Ubuntu-fr

womby

ATI mobility X700- Dapper Drake

Alors voila, j'ai parcouru le forum plusieurs fois avant de me resigner a poster un thread.

Mon soucis: je n'ai pas de 3D activée... enfin la est tout le probleme
Tout mes screensavers exploitant GL fonctionne tres bien "meme gears et planetary gears)

Seulement un petit glxgears et voila que j'ai des performances lamentables... je me dis.. c'est glxgears qui foire. alors voila que j'installe chromium qui est un jeu exploitant l'opengl et la aussi... c'est affreusement injouable.
Donc le fait que les screensavers fonctionne, je suppose que c'est a mettre sur le dos des librairies MESA...
glxinfo me donne un sympa

womby@ubuntu-acer:~$ glxinfo | grep direct
direct rendering: No                                          #paradoxale vu le log de xorg :/
OpenGL renderer string: Mesa GLX Indirect

Bref je vous fait part des differents logs et autre configuration:

je verifie que le module fglrx est bien chargé:

womby@ubuntu-acer:~$ lsmod | grep fglrx
fglrx                 465864  7
agpgart                36784  2 fglrx,intel_agp

Bien, le module est donc bien chargé et de plus semble fonctionnelle... soit un petit dmesg pour voir ce qu'en dit le noyau...

womby@ubuntu-acer:~$ dmesg | grep fglrx
[4294687.022000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies , Starnberg, GERMANY' taints kernel.
[4294687.024000] [fglrx] Maximum main memory to use for locked dma buffers: 926 MBytes.
[4294687.024000] [fglrx] module loaded - fglrx 8.23.7 [Mar  6 2006] on minor 0
[4294765.475000] [fglrx] free  PCIe = 51118080
[4294765.475000] [fglrx] max   PCIe = 51118080
[4294765.476000] [fglrx] free  LFB = 122613760
[4294765.476000] [fglrx] max   LFB = 122613760
[4294765.476000] [fglrx] free  Inv = 0
[4294765.476000] [fglrx] max   Inv = 0
[4294765.476000] [fglrx] total Inv = 0
[4294765.476000] [fglrx] total TIM = 0
[4294765.476000] [fglrx] total FB  = 0
[4294765.476000] [fglrx] total PCIe = 16384
[4296629.823000] [fglrx] free  PCIe = 51118080
[4296629.823000] [fglrx] max   PCIe = 51118080
[4296629.823000] [fglrx] free  LFB = 122613760
[4296629.823000] [fglrx] max   LFB = 122613760
[4296629.823000] [fglrx] free  Inv = 0
[4296629.824000] [fglrx] max   Inv = 0
[4296629.824000] [fglrx] total Inv = 0
[4296629.824000] [fglrx] total TIM = 0
[4296629.824000] [fglrx] total FB  = 0
[4296629.824000] [fglrx] total PCIe = 16384

Jusque là tout me semble parfait. Op direction le serveur x et ses logs
je verifie tout ce qui à un rapport avec fglrx...

