#1 Le 07/03/2009, à 15:07
- barback
[mayday!]ouverture synaptic => plantage d'ubuntu!
Bonjour!
J'ai réinstallé ubuntu depuis environs 3/4 jours, tout allait bien jusqu'à ce que... j'ouvre synaptic (une fois de plus!) et la... ubuntu plante!! oO première fois que je vois linux planter en 2 ans d'utilisation, je redémarre mon ordinateur avec des bons petits souvenirs windosiens, et je me dit que ba... rien n'est parfait!
Je refais donc l'opération... replantage!! Oho!!! bizarre, vous avez dit bizarre?? Atendez, le mieux est à venir! Je redémarre mon ordinateur, et j'essaye de faire des mises a jours et au moment de cliquer sur mettre les mises à jours... plantage!!! oO
incroyable n'est-ce pas? Je n'ai pas essayé d'installer des paquets en mode console... devrais-je essayer, ou est-ce un "bug" graphique courant sous ubuntu??
J'ai installé pas mal de choses sous mon p'tit ubuntu pour le personnaliser... serais-ce la cause? Tout marchait à merveille quand tout à coup...
Autre chose bizarre, open office plante aussi! 
J'ai essayé d'installer loki juste avant cette série meurtrière de plantage à répétition, en écrivant ceci dans un joli petit terminal :
sudo apt-get install lokiil m'installe un tas de trucs....
Puis j'essaye de lancer loki comme ceci :
loki(ouai bon, je me foule pas trop! 
)
mais la console me revoie ceci! :
[loki.c:254] No parameter file specifiedFrustré, je vais voir du côté de synaptic pour faire des recherches avec "loki" et là... c'est la drame!
plantage
redémarrage
plantage
redémarrage
etc... je vous ai déjà conté mon histoire au début 
voila... tout ceci pour demander humblement de l'aide... ou même me demander des explications plus détaillées!
merci d'avance de votre sympathie et de votre compassion! 
Gabriel
ps : un petit détaille : le plantage s'effectue toujours juste après avoir donné mon mot de passe.
Autre fait bizarre : j'ai l'impression que les mises à jours s'effectuent ! J'ai laissé mon ordinateur qui avait planté suite à une tentative de mise à jours... je le redémarre, et firefox me dit qu'il a eu une mise à jour! je n'y comprend rien
Dernière modification par barback (Le 30/03/2009, à 15:44)
Hors ligne
#2 Le 07/03/2009, à 17:19
- barback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
erf
up pliiiiiiiiiiize!!
Hors ligne
#3 Le 07/03/2009, à 17:22
- #hehedotcom\'isback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
poste les retours de
dmesget de
sudo aptitude update && sudo aptitude safe-upgrade../
Hors ligne
#4 Le 07/03/2009, à 18:10
- barback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
oO heu... ma console ne conserve pas tout de
dmesg... voici le max que j'ai :
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.018565] ACPI: Core revision 20080609
[ 0.020218] ACPI: Checking initramfs for custom DSDT
[ 0.494864] ENABLING IO-APIC IRQs
[ 0.495047] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.534742] CPU0: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d
[ 0.536031] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3599.93 BogoMIPS (lpj=7199872)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 1024K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.620455] CPU1: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d
[ 0.620475] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.624052] Brought up 2 CPUs
[ 0.624055] Total of 2 processors activated (7199.83 BogoMIPS).
[ 0.624080] CPU0 attaching sched-domain:
[ 0.624084] domain 0: span 0-1 level MC
[ 0.624088] groups: 0 1
[ 0.624096] CPU1 attaching sched-domain:
[ 0.624099] domain 0: span 0-1 level MC
[ 0.624103] groups: 1 0
[ 0.624196] net_namespace: 840 bytes
[ 0.624196] Booting paravirtualized kernel on bare hardware
[ 0.624387] Time: 13:10:51 Date: 03/07/09
[ 0.624421] NET: Registered protocol family 16
[ 0.624446] EISA bus registered
[ 0.624446] ACPI: bus type pci registered
[ 0.624446] PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255
[ 0.624446] PCI: MCFG area at c0000000 reserved in E820
[ 0.624446] PCI: Using MMCONFIG for extended config space
[ 0.624446] PCI: Using configuration type 1 for base access
[ 0.628097] ACPI: EC: Look up EC in DSDT
[ 0.635753] ACPI: Interpreter enabled
[ 0.635765] ACPI: (supports S0 S3 S4 S5)
[ 0.635788] ACPI: Using IOAPIC for interrupt routing
[ 0.641325] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.641325] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.641325] pci 0000:00:01.0: PME# disabled
[ 0.641325] PCI: 0000:00:1b.0 reg 10 64bit mmio: [e5200000, e5203fff]
[ 0.641325] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.641325] pci 0000:00:1b.0: PME# disabled
[ 0.644084] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.644090] pci 0000:00:1c.0: PME# disabled
[ 0.644147] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.644153] pci 0000:00:1c.1: PME# disabled
[ 0.644200] PCI: 0000:00:1d.0 reg 20 io port: [e300, e31f]
[ 0.644256] PCI: 0000:00:1d.1 reg 20 io port: [e000, e01f]
[ 0.644311] PCI: 0000:00:1d.2 reg 20 io port: [e100, e11f]
[ 0.644367] PCI: 0000:00:1d.3 reg 20 io port: [e200, e21f]
[ 0.644419] PCI: 0000:00:1d.7 reg 10 32bit mmio: [e5204000, e52043ff]
[ 0.644600] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.644605] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.644633] PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
[ 0.644641] PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
[ 0.644649] PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
[ 0.644657] PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
[ 0.644665] PCI: 0000:00:1f.1 reg 20 io port: [f000, f00f]
[ 0.644711] PCI: 0000:00:1f.2 reg 10 io port: [e800, e807]
[ 0.644719] PCI: 0000:00:1f.2 reg 14 io port: [e900, e903]
[ 0.644727] PCI: 0000:00:1f.2 reg 18 io port: [ea00, ea07]
[ 0.644734] PCI: 0000:00:1f.2 reg 1c io port: [eb00, eb03]
[ 0.644742] PCI: 0000:00:1f.2 reg 20 io port: [ec00, ec0f]
[ 0.644768] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.644773] pci 0000:00:1f.2: PME# disabled
