Ubuntu-fr

Kall

[WIFI]Carte wifi broadcom 4138

Salut

Je n'arrive pas du tout à installer le wifi sur mon portable acer 3022wlmi. En effet,  ma carte est reconnue par le système, elle est dans les connexions réseaux mais elle ne fonctionne pas. j'ai suivi les différents tutoriaux présents sur internet, avec ndiswrapper, j'ai fais tout ce qu'il fallait faire mais le module wifi ne marche toujours pas.

Voici une capture d'écran pour vous résumer le problème :

Merci de m'aider.
C'est ma première installation linux ...

A+

rapidos

Re : [WIFI]Carte wifi broadcom 4138

salut topin !

Ton problème est tout simple il te suffit de changer ASCII en HEXADECIMAL car en ascii ou en hexa tu n'obtient pas du tout la meme clé ce qui fait que ton routeur te rejette imédiatement

et pour achever ta configuration, dans la fenetre de configuration du réseau (celle qui se trouve au deuxième plan sur ta capture il faut que tu selectionne eth0 comme périphérique par défaut pour la passerelle

Et voila Enjoy
(tient nous au courant)

Ju

Kall

Re : [WIFI]Carte wifi broadcom 4138

Ok merci de ta réponse j'essaye ca tout de suite.

A+

Kall

Re : [WIFI]Carte wifi broadcom 4138

Je viens de faire ces manipulations est ca n'a rien changé. En effet, je n'ai toujours pas de wifi.
D'autre part, après avoir activé et validé la carte, dès que je reviens sur le gestionnaire des réseaux ma carte est toujours vue comme désactivée. Quand je fais un iwconfig, ma carte est détectée mais il y a marqué access point : invalid et le reste est mis sous off. On dirais que ma carte ne recherche aucun raison. D'ailleurs avec Kwifi elle est barrée en rouge.

Help !

A+

rapidos

Re : [WIFI]Carte wifi broadcom 4138

HMmmm,
Lorsque tu tapes dmesg dans la console la carte retourne-t-elle une erreur ? ou quelque chose qui t'indique qu'elle ne fonctionne pas ?

Et aussi pour l'ESSID, lorsque tu cliques sur la petite fleche a droite, y a-t-il une liste des réseaux disponibles qui apparait a coté ?

[to be continued]

Kall

Re : [WIFI]Carte wifi broadcom 4138

Voici ce que j'obtiens pour dmesg :