womby@ubuntu-acer:~$ cat /var/log/Xorg.0.log | grep fglrx
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
(II) fglrx(0): pEnt->device->identifier=0x81d9748
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "MOBILITY RADEON X700 (M26 5653)" (Chipset = 0x5653)
(--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0066)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xc8100000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.10
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2003, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M26-P
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR1
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Connected Display1: LCD on internal LVDS
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: QDS  Model: 41  Serial#: 0
(II) fglrx(0): Year: 2005  Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 33  vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.575 redY: 0.359   greenX: 0.319 greenY: 0.532
(II) fglrx(0): blueX: 0.155 blueY: 0.129   whiteX: 0.312 whiteY: 0.328
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 68.9 MHz   Image Size:  331 x 207 mm
(II) fglrx(0): h_active: 1280  h_sync: 1301  h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) fglrx(0): v_active: 800  v_sync: 804  v_sync_end 808 v_blanking: 816 v_border: 0
(II) fglrx(0):  QUANTADISPLAY
(II) fglrx(0):  QD15TL072
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Specified desktop setup not supported: 8
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000004
(II) fglrx(0): POWERplay version 3.  3 power states available:
(II) fglrx(0):   1. 358/344MHz @ 60Hz [enable load balancing]
(II) fglrx(0):   2. 105/120MHz @ 60Hz [low voltage, enable sleep]
(II) fglrx(0):   3. 209/182MHz @ 60Hz [low voltage, enable sleep]
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 8 modes found for primary display.
(--) fglrx(0): Virtual size is 1024x768 (pitch 1024)
(**) fglrx(0): *Mode "1024x768": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   68.90  1024 1045 1077 1408  768 804 808 816
(**) fglrx(0): *Mode "800x600": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   68.90  800 821 853 1408  600 804 808 816
(**) fglrx(0): *Mode "640x480": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   68.90  640 661 693 1408  480 804 808 816
(**) fglrx(0):  Default mode "640x400": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   68.90  640 661 693 1408  400 804 808 816
(**) fglrx(0):  Default mode "512x384": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   68.90  512 533 565 1408  384 804 808 816
(**) fglrx(0):  Default mode "400x300": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"   68.90  400 421 453 1408  300 804 808 816
(**) fglrx(0):  Default mode "320x240": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"   68.90  320 341 373 1408  240 804 808 816
(**) fglrx(0):  Default mode "320x200": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"   68.90  320 341 373 1408  200 804 808 816
(--) fglrx(0): Display dimensions: (330, 210) mm
(--) fglrx(0): DPI set to (78, 92)
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): cpuSpeedMHz: 0x000007cb
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) fglrx(0): UMM Bus area:     0xd0501000 (size=0x07aef000)
(II) fglrx(0): UMM area:     0xd0501000 (size=0x07aef000)
(II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 99.8
(II) fglrx(0): detected X.org 7.0.0.0
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xf8d0e000
(II) fglrx(0): [drm] mapped SAREA 0xf8d0e000 to 0xb76d4000
(II) fglrx(0): [drm] framebuffer handle = 0xd0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.23.7
(II) fglrx(0):     Date: Mar  6 2006
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.15-19-686
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0xc8100000
(II) fglrx(0): [pcie] 65536 kB allocated with handle 0xdeadbeef
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(II) fglrx(0): [drm] texture shared area handle = 0xf9365000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x00501000
(II) fglrx(0): FBMM initialized for area (0,0)-(1024,1281)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor (scanline 768)
(II) fglrx(0): Largest offscreen area available: 1024 x 505
(**) fglrx(0): DPMS enabled
(WW) fglrx(0): Option "AllowGLXWithComposite" is not used
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(II) fglrx(0): Interrupt handler installed at IRQ 169.

De nouveau rien de critique, j'ai meme droit a une direct rendering enabled!...

Soite donc je verifie pour les warning...

womby@ubuntu-acer:~$ cat /var/log/Xorg.0.log | grep '(WW)'
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(WW) fglrx(0): Specified desktop setup not supported: 8

la encore rien de bien serieux...
Maintenant voila ou ca se gâte....

womby@ubuntu-acer:~$ cat /var/log/Xorg.0.log | grep '(EE)'
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(EE) Failed to load /usr/lib/xorg/modules/extensions/libGLcore.so
(EE) Failed to load module "GLcore" (loader failed, 7)

Sur ce point là j'ai tout essayer... meme de recuperer le libGLcore.so du live cd de kororaa qui lui fonctionne a merveille...evidemment (loi des vexations universelle)

alors evidemment j'ai deja retirer la ligne incriminé: Load "GLcore"
mais bon evidemment je n'ai plus d'erreur mais ca ne marche guere mieux 

Donc voila, celui qui arrive à me tirer d'affaire je promet sur l'atomium de lui envoyé une boite de chocolat belge (j'espere qu'il y a des fans de chocolat ... )
A moins que vous vouliez des frites... mais je vous garanti pas l'etat à l'arrivée!

Merci d'avance en tout cas !

EDIT: Je precise que sous Breezy j'avais bien la 3D fonctionnelle (avec le driver proprietaire).
Mais l'envie de passer sous dapper a fond, j'aimerais arriver a tout faire fonctionner sous dapper...

Dernière modification par womby (Le 21/03/2006, à 15:45)