[ 0.644821] PCI: 0000:00:1f.3 reg 20 io port: [500, 51f]
[ 0.644881] PCI: 0000:01:00.0 reg 10 32bit mmio: [e2000000, e2ffffff]
[ 0.644894] PCI: 0000:01:00.0 reg 14 64bit mmio: [d0000000, dfffffff]
[ 0.644906] PCI: 0000:01:00.0 reg 1c 64bit mmio: [e0000000, e1ffffff]
[ 0.644914] PCI: 0000:01:00.0 reg 24 io port: [b000, b07f]
[ 0.644921] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.644979] PCI: bridge 0000:00:01.0 io port: [b000, bfff]
[ 0.644984] PCI: bridge 0000:00:01.0 32bit mmio: [e0000000, e3ffffff]
[ 0.644991] PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
[ 0.645040] PCI: bridge 0000:00:1c.0 io port: [a000, afff]
[ 0.645102] PCI: 0000:03:00.0 reg 10 io port: [c000, c0ff]
[ 0.645126] PCI: 0000:03:00.0 reg 18 64bit mmio: [e5010000, e5010fff]
[ 0.645143] PCI: 0000:03:00.0 reg 20 64bit mmio: [e5000000, e500ffff]
[ 0.645153] PCI: 0000:03:00.0 reg 30 32bit mmio: [0, ffff]
[ 0.645186] pci 0000:03:00.0: supports D1
[ 0.645189] pci 0000:03:00.0: supports D2
[ 0.645192] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.645198] pci 0000:03:00.0: PME# disabled
[ 0.645240] PCI: bridge 0000:00:1c.1 io port: [c000, cfff]
[ 0.645246] PCI: bridge 0000:00:1c.1 32bit mmio: [e4000000, e4ffffff]
[ 0.645253] PCI: bridge 0000:00:1c.1 64bit mmio pref: [e5000000, e50fffff]
[ 0.645295] PCI: 0000:04:01.0 reg 10 io port: [d000, d0ff]
[ 0.645304] PCI: 0000:04:01.0 reg 14 32bit mmio: [e5105000, e51050ff]
[ 0.645351] pci 0000:04:01.0: supports D1
[ 0.645353] pci 0000:04:01.0: supports D2
[ 0.645356] pci 0000:04:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.645362] pci 0000:04:01.0: PME# disabled
[ 0.645404] PCI: 0000:04:07.0 reg 10 32bit mmio: [e5104000, e51047ff]
[ 0.645413] PCI: 0000:04:07.0 reg 14 32bit mmio: [e5100000, e5103fff]
[ 0.645461] pci 0000:04:07.0: supports D1
[ 0.645463] pci 0000:04:07.0: supports D2
[ 0.645466] pci 0000:04:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.645472] pci 0000:04:07.0: PME# disabled
[ 0.645510] pci 0000:00:1e.0: transparent bridge
[ 0.645515] PCI: bridge 0000:00:1e.0 io port: [d000, dfff]
[ 0.645521] PCI: bridge 0000:00:1e.0 32bit mmio: [e5100000, e51fffff]
[ 0.645548] bus 00 -> node 0
[ 0.645556] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.645957] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.646114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.646275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.664186] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.664356] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.664524] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.664691] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.664857] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.665024] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.665191] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.665358] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.665442] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.665442] pnp: PnP ACPI init
[ 0.665442] ACPI: bus type pnp registered
[ 0.668888] pnp: PnP ACPI: found 14 devices
[ 0.668888] ACPI: ACPI bus type pnp unregistered
[ 0.668888] PnPBIOS: Disabled by ACPI PNP
[ 0.668888] PCI: Using ACPI for IRQ routing
[ 0.676046] NET: Registered protocol family 8
[ 0.676050] NET: Registered protocol family 20
[ 0.676076] NetLabel: Initializing
[ 0.676076] NetLabel: domain hash size = 128
[ 0.676076] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.676087] NetLabel: unlabeled traffic allowed by default
[ 0.676096] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.676104] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.678397] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.678401] actual entries 65620
[ 0.678509] AppArmor: AppArmor Filesystem Enabled
[ 0.678534] ACPI: RTC can wake from S4
[ 0.680043] Switched to high resolution mode on CPU 0
[ 0.680507] Switched to high resolution mode on CPU 1
[ 0.684061] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.684066] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.684071] system 00:01: ioport range 0x800-0x805 has been reserved
[ 0.684076] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.684081] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.684102] system 00:0a: ioport range 0x400-0x4bf could not be reserved
[ 0.684112] system 00:0b: iomem range 0xc0000000-0xcfffffff could not be reserved
[ 0.684123] system 00:0c: iomem range 0xcd000-0xcffff has been reserved
[ 0.684128] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.684133] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.684138] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.684143] system 00:0c: iomem range 0x7feb0000-0x7fefffff could not be reserved
[ 0.684148] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.684153] system 00:0c: iomem range 0x100000-0x7feaffff could not be reserved
[ 0.684158] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.684164] system 00:0c: iomem range 0xfed13000-0xfed1dfff could not be reserved
[ 0.684169] system 00:0c: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 0.684174] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.684179] system 00:0c: iomem range 0xffb00000-0xffb7ffff could not be reserved
[ 0.684190] system 00:0c: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.684194] system 00:0c: iomem range 0xe0000-0xeffff has been reserved
[ 0.719490] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.719495] pci 0000:00:01.0: IO window: 0xb000-0xbfff
[ 0.719501] pci 0000:00:01.0: MEM window: 0xe0000000-0xe3ffffff
[ 0.719506] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.719513] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.719518] pci 0000:00:1c.0: IO window: 0xa000-0xafff
[ 0.719524] pci 0000:00:1c.0: MEM window: disabled
[ 0.719529] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.719537] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.719541] pci 0000:00:1c.1: IO window: 0xc000-0xcfff