[4294667.296000] Linux version 2.6.15-18-386 (buildd@rothera) (gcc version 4.0.3 20060304 (prerelease) (Ubuntu 4.0.2-10ubuntu1)) #1 PREEMPT Thu Mar 9 14:41:49 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000]  BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
[4294667.296000]  BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
[4294667.296000]  BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[4294667.296000]  BIOS-e820: 0000000000100000 - 000000001fea0000 (usable)
[4294667.296000]  BIOS-e820: 000000001fea0000 - 000000001feae000 (ACPI data)
[4294667.296000]  BIOS-e820: 000000001feae000 - 000000001ff00000 (ACPI NVS)
[4294667.296000]  BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
[4294667.296000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[4294667.296000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[4294667.296000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 510MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000f6de0
[4294667.296000] On node 0 totalpages: 130720
[4294667.296000]   DMA zone: 4096 pages, LIFO batch:0
[4294667.296000]   DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000]   Normal zone: 126624 pages, LIFO batch:31
[4294667.296000]   HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6db0
[4294667.296000] ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x1fea81ce
[4294667.296000] ACPI: FADT (v001 ATI    Piranha  0x06040000 ATI  0x000f4240) @ 0x1feade41
[4294667.296000] ACPI: SSDT (v001 PTLTD  POWERNOW 0x06040000  LTP 0x00000001) @ 0x1feadeb5
[4294667.296000] ACPI: MADT (v001 PTLTD          APIC   0x06040000  LTP 0x00000000) @ 0x1feadf6a
[4294667.296000] ACPI: MCFG (v001 PTLTD    MCFG   0x06040000  LTP 0x00000000) @ 0x1feadfc4
[4294667.296000] ACPI: DSDT (v001    ATI    SB400 0x06040000 MSFT 0x0100000e) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x8008
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:12 APIC version 16
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda3 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 1600.924 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294669.576000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)[4294669.577000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294669.587000] Memory: 508200k/522880k available (1971k kernel code, 14120k reserved, 599k data, 288k init, 0k highmem)
[4294669.587000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294669.647000] Calibrating delay using timer specific routine.. 3203.59 BogoMIPS (lpj=1601798)
[4294669.647000] Security Framework v1.0.0 initialized
[4294669.647000] SELinux:  Disabled at boot.
[4294669.647000] Mount-cache hash table entries: 512
[4294669.647000] CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000000 00000000 00000001
[4294669.647000] CPU: After vendor identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000000 00000000 00000001
[4294669.647000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294669.647000] CPU: L2 Cache: 256K (64 bytes/line)
[4294669.647000] CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000010 00000000 00000000 00000001
[4294669.647000] mtrr: v2.0 (20020519)
[4294669.647000] CPU: AMD Mobile AMD Sempron(tm) Processor 2800+ stepping 00
[4294669.647000] Enabling fast FPU save and restore... done.
[4294669.647000] Enabling unmasked SIMD FPU exception support... done.
[4294669.647000] Checking 'hlt' instruction... OK.
[4294669.651000] checking if image is initramfs... it is
[4294670.236000] Freeing initrd memory: 6335k freed
[4294670.246000] ACPI: Looking for DSDT ... not found!
[4294670.251000] ENABLING IO-APIC IRQs
[4294670.251000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294670.271000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[4294670.272000] ...trying to set up timer (IRQ0) through the 8259A ...  failed.[4294670.272000] ...trying to set up timer as Virtual Wire IRQ... works.
[4294670.383000] NET: Registered protocol family 16
[4294670.383000] EISA bus registered
[4294670.383000] ACPI: bus type pci registered
[4294670.389000] PCI: PCI BIOS revision 2.10 entry at 0xfd63c, last bus=6
[4294670.389000] PCI: Using MMCONFIG
[4294670.390000] ACPI: Subsystem revision 20051216
[4294670.394000] ACPI: Interpreter enabled
[4294670.395000] ACPI: Using IOAPIC for interrupt routing
[4294670.395000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294670.395000] PCI: Probing PCI hardware (bus 00)
[4294670.401000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[4294670.402000] Boot video device is 0000:01:00.0
[4294670.403000] PCI: Transparent bridge - 0000:00:14.4
[4294670.403000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294670.407000] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[4294670.407000] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[4294670.407000] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[4294670.407000] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[4294670.408000] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[4294670.408000] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[4294670.408000] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[4294670.408000] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[4294670.409000] ACPI: Embedded Controller [EC0] (gpe 3) interrupt mode.
[4294670.446000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[4294670.447000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[4294670.447000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[4294670.447000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[4294670.448000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294670.448000] pnp: PnP ACPI init
[4294670.448000] pnp: PnPACPI: unknown resource type 7
[4294670.448000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294670.449000] pnp: PnPACPI: unknown resource type 7
[4294670.449000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0200
[4294670.449000] pnp: PnPACPI: unknown resource type 7
[4294670.449000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04
[4294670.449000] pnp: PnPACPI: unknown resource type 7
[4294670.449000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0b00
