#1 Le 12/05/2006, à 00:02
- le peace up
Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
bonsoir à tous,
debutant sous ubuntu, meme si ca fait quelque temps que je suis debian, j'aurai besoin d'aide, apres mainte et mainte recherche je trouve pas ma solution.
Voila mon souci j'ai une carte tnt "Terratec Cinergy 2400 MCE Edition (Double tuner TNT, PCI express 1X)"http://www.yourland-micro.com/produits/fic4671.html et je n'arrive pas a la faire fonctionner sous ubuntu ou simplement sur le noyau linux.
je sais pas du tout par ou commencer je connai rien de cette carte je l'ai depuis peu et sous windows c'etait tres simple , hors mis que je veux absolument passer definitivement sous nunux voila ou j'en suis.
quel commande dois-je taper pour connaitre mon tuner, quel genre de logiciel ferai l'affaire avec ce genre de carte ...??? tant de question ss reponses.
Si une ame sympatique voulais bien ce mouillier avec moi ca serai cool.
Je suis pret a tout ecouter a la lettre bouffer de la lecture si vous avez des liens suseptible de m'aider ou meme passer sous msn ou autre chat pour m'aider en direct je ferai une doc complete suite a cette aide pour aider a mon tour d'autre utilisateur.
Merci d'avance au plaisir a bientot, cordialement,
Nico
Dernière modification par le peace up (Le 12/05/2006, à 00:04)
Hors ligne
#2 Le 13/05/2006, à 13:17
- pristella
Re : Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
Salut,
déjà tu peux aller ici pour voir si ta carte a été testé (apparemment non
http://www.linuxtv.org/wiki/index.php/PCI_devices_DVB-T
Ensuite, il faut connaitre le chipset de ta carte (ex : cx88xx conexant pour une 1400 cinergy, la mienne en l'occurence qui marche très bien mieux que sur windows.
un "dmesg"en commande peut déjà nous aider
un "lspci" .
un "lsmod" pour voir les modules qui sont charger.
Ensuite tu peux aller ici :
http://www.commentcamarche.net/faq/sujet-3120-tuto-carte-tv-terratec-1400-sur-mandriva-2006
c'est un petit tuto pour une carte cinergy 1400 dvb-t, ça peut t'aider déjà au niveau des prérequis.
A+
Dernière modification par pristella (Le 13/05/2006, à 13:23)
Hors ligne
#3 Le 18/05/2006, à 12:49
- le peace up
Re : Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
oki merci je vois ca se soir je vous tiens au courant si quelqu'un d'autre a d'autres info n'hesité pas merci .
amicalement, Nico
Hors ligne
#4 Le 17/07/2006, à 19:42
- le_peaceup
Re : Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
toujours besoin d'aide, rien ni fait, quelqu'un la eu depuis le temps que j'ai ecrit peut etre ?
#5 Le 17/07/2006, à 20:29
- le peace up
Re : Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
dmesg:
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hdc1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 2210.389 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179573.120000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179573.120000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[17179573.136000] Memory: 1026144k/1047424k available (2103k kernel code, 20560k reserved, 600k data, 332k init, 129920k highmem)
[17179573.136000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179573.216000] Calibrating delay using timer specific routine.. 4425.28 BogoMIPS (lpj=8850577)
[17179573.216000] Security Framework v1.0.0 initialized
[17179573.216000] SELinux: Disabled at boot.
[17179573.216000] Mount-cache hash table entries: 512
[17179573.216000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179573.216000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179573.216000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179573.216000] CPU: L2 Cache: 1024K (64 bytes/line)
[17179573.216000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[17179573.216000] mtrr: v2.0 (20020519)
[17179573.216000] Enabling fast FPU save and restore... done.
[17179573.216000] Enabling unmasked SIMD FPU exception support... done.
[17179573.216000] Checking 'hlt' instruction... OK.
[17179573.232000] SMP alternatives: switching to UP code
[17179573.232000] checking if image is initramfs... it is
[17179573.680000] Freeing initrd memory: 6762k freed
[17179573.688000] ACPI: Looking for DSDT ... not found!
[17179573.692000] CPU0: AMD Opteron(tm) Processor 148 stepping 01
[17179573.692000] Total of 1 processors activated (4425.28 BogoMIPS).