[ 0.719548] pci 0000:00:1c.1: MEM window: 0xe4000000-0xe4ffffff
[ 0.719553] pci 0000:00:1c.1: PREFETCH window: 0x000000e5000000-0x000000e50fffff
[ 0.719562] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.719566] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 0.719572] pci 0000:00:1e.0: MEM window: 0xe5100000-0xe51fffff
[ 0.719577] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.719595] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.719601] pci 0000:00:01.0: setting latency timer to 64
[ 0.719611] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.719617] pci 0000:00:1c.0: setting latency timer to 64
[ 0.719627] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.719633] pci 0000:00:1c.1: setting latency timer to 64
[ 0.719641] pci 0000:00:1e.0: setting latency timer to 64
[ 0.719646] bus: 00 index 0 io port: [0, ffff]
[ 0.719649] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.719652] bus: 01 index 0 io port: [b000, bfff]
[ 0.719656] bus: 01 index 1 mmio: [e0000000, e3ffffff]
[ 0.719659] bus: 01 index 2 mmio: [d0000000, dfffffff]
[ 0.719662] bus: 01 index 3 mmio: [0, 0]
[ 0.719665] bus: 02 index 0 io port: [a000, afff]
[ 0.719667] bus: 02 index 1 mmio: [0, 0]
[ 0.719670] bus: 02 index 2 mmio: [0, 0]
[ 0.719673] bus: 02 index 3 mmio: [0, 0]
[ 0.719676] bus: 03 index 0 io port: [c000, cfff]
[ 0.719679] bus: 03 index 1 mmio: [e4000000, e4ffffff]
[ 0.719682] bus: 03 index 2 mmio: [e5000000, e50fffff]
[ 0.719685] bus: 03 index 3 mmio: [0, 0]
[ 0.719688] bus: 04 index 0 io port: [d000, dfff]
[ 0.719691] bus: 04 index 1 mmio: [e5100000, e51fffff]
[ 0.719693] bus: 04 index 2 mmio: [0, 0]
[ 0.719696] bus: 04 index 3 io port: [0, ffff]
[ 0.719699] bus: 04 index 4 mmio: [0, ffffffff]
[ 0.719710] NET: Registered protocol family 2
[ 0.732106] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.732434] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.732929] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.733269] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.733274] TCP reno registered
[ 0.740169] NET: Registered protocol family 1
[ 0.740336] checking if image is initramfs... it is
[ 1.712166] Freeing initrd memory: 7994k freed
[ 1.713565] audit: initializing netlink socket (disabled)
[ 1.713592] type=2000 audit(1236431450.712:1): initialized
[ 1.721966] highmem bounce pool size: 64 pages
[ 1.721975] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.725128] VFS: Disk quotas dquot_6.5.1
[ 1.725250] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.725387] msgmni has been set to 1743
[ 1.725558] io scheduler noop registered
[ 1.725562] io scheduler anticipatory registered
[ 1.725566] io scheduler deadline registered
[ 1.725582] io scheduler cfq registered (default)
[ 1.725706] pci 0000:01:00.0: Boot video device
[ 1.725853] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.725900] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.725940] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.725996] pci_express 0000:00:01.0:pcie03: allocate port service
[ 1.726106] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.726146] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.726186] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.726242] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.726303] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.726416] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.726457] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.726496] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.726555] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 1.726607] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.727028] isapnp: Scanning for PnP cards...
[ 2.080121] isapnp: No Plug & Play device found
[ 2.124305] hpet_resources: 0xfed00000 is busy
[ 2.124411] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.124559] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.125514] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.127816] brd: module loaded
[ 2.127906] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 2.128155] PNP: No PS/2 controller found. Probing ports directly.
[ 2.128586] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.128593] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.136208] mice: PS/2 mouse device common for all mice
[ 2.136380] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.136405] rtc0: alarms up to one month, hpet irqs
[ 2.136583] EISA: Probing bus 0 at eisa.0
[ 2.136617] EISA: Detected 0 cards.
[ 2.136621] cpuidle: using governor ladder
[ 2.136625] cpuidle: using governor menu
[ 2.137341] TCP cubic registered
[ 2.137375] Using IPI No-Shortcut mode
[ 2.137640] registered taskstats version 1
[ 2.137800] Magic number: 1:500:179
[ 2.137837] tty ttyr5: hash matches
[ 2.137896] acpi device:0f: hash matches
[ 2.137932] rtc_cmos 00:04: setting system clock to 2009-03-07 13:10:52 UTC (1236431452)
[ 2.137937] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.137939] EDD information not available.
[ 2.138164] Freeing unused kernel memory: 424k freed
[ 2.138217] Write protecting the kernel text: 2580k
[ 2.138253] Write protecting the kernel read-only data: 940k
[ 2.353123] fuse init (API version 7.9)
[ 2.424254] processor ACPI0007:00: registered as cooling_device0
[ 2.424261] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.504512] processor ACPI0007:01: registered as cooling_device1
[ 2.504519] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.919076] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.919097] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.919116] r8169 0000:03:00.0: setting latency timer to 64
[ 2.919582] eth0: RTL8168c/8111c at 0xf8834000, 00:1d:7d:d2:e5:57, XID 3c2000c0 IRQ 220
[ 2.946856] usbcore: registered new interface driver usbfs
[ 2.946890] usbcore: registered new interface driver hub
[ 2.947176] usbcore: registered new device driver usb
[ 2.950135] No dock devices found.
