)
[   28.065313] PCI: VIA PCI bridge detected. Disabling DAC.
[   28.065377] Boot video device is 0000:01:00.0
[   28.065590] isapnp: Scanning for PnP cards...
[   28.418805] isapnp: No Plug & Play device found
[   28.440539] Real Time Clock Driver v1.12ac
[   28.440623] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   28.440726] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   28.440837] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   28.441246] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   28.441450] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   28.442065] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   28.442115] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   28.442188] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   28.442555] serio: i8042 KBD port at 0x60,0x64 irq 1
[   28.442559] serio: i8042 AUX port at 0x60,0x64 irq 12
[   28.456061] mice: PS/2 mouse device common for all mice
[   28.456156] EISA: Probing bus 0 at eisa.0
[   28.456174] Cannot allocate resource for EISA slot 4
[   28.456175] Cannot allocate resource for EISA slot 5
[   28.456187] EISA: Detected 0 cards.
[   28.456190] cpuidle: using governor ladder
[   28.456191] cpuidle: using governor menu
[   28.456259] NET: Registered protocol family 1
[   28.456276] Using IPI No-Shortcut mode
[   28.456304] registered taskstats version 1
[   28.456384]   Magic number: 12:305:83
[   28.456508] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   28.456510] EDD information not available.
[   28.456721] Freeing unused kernel memory: 368k freed
[   28.476953] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   28.548262] SCSI subsystem initialized
[   28.552949] libata version 3.00 loaded.
[   28.554106] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[   28.554112] ACPI: PCI Interrupt 0000:00:0f.0[b] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[   28.554206] scsi0 : ata_generic
[   28.554262] scsi1 : ata_generic
[   28.555175] ata1: PATA max UDMA/100 cmd 0xe100 ctl 0xe700 bmdma 0xe000 irq 16
[   28.555177] ata2: PATA max UDMA/100 cmd 0xe800 ctl 0xe900 bmdma 0xe008 irq 16
[   28.884919] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[   28.885002] scsi2 : ata_generic
[   28.885052] scsi3 : ata_generic
[   28.885901] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xe200 irq 14
[   28.885903] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xe208 irq 15
[   29.377830] ata3.00: ATA-7: Maxtor 6E040L0, NAR61GA0, max UDMA/133
[   29.377833] ata3.00: 80293248 sectors, multi 16: LBA 
[   29.377849] ata3.01: ATAPI: LITE-ON LTR-40125W, WS03, max UDMA/33
[   29.377858] ata3.00: configured for UDMA/133
[   29.377860] ata3.01: configured for UDMA/33
[   29.544440] scsi 2:0:0:0: Direct-Access     ATA      Maxtor 6E040L0   NAR6 PQ: 0 ANSI: 5
[   29.549141] scsi 2:0:1:0: CD-ROM            LITE-ON  LTR-40125W       WS03 PQ: 0 ANSI: 5
[   30.668601] fuse init (API version 7.9)
[   30.681193] ACPI: Fan [FAN] (on)
[   30.686429] ACPI: Thermal Zone [THRM] (40 C)
[   31.036996] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[   31.037001] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[   31.037216] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[   31.037221] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 17
[   31.037415] eth0: VIA Rhine II at 0xfb001000, 00:19:db:21:bd:3f, IRQ 17.
[   31.038122] eth0: MII PHY found at address 1, status 0x786d advertising 0101 Link 41e1.
[   31.097310] usbcore: registered new interface driver usbfs
[   31.097328] usbcore: registered new interface driver hub
[   31.099251] Driver 'sd' needs updating - please use bus_type methods
[   31.099317] sd 2:0:0:0: [sda] 80293248 512-byte hardware sectors (41110 MB)
[   31.099326] sd 2:0:0:0: [sda] Write Protect is off
[   31.099328] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   31.099341] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   31.099380] sd 2:0:0:0: [sda] 80293248 512-byte hardware sectors (41110 MB)
[   31.099387] sd 2:0:0:0: [sda] Write Protect is off
[   31.099389] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   31.099399] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   31.099402]  sda:<6>usbcore: registered new device driver usb
[   31.101867] Driver 'sr' needs updating - please use bus_type methods
[   31.104063] USB Universal Host Controller Interface driver v3.0
[   31.104291] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[   31.104297] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[   31.104306] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   31.104540] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[   31.104566] uhci_hcd 0000:00:10.0: irq 18, io base 0x0000e300
[   31.104671] usb usb1: configuration #1 chosen from 1 choice
[   31.104688] hub 1-0:1.0: USB hub found
[   31.104692] hub 1-0:1.0: 2 ports detected
[   31.122690] Floppy drive(s): fd0 is 1.44M
[   31.141975] FDC 0 is a post-1991 82077
[   31.207545] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[   31.207555] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   31.207576] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[   31.207595] uhci_hcd 0000:00:10.1: irq 18, io base 0x0000e400
[   31.207679] usb usb2: configuration #1 chosen from 1 choice
[   31.207695] hub 2-0:1.0: USB hub found
[   31.207699] hub 2-0:1.0: 2 ports detected
[   31.311381] ACPI: PCI Interrupt 0000:00:10.2[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[   31.311393] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   31.311411] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[   31.311431] uhci_hcd 0000:00:10.2: irq 18, io base 0x0000e500
[   31.311516] usb usb3: configuration #1 chosen from 1 choice
[   31.311533] hub 3-0:1.0: USB hub found
[   31.311537] hub 3-0:1.0: 2 ports detected
[   31.415213] ACPI: PCI Interrupt 0000:00:10.3[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[   31.415224] uhci_hcd 0000:00:10.3: UHCI Host Controller
[   31.415243] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[   31.415263] uhci_hcd 0000:00:10.3: irq 18, io base 0x0000e600
[   31.415346] usb usb4: configuration #1 chosen from 1 choice
[   31.415362] hub 4-0:1.0: USB hub found
[   31.415366] hub 4-0:1.0: 2 ports detected
[   31.518560] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[   31.518573] ehci_hcd 0000:00:10.4: EHCI Host Controller
[   31.518601] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[   31.518638] ehci_hcd 0000:00:10.4: irq 18, io mem 0xfb000000
[   31.574862] usb 1-2: new full speed USB device using uhci_hcd and address 2