[17179573.692000] ENABLING IO-APIC IRQs
[17179573.692000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179573.840000] Brought up 1 CPUs
[17179573.840000] NET: Registered protocol family 16
[17179573.840000] EISA bus registered
[17179573.840000] ACPI: bus type pci registered
[17179573.840000] PCI: PCI BIOS revision 3.00 entry at 0xfa4c0, last bus=5
[17179573.840000] PCI: Using MMCONFIG
[17179573.840000] ACPI: Subsystem revision 20051216
[17179573.848000] ACPI: Interpreter enabled
[17179573.848000] ACPI: Using IOAPIC for interrupt routing
[17179573.848000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.848000] PCI: Probing PCI hardware (bus 00)
[17179573.852000] PCI: Transparent bridge - 0000:00:09.0
[17179573.852000] Boot video device is 0000:05:00.0
[17179573.852000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.916000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179573.916000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[17179573.916000] ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15)
[17179573.916000] ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15)
[17179573.916000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[17179573.916000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179573.916000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[17179573.916000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179573.920000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[17179573.920000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[17179573.920000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179573.920000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[17179573.920000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[17179573.920000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179573.920000] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[17179573.920000] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[17179573.920000] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179573.920000] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[17179573.920000] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[17179573.920000] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[17179573.920000] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[17179573.924000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[17179573.924000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[17179573.924000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[17179573.924000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[17179573.924000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[17179573.924000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[17179573.924000] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[17179573.924000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[17179573.924000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[17179573.924000] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[17179573.924000] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[17179573.924000] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[17179573.928000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.928000] pnp: PnP ACPI init
[17179573.932000] pnp: PnP ACPI: found 11 devices
[17179573.932000] PnPBIOS: Disabled by ACPI PNP
[17179573.932000] PCI: Using ACPI for IRQ routing
[17179573.932000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179573.996000] pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
[17179573.996000] pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
[17179573.996000] pnp: 00:00: ioport range 0x1400-0x147f has been reserved
[17179573.996000] pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
[17179573.996000] pnp: 00:00: ioport range 0x1800-0x187f has been reserved
[17179573.996000] pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
[17179573.996000] PCI: Bridge: 0000:00:09.0
[17179573.996000] IO window: 9000-afff
[17179573.996000] MEM window: fde00000-fdefffff
[17179573.996000] PREFETCH window: fdf00000-fdffffff
[17179573.996000] PCI: Bridge: 0000:00:0b.0
[17179573.996000] IO window: 8000-8fff
[17179573.996000] MEM window: fdd00000-fddfffff
[17179573.996000] PREFETCH window: fdc00000-fdcfffff
[17179573.996000] PCI: Bridge: 0000:00:0c.0
[17179573.996000] IO window: 7000-7fff
[17179573.996000] MEM window: fdb00000-fdbfffff
[17179573.996000] PREFETCH window: fda00000-fdafffff
[17179573.996000] PCI: Bridge: 0000:00:0d.0
[17179573.996000] IO window: 6000-6fff
[17179573.996000] MEM window: fd900000-fd9fffff
[17179573.996000] PREFETCH window: fd800000-fd8fffff
[17179573.996000] PCI: Bridge: 0000:00:0e.0
[17179573.996000] IO window: 5000-5fff
[17179573.996000] MEM window: fd700000-fd7fffff
[17179573.996000] PREFETCH window: d0000000-dfffffff
[17179573.996000] PCI: Setting latency timer of device 0000:00:09.0 to 64
[17179573.996000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[17179573.996000] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[17179573.996000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[17179573.996000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[17179574.000000] audit: initializing netlink socket (disabled)
[17179574.000000] audit(1153159484.996:1): initialized
[17179574.000000] highmem bounce pool size: 64 pages
[17179574.000000] VFS: Disk quotas dquot_6.5.1
[17179574.000000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179574.000000] Initializing Cryptographic API
[17179574.000000] io scheduler noop registered
[17179574.000000] io scheduler anticipatory registered
[17179574.000000] io scheduler deadline registered
[17179574.000000] io scheduler cfq registered
[17179582.000000] 0000:00:02.1 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[17179582.000000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[17179582.000000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[17179582.000000] assign_interrupt_mode Found MSI capability
[17179582.000000] Allocate Port Service[pcie00]
[17179582.000000] Allocate Port Service[pcie03]
[17179582.000000] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[17179582.000000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[17179582.000000] assign_interrupt_mode Found MSI capability
[17179582.000000] Allocate Port Service[pcie00]
[17179582.000000] Allocate Port Service[pcie03]
[17179582.000000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[17179582.000000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[17179582.000000] assign_interrupt_mode Found MSI capability
[17179582.000000] Allocate Port Service[pcie00]
[17179582.000000] Allocate Port Service[pcie03]
[17179582.000000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[17179582.000000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[17179582.000000] assign_interrupt_mode Found MSI capability
[17179582.000000] Allocate Port Service[pcie00]
[17179582.000000] Allocate Port Service[pcie03]
[17179582.000000] isapnp: Scanning for PnP cards...
