Problème d'effacement de DVD-RW par Brasero

Caocoa · Le 15/12/2009, à 16:46

Salut !
J'ai gravé des données sur un DVD-RW neuf que j'aimerai maintenant effacer.. J'ai utilisé l'outil du menu contextuel (de Brasero je présume) en désactiavant "effacement rapide" et là, bam !
Quand j'insère mon disque en théorie vierge, il n'est pas monté, je ne êux pas le voir ni graver de nouveau dessus.
Comment faire pour faire en sorte que je puisse de nouveau utiliser ce disque ?

Dernière modification par Caocoa (Le 24/12/2009, à 20:45)

Caocoa · Le 16/12/2009, à 11:10

Up

Caocoa · Le 16/12/2009, à 15:58

Personne ne peut m'aider ?

lynn · Le 16/12/2009, à 19:25

Salut,

En général, un dvd rw ne s'efface pas. Tu réécris simplement dessus en écrasant les données précédentes ou à la suite dans le cas d'un multi-session.

Essaie avec un autre logiciel comme k3b par exemple, disponible dans les dépots.

cinaptix · Le 16/12/2009, à 19:39

Effacement radical d'un CDRW ou DVD+RW

1.Cas du CDRW
Il arrive qu'à la suite d'une gravure « foirée », Ubuntu ne veuille plus « monter » un CDRW.
Pour effacer radicalement ce disque, taper en console : cdrecord blank=all

2.Cas des DVD réinscriptibles
• DVD+RW
Taper en console : dvd+rw-format -force $dev
L’option -force- n’est nécessaire que pour un média déjà utilisé et n’est pas nécessaire pour un média neuf.
• DVD-RW
Pour un DVD-RW si le média n’est pas neuf utiliser -force=full

Options un peu plus « puissantes » :

dvd+rw-format -force=full -blank=full /dev/sr0

où vous remplacerez /dev/sr0 par le périphérique correspondant à votre graveur.

Caocoa · Le 17/12/2009, à 14:09

Merci beaucoup pour ces précisons ; je testerai le plus rapidement possible.

Caocoa · Le 17/12/2009, à 22:08

Cela peut avoir l'air bête mais je n'arrive pas à trouver l'adresse /dev/... de mon graveur : comment faire ?

Hoper · Le 17/12/2009, à 22:40

Tu dois pouvoir le trouver dans les messages de boot (commande dmesg).
Sinon regarde si il n'y a pas un /dev/cdrom ou un truc dans le genre, qui pointerai sur le bon device...

AlexandreP · Le 17/12/2009, à 23:06

Effectivement, l'information pourrait se trouver dans le fichier de journal /var/log/dmesg, mais quand on ne sait pas exactement quoi chercher et où chercher, c'est un peu galère. (À mon avis. )

Il existe un petit outil en ligne de commande, hwinfo, qui liste l'ensemble du matériel de l'ordinateur. Très très pratique. Et dans le cas présent, il permet d'obtenir des informations très rapidement concernant un type de périphériques en particulier (les lecteurs de CD-ROM).
D'abord, il faut l'installer ; le paquet est hwinfo :

administrateur@machine:~$ sudo apt-get install hwinfo

Puis, il suffit d'exécuter la commande suivante :

administrateur@machine:~$ sudo hwinfo --cdrom

Voici un exemple de retour, dans une machine virtuelle :

14: SCSI 100.0: 10602 CD-ROM (DVD)                              
  [Created at block.247]
  UDI: /org/freedesktop/Hal/devices/storage_model_CD_ROM
  Unique ID: KD9E.bdbWQaKnov0
  Parent ID: mnDB.V_9AHXukieF
  SysFS ID: /class/block/sr0
  SysFS BusID: 1:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:01.1/host1/target1:0:0/1:0:0:0
  Hardware Class: cdrom
  Model: "VBOX CD-ROM"
  Vendor: "VBOX"
  Device: "CD-ROM"
  Revision: "1.0"
  Driver: "ata_piix", "sr"
  Device File: /dev/sr0 (/dev/sg2)
  Device Files: /dev/sr0, /dev/block/11:0, /dev/scd0, /dev/disk/by-path/pci-0000:00:01.1-scsi-1:0:0:0, /dev/cdrom, /dev/dvd
  Device Number: block 11:0 (char 21:2)
  Features: DVD
  Drive status: no medium
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #3 (IDE interface)
  Drive Speed: 32

La ligne Device File indique quel est le fichier de bloc qui relie vers le lecteur de CD-ROM ; dans cet exemple, c'est /dev/sr0.
La ligne Device Files indique tous les autres fichiers de bloc qui pourraient aussi être utilisés pour relier vers ce périphérique ; dans cet exemple, on retrouve /dev/block/11:0, /dev/scd0, /dev/disk/by-path/pci-0000:00:01.1-scsi-1:0:0:0, /dev/cdrom et /dev/dvd.

Caocoa · Le 18/12/2009, à 00:36

Quel suivi, voyons ce que ça donne !