[   31.585345] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   31.585434] usb usb5: configuration #1 chosen from 1 choice
[   31.585454] hub 5-0:1.0: USB hub found
[   31.585459] hub 5-0:1.0: 8 ports detected
[   33.225301]  sda1 sda2 sda3
[   33.246142] sd 2:0:0:0: [sda] Attached SCSI disk
[   33.250420] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   33.250438] sr 2:0:1:0: Attached scsi generic sg1 type 5
[   33.321411] sr0: scsi3-mmc drive: 107x/48x writer cd/rw xa/form2 cdda tray
[   33.321416] Uniform CD-ROM driver Revision: 3.20
[   33.321462] sr 2:0:1:0: Attached scsi CD-ROM sr0
[   33.367896] usb 2-2: new full speed USB device using uhci_hcd and address 2
[   33.543057] usb 2-2: configuration #1 chosen from 1 choice
[   33.545993] hub 2-2:1.0: USB hub found
[   33.547982] hub 2-2:1.0: 4 ports detected
[   33.812935] Attempting manual resume
[   33.812938] swsusp: Resume From Partition 8:3
[   33.812939] PM: Checking swsusp image.
[   33.813123] PM: Resume from disk failed.
[   33.821718] EXT3-fs: INFO: recovery required on readonly filesystem.
[   33.821722] EXT3-fs: write access will be enabled during recovery.
[   33.895022] usb 4-1: new full speed USB device using uhci_hcd and address 2
[   34.068382] usb 4-1: configuration #1 chosen from 1 choice
[   34.310354] usb 1-2: new full speed USB device using uhci_hcd and address 3
[   34.477427] usb 1-2: configuration #1 chosen from 1 choice
[   34.683220] usb 2-2.1: new low speed USB device using uhci_hcd and address 3
[   34.825065] usb 2-2.1: configuration #1 chosen from 1 choice
[   35.033665] usb 2-2.4: new full speed USB device using uhci_hcd and address 4
[   35.177513] usb 2-2.4: configuration #1 chosen from 1 choice
[   35.188645] usbcore: registered new interface driver libusual
[   35.188915] usbcore: registered new interface driver hiddev
[   35.193078] Initializing USB Mass Storage driver...
[   35.193985] scsi4 : SCSI emulation for USB Mass Storage devices
[   35.194595] usb-storage: device found at 2
[   35.194597] usb-storage: waiting for device to settle before scanning
[   35.203563] input: Logitech Logitech Gaming Keyboard as /devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2.1/2-2.1:1.0/input/input2
[   35.220896] input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech Gaming Keyboard] on usb-0000:00:10.1-2.1
[   35.220920] usbcore: registered new interface driver usb-storage
[   35.220923] USB Mass Storage support registered.
[   35.252375] input: Logitech Logitech Gaming Keyboard as /devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2.1/2-2.1:1.1/input/input3
[   35.260810] input,hiddev96,hidraw1: USB HID v1.10 Device [Logitech Logitech Gaming Keyboard] on usb-0000:00:10.1-2.1
[   35.266371] input: G15 Keyboard G15 Keyboard as /devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2.4/2-2.4:1.0/input/input4
[   35.280771] input,hiddev97,hidraw2: USB HID v1.11 Keypad [G15 Keyboard G15 Keyboard] on usb-0000:00:10.1-2.4
[   35.280786] usbcore: registered new interface driver usbhid
[   35.280789] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   36.179240] kjournald starting.  Commit interval 5 seconds
[   36.179260] EXT3-fs: sda1: orphan cleanup on readonly fs
[   36.179265] ext3_orphan_cleanup: deleting unreferenced inode 563107
[   36.179293] ext3_orphan_cleanup: deleting unreferenced inode 563106
[   36.179300] ext3_orphan_cleanup: deleting unreferenced inode 563103
[   36.179615] ext3_orphan_cleanup: deleting unreferenced inode 563102
[   36.179640] ext3_orphan_cleanup: deleting unreferenced inode 563101
[   36.179647] ext3_orphan_cleanup: deleting unreferenced inode 563104
[   36.179655] ext3_orphan_cleanup: deleting unreferenced inode 563100
[   36.179661] ext3_orphan_cleanup: deleting unreferenced inode 563098
[   36.179668] ext3_orphan_cleanup: deleting unreferenced inode 563097
[   36.179674] ext3_orphan_cleanup: deleting unreferenced inode 563096
[   36.179682] ext3_orphan_cleanup: deleting unreferenced inode 563052
[   36.179687] EXT3-fs: sda1: 11 orphan inodes deleted
[   36.179688] EXT3-fs: recovery complete.
[   36.195173] EXT3-fs: mounted filesystem with ordered data mode.
[   40.186646] usb-storage: device scan complete
[   40.193624] scsi 4:0:0:0: Direct-Access     Brother  DCP-117C         1.00 PQ: 0 ANSI: 2
[   40.212614] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[   40.212637] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   46.054464] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   46.373412] Linux agpgart interface v0.102
[   46.394062] agpgart: Detected AGP bridge 0
[   46.398195] agpgart: AGP aperture is 128M @ 0xf0000000
[   46.414333] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   46.510416] input: Power Button (FF) as /devices/virtual/input/input6
[   46.550339] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   46.709972] ACPI: Power Button (FF) [PWRF]
[   46.710023] input: Power Button (CM) as /devices/virtual/input/input7
[   46.765859] ACPI: Power Button (CM) [PWRB]
[   46.772261] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input8
[   46.824437] parport_pc 00:0b: reported by Plug and Play ACPI
[   46.824487] parport0: PC-style at 0x378, irq 7 [PCSPP]
[   47.330828] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x018E
[   47.330848] usbcore: registered new interface driver usblp
[   47.362534] nvidia: module license 'NVIDIA' taints kernel.
[   47.618447] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
[   47.618648] NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008
[   47.639898] Linux video capture interface: v2.00
[   47.692895] quickcam: QuickCam USB camera found (driver version QuickCam USB 0.6.6 $Date: 2006/11/04 08:38:14 $)
[   47.692900] quickcam: Kernel:2.6.24-18-generic bus:1 class:FF subclass:FF vendor:046D product:0870
[   47.701748] quickcam: Sensor HDCS-1020 detected
[   47.703795] quickcam: Registered device: /dev/video0
[   47.703821] usbcore: registered new interface driver quickcam
[   47.764817] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[   47.764823] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 20
[   47.764956] PCI: Setting latency timer of device 0000:00:11.5 to 64
[   49.205428] lp0: using parport0 (interrupt-driven).
[   49.249603] Adding 2096472k swap on /dev/sda3.  Priority:-1 extents:1 across:2096472k
[   49.789496] EXT3 FS on sda1, internal journal
[   50.556223] kjournald starting.  Commit interval 5 seconds
[   50.556486] EXT3 FS on sda2, internal journal
[   50.556488] EXT3-fs: recovery complete.
[   50.556703] EXT3-fs: mounted filesystem with ordered data mode.
[   50.918549] ip_tables: (C) 2000-2006 Netfilter Core Team