[17179582.352000] isapnp: No Plug & Play device found
[17179582.364000] Real Time Clock Driver v1.12
[17179582.364000] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[17179582.364000] PNP: PS/2 controller doesn't have KBD irq; using default 1
[17179582.380000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179582.380000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179582.380000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179582.380000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179582.384000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179582.384000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179582.384000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179582.384000] mice: PS/2 mouse device common for all mice
[17179582.384000] EISA: Probing bus 0 at eisa.0
[17179582.384000] Cannot allocate resource for EISA slot 1
[17179582.384000] Cannot allocate resource for EISA slot 5
[17179582.384000] Cannot allocate resource for EISA slot 6
[17179582.384000] Cannot allocate resource for EISA slot 7
[17179582.384000] Cannot allocate resource for EISA slot 8
[17179582.384000] EISA: Detected 0 cards.
[17179582.384000] NET: Registered protocol family 2
[17179583.028000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179583.052000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179583.052000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[17179583.052000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[17179583.052000] TCP: Hash tables configured (established 131072 bind 65536)
[17179583.052000] TCP reno registered
[17179583.052000] TCP bic registered
[17179583.052000] NET: Registered protocol family 1
[17179583.052000] NET: Registered protocol family 8
[17179583.052000] NET: Registered protocol family 20
[17179583.052000] Using IPI No-Shortcut mode
[17179583.052000] ACPI wakeup devices:
[17179583.052000] HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 PS2M
[17179583.052000] ACPI: (supports S0 S1 S3 S4 S5)
[17179583.052000] Freeing unused kernel memory: 332k freed
[17179583.092000] vga16fb: initializing
[17179583.092000] vga16fb: mapped to 0xc00a0000
[17179583.200000] Console: switching to colour frame buffer device 80x25
[17179583.200000] fb0: VGA16 VGA frame buffer device
[17179584.320000] Capability LSM initialized
[17179584.348000] ACPI: Fan [FAN] (on)
[17179584.352000] ACPI: Thermal Zone [THRM] (28 C)
[17179584.816000] SCSI subsystem initialized
[17179584.816000] ACPI: bus type scsi registered
[17179584.816000] libata version 1.20 loaded.
[17179584.816000] sata_nv 0000:00:07.0: version 0.8
[17179584.816000] **** SET: Misaligned resource pointer: df8bbd02 Type 07 Len 0
[17179584.816000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[17179584.816000] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 217
[17179584.820000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[17179584.820000] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD400 irq 217
[17179584.820000] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD408 irq 217
[17179585.024000] ata1: no device found (phy stat 00000000)
[17179585.024000] scsi0 : sata_nv
[17179585.228000] ata2: no device found (phy stat 00000000)
[17179585.228000] scsi1 : sata_nv
[17179585.228000] **** SET: Misaligned resource pointer: df8bbd02 Type 07 Len 0
[17179585.228000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[17179585.228000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 225
[17179585.228000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[17179585.228000] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC000 irq 225
[17179585.228000] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC008 irq 225
[17179585.432000] ata3: no device found (phy stat 00000000)
[17179585.432000] scsi2 : sata_nv
[17179585.636000] ata4: no device found (phy stat 00000000)
[17179585.636000] scsi3 : sata_nv
[17179585.636000] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
[17179585.636000] NFORCE-CK804: chipset revision 162
[17179585.636000] NFORCE-CK804: not 100% native mode: will probe irqs later
[17179585.636000] NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
[17179585.636000] NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
[17179585.636000] ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA
[17179585.636000] ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA
[17179585.636000] Probing IDE interface ide0...