[ 2.976253] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.976292] 8139cp 0000:04:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 2.976297] 8139cp 0000:04:01.0: Try the "8139too" driver instead.
[ 2.980593] 8139too Fast Ethernet driver 0.9.28
[ 2.980648] 8139too 0000:04:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.981499] eth1: RealTek RTL8139 at 0xd000, 00:14:d1:15:d1:84, IRQ 19
[ 2.981502] eth1: Identified 8139 chip type 'RTL-8100B/8139D'
[ 3.013453] SCSI subsystem initialized
[ 3.055554] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.055572] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.055577] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.055648] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.059557] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.059575] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe5204000
[ 3.063511] libata version 3.00 loaded.
[ 3.076021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.076202] usb usb1: configuration #1 chosen from 1 choice
[ 3.076241] hub 1-0:1.0: USB hub found
[ 3.076252] hub 1-0:1.0: 8 ports detected
[ 3.116115] USB Universal Host Controller Interface driver v3.0
[ 3.284370] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.284383] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.284389] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.284425] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.284458] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[ 3.284601] usb usb2: configuration #1 chosen from 1 choice
[ 3.284644] hub 2-0:1.0: USB hub found
[ 3.284655] hub 2-0:1.0: 2 ports detected
[ 3.392294] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.392307] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.392312] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.392349] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.392386] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
[ 3.392528] usb usb3: configuration #1 chosen from 1 choice
[ 3.392566] hub 3-0:1.0: USB hub found
[ 3.392576] hub 3-0:1.0: 2 ports detected
[ 3.400033] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 3.500285] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.500297] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.500302] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.500339] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.500376] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e100
[ 3.500512] usb usb4: configuration #1 chosen from 1 choice
[ 3.500559] hub 4-0:1.0: USB hub found
[ 3.500568] hub 4-0:1.0: 2 ports detected
[ 3.653112] usb 1-6: configuration #1 chosen from 1 choice
[ 3.708286] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 3.708299] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.708304] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.708339] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.708375] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e200
[ 3.708496] usb usb5: configuration #1 chosen from 1 choice
[ 3.708546] hub 5-0:1.0: USB hub found
[ 3.708554] hub 5-0:1.0: 2 ports detected
[ 3.916328] ohci1394 0000:04:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.966069] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[e5104000-e51047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.972580] ata_piix 0000:00:1f.1: version 2.12
[ 3.972598] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.972651] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.973490] scsi0 : ata_piix
[ 3.973625] scsi1 : ata_piix
[ 3.974587] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 3.974592] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 4.076031] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 4.200929] ata1.00: ATAPI: SAMSUNG CD-ROM SC-152G, C401, max MWDMA2
[ 4.200966] ata1.01: ATAPI: ASUS DRW-1814BL, 1.13, max UDMA/66
[ 4.256895] usb 5-1: configuration #1 chosen from 1 choice
[ 4.368277] usb 5-2: new low speed USB device using uhci_hcd and address 3
[ 4.541580] usb 5-2: configuration #1 chosen from 1 choice
[ 4.544702] usbcore: registered new interface driver hiddev
[ 4.559461] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input1
[ 4.560142] input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.3-1
[ 4.592531] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input2
[ 4.592873] input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1d.3-1
[ 4.606766] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input3
[ 4.612170] input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.3-2
[ 4.612205] usbcore: registered new interface driver usbhid
[ 4.612210] usbhid: v2.6:USB HID core driver
[ 5.236681] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00f333db00001d7d]
[ 6.120348] ata1.00: configured for MWDMA2
[ 6.136291] ata1.01: configured for UDMA/66
[ 6.303648] scsi 0:0:0:0: CD-ROM SAMSUNG CD-ROM SC-152G C401 PQ: 0 ANSI: 5
[ 6.304310] scsi 0:0:1:0: CD-ROM ASUS DRW-1814BL 1.13 PQ: 0 ANSI: 5
[ 6.304422] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.304428] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 6.304479] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 6.304812] scsi2 : ata_piix
[ 6.305141] scsi3 : ata_piix
[ 6.306107] ata3: SATA max UDMA/133 cmd 0xe800 ctl 0xe900 bmdma 0xec00 irq 19
[ 6.306112] ata4: SATA max UDMA/133 cmd 0xea00 ctl 0xeb00 bmdma 0xec08 irq 19
[ 6.476215] ata3.00: HPA unlocked: 976771055 -> 976773168, native 976773168
[ 6.476222] ata3.00: ATA-8: MAXTOR STM3500320AS, MX15, max UDMA/133
[ 6.476226] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 6.492614] ata3.00: configured for UDMA/133
[ 6.664197] ata4.00: HPA unlocked: 156299375 -> 156301488, native 156301488
[ 6.664203] ata4.00: ATA-6: WDC WD800JD-00HKA0, 13.03G13, max UDMA/133
[ 6.664207] ata4.00: 156301488 sectors, multi 16: LBA
[ 6.680369] ata4.00: configured for UDMA/133
[ 6.680521] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM350032 MX15 PQ: 0 ANSI: 5
[ 6.680740] scsi 3:0:0:0: Direct-Access ATA WDC WD800JD-00HK 13.0 PQ: 0 ANSI: 5
[ 6.699711] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 6.699924] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[ 6.699992] scsi 2:0:0:0: Attached scsi generic sg2 type 0
[ 6.700042] scsi 3:0:0:0: Attached scsi generic sg3 type 0
[ 6.725868] Driver 'sd' needs updating - please use bus_type methods
[ 6.727755] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 6.727779] sd 2:0:0:0: [sda] Write Protect is off
[ 6.727782] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.727819] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.727906] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 6.727926] sd 2:0:0:0: [sda] Write Protect is off
[ 6.727930] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.727965] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.727971] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 6.742174] sda1 sda2 <sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 6.745269] Uniform CD-ROM driver Revision: 3.20
[ 6.745409] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 6.748746] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.748874] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 6.763829] sda5 >
[ 6.764054] sd 2:0:0:0: [sda] Attached SCSI disk
[ 6.764155] sd 3:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 6.764179] sd 3:0:0:0: [sdb] Write Protect is off
[ 6.764182] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.764221] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.764302] sd 3:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 6.764325] sd 3:0:0:0: [sdb] Write Protect is off
[ 6.764328] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.764366] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.764371] sdb: sdb1 sdb2 < sdb5 sdb6 > sdb3
[ 6.797320] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 7.130276] PM: Starting manual resume from disk
[ 7.130282] PM: Resume from partition 8:5
[ 7.130284] PM: Checking hibernation image.
