Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 14/03/2006, à 17:55

lpf

installer driver ATI 8.23.7 [Breezy]

Je viens de flinguer une deuxieme carte Nvidia à cause d'une surtension sur la sortie TVout donc je ressors une ATI 8500 LE oubliée depuis Hoary et l'impossibilité d'activer la sortie TVout dans Xorg.

Pas facile de trouver le tuto pour installer les drivers ATI 8.23.7... pas mal d'infos pas toujours à jour dans pleins de posts... or donc en m'inspirant du formidable tuto de Mr VALERE que je remercie et qui se trouve ici :
http://forum.ubuntu-fr.org/viewtopic.php?id=25166

je me lance dans l'installation des 8.23.7

Méthode suivie et qui marche à chaque fois chez moi :

Déinstallez les drivers ATI inclus dans Breezy :

Code:

sudo apt-get remove xorg-driver-fglrx
sudo apt-get remove fglrx-control
sudo apt-get remove linux-restricted-modules-$(uname -r)

- Rebootez
- Téléchargez les drivers : https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.23.7-i386.run

Vous pourriez obtenir quelques erreurs concernant des dépendances pendant le processus de dpkg.  Vous pouvez les ignorer puisqu'elles devraient être résolues quand vous lancerez l'étape de mise à niveau.

Code:

sudo apt-get install gcc-3.4 module-assistant build-essential fakeroot dh-make debconf

(là il faut jouer du "ls" et du "cd" dans un terminal pour aller dans le dossier où se trouve votre fichier ati-driver-installer-8.23.7-i386.run avant de lancer le code qui suit)

Code:

sudo sh ./ati-driver-installer-8.23.7-i386.run --buildpkg Ubuntu/breezy
cd /tmp
sudo dpkg -i fglrx-control_8.23.7-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.23.7-1_i386.deb
sudo dpkg -i xorg-driver-fglrx_8.23.7-1_i386.deb
sudo apt-get -f upgrade

Code:

sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant a-i fglrx

Code:

sudo aticonfig --initial

- Rebootez

Bon, voilà pour l'étape 1.

Maintenant reste à voir si la sortie TVout va fonctionner... suite au prochain épisode.

Hors ligne

#2 Le 14/03/2006, à 18:28

K'sperd

Re : installer driver ATI 8.23.7 [Breezy]

Si tu pouvait mettre la suite, car ma sortie TV fonctionne mais pas totalement.......elle est en N&B et je n'arive pas à la remettre en PAL (si c'est le problème) et l'image est trop grande.
J'ai installé "fglx ontrol", mais les réglages ne sont pas pris en compte.....


Je suis impatient de la faire fonctionner.


K'sperd

Hors ligne

#3 Le 15/03/2006, à 08:54

lpf

Re : installer driver ATI 8.23.7 [Breezy]

K'sperd a écrit :

elle est en N&B et je n'arive pas à la remettre en PAL

premier essai avec le driver ATI 8.23.7 :

image en N&B sur la TV.
et image en 60 HZ sur le moniteur.

Pour revenir à du 85 HZ sur le moniteur je dois virer le cable dans la prise TVout.

J'ai regardé mon Xorg :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "aticonfig Screen 0" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "Files"

        # paths to defoma fonts
    FontPath     "/usr/share/X11/fonts/misc"
    FontPath     "/usr/share/X11/fonts/cyrillic"
    FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath     "/usr/share/X11/fonts/Type1"
    FontPath     "/usr/share/X11/fonts/CID"
    FontPath     "/usr/share/X11/fonts/100dpi"
    FontPath     "/usr/share/X11/fonts/75dpi"
    FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
    Load  "GLcore"
    Load  "bitmap"
    Load  "ddc"
    Load  "dri"
    Load  "extmod"
    Load  "freetype"
    Load  "glx"
    Load  "int10"
    Load  "type1"
    Load  "vbe"
EndSection

Section "InputDevice"
    Identifier  "Generic Keyboard"
    Driver      "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules" "xorg"
    Option        "XkbModel" "pc105"
    Option        "XkbLayout" "fr"
    Option        "XkbVariant" "latin9"
EndSection