Et le second correspondant à une cession d'hier soir ou le système s'est figé et a étét arrété grace au touches magiques :

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-18-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 20:27:26 UTC 2008 (Ubuntu 2.6.24-18.32-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[    0.000000]  BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 126MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f39a0
[    0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   261872
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   261872
[    0.000000] On node 0 totalpages: 261872
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 253 pages used for memmap
[    0.000000]   HighMem zone: 32243 pages, LIFO batch:7
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F78C0 checksum 0
[    0.000000] ACPI: RSDP 000F78C0, 0014 (r0 VIAK8M)
[    0.000000] ACPI: RSDT 3FEF3040, 002C (r1 VIAK8M AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 3FEF30C0, 0074 (r1 VIAK8M AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 3FEF3180, 5396 (r1 VIAK8M AWRDACPI     1000 MSFT  100000E)
[    0.000000] ACPI: FACS 3FEF0000, 0040
[    0.000000] ACPI: APIC 3FEF8580, 0068 (r1 VIAK8M AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:11 APIC version 16
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:11 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259827
[    0.000000] Kernel command line: root=UUID=411a521f-3780-452f-955b-22db07567c7c ro quiet splash all_generic_ide
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 2400.123 MHz processor.
[   21.375444] Console: colour VGA+ 80x25
[   21.375447] console [tty0] enabled
[   21.375756] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   21.376087] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   21.394994] Memory: 1026352k/1047488k available (2176k kernel code, 20492k reserved, 1006k data, 368k init, 129984k highmem)
[   21.395000] virtual kernel memory layout:
[   21.395001]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   21.395002]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   21.395003]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   21.395004]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   21.395005]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   21.395006]       .data : 0xc03201f4 - 0xc041bdc4   (1006 kB)
[   21.395007]       .text : 0xc0100000 - 0xc03201f4   (2176 kB)
[   21.395009] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   21.395037] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   21.474942] Calibrating delay using timer specific routine.. 4805.79 BogoMIPS (lpj=9611591)
[   21.474963] Security Framework initialized
[   21.474969] SELinux:  Disabled at boot.
[   21.474981] AppArmor: AppArmor initialized
[   21.474984] Failure registering capabilities with primary security module.
[   21.474990] Mount-cache hash table entries: 512
[   21.475081] Initializing cgroup subsys ns
[   21.475084] Initializing cgroup subsys cpuacct
[   21.475092] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
[   21.475099] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   21.475101] CPU: L2 Cache: 512K (64 bytes/line)
[   21.475103] CPU 0(2) -> Core 0
[   21.475104] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000
[   21.475112] Compat vDSO mapped to ffffe000.
[   21.475121] Checking 'hlt' instruction... OK.
[   21.491146] SMP alternatives: switching to UP code
[   21.492105] Early unpacking initramfs... done
[   21.746762] ACPI: Core revision 20070126
[   21.746809] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   21.950022] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[   21.950038] SMP alternatives: switching to SMP code
[   21.950386] Booting processor 1/1 eip 3000
[   21.960816] Initializing CPU#1
[   22.038534] Calibrating delay using timer specific routine.. 4800.21 BogoMIPS (lpj=9600429)
[   22.038539] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
[   22.038545] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   22.038546] CPU: L2 Cache: 512K (64 bytes/line)
[   22.038548] CPU 1(2) -> Core 1
[   22.038549] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000
[   22.038194] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[   22.038209] Total of 2 processors activated (9606.01 BogoMIPS).
[   22.038710] ENABLING IO-APIC IRQs
[   22.039031] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[   22.185938] Brought up 2 CPUs
[   22.185990] CPU0 attaching sched-domain:
[   22.185992]  domain 0: span 03
[   22.185993]   groups: 01 02
[   22.185996] CPU1 attaching sched-domain:
[   22.185997]  domain 0: span 03
[   22.185998]   groups: 02 01
[   22.186152] net_namespace: 64 bytes
[   22.186158] Booting paravirtualized kernel on bare hardware
[   22.186533] Time: 20:34:47  Date: 06/15/08
[   22.186552] NET: Registered protocol family 16
[   22.186690] EISA bus registered
[   22.186693] ACPI: bus type pci registered
[   22.194194] PCI: PCI BIOS revision 2.10 entry at 0xfa5d0, last bus=1
[   22.194196] PCI: Using configuration type 1
[   22.194198] Setting up standard PCI resources
[   22.197771] ACPI: EC: Look up EC in DSDT
[   22.202009] ACPI: Interpreter enabled
[   22.202014] ACPI: (supports S0 S1 S4 S5)
[   22.202025] ACPI: Using IOAPIC for interrupt routing
[   22.206803] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   22.207585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   22.241704] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[   22.241835] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[   22.241961] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
[   22.242075] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   22.242185] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   22.242291] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   22.242397] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   22.242502] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   22.242632] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[   22.242752] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[   22.242873] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[   22.243012] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
[   22.243094] Linux Plug and Play Support v0.97 (c) Adam Belay
[   22.243114] pnp: PnP ACPI init
[   22.243119] ACPI: bus type pnp registered
[   22.246150] pnp: PnP ACPI: found 14 devices
[   22.246151] ACPI: ACPI bus type pnp unregistered
[   22.246154] PnPBIOS: Disabled by ACPI PNP
[   22.246315] PCI: Using ACPI for IRQ routing
[   22.246317] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   22.281717] NET: Registered protocol family 8
[   22.281719] NET: Registered protocol family 20
[   22.281767] AppArmor: AppArmor Filesystem Enabled
[   22.293718] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[   22.293721] system 00:00: iomem range 0x3ff00000-0x3fffffff has been reserved
[   22.293723] system 00:00: iomem range 0x3fef0000-0x3fefffff could not be reserved
