#1 Le 02/01/2010, à 19:57
- newborn
[RÉSOLU] Carte Dlink DWA 610 non reconnue
Bonjour a tous.
Après avoir failli dans mes recherches, je viens demander un peu d' aide concernant mon probleme:
J' ai récupéré un vieux portable Fujitsu Amilo A1640 sur lequel j'ai mis une carte Dlink DWA-610 (branchée en PCMCIA donc) et qui a fonctionnée dès son branchement sur jaunty.
Normal me direz-vous, depuis la version 7.10 / 8.04 elle est reconnue out of the box comme confirmé ici : http://doc.ubuntu-fr.org/wifi_liste_carte#d
Cependant, depuis la migration (et même apres réinstallation complète) sur Karmic, elle ne clair plus au demarrage, je n'arrive à trouver aucune trace de son existence nulle part.
Mon systeme est bien à jour.
J' ai tenté de guetter un peu du coté des logs avec mes petites connaissances mais en vain.
Je signale que je poste ici bien qu' un autre soit quelque peu similaire, la carte apparaissant cependant dans dmesg dans l'autre cas, je pense qu' il est préférable de créer un nouveau fil de discussion.Pour les curieux voici l' autre post :
http://forum.ubuntu-fr.org/viewtopic.php?id=333537
Je poste le résultat des commandes demandées :
cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=9.10
DISTRIB_CODENAME=karmic
DISTRIB_DESCRIPTION="Ubuntu 9.10"lsusb (pas tres utile je pense)
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hublspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
00:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
00:09.0 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
00:09.1 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
00:09.2 System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapterlspci -nn | grep -i net
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 91)sudo lshw -C Network
-network
description: Ethernet interface
product: SiS900 PCI Fast Ethernet
vendor: Silicon Integrated Systems [SiS]
physical id: 4
bus info: pci@0000:00:04.0
logical name: eth0
version: 91
serial: 00:03:0d:1c:d4:50
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sis900 driverversion=v1.08.10 Apr. 2 2006 duplex=full ip=192.168.1.29 latency=64 link=yes maxlatency=11 mingnt=52 multicast=yes port=MII speed=100MB/s
resources: irq:19 ioport:d800(size=256) memory:dfffc000-dfffcfff memory:dffc0000-dffdffff(prefetchable)lsmod
Module Size Used by
cbc 3516 80
aes_i586 8124 81
aes_generic 27484 1 aes_i586
ecb 2524 1
binfmt_misc 8356 1
ppdev 6688 0
joydev 10272 0
dm_crypt 12928 0
snd_intel8x0 30168 2
snd_ac97_codec 101216 1 snd_intel8x0
ac97_bus 1532 1 snd_ac97_codec
snd_pcm_oss 37920 0
snd_mixer_oss 16028 1 snd_pcm_oss
snd_pcm 75296 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 2656 0
snd_seq_oss 28576 0
snd_seq_midi 6432 0
snd_rawmidi 22208 1 snd_seq_midi
iptable_filter 3100 0
pcmcia 36808 0
snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi
snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
ip_tables 11692 1 iptable_filter
x_tables 16544 1 ip_tables
snd_timer 22276 2 snd_pcm,snd_seq
snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
psmouse 56500 0
serio_raw 5280 0
k8temp 4188 0
i2c_sis96x 3904 0
snd 59204 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 7264 1 snd
snd_page_alloc 9156 2 snd_intel8x0,snd_pcm
yenta_socket 24200 2
rsrc_nonstatic 11644 1 yenta_socket
pcmcia_core 35792 3 pcmcia,yenta_socket,rsrc_nonstatic
shpchp 32272 0
lp 8964 0
parport 35340 2 ppdev,lp
sis_agp 6972 0
video 19380 0
output 2780 1 video
amd64_agp 9796 1
agpgart 34988 2 sis_agp,amd64_agp
sis900 19932 0
mii 5212 1 sis900
ohci1394 29900 0
ieee1394 86596 1 ohci1394iwconfig
lo no wireless extensions.
eth0 no wireless extensions.ifconfig
eth0 Link encap:Ethernet HWaddr 00:03:0d:1c:d4:50
inet adr:192.168.1.29 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::203:dff:fe1c:d450/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:20289 erreurs:0 :0 overruns:0 frame:0
TX packets:18096 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:23512859 (23.5 MB) Octets transmis:2116035 (2.1 MB)
Interruption:19 Adresse de base:0xd800
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:4 erreurs:0 :0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:240 (240.0 B) Octets transmis:240 (240.0 B)sudo iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.uname -r -m
2.6.31-16-generic i686cat /etc/network/interfaces
auto lo
iface lo inet loopbacknm-tool
NetworkManager Tool
State: connected
- Device: eth0 [Auto eth0] ----------------------------------------------------
Type: Wired
Driver: sis900
State: connected
Default: yes
HW Address: 00:03:0D:1C:D4:50
Capabilities:
Carrier Detect: yes
Speed: 100 Mb/s
Wired Properties
Carrier: on
IPv4 Settings:
Address: 192.168.1.29
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.1
DNS: 192.168.1.1Voila, j' ai dis et fait tout ce qui semble utile.
J' espere vivement comprendre ce qui peux bien se passer.Je signale aussi que la carte fonctionne normallement sous fedora.Ce dernier point m' a permit d' etre sur que ma carte n' etait tout simplement pas morte et fonctionnait comme à son premier branchement.
Je crois les doigts.Merci a tous!
Dernière modification par newborn (Le 09/01/2010, à 19:00)
Il vaut mieux mobiliser son intelligence sur des conneries que de mobiliser sa connerie sur des choses intelligentes
Hors ligne
#2 Le 02/01/2010, à 19:58
- anonyme1
Re : [RÉSOLU] Carte Dlink DWA 610 non reconnue
pour voir ta carte
lspcmcia -vvsudo -s
aptitude update && aptitude safe-upgrade
aptitude full-upgrade && aptitude install build-essential linux-headers-$(uname -r)
aptitude autoclean && update-pciids && update-usbids.sh && update-usbids && reboot
Hors ligne
#3 Le 02/01/2010, à 20:00
- newborn
Re : [RÉSOLU] Carte Dlink DWA 610 non reconnue
Screamer@onthelan a écrit :
pour voir ta carte
lspcmcia -vv
C' est du rapide !
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:00:09.0)
Configuration: state: on ready: unknown
--none--
--none--
Socket 1 Bridge: [yenta_cardbus] (bus ID: 0000:00:09.1)
Configuration: state: on ready: unknown
--none--
--none--Il vaut mieux mobiliser son intelligence sur des conneries que de mobiliser sa connerie sur des choses intelligentes
Hors ligne
#4 Le 02/01/2010, à 20:05
- anonyme1
Re : [RÉSOLU] Carte Dlink DWA 610 non reconnue
fail 
tape ces commandes, une ligne=une commande. C'est pour tout mettre à jour. A faire uniquement si ton poste est relié au net, au moins par câble 
sudo -s
aptitude update && aptitude safe-upgrade
aptitude full-upgrade
aptitude install build-essential linux-headers-$(uname -r)
aptitude autoclean && update-pciids && update-usbids.sh
rebootCe n'est pas l'ultime solution, c'est simplement pour s'assurer que le système soit bien à jour.
et reposte, la carte pcmcia insérée, les précédents retours de commandes.
Dernière modification par Screamer@onthelan (Le 02/01/2010, à 20:05)
sudo -s
aptitude update && aptitude safe-upgrade
aptitude full-upgrade && aptitude install build-essential linux-headers-$(uname -r)
aptitude autoclean && update-pciids && update-usbids.sh && update-usbids && reboot
Hors ligne
#5 Le 03/01/2010, à 00:06
- newborn
Re : [RÉSOLU] Carte Dlink DWA 610 non reconnue
Ok, c' est reparti
La mise a jour etait ok, par contre install fraiche = pas de build essential.Les pciids et usbids sont a jour et le reboot de l'histoire ancienne.
Je poste les résultats carte branchée (comme tout a l'heure d'ailleurs)
cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=9.10
DISTRIB_CODENAME=karmic
DISTRIB_DESCRIPTION="Ubuntu 9.10"
lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
lspcmcia -vv
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:00:09.0)
Configuration: state: on ready: unknown
--none--
--none--
Socket 1 Bridge: [yenta_cardbus] (bus ID: 0000:00:09.1)
Configuration: state: on ready: unknown
--none--
--none--
lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
00:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
00:09.0 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
00:09.1 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
00:09.2 System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter
lspci -nn | grep -i net
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 91)
sudo lshw -C network
*-network
description: Ethernet interface
product: SiS900 PCI Fast Ethernet
vendor: Silicon Integrated Systems [SiS]
physical id: 4
bus info: pci@0000:00:04.0
logical name: eth0
version: 91
serial: 00:03:0d:1c:d4:50
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sis900 driverversion=v1.08.10 Apr. 2 2006 duplex=full ip=192.168.1.29 latency=64 link=yes maxlatency=11 mingnt=52 multicast=yes port=MII speed=100MB/s
resources: irq:19 ioport:d800(size=256) memory:dfffc000-dfffcfff memory:dffc0000-dffdffff(prefetchable)
lsmod
Module Size Used by
cbc 3516 163
aes_i586 8124 164
aes_generic 27484 1 aes_i586
ecb 2524 1
binfmt_misc 8356 1
ppdev 6688 0
joydev 10272 0
dm_crypt 12928 0
snd_intel8x0 30168 2
snd_ac97_codec 101216 1 snd_intel8x0
ac97_bus 1532 1 snd_ac97_codec
snd_pcm_oss 37920 0
snd_mixer_oss 16028 1 snd_pcm_oss
snd_pcm 75296 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 2656 0
iptable_filter 3100 0
snd_seq_oss 28576 0
pcmcia 36808 0
ip_tables 11692 1 iptable_filter
x_tables 16544 1 ip_tables
psmouse 56500 0
serio_raw 5280 0
snd_seq_midi 6432 0
snd_rawmidi 22208 1 snd_seq_midi
snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi
snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 22276 2 snd_pcm,snd_seq
snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 59204 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
k8temp 4188 0
yenta_socket 24200 2
rsrc_nonstatic 11644 1 yenta_socket
pcmcia_core 35792 3 pcmcia,yenta_socket,rsrc_nonstatic
soundcore 7264 1 snd
snd_page_alloc 9156 2 snd_intel8x0,snd_pcm
i2c_sis96x 3904 0
shpchp 32272 0
lp 8964 0
parport 35340 2 ppdev,lp
sis_agp 6972 0
video 19380 0
output 2780 1 video
amd64_agp 9796 1
agpgart 34988 2 sis_agp,amd64_agp
sis900 19932 0
mii 5212 1 sis900
ohci1394 29900 0
ieee1394 86596 1 ohci1394
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
ifconfig
eth0 Link encap:Ethernet HWaddr 00:03:0d:1c:d4:50
inet adr:192.168.1.29 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::203:dff:fe1c:d450/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:3713 erreurs:0 :0 overruns:0 frame:0
TX packets:3947 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:2973676 (2.9 MB) Octets transmis:625055 (625.0 KB)
Interruption:19 Adresse de base:0xd800
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:4 erreurs:0 :0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:240 (240.0 B) Octets transmis:240 (240.0 B)
sudo iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
uname -r -m
2.6.31-16-generic i686
cat /etc/network/interfaces
auto lo
iface lo inet loopback
nm-tool
NetworkManager Tool
State: connected
- Device: eth0 [Auto eth0] ----------------------------------------------------
Type: Wired
Driver: sis900
State: connected
Default: yes
HW Address: 00:03:0D:1C:D4:50
Capabilities:
Carrier Detect: yes
Speed: 100 Mb/s
Wired Properties
Carrier: on
IPv4 Settings:
Address: 192.168.1.29
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.1
DNS: 192.168.1.1C'est a n'y rien comprendre.C'est comme si elle n'etait même pas branchée.Elle est nulle part, ou alors je cherche mal.J'ai jamais rien vu de tel, je comprends que tu est précisé "carte branchée".
Voici dmesg, au cas ou...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-16-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 04:01:29 UTC 2009 (Ubuntu 2.6.31-16.53-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001dfd0000 (usable)
[ 0.000000] BIOS-e820: 000000001dfd0000 - 000000001dfdf000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001dfdf000 - 000000001e000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x1dfd0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFE0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000001dfd0000 (usable)
[ 0.000000] modified: 000000001dfd0000 - 000000001dfdf000 (ACPI data)
[ 0.000000] modified: 000000001dfdf000 - 000000001e000000 (ACPI NVS)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-000000001dfd0000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001dc00000 page 2M
[ 0.000000] 001dc00000 - 001dfd0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1dfd0000 @ 10000-15000
[ 0.000000] RAMDISK: 16083000 - 1681b875
[ 0.000000] ACPI: RSDP 000f7380 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 1dfd0000 00030 (v01 A M I OEMRSDT 09000417 MSFT 00000097)
[ 0.000000] ACPI: FACP 1dfd0200 00081 (v02 A M I OEMFACP 09000417 MSFT 00000097)
[ 0.000000] ACPI: DSDT 1dfd03f0 03408 (v01 UW F11_____ 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 1dfdf000 00040
[ 0.000000] ACPI: APIC 1dfd0390 00054 (v01 A M I OEMAPIC 09000417 MSFT 00000097)
[ 0.000000] ACPI: OEMB 1dfdf040 00109 (v01 A M I AMI_OEM 09000417 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 479MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1dfd0000
[ 0.000000] low ram: 0 - 1dfd0000
[ 0.000000] node 0 low ram: 00000000 - 1dfd0000
[ 0.000000] node 0 bootmap 00011000 - 00014bfc
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001dfd0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [0016083000 - 001681b875] RAMDISK ==> [0016083000 - 001681b875]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00008a9000 - 00008ac14d] BRK ==> [00008a9000 - 00008ac14d]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001dfd0
[ 0.000000] HighMem 0x0001dfd0 -> 0x0001dfd0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001dfd0
[ 0.000000] On node 0 totalpages: 122719
[ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 928 pages used for memmap
[ 0.000000] Normal zone: 117808 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 1e000000 (gap: 1e000000:e1f80000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c13c2000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121759
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic root=UUID=a76613dd-5918-48f5-9cb2-bf6d9e803423 ro quiet splash
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2456320 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 468336k/491328k available (4566k kernel code, 22364k reserved, 2142k data, 540k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xde7d0000 - 0xff7fe000 ( 528 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xddfd0000 ( 479 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575bb4 - 0xc078d3c8 (2142 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575bb4 (4566 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 798.219 MHz processor.