Section "InputDevice"
    Identifier  "Configured Mouse"
    Driver      "mouse"
    Option        "CorePointer"
    Option        "Device" "/dev/input/mice"
    Option        "Protocol" "ImPS/2"
    Option        "Emulate3Buttons" "true"
    Option        "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier   "PHILIPS 107E"
    HorizSync    30.0 - 100.0
    VertRefresh  50.0 - 160.0
    Option        "DPMS"
EndSection

Section "Monitor"
    Identifier   "aticonfig Monitor 0"
EndSection

Section "Device"
    Identifier  "ATI Technologies, Inc. Radeon 8500 (R200 QL)"
    Driver      "ati"
    BusID       "PCI:1:0:0"
EndSection

Section "Device"
    Identifier  "ATI Graphics Adapter 0"
    Driver      "fglrx"
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "Default Screen"
    Device     "ATI Technologies, Inc. Radeon 8500 (R200 QL)"
    Monitor    "PHILIPS 107E"
    DefaultDepth     24
    SubSection "Display"
        Depth     1
        Modes    "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     4
        Modes    "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     8
        Modes    "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     15
        Modes    "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     16
        Modes    "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     24
        Modes    "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier "aticonfig Screen 0"
    Device     "ATI Graphics Adapter 0"
    Monitor    "aticonfig Monitor 0"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "DRI"
    Mode         0666
EndSection

et dans le fichier module je ne charge pas fglrx...

as usual ça sent encore la grosse galère pour trouver une solution...

rappel ma carte : carte Hercules 3D Prophet 8500 LE

Peux tu préciser les références de ta carte et poster ton Xorg ?

Hors ligne

#4 Le 15/03/2006, à 10:31

jphi_le_même

Re : installer driver ATI 8.23.7 [Breezy]

Salut plf & merci pour ce tuto!!!

Toutefois j'ai un petit problème:

nom@ubuntu:/tmp$ sudo aticonfig --initial
Using /etc/X11/xorg.conf
Uninitialised file found, configuring.

Une idée? hmm

#5 Le 15/03/2006, à 10:34

lpf

Re : installer driver ATI 8.23.7 [Breezy]

jphi_le_même a écrit :

Salut plf & merci pour ce tuto!!!

Toutefois j'ai un petit problème:

nom@ubuntu:/tmp$ sudo aticonfig --initial
Using /etc/X11/xorg.conf
Uninitialised file found, configuring.

Une idée? hmm

je crois que j'ai eu le meme message...
configuring pour moi veut dire qu'il le configure... ensuite rebooter... that's all

Hors ligne

#6 Le 15/03/2006, à 10:52

jphi_le_même

Re : installer driver ATI 8.23.7 [Breezy]

Un grand MERCI plf!!!!! smile

Ca marche! big_smile

Info utile: ton tuto fonctionne pour Dapper Flight 5!!
               Nécessite un reboot complet du systeme et pas seulement du serveur X

Ma config: Dapper Flight 5 + ATI 9600 + Driver 8.23.7

Have fun!!

#7 Le 15/03/2006, à 10:53

jphi_le_même

Re : installer driver ATI 8.23.7 [Breezy]

lpf, toute mes excuses pour l'écorchage !!!

#8 Le 15/03/2006, à 11:20

lpf

Re : installer driver ATI 8.23.7 [Breezy]

jphi_le_même a écrit :

ATI 9600

T'en vas pas smile

comme tu as une ATI 9600, pourrais tu poster ton xorg ?
As tu une sortie TV qui fonctionne ?
Thanks

Hors ligne

#9 Le 15/03/2006, à 11:24

lpf

Re : installer driver ATI 8.23.7 [Breezy]

jphi_le_même a écrit :

Ma config: Dapper Flight 5

euh juste une question... Dapper Flight 5 c'est plus mieux wink que la 5.10 ?... juste histoire de saliver en attendant la 6.04 (ou 6.06...) finale ...