[   22.293725] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[   22.293727] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[   22.293730] system 00:00: iomem range 0x100000-0x3feeffff could not be reserved
[   22.293732] system 00:00: iomem range 0x0-0x0 could not be reserved
[   22.293734] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[   22.293737] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[   22.293739] system 00:00: iomem range 0xfff80000-0xfffeffff could not be reserved
[   22.293744] system 00:02: ioport range 0x4000-0x407f has been reserved
[   22.293746] system 00:02: ioport range 0x5000-0x500f has been reserved
[   22.293750] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[   22.293752] system 00:03: ioport range 0x290-0x297 has been reserved
[   22.324006] PCI: Bridge: 0000:00:01.0
[   22.324007]   IO window: disabled.
[   22.324011]   MEM window: f8000000-faffffff
[   22.324013]   PREFETCH window: e0000000-efffffff
[   22.324026] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   22.324035] NET: Registered protocol family 2
[   22.325644] Time: acpi_pm clocksource has been installed.
[   22.325657] Switched to high resolution mode on CPU 0
[   22.326194] Switched to high resolution mode on CPU 1
[   22.361614] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   22.361844] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   22.362575] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   22.362947] TCP: Hash tables configured (established 131072 bind 65536)
[   22.362949] TCP reno registered
[   22.373648] checking if image is initramfs... it is
[   22.864030] Freeing initrd memory: 7323k freed
[   22.865127] audit: initializing netlink socket (disabled)
[   22.865138] audit(1213562087.168:1): initialized
[   22.865266] highmem bounce pool size: 64 pages
[   22.866712] VFS: Disk quotas dquot_6.5.1
[   22.866765] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   22.866853] io scheduler noop registered
[   22.866855] io scheduler anticipatory registered
[   22.866856] io scheduler deadline registered
[   22.866864] io scheduler cfq registered (default)
[   22.866871] PCI: VIA PCI bridge detected. Disabling DAC.
[   22.866935] Boot video device is 0000:01:00.0
[   22.867148] isapnp: Scanning for PnP cards...
[   23.220274] isapnp: No Plug & Play device found
[   23.242020] Real Time Clock Driver v1.12ac
[   23.242103] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   23.242206] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   23.242318] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   23.242727] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   23.242932] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   23.243545] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   23.243595] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   23.243667] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   23.244033] serio: i8042 KBD port at 0x60,0x64 irq 1
[   23.244037] serio: i8042 AUX port at 0x60,0x64 irq 12
[   23.257629] mice: PS/2 mouse device common for all mice
[   23.257724] EISA: Probing bus 0 at eisa.0
[   23.257741] Cannot allocate resource for EISA slot 4
[   23.257743] Cannot allocate resource for EISA slot 5
[   23.257755] EISA: Detected 0 cards.
[   23.257757] cpuidle: using governor ladder
[   23.257759] cpuidle: using governor menu
[   23.257826] NET: Registered protocol family 1
[   23.257844] Using IPI No-Shortcut mode
[   23.257871] registered taskstats version 1
[   23.257951]   Magic number: 12:278:599
[   23.257954]   hash matches device serial8250
[   23.257999]   hash matches device ptyd3
[   23.258068]   hash matches device PNP0C0F:0b
[   23.258080] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   23.258082] EDD information not available.
[   23.258290] Freeing unused kernel memory: 368k freed
[   23.296078] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   23.350423] SCSI subsystem initialized
[   23.355113] libata version 3.00 loaded.
[   23.356271] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[   23.356277] ACPI: PCI Interrupt 0000:00:0f.0[b] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[   23.356371] scsi0 : ata_generic
[   23.356434] scsi1 : ata_generic
[   23.357346] ata1: PATA max UDMA/100 cmd 0xe100 ctl 0xe700 bmdma 0xe000 irq 16
[   23.357349] ata2: PATA max UDMA/100 cmd 0xe800 ctl 0xe900 bmdma 0xe008 irq 16
[   23.686564] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[   23.686648] scsi2 : ata_generic
[   23.686700] scsi3 : ata_generic
[   23.687553] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xe200 irq 14
[   23.687555] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xe208 irq 15
[   24.179395] ata3.00: ATA-7: Maxtor 6E040L0, NAR61GA0, max UDMA/133
[   24.179398] ata3.00: 80293248 sectors, multi 16: LBA 
[   24.179414] ata3.01: ATAPI: LITE-ON LTR-40125W, WS03, max UDMA/33
[   24.179423] ata3.00: configured for UDMA/133
[   24.179424] ata3.01: configured for UDMA/33
[   24.346168] scsi 2:0:0:0: Direct-Access     ATA      Maxtor 6E040L0   NAR6 PQ: 0 ANSI: 5
[   24.350870] scsi 2:0:1:0: CD-ROM            LITE-ON  LTR-40125W       WS03 PQ: 0 ANSI: 5
[   25.470086] fuse init (API version 7.9)
[   25.482430] ACPI: Fan [FAN] (on)
[   25.487749] ACPI: Thermal Zone [THRM] (40 C)
[   25.697185] usbcore: registered new interface driver usbfs
[   25.697203] usbcore: registered new interface driver hub
[   25.697223] usbcore: registered new device driver usb
[   25.698006] USB Universal Host Controller Interface driver v3.0
[   25.698234] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[   25.698239] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[   25.698248] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   25.698460] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[   25.698486] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000e300
[   25.698584] usb usb1: configuration #1 chosen from 1 choice
[   25.698600] hub 1-0:1.0: USB hub found
[   25.698604] hub 1-0:1.0: 2 ports detected
[   25.787530] Driver 'sd' needs updating - please use bus_type methods
[   25.787603] sd 2:0:0:0: [sda] 80293248 512-byte hardware sectors (41110 MB)
[   25.787613] sd 2:0:0:0: [sda] Write Protect is off
[   25.787615] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   25.787629] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   25.787662] sd 2:0:0:0: [sda] 80293248 512-byte hardware sectors (41110 MB)
[   25.787669] sd 2:0:0:0: [sda] Write Protect is off
[   25.787671] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   25.787681] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   25.787684]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   25.799994] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[   25.800005] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   25.800022] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[   25.800042] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000e400
[   25.800122] usb usb2: configuration #1 chosen from 1 choice
[   25.800138] hub 2-0:1.0: USB hub found