[ 0.000013] spurious 8259A interrupt: IRQ7.
[ 0.000808] Console: colour VGA+ 80x25
[ 0.000815] console [tty0] enabled
[ 0.000915] Calibrating delay loop (skipped), value calculated using timer frequency.. 1596.43 BogoMIPS (lpj=3192876)
[ 0.000957] Security Framework initialized
[ 0.001000] AppArmor: AppArmor initialized
[ 0.001016] Mount-cache hash table entries: 512
[ 0.001240] Initializing cgroup subsys ns
[ 0.001249] Initializing cgroup subsys cpuacct
[ 0.001258] Initializing cgroup subsys memory
[ 0.001274] Initializing cgroup subsys freezer
[ 0.001279] Initializing cgroup subsys net_cls
[ 0.001302] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.001309] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.001316] mce: CPU supports 5 MCE banks
[ 0.001342] Performance Counters: AMD PMU driver.
[ 0.001369] ... version: 0
[ 0.001373] ... bit width: 48
[ 0.001378] ... generic counters: 4
[ 0.001383] ... value mask: 0000ffffffffffff
[ 0.001388] ... max period: 00007fffffffffff
[ 0.001393] ... fixed-purpose counters: 0
[ 0.001397] ... counter mask: 000000000000000f
[ 0.001406] Checking 'hlt' instruction... OK.
[ 0.017516] SMP alternatives: switching to UP code
[ 0.028030] Freeing SMP alternatives: 19k freed
[ 0.028072] ACPI: Core revision 20090521
[ 0.040400] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081209] CPU0: Mobile AMD Sempron(tm) Processor 2800+ stepping 02
[ 0.084001] Brought up 1 CPUs
[ 0.084001] Total of 1 processors activated (1596.43 BogoMIPS).
[ 0.084001] CPU0 attaching NULL sched-domain.
[ 0.084001] Booting paravirtualized kernel on bare hardware
[ 0.084001] regulator: core version 0.5
[ 0.084001] Time: 21:11:51 Date: 01/02/10
[ 0.084001] NET: Registered protocol family 16
[ 0.084001] EISA bus registered
[ 0.084001] ACPI: bus type pci registered
[ 0.084001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 0.084001] PCI: Using configuration type 1 for base access
[ 0.084838] bio: create slab <bio-0> at 0
[ 0.085766] ACPI: EC: Look up EC in DSDT
[ 0.087626] ACPI Warning: Package List length (10A) larger than NumElements count (2), truncated
[ 0.087639] 20090521 dsobject-502
[ 0.093681] ACPI: Interpreter enabled
[ 0.093691] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.093742] ACPI: Using IOAPIC for interrupt routing
[ 0.094365] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 0.096012] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.110272] ACPI: EC: GPE = 0x2, I/O: command/status = 0x66, data = 0x62
[ 0.110278] ACPI: EC: driver started in interrupt mode
[ 0.110427] ACPI Warning: Incorrect checksum in table [OEMB] - 2B, should be 20 20090521 tbutils-246
[ 0.110622] ACPI: No dock devices found.
[ 0.110767] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.110852] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe1ffffff]
[ 0.110991] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.111038] pci 0000:00:02.1: reg 20 io port: [0xc00-0xc1f]
[ 0.111093] pci 0000:00:02.5: reg 20 io port: [0xffa0-0xffaf]
[ 0.111141] pci 0000:00:02.6: reg 10 io port: [0xe400-0xe4ff]
[ 0.111151] pci 0000:00:02.6: reg 14 io port: [0xe000-0xe07f]
[ 0.111191] pci 0000:00:02.6: supports D1 D2
[ 0.111197] pci 0000:00:02.6: PME# supported from D3hot D3cold
[ 0.111205] pci 0000:00:02.6: PME# disabled
[ 0.111244] pci 0000:00:02.7: reg 10 io port: [0xe800-0xe8ff]
[ 0.111255] pci 0000:00:02.7: reg 14 io port: [0xec00-0xec7f]
[ 0.111294] pci 0000:00:02.7: supports D1 D2
[ 0.111300] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.111307] pci 0000:00:02.7: PME# disabled
[ 0.111334] pci 0000:00:03.0: reg 10 32bit mmio: [0xdfffd000-0xdfffdfff]
[ 0.111387] pci 0000:00:03.1: reg 10 32bit mmio: [0xdfffe000-0xdfffefff]
[ 0.111447] pci 0000:00:03.3: reg 10 32bit mmio: [0xdffff000-0xdfffffff]
[ 0.111489] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.111496] pci 0000:00:03.3: PME# disabled
[ 0.111537] pci 0000:00:04.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.111547] pci 0000:00:04.0: reg 14 32bit mmio: [0xdfffc000-0xdfffcfff]
[ 0.111573] pci 0000:00:04.0: reg 30 32bit mmio: [0xdffc0000-0xdffdffff]
[ 0.111594] pci 0000:00:04.0: supports D1 D2
[ 0.111599] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.111607] pci 0000:00:04.0: PME# disabled
[ 0.111645] pci 0000:00:06.0: reg 10 32bit mmio: [0xdfffb800-0xdfffbfff]
[ 0.111656] pci 0000:00:06.0: reg 14 32bit mmio: [0xdfff4000-0xdfff7fff]
[ 0.111696] pci 0000:00:06.0: supports D1 D2
[ 0.111701] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot
[ 0.111709] pci 0000:00:06.0: PME# disabled
[ 0.111749] pci 0000:00:09.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.111770] pci 0000:00:09.0: supports D1 D2
[ 0.111776] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.111784] pci 0000:00:09.0: PME# disabled
[ 0.111821] pci 0000:00:09.1: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.111842] pci 0000:00:09.1: supports D1 D2
[ 0.111848] pci 0000:00:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.111855] pci 0000:00:09.1: PME# disabled
[ 0.111895] pci 0000:00:09.2: reg 10 32bit mmio: [0xdfffa000-0xdfffafff]
[ 0.111939] pci 0000:00:09.2: supports D1 D2
[ 0.111945] pci 0000:00:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.111953] pci 0000:00:09.2: PME# disabled
[ 0.112152] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.112162] pci 0000:01:00.0: reg 14 32bit mmio: [0xdfee0000-0xdfefffff]
[ 0.112172] pci 0000:01:00.0: reg 18 io port: [0xcc00-0xcc7f]
[ 0.112199] pci 0000:01:00.0: supports D1 D2
[ 0.112232] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[ 0.112241] pci 0000:00:01.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
[ 0.112250] pci 0000:00:01.0: bridge 32bit mmio pref: [0xcfd00000-0xdfcfffff]
[ 0.112294] pci_bus 0000:00: on NUMA node 0
[ 0.112303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.157182] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.157382] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.157576] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.157767] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.157960] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 7 10 11 12 14 15)
[ 0.158156] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 10 11 12 14 15)
[ 0.158351] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.158546] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.158927] SCSI subsystem initialized
[ 0.159055] libata version 3.00 loaded.
[ 0.159211] usbcore: registered new interface driver usbfs
[ 0.159247] usbcore: registered new interface driver hub
[ 0.159296] usbcore: registered new device driver usb
[ 0.160164] ACPI: WMI: Mapper loaded
[ 0.160169] PCI: Using ACPI for IRQ routing
[ 0.160459] Bluetooth: Core ver 2.15
[ 0.160513] NET: Registered protocol family 31
[ 0.160518] Bluetooth: HCI device and connection manager initialized
[ 0.160524] Bluetooth: HCI socket layer initialized
[ 0.160529] NetLabel: Initializing
[ 0.160533] NetLabel: domain hash size = 128
[ 0.160537] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.160568] NetLabel: unlabeled traffic allowed by default
[ 0.163962] pnp: PnP ACPI init
[ 0.164034] ACPI: bus type pnp registered
[ 0.167198] pnp: PnP ACPI: found 10 devices
[ 0.167204] ACPI: ACPI bus type pnp unregistered
[ 0.167212] PnPBIOS: Disabled by ACPI PNP
[ 0.167241] system 00:07: ioport range 0x480-0x48f has been reserved
[ 0.167249] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.167257] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.167264] system 00:07: ioport range 0x880-0x8ff has been reserved
[ 0.167272] system 00:07: ioport range 0xc00-0xc1f has been reserved
[ 0.167282] system 00:07: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.167290] system 00:07: iomem range 0xffe80000-0xffefffff has been reserved
[ 0.167298] system 00:07: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.167312] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.167320] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.167343] system 00:09: iomem range 0x0-0x9ffff could not be reserved
[ 0.167351] system 00:09: iomem range 0xc0000-0xd0fff could not be reserved
[ 0.167359] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 0.167367] system 00:09: iomem range 0x100000-0x1fffffff could not be reserved
[ 0.202188] AppArmor: AppArmor Filesystem Enabled
[ 0.202259] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.202267] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.202277] pci 0000:00:01.0: MEM window: 0xdfe00000-0xdfefffff
[ 0.202286] pci 0000:00:01.0: PREFETCH window: 0xcfd00000-0xdfcfffff
[ 0.202296] pci 0000:00:09.0: CardBus bridge, secondary bus 0000:02
[ 0.202302] pci 0000:00:09.0: IO window: 0x001000-0x0010ff
[ 0.202311] pci 0000:00:09.0: IO window: 0x001400-0x0014ff
[ 0.202319] pci 0000:00:09.0: PREFETCH window: 0x20000000-0x23ffffff
[ 0.202327] pci 0000:00:09.0: MEM window: 0x24000000-0x27ffffff
[ 0.202335] pci 0000:00:09.1: CardBus bridge, secondary bus 0000:06
[ 0.202342] pci 0000:00:09.1: IO window: 0x001800-0x0018ff
[ 0.202349] pci 0000:00:09.1: IO window: 0x001c00-0x001cff
[ 0.202357] pci 0000:00:09.1: PREFETCH window: 0x28000000-0x2bffffff
[ 0.202366] pci 0000:00:09.1: MEM window: 0x2c000000-0x2fffffff
[ 0.202393] alloc irq_desc for 17 on node -1
[ 0.202398] alloc kstat_irqs on node -1
[ 0.202411] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.202425] pci 0000:00:09.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.202438] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.202445] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.202453] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.202459] pci_bus 0000:01: resource 1 mem: [0xdfe00000-0xdfefffff]
[ 0.202466] pci_bus 0000:01: resource 2 pref mem [0xcfd00000-0xdfcfffff]
[ 0.202474] pci_bus 0000:02: resource 0 io: [0x1000-0x10ff]
[ 0.202480] pci_bus 0000:02: resource 1 io: [0x1400-0x14ff]
[ 0.202487] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x23ffffff]
[ 0.202495] pci_bus 0000:02: resource 3 mem: [0x24000000-0x27ffffff]
[ 0.202502] pci_bus 0000:06: resource 0 io: [0x1800-0x18ff]
[ 0.202508] pci_bus 0000:06: resource 1 io: [0x1c00-0x1cff]
[ 0.202515] pci_bus 0000:06: resource 2 pref mem [0x28000000-0x2bffffff]
[ 0.202522] pci_bus 0000:06: resource 3 mem: [0x2c000000-0x2fffffff]
[ 0.202601] NET: Registered protocol family 2
[ 0.202811] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.203436] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.203617] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.203802] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.203808] TCP reno registered
[ 0.203966] NET: Registered protocol family 1
[ 0.204115] Trying to unpack rootfs image as initramfs...
[ 0.704055] Switched to high resolution mode on CPU 0
[ 0.741976] Freeing initrd memory: 7778k freed
[ 0.753511] cpufreq-nforce2: No nForce2 chipset.
[ 0.753565] Scanning for low memory corruption every 60 seconds
[ 0.753781] audit: initializing netlink socket (disabled)
[ 0.753825] type=2000 audit(1262466711.752:1): initialized
[ 0.776377] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.779511] VFS: Disk quotas dquot_6.5.2
[ 0.779638] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.780889] fuse init (API version 7.12)
[ 0.781073] msgmni has been set to 930
[ 0.781511] alg: No test for stdrng (krng)
[ 0.781537] io scheduler noop registered
[ 0.781543] io scheduler anticipatory registered
[ 0.781548] io scheduler deadline registered
[ 0.781649] io scheduler cfq registered (default)
[ 0.824055] pci 0000:01:00.0: Boot video device
[ 0.824250] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.824301] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.825075] ACPI: AC Adapter [AC0] (on-line)
[ 0.825210] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.825219] ACPI: Power Button [PWRF]
[ 0.825341] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:05/PNP0C0D:00/input/input1
[ 0.825399] ACPI: Lid Switch [LID]
[ 0.825508] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.825517] ACPI: Sleep Button [SLPB]
[ 0.825612] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 0.825618] ACPI: Power Button [PWRB]
[ 0.825984] Marking TSC unstable due to TSC halts in idle
[ 0.826016] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.826064] processor LNXCPU:00: registered as cooling_device0
[ 0.829307] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.829324] ACPI: Thermal Zone [THRM] (75 C)
[ 0.829420] isapnp: Scanning for PnP cards...