[ 7.130738] PM: Resume from disk failed.
[ 7.166962] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 7.166968] EXT3-fs: write access will be enabled during recovery.
[ 8.445612] kjournald starting. Commit interval 5 seconds
[ 8.445625] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 8.445635] ext3_orphan_cleanup: deleting unreferenced inode 13640482
[ 8.445682] EXT3-fs: sda1: 1 orphan inode deleted
[ 8.445686] EXT3-fs: recovery complete.
[ 8.584370] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.737479] udevd version 124 started
[ 15.101245] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.172742] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.276710] Linux agpgart interface v0.103
[ 15.304017] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 15.324076] ACPI: Power Button (FF) [PWRF]
[ 15.324181] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 15.352030] ACPI: Power Button (CM) [PWRB]
[ 15.735425] nvidia: module license 'NVIDIA' taints kernel.
[ 16.153611] parport_pc 00:09: reported by Plug and Play ACPI
[ 16.153664] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 16.188945] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.188954] nvidia 0000:01:00.0: setting latency timer to 64
[ 16.189121] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.82 Tue Nov 4 13:35:57 PST 2008
[ 16.221697] intel_rng: FWH not detected
[ 16.355835] iTCO_vendor_support: vendor-support=0
[ 16.416636] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 16.419617] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 16.419726] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.799986] Linux video capture interface: v2.00
[ 16.857651] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0306)
[ 16.858652] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input6
[ 16.884228] usbcore: registered new interface driver uvcvideo
[ 16.884234] USB Video Class driver (v0.1.0)
[ 16.900761] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.900787] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 16.934425] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
[ 17.023300] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 18.666110] lp0: using parport0 (interrupt-driven).
[ 18.812796] Adding 6064496k swap on /dev/sda5. Priority:-1 extents:1 across:6064496k
[ 19.369826] EXT3 FS on sda1, internal journal
[ 20.371309] type=1505 audit(1236431470.813:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4202
[ 20.605040] type=1505 audit(1236431471.049:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4207
[ 20.605269] type=1505 audit(1236431471.049:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4207
[ 20.750515] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.256610] ACPI: WMI: Mapper loaded
[ 22.265189] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 22.313938] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 22.313947] apm: disabled - APM is not SMP safe.
[ 22.464314] ppdev: user-space parallel port driver
[ 25.220047] Bluetooth: Core ver 2.13
[ 25.220593] NET: Registered protocol family 31
[ 25.220599] Bluetooth: HCI device and connection manager initialized
[ 25.220603] Bluetooth: HCI socket layer initialized
[ 25.247882] Bluetooth: L2CAP ver 2.11
[ 25.247889] Bluetooth: L2CAP socket layer initialized
[ 25.272122] Bluetooth: SCO (Voice Link) ver 0.6
[ 25.272129] Bluetooth: SCO socket layer initialized
[ 25.304664] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.304672] Bluetooth: BNEP filters: protocol multicast
[ 25.329650] Bluetooth: RFCOMM socket layer initialized
[ 25.329668] Bluetooth: RFCOMM TTY layer initialized
[ 25.329671] Bluetooth: RFCOMM ver 1.10
[ 25.356551] Bridge firewalling registered
[ 29.440458] eth1: link down
[ 29.442443] r8169: eth0: link up
[ 29.442455] r8169: eth0: link up
[ 29.796860] NET: Registered protocol family 17
[ 35.081314] NET: Registered protocol family 10
[ 35.082231] lo: Disabled Privacy Extensions
[ 35.083667] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 45.728508] eth0: no IPv6 routers present
[ 128.716128] ppdev0: registered pardevice
[ 128.764035] ppdev0: unregistered pardevice
[ 128.932428] ppdev0: registered pardevice
[ 128.980380] ppdev0: unregistered pardevice
[ 131.816417] ppdev0: registered pardevice
[ 131.864247] ppdev0: unregistered pardevice
[ 8948.804536] usb 1-4: new high speed USB device using ehci_hcd and address 5
[ 8948.940157] usb 1-4: configuration #1 chosen from 1 choice
[ 8949.145613] usbcore: registered new interface driver libusual
[ 8949.166434] Initializing USB Mass Storage driver...
[ 8949.166558] scsi4 : SCSI emulation for USB Mass Storage devices
[ 8949.167375] usb-storage: device found at 5
[ 8949.167382] usb-storage: waiting for device to settle before scanning
[ 8949.167784] usbcore: registered new interface driver usb-storage
[ 8949.167791] USB Mass Storage support registered.