[4294670.449000] pnp: PnPACPI: unknown resource type 7
[4294670.449000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0800
[4294670.449000] pnp: PnPACPI: unknown resource type 7
[4294670.449000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0303
[4294670.449000] pnp: PnPACPI: unknown resource type 7
[4294670.449000] pnp: PnPACPI: METHOD_NAME__CRS failure for SYN0302
[4294670.449000] pnp: PnPACPI: unknown resource type 7
[4294670.449000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294670.449000] pnp: PnPACPI: unknown resource type 7
[4294670.449000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
[4294670.456000] pnp: PnPACPI: unknown resource type 7
[4294670.456000] pnp: PnPACPI: METHOD_NAME__CRS failure for NSC6001
[4294670.456000] pnp: PnP ACPI: found 0 devices
[4294670.456000] PnPBIOS: Disabled by ACPI PNP
[4294670.456000] PCI: Using ACPI for IRQ routing
[4294670.456000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[4294670.456000] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
[4294670.456000] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
[4294670.456000] PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0
[4294670.456000] PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0
[4294670.478000] PCI: Bridge: 0000:00:02.0
[4294670.478000]   IO window: 9000-9fff
[4294670.478000]   MEM window: c0100000-c01fffff
[4294670.478000]   PREFETCH window: c8000000-cfffffff
[4294670.478000] PCI: Bridge: 0000:00:06.0
[4294670.478000]   IO window: disabled.
[4294670.478000]   MEM window: disabled.
[4294670.478000]   PREFETCH window: disabled.
[4294670.478000] PCI: Bridge: 0000:00:07.0
[4294670.478000]   IO window: disabled.
[4294670.478000]   MEM window: disabled.
[4294670.478000]   PREFETCH window: disabled.
[4294670.478000] PCI: Bus 7, cardbus bridge: 0000:06:06.0
[4294670.478000]   IO window: 0000a400-0000a4ff
[4294670.478000]   IO window: 0000a800-0000a8ff
[4294670.478000]   PREFETCH window: 30000000-31ffffff
[4294670.478000]   MEM window: 34000000-35ffffff
[4294670.478000] PCI: Bridge: 0000:00:14.4
[4294670.478000]   IO window: a000-afff
[4294670.478000]   MEM window: c0200000-c02fffff
[4294670.478000]   PREFETCH window: 30000000-32ffffff
[4294670.479000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[4294670.479000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[4294670.479000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[4294670.479000] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 20 (level, low) -> IRQ 177
[4294670.479000] audit: initializing netlink socket (disabled)
[4294670.479000] audit(1142687345.478:1): initialized
[4294670.479000] VFS: Disk quotas dquot_6.5.1
[4294670.479000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294670.479000] Initializing Cryptographic API
[4294670.479000] io scheduler noop registered
[4294670.479000] io scheduler anticipatory registered
[4294670.479000] io scheduler deadline registered
[4294670.479000] io scheduler cfq registered
[4294670.906000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[4294670.906000] pcie_portdrv_probe->Dev[5a34:1002] has invalid IRQ. Check vendor BIOS
[4294670.906000] assign_interrupt_mode Found MSI capability
[4294670.906000] Allocate Port Service[pcie00]
[4294670.906000] Allocate Port Service[pcie01]
[4294670.906000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[4294670.906000] pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS
[4294670.906000] assign_interrupt_mode Found MSI capability
[4294670.906000] Allocate Port Service[pcie00]
[4294670.906000] Allocate Port Service[pcie01]
[4294670.906000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[4294670.906000] pcie_portdrv_probe->Dev[5a39:1002] has invalid IRQ. Check vendor BIOS
[4294670.906000] assign_interrupt_mode Found MSI capability
[4294670.906000] Allocate Port Service[pcie00]
[4294670.906000] Allocate Port Service[pcie01]
[4294670.906000] isapnp: Scanning for PnP cards...
[4294671.264000] isapnp: No Plug & Play device found
[4294671.277000] PNP: No PS/2 controller found. Probing ports directly.
[4294671.277000] i8042.c: Detected active multiplexing controller, rev 1.1.
[4294671.277000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[4294671.277000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[4294671.277000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[4294671.277000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[4294671.277000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294671.277000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[4294671.278000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294671.278000] ACPI: PCI Interrupt 0000:00:14.6[b] -> GSI 17 (level, low) -> IRQ 217
[4294671.278000] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[4294671.278000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294671.278000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294671.278000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294671.278000] ACPI: bus type ide registered
[4294671.278000] mice: PS/2 mouse device common for all mice
[4294671.279000] EISA: Probing bus 0 at eisa.0
[4294671.279000] Cannot allocate resource for EISA slot 1
[4294671.279000] Cannot allocate resource for EISA slot 8
[4294671.279000] EISA: Detected 0 cards.
[4294671.279000] NET: Registered protocol family 2
[4294671.289000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)[4294671.289000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[4294671.289000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[4294671.289000] TCP: Hash tables configured (established 16384 bind 16384)
[4294671.289000] TCP reno registered
[4294671.289000] TCP bic registered
[4294671.289000] NET: Registered protocol family 1
[4294671.289000] NET: Registered protocol family 8
[4294671.289000] NET: Registered protocol family 20
[4294671.289000] Using IPI Shortcut mode
[4294671.289000] ACPI wakeup devices:
[4294671.289000] LID0 SLPB OHC1 OHC2 EHCI  P2P MODM
[4294671.289000] ACPI: (supports S0 S3 S4 S5)
[4294671.289000] Freeing unused kernel memory: 288k freed
[4294671.355000] vga16fb: initializing
[4294671.355000] vga16fb: mapped to 0xc00a0000