[17179586.652000] hdb: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
[17179586.712000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179586.716000] Probing IDE interface ide1...
[17179587.004000] hdc: Maxtor 6Y080L0, ATA DISK drive
[17179587.676000] ide1 at 0x170-0x177,0x376 on irq 15
[17179587.704000] hdb: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
[17179587.704000] Uniform CD-ROM driver Revision: 3.20
[17179587.708000] hdc: max request size: 128KiB
[17179587.708000] hdc: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[17179587.708000] hdc: cache flushes supported
[17179587.708000] hdc: hdc1 hdc2 < hdc5 >
[17179587.912000] sata_sil 0000:01:08.0: version 0.9
[17179587.912000] **** SET: Misaligned resource pointer: df8bbd02 Type 07 Len 0
[17179587.912000] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[17179587.912000] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 233
[17179587.912000] ata5: SATA max UDMA/100 cmd 0xF886A080 ctl 0xF886A08A bmdma 0xF886A000 irq 233
[17179587.912000] ata6: SATA max UDMA/100 cmd 0xF886A0C0 ctl 0xF886A0CA bmdma 0xF886A008 irq 233
[17179587.912000] ata7: SATA max UDMA/100 cmd 0xF886A280 ctl 0xF886A28A bmdma 0xF886A200 irq 233
[17179587.912000] ata8: SATA max UDMA/100 cmd 0xF886A2C0 ctl 0xF886A2CA bmdma 0xF886A208 irq 233
[17179588.116000] ata5: no device found (phy stat 00000000)
[17179588.116000] scsi4 : sata_sil
[17179588.320000] ata6: no device found (phy stat 00000000)
[17179588.320000] scsi5 : sata_sil
[17179588.524000] ata7: no device found (phy stat 00000000)
[17179588.524000] scsi6 : sata_sil
[17179588.728000] ata8: no device found (phy stat 00000000)
[17179588.728000] scsi7 : sata_sil
[17179588.788000] usbcore: registered new driver usbfs
[17179588.788000] usbcore: registered new driver hub
[17179588.788000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179588.788000] **** SET: Misaligned resource pointer: df8bb942 Type 07 Len 0
[17179588.788000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[17179588.788000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 50
[17179588.788000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179588.788000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[17179588.804000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[17179588.804000] ohci_hcd 0000:00:02.0: irq 50, io mem 0xfe02f000
[17179588.860000] hub 1-0:1.0: USB hub found
[17179588.860000] hub 1-0:1.0: 10 ports detected
[17179588.876000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
[17179588.896000] ieee1394: Initialized config rom entry `ip1394'
[17179588.964000] **** SET: Misaligned resource pointer: df8bb642 Type 07 Len 0
[17179588.964000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[17179588.964000] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 58
[17179588.964000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[17179588.964000] ehci_hcd 0000:00:02.1: EHCI Host Controller
[17179588.964000] ehci_hcd 0000:00:02.1: debug port 1
[17179588.964000] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[17179588.964000] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[17179588.964000] ehci_hcd 0000:00:02.1: irq 58, io mem 0xfeb00000
[17179588.964000] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179588.964000] hub 2-0:1.0: USB hub found
[17179588.964000] hub 2-0:1.0: 10 ports detected
[17179589.068000] **** SET: Misaligned resource pointer: df8bb4c2 Type 07 Len 0
[17179589.068000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[17179589.068000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 217
[17179589.068000] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[17179589.068000] forcedeth: using HIGHDMA
[17179589.588000] eth0: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:0a.0[17179589.588000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[17179589.588000] **** SET: Misaligned resource pointer: df8bb4c2 Type 07 Len 0
[17179589.588000] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[17179589.588000] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 66
[17179589.640000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[66] MMIO=[fdefe000-fdefe7ff] Max Packet=[2048]
[17179589.696000] Attempting manual resume
[17179589.728000] EXT3-fs: mounted filesystem with ordered data mode.