[   25.800142] hub 2-0:1.0: 2 ports detected
[   25.833922] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[   25.833926] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[   25.903849] ACPI: PCI Interrupt 0000:00:10.2[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[   25.903860] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   25.903878] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[   25.903898] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000e500
[   25.903980] usb usb3: configuration #1 chosen from 1 choice
[   25.903997] hub 3-0:1.0: USB hub found
[   25.904001] hub 3-0:1.0: 2 ports detected
[   25.910637] Floppy drive(s): fd0 is 1.44M
[   25.931686] FDC 0 is a post-1991 82077
[   26.007675] ACPI: PCI Interrupt 0000:00:10.3[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[   26.007686] uhci_hcd 0000:00:10.3: UHCI Host Controller
[   26.007703] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[   26.007723] uhci_hcd 0000:00:10.3: irq 17, io base 0x0000e600
[   26.007807] usb usb4: configuration #1 chosen from 1 choice
[   26.007824] hub 4-0:1.0: USB hub found
[   26.007827] hub 4-0:1.0: 2 ports detected
[   26.111564] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[   26.111576] ehci_hcd 0000:00:10.4: EHCI Host Controller
[   26.111596] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[   26.111627] ehci_hcd 0000:00:10.4: irq 17, io mem 0xfb000000
[   26.167310] usb 1-2: new full speed USB device using uhci_hcd and address 2
[   26.179312] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   26.179400] usb usb5: configuration #1 chosen from 1 choice
[   26.179417] hub 5-0:1.0: USB hub found
[   26.179422] hub 5-0:1.0: 8 ports detected
[   26.283445] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[   26.283452] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
[   26.283652] eth0: VIA Rhine II at 0xfb001000, 00:19:db:21:bd:3f, IRQ 18.
[   26.284359] eth0: MII PHY found at address 1, status 0x786d advertising 0101 Link 41e1.
[   27.912942]  sda1 sda2 sda3
[   27.933776] sd 2:0:0:0: [sda] Attached SCSI disk
[   27.939205] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   27.939220] sr 2:0:1:0: Attached scsi generic sg1 type 5
[   27.961810] usb 2-2: new full speed USB device using uhci_hcd and address 2
[   28.009810] sr0: scsi3-mmc drive: 107x/48x writer cd/rw xa/form2 cdda tray
[   28.009815] Uniform CD-ROM driver Revision: 3.20
[   28.009863] sr 2:0:1:0: Attached scsi CD-ROM sr0
[   28.132974] usb 2-2: configuration #1 chosen from 1 choice
[   28.135915] hub 2-2:1.0: USB hub found
[   28.137895] hub 2-2:1.0: 4 ports detected
[   28.425352] Attempting manual resume
[   28.425355] swsusp: Resume From Partition 8:3
[   28.425357] PM: Checking swsusp image.
[   28.425535] PM: Resume from disk failed.
[   28.462371] kjournald starting.  Commit interval 5 seconds
[   28.462855] EXT3-fs: mounted filesystem with ordered data mode.
[   28.484947] usb 4-1: new full speed USB device using uhci_hcd and address 2
[   28.654167] usb 4-1: configuration #1 chosen from 1 choice
[   28.896265] usb 1-2: new full speed USB device using uhci_hcd and address 3
[   29.062811] usb 1-2: configuration #1 chosen from 1 choice
[   29.269140] usb 2-2.1: new low speed USB device using uhci_hcd and address 3
[   29.411981] usb 2-2.1: configuration #1 chosen from 1 choice
[   29.620581] usb 2-2.4: new full speed USB device using uhci_hcd and address 4
[   29.764429] usb 2-2.4: configuration #1 chosen from 1 choice
[   36.916184] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   37.004677] Linux agpgart interface v0.102
[   37.055599] agpgart: Detected AGP bridge 0
[   37.059766] agpgart: AGP aperture is 128M @ 0xf0000000
[   37.235742] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   37.347636] input: Power Button (FF) as /devices/virtual/input/input3
[   37.384054] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   37.402307] ACPI: Power Button (FF) [PWRF]
[   37.402359] input: Power Button (CM) as /devices/virtual/input/input4
[   37.466221] ACPI: Power Button (CM) [PWRB]
[   37.552143] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[   37.612647] parport_pc 00:0b: reported by Plug and Play ACPI
[   37.612697] parport0: PC-style at 0x378, irq 7 [PCSPP]
[   37.959979] nvidia: module license 'NVIDIA' taints kernel.
[   38.281312] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
[   38.281507] NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008
[   38.292441] Linux video capture interface: v2.00
[   38.369010] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x018E
[   38.369027] usbcore: registered new interface driver usblp
[   38.445245] usbcore: registered new interface driver hiddev
[   38.459008] input: Logitech Logitech Gaming Keyboard as /devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2.1/2-2.1:1.0/input/input6
[   38.470504] quickcam: QuickCam USB camera found (driver version QuickCam USB 0.6.6 $Date: 2006/11/04 08:38:14 $)
[   38.470509] quickcam: Kernel:2.6.24-18-generic bus:1 class:FF subclass:FF vendor:046D product:0870
[   38.482094] quickcam: Sensor HDCS-1020 detected
[   38.484131] quickcam: Registered device: /dev/video0
[   38.512543] input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech Gaming Keyboard] on usb-0000:00:10.1-2.1
[   38.543771] input: Logitech Logitech Gaming Keyboard as /devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2.1/2-2.1:1.1/input/input7
[   38.592394] input,hiddev96,hidraw1: USB HID v1.10 Device [Logitech Logitech Gaming Keyboard] on usb-0000:00:10.1-2.1
[   38.593812] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[   38.593818] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 20
[   38.593953] PCI: Setting latency timer of device 0000:00:11.5 to 64
[   38.597711] input: G15 Keyboard G15 Keyboard as /devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2.4/2-2.4:1.0/input/input8
[   38.644321] input,hiddev97,hidraw2: USB HID v1.11 Keypad [G15 Keyboard G15 Keyboard] on usb-0000:00:10.1-2.4
[   38.644338] usbcore: registered new interface driver usbhid
[   38.644341] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   38.644468] usbcore: registered new interface driver libusual
[   38.644530] usbcore: registered new interface driver quickcam
[   38.664459] Initializing USB Mass Storage driver...
[   38.665608] scsi4 : SCSI emulation for USB Mass Storage devices
[   38.665667] usbcore: registered new interface driver usb-storage
[   38.665670] USB Mass Storage support registered.
[   38.665760] usb-storage: device found at 2
[   38.665761] usb-storage: waiting for device to settle before scanning
[   40.019407] lp0: using parport0 (interrupt-driven).
[   40.072165] Adding 2096472k swap on /dev/sda3.  Priority:-1 extents:1 across:2096472k
[   40.612387] EXT3 FS on sda1, internal journal
[   41.415711] kjournald starting.  Commit interval 5 seconds
[   41.416376] EXT3 FS on sda2, internal journal
[   41.416381] EXT3-fs: mounted filesystem with ordered data mode.
[   41.831725] ip_tables: (C) 2000-2006 Netfilter Core Team