[4294671.493000] Console: switching to colour frame buffer device 80x25
[4294671.493000] fb0: VGA16 VGA frame buffer device
[4294671.884000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294672.694000] Capability LSM initialized
[4294672.731000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[4294672.779000] ACPI: Thermal Zone [TZS0] (49 C)
[4294672.828000] ACPI: Thermal Zone [TZS1] (26 C)
[4294672.877000] ACPI: Thermal Zone [TZSV] (31 C)
[4294673.253000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[4294673.253000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 225
[4294673.253000] ATIIXP: chipset revision 0
[4294673.253000] ATIIXP: not 100% native mode: will probe irqs later
[4294673.253000]     ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
[4294673.253000]     ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
[4294673.253000] Probing IDE interface ide0...
[4294673.517000] hda: IC25N080ATMR04-0, ATA DISK drive
[4294674.129000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294674.129000] Probing IDE interface ide1...
[4294674.801000] hdc: Slimtype DVDRW SOSW-833S, ATAPI CD/DVD-ROM drive
[4294675.413000] ide1 at 0x170-0x177,0x376 on irq 15
[4294675.421000] hda: max request size: 1024KiB
[4294675.749000] hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
[4294675.750000] hda: cache flushes supported
[4294675.750000]  hda: hda1 hda2 hda3 hda4 < hda5 >
[4294675.848000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294675.848000] Uniform CD-ROM driver Revision: 3.20
[4294676.268000] usbcore: registered new driver usbfs
[4294676.269000] usbcore: registered new driver hub
[4294676.270000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[4294676.271000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 233
[4294676.271000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[4294676.272000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[4294676.272000] ohci_hcd 0000:00:13.0: irq 233, io mem 0xc0000000
[4294676.328000] hub 1-0:1.0: USB hub found
[4294676.328000] hub 1-0:1.0: 4 ports detected
[4294676.429000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 233
[4294676.429000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[4294676.429000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[4294676.429000] ohci_hcd 0000:00:13.1: irq 233, io mem 0xc0001000
[4294676.484000] hub 2-0:1.0: USB hub found
[4294676.484000] hub 2-0:1.0: 4 ports detected
[4294676.586000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 233
[4294676.586000] ehci_hcd 0000:00:13.2: EHCI Host Controller
[4294676.586000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[4294676.586000] ehci_hcd 0000:00:13.2: irq 233, io mem 0xc0002000
[4294676.586000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294676.586000] hub 3-0:1.0: USB hub found
[4294676.586000] hub 3-0:1.0: 8 ports detected
[4294677.021000] Attempting manual resume
[4294677.092000] EXT3-fs: mounted filesystem with ordered data mode.
[4294677.107000] kjournald starting.  Commit interval 5 seconds
[4294689.346000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294689.352000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294689.390000] Linux agpgart interface v0.101 (c) Dave Jones
[4294689.747000] ACPI: PCI Interrupt 0000:00:14.6[b] -> GSI 17 (level, low) -> IRQ 217
[4294689.750000] ACPI: PCI Interrupt 0000:00:14.5[b] -> GSI 17 (level, low) -> IRQ 217
[4294689.850000] MC'97 1 converters and GPIO not ready (0xff00)
[4294690.423000] ieee1394: Initialized config rom entry `ip1394'
[4294690.425000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[4294690.425000] ACPI: PCI Interrupt 0000:06:06.2[C] -> GSI 22 (level, low) -> IRQ 50
[4294690.459000] ieee80211_crypt: registered algorithm 'NULL'
[4294690.460000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[4294690.460000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[4294690.480000] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 20 (level, low) -> IRQ 177
[4294690.480000] Yenta: CardBus bridge found at 0000:06:06.0 [1025:0080]
[4294690.480000] Yenta: Using CSCINT to route CSC interrupts to PCI
[4294690.480000] Yenta: Routing CardBus interrupts to PCI
[4294690.480000] Yenta TI: socket 0000:06:06.0, mfunc 0x010a1b22, devctl 0x64
[4294690.486000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[50]  MMIO=[c0208000-c02087ff]  Max Packet=[2048]
[4294690.505000] bcm43xx driver
[4294690.505000] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 21 (level, low) -> IRQ 169
[4294690.703000] Yenta: ISA IRQ mask 0x0ef8, PCI irq 177
[4294690.703000] Socket status: 30000006
[4294690.703000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[4294690.703000] cs: IO port probe 0xa000-0xafff: clean.
[4294690.704000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
[4294690.704000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x32ffffff
[4294690.768000] r8169 Gigabit Ethernet driver 2.2LK loaded
[4294690.768000] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 23 (level, low) -> IRQ 58
[4294690.769000] eth1: Identified chip type is 'RTL8169s/8110s'.
[4294690.769000] eth1: RTL8169 at 0xe0a20400, 00:0a:e4:e0:88:b7, IRQ 58
[4294690.821000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[4294690.852000] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[4294690.854000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[4294690.867000] ts: Compaq touchscreen protocol output
[4294690.886000] sdhci: Secure Digital Host Controller Interface driver, 0.10
[4294690.886000] sdhci: Copyright(c) Pierre Ossman
[4294690.887000] ACPI: PCI Interrupt 0000:06:06.4[A] -> GSI 20 (level, low) -> IRQ 177
[4294691.012000] sdhci: ============== REGISTER DUMP ==============
[4294691.012000] sdhci: Sys addr: 0x00000000 | Version:  0x00008400
[4294691.012000] sdhci: Blk size: 0x00000000 | Blk cnt:  0x00000000
[4294691.012000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[4294691.012000] sdhci: Present:  0x00020000 | Host ctl: 0x00000000
[4294691.012000] sdhci: Power:    0x00000000 | Blk gap:  0x00000000
[4294691.012000] sdhci: Walk up:  0x00000000 | Clock:    0x00000002
[4294691.012000] sdhci: Timeout:  0x0000000e | Int stat: 0x00000000