[ 1.183429] isapnp: No Plug & Play device found
[ 1.186065] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.186652] alloc irq_desc for 18 on node -1
[ 1.186658] alloc kstat_irqs on node -1
[ 1.186673] serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.186684] serial 0000:00:02.6: PCI INT C disabled
[ 1.189001] brd: module loaded
[ 1.190092] loop: module loaded
[ 1.190271] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.191650] pata_sis 0000:00:02.5: version 0.5.2
[ 1.191968] scsi0 : pata_sis
[ 1.192201] scsi1 : pata_sis
[ 1.193557] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.193564] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.194349] Fixed MDIO Bus: probed
[ 1.194434] PPP generic driver version 2.4.2
[ 1.194641] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.194679] alloc irq_desc for 23 on node -1
[ 1.194684] alloc kstat_irqs on node -1
[ 1.194699] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.194727] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 1.194836] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 1.194890] ehci_hcd 0000:00:03.3: cache line size of 64 is not supported
[ 1.194918] ehci_hcd 0000:00:03.3: irq 23, io mem 0xdffff000
[ 1.204018] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 1.204175] usb usb1: configuration #1 chosen from 1 choice
[ 1.204248] hub 1-0:1.0: USB hub found
[ 1.204267] hub 1-0:1.0: 6 ports detected
[ 1.204390] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.204427] alloc irq_desc for 20 on node -1
[ 1.204432] alloc kstat_irqs on node -1
[ 1.204445] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.204468] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 1.204539] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 1.204581] ohci_hcd 0000:00:03.0: irq 20, io mem 0xdfffd000
[ 1.236001] ACPI: Battery Slot [BAT0] (battery present)
[ 1.262157] usb usb2: configuration #1 chosen from 1 choice
[ 1.262219] hub 2-0:1.0: USB hub found
[ 1.262253] hub 2-0:1.0: 3 ports detected
[ 1.262354] alloc irq_desc for 21 on node -1
[ 1.262359] alloc kstat_irqs on node -1
[ 1.262371] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.262391] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 1.262466] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 1.262502] ohci_hcd 0000:00:03.1: irq 21, io mem 0xdfffe000
[ 1.318135] usb usb3: configuration #1 chosen from 1 choice
[ 1.318193] hub 3-0:1.0: USB hub found
[ 1.318209] hub 3-0:1.0: 3 ports detected
[ 1.318311] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.318494] PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.323041] i8042.c: Detected active multiplexing controller, rev 1.0.
[ 1.323924] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.323937] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.323944] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.323952] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.323959] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.324093] mice: PS/2 mouse device common for all mice
[ 1.324417] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.324446] rtc0: alarms up to one month, 114 bytes nvram
[ 1.324673] device-mapper: uevent: version 1.0.3
[ 1.324872] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.325020] device-mapper: multipath: version 1.1.0 loaded
[ 1.325026] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.325299] EISA: Probing bus 0 at eisa.0
[ 1.325311] Cannot allocate resource for EISA slot 1
[ 1.325348] EISA: Detected 0 cards.
[ 1.325522] cpuidle: using governor ladder
[ 1.325647] cpuidle: using governor menu
[ 1.326786] TCP cubic registered
[ 1.327129] NET: Registered protocol family 10
[ 1.328137] lo: Disabled Privacy Extensions
[ 1.328867] NET: Registered protocol family 17
[ 1.328905] Bluetooth: L2CAP ver 2.13
[ 1.328909] Bluetooth: L2CAP socket layer initialized
[ 1.328916] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.328920] Bluetooth: SCO socket layer initialized
[ 1.329007] Bluetooth: RFCOMM TTY layer initialized
[ 1.329014] Bluetooth: RFCOMM socket layer initialized
[ 1.329018] Bluetooth: RFCOMM ver 1.11
[ 1.329047] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2800+ processors (1 cpu cores) (version 2.20.00)
[ 1.329127] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x8
[ 1.329133] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x13
[ 1.331918] Using IPI No-Shortcut mode
[ 1.332034] PM: Resume from disk failed.
[ 1.332055] registered taskstats version 1
[ 1.332192] Magic number: 10:960:195
[ 1.332294] rtc_cmos 00:02: setting system clock to 2010-01-02 21:11:52 UTC (1262466712)
[ 1.332298] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.332301] EDD information not available.
[ 1.332657] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.372571] ata1.00: ATA-6: FUJITSU MHT2040AT, 0022, max UDMA/100
[ 1.372576] ata1.00: 78140160 sectors, multi 16: LBA
[ 1.372601] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 1.404459] ata1.00: configured for UDMA/33
[ 1.404601] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2040A 0022 PQ: 0 ANSI: 5
[ 1.404751] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.404797] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.404850] sd 0:0:0:0: [sda] Write Protect is off
[ 1.404853] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.404880] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.405020] sda: sda1 sda2 < sda5 >
[ 1.453935] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.560161] ata2.01: NODEV after polling detection
[ 1.568438] ata2.00: ATAPI: QSI DVDRW SDW-041, DU07, max UDMA/33
[ 1.584567] ata2.00: configured for UDMA/33
[ 1.588388] scsi 1:0:0:0: CD-ROM QSI DVDRW SDW-041 DU07 PQ: 0 ANSI: 5
[ 1.594603] sr0: scsi3-mmc drive: 12x/24x writer cd/rw xa/form2 cdda tray
[ 1.594608] Uniform CD-ROM driver Revision: 3.20
[ 1.594700] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.594768] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.594798] Freeing unused kernel memory: 540k freed
[ 1.595439] Write protecting the kernel text: 4568k
[ 1.595478] Write protecting the kernel read-only data: 1836k
[ 1.700033] Clocksource tsc unstable (delta = 368244556 ns)
[ 1.864045] alloc irq_desc for 19 on node -1
[ 1.864050] alloc kstat_irqs on node -1
[ 1.864061] ohci1394 0000:00:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.867871] sis900.c: v1.08.10 Apr. 2 2006
[ 1.951028] Linux agpgart interface v0.103
[ 1.958138] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 1.958311] acpi device:04: registered as cooling_device1
[ 1.958420] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input6
[ 1.958468] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 2.000169] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dfffb800-dfffbfff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.000612] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.001758] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[ 2.010850] 0000:00:04.0: Using transceiver found at address 1 as default
[ 2.013048] eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 19, 00:03:0d:1c:d4:50
[ 2.013634] agpgart-amd64 0000:00:00.0: AGP bridge [1039/0760]
[ 2.015031] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xe0000000
[ 3.276179] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d5325531c57]
[ 3.373222] PM: Starting manual resume from disk
[ 3.373230] PM: Resume from partition 8:5
[ 3.373233] PM: Checking hibernation image.
[ 3.373567] PM: Resume from disk failed.
[ 3.405499] EXT4-fs (sda1): barriers enabled
[ 3.432232] kjournald2 starting: pid 372, dev sda1:8, commit interval 5 seconds
[ 3.432250] EXT4-fs (sda1): delayed allocation enabled
[ 3.432255] EXT4-fs: file extents enabled
[ 3.438285] EXT4-fs: mballoc enabled
[ 3.438305] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 4.500325] type=1505 audit(1262466715.667:2): operation="profile_load" pid=399 name=/usr/share/gdm/guest-session/Xsession
[ 4.504656] type=1505 audit(1262466715.671:3): operation="profile_load" pid=400 name=/sbin/dhclient3
[ 4.505027] type=1505 audit(1262466715.671:4): operation="profile_load" pid=400 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 4.505235] type=1505 audit(1262466715.671:5): operation="profile_load" pid=400 name=/usr/lib/connman/scripts/dhclient-script
[ 4.598762] type=1505 audit(1262466715.763:6): operation="profile_load" pid=401 name=/usr/bin/evince
[ 4.605248] type=1505 audit(1262466715.771:7): operation="profile_load" pid=401 name=/usr/bin/evince-previewer
[ 4.609206] type=1505 audit(1262466715.775:8): operation="profile_load" pid=401 name=/usr/bin/evince-thumbnailer
[ 4.639260] type=1505 audit(1262466715.803:9): operation="profile_load" pid=403 name=/usr/lib/cups/backend/cups-pdf
[ 17.689861] udev: starting version 147
[ 17.708596] Adding 1397612k swap on /dev/sda5. Priority:-1 extents:1 across:1397612k
[ 17.717847] lp: driver loaded but no devices found
[ 17.854585] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.863563] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[ 17.942753] yenta_cardbus 0000:00:09.0: CardBus bridge found [1734:106c]
[ 17.942771] yenta_cardbus 0000:00:09.0: O2: res at 0x94/0xD4: 00/ea
[ 17.942775] yenta_cardbus 0000:00:09.0: O2: enabling read prefetch/write burst
[ 18.013830] EXT4-fs (sda1): internal journal on sda1:8
[ 18.070019] yenta_cardbus 0000:00:09.0: ISA IRQ mask 0x0000, PCI irq 17
[ 18.070024] yenta_cardbus 0000:00:09.0: Socket status: 00000000
[ 18.070270] yenta_cardbus 0000:00:09.1: CardBus bridge found [1734:106c]
[ 18.208750] yenta_cardbus 0000:00:09.1: ISA IRQ mask 0x0000, PCI irq 17
[ 18.208756] yenta_cardbus 0000:00:09.1: Socket status: 00000000
[ 18.233872] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.380088] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 18.447686] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
[ 18.449351] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[ 18.450011] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 18.450063] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 18.450742] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 18.782377] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 18.784098] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 18.784766] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 18.784828] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 18.785525] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 19.031510] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x6eb1, caps: 0xa04711/0x40a
[ 19.049602] __ratelimit: 6 callbacks suppressed
[ 19.049608] type=1505 audit(1262466730.215:12): operation="profile_replace" pid=890 name=/usr/share/gdm/guest-session/Xsession
[ 19.052288] type=1505 audit(1262466730.219:13): operation="profile_replace" pid=891 name=/sbin/dhclient3
[ 19.052666] type=1505 audit(1262466730.219:14): operation="profile_replace" pid=891 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 19.052936] type=1505 audit(1262466730.219:15): operation="profile_replace" pid=891 name=/usr/lib/connman/scripts/dhclient-script
[ 19.061747] type=1505 audit(1262466730.227:16): operation="profile_replace" pid=892 name=/usr/bin/evince
[ 19.069520] type=1505 audit(1262466730.235:17): operation="profile_replace" pid=892 name=/usr/bin/evince-previewer
[ 19.073581] type=1505 audit(1262466730.239:18): operation="profile_replace" pid=892 name=/usr/bin/evince-thumbnailer
[ 19.081671] type=1505 audit(1262466730.247:19): operation="profile_replace" pid=894 name=/usr/lib/cups/backend/cups-pdf
[ 19.082135] type=1505 audit(1262466730.247:20): operation="profile_replace" pid=894 name=/usr/sbin/cupsd
[ 19.085816] type=1505 audit(1262466730.251:21): operation="profile_replace" pid=895 name=/usr/sbin/tcpdump
[ 19.092782] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
[ 19.234149] intel8x0_measure_ac97_clock: measured 57354 usecs (2759 samples)
[ 19.234154] intel8x0: clocking to 48000
[ 19.925062] ppdev: user-space parallel port driver
[ 20.932912] eth0: Media Link On 100mbps full-duplex
[ 29.304021] eth0: no IPv6 routers present
[ 41.464149] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 41.733268] padlock: VIA PadLock not detected.
[ 229.240649] atkbd.c: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0).
[ 229.240655] atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
[ 229.241123] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 229.242779] psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 4
[ 229.244210] psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1
[ 229.255626] psmouse.c: TouchPad at isa0060/serio2/input0 - driver resynched.
[ 1339.353169] atkbd.c: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0).
[ 1339.353176] atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
[ 1339.354211] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 1339.357376] psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 4
[ 1339.358903] psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1
[ 1339.369496] psmouse.c: TouchPad at isa0060/serio2/input0 - driver resynched.
[ 2629.343061] atkbd.c: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0).
[ 2629.343072] atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
[ 2629.343595] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 2629.346884] psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1
[ 2629.348305] psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1
[ 2629.350573] psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1
[ 2629.352118] psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1
[ 2629.353640] psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1
[ 2629.353645] psmouse.c: issuing reconnect request
[ 2763.014978] pcmcia: Detected deprecated PCMCIA ioctl usage from process: lshw.
[ 2763.014989] pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
[ 2763.014997] pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.Dernière modification par newborn (Le 03/01/2010, à 00:14)
Il vaut mieux mobiliser son intelligence sur des conneries que de mobiliser sa connerie sur des choses intelligentes
Hors ligne
#6 Le 06/01/2010, à 14:38
- newborn
Re : [RÉSOLU] Carte Dlink DWA 610 non reconnue
Up please
Ce probleme est bien alambiqué, je pensais qu'il mettrait l'eau à la bouche à un ubuntero confirmé
Merci de m' aider s'il vous plait
Il vaut mieux mobiliser son intelligence sur des conneries que de mobiliser sa connerie sur des choses intelligentes
Hors ligne
#7 Le 09/01/2010, à 15:56
- newborn
Re : [RÉSOLU] Carte Dlink DWA 610 non reconnue
Bon, apparemment, depuis la derniere mise a jour, tout refonctionne, ma carte est à nouveau reconnue et la connexion se fait automatiquement.Comme avant en somme
Je ne sais pas si mes problemes etaient dus au kernel 2.6.31.14 ou à un probleme logiciel (j'ai juste fais attention aux mises à jour du noyau mais pas assez à celles concernant les applications).
J' ai effectué des test sur un live CD Fedora Core 12 (2.6.31.5-127.fc12.i686) et sur Ubuntu Karmic installé et mis à jour (2.6.31-17).Résultat : carte bien reconnue
Sur un live-CD Ubuntu Karmic (2.6.31-14-generic i686).Résultat : carte non reconnue
J' imagine que mon problème est donc lié au kernel utilisé.