Voilà, en espérant que quelqu'un y verra quelque chose qui nous permettent de venir à bout de se problème.

J'ai noté l'apparition de ceci dans le log lors d'un redémarage après un plantage :

[   36.179260] EXT3-fs: sda1: orphan cleanup on readonly fs
[   36.179265] ext3_orphan_cleanup: deleting unreferenced inode 563107
[   36.179293] ext3_orphan_cleanup: deleting unreferenced inode 563106
[   36.179300] ext3_orphan_cleanup: deleting unreferenced inode 563103
[   36.179615] ext3_orphan_cleanup: deleting unreferenced inode 563102
[   36.179640] ext3_orphan_cleanup: deleting unreferenced inode 563101
[   36.179647] ext3_orphan_cleanup: deleting unreferenced inode 563104
[   36.179655] ext3_orphan_cleanup: deleting unreferenced inode 563100
[   36.179661] ext3_orphan_cleanup: deleting unreferenced inode 563098
[   36.179668] ext3_orphan_cleanup: deleting unreferenced inode 563097
[   36.179674] ext3_orphan_cleanup: deleting unreferenced inode 563096
[   36.179682] ext3_orphan_cleanup: deleting unreferenced inode 563052
[   36.179687] EXT3-fs: sda1: 11 orphan inodes deleted
[   36.179688] EXT3-fs: recovery complete.
[   36.195173] EXT3-fs: mounted filesystem with ordered data mode.