[ 8954.164648] usb-storage: device scan complete
[ 8954.165391] scsi 4:0:0:0: Direct-Access SONY WALKMAN 1.00 PQ: 0 ANSI: 4
[ 8954.167370] sd 4:0:0:0: [sdc] 472960 2048-byte hardware sectors (969 MB)
[ 8954.170304] sd 4:0:0:0: [sdc] Write Protect is off
[ 8954.170314] sd 4:0:0:0: [sdc] Mode Sense: 3e 00 00 00
[ 8954.170319] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 8954.186547] sd 4:0:0:0: [sdc] 472960 2048-byte hardware sectors (969 MB)
[ 8954.190705] sd 4:0:0:0: [sdc] Write Protect is off
[ 8954.190714] sd 4:0:0:0: [sdc] Mode Sense: 3e 00 00 00
[ 8954.190717] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 8954.190729] sdc: sdc1
[ 8954.224725] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 8954.224880] sd 4:0:0:0: Attached scsi generic sg4 type 0
gabriel@gabriel-desktop:~$merci de m'aider et bon courage!
et pour
sudo aptitude update && sudo aptitude safe-upgrade ...voici :
gabriel@gabriel-desktop:~$ sudo aptitude update && sudo aptitude safe-upgrade
[sudo] password for gabriel:
Écriture de l'information d'état étendu... Fait
Atteint http://fr.archive.ubuntu.com intrepid Release.gpg
Prendre :1 http://fr.archive.ubuntu.com intrepid/main Translation-fr [398kB]
Atteint http://security.ubuntu.com intrepid-security Release.gpg
Ign http://security.ubuntu.com intrepid-security/main Translation-fr
Ign http://ppa.launchpad.net intrepid Release.gpg
Ign http://ppa.launchpad.net intrepid/main Translation-fr
Ign http://security.ubuntu.com intrepid-security/restricted Translation-fr
Ign http://security.ubuntu.com intrepid-security/universe Translation-fr
Ign http://security.ubuntu.com intrepid-security/multiverse Translation-fr
Atteint http://security.ubuntu.com intrepid-security Release
Prendre :2 http://ppa.launchpad.net intrepid Release.gpg [307B]
Ign http://ppa.launchpad.net intrepid/main Translation-fr
Prendre :3 http://ppa.launchpad.net intrepid Release [27,6kB]
Prendre :4 http://ppa.launchpad.net intrepid Release [46,7kB]
Ign http://ppa.launchpad.net intrepid Release
Atteint http://security.ubuntu.com intrepid-security/main Packages
Ign http://ppa.launchpad.net intrepid/main Packages
Atteint http://security.ubuntu.com intrepid-security/restricted Packages
Atteint http://security.ubuntu.com intrepid-security/main Sources
Atteint http://security.ubuntu.com intrepid-security/restricted Sources
Atteint http://security.ubuntu.com intrepid-security/universe Packages
Ign http://ppa.launchpad.net intrepid/main Packages
Atteint http://security.ubuntu.com intrepid-security/universe Sources
Atteint http://security.ubuntu.com intrepid-security/multiverse Packages
Atteint http://security.ubuntu.com intrepid-security/multiverse Sources
Atteint http://ppa.launchpad.net intrepid/main Packages
Atteint http://ppa.launchpad.net intrepid/main Packages
Prendre :5 http://fr.archive.ubuntu.com intrepid/restricted Translation-fr [4022B]
Prendre :6 http://fr.archive.ubuntu.com intrepid/universe Translation-fr [339kB]
Prendre :7 http://fr.archive.ubuntu.com intrepid/multiverse Translation-fr [63,0kB]
Atteint http://fr.archive.ubuntu.com intrepid-updates Release.gpg
Prendre :8 http://fr.archive.ubuntu.com intrepid-updates/main Translation-fr [406kB]
Prendre :9 http://fr.archive.ubuntu.com intrepid-updates/restricted Translation-fr [4026B]
Prendre :10 http://fr.archive.ubuntu.com intrepid-updates/universe Translation-fr [531kB]
Prendre :11 http://fr.archive.ubuntu.com intrepid-updates/multiverse Translation-fr [69,8kB]
Atteint http://fr.archive.ubuntu.com intrepid Release
Atteint http://fr.archive.ubuntu.com intrepid-updates Release
Atteint http://fr.archive.ubuntu.com intrepid/main Packages
Atteint http://fr.archive.ubuntu.com intrepid/restricted Packages
Atteint http://fr.archive.ubuntu.com intrepid/main Sources
Atteint http://fr.archive.ubuntu.com intrepid/restricted Sources
Atteint http://fr.archive.ubuntu.com intrepid/universe Packages
Atteint http://fr.archive.ubuntu.com intrepid/universe Sources
Atteint http://fr.archive.ubuntu.com intrepid/multiverse Packages
Atteint http://fr.archive.ubuntu.com intrepid/multiverse Sources
Atteint http://fr.archive.ubuntu.com intrepid-updates/main Packages
Atteint http://fr.archive.ubuntu.com intrepid-updates/restricted Packages
Atteint http://fr.archive.ubuntu.com intrepid-updates/main Sources
Atteint http://fr.archive.ubuntu.com intrepid-updates/restricted Sources
Atteint http://fr.archive.ubuntu.com intrepid-updates/universe Packages
Atteint http://fr.archive.ubuntu.com intrepid-updates/universe Sources
Atteint http://fr.archive.ubuntu.com intrepid-updates/multiverse Packages
Atteint http://fr.archive.ubuntu.com intrepid-updates/multiverse Sources
1815ko téléchargés en 3s (581ko/s)
Lecture des listes de paquets... Fait
W: GPG error: http://ppa.launchpad.net intrepid Release: Les signatures suivantes n'ont pas pu être vérifiées car la clé publique n'est pas disponible : NO_PUBKEY 2BA7BC59D745C5EB
W: Vous pouvez lancer « apt-get update » pour corriger ces problèmes.