Je vais poster les résultats des commandes de test, si cela peux servir.J' ai également exposé ceci sur Launchpad : https://bugs.launchpad.net/karmic/+bug/493673
Il vaut mieux mobiliser son intelligence sur des conneries que de mobiliser sa connerie sur des choses intelligentes
Hors ligne
#8 Le 09/01/2010, à 16:45
- newborn
Re : [RÉSOLU] Carte Dlink DWA 610 non reconnue
Commandes et résultats des tests :
* Ubuntu Karmic 2.6.31-14
$$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001dfd0000 (usable)
[ 0.000000] BIOS-e820: 000000001dfd0000 - 000000001dfdf000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001dfdf000 - 000000001e000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x1dfd0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFE0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000001dfd0000 (usable)
[ 0.000000] modified: 000000001dfd0000 - 000000001dfdf000 (ACPI data)
[ 0.000000] modified: 000000001dfdf000 - 000000001e000000 (ACPI NVS)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-000000001dfd0000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001dc00000 page 2M
[ 0.000000] 001dc00000 - 001dfd0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1dfd0000 @ 10000-15000
[ 0.000000] RAMDISK: 1da22000 - 1df9f098
[ 0.000000] ACPI: RSDP 000f7380 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 1dfd0000 00030 (v01 A M I OEMRSDT 09000417 MSFT 00000097)
[ 0.000000] ACPI: FACP 1dfd0200 00081 (v02 A M I OEMFACP 09000417 MSFT 00000097)
[ 0.000000] ACPI: DSDT 1dfd03f0 03408 (v01 UW F11_____ 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 1dfdf000 00040
[ 0.000000] ACPI: APIC 1dfd0390 00054 (v01 A M I OEMAPIC 09000417 MSFT 00000097)
[ 0.000000] ACPI: OEMB 1dfdf040 00109 (v01 A M I AMI_OEM 09000417 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 479MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1dfd0000
[ 0.000000] low ram: 0 - 1dfd0000
[ 0.000000] node 0 low ram: 00000000 - 1dfd0000
[ 0.000000] node 0 bootmap 00011000 - 00014bfc
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001dfd0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [001da22000 - 001df9f098] RAMDISK ==> [001da22000 - 001df9f098]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00008a9000 - 00008ac14d] BRK ==> [00008a9000 - 00008ac14d]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001dfd0
[ 0.000000] HighMem 0x0001dfd0 -> 0x0001dfd0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001dfd0
[ 0.000000] On node 0 totalpages: 122719
[ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 928 pages used for memmap
[ 0.000000] Normal zone: 117808 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 1e000000 (gap: 1e000000:e1f80000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c13c2000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121759
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- debian-installer/language=fr console-setup/layoutcode?=fr console-setup/variantcode?=oss
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2456320 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 470512k/491328k available (4565k kernel code, 20208k reserved, 2143k data, 540k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xde7d0000 - 0xff7fe000 ( 528 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xddfd0000 ( 479 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 798.300 MHz processor.
[ 0.000792] Console: colour VGA+ 80x25
[ 0.000799] console [tty0] enabled
[ 0.000900] Calibrating delay loop (skipped), value calculated using timer frequency.. 1596.60 BogoMIPS (lpj=3193200)
[ 0.000942] Security Framework initialized
[ 0.000985] AppArmor: AppArmor initialized
[ 0.001000] Mount-cache hash table entries: 512
[ 0.001224] Initializing cgroup subsys ns
[ 0.001232] Initializing cgroup subsys cpuacct
[ 0.001242] Initializing cgroup subsys memory
[ 0.001258] Initializing cgroup subsys freezer
[ 0.001263] Initializing cgroup subsys net_cls
[ 0.001288] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.001294] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.001302] mce: CPU supports 5 MCE banks
[ 0.001328] Performance Counters: AMD PMU driver.
[ 0.001355] ... version: 0
[ 0.001360] ... bit width: 48
[ 0.001364] ... generic counters: 4
[ 0.001369] ... value mask: 0000ffffffffffff
[ 0.001374] ... max period: 00007fffffffffff
[ 0.001379] ... fixed-purpose counters: 0
[ 0.001384] ... counter mask: 000000000000000f
[ 0.001392] Checking 'hlt' instruction... OK.
[ 0.017518] SMP alternatives: switching to UP code
[ 0.028030] Freeing SMP alternatives: 19k freed
[ 0.028070] ACPI: Core revision 20090521
[ 0.040400] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081238] CPU0: Mobile AMD Sempron(tm) Processor 2800+ stepping 02
[ 0.084001] Brought up 1 CPUs
[ 0.084001] Total of 1 processors activated (1596.60 BogoMIPS).
[ 0.084001] CPU0 attaching NULL sched-domain.
[ 0.084001] Booting paravirtualized kernel on bare hardware
[ 0.084001] regulator: core version 0.5
[ 0.084001] Time: 12:52:49 Date: 01/09/10
[ 0.084001] NET: Registered protocol family 16
[ 0.084001] EISA bus registered
[ 0.084001] ACPI: bus type pci registered
[ 0.084001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 0.084001] PCI: Using configuration type 1 for base access
[ 0.084757] bio: create slab <bio-0> at 0
[ 0.085710] ACPI: EC: Look up EC in DSDT
[ 0.087396] ACPI Warning: Package List length (10A) larger than NumElements count (2), truncated
[ 0.087408] 20090521 dsobject-502
[ 0.093511] ACPI: Interpreter enabled
[ 0.093522] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.093573] ACPI: Using IOAPIC for interrupt routing
[ 0.094183] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 0.095656] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.110708] ACPI: EC: GPE = 0x2, I/O: command/status = 0x66, data = 0x62
[ 0.110714] ACPI: EC: driver started in interrupt mode
[ 0.110868] ACPI Warning: Incorrect checksum in table [OEMB] - 2B, should be 20 20090521 tbutils-246
[ 0.111045] ACPI: No dock devices found.
[ 0.111191] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.111279] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe1ffffff]
[ 0.111417] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.111464] pci 0000:00:02.1: reg 20 io port: [0xc00-0xc1f]
[ 0.111518] pci 0000:00:02.5: reg 20 io port: [0xffa0-0xffaf]
[ 0.111566] pci 0000:00:02.6: reg 10 io port: [0xe400-0xe4ff]
[ 0.111577] pci 0000:00:02.6: reg 14 io port: [0xe000-0xe07f]
[ 0.111616] pci 0000:00:02.6: supports D1 D2
[ 0.111622] pci 0000:00:02.6: PME# supported from D3hot D3cold
[ 0.111630] pci 0000:00:02.6: PME# disabled
[ 0.111669] pci 0000:00:02.7: reg 10 io port: [0xe800-0xe8ff]
[ 0.111679] pci 0000:00:02.7: reg 14 io port: [0xec00-0xec7f]
[ 0.111719] pci 0000:00:02.7: supports D1 D2
[ 0.111724] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.111731] pci 0000:00:02.7: PME# disabled
[ 0.111759] pci 0000:00:03.0: reg 10 32bit mmio: [0xdfffd000-0xdfffdfff]
[ 0.111811] pci 0000:00:03.1: reg 10 32bit mmio: [0xdfffe000-0xdfffefff]
[ 0.111871] pci 0000:00:03.3: reg 10 32bit mmio: [0xdffff000-0xdfffffff]
[ 0.111913] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.111920] pci 0000:00:03.3: PME# disabled
[ 0.111960] pci 0000:00:04.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.111971] pci 0000:00:04.0: reg 14 32bit mmio: [0xdfffc000-0xdfffcfff]
[ 0.112008] pci 0000:00:04.0: reg 30 32bit mmio: [0xdffc0000-0xdffdffff]
[ 0.112028] pci 0000:00:04.0: supports D1 D2
[ 0.112034] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.112042] pci 0000:00:04.0: PME# disabled
[ 0.112080] pci 0000:00:06.0: reg 10 32bit mmio: [0xdfffb800-0xdfffbfff]
[ 0.112091] pci 0000:00:06.0: reg 14 32bit mmio: [0xdfff4000-0xdfff7fff]
[ 0.112131] pci 0000:00:06.0: supports D1 D2
[ 0.112137] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot
[ 0.112145] pci 0000:00:06.0: PME# disabled
[ 0.112184] pci 0000:00:09.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.112205] pci 0000:00:09.0: supports D1 D2
[ 0.112211] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.112219] pci 0000:00:09.0: PME# disabled
[ 0.112256] pci 0000:00:09.1: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.112277] pci 0000:00:09.1: supports D1 D2
[ 0.112283] pci 0000:00:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.112290] pci 0000:00:09.1: PME# disabled
[ 0.112330] pci 0000:00:09.2: reg 10 32bit mmio: [0xdfffa000-0xdfffafff]
[ 0.112374] pci 0000:00:09.2: supports D1 D2
[ 0.112380] pci 0000:00:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.112387] pci 0000:00:09.2: PME# disabled
[ 0.112578] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.112587] pci 0000:01:00.0: reg 14 32bit mmio: [0xdfee0000-0xdfefffff]
[ 0.112597] pci 0000:01:00.0: reg 18 io port: [0xcc00-0xcc7f]
[ 0.112624] pci 0000:01:00.0: supports D1 D2
[ 0.112657] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[ 0.112666] pci 0000:00:01.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
[ 0.112674] pci 0000:00:01.0: bridge 32bit mmio pref: [0xcfd00000-0xdfcfffff]
[ 0.112719] pci_bus 0000:00: on NUMA node 0
[ 0.112728] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.157197] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.157398] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.157593] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.157787] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.157983] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 7 10 11 12 14 15)
[ 0.158180] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 10 11 12 14 15)
[ 0.158377] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.158574] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.160088] SCSI subsystem initialized
[ 0.160215] libata version 3.00 loaded.
[ 0.160374] usbcore: registered new interface driver usbfs
[ 0.160410] usbcore: registered new interface driver hub
[ 0.160461] usbcore: registered new device driver usb
[ 0.160737] ACPI: WMI: Mapper loaded
[ 0.160741] PCI: Using ACPI for IRQ routing
[ 0.161036] Bluetooth: Core ver 2.15
[ 0.161091] NET: Registered protocol family 31
[ 0.161095] Bluetooth: HCI device and connection manager initialized
[ 0.161102] Bluetooth: HCI socket layer initialized
[ 0.161107] NetLabel: Initializing
[ 0.161111] NetLabel: domain hash size = 128
[ 0.161115] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.161146] NetLabel: unlabeled traffic allowed by default
[ 0.164650] pnp: PnP ACPI init
[ 0.164690] ACPI: bus type pnp registered
[ 0.167888] pnp: PnP ACPI: found 10 devices
[ 0.167894] ACPI: ACPI bus type pnp unregistered
[ 0.167902] PnPBIOS: Disabled by ACPI PNP
[ 0.167933] system 00:07: ioport range 0x480-0x48f has been reserved
[ 0.167941] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.167948] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.167956] system 00:07: ioport range 0x880-0x8ff has been reserved
[ 0.167964] system 00:07: ioport range 0xc00-0xc1f has been reserved
[ 0.167973] system 00:07: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.167981] system 00:07: iomem range 0xffe80000-0xffefffff has been reserved
[ 0.167990] system 00:07: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.168017] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.168025] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.168039] system 00:09: iomem range 0x0-0x9ffff could not be reserved
[ 0.168047] system 00:09: iomem range 0xc0000-0xd0fff could not be reserved
[ 0.168055] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 0.168063] system 00:09: iomem range 0x100000-0x1fffffff could not be reserved
[ 0.202911] AppArmor: AppArmor Filesystem Enabled
[ 0.202986] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.202994] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.203004] pci 0000:00:01.0: MEM window: 0xdfe00000-0xdfefffff
[ 0.203013] pci 0000:00:01.0: PREFETCH window: 0xcfd00000-0xdfcfffff
[ 0.203022] pci 0000:00:09.0: CardBus bridge, secondary bus 0000:02
[ 0.203029] pci 0000:00:09.0: IO window: 0x001000-0x0010ff
[ 0.203037] pci 0000:00:09.0: IO window: 0x001400-0x0014ff
[ 0.203045] pci 0000:00:09.0: PREFETCH window: 0x20000000-0x23ffffff
[ 0.203054] pci 0000:00:09.0: MEM window: 0x24000000-0x27ffffff
[ 0.203062] pci 0000:00:09.1: CardBus bridge, secondary bus 0000:06
[ 0.203069] pci 0000:00:09.1: IO window: 0x001800-0x0018ff
[ 0.203076] pci 0000:00:09.1: IO window: 0x001c00-0x001cff
[ 0.203085] pci 0000:00:09.1: PREFETCH window: 0x28000000-0x2bffffff
[ 0.203093] pci 0000:00:09.1: MEM window: 0x2c000000-0x2fffffff
[ 0.203119] alloc irq_desc for 17 on node -1
[ 0.203124] alloc kstat_irqs on node -1
[ 0.203137] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.203151] pci 0000:00:09.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.203163] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.203171] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.203178] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.203185] pci_bus 0000:01: resource 1 mem: [0xdfe00000-0xdfefffff]
[ 0.203192] pci_bus 0000:01: resource 2 pref mem [0xcfd00000-0xdfcfffff]
[ 0.203200] pci_bus 0000:02: resource 0 io: [0x1000-0x10ff]
[ 0.203206] pci_bus 0000:02: resource 1 io: [0x1400-0x14ff]
[ 0.203213] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x23ffffff]
[ 0.203221] pci_bus 0000:02: resource 3 mem: [0x24000000-0x27ffffff]
[ 0.203228] pci_bus 0000:06: resource 0 io: [0x1800-0x18ff]
[ 0.203234] pci_bus 0000:06: resource 1 io: [0x1c00-0x1cff]
[ 0.203241] pci_bus 0000:06: resource 2 pref mem [0x28000000-0x2bffffff]
[ 0.203249] pci_bus 0000:06: resource 3 mem: [0x2c000000-0x2fffffff]
[ 0.203328] NET: Registered protocol family 2
[ 0.203538] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.204168] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.204350] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.204533] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.204539] TCP reno registered
[ 0.204697] NET: Registered protocol family 1
[ 0.204828] Trying to unpack rootfs image as initramfs...
