Ubuntu-fr

Stanmarseille

impossible de garder la resolution choisie

Après des heures de galère, j'arrive enfin à choisirt la resolution 1024*768 adaptée à mon ecran.
Mais dés que je reboote (ctrl alt backspace), la resolution revient en 800*600
J'essaie de modifier le xorg mais rien n'y fait.
Help et merci! Voici mon fichier:

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
	Option		"AddARGBGLXVisuals"	"True"
	Defaultdepth	24
	SubSection "Display"
		Depth	24
		Virtual	1024	768
		Modes		"1024x768@60"	"1280x960@60"	"1024x768@70"	"1024x768@75"	"832x624@75"	"800x600@60"	"800x600@75"	"800x600@72"	"800x600@56"	"640x480@75"	"640x480@72"	"640x480@60"
	EndSubSection
EndSection

Section "Device"
	Identifier	"Configured Video Device"
	Boardname	"NVIDIA GeForce FX (generic)"
	Busid		"PCI:1:0:0"
	Driver		"nvidia"
	Screen	0
	Vendorname	"NVIDIA"
EndSection

Section "Device"
	Identifier	"device1"
	Boardname	"NVIDIA GeForce FX (generic)"
	Busid		"PCI:1:0:0"
	Driver		"nvidia"
	Screen	1
	Vendorname	"NVIDIA"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc101"
	Option		"XkbLayout"	"fr"
	Option		"XkbVariant"	"oss"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
  screen 0 "Default Screen" 0 0
EndSection

Section "Module"
	Load		"glx"
	Load		"v4l"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
	Vendorname	"Generic CRT Display"
	Modelname	"Monitor 1024x768"
	Horizsync	31.5-61.0
	Vertrefresh	50-75
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
	Gamma	1.0
EndSection

Section "Extensions"
	Option		"Composite"	"Enable"
EndSection

Section "ServerFlags"
EndSection
Section "device" # 
	Identifier	"device2"
	Boardname	"NVIDIA GeForce FX (generic)"
	Busid		"PCI:1:0:0"
	Driver		"nvidia"
	Screen	1
	Vendorname	"NVIDIA"
EndSection
Section "screen" # 
	Identifier	"screen1"
	Device		"device2"
	Defaultdepth	24
	Monitor		"monitor1"
EndSection
Section "monitor" # 
	Identifier	"monitor1"
	Gamma	1.0
EndSection

Stanmarseille

Re : impossible de garder la resolution choisie

Finalement j'y suis arrivé tout seul:
Parametrage des ecrans 1 et 2 de la même manière dans le menu "ecrans et affichage" en 1024x768 et tout baigne même si je ne sais pas pourquoi.