Voilou, et merci pour votre attention...

Dernière modification par Wilo98 (Le 16/06/2008, à 17:51)

Wilo98 · Le 16/06/2008, à 18:19

Heuuuu, un petite précision : J'ai installé la version pour PC standard et j'utilise un processeur AMD 64 X2 dual core, alors faut peut etre que j'installe la version 64bits...

Non, je me trompe... Au moment du dl, je ne me suis pas posé la question et j'ai pensé avoir un prosso 32bits... Si c'est ça, je suis vraiment un C.. .
Et dans ce cas, il faut refaire une install complète ou patchage est possible....

Schuuuuuussssssssssssssssssss

chiron · Le 16/06/2008, à 21:59

Machine qui se fige? Je commencerais par un dépoussiérage en règle de l'intérieur de la tour.

malbo · Le 16/06/2008, à 22:10

Wilo98 a écrit :

J'ai installé la version pour PC standard et j'utilise un processeur AMD 64 X2 dual core, alors faut peut etre que j'installe la version 64bits...

Ce n'est pas un problème. Tu peux utiliser la version standard 32 bits.

Wilo98 · Le 16/06/2008, à 22:43

Oki Malbo, merci pour l'info.

Mais si la version 32bits est bien supporté par les prosso 64, à quoi sert la version 64???
Mon système sera plus rapide avec le noyau complilé pour l'AMD64 ou cela devient seulement interressant quand on utilise des appli 64.???

Sinon, pour en revenir à nos moutons,

chiron a écrit :

Machine qui se fige? Je commencerais par un dépoussiérage en règle de l'intérieur de la tour.

merci pour ton idée mais la machine a été monté il y a à peu pré un ans et en avril elle a fait un court sejour chez mon assembleur préféré car la carte mêre ne se lancez plus... (Assembleur préféré , il qui m'a quand même pris 30€ de main d'oeuvre pour me dire que tout aller bien et un simple retrait de la pile avait permis de relancer la grosse berta.... grrrr, j'aurai pu le faire ça, moi... mais les pièces était encore sous garantie)...
De plus, ma machine tournait sur windows (tout pouri et virulé comme il faut, on se refait pas) et ne se figeait pas comme ça, même tres solicitée....

Bref, tout ça pour te dire que d'un point de vue mécanique, la machine va bien...

Dernière modification par Wilo98 (Le 16/06/2008, à 22:50)

inbox · Le 16/06/2008, à 23:11

Il ne semble pas y avoir d'erreur dans la log. De plus les lignes que tu as remarquées sont dues au fait que le système n'ai pas été arrêtée correctement

EXT3-fs: recovery complete.

Rien ne t'empêche de tester la version 64 bits afin de vérifier si cela tourne mieux.

Wilo98 · Le 17/06/2008, à 17:34

C'est bien ce dont je me douter...

Et c'est là que le bas blesse car au moment du bug, j'utilise toujours les 'touches magiques' avec la combinaison Alt+Sysrq+b qui :

"Tente de remonter tous les systèmes de fichiers montés en lecture seule. Ceci retire le marquage « dirty flag » et évitera ainsi une vérification du système de fichiers au redémarrage".

d''après la documentation d'UBUNTU. Vraisemblablement, ce n'est pas le cas... Puisque la vérification du système de fichiers se fait quand même...