[ 0.703994] Switched to high resolution mode on CPU 0
[ 3.868134] Freeing initrd memory: 5620k freed
[ 3.876599] cpufreq-nforce2: No nForce2 chipset.
[ 3.876655] Scanning for low memory corruption every 60 seconds
[ 3.876872] audit: initializing netlink socket (disabled)
[ 3.876915] type=2000 audit(1263041572.876:1): initialized
[ 3.899444] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 3.902909] VFS: Disk quotas dquot_6.5.2
[ 3.903050] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.904515] fuse init (API version 7.12)
[ 3.904717] msgmni has been set to 930
[ 3.905175] alg: No test for stdrng (krng)
[ 3.905202] io scheduler noop registered
[ 3.905207] io scheduler anticipatory registered
[ 3.905212] io scheduler deadline registered
[ 3.905317] io scheduler cfq registered (default)
[ 3.944052] pci 0000:01:00.0: Boot video device
[ 3.944251] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.944305] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.945092] ACPI: AC Adapter [AC0] (on-line)
[ 3.945236] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.945245] ACPI: Power Button [PWRF]
[ 3.945375] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:05/PNP0C0D:00/input/input1
[ 3.945434] ACPI: Lid Switch [LID]
[ 3.945547] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 3.945557] ACPI: Sleep Button [SLPB]
[ 3.945654] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 3.945661] ACPI: Power Button [PWRB]
[ 3.946007] Marking TSC unstable due to TSC halts in idle
[ 3.946039] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 3.946092] processor LNXCPU:00: registered as cooling_device0
[ 3.949229] thermal LNXTHERM:01: registered as thermal_zone0
[ 3.949248] ACPI: Thermal Zone [THRM] (75 C)
[ 3.949348] isapnp: Scanning for PnP cards...
[ 4.303435] isapnp: No Plug & Play device found
[ 4.306224] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.306828] alloc irq_desc for 18 on node -1
[ 4.306834] alloc kstat_irqs on node -1
[ 4.306850] serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.306861] serial 0000:00:02.6: PCI INT C disabled
[ 4.309149] brd: module loaded
[ 4.310232] loop: module loaded
[ 4.310419] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 4.311730] pata_sis 0000:00:02.5: version 0.5.2
[ 4.312078] scsi0 : pata_sis
[ 4.312291] scsi1 : pata_sis
[ 4.313696] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 4.313704] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 4.314510] Fixed MDIO Bus: probed
[ 4.314595] PPP generic driver version 2.4.2
[ 4.314807] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.314847] alloc irq_desc for 23 on node -1
[ 4.314852] alloc kstat_irqs on node -1
[ 4.314866] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 4.314894] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 4.315011] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 4.315065] ehci_hcd 0000:00:03.3: cache line size of 64 is not supported
[ 4.315093] ehci_hcd 0000:00:03.3: irq 23, io mem 0xdffff000
[ 4.324027] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 4.324196] usb usb1: configuration #1 chosen from 1 choice
[ 4.324273] hub 1-0:1.0: USB hub found
[ 4.324292] hub 1-0:1.0: 6 ports detected
[ 4.324420] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.324460] alloc irq_desc for 20 on node -1
[ 4.324465] alloc kstat_irqs on node -1
[ 4.324477] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.324501] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 4.324573] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 4.324613] ohci_hcd 0000:00:03.0: irq 20, io mem 0xdfffd000
[ 4.351008] ACPI: Battery Slot [BAT0] (battery present)
[ 4.382168] usb usb2: configuration #1 chosen from 1 choice
[ 4.382234] hub 2-0:1.0: USB hub found
[ 4.382252] hub 2-0:1.0: 3 ports detected
[ 4.382350] alloc irq_desc for 21 on node -1
[ 4.382356] alloc kstat_irqs on node -1
[ 4.382367] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.382388] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 4.382473] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 4.382526] ohci_hcd 0000:00:03.1: irq 21, io mem 0xdfffe000
[ 4.438144] usb usb3: configuration #1 chosen from 1 choice
[ 4.438207] hub 3-0:1.0: USB hub found
[ 4.438223] hub 3-0:1.0: 3 ports detected
[ 4.438330] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.438520] PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.443068] i8042.c: Detected active multiplexing controller, rev 1.0.
[ 4.443901] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.443913] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 4.443921] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 4.443929] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 4.443937] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 4.444083] mice: PS/2 mouse device common for all mice
[ 4.444430] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 4.444460] rtc0: alarms up to one month, 114 bytes nvram
[ 4.444697] device-mapper: uevent: version 1.0.3
[ 4.444913] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 4.445074] device-mapper: multipath: version 1.1.0 loaded
[ 4.445080] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.445407] EISA: Probing bus 0 at eisa.0
[ 4.445420] Cannot allocate resource for EISA slot 1
[ 4.445457] EISA: Detected 0 cards.
[ 4.445633] cpuidle: using governor ladder
[ 4.445764] cpuidle: using governor menu
[ 4.446936] TCP cubic registered
[ 4.447346] NET: Registered protocol family 10
[ 4.448388] lo: Disabled Privacy Extensions
[ 4.449122] NET: Registered protocol family 17
[ 4.449163] Bluetooth: L2CAP ver 2.13
[ 4.449167] Bluetooth: L2CAP socket layer initialized
[ 4.449174] Bluetooth: SCO (Voice Link) ver 0.6
[ 4.449178] Bluetooth: SCO socket layer initialized
[ 4.449253] Bluetooth: RFCOMM TTY layer initialized
[ 4.449260] Bluetooth: RFCOMM socket layer initialized
[ 4.449265] Bluetooth: RFCOMM ver 1.11
[ 4.449293] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2800+ processors (1 cpu cores) (version 2.20.00)
[ 4.449372] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x8
[ 4.449379] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x13
[ 4.452160] Using IPI No-Shortcut mode
[ 4.452252] PM: Resume from disk failed.
[ 4.452268] registered taskstats version 1
[ 4.452412] Magic number: 10:255:885
[ 4.452508] rtc_cmos 00:02: setting system clock to 2010-01-09 12:52:53 UTC (1263041573)
[ 4.452512] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.452515] EDD information not available.
[ 4.453302] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 4.476864] ata1.00: ATA-6: FUJITSU MHT2040AT, 0022, max UDMA/100
[ 4.476868] ata1.00: 78140160 sectors, multi 16: LBA
[ 4.476894] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 4.492883] ata1.00: configured for UDMA/33
[ 4.493024] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2040A 0022 PQ: 0 ANSI: 5
[ 4.493176] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.493224] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 4.493276] sd 0:0:0:0: [sda] Write Protect is off
[ 4.493280] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.493307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.493454] sda:
[ 4.648159] ata2.01: NODEV after polling detection
[ 4.657040] ata2.00: ATAPI: QSI DVDRW SDW-041, DU07, max UDMA/33
[ 4.672823] ata2.00: configured for UDMA/33
[ 4.685629] scsi 1:0:0:0: CD-ROM QSI DVDRW SDW-041 DU07 PQ: 0 ANSI: 5
[ 4.690777] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.690781] Uniform CD-ROM driver Revision: 3.20
[ 4.690901] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.690975] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.700022] Clocksource tsc unstable (delta = 247921312 ns)
[ 4.836017] sda1 sda2 < sda5 >
[ 4.907780] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.907802] Freeing unused kernel memory: 540k freed
[ 4.908503] Write protecting the kernel text: 4568k
[ 4.908542] Write protecting the kernel read-only data: 1836k
[ 5.049251] ramzswap: disk size set to 119212 kB
[ 5.095816] Linux agpgart interface v0.103
[ 5.124550] agpgart-amd64 0000:00:00.0: AGP bridge [1039/0760]
[ 5.125885] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xe0000000
[ 5.291838] Adding 119208k swap on /dev/ramzswap0. Priority:100 extents:1 across:119208k SSD
[ 5.311256] alloc irq_desc for 19 on node -1
[ 5.311261] alloc kstat_irqs on node -1
[ 5.311271] ohci1394 0000:00:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.315559] sis900.c: v1.08.10 Apr. 2 2006
[ 5.319663] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 5.319827] acpi device:04: registered as cooling_device1
[ 5.319941] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input6
[ 5.319992] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.364085] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dfffb800-dfffbfff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 5.364412] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.365534] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[ 5.374918] 0000:00:04.0: Using transceiver found at address 1 as default
[ 5.378032] eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 19, 00:03:0d:1c:d4:50
[ 6.265789] xor: automatically using best checksumming function: pIII_sse
[ 6.284006] pIII_sse : 4835.000 MB/sec
[ 6.284010] xor: using function: pIII_sse (4835.000 MB/sec)
[ 6.287842] device-mapper: dm-raid45: initialized v0.2594b
[ 6.636183] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d5325531c57]
[ 6.687396] EXT4-fs (sda1): barriers enabled
[ 6.714134] kjournald2 starting: pid 395, dev sda1:8, commit interval 5 seconds
[ 6.714151] EXT4-fs (sda1): delayed allocation enabled
[ 6.714156] EXT4-fs: file extents enabled
[ 6.719950] EXT4-fs: mballoc enabled
[ 6.719971] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 6.746532] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
[ 6.746539] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
[ 6.746542] EXT4-fs: mballoc: 0 generated and it took 0
[ 6.746545] EXT4-fs: mballoc: 0 preallocated, 0 discarded
[ 8.349026] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 8.448786] ISO 9660 Extensions: RRIP_1991A
[ 8.783011] aufs 2-standalone.tree-30-20090727
[ 9.028160] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 102.386639] Adding 1397612k swap on /dev/sda5. Priority:-1 extents:1 across:1397612k
[ 105.062391] udev: starting version 147
[ 109.688819] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 110.000162] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[ 111.387202] yenta_cardbus 0000:00:09.0: CardBus bridge found [1734:106c]
[ 111.387219] yenta_cardbus 0000:00:09.0: O2: res at 0x94/0xD4: 00/ea
[ 111.387223] yenta_cardbus 0000:00:09.0: O2: enabling read prefetch/write burst
[ 111.512742] yenta_cardbus 0000:00:09.0: ISA IRQ mask 0x0000, PCI irq 17
[ 111.512748] yenta_cardbus 0000:00:09.0: Socket status: 00000000
[ 111.512936] yenta_cardbus 0000:00:09.1: CardBus bridge found [1734:106c]
[ 111.513848] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x6eb1, caps: 0xa04711/0x40a
[ 111.554491] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
[ 111.640864] yenta_cardbus 0000:00:09.1: ISA IRQ mask 0x0000, PCI irq 17
[ 111.640869] yenta_cardbus 0000:00:09.1: Socket status: 00000000
[ 115.065460] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 117.366402] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 117.368093] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 117.368755] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 117.368811] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 117.369500] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 117.390226] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
[ 117.391874] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[ 117.392597] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 117.392656] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 117.393363] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 120.501203] eth0: Media Link Off
[ 120.501318] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 120.969202] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 121.800030] intel8x0_measure_ac97_clock: measured 55391 usecs (2664 samples)
[ 121.800036] intel8x0: clocking to 48000
[ 128.551622] lp: driver loaded but no devices found
[ 129.738590] ppdev: user-space parallel port driver
[ 367.456186] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 1593.486494] pcmcia: Detected deprecated PCMCIA ioctl usage from process: lshw.
[ 1593.486500] pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
[ 1593.486504] pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
$$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:03:0d:1c:d4:50
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
Interruption:19 Adresse de base:0xd800
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:4 erreurs:0 :0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:240 (240.0 B) Octets transmis:240 (240.0 B)
$$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
$$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=9.10
DISTRIB_CODENAME=karmic
DISTRIB_DESCRIPTION="Ubuntu 9.10"
$$ sudo lshw -C network
*-network
description: Ethernet interface
product: SiS900 PCI Fast Ethernet
vendor: Silicon Integrated Systems [SiS]
physical id: 4
bus info: pci@0000:00:04.0
logical name: eth0
version: 91
serial: 00:03:0d:1c:d4:50
size: 10MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sis900 driverversion=v1.08.10 Apr. 2 2006 duplex=half latency=64 link=no maxlatency=11 mingnt=52 multicast=yes port=MII speed=10MB/s
resources: irq:19 ioport:d800(size=256) memory:dfffc000-dfffcfff memory:dffc0000-dffdffff(prefetchable)
$$ lsmod
Module Size Used by
binfmt_misc 8356 1
ppdev 6688 0
lp 8964 0
parport 35340 2 ppdev,lp
snd_intel8x0 30168 2
snd_ac97_codec 101216 1 snd_intel8x0
ac97_bus 1532 1 snd_ac97_codec
snd_pcm_oss 37920 0
snd_mixer_oss 16028 1 snd_pcm_oss
snd_pcm 75296 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 2656 0
snd_seq_oss 28576 0
snd_seq_midi 6432 0
snd_rawmidi 22208 1 snd_seq_midi
snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi
dm_crypt 12928 0
pcmcia 36808 0
iptable_filter 3100 0
snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
ip_tables 11692 1 iptable_filter
snd_timer 22276 2 snd_pcm,snd_seq
x_tables 16544 1 ip_tables
snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
joydev 10272 0
snd 59204 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
yenta_socket 24200 2
soundcore 7264 1 snd
psmouse 56180 0
rsrc_nonstatic 11644 1 yenta_socket
i2c_sis96x 3904 0
shpchp 32272 0
k8temp 4188 0
snd_page_alloc 9156 2 snd_intel8x0,snd_pcm
pcmcia_core 35792 3 pcmcia,yenta_socket,rsrc_nonstatic
serio_raw 5280 0
squashfs 22912 1
aufs 149420 1
nls_cp437 5372 1
isofs 31620 1
dm_raid45 84228 0
xor 15620 1 dm_raid45
video 19380 0
output 2780 1 video
sis900 19932 0
mii 5212 1 sis900
ohci1394 29900 0
ieee1394 86596 1 ohci1394
sis_agp 6972 0
amd64_agp 9796 1
agpgart 34988 2 sis_agp,amd64_agp
ramzswap 8880 1
xvmalloc 5180 1 ramzswap
lzo_decompress 2620 1 ramzswap
lzo_compress 2300 1 ramzswap
$$ lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
00:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
00:09.0 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
00:09.1 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
00:09.2 System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter
$$ lspci -nn | grep -i net
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 91)
$$ lspcmcia -vv
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:00:09.0)
Configuration: state: on ready: unknown
--none--
--none--
Socket 1 Bridge: [yenta_cardbus] (bus ID: 0000:00:09.1)
Configuration: state: on ready: unknown
--none--
--none--
$$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
$$ cat /etc/network/interfaces
auto lo
iface lo inet loopback
$$ nm-tool
NetworkManager Tool
State: disconnected
- Device: eth0 -----------------------------------------------------------------
Type: Wired
Driver: sis900
State: unavailable
Default: no
HW Address: 00:03:0D:1C:D4:50
Capabilities:
Carrier Detect: yes
Speed: 10 Mb/s
Wired Properties
Carrier: off
$$ sudo iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
$$ uname -rm
2.6.31-14-generic i686J' ai tenté "d' aérer" un peu tout ca...Le prompt est égal à $$ et le résultat de chaque commande est suivi de trois lignes blanches (si vous savez utilisez les regex, il vous sera bien plus facile pour vous situer).
