#1 Le 24/11/2010, à 14:18
- fabulous_
Cinepaint sous Maverick (ubuntu 10.10)
Bonjour !
J'ai essayé d'installer Cinepaint sous Maverick ! J'ai ajouté les dépôts Getdeb, à la main et avec les packages car l'un ne marchait pas... j'ai ajouté la clé...mais avec les deux ça n'a pas marché ! Le paquet Cinepain n'est pas trouvé !
Sur le site de Getdeb lorsqu'on recherche Cinepaint sous Ubuntu 10.10 cela ne donne rien... cela s'arrête au 10.04...
Quelqu'un aurait une idée ?
Merci d'avance !
Hors ligne
#2 Le 24/11/2010, à 22:36
- bobtux
Re : Cinepaint sous Maverick (ubuntu 10.10)
regarde par ici directement: http://www.cinepaint.org/2010/11/14/cin … ck-online/
http://sourceforge.net/projects/cinepaint/
euh pardon j'ai regarder et apparemment que la source, je laisse au cas ou en espérant que ça te serve
Dernière modification par bobtux (Le 24/11/2010, à 22:54)
Hors ligne
#3 Le 25/11/2010, à 00:12
- fabulous_
Re : Cinepaint sous Maverick (ubuntu 10.10)
Merci beaucoup pour ta réponse bobtux !
J'ai pris le source et j'ai essayé de lancer le "./configure" et j'obtiens cela en résultat :
Configuration Results
GTK CinePaint Version 0.22-1
General dependencies:
./configure: line 29441: gtk-config: command not found
Gtk1 toolkit yes
DnD support no
littleCMS no CinePaint will not build without
Oyranos noPlug-ins with external dependencies:
Python plug-in: no
OpenEXR plug-in: yes OpenEXR
Tiff plug-in: no CinePaint will not build without
PNG plug-in: yes libpng 1.2.44
Jpeg plug-in: no CinePaint will not build without
Print plug-in: no
FLTK dependent plug-ins: no CinePaint will not build without
Thread dependent plug-ins: yes icc_examin
Flex dependent plug-ins: no
=================================================================configure: error: !!! An ERROR occured !!!
Please check the above messages to see why.
For bug reports please include the complete above output.
Arf, y'a beaucoup de "no" là dedans ! Vous savez comment faut s'y prendre ?
Je vous remercie beaucoup !
Hors ligne
#4 Le 25/11/2010, à 01:44
- fabulous_
Re : Cinepaint sous Maverick (ubuntu 10.10)
Voilà du nouveau :
Configuration Results
GTK CinePaint Version 0.22-1
General dependencies:
./configure: line 29441: gtk-config: command not found
Gtk1 toolkit yes
DnD support no
littleCMS yes lcms 1.18
Oyranos no
Plug-ins with external dependencies:
Python plug-in: no
OpenEXR plug-in: yes OpenEXR
Tiff plug-in: yes
PNG plug-in: yes libpng 1.2.44
Jpeg plug-in: yes
Print plug-in: no
FLTK dependent plug-ins: yes bracketing_to_hdr collect pdf
Thread dependent plug-ins: yes icc_examin
Flex dependent plug-ins: yes iol
=================================================================
configure: error: !!! An ERROR occured !!!
Please check the above messages to see why.
For bug reports please include the complete above output.Hors ligne
#5 Le 25/11/2010, à 12:07
- fabulous_
Re : Cinepaint sous Maverick (ubuntu 10.10)
Gtk1 toolkit yes
DnD support no
littleCMS yes lcms 1.18
Oyranos yes oyranos 0.1.9Plug-ins with external dependencies:
Python plug-in: no
OpenEXR plug-in: yes OpenEXR
Tiff plug-in: yes
PNG plug-in: yes libpng 1.2.44
Jpeg plug-in: yes
Print plug-in: no
FLTK dependent plug-ins: yes bracketing_to_hdr collect pdf
Thread dependent plug-ins: yes icc_examin
Flex dependent plug-ins: yes iol
littleCMS a été trouvé en tapant lmcs sur synaptic (le fichier "dev")
Oyranos a été trouvé sur synaptic après avoir rajouté les dépôts Getdeb...
Les Plug-ins Tiff, PNG et Jpeg ont été trouvé sur Synaptic
FLTK a aussi été trouvé sur Synaptic (le fichier "dev")
Flex a été trouvé sur synaptic (c'est pas le fichier "dev")
Le paquet elektra-dev a aussi été rajouté !
Package elektra was not found in the pkg-config search path.
Perhaps you should add the directory containing `elektra.pc'
to the PKG_CONFIG_PATH environment variable
No package 'elektra' found
Pour ma part il me reste le Print plug-in à avoir, le DnD support et le plug-in Python...
Si vous avez des informations là-dessus, ce serait cool !
Merci d'avance !
Dernière modification par fabulous_ (Le 25/11/2010, à 12:13)
Hors ligne
#6 Le 26/11/2010, à 16:00
- fabulous_
Re : Cinepaint sous Maverick (ubuntu 10.10)
Personne n'a d'information là-dessus ?
Quand est-ce que Cinepaint sera rajouté sur Maverick ?
Merci à vous !