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Lecture de l'information d'état étendu
Initialisation de l'état des paquets... Fait
Aucun paquet ne va être installé, mis à jour ou enlevé.
0 paquets mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de télécharger 0o d'archives. Après dépaquetage, 0o seront utilisés.
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Lecture de l'information d'état étendu
Initialisation de l'état des paquets... Fait
gabriel@gabriel-desktop:~$je lui obéis? je lance
apt-get update? MERCI encore de m'aider!!
Hors ligne
#5 Le 07/03/2009, à 18:13
- #hehedotcom\'isback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
Pas grand chose de significatif
Poste ton fichier sources.list
cat /etc/sources.list../
Hors ligne
#6 Le 07/03/2009, à 20:54
- barback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
gabriel@gabriel-desktop:~$ cat /etc/sources.list
cat: /etc/sources.list: Aucun fichier ou dossier de ce type
gabriel@gabriel-desktop:~$
voila.... désolé du retard, mais le site ne voualis pas me le poster! il atendait.. puis me metait "505 error"
Hors ligne
#7 Le 07/03/2009, à 20:58
- #hehedotcom\'isback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
désolé, c'est
cat /etc/apt/sources.listje me suis planté dans la commande dans le message précédent.
../
Hors ligne
#8 Le 07/03/2009, à 21:10
- barback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
ok ^^
en effet, il y a plus de résultat!
et merci de m'aider encore une fois!
gabriel@gabriel-desktop:~$ cat /etc/apt/sources.list
# deb cdrom:[Ubuntu 8.10 _Intrepid Ibex_ - Release i386 (20081029.5)]/ intrepid main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ intrepid main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ intrepid main restricted
## Major bug fix updates produced after the final release of the
## distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ intrepid-updates main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ intrepid-updates main restricted
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ intrepid universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ intrepid universe
deb http://fr.archive.ubuntu.com/ubuntu/ intrepid-updates universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ intrepid-updates universe
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://fr.archive.ubuntu.com/ubuntu/ intrepid multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ intrepid multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ intrepid-updates multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ intrepid-updates multiverse
## Uncomment the following two lines to add software from the 'backports'
## repository.
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
# deb http://fr.archive.ubuntu.com/ubuntu/ intrepid-backports main restricted universe multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu/ intrepid-backports main restricted universe multiverse
## Uncomment the following two lines to add software from Canonical's
## 'partner' repository. This software is not part of Ubuntu, but is
## offered by Canonical and the respective vendors as a service to Ubuntu
## users.
# deb http://archive.canonical.com/ubuntu intrepid partner
# deb-src http://archive.canonical.com/ubuntu intrepid partner
deb http://security.ubuntu.com/ubuntu intrepid-security main restricted
deb-src http://security.ubuntu.com/ubuntu intrepid-security main restricted
deb http://security.ubuntu.com/ubuntu intrepid-security universe
deb-src http://security.ubuntu.com/ubuntu intrepid-security universe
deb http://security.ubuntu.com/ubuntu intrepid-security multiverse
deb-src http://security.ubuntu.com/ubuntu intrepid-security multiverse
deb http://ppa.launchpad.net/compiz/ubuntu intrepid main
deb http://ppa.launchpad.net/m-buck/ubuntu intrepid main
gabriel@gabriel-desktop:~$
Hors ligne
#9 Le 07/03/2009, à 21:17
- barback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
oO
J'AI INSTALLÉ UN PAQUET SANS PLANTER!!
jer refais un essai... je ne comprend pas... est-ce ta commande? si c'est ça, merci et bravo!!!
Hors ligne
#10 Le 07/03/2009, à 21:18
- #hehedotcom\'isback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
On va le modifier pour voir
sudo gedit /etc/apt/sources.listet mets y tout cela (en remplacement de ce qui existe)
#########################################
### Depot Ubuntu#section: Ubuntu intrepid
deb http://be.archive.ubuntu.com/ubuntu/ intrepid main
deb http://be.archive.ubuntu.com/ubuntu/ intrepid restricted
deb http://be.archive.ubuntu.com/ubuntu/ intrepid universe
deb http://be.archive.ubuntu.com/ubuntu/ intrepid multiverse
deb-src http://be.archive.ubuntu.com/ubuntu intrepid-security main restricted universe multiverse#section: intrepid Updates
deb http://be.archive.ubuntu.com/ubuntu/ intrepid-updates main
deb http://be.archive.ubuntu.com/ubuntu/ intrepid-updates restricted
deb http://be.archive.ubuntu.com/ubuntu/ intrepid-updates universe
deb http://be.archive.ubuntu.com/ubuntu/ intrepid-updates multiverse
deb-src http://be.archive.ubuntu.com/ubuntu intrepid-updates main restricted universe multiverse#section: intrepid Security
deb http://be.archive.ubuntu.com/ubuntu/ intrepid-security main
deb http://be.archive.ubuntu.com/ubuntu/ intrepid-security restricted
deb http://be.archive.ubuntu.com/ubuntu/ intrepid-security universe
deb http://be.archive.ubuntu.com/ubuntu/ intrepid-security multiverse#section: intrepid Backports
deb http://be.archive.ubuntu.com/ubuntu/ intrepid-backports main
deb http://be.archive.ubuntu.com/ubuntu/ intrepid-backports restricted
deb http://be.archive.ubuntu.com/ubuntu/ intrepid-backports universe
deb http://be.archive.ubuntu.com/ubuntu/ intrepid-backports multiverse## section: intrepid PRE VERSION
deb http://be.archive.ubuntu.com/ubuntu intrepid-proposed main restricted universe multiverse
deb-src http://be.archive.ubuntu.com/ubuntu intrepid-proposed main restricted universe multiverse#########################################
###Depot Canonical
#section: Ubuntu intrepid
# DEPOTS COMMERCIAUX
deb http://archive.canonical.com/ubuntu intrepid partner
deb http://archive.canonical.com/ubuntu intrepid-security partner
deb http://archive.canonical.com/ubuntu intrepid-updates partner
deb-src http://archive.canonical.com/ubuntu intrepid partner
deb-src http://archive.canonical.com/ubuntu intrepid-security partner
deb-src http://archive.canonical.com/ubuntu intrepid-updates partner#########################################
###Depot Medibuntu
## wget -q http://fr.packages.medibuntu.org/medibuntu-key.gpg -O- | sudo apt-key add -
deb http://packages.medibuntu.org/ intrepid free non-free
# deb-src http://packages.medibuntu.org/ intrepid free non-free
#########################################
demander la clef medibuntu (codecs etc)
wget -q http://fr.packages.medibuntu.org/medibuntu-key.gpg -O- | sudo apt-key add -et mettre à jour
sudo aptitude update && sudo aptitude safe-upgradeJ'ai retiré le dépot compiz ppa (vu que tu ne sembles pas avoir de clefs GPG, j'en déduis qu'il ne t'est pas nécessaire)
../
Hors ligne
#11 Le 07/03/2009, à 21:21
- barback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
a non.. j'ai replanté! ^^ je lis ton message, et j'execute!