Hors ligne

#10 Le 15/03/2006, à 16:20

jphi_le_même

Re : installer driver ATI 8.23.7 [Breezy]

Ma foi c'est force sympathique, assez stable pour ce que j'en ai vu ( ca fait que deux jour!! )....
Mais, si tu veux installer xgl, ca na pa l'air encore ou point pour toutes les config ATI.

AH si! Un bug, qui semble n'exister que chez moi:
Réveil à 3h15!!! le moulin s'allume tout seul! Incroyable mais vrai!:cool:

Have Fun!

#11 Le 15/03/2006, à 16:37

jphi_le_même

Re : installer driver ATI 8.23.7 [Breezy]

Désolé pour l'attente, réinstall oblige!! tongue

Voici le xorg.conf de mon ATI 9600:

EndSection

Section "InputDevice"
    Identifier  "Generic Keyboard"
    Driver      "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules" "xorg"
    Option        "XkbModel" "pc105"
    Option        "XkbLayout" "fr"
    Option        "XkbVariant" "latin9"
EndSection

Section "InputDevice"
    Identifier  "Configured Mouse"
    Driver      "mouse"
    Option        "CorePointer"
    Option        "Device" "/dev/input/mice"
    Option        "Protocol" "ExplorerPS/2"
    Option        "Emulate3Buttons" "true"
EndSection

Section "Monitor"
    Identifier   "SyncMaster"
    Option        "DPMS"
EndSection

Section "Monitor"
    Identifier   "aticonfig Monitor 0"
EndSection

Section "Device"
    Identifier  "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
    Driver      "ati"
    BusID       "PCI:1:0:0"
EndSection

Section "Device"
    Identifier  "ATI Graphics Adapter 0"
    Driver      "fglrx"
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "Default Screen"
    Device     "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
    Monitor    "SyncMaster"
    DefaultDepth     24
    SubSection "Display"
        Depth     1
        Modes    "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     4
        Modes    "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     8
        Modes    "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     15
        Modes    "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     16
        Modes    "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     24
        Modes    "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier "aticonfig Screen 0"
    Device     "ATI Graphics Adapter 0"
    Monitor    "aticonfig Monitor 0"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "DRI"
    Mode         0666
EndSection

Pour la sortie TV je ne vais pas pouvoir t'aider car je n'en ai pas.

Bon courage!

#12 Le 15/03/2006, à 16:48

jphi_le_même

Re : installer driver ATI 8.23.7 [Breezy]

Alors voici la marche a suivre pour installer ces drivers sur Dapper (tester sur Flight 5):
En gras, les modification apporter Breezy -> Dapper

Déinstallez les drivers ATI inclus dans Dapper (inutile pour une install toute fraiche):

Code:

sudo apt-get remove xorg-driver-fglrx
sudo apt-get remove fglrx-control
sudo apt-get remove linux-restricted-modules-$(uname -r)

- Rebootez le PC
- Téléchargez les drivers : https://a248.e.akamai.net/f/674/9206/0/ … 7-i386.run


Code:

sudo apt-get install gcc-3.4 module-assistant build-essential fakeroot dh-make debconf libstdc++5

(là il faut jouer du "ls" et du "cd" dans un terminal pour aller dans le dossier où se trouve votre fichier ati-driver-installer-8.23.7-i386.run avant de lancer le code qui suit)

Code:

sudo sh ./ati-driver-installer-8.23.7-i386.run --buildpkg Ubuntu/dapper
cd /tmp
sudo dpkg -i xorg-driver-fglrx_8.23.7-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.23.7-1_i386.deb
sudo dpkg -i fglrx-control_8.23.7-1_i386.deb
sudo apt-get -f upgrade

sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant a-i fglrx

Code:

sudo aticonfig –initial

Vous devriez optenir un message comme celui ci:

Using /etc/X11/xorg.conf
Uninitialised file found, configuring.