Caocoa · Le 19/12/2009, à 16:26

J'indique le retour de l'invite dmesg :caocoa@C40C04:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-16-generic-pae (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 05:20:21 UTC 2009 (Ubuntu 2.6.31-16.53-generic-pae)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf8b1000 (usable)
[ 0.000000] BIOS-e820: 00000000bf8b1000 - 00000000bf8b7000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf8b7000 - 00000000bf9bc000 (usable)
[ 0.000000] BIOS-e820: 00000000bf9bc000 - 00000000bfa0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfa0f000 - 00000000bfb08000 (usable)
[ 0.000000] BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfd0f000 - 00000000bfd19000 (usable)
[ 0.000000] BIOS-e820: 00000000bfd19000 - 00000000bfd1f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfd1f000 - 00000000bfd64000 (usable)
[ 0.000000] BIOS-e820: 00000000bfd64000 - 00000000bfd9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfd9f000 - 00000000bfde4000 (usable)
[ 0.000000] BIOS-e820: 00000000bfde4000 - 00000000bfdfd000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfdfd000 - 00000000bfe00000 (usable)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0FFE00000 mask FFFF80000 write-protect
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f400 (usable)
[ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] modified: 00000000000d8000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf8b1000 (usable)
[ 0.000000] modified: 00000000bf8b1000 - 00000000bf8b7000 (reserved)
[ 0.000000] modified: 00000000bf8b7000 - 00000000bf9bc000 (usable)
[ 0.000000] modified: 00000000bf9bc000 - 00000000bfa0f000 (reserved)
[ 0.000000] modified: 00000000bfa0f000 - 00000000bfb08000 (usable)
[ 0.000000] modified: 00000000bfb08000 - 00000000bfd0f000 (reserved)
[ 0.000000] modified: 00000000bfd0f000 - 00000000bfd19000 (usable)
[ 0.000000] modified: 00000000bfd19000 - 00000000bfd1f000 (reserved)
[ 0.000000] modified: 00000000bfd1f000 - 00000000bfd64000 (usable)
[ 0.000000] modified: 00000000bfd64000 - 00000000bfd9f000 (ACPI NVS)
[ 0.000000] modified: 00000000bfd9f000 - 00000000bfde4000 (usable)
[ 0.000000] modified: 00000000bfde4000 - 00000000bfdfd000 (ACPI data)
[ 0.000000] modified: 00000000bfdfd000 - 00000000bfe00000 (usable)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 7000-d000
[ 0.000000] RAMDISK: 37799000 - 37fef146
[ 0.000000] Allocated new RAMDISK: 008b5000 - 0110b146
[ 0.000000] Move RAMDISK from 0000000037799000 - 0000000037fef145 to 008b5000 - 0110b145
[ 0.000000] ACPI: RSDP 000f6750 00024 (v02 TOSCPL)
[ 0.000000] ACPI: XSDT bfdf45d6 00064 (v01 TOSCPL TOSCPL00 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP bfde6000 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT bfde7000 0853A (v02 Intel CANTIGA 06040000 INTL 20060608)
[ 0.000000] ACPI: FACS bfd9efc0 00040
[ 0.000000] ACPI: HPET bfdfcd14 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG bfdfcd4c 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: SLIC bfdfcd88 00176 (v01 TOSCPL TOSCPL00 06040000 LOHR 00000000)
[ 0.000000] ACPI: OSFR bfdfcefe 00072 (v01 TOSHIB A+2nd ID 06040000 TASM 04010000)
[ 0.000000] ACPI: APIC bfdfcf70 00068 (v01 PTLTD APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT bfdfcfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT bfde5000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4230MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] node 0 low ram: 00000000 - 379fe000
[ 0.000000] node 0 bootmap 00009000 - 0000ff40
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008ad9a0] TEXT DATA BSS ==> [0000100000 - 00008ad9a0]
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
[ 0.000000] #5 [00008ae000 - 00008b4174] BRK ==> [00008ae000 - 00008b4174]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [00008b5000 - 000110b146] NEW RAMDISK ==> [00008b5000 - 000110b146]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] found SMP MP-table at [c00f6810] f6810
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[10] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf8b1
[ 0.000000] 0: 0x000bf8b7 -> 0x000bf9bc
[ 0.000000] 0: 0x000bfa0f -> 0x000bfb08
[ 0.000000] 0: 0x000bfd0f -> 0x000bfd19
[ 0.000000] 0: 0x000bfd1f -> 0x000bfd64
[ 0.000000] 0: 0x000bfd9f -> 0x000bfde4
[ 0.000000] 0: 0x000bfdfd -> 0x000bfe00
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1047265
[ 0.000000] free_area_init_node: node 0, pgdat c078bd20, node_mem_map c110c000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 8461 pages used for memmap
[ 0.000000] HighMem zone: 811067 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000d8000
[ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at bfe00000 (gap: bfe00000:40200000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c391c000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037024
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic-pae root=UUID=a5ccac57-3ecd-4be1-8e51-51ae769e759d ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 26214400 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000379fe:00140000)
[ 0.000000] Memory: 4104264k/5242880k available (4590k kernel code, 83992k reserved, 2147k data, 544k init, 3278112k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc0795000 - 0xc081d000 ( 544 kB)
[ 0.000000] .data : 0xc057b994 - 0xc07947a8 (2147 kB)
[ 0.000000] .text : 0xc0100000 - 0xc057b994 (4590 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2128.397 MHz processor.
[ 0.001215] Console: colour VGA+ 80x25
[ 0.001218] console [tty0] enabled
[ 0.001374] hpet clockevent registered
[ 0.001379] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.001384] Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.79 BogoMIPS (lpj=8513588)
[ 0.001400] Security Framework initialized
[ 0.001418] AppArmor: AppArmor initialized
[ 0.001424] Mount-cache hash table entries: 512
[ 0.001533] Initializing cgroup subsys ns
[ 0.001537] Initializing cgroup subsys cpuacct
[ 0.001541] Initializing cgroup subsys memory
[ 0.001547] Initializing cgroup subsys freezer
[ 0.001549] Initializing cgroup subsys net_cls
[ 0.001562] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001564] CPU: L2 cache: 3072K
[ 0.001567] CPU: Physical Processor ID: 0
[ 0.001568] CPU: Processor Core ID: 0
[ 0.001571] mce: CPU supports 6 MCE banks
[ 0.001579] CPU0: Thermal monitoring enabled (TM2)
[ 0.001582] using mwait in idle threads.
[ 0.001587] Performance Counters: Core2 events, Intel PMU driver.
[ 0.001593] ... version: 2
[ 0.001594] ... bit width: 40
[ 0.001596] ... generic counters: 2
[ 0.001597] ... value mask: 000000ffffffffff
[ 0.001599] ... max period: 000000007fffffff
[ 0.001601] ... fixed-purpose counters: 3
[ 0.001602] ... counter mask: 0000000700000003
[ 0.001606] Checking 'hlt' instruction... OK.
[ 0.018558] ACPI: Core revision 20090521
[ 0.032391] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072429] CPU0: Intel(R) Core(TM)2 Duo CPU P7450 @ 2.13GHz stepping 06
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4255.96 BogoMIPS (lpj=8511934)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.161504] CPU1: Intel(R) Core(TM)2 Duo CPU P7450 @ 2.13GHz stepping 06
[ 0.161516] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164018] Brought up 2 CPUs
[ 0.164021] Total of 2 processors activated (8512.76 BogoMIPS).
[ 0.164069] CPU0 attaching sched-domain:
[ 0.164072] domain 0: span 0-1 level MC
[ 0.164074] groups: 0 1
[ 0.164079] CPU1 attaching sched-domain:
[ 0.164081] domain 0: span 0-1 level MC
[ 0.164084] groups: 1 0
[ 0.164153] Booting paravirtualized kernel on bare hardware
[ 0.164190] regulator: core version 0.5
[ 0.164190] Time: 14:34:40 Date: 12/19/09
[ 0.164190] NET: Registered protocol family 16
[ 0.164191] EISA bus registered
[ 0.164199] ACPI: bus type pci registered
[ 0.164261] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.164263] PCI: Not using MMCONFIG.
[ 0.164640] PCI: PCI BIOS revision 3.00 entry at 0xfdde1, last bus=38
[ 0.164642] PCI: Using configuration type 1 for base access
[ 0.165556] bio: create slab <bio-0> at 0
[ 0.168753] ACPI: EC: Look up EC in DSDT
[ 0.171905] ACPI: BIOS _OSI(Linux) query ignored
[ 0.173399] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.200067] ACPI: Interpreter enabled
[ 0.200072] ACPI: (supports S0 S3 S4 S5)
[ 0.200126] ACPI: Using IOAPIC for interrupt routing
[ 0.200174] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.240379] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.240381] PCI: Using MMCONFIG for extended config space
[ 0.283406] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.283408] ACPI: EC: driver started in interrupt mode
[ 0.283665] ACPI: No dock devices found.
[ 0.284150] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.284248] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.284252] pci 0000:00:01.0: PME# disabled
[ 0.284350] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
[ 0.284444] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
[ 0.284538] pci 0000:00:1a.2: reg 20 io port: [0x1840-0x185f]
[ 0.284633] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf2504800-0xf2504bff]
[ 0.284702] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.284707] pci 0000:00:1a.7: PME# disabled
[ 0.284764] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf2500000-0xf2503fff]
[ 0.284825] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.284829] pci 0000:00:1b.0: PME# disabled
[ 0.284915] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.284920] pci 0000:00:1c.0: PME# disabled
[ 0.285010] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.285015] pci 0000:00:1c.2: PME# disabled
[ 0.285104] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.285108] pci 0000:00:1c.3: PME# disabled
[ 0.285199] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.285203] pci 0000:00:1c.5: PME# disabled
[ 0.285279] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f]
[ 0.285373] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f]
[ 0.285467] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf]
[ 0.285561] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf2504c00-0xf2504fff]
[ 0.285630] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.285635] pci 0000:00:1d.7: PME# disabled
[ 0.285890] pci 0000:00:1f.2: reg 10 io port: [0x18f0-0x18f7]
[ 0.285898] pci 0000:00:1f.2: reg 14 io port: [0x18e4-0x18e7]
[ 0.285906] pci 0000:00:1f.2: reg 18 io port: [0x18e8-0x18ef]
[ 0.285914] pci 0000:00:1f.2: reg 1c io port: [0x18e0-0x18e3]
[ 0.285921] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18df]
[ 0.285930] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf2504000-0xf25047ff]
[ 0.285977] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.285982] pci 0000:00:1f.2: PME# disabled
[ 0.286023] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff]
[ 0.286042] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
[ 0.286106] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.286113] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
[ 0.286121] pci 0000:01:00.0: reg 18 32bit mmio: [0xcfef0000-0xcfefffff]
[ 0.286145] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.286174] pci 0000:01:00.0: supports D1 D2
[ 0.286218] pci 0000:01:00.1: reg 10 32bit mmio: [0xcfeec000-0xcfeeffff]
[ 0.286278] pci 0000:01:00.1: supports D1 D2
[ 0.286347] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[ 0.286351] pci 0000:00:01.0: bridge 32bit mmio: [0xcfe00000-0xcfefffff]
[ 0.286355] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.286413] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
[ 0.286418] pci 0000:00:1c.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff]
[ 0.286426] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
[ 0.286489] pci 0000:0e:00.0: reg 10 io port: [0x4000-0x40ff]
[ 0.286516] pci 0000:0e:00.0: reg 18 64bit mmio: [0xf2010000-0xf2010fff]
[ 0.286534] pci 0000:0e:00.0: reg 20 64bit mmio: [0xf2000000-0xf200ffff]
[ 0.286545] pci 0000:0e:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.286601] pci 0000:0e:00.0: supports D1 D2
[ 0.286603] pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.286609] pci 0000:0e:00.0: PME# disabled
[ 0.286694] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff]
[ 0.286704] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf2000000-0xf20fffff]
[ 0.286797] pci 0000:14:00.0: reg 10 64bit mmio: [0xf2100000-0xf2101fff]
[ 0.286914] pci 0000:14:00.0: PME# supported from D0 D3hot D3cold
[ 0.286922] pci 0000:14:00.0: PME# disabled
[ 0.287008] pci 0000:00:1c.3: bridge 32bit mmio: [0xf2100000-0xf21fffff]
[ 0.287079] pci 0000:20:00.0: reg 10 32bit mmio: [0xf2200000-0xf22007ff]
[ 0.287092] pci 0000:20:00.0: reg 14 32bit mmio: [0xf2201000-0xf220107f]
[ 0.287127] pci 0000:20:00.0: reg 20 32bit mmio: [0xf2200c00-0xf2200c7f]
[ 0.287140] pci 0000:20:00.0: reg 24 32bit mmio: [0xf2200800-0xf220087f]
[ 0.287276] pci 0000:20:00.1: reg 10 32bit mmio: [0xf2201400-0xf22014ff]
[ 0.287448] pci 0000:20:00.2: reg 10 32bit mmio: [0xf2201800-0xf22018ff]
[ 0.287620] pci 0000:20:00.3: reg 10 32bit mmio: [0xf2201c00-0xf2201cff]
[ 0.287792] pci 0000:20:00.4: reg 10 32bit mmio: [0xf2202000-0xf22020ff]
[ 0.287975] pci 0000:00:1c.5: bridge 32bit mmio: [0xf2200000-0xf22fffff]
[ 0.288056] pci 0000:00:1e.0: transparent bridge
[ 0.288102] pci_bus 0000:00: on NUMA node 0
[ 0.288107] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.288231] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.288307] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.288453] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.288520] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.288583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.288650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.298829] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.298930] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.299029] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.299127] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.299226] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.299328] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.299426] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.299523] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.299686] SCSI subsystem initialized
[ 0.299703] libata version 3.00 loaded.
[ 0.299703] usbcore: registered new interface driver usbfs
[ 0.299703] usbcore: registered new interface driver hub
[ 0.299703] usbcore: registered new device driver usb
[ 0.299703] ACPI: WMI: Mapper loaded
[ 0.299703] PCI: Using ACPI for IRQ routing
[ 0.312010] Bluetooth: Core ver 2.15
[ 0.312022] NET: Registered protocol family 31
[ 0.312022] Bluetooth: HCI device and connection manager initialized
[ 0.312022] Bluetooth: HCI socket layer initialized