Hors ligne
#12 Le 07/03/2009, à 21:26
- barback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
Erf.. sacré mise à jour! ^^ à
wget -q http://fr.packages.medibuntu.org/medibuntu-key.gpg -O- | sudo apt-key add -il m'as répondu
OK(j'adore ubuntu... )
puis la..
sudo aptitude update && sudo aptitude safe-upgradeça télécharge! ^^ 58%...
Hors ligne
#13 Le 07/03/2009, à 21:29
- #hehedotcom\'isback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
Tu veux être pénard?
[Mise à jour de tout]
{à entrer dans un terminal, une ligne=une commande}.
sudo -s
aptitude update && aptitude safe-upgrade
aptitude full-upgrade
aptitude install build-essential linux-restricted-modules-$(uname -r)
aptitude install linux-headers-$(uname -r)
aptitude autoclean && update-pciids && update-usbids
reboot../
Hors ligne
#14 Le 07/03/2009, à 21:32
- barback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
Ai fini! je redémarre, comme il me l'as demandé!
Hors ligne
#15 Le 07/03/2009, à 21:33
- barback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
ho!
je redémarre, et je met tout a jours!
trop bien!! je garde ta commande sous le coude !
Hors ligne
#16 Le 07/03/2009, à 21:36
- michel2652
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
Bonjour,
barback a écrit :
trop bien!! je garde ta commande sous le coude !
Tu peux ajouter Résolu au titre du post, merci.
A+
#17 Le 07/03/2009, à 21:39
- #hehedotcom\'isback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
michel2652 a écrit :
Bonjour,
barback a écrit :trop bien!! je garde ta commande sous le coude !
Tu peux ajouter Résolu au titre du post, merci.
A+
Et me faire un virement paypal de 10 €, c'est pour me payer un maillot Ubuntu ^^ 
../
Hors ligne
#18 Le 07/03/2009, à 21:42
- #hehedotcom\'isback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
Arf, je n'aurai jamais le maillot qui va avec mon slip Ubuntu 
Vous êtes hard !!
../
Hors ligne
#19 Le 07/03/2009, à 22:24
- #hehedotcom\'isback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
hey Michel
Il est passé où ton message?
Encore une histoire à la X-files ce truc ^^
../
Hors ligne
#20 Le 07/03/2009, à 22:30
- barback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
hum... résolu... pas encore! sa plante toujours 
j'essaye de tout mettre à jour!
dsl pour le retard, mais je susi tombé sur mon frere qui regardais prison break... j'ai pas résisté!
c'est parti pour la grosse mise à jour!
Hors ligne
#21 Le 07/03/2009, à 22:43
- barback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
sa plante encooooooooooore! 
snif
c'est des qu'il veux mon mot de passe en mode graphique!! pas de problème en mode console...
Hors ligne
#22 Le 07/03/2009, à 22:46
- #hehedotcom\'isback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
Alors là, c'est un peu louche, car ton souci peut provenir de n'importe où...(pref de gnome, synaptic, gksu...)
Et je n'ai pas de solutions.
../
Hors ligne
#23 Le 08/03/2009, à 11:17
- barback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
Erf... j'ai installé un dock... est-ce ça? et sinon, je ne peux que réinstaller mon ubuntu? pour régler ce problème
Hors ligne
#24 Le 08/03/2009, à 17:11
- #hehedotcom\'isback
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
bonjour
C'est possible. désactive le pour vérifier.
../
Hors ligne
#25 Le 08/03/2009, à 19:41
- tux4fun
Re : [mayday!]ouverture synaptic => plantage d'ubuntu!
Sans rapport, à priori, mais pour éviter:
W: GPG error: http://ppa.launchpad.net intrepid Release: Les signatures suivantes n'ont pas pu être vérifiées car la clé publique n'est pas disponible : NO_PUBKEY 2BA7BC59D745C5EB
W: Vous pouvez lancer « apt-get update » pour corriger ces problèmes.
Le script launchpad solde ce pb:
http://doc.ubuntu-fr.org/depots#launchpad
D'accord, à priori sans rapport, mais bon...
Dernière modification par tux4fun (Le 09/03/2009, à 21:15)
tux4fun
http://linuxcounter.net/ - http://frederick.varin.free.fr
Linux Registered User #363458
Machine Registered #261921
Hors ligne