Pages : 1
#1 Le 26/06/2010, à 15:31
- ahd270
D-LINK DWA 110 et lucid lynx [RESOLU]
Bonjour,
Je viens de passer de 8.04 à 10.04.
J'avais réussi à faire fonctionner ma clef DWA 110 avec rt 73 et rutilt grace à Willy
http://wlety.free.fr/forum/viewtopic.php?id=170
Evidement plus rien ne fonctionne sous lucid lynx
J'ai réinstallé rutilt. J'ai essayé de reinstaller les pilotes RT73
Merci d'avance.
toma@Thomas Renard:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=10.04
DISTRIB_CODENAME=lucid
DISTRIB_DESCRIPTION="Ubuntu 10.04 LTS"
toma@Thomas Renard:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 05e3:0503 Genesys Logic, Inc.
Bus 002 Device 002: ID 07d1:3c07 D-Link System Wireless G DWA-110 Adapter
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0bda:0116 Realtek Semiconductor Corp. Mass Storage Device
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8600M GS (rev a1)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01)
lspci -nn | grep -i net
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 01)
toma@Thomas Renard:~$ sudo lshw -C network
sudo: unable to resolve host Thomas Renard
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:04:00.0
logical name: eth1
version: 01
serial: 00:40:d0:e7:ed:0b
size: 100MB/s
capacity: 100MB/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.24 latency=0 link=yes multicast=yes port=MII speed=100MB/s
resources: irq:29 ioport:4000(size=256) memory:f8000000-f8000fff memory:f2000000-f201ffff(prefetchable)
lsmod
Module Size Used by
binfmt_misc 6587 1
ppdev 5259 0
joydev 8708 0
snd_hda_codec_realtek 203168 2
snd_hda_intel 21877 2
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_hda_codec 74201 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5412 1 snd_hda_codec
nvidia 9961216 30
snd_pcm 70662 3 snd_hda_intel,snd_pcm_oss,snd_hda_codec
snd_seq_dummy 1338 0
snd_seq_oss 26726 0
snd_seq_midi 4557 0
snd_rawmidi 19056 1 snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 19098 2 snd_pcm,snd_seq
snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
gspca_gl860 48871 0
gspca_main 21199 1 gspca_gl860
videodev 34361 1 gspca_main
v4l1_compat 13251 1 videodev
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
snd 54148 16 snd_hda_codec_realtek,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
intel_agp 24177 0
vga16fb 11385 1
vgastate 8961 1 vga16fb
pcspkr 1518 0
psmouse 63245 0
serio_raw 3978 0
agpgart 31724 2 nvidia,intel_agp
soundcore 6620 1 snd
snd_page_alloc 7076 2 snd_hda_intel,snd_pcm
video 17375 0
output 1871 1 video
lp 7028 0
parport 32635 2 ppdev,lp
usb_storage 39425 0
r8169 33980 0
mii 4381 1 r8169
ahci 32008 3
iwconfig
lo no wireless extensions.
eth1 no wireless extensions.
ifconfig
eth1 Link encap:Ethernet HWaddr 00:40:d0:e7:ed:0b
inet adr:192.168.1.24 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::240:d0ff:fee7:ed0b/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:3974 erreurs:0 :0 overruns:0 frame:0
TX packets:1961 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:1450185 (1.4 MB) Octets transmis:235280 (235.2 KB)
Interruption:29 Adresse de base:0x2000
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:16 erreurs:0 :0 overruns:0 frame:0
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:960 (960.0 B) Octets transmis:960 (960.0 B)
uname -r -m
2.6.32-22-generic i686
toma@Thomas Renard:~$ cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto wlan1
iface wlan1 inet dhcp
iface dsl-provider inet ppp
pre-up /sbin/ifconfig eth1 up # line maintained by pppoeconf
provider dsl-provider
nm-tool
NetworkManager Tool
State: connected
** (process:1953): WARNING **: error: failed to read connections from org.freedesktop.NetworkManagerUserSettings:
The name org.freedesktop.NetworkManagerUserSettings was not provided by any .service files
- Device: eth1 [Auto eth1] ----------------------------------------------------
Type: Wired
Driver: r8169
State: connected
Default: yes
HW Address: 00:40:D0:E7:ED:0B
Capabilities:
Carrier Detect: yes
Speed: 100 Mb/s
Wired Properties
Carrier: on
IPv4 Settings:
Address: 192.168.1.24
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.1
DNS: 192.168.1.1
Dernière modification par ahd270 (Le 27/06/2010, à 11:16)
Hors ligne
#2 Le 27/06/2010, à 10:15
- toutafai
Re : D-LINK DWA 110 et lucid lynx [RESOLU]
bonjour,
le module rt73 n'est pas correctement installé (rien dans le retour du lsmod), essaye un
sudo modprobe rt73 # si cela fait une erreur pas la peine d'aller plus loin
sudo ifconfig wlan0 # une de ces 2 commande va foirer
sudo ifcondig ra0 up # une de ces 2 commande va foirer
puis redonne le retour d'un
ifconfig
Tombé dans l'informatique étant petit, j'en ai fait mon métier. Utilisateur d'Ubuntu depuis novembre 2006, actuellement sous 20.04 x64 (Que d'évolution
depuis Dapper Drake ! Ça rajeunit pas ^^^).
Hors ligne
#3 Le 27/06/2010, à 11:16
- ahd270
Re : D-LINK DWA 110 et lucid lynx [RESOLU]
Merci beau coup, tu m'as l'air toutafai compétent :
comme tu m'as dit, j'ai fait
sudo ifconfig wlan0
#qui renvoie#
wlan0 Link encap:Ethernet HWaddr 00:1e:58:b3:8d:ed
BROADCAST MULTICAST MTU:1500 Metric:1
Et magie de l'informatique la clef s'allume, Rutilt devient actif et je peut me connecter.
Par contre lorsque je redémarre l'ordi, la clef ne s'allume pas toute seule? et rutilt renvoie une erreure. Il faut que je refasse ifconfig wlan0
Une idée?
je mets RESOLU dans le titre
Hors ligne
#4 Le 27/06/2010, à 13:03
- toutafai
Re : D-LINK DWA 110 et lucid lynx [RESOLU]
de rien.
pour automatiser la chose tu peux essayer d'ajouter ces 2 lignes a ton fichier /etc/network/interfaces
auto wlan0
iface wlan0 inet dhcp
Tombé dans l'informatique étant petit, j'en ai fait mon métier. Utilisateur d'Ubuntu depuis novembre 2006, actuellement sous 20.04 x64 (Que d'évolution
depuis Dapper Drake ! Ça rajeunit pas ^^^).
Hors ligne
Pages : 1