[ 0.312022] NetLabel: Initializing
[ 0.312022] NetLabel: domain hash size = 128
[ 0.312022] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.312029] NetLabel: unlabeled traffic allowed by default
[ 0.312059] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.312064] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.328005] pnp: PnP ACPI init
[ 0.328016] ACPI: bus type pnp registered
[ 0.348968] pnp: PnP ACPI: found 9 devices
[ 0.348970] ACPI: ACPI bus type pnp unregistered
[ 0.348973] PnPBIOS: Disabled by ACPI PNP
[ 0.348984] system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.348990] system 00:04: ioport range 0x480-0x48f has been reserved
[ 0.348993] system 00:04: ioport range 0xffff-0xffff has been reserved
[ 0.348995] system 00:04: ioport range 0xffff-0xffff has been reserved
[ 0.348998] system 00:04: ioport range 0x400-0x47f has been reserved
[ 0.349001] system 00:04: ioport range 0x1180-0x11ff has been reserved
[ 0.349004] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
[ 0.349006] system 00:04: ioport range 0xff2c-0xff7f has been reserved
[ 0.349012] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.349015] system 00:08: iomem range 0xfed10000-0xfed13fff has been reserved
[ 0.349018] system 00:08: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.349021] system 00:08: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.349024] system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.349026] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.349029] system 00:08: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.349032] system 00:08: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.383848] AppArmor: AppArmor Filesystem Enabled
[ 0.383928] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.383932] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 0.383936] pci 0000:00:01.0: MEM window: 0xcfe00000-0xcfefffff
[ 0.383941] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.383946] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.383950] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.383957] pci 0000:00:1c.0: MEM window: 0xf4000000-0xf5ffffff
[ 0.383963] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
[ 0.383972] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0e
[ 0.383977] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 0.383983] pci 0000:00:1c.2: MEM window: 0xc0000000-0xc00fffff
[ 0.383993] pci 0000:00:1c.2: PREFETCH window: 0x000000f2000000-0x000000f20fffff
[ 0.384002] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:14
[ 0.384004] pci 0000:00:1c.3: IO window: disabled
[ 0.384011] pci 0000:00:1c.3: MEM window: 0xf2100000-0xf21fffff
[ 0.384016] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.384022] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:20
[ 0.384025] pci 0000:00:1c.5: IO window: disabled
[ 0.384032] pci 0000:00:1c.5: MEM window: 0xf2200000-0xf22fffff
[ 0.384037] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.384042] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:26
[ 0.384045] pci 0000:00:1e.0: IO window: disabled
[ 0.384051] pci 0000:00:1e.0: MEM window: disabled
[ 0.384057] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.384067] alloc irq_desc for 16 on node -1
[ 0.384069] alloc kstat_irqs on node -1
[ 0.384073] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.384077] pci 0000:00:01.0: setting latency timer to 64
[ 0.384084] alloc irq_desc for 17 on node -1
[ 0.384086] alloc kstat_irqs on node -1
[ 0.384089] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.384094] pci 0000:00:1c.0: setting latency timer to 64
[ 0.384102] alloc irq_desc for 18 on node -1
[ 0.384103] alloc kstat_irqs on node -1
[ 0.384107] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.384111] pci 0000:00:1c.2: setting latency timer to 64
[ 0.384119] alloc irq_desc for 19 on node -1
[ 0.384121] alloc kstat_irqs on node -1
[ 0.384124] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.384129] pci 0000:00:1c.3: setting latency timer to 64
[ 0.384137] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.384142] pci 0000:00:1c.5: setting latency timer to 64
[ 0.384150] pci 0000:00:1e.0: setting latency timer to 64
[ 0.384155] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.384157] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.384160] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.384162] pci_bus 0000:01: resource 1 mem: [0xcfe00000-0xcfefffff]
[ 0.384165] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.384167] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
[ 0.384170] pci_bus 0000:02: resource 1 mem: [0xf4000000-0xf5ffffff]
[ 0.384172] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
[ 0.384175] pci_bus 0000:0e: resource 0 io: [0x4000-0x4fff]
[ 0.384177] pci_bus 0000:0e: resource 1 mem: [0xc0000000-0xc00fffff]
[ 0.384179] pci_bus 0000:0e: resource 2 pref mem [0xf2000000-0xf20fffff]
[ 0.384182] pci_bus 0000:14: resource 1 mem: [0xf2100000-0xf21fffff]
[ 0.384184] pci_bus 0000:20: resource 1 mem: [0xf2200000-0xf22fffff]
[ 0.384187] pci_bus 0000:26: resource 3 io: [0x00-0xffff]
[ 0.384189] pci_bus 0000:26: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.384216] NET: Registered protocol family 2
[ 0.384295] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.384557] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.384888] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.385062] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.385065] TCP reno registered
[ 0.385121] NET: Registered protocol family 1
[ 0.385170] Trying to unpack rootfs image as initramfs...
[ 0.501510] Switched to high resolution mode on CPU 1
[ 0.503968] Switched to high resolution mode on CPU 0
[ 0.585719] Freeing initrd memory: 8536k freed
[ 0.588974] Simple Boot Flag at 0x36 set to 0x1
[ 0.589142] cpufreq-nforce2: No nForce2 chipset.
[ 0.589169] Scanning for low memory corruption every 60 seconds
[ 0.589295] audit: initializing netlink socket (disabled)
[ 0.589353] type=2000 audit(1261233279.588:1): initialized
[ 0.597674] highmem bounce pool size: 64 pages
[ 0.597679] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.599180] VFS: Disk quotas dquot_6.5.2
[ 0.599270] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.599812] fuse init (API version 7.12)
[ 0.599890] msgmni has been set to 1631
[ 0.600156] alg: No test for stdrng (krng)
[ 0.600169] io scheduler noop registered
[ 0.600171] io scheduler anticipatory registered
[ 0.600173] io scheduler deadline registered
[ 0.600210] io scheduler cfq registered (default)
[ 0.600361] pci 0000:01:00.0: Boot video device
[ 0.600482] alloc irq_desc for 24 on node -1
[ 0.600484] alloc kstat_irqs on node -1
[ 0.600492] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.600499] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.600623] alloc irq_desc for 25 on node -1
[ 0.600625] alloc kstat_irqs on node -1
[ 0.600633] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.600644] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.600790] alloc irq_desc for 26 on node -1
[ 0.600792] alloc kstat_irqs on node -1
[ 0.600800] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.600811] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.600956] alloc irq_desc for 27 on node -1
[ 0.600958] alloc kstat_irqs on node -1