[17179589.748000] kjournald starting. Commit interval 5 seconds
[17179589.876000] usb 2-2: new high speed USB device using ehci_hcd and address 2
[17179590.432000] usb 2-4: new high speed USB device using ehci_hcd and address 4
[17179590.564000] hub 2-4:1.0: USB hub found
[17179590.564000] hub 2-4:1.0: 4 ports detected
[17179590.972000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000129200003f626]
[17179591.036000] ohci_hcd 0000:00:02.0: wakeup
[17179591.420000] usb 1-3: new full speed USB device using ohci_hcd and address 2
[17179591.952000] usb 1-5: new low speed USB device using ohci_hcd and address 3[17179592.532000] usb 1-6: new low speed USB device using ohci_hcd and address 4[17179592.952000] usb 2-4.1: new full speed USB device using ehci_hcd and address 7
[17179599.672000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[17179599.672000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[17179599.808000] **** SET: Misaligned resource pointer: f7deba82 Type 07 Len 0
[17179599.808000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[17179599.808000] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 74
[17179599.808000] skge 1.3 addr 0xfdef8000 irq 74 chip Yukon-Lite rev 9
[17179599.808000] skge eth1: addr 00:01:29:d3:51:b3
[17179599.900000] usbcore: registered new driver hiddev
[17179599.908000] input: Logitech USB Receiver as /class/input/input1
[17179599.908000] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-3
[17179599.908000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179599.920000] input: Logitech USB Receiver as /class/input/input2
[17179599.920000] input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-3
[17179599.928000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179599.980000] input: Logitech Logitech Cordless RumblePad 2 as /class/input/input3
[17179599.980000] input: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:00:02.0-5
[17179599.992000] input: Logitech USB Receiver as /class/input/input4
[17179599.992000] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-6
[17179600.004000] input: Logitech USB Receiver as /class/input/input5
[17179600.004000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-6
[17179600.004000] usbcore: registered new driver usbhid
[17179600.004000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179600.084000] Initializing USB Mass Storage driver...
[17179600.084000] scsi8 : SCSI emulation for USB Mass Storage devices
[17179600.084000] usb-storage: device found at 2
[17179600.084000] usb-storage: waiting for device to settle before scanning
[17179600.084000] usbcore: registered new driver usb-storage
[17179600.084000] USB Mass Storage support registered.
[17179600.216000] **** SET: Misaligned resource pointer: f79bd702 Type 07 Len 0
[17179600.216000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[17179600.216000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 225
[17179600.216000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[17179600.384000] Floppy drive(s): fd0 is 1.44M
[17179600.400000] FDC 0 is a post-1991 82077
[17179600.528000] input: PC Speaker as /class/input/input6
[17179600.536000] intel8x0_measure_ac97_clock: measured 54644 usecs
[17179600.536000] intel8x0: clocking to 46978
[17179600.712000] NET: Registered protocol family 17
[17179600.860000] ts: Compaq touchscreen protocol output
[17179601.128000] skge eth1: enabling interface
[17179601.376000] NET: Registered protocol family 10
[17179601.376000] lo: Disabled Privacy Extensions
[17179601.376000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[17179601.376000] IPv6 over IPv4 tunneling driver
[17179601.460000] lp: driver loaded but no devices found
[17179601.484000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[17179601.484000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179601.484000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179601.532000] Adding 3028212k swap on /dev/hdc5. Priority:-1 extents:1 across:3028212k
[17179601.676000] EXT3 FS on hdc1, internal journal
[17179601.836000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179601.836000] md: bitmap version 4.39
[17179602.380000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179602.936000] cdrom: open failed.