Dernière modification par newborn (Le 09/01/2010, à 16:57)
Il vaut mieux mobiliser son intelligence sur des conneries que de mobiliser sa connerie sur des choses intelligentes
Hors ligne
#9 Le 09/01/2010, à 16:53
- newborn
Re : [RÉSOLU] Carte Dlink DWA 610 non reconnue
Commandes et résultats de tests
* Ubuntu Karmic 2.6.31-17
Ubuntu_Karmic_2.6.31-17
$$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-17-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 (Ubuntu 2.6.31-17.54-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001dfd0000 (usable)
[ 0.000000] BIOS-e820: 000000001dfd0000 - 000000001dfdf000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001dfdf000 - 000000001e000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x1dfd0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFE0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000001dfd0000 (usable)
[ 0.000000] modified: 000000001dfd0000 - 000000001dfdf000 (ACPI data)
[ 0.000000] modified: 000000001dfdf000 - 000000001e000000 (ACPI NVS)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-000000001dfd0000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001dc00000 page 2M
[ 0.000000] 001dc00000 - 001dfd0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1dfd0000 @ 10000-15000
[ 0.000000] RAMDISK: 16083000 - 1681bddf
[ 0.000000] ACPI: RSDP 000f7380 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 1dfd0000 00030 (v01 A M I OEMRSDT 09000417 MSFT 00000097)
[ 0.000000] ACPI: FACP 1dfd0200 00081 (v02 A M I OEMFACP 09000417 MSFT 00000097)
[ 0.000000] ACPI: DSDT 1dfd03f0 03408 (v01 UW F11_____ 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 1dfdf000 00040
[ 0.000000] ACPI: APIC 1dfd0390 00054 (v01 A M I OEMAPIC 09000417 MSFT 00000097)
[ 0.000000] ACPI: OEMB 1dfdf040 00109 (v01 A M I AMI_OEM 09000417 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 479MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1dfd0000
[ 0.000000] low ram: 0 - 1dfd0000
[ 0.000000] node 0 low ram: 00000000 - 1dfd0000
[ 0.000000] node 0 bootmap 00011000 - 00014bfc
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001dfd0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [0016083000 - 001681bddf] RAMDISK ==> [0016083000 - 001681bddf]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00008a9000 - 00008ac14d] BRK ==> [00008a9000 - 00008ac14d]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001dfd0
[ 0.000000] HighMem 0x0001dfd0 -> 0x0001dfd0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001dfd0
[ 0.000000] On node 0 totalpages: 122719
[ 0.000000] free_area_init_node: node 0, pgdat c0784960, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 928 pages used for memmap
[ 0.000000] Normal zone: 117808 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 1e000000 (gap: 1e000000:e1f80000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c13c2000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121759
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-17-generic root=UUID=a76613dd-5918-48f5-9cb2-bf6d9e803423 ro quiet splash
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2456320 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 468336k/491328k available (4566k kernel code, 22364k reserved, 2142k data, 540k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xde7d0000 - 0xff7fe000 ( 528 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xddfd0000 ( 479 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575a64 - 0xc078d408 (2142 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575a64 (4566 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 798.177 MHz processor.
[ 0.000013] spurious 8259A interrupt: IRQ7.
[ 0.000802] Console: colour VGA+ 80x25
[ 0.000808] console [tty0] enabled
[ 0.000908] Calibrating delay loop (skipped), value calculated using timer frequency.. 1596.35 BogoMIPS (lpj=3192708)
[ 0.000949] Security Framework initialized
[ 0.000991] AppArmor: AppArmor initialized
[ 0.001006] Mount-cache hash table entries: 512
[ 0.001226] Initializing cgroup subsys ns
[ 0.001235] Initializing cgroup subsys cpuacct
[ 0.001244] Initializing cgroup subsys memory
[ 0.001259] Initializing cgroup subsys freezer
[ 0.001264] Initializing cgroup subsys net_cls
[ 0.001288] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.001295] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.001302] mce: CPU supports 5 MCE banks
[ 0.001328] Performance Counters: AMD PMU driver.
[ 0.001355] ... version: 0
[ 0.001359] ... bit width: 48
[ 0.001364] ... generic counters: 4
[ 0.001369] ... value mask: 0000ffffffffffff
[ 0.001374] ... max period: 00007fffffffffff
[ 0.001379] ... fixed-purpose counters: 0
[ 0.001383] ... counter mask: 000000000000000f
[ 0.001392] Checking 'hlt' instruction... OK.
[ 0.017486] SMP alternatives: switching to UP code
[ 0.028030] Freeing SMP alternatives: 19k freed
[ 0.028072] ACPI: Core revision 20090521
[ 0.040399] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081306] CPU0: Mobile AMD Sempron(tm) Processor 2800+ stepping 02
[ 0.084001] Brought up 1 CPUs
[ 0.084001] Total of 1 processors activated (1596.35 BogoMIPS).
[ 0.084001] CPU0 attaching NULL sched-domain.
[ 0.084001] Booting paravirtualized kernel on bare hardware
[ 0.084001] regulator: core version 0.5
[ 0.084001] Time: 13:28:47 Date: 01/09/10
[ 0.084001] NET: Registered protocol family 16
[ 0.084001] EISA bus registered
[ 0.084001] ACPI: bus type pci registered
[ 0.084001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 0.084001] PCI: Using configuration type 1 for base access
[ 0.084838] bio: create slab <bio-0> at 0
[ 0.085770] ACPI: EC: Look up EC in DSDT
[ 0.087462] ACPI Warning: Package List length (10A) larger than NumElements count (2), truncated
[ 0.087475] 20090521 dsobject-502
[ 0.093623] ACPI: Interpreter enabled
[ 0.093634] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.093684] ACPI: Using IOAPIC for interrupt routing
[ 0.094298] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 0.096009] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.105837] ACPI: EC: GPE = 0x2, I/O: command/status = 0x66, data = 0x62
[ 0.105843] ACPI: EC: driver started in interrupt mode
[ 0.105992] ACPI Warning: Incorrect checksum in table [OEMB] - 2B, should be 20 20090521 tbutils-246
[ 0.106181] ACPI: No dock devices found.
[ 0.106329] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.106412] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe1ffffff]
[ 0.106549] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.106595] pci 0000:00:02.1: reg 20 io port: [0xc00-0xc1f]
[ 0.106650] pci 0000:00:02.5: reg 20 io port: [0xffa0-0xffaf]
[ 0.106698] pci 0000:00:02.6: reg 10 io port: [0xe400-0xe4ff]
[ 0.106709] pci 0000:00:02.6: reg 14 io port: [0xe000-0xe07f]
[ 0.106748] pci 0000:00:02.6: supports D1 D2
[ 0.106755] pci 0000:00:02.6: PME# supported from D3hot D3cold
[ 0.106762] pci 0000:00:02.6: PME# disabled
[ 0.106801] pci 0000:00:02.7: reg 10 io port: [0xe800-0xe8ff]
[ 0.106812] pci 0000:00:02.7: reg 14 io port: [0xec00-0xec7f]
[ 0.106851] pci 0000:00:02.7: supports D1 D2
[ 0.106857] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.106864] pci 0000:00:02.7: PME# disabled
[ 0.106891] pci 0000:00:03.0: reg 10 32bit mmio: [0xdfffd000-0xdfffdfff]
[ 0.106942] pci 0000:00:03.1: reg 10 32bit mmio: [0xdfffe000-0xdfffefff]
[ 0.107003] pci 0000:00:03.3: reg 10 32bit mmio: [0xdffff000-0xdfffffff]
[ 0.107044] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.107051] pci 0000:00:03.3: PME# disabled
[ 0.107091] pci 0000:00:04.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.107102] pci 0000:00:04.0: reg 14 32bit mmio: [0xdfffc000-0xdfffcfff]
[ 0.107128] pci 0000:00:04.0: reg 30 32bit mmio: [0xdffc0000-0xdffdffff]
[ 0.107149] pci 0000:00:04.0: supports D1 D2
[ 0.107154] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.107162] pci 0000:00:04.0: PME# disabled
[ 0.107199] pci 0000:00:06.0: reg 10 32bit mmio: [0xdfffb800-0xdfffbfff]
[ 0.107210] pci 0000:00:06.0: reg 14 32bit mmio: [0xdfff4000-0xdfff7fff]
[ 0.107250] pci 0000:00:06.0: supports D1 D2
[ 0.107256] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot
[ 0.107263] pci 0000:00:06.0: PME# disabled
[ 0.107303] pci 0000:00:09.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.107324] pci 0000:00:09.0: supports D1 D2
[ 0.107330] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.107337] pci 0000:00:09.0: PME# disabled
[ 0.107374] pci 0000:00:09.1: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.107396] pci 0000:00:09.1: supports D1 D2
[ 0.107401] pci 0000:00:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.107409] pci 0000:00:09.1: PME# disabled
[ 0.107448] pci 0000:00:09.2: reg 10 32bit mmio: [0xdfffa000-0xdfffafff]
[ 0.107493] pci 0000:00:09.2: supports D1 D2
[ 0.107498] pci 0000:00:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.107506] pci 0000:00:09.2: PME# disabled
[ 0.107693] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.107703] pci 0000:01:00.0: reg 14 32bit mmio: [0xdfee0000-0xdfefffff]
[ 0.107713] pci 0000:01:00.0: reg 18 io port: [0xcc00-0xcc7f]
[ 0.107740] pci 0000:01:00.0: supports D1 D2
[ 0.107773] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[ 0.107781] pci 0000:00:01.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
[ 0.107790] pci 0000:00:01.0: bridge 32bit mmio pref: [0xcfd00000-0xdfcfffff]
[ 0.107835] pci_bus 0000:00: on NUMA node 0
[ 0.107844] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.157211] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.157426] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.157633] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.157839] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.158045] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 7 10 11 12 14 15)
[ 0.158255] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 10 11 12 14 15)
[ 0.158462] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.158671] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.160173] SCSI subsystem initialized
[ 0.160301] libata version 3.00 loaded.
[ 0.160459] usbcore: registered new interface driver usbfs
[ 0.160494] usbcore: registered new interface driver hub
[ 0.160544] usbcore: registered new device driver usb
[ 0.160813] ACPI: WMI: Mapper loaded
[ 0.160818] PCI: Using ACPI for IRQ routing
[ 0.161101] Bluetooth: Core ver 2.15
[ 0.161154] NET: Registered protocol family 31
[ 0.161159] Bluetooth: HCI device and connection manager initialized
[ 0.161166] Bluetooth: HCI socket layer initialized
[ 0.161171] NetLabel: Initializing
[ 0.161175] NetLabel: domain hash size = 128
[ 0.161180] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.161210] NetLabel: unlabeled traffic allowed by default
[ 0.164698] pnp: PnP ACPI init
[ 0.164741] ACPI: bus type pnp registered
[ 0.167927] pnp: PnP ACPI: found 10 devices
[ 0.167933] ACPI: ACPI bus type pnp unregistered
[ 0.167941] PnPBIOS: Disabled by ACPI PNP
[ 0.167969] system 00:07: ioport range 0x480-0x48f has been reserved
[ 0.167978] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.167985] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.167993] system 00:07: ioport range 0x880-0x8ff has been reserved
[ 0.168015] system 00:07: ioport range 0xc00-0xc1f has been reserved
[ 0.168025] system 00:07: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.168034] system 00:07: iomem range 0xffe80000-0xffefffff has been reserved
[ 0.168042] system 00:07: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.168057] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.168065] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.168087] system 00:09: iomem range 0x0-0x9ffff could not be reserved
[ 0.168096] system 00:09: iomem range 0xc0000-0xd0fff could not be reserved
[ 0.168104] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 0.168112] system 00:09: iomem range 0x100000-0x1fffffff could not be reserved
[ 0.202933] AppArmor: AppArmor Filesystem Enabled
[ 0.203008] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.203015] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.203024] pci 0000:00:01.0: MEM window: 0xdfe00000-0xdfefffff
[ 0.203033] pci 0000:00:01.0: PREFETCH window: 0xcfd00000-0xdfcfffff
[ 0.203043] pci 0000:00:09.0: CardBus bridge, secondary bus 0000:02
[ 0.203050] pci 0000:00:09.0: IO window: 0x001000-0x0010ff
[ 0.203058] pci 0000:00:09.0: IO window: 0x001400-0x0014ff
[ 0.203066] pci 0000:00:09.0: PREFETCH window: 0x20000000-0x23ffffff
[ 0.203074] pci 0000:00:09.0: MEM window: 0x24000000-0x27ffffff
[ 0.203082] pci 0000:00:09.1: CardBus bridge, secondary bus 0000:06
[ 0.203088] pci 0000:00:09.1: IO window: 0x001800-0x0018ff
[ 0.203096] pci 0000:00:09.1: IO window: 0x001c00-0x001cff
[ 0.203104] pci 0000:00:09.1: PREFETCH window: 0x28000000-0x2bffffff
[ 0.203112] pci 0000:00:09.1: MEM window: 0x2c000000-0x2fffffff
[ 0.203139] alloc irq_desc for 17 on node -1
[ 0.203145] alloc kstat_irqs on node -1
[ 0.203158] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.203172] pci 0000:00:09.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.203185] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.203192] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.203200] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.203206] pci_bus 0000:01: resource 1 mem: [0xdfe00000-0xdfefffff]
[ 0.203214] pci_bus 0000:01: resource 2 pref mem [0xcfd00000-0xdfcfffff]
[ 0.203221] pci_bus 0000:02: resource 0 io: [0x1000-0x10ff]
[ 0.203228] pci_bus 0000:02: resource 1 io: [0x1400-0x14ff]
[ 0.203235] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x23ffffff]
[ 0.203242] pci_bus 0000:02: resource 3 mem: [0x24000000-0x27ffffff]
[ 0.203249] pci_bus 0000:06: resource 0 io: [0x1800-0x18ff]
[ 0.203256] pci_bus 0000:06: resource 1 io: [0x1c00-0x1cff]
[ 0.203263] pci_bus 0000:06: resource 2 pref mem [0x28000000-0x2bffffff]
[ 0.203270] pci_bus 0000:06: resource 3 mem: [0x2c000000-0x2fffffff]
[ 0.203349] NET: Registered protocol family 2
[ 0.203559] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.204199] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.204380] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.204563] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.204569] TCP reno registered
[ 0.204732] NET: Registered protocol family 1
[ 0.204857] Trying to unpack rootfs image as initramfs...