[ 0.600966] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.600977] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 0.601124] alloc irq_desc for 28 on node -1
[ 0.601125] alloc kstat_irqs on node -1
[ 0.601134] pcieport-driver 0000:00:1c.5: irq 28 for MSI/MSI-X
[ 0.601144] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.601248] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.601402] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.621068] ACPI: AC Adapter [ACAD] (on-line)
[ 0.621129] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.621132] ACPI: Power Button [PWRF]
[ 0.621188] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.621231] ACPI: Lid Switch [LID0]
[ 0.621273] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 0.621275] ACPI: Power Button [PWRB]
[ 0.622178] ACPI: SSDT bfd1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.622795] ACPI: SSDT bfd19620 005A3 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.625156] Monitor-Mwait will be used to enter C-1 state
[ 0.625180] Monitor-Mwait will be used to enter C-2 state
[ 0.625235] Monitor-Mwait will be used to enter C-3 state
[ 0.625266] Marking TSC unstable due to TSC halts in idle
[ 0.625348] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.625372] processor LNXCPU:00: registered as cooling_device0
[ 0.625862] ACPI: SSDT bfd1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.626261] ACPI: SSDT bfd1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.632799] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.632817] processor LNXCPU:01: registered as cooling_device1
[ 0.711313] isapnp: Scanning for PnP cards...
[ 0.944984] ACPI: Battery Slot [BAT1] (battery present)
[ 1.065648] isapnp: No Plug & Play device found
[ 1.066707] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.067866] brd: module loaded
[ 1.068270] loop: module loaded
[ 1.068330] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.068394] ahci 0000:00:1f.2: version 3.0
[ 1.068406] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.068435] alloc irq_desc for 29 on node -1
[ 1.068437] alloc kstat_irqs on node -1
[ 1.068447] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[ 1.068525] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.068528] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part
[ 1.068533] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.068783] scsi0 : ahci
[ 1.068861] scsi1 : ahci
[ 1.068918] scsi2 : ahci
[ 1.068974] scsi3 : ahci
[ 1.069037] scsi4 : ahci
[ 1.069099] scsi5 : ahci
[ 1.069138] ata1: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504100 irq 29
[ 1.069141] ata2: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504180 irq 29
[ 1.069143] ata3: DUMMY
[ 1.069145] ata4: DUMMY
[ 1.069148] ata5: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504300 irq 29
[ 1.069151] ata6: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504380 irq 29
[ 1.070018] Fixed MDIO Bus: probed
[ 1.070050] PPP generic driver version 2.4.2
[ 1.070122] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.070139] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1.070149] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.070152] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.070192] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.074111] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.074117] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.074130] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf2504800
[ 1.088017] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.088088] usb usb1: configuration #1 chosen from 1 choice
[ 1.088115] hub 1-0:1.0: USB hub found
[ 1.088122] hub 1-0:1.0: 6 ports detected
[ 1.088178] alloc irq_desc for 23 on node -1
[ 1.088180] alloc kstat_irqs on node -1
[ 1.088185] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.088194] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.088197] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.088229] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.092145] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.092151] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.092163] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf2504c00
[ 1.104017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.104070] usb usb2: configuration #1 chosen from 1 choice
[ 1.104094] hub 2-0:1.0: USB hub found
[ 1.104099] hub 2-0:1.0: 6 ports detected
[ 1.104154] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.104170] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.104187] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.104193] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.104196] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.104226] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.104258] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 1.104328] usb usb3: configuration #1 chosen from 1 choice
[ 1.104352] hub 3-0:1.0: USB hub found
[ 1.104357] hub 3-0:1.0: 2 ports detected
[ 1.104402] alloc irq_desc for 21 on node -1
[ 1.104404] alloc kstat_irqs on node -1
[ 1.104408] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.104414] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.104417] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.104445] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.104476] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 1.104546] usb usb4: configuration #1 chosen from 1 choice
[ 1.104569] hub 4-0:1.0: USB hub found
[ 1.104575] hub 4-0:1.0: 2 ports detected
[ 1.104621] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1.104628] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.104631] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.104658] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.104683] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
[ 1.104750] usb usb5: configuration #1 chosen from 1 choice
[ 1.104774] hub 5-0:1.0: USB hub found
[ 1.104779] hub 5-0:1.0: 2 ports detected
[ 1.104822] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.104828] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.104831] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.104859] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.104884] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 1.104953] usb usb6: configuration #1 chosen from 1 choice
[ 1.104976] hub 6-0:1.0: USB hub found
[ 1.104981] hub 6-0:1.0: 2 ports detected
[ 1.105033] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.105041] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.105044] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.105070] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.105094] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 1.105162] usb usb7: configuration #1 chosen from 1 choice
[ 1.105185] hub 7-0:1.0: USB hub found
[ 1.105191] hub 7-0:1.0: 2 ports detected
[ 1.105241] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.105247] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.105250] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.105276] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.105308] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 1.105381] usb usb8: configuration #1 chosen from 1 choice
[ 1.105404] hub 8-0:1.0: USB hub found
[ 1.105410] hub 8-0:1.0: 2 ports detected