Sinon, hier soir la machine a tourné de 17h jusqu'a minuit sans provoquer un seul freeze...

Mis à part ça, quels sont les avantages de la version 64 par rapport au noyau 32bitd qui supporte les prosso 64...???

Encore merci pour ton aide Inbox... @ plus...

Dernière modification par Wilo98 (Le 17/06/2008, à 17:53)

inbox · Le 17/06/2008, à 18:49

La version 64 bits est tout simplement optimisée (compilée) pour les processeurs dudit modèle. Il a aussi l'avantage de pouvoir gérer de bien plus grandes quantités de mémoire.

Un peu de doc pas forcément totalement à jour :
http://fr.wikipedia.org/wiki/AMD_64
http://doc.ubuntu-fr.org/ubuntu_64bits

Wilo98 · Le 18/06/2008, à 00:07

Oki,

donc, après lecture des docs, je conserve la version 32Bits.

Par contre, j'ai un petit peu oublié de le préciser, mais vraisemblablement le paramètre 'all_generic_ide' n'a pas l'air d'être passé au noyau.

Je m'explique :
Sans ce paramètre, au boot, juste apres le lancement de grub et avant que l'usplasch ne s'affiche, on a droit a une petit phase nous invitant à patienter, c'est normal...

Avec le paramètre 'all_generic_ide', on voit bien le petit 'please wait' mais dessous, on voit apparaitre la ligne :

root=UUID=411a521f-3780-452f-955b-22db07567c7c ro all_generic_ide quiet splash

Est-ce normal, le noyau m'indique qu'il démarre avec des paramètres peu habituelle ou tout simplement pour me dire qu'il ne comprend pas la commande...

Car avec ou sans ce paramètre, le système plante quand même... J'y ai eu droit ce soir...

inbox · Le 18/06/2008, à 00:34

Concernant le paramètre, ce n'était qu'un essai.

Wilo98 · Le 18/06/2008, à 23:15

Bin je viens de le retirer, (enfin, la maj du noyau l'a fait pour moi ;P ) et pas moins de 3 freeze dans la soirée... Grrrrrr

Je le remet, vu que les erreurs sont bien moins fréquentes avec...

Et vais passer le sujet en résolu (avec réserve). Il semble qu'il s'agisse d'un problème de gestion du SATA qui provoque ceci (Voir ce post).

On verra bien avec le temps...

Sinon, l'affichage du

root=UUID=411a521f-3780-452f-955b-22db07567c7c ro all_generic_ide quiet splash

est normal avant l'apparition de l'usplash?

inbox · Le 19/06/2008, à 00:08

Ça apparait à quel moment ?

Wilo98 · Le 19/06/2008, à 17:33

Lorsque grub a fini de faire ce qu'il a à faire, on voit un petit plaese wait en attendant que l'usplash s'affiche...

Et bien, ça apparaît juste en dessous de ce plaese wait... On le remarque à peine puisque juste après, l'usplash s'affiche tout comme il faut...

inbox · Le 19/06/2008, à 18:43

Je ne peut te confirmer ou infirmer la chose, mais ce n'est pas bien gênant.

Wilo98 · Le 29/06/2008, à 12:26

Bon...

Marre de rebooter ma machine toutes les 5 minutes... (j'exagère à peine ) Je décide d'installer la version 64 bits...

démarrage du cd live [ok]
Formatage du dd [ok]
Installation du système [ok]
redémarrage sur le système installé [ok]

et là, ça cafouille un peu... Je décide donc de passer le paramètre all_generic_ide et ça marche... Enfin, je croise les doigts, pour le moment, ça marche.

Je continue mon installation avec tout ce qui va bien... Et puis les problèmes d'incompatibilités avec l'architecture 64 bits ne sont plus que des vieux souvenirs... Pas de problème pour lire, encoder des vidéo. Firefox et le flash fonctionnent...

A part quelques plantages aléatoires, tout fonctionne... On verra bien dans le temps.

Encore merci pour ton aide Inbox...

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 14/06/2008, à 11:22

[RESOLU, à confirmé dans le temps]Système se fige apres l'install

#2 Le 14/06/2008, à 16:05

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#3 Le 14/06/2008, à 16:41

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#4 Le 14/06/2008, à 17:24

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#5 Le 14/06/2008, à 17:56

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#6 Le 14/06/2008, à 19:04

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#7 Le 15/06/2008, à 13:47

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#8 Le 16/06/2008, à 00:13

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#9 Le 16/06/2008, à 17:40

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#10 Le 16/06/2008, à 18:19

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#11 Le 16/06/2008, à 21:59

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#12 Le 16/06/2008, à 22:10

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#13 Le 16/06/2008, à 22:43

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#14 Le 16/06/2008, à 23:11

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#15 Le 17/06/2008, à 17:34

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#16 Le 17/06/2008, à 18:49

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#17 Le 18/06/2008, à 00:07

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#18 Le 18/06/2008, à 00:34

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#19 Le 18/06/2008, à 23:15

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#20 Le 19/06/2008, à 00:08

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#21 Le 19/06/2008, à 17:33

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#22 Le 19/06/2008, à 18:43

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

#23 Le 29/06/2008, à 12:26

Re : [RESOLU, à confirmé dans le temps]Système se fige apres l'install

Pied de page des forums