[ 0.704083] Switched to high resolution mode on CPU 0
[ 0.743433] Freeing initrd memory: 7779k freed
[ 0.754931] cpufreq-nforce2: No nForce2 chipset.
[ 0.754987] Scanning for low memory corruption every 60 seconds
[ 0.755205] audit: initializing netlink socket (disabled)
[ 0.755248] type=2000 audit(1263043727.752:1): initialized
[ 0.777788] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.780990] VFS: Disk quotas dquot_6.5.2
[ 0.781117] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.782326] fuse init (API version 7.12)
[ 0.782505] msgmni has been set to 930
[ 0.782943] alg: No test for stdrng (krng)
[ 0.782969] io scheduler noop registered
[ 0.782974] io scheduler anticipatory registered
[ 0.782979] io scheduler deadline registered
[ 0.783077] io scheduler cfq registered (default)
[ 0.824053] pci 0000:01:00.0: Boot video device
[ 0.824244] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.824296] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.825071] ACPI: AC Adapter [AC0] (on-line)
[ 0.825207] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.825215] ACPI: Power Button [PWRF]
[ 0.825336] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:05/PNP0C0D:00/input/input1
[ 0.825397] ACPI: Lid Switch [LID]
[ 0.825501] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.825510] ACPI: Sleep Button [SLPB]
[ 0.825602] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 0.825609] ACPI: Power Button [PWRB]
[ 0.825955] Marking TSC unstable due to TSC halts in idle
[ 0.825986] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.826036] processor LNXCPU:00: registered as cooling_device0
[ 0.829498] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.829515] ACPI: Thermal Zone [THRM] (75 C)
[ 0.829606] isapnp: Scanning for PnP cards...
[ 1.183605] isapnp: No Plug & Play device found
[ 1.186311] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.186894] alloc irq_desc for 18 on node -1
[ 1.186900] alloc kstat_irqs on node -1
[ 1.186915] serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.186926] serial 0000:00:02.6: PCI INT C disabled
[ 1.189188] brd: module loaded
[ 1.190278] loop: module loaded
[ 1.190454] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.191778] pata_sis 0000:00:02.5: version 0.5.2
[ 1.192130] scsi0 : pata_sis
[ 1.192469] scsi1 : pata_sis
[ 1.193834] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.193842] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.194603] Fixed MDIO Bus: probed
[ 1.194704] PPP generic driver version 2.4.2
[ 1.194916] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.194955] alloc irq_desc for 23 on node -1
[ 1.194961] alloc kstat_irqs on node -1
[ 1.194975] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.195004] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 1.195115] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 1.195171] ehci_hcd 0000:00:03.3: cache line size of 64 is not supported
[ 1.195199] ehci_hcd 0000:00:03.3: irq 23, io mem 0xdffff000
[ 1.204020] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 1.204179] usb usb1: configuration #1 chosen from 1 choice
[ 1.204252] hub 1-0:1.0: USB hub found
[ 1.204270] hub 1-0:1.0: 6 ports detected
[ 1.204392] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.204431] alloc irq_desc for 20 on node -1
[ 1.204437] alloc kstat_irqs on node -1
[ 1.204450] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.204475] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 1.204547] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 1.204590] ohci_hcd 0000:00:03.0: irq 20, io mem 0xdfffd000
[ 1.230907] ACPI: Battery Slot [BAT0] (battery present)
[ 1.262158] usb usb2: configuration #1 chosen from 1 choice
[ 1.262219] hub 2-0:1.0: USB hub found
[ 1.262254] hub 2-0:1.0: 3 ports detected
[ 1.262352] alloc irq_desc for 21 on node -1
[ 1.262358] alloc kstat_irqs on node -1
[ 1.262370] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.262390] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 1.262464] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 1.262501] ohci_hcd 0000:00:03.1: irq 21, io mem 0xdfffe000
[ 1.318133] usb usb3: configuration #1 chosen from 1 choice
[ 1.318192] hub 3-0:1.0: USB hub found
[ 1.318209] hub 3-0:1.0: 3 ports detected
[ 1.318310] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.318493] PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.323038] i8042.c: Detected active multiplexing controller, rev 1.0.
[ 1.323920] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.323933] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.323940] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.323948] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.323955] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.324087] mice: PS/2 mouse device common for all mice
[ 1.324409] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.324437] rtc0: alarms up to one month, 114 bytes nvram
[ 1.324660] device-mapper: uevent: version 1.0.3
[ 1.324857] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.325006] device-mapper: multipath: version 1.1.0 loaded
[ 1.325013] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.325290] EISA: Probing bus 0 at eisa.0
[ 1.325302] Cannot allocate resource for EISA slot 1
[ 1.325340] EISA: Detected 0 cards.
[ 1.325515] cpuidle: using governor ladder
[ 1.325639] cpuidle: using governor menu
[ 1.326792] TCP cubic registered
[ 1.327141] NET: Registered protocol family 10
[ 1.328150] lo: Disabled Privacy Extensions
[ 1.328880] NET: Registered protocol family 17
[ 1.328920] Bluetooth: L2CAP ver 2.13
[ 1.328924] Bluetooth: L2CAP socket layer initialized
[ 1.328931] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.328935] Bluetooth: SCO socket layer initialized
[ 1.329024] Bluetooth: RFCOMM TTY layer initialized
[ 1.329032] Bluetooth: RFCOMM socket layer initialized
[ 1.329036] Bluetooth: RFCOMM ver 1.11
[ 1.329065] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2800+ processors (1 cpu cores) (version 2.20.00)
[ 1.329146] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x8
[ 1.329153] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x13
[ 1.331941] Using IPI No-Shortcut mode
[ 1.332064] PM: Resume from disk failed.
[ 1.332085] registered taskstats version 1
[ 1.332230] Magic number: 10:946:482
[ 1.332324] rtc_cmos 00:02: setting system clock to 2010-01-09 13:28:48 UTC (1263043728)
[ 1.332329] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.332331] EDD information not available.
[ 1.332658] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.372466] ata1.00: ATA-6: FUJITSU MHT2040AT, 0022, max UDMA/100
[ 1.372470] ata1.00: 78140160 sectors, multi 16: LBA
[ 1.372496] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 1.404487] ata1.00: configured for UDMA/33
[ 1.404628] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2040A 0022 PQ: 0 ANSI: 5
[ 1.404776] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.404825] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.404877] sd 0:0:0:0: [sda] Write Protect is off
[ 1.404881] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.404907] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.405049] sda: sda1 sda2 < sda5 >
[ 1.455826] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.560162] ata2.01: NODEV after polling detection
[ 1.568427] ata2.00: ATAPI: QSI DVDRW SDW-041, DU07, max UDMA/33
[ 1.584442] ata2.00: configured for UDMA/33
[ 1.588338] scsi 1:0:0:0: CD-ROM QSI DVDRW SDW-041 DU07 PQ: 0 ANSI: 5
[ 1.594385] sr0: scsi3-mmc drive: 12x/24x writer cd/rw xa/form2 cdda tray
[ 1.594389] Uniform CD-ROM driver Revision: 3.20
[ 1.594486] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.594556] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.594586] Freeing unused kernel memory: 540k freed
[ 1.595224] Write protecting the kernel text: 4568k
[ 1.595263] Write protecting the kernel read-only data: 1836k
[ 1.700029] Clocksource tsc unstable (delta = 368268163 ns)
[ 1.871807] alloc irq_desc for 19 on node -1
[ 1.871814] alloc kstat_irqs on node -1
[ 1.871824] ohci1394 0000:00:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.893605] sis900.c: v1.08.10 Apr. 2 2006
[ 1.924713] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dfffb800-dfffbfff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 1.924919] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.926043] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[ 1.935438] 0000:00:04.0: Using transceiver found at address 1 as default
[ 1.970742] Linux agpgart interface v0.103
[ 1.977860] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 1.978029] acpi device:04: registered as cooling_device1
[ 1.978145] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input6
[ 1.978191] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 2.004361] eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 19, 00:03:0d:1c:d4:50
[ 2.004916] agpgart-amd64 0000:00:00.0: AGP bridge [1039/0760]
[ 2.006318] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xe0000000
[ 3.196763] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d5325531c57]
[ 3.284171] PM: Starting manual resume from disk
[ 3.284178] PM: Resume from partition 8:5
[ 3.284181] PM: Checking hibernation image.
[ 3.284517] PM: Resume from disk failed.
[ 3.321829] EXT4-fs (sda1): barriers enabled
[ 3.348130] kjournald2 starting: pid 356, dev sda1:8, commit interval 5 seconds
[ 3.348150] EXT4-fs (sda1): delayed allocation enabled
[ 3.348154] EXT4-fs: file extents enabled
[ 3.354255] EXT4-fs: mballoc enabled
[ 3.354275] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 4.602203] type=1505 audit(1263043731.768:2): operation="profile_load" pid=383 name=/usr/share/gdm/guest-session/Xsession
[ 4.606484] type=1505 audit(1263043731.771:3): operation="profile_load" pid=384 name=/sbin/dhclient3
[ 4.606854] type=1505 audit(1263043731.771:4): operation="profile_load" pid=384 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 4.607064] type=1505 audit(1263043731.771:5): operation="profile_load" pid=384 name=/usr/lib/connman/scripts/dhclient-script
[ 4.700571] type=1505 audit(1263043731.867:6): operation="profile_load" pid=385 name=/usr/bin/evince
[ 4.707017] type=1505 audit(1263043731.871:7): operation="profile_load" pid=385 name=/usr/bin/evince-previewer
[ 4.710964] type=1505 audit(1263043731.875:8): operation="profile_load" pid=385 name=/usr/bin/evince-thumbnailer
[ 4.726820] type=1505 audit(1263043731.891:9): operation="profile_load" pid=387 name=/usr/lib/cups/backend/cups-pdf
[ 19.274986] udev: starting version 147
[ 19.296999] Adding 1397612k swap on /dev/sda5. Priority:-1 extents:1 across:1397612k
[ 20.296941] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[ 20.361906] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 20.628417] yenta_cardbus 0000:00:09.0: CardBus bridge found [1734:106c]
[ 20.628438] yenta_cardbus 0000:00:09.0: O2: res at 0x94/0xD4: 00/ea
[ 20.628442] yenta_cardbus 0000:00:09.0: O2: enabling read prefetch/write burst
[ 20.655487] lp: driver loaded but no devices found
[ 20.758158] yenta_cardbus 0000:00:09.0: ISA IRQ mask 0x0ab8, PCI irq 17
[ 20.758164] yenta_cardbus 0000:00:09.0: Socket status: 30000820
[ 20.758630] yenta_cardbus 0000:00:09.1: CardBus bridge found [1734:106c]
[ 20.811920] EXT4-fs (sda1): internal journal on sda1:8
[ 20.885057] yenta_cardbus 0000:00:09.1: ISA IRQ mask 0x0ab8, PCI irq 17
[ 20.885063] yenta_cardbus 0000:00:09.1: Socket status: 30000006
[ 20.915284] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.024447] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 21.026093] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 21.026756] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 21.026811] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 21.027500] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 21.291154] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 21.392780] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 21.392825] pci 0000:02:00.0: reg 10 32bit mmio: [0xffff8000-0xffffffff]
[ 21.447052] eth0: Media Link Off
[ 21.447160] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.501260] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x6eb1, caps: 0xa04711/0x40a
[ 21.567666] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
[ 21.669021] cfg80211: Calling CRDA to update world regulatory domain
[ 21.672911] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
[ 21.674604] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[ 21.675268] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 21.675324] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 21.676035] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 21.718350] __ratelimit: 6 callbacks suppressed
[ 21.718356] type=1505 audit(1263043748.883:12): operation="profile_replace" pid=903 name=/usr/share/gdm/guest-session/Xsession
[ 21.720857] type=1505 audit(1263043748.887:13): operation="profile_replace" pid=904 name=/sbin/dhclient3
[ 21.721240] type=1505 audit(1263043748.887:14): operation="profile_replace" pid=904 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 21.721452] type=1505 audit(1263043748.887:15): operation="profile_replace" pid=904 name=/usr/lib/connman/scripts/dhclient-script
[ 21.731297] type=1505 audit(1263043748.895:16): operation="profile_replace" pid=905 name=/usr/bin/evince
[ 21.738997] type=1505 audit(1263043748.903:17): operation="profile_replace" pid=905 name=/usr/bin/evince-previewer
[ 21.756555] type=1505 audit(1263043748.923:18): operation="profile_replace" pid=905 name=/usr/bin/evince-thumbnailer
[ 21.763617] type=1505 audit(1263043748.927:19): operation="profile_replace" pid=911 name=/usr/lib/cups/backend/cups-pdf
[ 21.764134] type=1505 audit(1263043748.931:20): operation="profile_replace" pid=911 name=/usr/sbin/cupsd
[ 21.766670] type=1505 audit(1263043748.931:21): operation="profile_replace" pid=912 name=/usr/sbin/tcpdump
[ 21.820669] cfg80211: World regulatory domain updated:
[ 21.820675] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 21.820680] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.820684] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 21.820688] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 21.820691] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.820695] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.026558] rt61pci 0000:02:00.0: enabling device (0000 -> 0002)
[ 22.026572] rt61pci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 22.026580] rt61pci 0000:02:00.0: setting latency timer to 64
[ 22.124048] intel8x0_measure_ac97_clock: measured 55474 usecs (2668 samples)
[ 22.124054] intel8x0: clocking to 48000
[ 22.191172] phy0: Selected rate control algorithm 'minstrel'
[ 22.192091] Registered led device: rt61pci-phy0::radio
[ 22.192114] Registered led device: rt61pci-phy0::assoc
[ 22.428985] ppdev: user-space parallel port driver
[ 22.472720] rt61pci 0000:02:00.0: firmware: requesting rt2561.bin
[ 22.649273] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.732163] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 51.517521] padlock: VIA PadLock not detected.