[ 1.105494] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.150580] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.150585] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.150631] mice: PS/2 mouse device common for all mice
[ 1.150726] rtc_cmos 00:05: RTC can wake from S4
[ 1.150752] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.150782] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.150867] device-mapper: uevent: version 1.0.3
[ 1.151271] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.151348] device-mapper: multipath: version 1.1.0 loaded
[ 1.151350] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.151454] EISA: Probing bus 0 at eisa.0
[ 1.151460] Cannot allocate resource for EISA slot 1
[ 1.151462] Cannot allocate resource for EISA slot 2
[ 1.151464] Cannot allocate resource for EISA slot 3
[ 1.151466] Cannot allocate resource for EISA slot 4
[ 1.151483] EISA: Detected 0 cards.
[ 1.151624] cpuidle: using governor ladder
[ 1.151732] cpuidle: using governor menu
[ 1.152171] TCP cubic registered
[ 1.152313] NET: Registered protocol family 10
[ 1.152715] lo: Disabled Privacy Extensions
[ 1.153027] NET: Registered protocol family 17
[ 1.153042] Bluetooth: L2CAP ver 2.13
[ 1.153043] Bluetooth: L2CAP socket layer initialized
[ 1.153046] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.153048] Bluetooth: SCO socket layer initialized
[ 1.153079] Bluetooth: RFCOMM TTY layer initialized
[ 1.153082] Bluetooth: RFCOMM socket layer initialized
[ 1.153083] Bluetooth: RFCOMM ver 1.11
[ 1.153668] Using IPI No-Shortcut mode
[ 1.153723] PM: Resume from disk failed.
[ 1.153732] registered taskstats version 1
[ 1.153849] Magic number: 5:977:586
[ 1.153924] rtc_cmos 00:05: setting system clock to 2009-12-19 14:34:41 UTC (1261233281)
[ 1.153927] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.153929] EDD information not available.
[ 1.184946] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.396143] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.396183] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.400133] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 1.500086] Clocksource tsc unstable (delta = -263502944 ns)
[ 1.546246] usb 1-6: configuration #1 chosen from 1 choice
[ 1.552043] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.560050] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.561394] ata5.00: ATAPI: MATSHITADVD-RAM UJ880AS, 1.50, max UDMA/33
[ 1.563263] ata5.00: configured for UDMA/33
[ 1.623390] ata1.00: ATA-8: TOSHIBA MK3252GSX, LV010M, max UDMA/100
[ 1.623394] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.624343] ata1.00: configured for UDMA/100
[ 1.624437] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5
[ 1.624544] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.624578] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.624619] sd 0:0:0:0: [sda] Write Protect is off
[ 1.624622] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.624644] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.624751] sda:
[ 1.626268] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ880AS 1.50 PQ: 0 ANSI: 5
[ 1.627748] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.627751] Uniform CD-ROM driver Revision: 3.20
[ 1.627832] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.627878] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.673178] sda1 sda2 < sda5 sda6 sda7 > sda3
[ 1.715320] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.715363] Freeing unused kernel memory: 544k freed
[ 1.715644] Write protecting the kernel text: 4592k
[ 1.715728] Write protecting the kernel read-only data: 1836k
[ 1.817330] Linux agpgart interface v0.103
[ 1.848798] acpi device:05: registered as cooling_device2
[ 1.848992] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:03/input/input5
[ 1.849040] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.870057] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.870078] r8169 0000:0e:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.870126] r8169 0000:0e:00.0: setting latency timer to 64
[ 1.870184] alloc irq_desc for 30 on node -1
[ 1.870186] alloc kstat_irqs on node -1
[ 1.870202] r8169 0000:0e:00.0: irq 30 for MSI/MSI-X
[ 1.870777] eth0: RTL8102e at 0xf8316000, 00:23:5a:06:7a:2b, XID 34a00000 IRQ 30
[ 1.886323] usb 6-2: new low speed USB device using uhci_hcd and address 2
[ 1.907981] ohci1394 0000:20:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.907990] ohci1394 0000:20:00.0: setting latency timer to 64
[ 1.966082] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f2200000-f22007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 2.058025] usb 6-2: configuration #1 chosen from 1 choice
[ 2.065784] usbcore: registered new interface driver hiddev
[ 2.078147] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input6
[ 2.078213] generic-usb 0003:04F3:0210.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-2/input0
[ 2.078226] usbcore: registered new interface driver usbhid
[ 2.078229] usbhid: v2.6:USB HID core driver
[ 2.670019] xor: automatically using best checksumming function: pIII_sse
[ 2.688008] pIII_sse : 7872.000 MB/sec
[ 2.688010] xor: using function: pIII_sse (7872.000 MB/sec)
[ 2.690183] device-mapper: dm-raid45: initialized v0.2594b
[ 3.052885] PM: Starting manual resume from disk
[ 3.052889] PM: Resume from partition 8:5
[ 3.052891] PM: Checking hibernation image.
[ 3.053034] PM: Resume from disk failed.
[ 3.065977] EXT4-fs (sda6): barriers enabled
[ 3.094104] kjournald2 starting: pid 442, dev sda6:8, commit interval 5 seconds
[ 3.094115] EXT4-fs (sda6): delayed allocation enabled
[ 3.094119] EXT4-fs: file extents enabled
[ 3.094417] EXT4-fs: mballoc enabled
[ 3.094428] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 3.244332] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f92e0415085]
[ 3.676104] type=1505 audit(1261233284.022:2): operation="profile_load" pid=469 name=/usr/share/gdm/guest-session/Xsession
[ 3.705772] type=1505 audit(1261233284.051:3): operation="profile_load" pid=470 name=/sbin/dhclient3
[ 3.706462] type=1505 audit(1261233284.051:4): operation="profile_load" pid=470 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 3.706829] type=1505 audit(1261233284.051:5): operation="profile_load" pid=470 name=/usr/lib/connman/scripts/dhclient-script
[ 3.747886] type=1505 audit(1261233284.091:6): operation="profile_load" pid=471 name=/usr/bin/evince
[ 3.758750] type=1505 audit(1261233284.103:7): operation="profile_load" pid=471 name=/usr/bin/evince-previewer
[ 3.765176] type=1505 audit(1261233284.111:8): operation="profile_load" pid=471 name=/usr/bin/evince-thumbnailer
[ 3.773957] type=1505 audit(1261233284.119:9): operation="profile_load" pid=473 name=/usr/bin/virt-aa-helper
[ 14.048562] Adding 3148732k swap on /dev/sda5. Priority:-1 extents:1 across:3148732k
[ 14.055149] udev: starting version 147
[ 14.073206] lp: driver loaded but no devices found
[ 14.243171] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 14.243178] Disabling lock debugging due to kernel taint
[ 14.255080] EXT4-fs (sda6): internal journal on sda6:8
[ 14.309327] sdhci: Secure Digital Host Controller Interface driver
[ 14.309330] sdhci: Copyright(c) Pierre Ossman
[ 14.310495] sdhci-pci 0000:20:00.1: SDHCI controller found [197b:2382] (rev 0)
[ 14.310515] sdhci-pci 0000:20:00.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.310561] sdhci-pci 0000:20:00.1: setting latency timer to 64