[17179605.084000] Vendor: Maxtor 6 Model: B200P0 Rev: 0 0
[17179605.084000] Type: Direct-Access ANSI SCSI revision: 00
[17179605.088000] usb-storage: device scan complete
[17179605.132000] Driver 'sd' needs updating - please use bus_type methods
[17179605.136000] SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
[17179605.136000] sda: assuming drive cache: write through
[17179605.140000] SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
[17179605.140000] sda: assuming drive cache: write through
[17179605.140000] sda: sda1
[17179605.168000] sd 8:0:0:0: Attached scsi disk sda
[17179605.180000] sd 8:0:0:0: Attached scsi generic sg0 type 0
[17179607.832000] ACPI: Power Button (FF) [PWRF]
[17179607.832000] ACPI: Power Button (CM) [PWRB]
[17179607.900000] ibm_acpi: ec object not found
[17179607.924000] pcc_acpi: loading...
[17179608.392000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
[17179608.396000] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[17179611.928000] Linux agpgart interface v0.101 (c) Dave Jones
[17179611.932000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179611.932000] [fglrx] Maximum main memory to use for locked dma buffers: 927 MBytes.
[17179611.932000] [fglrx] module loaded - fglrx 8.25.18 [May 18 2006] on minor 0[17179611.956000] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 74
[17179612.324000] eth0: no IPv6 routers present
[17179613.260000] [fglrx] total GART = 67108864
[17179613.260000] [fglrx] free GART = 51118080
[17179613.260000] [fglrx] max single GART = 51118080
[17179613.260000] [fglrx] total LFB = 126808064
[17179613.260000] [fglrx] free LFB = 116322304
[17179613.260000] [fglrx] max single LFB = 116322304
[17179613.260000] [fglrx] total Inv = 134217728
[17179613.260000] [fglrx] free Inv = 134217728
[17179613.260000] [fglrx] max single Inv = 134217728
[17179613.260000] [fglrx] total TIM = 0
[17179613.860000] ppdev: user-space parallel port driver
[17179614.428000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179614.428000] apm: overridden by ACPI.
[17179617.692000] Bluetooth: Core ver 2.8
[17179617.692000] NET: Registered protocol family 31
[17179617.692000] Bluetooth: HCI device and connection manager initialized
[17179617.692000] Bluetooth: HCI socket layer initialized
[17179617.716000] Bluetooth: L2CAP ver 2.8
[17179617.716000] Bluetooth: L2CAP socket layer initialized
[17179617.748000] Bluetooth: RFCOMM socket layer initialized
[17179617.748000] Bluetooth: RFCOMM TTY layer initialized
[17179617.748000] Bluetooth: RFCOMM ver 1.7
[17179797.168000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[17179797.172000] NTFS-fs warning (device sda1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
[17179797.392000] NTFS volume version 3.1.
Hors ligne
#6 Le 17/07/2006, à 20:30
- le peace up
Re : Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
lspci :
opteron@opteron:~$ lspci
0000:00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
0000:00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
0000:00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
0000:00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
0000:00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
0000:00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
0000:00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3)
0000:00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3)
0000:00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
0000:00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
0000:00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
0000:00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
0000:00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
0000:00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
0000:01:08.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02)
0000:01:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
0000:01:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
0000:04:00.0 Multimedia video controller: Unknown device 18c3:0720
0000:05:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5d4f
0000:05:00.1 Display controller: ATI Technologies Inc: Unknown device 5d6f
Hors ligne