- Rebootez le PC

big_smile:D:D

#13 Le 15/03/2006, à 17:13

lpf

Re : installer driver ATI 8.23.7 [Breezy]

Merci pour le Xorg et pour les précisions sur Dapper smile

Hors ligne

#14 Le 16/03/2006, à 18:06

K'sperd

Re : installer driver ATI 8.23.7 [Breezy]

Voici mon xorg.conf et ma carte est une 9700.
Désolé pour le retard, mais j'ai essayé plusieurs fois et je n'arrivais pas à poster à la suite

Pour moi, je n'ai pas les derniers drivers, mais le problème de la sortie TV est le même


# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
    FontPath    "/usr/share/X11/fonts/misc"
    FontPath    "/usr/share/X11/fonts/cyrillic"
    FontPath    "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath    "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath    "/usr/share/X11/fonts/Type1"
    FontPath    "/usr/share/X11/fonts/CID"
    FontPath    "/usr/share/X11/fonts/100dpi"
    FontPath    "/usr/share/X11/fonts/75dpi"
        # paths to defoma fonts
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
    Load    "GLcore"
    Load    "bitmap"
    Load    "ddc"
    Load    "dri"
    Load    "extmod"
    Load    "freetype"
    Load    "glx"
    Load    "int10"
    Load    "type1"
    Load    "vbe"
EndSection

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc105"
    Option        "XkbLayout"    "be"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
    Option        "Device"        "/dev/input/mice"
    Option        "Protocol"        "ImPS/2"
    Option        "Emulate3Buttons"    "true"
    Option        "ZAxisMapping"        "4 5"
EndSection

Section "InputDevice"
    Identifier    "Synaptics Touchpad"
    Driver        "synaptics"
    Option        "SendCoreEvents"    "true"
    Option        "Device"        "/dev/psaux"
    Option        "Protocol"        "auto-dev"
    Option        "HorizScrollDelta"    "0"
EndSection

Section "Device"
    Identifier    "ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)"
    Driver        "ati"
    BusID        "PCI:1:0:0"
EndSection

Section "Monitor"
    Identifier    "Acer screen"
    Option        "DPMS"
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Device        "ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)"
    Monitor        "Acer screen"
    DefaultDepth    24
    SubSection "Display"
        Depth        1
        Modes        "1280x1024"
    EndSubSection
    SubSection "Display"
        Depth        4
        Modes        "1280x1024"
    EndSubSection
    SubSection "Display"
        Depth        8
        Modes        "1280x1024"
    EndSubSection
    SubSection "Display"
        Depth        15
        Modes        "1280x1024"
    EndSubSection
    SubSection "Display"
        Depth        16
        Modes        "1280x1024"
    EndSubSection
    SubSection "Display"
        Depth        24
        Modes        "1280x1024"
    EndSubSection
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
    Screen        "Default Screen"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "Synaptics Touchpad"
EndSection

Section "DRI"
    Mode    0666
EndSection

Hors ligne

#15 Le 16/03/2006, à 19:38

Gyscos

Re : installer driver ATI 8.23.7 [Breezy]

Euh... j'ai dapper drake, mais quand, après avoir fait le sh ./ati-... --buildpkg Ubuntu/dapper, j'essaye d'installer les .deb du dossier temp, j'ai un message comme ça :

root@pc-alex:/tmp# dpkg -i xorg-driver-fglrx_8.23.7-1_i386.deb
dpkg : concernant xorg-driver-fglrx_8.23.7-1_i386.deb contenant xorg-driver-fglrx :
 xorg-driver-fglrx entre en conflit avec nvidia-glx
  nvidia-glx (version 1.0.8178+2.6.15.7-1) est installé.
dpkg : erreur de traitement de xorg-driver-fglrx_8.23.7-1_i386.deb (--install) :
 paquets en conflit - xorg-driver-fglrx non installé
Des erreurs ont été rencontrées pendant l'exécution :
 xorg-driver-fglrx_8.23.7-1_i386.deb

Pourquoi ?...


Stranger passing in the street, by chance two separate glances meet.
And I am you and what I see is me...