[ 14.310595] Registered led device: mmc0::
[ 14.310627] mmc0: SDHCI controller on PCI [0000:20:00.1] using DMA
[ 14.310638] sdhci-pci 0000:20:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 14.310654] sdhci-pci 0000:20:00.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.310660] sdhci-pci 0000:20:00.2: Refusing to bind to secondary interface.
[ 14.310668] sdhci-pci 0000:20:00.2: PCI INT A disabled
[ 14.333812] alloc irq_desc for 22 on node -1
[ 14.333815] alloc kstat_irqs on node -1
[ 14.333822] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.333826] hda_intel: probe_mask set to 0x3 for device 1179:ff00
[ 14.333859] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.350333] [fglrx] Maximum main memory to use for locked dma buffers: 3854 MBytes.
[ 14.350657] [fglrx] vendor: 1002 device: 95c4 count: 1
[ 14.351151] [fglrx] ioport: bar 1, base 0x2000, size: 0x100
[ 14.351171] pci 0000:01:00.0: power state changed by ACPI to D0
[ 14.351180] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.351185] pci 0000:01:00.0: setting latency timer to 64
[ 14.351390] [fglrx] Kernel PAT support is enabled
[ 14.351410] [fglrx] module loaded - fglrx 8.66.10 [Sep 3 2009] with 1 minors
[ 14.353727] jmb38x_ms 0000:20:00.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.353735] jmb38x_ms 0000:20:00.3: setting latency timer to 64
[ 14.368977] Linux video capture interface: v2.00
[ 14.371661] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[ 14.375517] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input7
[ 14.375565] usbcore: registered new interface driver uvcvideo
[ 14.375569] USB Video Class driver (v0.1.0)
[ 14.392376] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.409926] cfg80211: Calling CRDA to update world regulatory domain
[ 14.449234] cfg80211: World regulatory domain updated:
[ 14.449237] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.449239] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.449242] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.449244] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.449247] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.449249] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.450175] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[ 14.450178] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 14.450243] iwlagn 0000:14:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 14.450253] iwlagn 0000:14:00.0: setting latency timer to 64
[ 14.450284] iwlagn 0000:14:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 14.472137] hda_codec: Unknown model for ALC272, trying auto-probe from BIOS...
[ 14.473048] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 14.491863] iwlagn 0000:14:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 14.491926] alloc irq_desc for 31 on node -1
[ 14.491928] alloc kstat_irqs on node -1
[ 14.491947] iwlagn 0000:14:00.0: irq 31 for MSI/MSI-X
[ 14.499815] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 14.526285] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 14.526312] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 14.651191] EXT4-fs (sda7): barriers enabled
[ 14.652349] kjournald2 starting: pid 946, dev sda7:8, commit interval 5 seconds
[ 14.652528] EXT4-fs (sda7): internal journal on sda7:8
[ 14.652533] EXT4-fs (sda7): delayed allocation enabled
[ 14.652537] EXT4-fs: file extents enabled
[ 14.652589] EXT4-fs: mballoc enabled
[ 14.652605] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 14.751014] psmouse serio1: ID: 73 02 0a
[ 14.923298] __ratelimit: 15 callbacks suppressed
[ 14.923301] type=1505 audit(1261229695.267:15): operation="profile_replace" pid=1155 name=/usr/share/gdm/guest-session/Xsession
[ 14.924903] type=1505 audit(1261229695.267:16): operation="profile_replace" pid=1156 name=/sbin/dhclient3
[ 14.925635] type=1505 audit(1261229695.271:17): operation="profile_replace" pid=1156 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 14.926005] type=1505 audit(1261229695.271:18): operation="profile_replace" pid=1156 name=/usr/lib/connman/scripts/dhclient-script
[ 14.926898] r8169: eth0: link down
[ 14.927079] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.933857] type=1505 audit(1261229695.279:19): operation="profile_replace" pid=1157 name=/usr/bin/evince
[ 14.937321] iwlagn 0000:14:00.0: firmware: requesting iwlwifi-5000-2.ucode
[ 14.944856] type=1505 audit(1261229695.287:20): operation="profile_replace" pid=1157 name=/usr/bin/evince-previewer
[ 14.955302] type=1505 audit(1261229695.298:21): operation="profile_replace" pid=1157 name=/usr/bin/evince-thumbnailer
[ 14.963903] type=1505 audit(1261229695.307:22): operation="profile_replace" pid=1163 name=/usr/bin/virt-aa-helper
[ 14.965437] type=1505 audit(1261229695.311:23): operation="profile_replace" pid=1164 name=/usr/lib/cups/backend/cups-pdf
[ 14.966238] type=1505 audit(1261229695.311:24): operation="profile_replace" pid=1164 name=/usr/sbin/cupsd
[ 15.008375] iwlagn 0000:14:00.0: loaded firmware version 8.24.2.12
[ 15.157298] Registered led device: iwl-phy0::radio
[ 15.157317] Registered led device: iwl-phy0::assoc
[ 15.157333] Registered led device: iwl-phy0::RX
[ 15.157349] Registered led device: iwl-phy0::TX
[ 15.173641] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.657705] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input9
[ 15.846678] Bridge firewalling registered
[ 15.856645] virbr0: starting userspace STP failed, starting kernel STP
[ 15.886716] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 15.886906] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 15.886909] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 15.886911] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 16.005150] ppdev: user-space parallel port driver
[ 16.026839] lo: Disabled Privacy Extensions
[ 17.829991] alloc irq_desc for 32 on node -1
[ 17.829994] alloc kstat_irqs on node -1
[ 17.830007] fglrx_pci 0000:01:00.0: irq 32 for MSI/MSI-X
[ 17.830566] [fglrx] Firegl kernel thread PID: 1935
[ 18.325259] [fglrx] Gart USWC size:1254 M.
[ 18.325263] [fglrx] Gart cacheable size:498 M.
[ 18.325268] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 18.325270] [fglrx] Reserved FB block: Unshared offset:fc0c000, size:3ef000
[ 18.325273] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
[ 18.858412] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt source ff000066 is not supported on this hardware (return code = 1)
[ 21.437121] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 39.234908] padlock: VIA PadLock not detected.
[ 51.371468] wlan0: authenticate with AP 00:16:41:02:18:ea
[ 51.373506] wlan0: authenticated
[ 51.373509] wlan0: associate with AP 00:16:41:02:18:ea
[ 51.376364] wlan0: RX AssocResp from 00:16:41:02:18:ea (capab=0x411 status=0 aid=1)
[ 51.376367] wlan0: associated
[ 51.379265] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 62.077023] wlan0: no IPv6 routers present
[ 76.036088] CE: hpet increasing min_delta_ns to 15000 nsec
[ 76.036196] CE: hpet increasing min_delta_ns to 22500 nsec
[ 251.809335] CE: hpet increasing min_delta_ns to 33750 nsec
[ 2786.978251] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt source ff000066 is not supported on this hardware (return code = 1)
[ 3003.569862] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt source ff000066 is not supported on this hardware (return code = 1)