#7 Le 17/07/2006, à 20:31
- le peace up
Re : Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
opteron@opteron:~$ lsmod
Module Size Used by
nls_utf8 2560 1
ntfs 114288 1
rfcomm 44244 0
l2cap 29184 5 rfcomm
bluetooth 54244 4 rfcomm,l2cap
ppdev 10052 0
fglrx 391980 8
agpgart 37072 1 fglrx
cpufreq_userspace 6816 0
cpufreq_stats 6912 0
freq_table 5152 1 cpufreq_stats
cpufreq_powersave 2240 0
cpufreq_ondemand 8104 0
cpufreq_conservative 9256 0
video 16644 0
tc1100_wmi 7172 0
sony_acpi 5900 0
pcc_acpi 12736 0
hotkey 11812 0
dev_acpi 11652 0
container 4928 0
button 6992 0
acpi_sbs 20556 0
battery 10308 1 acpi_sbs
ac 5508 1 acpi_sbs
i2c_acpi_ec 5440 1 acpi_sbs
sg 40352 0
sd_mod 20864 2
dm_mod 63640 1
md_mod 76244 0
sr_mod 18276 0
sbp2 25540 0
parport_pc 38340 0
lp 12612 0
parport 39560 3 ppdev,parport_pc,lp
ipv6 287456 20
tsdev 8320 0
joydev 10688 0
af_packet 25224 4
pcspkr 2564 0
psmouse 40132 0
floppy 65924 0
snd_intel8x0 35804 3
snd_ac97_codec 99296 1 snd_intel8x0
snd_ac97_bus 2688 1 snd_ac97_codec
snd_pcm_oss 56352 0
snd_mixer_oss 20800 1 snd_pcm_oss
usb_storage 80000 1
snd_pcm 96772 4 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 27204 2 snd_pcm
snd 60068 10 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 11040 1 snd
snd_page_alloc 11592 2 snd_intel8x0,snd_pcm
shpchp 49312 0
pci_hotplug 30916 1 shpchp
usbhid 42912 0
sk98lin 181216 0
skge 41424 0
i2c_nforce2 7360 0
i2c_core 23168 2 i2c_acpi_ec,i2c_nforce2
evdev 10432 4
ext3 148296 1
jbd 65684 1 ext3
ide_generic 1792 0
ohci1394 37684 0
ieee1394 307160 2 sbp2,ohci1394
forcedeth 33164 0
ehci_hcd 36104 0
ohci_hcd 22788 0
usbcore 138948 5 usb_storage,usbhid,ehci_hcd,ohci_hcd
sata_sil 9796 0
ide_disk 19520 3
ide_cd 36228 0
cdrom 41504 2 sr_mod,ide_cd
generic 5444 0
amd74xx 15324 0 [permanent]
sata_nv 10372 0
libata 84176 2 sata_sil,sata_nv
scsi_mod 145736 6 sg,sd_mod,sr_mod,sbp2,usb_storage,libata
thermal 14088 0
processor 26696 1 thermal
fan 5124 0
capability 5256 0
commoncap 7616 1 capability
vga16fb 14344 1
vgastate 10304 1 vga16fb
fbcon 44640 72
tileblit 3072 1 fbcon
font 8640 1 fbcon
bitblit 6592 1 fbcon
softcursor 2752 1 bitblit
Hors ligne
#8 Le 17/07/2006, à 23:40
- le peace up
Re : Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
please help me
Hors ligne
#9 Le 18/07/2006, à 00:40
- le peace up
Re : Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
re bonsoir,
ma carte n'ai pas detecté comment puis je la faire reconnaitre pour commencer?
Hors ligne
#10 Le 19/07/2006, à 19:52
- le_peace_up
Re : Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
up
#11 Le 23/07/2006, à 12:33
- will2
Re : Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
salut je vien juste de decouvrire ce site pour ma part cela marche plutot bien sur le bureau avec le soft *Terratec Home Cinema* mes impossible avec MCE .voici ma question que j'ais pose sur le site TVNT.net - PS si tu as trouve la solution merci de me la communiquer a l'e-mail solenn.astola@wanadoo.fr MERCI A PLUS.. :zziii: bonjour a toutes l'équipe de TVNT.net merci par avance "help" j'ai acheter une terratec 2400 IDT mce Edition avec le soft terratec home cinema 4.15.00.58 "d'ailleurs merci pour les infos de Franck Morin" mon pb et que ça marche bien avec T.H.cinema mes avec MCE les deux tuners son reconnue mes impossible de configurer le guide de la impossible de regarder ma TV sur MCE ?.......TERRATEC = menteur......
[/b] ......suite de mon PB dans la recherche du guide le MCE BUG sur la moitié du scan.. erreur code 3 sur le MCE. j'ai pu avoir quelqu'un au tel. chez terratec qui bien sur ni comprend :?: + a l'aide merci....
#12 Le 23/07/2006, à 13:36
- fmo
Re : Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
J'ai bien peur que ta seule chance soit d'essayer de compiler un des nouveaux noyaux Linux de la branche 2.6.17 ou pre-2.6.18, mais ca ne garantie rien.
www.terranux.net
Hors ligne
#13 Le 24/07/2006, à 21:35
- le peace up
Re : Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
Salut,
Perso moi sous MCE elle marche tres bien aucun souci les 2 tuners lisent et enregistre sans souci, j'ai la telecommande microsoft elle pilote tous a merveille mais sous ubuntu toujour rien.