Hors ligne

#16 Le 16/03/2006, à 20:53

lpf

Re : installer driver ATI 8.23.7 [Breezy]

K'sperd a écrit :

Pour moi, je n'ai pas les derniers drivers, mais le problème de la sortie TV est le même

Tu as quoi comme drivers ?

as tu essayé la manip suivante ? :

branchement de la TV puis tu lances ton PC et tu regardes ce qui se passe sur la TV...

de manière surprenante je remarque que le logo de ma carte mere (DFI) qui apparait en couleur sur mon ecran PC au demarrage est en N&B sur la TV...

je me demande si je n'ai pas un probleme de cablage sur la prise S-VHS de la sortie TV de la carte ATI... car normalement au demarrage il n'y a aucun driver d'utilisé... donc l'image sur la TV devrait etre en couleur...

Hors ligne

#17 Le 17/03/2006, à 09:02

K'sperd

Re : installer driver ATI 8.23.7 [Breezy]

J'ai le même problème, tout ce qui s'affiche sur la TV est en N&B.......
J'ai essayé de le remettre en PAL par l'intermédiaire de fglx-controll, mais ca marche pas.



K'sperd dépité

Hors ligne

#18 Le 17/03/2006, à 18:54

Gyscos

Re : installer driver ATI 8.23.7 [Breezy]

Faut que je désinstalle nvidia-glx ?
En fait j'hésite parcque j'ai un peu peur de tout bousiller...


Stranger passing in the street, by chance two separate glances meet.
And I am you and what I see is me...

Hors ligne

#19 Le 17/03/2006, à 20:09

ShaLouZa

Re : installer driver ATI 8.23.7 [Breezy]

J'ai Dapper sur une partoche de test, et je viens d'y mettre les pilotes ATI grâce à ce tuto. big_smile

J'ai une sortie TV fonctionnelle avec une Radeon 9700, en ayant repris le xorg.conf de la Breezy (portable avec sortie S-Vidéo). Voilà mon xorg.conf pour ceux que ça peut intéresser :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
#   cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
#   sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
#   sudo dpkg-reconfigure xserver-xorg

Section "Files"
    FontPath    "unix/:7100"            # local font server
    # if the local font server has problems, we can fall back on these
    FontPath    "/usr/lib/X11/fonts/misc"
    FontPath    "/usr/lib/X11/fonts/cyrillic"
    FontPath    "/usr/lib/X11/fonts/100dpi/:unscaled"
    FontPath    "/usr/lib/X11/fonts/75dpi/:unscaled"
    FontPath    "/usr/lib/X11/fonts/Type1"
    FontPath    "/usr/lib/X11/fonts/CID"
    FontPath    "/usr/lib/X11/fonts/100dpi"
    FontPath    "/usr/lib/X11/fonts/75dpi"
        # paths to defoma fonts
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
    Load    "bitmap"
    Load    "dbe"
    Load    "ddc"
    Load    "dri"
#     Load    "extmod"
        SubSection "extmod"
        Option    "omit xfree86-dga"
        EndSubSection
    Load    "freetype"
    Load    "glx"
    Load    "int10"
    Load    "record"
    Load    "type1"
    Load    "vbe"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "keyboard"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"     "fr"
	Option		"XkbVariant"	"latin9"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
	Option        	"Buttons"        	"7"
EndSection

Section "InputDevice"
        Identifier      "Synaptics Touchpad"
        Driver          "synaptics"
        Option          "SendCoreEvents"        "true"
        Option          "Device"                "/dev/psaux"
        Option          "Protocol"              "auto-dev"
        Option		"HorizScrollDelta"    "0"
	Option		"SHMConfig"
EndSection