[4294691.012000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf
[4294691.012000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[4294691.012000] sdhci: Caps:     0x01821090 | Max curr: 0x00000000
[4294691.012000] sdhci: ===========================================
[4294691.062000] mmc0: SDHCI at 0xc0209000 irq 177 DMA
[4294691.162000] sdhci: ============== REGISTER DUMP ==============
[4294691.162000] sdhci: Sys addr: 0x00000000 | Version:  0x00008400
[4294691.162000] sdhci: Blk size: 0x00000000 | Blk cnt:  0x00000000
[4294691.162000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[4294691.162000] sdhci: Present:  0x00020000 | Host ctl: 0x00000000
[4294691.162000] sdhci: Power:    0x00000000 | Blk gap:  0x00000000
[4294691.162000] sdhci: Walk up:  0x00000000 | Clock:    0x00000002
[4294691.162000] sdhci: Timeout:  0x0000000e | Int stat: 0x00000000
[4294691.162000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf
[4294691.162000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[4294691.162000] sdhci: Caps:     0x01821090 | Max curr: 0x00000000
[4294691.162000] sdhci: ===========================================
[4294691.212000] mmc1: SDHCI at 0xc0208c00 irq 177 DMA
[4294691.312000] sdhci: ============== REGISTER DUMP ==============
[4294691.312000] sdhci: Sys addr: 0x00000000 | Version:  0x00008400
[4294691.312000] sdhci: Blk size: 0x00000000 | Blk cnt:  0x00000000
[4294691.312000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[4294691.312000] sdhci: Present:  0x000a0000 | Host ctl: 0x00000000
[4294691.312000] sdhci: Power:    0x00000000 | Blk gap:  0x00000000
[4294691.312000] sdhci: Walk up:  0x00000000 | Clock:    0x00000002
[4294691.312000] sdhci: Timeout:  0x0000000e | Int stat: 0x00000000
[4294691.312000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf
[4294691.312000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[4294691.312000] sdhci: Caps:     0x01821898 | Max curr: 0x00000000
[4294691.312000] sdhci: ===========================================
[4294691.362000] mmc2: SDHCI at 0xc0208800 irq 177 DMA
[4294691.474000] cs: IO port probe 0x100-0x3af: clean.
[4294691.476000] cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x4d0-0x4d7
[4294691.477000] cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f
[4294691.478000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[4294691.479000] cs: IO port probe 0xa00-0xaff: clean.
[4294691.844000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[1234567812345678][4294691.896000] lp: driver loaded but no devices found
[4294691.954000] SCSI subsystem initialized
[4294691.957000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[4294691.957000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)[4294691.957000] ieee1394: sbp2: Try serialize_io=0 for better performance
[4294692.034000] Adding 1510068k swap on /dev/hda5.  Priority:-1 extents:1 across:1510068k
[4294692.279000] EXT3 FS on hda3, internal journal
[4294692.440000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294692.440000] md: bitmap version 4.39
[4294693.200000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294696.867000] ACPI: AC Adapter [ADP1] (off-line)
[4294697.051000] ACPI: Battery Slot [BAT0] (battery present)
[4294697.123000] ACPI: Power Button (FF) [PWRF]
[4294697.123000] ACPI: Lid Switch [LID0]
[4294697.123000] ACPI: Sleep Button (CM) [SLPB]
[4294697.220000] ibm_acpi: ec object not found
[4294697.323000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[4294697.323000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[4294697.830000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
[4294697.830000] powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x8 (1350 mV)
[4294697.830000] powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x13 (1075 mV)
[4294697.830000] cpu_init done, current fid 0x8, vid 0x8
[4294702.799000] [drm] Initialized drm 1.0.0 20040925
[4294702.814000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 66
[4294702.815000] [drm] Initialized radeon 1.19.0 20050911 on minor 0:
[4294702.934000] [drm] Loading R300 Microcode
[4294704.280000] apm: BIOS not found.
[4294709.969000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294709.969000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294709.969000] ide: failed opcode was: 0xec
[4294709.982000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294709.982000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294709.982000] ide: failed opcode was: 0xec
[4294710.323000] Bluetooth: Core ver 2.8
[4294710.323000] NET: Registered protocol family 31
[4294710.323000] Bluetooth: HCI device and connection manager initialized
[4294710.323000] Bluetooth: HCI socket layer initialized
[4294710.338000] Bluetooth: L2CAP ver 2.8
[4294710.338000] Bluetooth: L2CAP socket layer initialized
[4294710.347000] Bluetooth: RFCOMM socket layer initialized
[4294710.347000] Bluetooth: RFCOMM TTY layer initialized
[4294710.347000] Bluetooth: RFCOMM ver 1.7
[4294716.767000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294716.767000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294716.767000] ide: failed opcode was: 0xef
[4294785.132000] psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.
[4294785.990000] NET: Registered protocol family 10
[4294785.990000] lo: Disabled Privacy Extensions
[4294785.990000] IPv6 over IPv4 tunneling driver
[4294796.954000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4294797.262000] ISO 9660 Extensions: RRIP_1991A
[4294840.594000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[4294843.367000] APIC error on CPU0: 00(40)
[4294900.468000] ieee80211_crypt: registered algorithm 'WEP'
[4294900.695000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[4294900.708000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[4294901.787000] NET: Registered protocol family 17
[4294955.264000] APIC error on CPU0: 40(40)
[4294973.530000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[4294973.543000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[4295096.822000] APIC error on CPU0: 40(40)
[4295109.650000] r8169: eth1: link up
[4295120.540000] eth1: no IPv6 routers present