D'une je manque de connaissance de deux personne n'a l'air de vraiment connaitre cette carte.
Hors ligne
#14 Le 24/07/2006, à 21:37
- le peace up
Re : Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
J'ai bien peur que ta seule chance soit d'essayer de compiler un des nouveaux noyaux Linux de la branche 2.6.17 ou pre-2.6.18, mais ca ne garantie rien.
oki mais quel risque pour ma stabilité ?
Hors ligne
#15 Le 24/07/2006, à 23:51
- fmo
Re : Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
Ce que tu peux faire c'est compiler un nouveau noyau, voir si ca marche.
Si ca marche, tu peux soit rester avec ton nouveau noyau, soit essayer de recuperer le code du module de ta carte et voir s'il marche avec le noyau 2.6.15 de ta Dapper.
www.terranux.net
Hors ligne
#16 Le 25/07/2006, à 00:03
- le peace up
Re : Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
comment je trouve le module deja? je sais rien de cette carte, elle est peu connu. Pourrais-tu m'orienter? je sais ce n'est pas simple sans le matos, mais la je suis deja pas un ancien avec linux mais la c'est newbie total avec sur ce sujet.
merci de tes reponses et de ton aide.
nico
Hors ligne
#17 Le 25/07/2006, à 05:17
- le peace up
Re : Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
lspci -v
0000:02:00.0 Multimedia video controller: Unknown device 18c3:0720
Subsystem: TERRATEC Electronic GmbH: Unknown device 1167
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at fddf0000 (32-bit, non-prefetchable) [size=64K]
Memory at fdde0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <available only to root>
Hors ligne
#18 Le 25/07/2006, à 09:38
- fmo
Re : Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
installe ton nouveau noyau et apres fait un
dmesg | grep video
et copie le contenu ici. Si ta carte est supportee, le noyau devrait enregistrer une entree "videoX" dans /dev
www.terranux.net
Hors ligne
#19 Le 01/08/2006, à 22:37
- le peace up
Re : Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
nico@Opteron:~$ dmesg | grep video
[17179571.520000] Boot video device is 0000:05:00.0
Je n'ai toujours pas compiler un nouveau noyau je sais pas trop par ou et comment commencer je vais lire de la doc avant voila si ous avez d'autre idee qui pourrai m'aider.
merci
Hors ligne
#20 Le 05/08/2006, à 00:07
- le peace up
Re : Terratec Cinergy 2400 IDT MCE Edition (Double tuner TNT, PCI express 1
petit probleme pour compiler un noyau je comprend rien au explication
make[1]: entrant dans le répertoire « /home/nico/kernel/linux-2.6.17.7 »
CHK include/linux/version.h
CC [M] drivers/media/dvb/ttpci/budget-av.o
drivers/media/dvb/ttpci/budget-av.c: Dans la fonction «frontend_init» :
drivers/media/dvb/ttpci/budget-av.c:1063: erreur: «struct budget_av» has no member named «reinitialise_demod»
drivers/media/dvb/ttpci/budget-av.c:1068: erreur: request for member «tuner_ops» in something not a structure or union
drivers/media/dvb/ttpci/budget-av.c:1068: erreur: «philips_cu1216_tuner_set_params» undeclared (first use in this function)
drivers/media/dvb/ttpci/budget-av.c:1068: erreur: (Chaque identificateur non déclaré est rapporté une seule fois
drivers/media/dvb/ttpci/budget-av.c:1068: erreur: pour chaque fonction dans laquelle il apparaît.)
make[5]: *** [drivers/media/dvb/ttpci/budget-av.o] Erreur 1
make[4]: *** [drivers/media/dvb/ttpci] Erreur 2
make[3]: *** [drivers/media/dvb] Erreur 2
make[2]: *** [drivers/media] Erreur 2
make[1]: *** [drivers] Erreur 2
make[1]: quittant le répertoire « /home/nico/kernel/linux-2.6.17.7 »
make: *** [stamp-build] Erreur 2
Hors ligne