Section "Device"
    Identifier    "ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)"
    Driver        "fglrx"
    BusID        "PCI:1:0:0"
    Option        "NoTV" "no"
# === disable/enable XAA/DRI ===
    Option        "no_accel" "no"
    Option        "no_dri" "no"
# === OpenGL specific profiles/settings ===
        Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option        "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
        Option "Stereo"                     "off"
        Option "StereoSyncEnable"           "1"
# === FSAA Management ===
        Option "FSAAEnable"                 "no"
        Option "FSAAScale"                  "1"
        Option "FSAADisableGamma"           "no"
        Option "FSAACustomizeMSPos"         "no"
        Option "FSAAMSPosX0"                "0.000000"
        Option "FSAAMSPosY0"                "0.000000"
        Option "FSAAMSPosX1"                "0.000000"
        Option "FSAAMSPosY1"                "0.000000"
        Option "FSAAMSPosX2"                "0.000000"
        Option "FSAAMSPosY2"                "0.000000"
        Option "FSAAMSPosX3"                "0.000000"
        Option "FSAAMSPosY3"                "0.000000"
        Option "FSAAMSPosX4"                "0.000000"
        Option "FSAAMSPosY4"                "0.000000"
        Option "FSAAMSPosX5"                "0.000000"
        Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
        Option "UseFastTLS"                 "0"
        Option "BlockSignalsOnLock"         "on"
        Option "UseInternalAGPGART"         "no"
        Option "ForceGenericCPU"            "no"
        Option "mtrr"                       "off"
#
    screen 0
EndSection

Section "Device"
    Identifier    "ATI_tvout"
    Driver        "fglrx"
    Option        "VideoOverlay" "on"
    BusID        "PCI:1:0:0"
    Option        "NoTV" "no"
    screen 1
Option "DesktopSetup" "0x00000000"
    # === disable/enable XAA/DRI ===
        Option "no_accel"                   "no"
        Option "no_dri"                     "no"
    # === TV-out Management ===
        Option "NoTV"                       "no"     
    #Option "CursorShadow" "1"
    Option "TVStandard"                 "PAL-D"
    Option "ConnectedMonitor" "TV"
    Option "TVOutFormat" "Composite"
    Option "TVHSizeAdj"                 "-10"     
        Option "TVVSizeAdj"                 "20"     
        Option "TVHPosAdj"                  "15"     
        Option "TVVPosAdj"                  "0"
    #Option "VideoOverlay" "on"     
        Option "TVHStartAdj"                "0"     
    Option "TVColorAdj"                 "0"     
        Option "GammaCorrectionI"           "0x06419064"
        Option "GammaCorrectionII"          "0x06419064"
    # === OpenGL specific profiles/settings ===
        Option "Capabilities"               "0x00000000"
    # === Video Overlay for the Xv extension ===
        Option "VideoOverlay"               "on"
    # === OpenGL Overlay ===
    # Note: When OpenGL Overlay is enabled, Video Overlay
    #       will be disabled automatically
        Option "OpenGLOverlay"              "off"
    # === Center Mode (Laptops only) ===
        Option "CenterMode"                 "off"
    # === Pseudo Color Visuals (8-bit visuals) ===
        Option "PseudoColorVisuals"         "off"
    # === QBS Management ===
        Option "Stereo"                     "off"
        Option "StereoSyncEnable"           "1"
    # === FSAA Management ===
        Option "FSAAEnable"                 "no"
        Option "FSAAScale"                  "1"
        Option "FSAADisableGamma"           "no"
        Option "FSAACustomizeMSPos"         "no"
        Option "FSAAMSPosX0"                "0.000000"
        Option "FSAAMSPosY0"                "0.000000"
        Option "FSAAMSPosX1"                "0.000000"
        Option "FSAAMSPosY1"                "0.000000"
        Option "FSAAMSPosX2"                "0.000000"
        Option "FSAAMSPosY2"                "0.000000"
        Option "FSAAMSPosX3"                "0.000000"
        Option "FSAAMSPosY3"                "0.000000"
        Option "FSAAMSPosX4"                "0.000000"
        Option "FSAAMSPosY4"                "0.000000"
        Option "FSAAMSPosX5"                "0.000000"
        Option "FSAAMSPosY5"                "0.000000"
    # === Misc Options ===
        Option "UseFastTLS"                 "0"
        Option "BlockSignalsOnLock"         "on"
        Option "UseInternalAGPGART"         "no"
        Option "ForceGenericCPU"            "no"
        Option "mtrr"                       "off"
EndSection