[ 58.900100] wlan0: authenticate with AP 00:25:15:51:4a:7c
[ 58.909668] wlan0: authenticated
[ 58.909677] wlan0: associate with AP 00:25:15:51:4a:7c
[ 58.920021] wlan0: RX AssocResp from 00:25:15:51:4a:7c (capab=0x411 status=0 aid=1)
[ 58.920028] wlan0: associated
[ 58.920751] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 69.752044] wlan0: no IPv6 routers present
[ 89.124584] wlan0: disassociating by local choice (reason=3)
[ 98.284302] wlan0: authenticate with AP 00:25:15:51:4a:7c
[ 98.288383] wlan0: authenticated
[ 98.288395] wlan0: associate with AP 00:25:15:51:4a:7c
[ 98.291756] wlan0: RX AssocResp from 00:25:15:51:4a:7c (capab=0x411 status=0 aid=1)
[ 98.291767] wlan0: associated
[ 99.326902] wlan0: disassociating by local choice (reason=3)
[ 110.765310] wlan0: direct probe to AP 00:25:15:51:4a:7c try 1
[ 110.964165] wlan0: direct probe to AP 00:25:15:51:4a:7c try 2
[ 110.966500] wlan0 direct probe responded
[ 110.966507] wlan0: authenticate with AP 00:25:15:51:4a:7c
[ 110.968831] wlan0: authenticated
[ 110.968837] wlan0: associate with AP 00:25:15:51:4a:7c
[ 110.971212] wlan0: RX AssocResp from 00:25:15:51:4a:7c (capab=0x411 status=0 aid=1)
[ 110.971219] wlan0: associated
[ 1809.456149] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 1809.591027] usb 1-2: configuration #1 chosen from 1 choice
[ 1809.743828] Initializing USB Mass Storage driver...
[ 1809.746438] scsi2 : SCSI emulation for USB Mass Storage devices
[ 1809.746834] usbcore: registered new interface driver usb-storage
[ 1809.746842] USB Mass Storage support registered.
[ 1809.748962] usb-storage: device found at 2
[ 1809.748970] usb-storage: waiting for device to settle before scanning
[ 1814.748584] usb-storage: device scan complete
[ 1814.749807] scsi 2:0:0:0: Direct-Access INTENSO USB 1100 PQ: 0 ANSI: 0 CCS
[ 1814.750774] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1814.775525] sd 2:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 1814.776717] sd 2:0:0:0: [sdb] Write Protect is off
[ 1814.776727] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 1814.776734] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1814.782012] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1814.782026] sdb: sdb1
[ 1814.797144] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1814.797157] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 2152.794979] pcmcia: Detected deprecated PCMCIA ioctl usage from process: lshw.
[ 2152.794986] pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
[ 2152.794990] pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
[ 2152.795121] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[ 2152.834892] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 2152.859861] pcmcia_socket pcmcia_socket0: cs: warning: no high memory space available!
[ 2488.370072] usb 1-2: USB disconnect, address 2
[ 4760.716162] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 4760.850850] usb 1-2: configuration #1 chosen from 1 choice
[ 4760.854470] scsi3 : SCSI emulation for USB Mass Storage devices
[ 4760.854705] usb-storage: device found at 3
[ 4760.854710] usb-storage: waiting for device to settle before scanning
[ 4765.852537] usb-storage: device scan complete
[ 4765.853632] scsi 3:0:0:0: Direct-Access INTENSO USB 1100 PQ: 0 ANSI: 0 CCS
[ 4765.854562] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 4765.877490] sd 3:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 4765.878471] sd 3:0:0:0: [sdb] Write Protect is off
[ 4765.878479] sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 4765.878485] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4765.884224] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4765.884237] sdb: sdb1
[ 4765.897907] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4765.897924] sd 3:0:0:0: [sdb] Attached SCSI removable disk
$$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:03:0d:1c:d4:50
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
Interruption:19 Adresse de base:0xd800
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:4 erreurs:0 :0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:240 (240.0 B) Octets transmis:240 (240.0 B)
wlan0 Link encap:Ethernet HWaddr 00:21:91:55:b7:28
inet adr:192.168.1.20 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::221:91ff:fe55:b728/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:662 erreurs:0 :0 overruns:0 frame:0
TX packets:87 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:205216 (205.2 KB) Octets transmis:12823 (12.8 KB)
wmaster0 Link encap:UNSPEC HWaddr 00-21-91-55-B7-28-35-35-00-00-00-00-00-00-00-00
UP RUNNING MTU:0 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
$$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"NEUF_4A78"
Mode:Managed Frequency:2.462 GHz Access Point: 00:25:15:51:4A:7C
Bit Rate=48 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:on
Link Quality=70/70 Signal level=-36 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
$$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
wlan0 Scan completed :
Cell 01 - Address: 00:25:15:51:4A:7C
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=70/70 Signal level=-32 dBm
Encryption key:on
ESSID:"NEUF_4A78"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=00000009ec42ae2f
Extra: Last beacon: 736ms ago
IE: Unknown: 00094E4555465F34413738
IE: Unknown: 010882848B962430486C
IE: Unknown: 03010B
IE: Unknown: 2A0100
IE: Unknown: 2F0100
IE: Unknown: 32040C121860
IE: Unknown: DD090010180201F0040000
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
Cell 02 - Address: 00:25:15:51:4A:7D
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=70/70 Signal level=-32 dBm
Encryption key:off
ESSID:"Neuf WiFi"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=00000009ec42a88b
Extra: Last beacon: 740ms ago
IE: Unknown: 00094E6575662057694669
IE: Unknown: 010882848B962430486C
IE: Unknown: 03010B
IE: Unknown: 2A0100
IE: Unknown: 2F0100
IE: Unknown: 32040C121860
IE: Unknown: DD090010180201F0040000
IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
Cell 03 - Address: 00:16:41:60:3C:60
Channel:10
Frequency:2.457 GHz (Channel 10)
Quality=46/70 Signal level=-64 dBm
Encryption key:on
ESSID:"Wanadoo_1d99"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=000000050b4a838f
Extra: Last beacon: 800ms ago
IE: Unknown: 000C57616E61646F6F5F31643939
IE: Unknown: 010882848B962430486C
IE: Unknown: 03010A
IE: Unknown: 2A0100
IE: Unknown: 2F0100
IE: Unknown: 32040C121860
IE: Unknown: DD060010180200F0
IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
$$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=9.10
DISTRIB_CODENAME=karmic
DISTRIB_DESCRIPTION="Ubuntu 9.10"
$$ sudo lshw -C network
*-network
description: Ethernet interface
product: SiS900 PCI Fast Ethernet
vendor: Silicon Integrated Systems [SiS]
physical id: 4
bus info: pci@0000:00:04.0
logical name: eth0
version: 91
serial: 00:03:0d:1c:d4:50
size: 10MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sis900 driverversion=v1.08.10 Apr. 2 2006 duplex=half latency=64 link=no maxlatency=11 mingnt=52 multicast=yes port=MII speed=10MB/s
resources: irq:19 ioport:d800(size=256) memory:dfffc000-dfffcfff memory:dffc0000-dffdffff(prefetchable)
*-network
description: Wireless interface
product: RT2561/RT61 rev B 802.11g
vendor: RaLink
physical id: 1
bus info: pci@0000:02:00.0
logical name: wmaster0
version: 00
serial: 00:21:91:55:b7:28
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list logical ethernet physical wireless
configuration: broadcast=yes driver=rt61pci ip=192.168.1.20 latency=64 multicast=yes wireless=IEEE 802.11bg
resources: irq:17 memory:24000000-24007fff
$$ lsmod
Module Size Used by
nls_iso8859_1 3740 1
nls_cp437 5372 1
vfat 10716 1
fat 51452 1 vfat
usb_storage 52576 1
cbc 3516 103
aes_i586 8124 105
aes_generic 27484 1 aes_i586
binfmt_misc 8356 1
ppdev 6688 0
arc4 1660 2
ecb 2524 3
rt61pci 20576 0
crc_itu_t 1852 1 rt61pci
rt2x00pci 7900 1 rt61pci
rt2x00lib 29756 2 rt61pci,rt2x00pci
led_class 4096 1 rt2x00lib
input_polldev 3716 1 rt2x00lib
mac80211 181140 2 rt2x00pci,rt2x00lib
cfg80211 93052 2 rt2x00lib,mac80211
joydev 10240 0
dm_crypt 12928 0
eeprom_93cx6 1916 1 rt61pci
snd_intel8x0 30168 2
snd_ac97_codec 101216 1 snd_intel8x0
ac97_bus 1532 1 snd_ac97_codec
snd_pcm_oss 37920 0
snd_mixer_oss 16028 1 snd_pcm_oss
iptable_filter 3100 0
snd_pcm 75296 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
pcmcia 36808 0
ip_tables 11692 1 iptable_filter
snd_seq_dummy 2656 0
snd_seq_oss 28576 0
snd_seq_midi 6432 0
snd_rawmidi 22208 1 snd_seq_midi
snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi
snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
x_tables 16544 1 ip_tables
psmouse 56500 0
lp 8964 0
yenta_socket 24296 3
snd_timer 22276 2 snd_pcm,snd_seq
snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 59204 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
k8temp 4188 0
soundcore 7264 1 snd
serio_raw 5280 0
rsrc_nonstatic 11644 1 yenta_socket
snd_page_alloc 9156 2 snd_intel8x0,snd_pcm
shpchp 32272 0
pcmcia_core 36528 3 pcmcia,yenta_socket,rsrc_nonstatic
i2c_sis96x 3904 0
parport 35340 2 ppdev,lp
sis_agp 6972 0
video 19380 0
output 2780 1 video
amd64_agp 9796 1
agpgart 34988 2 sis_agp,amd64_agp
sis900 19932 0
mii 5212 1 sis900
ohci1394 29900 0
ieee1394 86596 1 ohci1394
$$ lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
00:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
00:09.0 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
00:09.1 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
00:09.2 System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter
02:00.0 Network controller: RaLink RT2561/RT61 rev B 802.11g
$$ lspci -nn | grep -i net
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 91)
02:00.0 Network controller [0280]: RaLink RT2561/RT61 rev B 802.11g [1814:0302]
$$ lspcmcia -vv
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:00:09.0)
Configuration: state: on ready: unknown
Voltage: 3.3V Vcc: 3.3V Vpp: 3.3V
--none--
--none--
CardBus card -- see "lspci" for more information
Socket 1 Bridge: [yenta_cardbus] (bus ID: 0000:00:09.1)
Configuration: state: on ready: unknown
--none--
--none--
$$ lsusb
Bus 001 Device 002: ID 090c:1000 Feiya Technology Corp. Flash Drive
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
$$ cat /etc/network/interfaces
auto lo
iface lo inet loopback
$$ nm-tool
NetworkManager Tool
State: connected
- Device: eth0 -----------------------------------------------------------------
Type: Wired
Driver: sis900
State: unavailable
Default: no
HW Address: 00:03:0D:1C:D4:50
Capabilities:
Carrier Detect: yes
Speed: 10 Mb/s
Wired Properties
Carrier: off
- Device: wlan0 [Auto NEUF_4A78] ----------------------------------------------
Type: 802.11 WiFi
Driver: rt61pci
State: connected
Default: yes
HW Address: 00:21:91:55:B7:28
Capabilities:
Speed: 48 Mb/s
Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
Wireless Access Points (* = current AP)
*NEUF_4A78: Infra, 00:25:15:51:4A:7C, Freq 2462 MHz, Rate 54 Mb/s, Strength 100 WPA
Wanadoo_1d99: Infra, 00:16:41:60:3C:60, Freq 2457 MHz, Rate 54 Mb/s, Strength 57 WEP
Neuf WiFi: Infra, 00:25:15:51:4A:7D, Freq 2462 MHz, Rate 54 Mb/s, Strength 100
IPv4 Settings:
Address: 192.168.1.20
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.1
DNS: 192.168.1.1
$$ uname -rm
2.6.31-17-generic i686Il vaut mieux mobiliser son intelligence sur des conneries que de mobiliser sa connerie sur des choses intelligentes
Hors ligne