--------------------------------------------------------------------
Voila ! J'ai dû augmenter le cache pour obtenir l'intégralité (donc >512).

Maintenant, comment l'interpréter ?

Dernière modification par Caocoa (Le 19/12/2009, à 16:38)

Caocoa · Le 24/12/2009, à 20:53

En fait, mon problème est que ce Dvd ne se monte pas et bien que la commande "dvd+rw-format" le détecte, elle est inopérante :

caocoa@C40C04:~$ dvd+rw-format -force $dev/sr0
* BD/DVD±RW/-RAM format utility by <appro@fy.chalmers.se>, version 7.1.
:-( unable to open("/sr0"): No such file or directory

ou encore avec l'option plus puissante :

caocoa@C40C04:~$ dvd+rw-format -force=full -blank=full /dev/sr0
* BD/DVD±RW/-RAM format utility by <appro@fy.chalmers.se>, version 7.1.
* 4.7GB DVD+RW media detected.
- illegal command-line option for this media.
- you have the option to re-run dvd+rw-format with:
  -lead-out  to elicit lead-out relocation for better
             DVD-ROM compatibility, data is not affected;
  -force     to enforce new format (not recommended)
             and wipe the data.

4nTiM$ · Le 02/01/2010, à 13:44

Up... Même problème, mêmes conséquences, j'en suis au même point...

Sans doute depuis la dernière mise à jour de Brasero (qui marchait très bien jusque là)... Quand j'insère un DVD+RW vierge, ou que je formate un DVD+RW, impossible de le détecter, et le lecteur-graveur semble démonté.

cinaptix · Le 02/01/2010, à 15:03

Salut !
J'ai gravé des données sur un DVD-RW neuf que j'aimerai maintenant effacer.. J'ai utilisé l'outil du menu contextuel (de Brasero je présume) en désactiavant "effacement rapide" et là, bam !
Quand j'insère mon disque en théorie vierge, il n'est pas monté, je ne êux pas le voir ni graver de nouveau dessus.
Comment faire pour faire en sorte que je puisse de nouveau utiliser ce disque ?

Même problème pour moi.

J'ai formaté mes DVD-RW sous Windows pour les récupérer
Détail curieux, il faut graver un petit fichier dessus, pour qu'ensuite Ubuntu puisse les monter.

En fait, il ne faut jamais les formater avec la commande prévue dans Brasero, mais les utiliser normalement est faire le choix de l'effacement au moment de la gravure.

Les gravures en multi-sessions fonctionnent également.

Dernière modification par cinaptix (Le 02/01/2010, à 15:06)

Youpi741 · Le 26/02/2010, à 19:38

bonjour à vous !

bon, j'ai eu le même problême: après formatage avec brasero, mes dvd+RW sont inexploitable.
merci pour vos conseils et solutions, voila ce que j'ai essayé.

voila ce que me donne la commande :

dvd+rw-format -force=full -blank=full /dev/sr0
* BD/DVD±RW/-RAM format utility by <appro@fy.chalmers.se>, version 7.1.
:-( mounted media doesn't appear to be DVD±RW, DVD-RAM or Blu-ray

avec un autre dvd+rw formatter aussi par brasero j'ai :

~$ dvd+rw-format -force=full -blank=full /dev/sr0
* BD/DVD±RW/-RAM format utility by <appro@fy.chalmers.se>, version 7.1.
:-( can't locate appropriate format descriptor
* 8.5GB DVD+RW media detected.
:-[ READ DISC INFORMATION failed with SK=2h/MEDIUM NOT PRESENT - TRAY CLOSED]: No medium found
- illegal command-line option for this media.
- you have the option to re-run dvd+rw-format with:
  -lead-out  to elicit lead-out relocation for better
             DVD-ROM compatibility, data is not affected;
  -force     to enforce new format (not recommended)
             and wipe the data.

Très bizarre parceque le dvd fait 4,7GB à la base .... !!??!!!

comment est-ce possible ?

je n'ai pas encore essayé sous windows, à voire ....

Kedoc · Le 02/03/2010, à 11:41

Pour ma part, j'ai eu le même soucis que j'ai réglé avec K3B comme proposé plus haut dans ce topic.

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 15/12/2009, à 16:46

Problème d'effacement de DVD-RW par Brasero

#2 Le 16/12/2009, à 11:10

Re : Problème d'effacement de DVD-RW par Brasero

#3 Le 16/12/2009, à 15:58

Re : Problème d'effacement de DVD-RW par Brasero

#4 Le 16/12/2009, à 19:25

Re : Problème d'effacement de DVD-RW par Brasero

#5 Le 16/12/2009, à 19:39

Re : Problème d'effacement de DVD-RW par Brasero

#6 Le 17/12/2009, à 14:09

Re : Problème d'effacement de DVD-RW par Brasero

#7 Le 17/12/2009, à 22:08

Re : Problème d'effacement de DVD-RW par Brasero

#8 Le 17/12/2009, à 22:40

Re : Problème d'effacement de DVD-RW par Brasero

#9 Le 17/12/2009, à 23:06

Re : Problème d'effacement de DVD-RW par Brasero

#10 Le 18/12/2009, à 00:36

Re : Problème d'effacement de DVD-RW par Brasero

#11 Le 19/12/2009, à 16:26

Re : Problème d'effacement de DVD-RW par Brasero

#12 Le 24/12/2009, à 20:53

Re : Problème d'effacement de DVD-RW par Brasero

#13 Le 02/01/2010, à 13:44

Re : Problème d'effacement de DVD-RW par Brasero

#14 Le 02/01/2010, à 15:03

Re : Problème d'effacement de DVD-RW par Brasero

#15 Le 26/02/2010, à 19:38

Re : Problème d'effacement de DVD-RW par Brasero

#16 Le 02/03/2010, à 11:41

Re : Problème d'effacement de DVD-RW par Brasero

Pied de page des forums