Section "Monitor"
	Identifier	"Écran générique"
	HorizSync   60
	VertRefresh 60
	Option		"DPMS"
	DisplaySize    444    277    # 1680x1050 96dpi
EndSection

Section "Monitor"
    Identifier "MaTv"
    HorizSync 30.0-50.0
    VertRefresh 50.0-60.0
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)"
	Monitor		"Écran générique"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1680x1050"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1680x1050"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1680x1050"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1680x1050"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1680x1050"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1680x1050"
	EndSubSection
EndSection

Section "Screen"
    Identifier "ecran_TV"
    Device "ATI_tvout"
    Monitor "MaTv"
    DefaultColorDepth 24
    Subsection "Display"
        Modes "800x600" "Interlace"
        Depth 24
    EndSubsection
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
    Screen        "Default Screen"
    Screen        "ecran_TV" LeftOf "Default Screen"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "Synaptics Touchpad"
EndSection

Section "DRI"
    Mode    0666
EndSection

N'oubliez pas de changer les résolutions et autres input device s'ils ne correspondent pas aux vôtres. Si vous cassez votre système ou grillez votre moniteur en copiant ce xorg.conf, je décline toute responsabilité. wink


«D'abord ils vous ignorent, puis ils rient de vous, puis ils vous combattent, puis vous gagnez.» Gandhi

Hors ligne

#20 Le 17/03/2006, à 22:57

Fox

Re : installer driver ATI 8.23.7 [Breezy]

Salut je vien d installer les pilote ati comme au dessus mais j ai toujours pas l acceleration 3d .
Qu es qui faut faire de plus pour que ca marche ?
Merci .

#21 Le 18/03/2006, à 15:10

Gyscos

Re : installer driver ATI 8.23.7 [Breezy]

Aucune réponse ??


Stranger passing in the street, by chance two separate glances meet.
And I am you and what I see is me...

Hors ligne

#22 Le 18/03/2006, à 15:39

Gyscos

Re : installer driver ATI 8.23.7 [Breezy]

Bon, j'ai viré nvidia-glx et maintenant, au moment de faire

sudo module-assistant a-i fglrx

à la fin, ca me dit qu'il peut pas (et j'ai le choix entre continuer / arreter / voir) et si je fais aticonfig -initial, j'ai en réponse :

root@pc-alex:/tmp# aticonfig -initial
Warning: Could not find configuration file
Please copy configuration file template to /etc/X11


Stranger passing in the street, by chance two separate glances meet.
And I am you and what I see is me...

Hors ligne

#23 Le 18/03/2006, à 15:55

Gyscos

Re : installer driver ATI 8.23.7 [Breezy]

Ok j'ai rien dit, j'avais fait -initial et pas --initial.
Ca marche à peu près, mais j'ai l'impression que c'est pas 3D accéléré : les jeux 3D fonctionnent mais rament à fond sad


Stranger passing in the street, by chance two separate glances meet.
And I am you and what I see is me...

Hors ligne

#24 Le 18/03/2006, à 17:53

lpf

Re : installer driver ATI 8.23.7 [Breezy]

K'sperd a écrit :

J'ai le même problème, tout ce qui s'affiche sur la TV est en N&B.......

Va falloir attendre une semaine avant que je puisse tester une 9200se avec sortie TV et un autre câble...
je posterai le résultat à ce moment là.

Hors ligne

#25 Le 18/03/2006, à 17:57

lpf

Re : installer driver ATI 8.23.7 [Breezy]

Gyscos a écrit :

Ok j'ai rien dit, j'avais fait -initial et pas --initial.
Ca marche à peu près, mais j'ai l'impression que c'est pas 3D accéléré : les jeux 3D fonctionnent mais rament à fond sad

es tu sûr que le driver est installé ?
faire dans un terminal :
fglrxinfo

et ça doit te donner :

OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 8500 DDR Generic
OpenGL version string: 1.3.1050 (X4.3.0-8.23.7)

ensuite allez voir là pour les résultats en 3D et comparer :
http://forum.ubuntu-fr.org/viewtopic.php?id=2487&p=14

Hors ligne