Au sujet de la flèche a coté de ESSID, elle ne met aucun réseaux. En fait c'est moi qui ait tapé les caractéristique du réseau (wep, nom).

Help !

A+

Baptiste

Re : [WIFI]Carte wifi broadcom 4138

Essaye ça, ça devrait fonctionner : j'utilise les même pilotes.

https://wiki.ubuntu.com/WifiDocs/Driver … dcomDriver

Dernière modification par Baptiste (Le 18/03/2006, à 14:39)

vogia

Re : [WIFI]Carte wifi broadcom 4138

salut,

j'ai le meme processeur : BCM4318.
je l'ai installé par ndiswrapper, en me servant des pilotes windows.
pour pouvoir avoir le lien avec ton infrastructure, tu dois renseigner
le ESSID
l'Access point
le channel
la key
au moyen de iwconfig (voit le man de iwconfig avant) pour accrocher ton infrastructure.
tu dois aussi renseigner ces éléments dans /etc/network/interfaces
si tu as chargé ton pilote via ndiswrapper, tu dois inscrire ndiswrapper dans /etc/modules

tu scan les réseaux par iwlist (man iwlist)
tu surveilles les évenements par iwevent

garfunk

Re : [WIFI]Carte wifi broadcom 4138

Lol...avec les Acer, il faut autre chose pour activer le wifi : acer_acpi. Ce logiciel permet d'activer la carte au niveau matériel, sinon elle ne sera jamais active.
Je te conseille de suivre ce lien, tu y trouvera toutes les infos nécessaires sur l'installation de acer_acpi (que mumbly le fasse sur un système 64 bits ne change absolument rien pour acer_acpi )

---

Plus ça va, moins je comprends