Hors ligne
#7 Le 05/12/2010, à 22:26
- plantierj07
Re : Cinepaint sous Maverick (ubuntu 10.10)
bonjour
moi aussi je cherche, j'en suis là mais maintenant je bloque.
Configuration Results
GTK CinePaint Version 0.22-1
General dependencies:
./configure: line 29441: gtk-config: command not found
Gtk1 toolkit yes
DnD support yes X11/Xmu
littleCMS yes lcms 1.18
Oyranos yes oyranos 0.1.9
Plug-ins with external dependencies:
Python plug-in: yes python2.6
OpenEXR plug-in: yes OpenEXR 1.6.1
Tiff plug-in: yes
PNG plug-in: yes libpng 1.2.44
Jpeg plug-in: yes
Print plug-in: no
FLTK dependent plug-ins: yes bracketing_to_hdr collect pdf
Thread dependent plug-ins: yes icc_examin
Flex dependent plug-ins: yes iol
=================================================================
configure: error: !!! An ERROR occured !!!
Please check the above messages to see why.
For bug reports please include the complete above output.pour virer le no de pyton plugin : ./configure --enable-pygimp
dans ./configure --help il propose aussi --disable-print mais cela ne change rien.
pour DnD support, je sais plus ce que j'ai fait.
ce qui me pose problème c'est :
PKG_CONFIG_PATH =
checking fd_set and sys/select... yes
checking for yywrap in -lfl... yes
checking for pthread_create in -lpthread... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking for pkg-config... /usr/bin/pkg-config
checking for glib-config... no
configure: WARNING:
*** Check for glib-config failed.
*** You can download Glib from http://www.gtk.org/ .
*** As well check if the glib-devel or similiar package is installed on your
*** distribution.
checking for inline definition in glibconfig.h... no
checking for inline... inline
checking for gtk-config... no
checking for GTK - version >= 1.2.8... no
*** The gtk-config script installed by GTK could not be found
*** If GTK was installed in PREFIX, make sure PREFIX/bin is in
*** your path, or set the GTK_CONFIG environment variable to the
*** full path to gtk-config.
configure: WARNING: Test for GTK failed. See the file 'INSTALL' for help.
checking locale.h usability... yessi quelqu'un a une idée...merci à lui.
Hors ligne
#8 Le 05/12/2010, à 22:30
- plantierj07
Re : Cinepaint sous Maverick (ubuntu 10.10)
j'ajoute ce que donne le ./configure --help , ça donnerai peut être des idées à certain.
./configure --help
`configure' configures this package to adapt to many kinds of systems.
Usage: ./configure [OPTION]... [VAR=VALUE]...
To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.
Defaults for the options are specified in brackets.
Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print `checking...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for `--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or `..']
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[/usr/local]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]
By default, `make install' will install all the files in
`/usr/local/bin', `/usr/local/lib' etc. You can specify
an installation prefix other than `/usr/local' using `--prefix',
for instance `--prefix=$HOME'.
For better control, use the options below.
Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--datadir=DIR read-only architecture-independent data [PREFIX/share]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--infodir=DIR info documentation [PREFIX/info]
--mandir=DIR man documentation [PREFIX/man]
Program names:
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM run sed PROGRAM on installed program names
System types:
--build=BUILD configure for building on BUILD [guessed]
--host=HOST cross-compile to build programs to run on HOST [BUILD]
Optional Features:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors
--enable-shared[=PKGS]
build shared libraries [default=yes]
--enable-static[=PKGS]
build static libraries [default=yes]
--enable-fast-install[=PKGS]
optimize for fast installation [default=yes]
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the [color=red][b]SPAM[/b][/color] installer
--enable-gtk2 enable gtk2 support [default=no]
--disable-gtktest Do not try to compile and run a test GTK program
--enable-debug turn on debugging [default=no]
--enable-profile turn on profiling [default=no]
--enable-ansi turn on strict ansi [default=no]
--enable-programdotdir=DIR change default programdotdir from .cinepaint to DIR
--enable-precision={u8,u16,half,float} set the data precision [default=u16]
--disable-print build without print support (requires libgutenprint)
--enable-pygimp experimental python support [default=no]
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-pic try to use only PIC/non-PIC objects [default=use
both]
--with-tags[=TAGS]
include additional configurations [automatic]
--with-desktop=dir specify the path to install desktop file
--with-pixmap=dir specify the path to install desktop pixmap file
--with-gtk-prefix=PFX Prefix where GTK is installed (optional)
--with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)
--with-python=path Set location of Python executable
Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
headers in a nonstandard directory <include dir>
CXX C++ compiler command
CXXFLAGS C++ compiler flags
CPP C preprocessor
CXXCPP C++ preprocessor
F77 Fortran 77 compiler command
FFLAGS Fortran 77 compiler flags
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.Hors ligne
#9 Le 05/12/2010, à 22:40
- plantierj07
Re : Cinepaint sous Maverick (ubuntu 10.10)
bon je viens de tester avec ces options :
./configure --enable-pygimp --enable-gtk2 --disable-print
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether build environment is sane... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ANSI C... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C preprocessor... gcc -E
checking for a BSD-compatible install... /usr/bin/install -c
checking whether make sets $(MAKE)... (cached) yes
checking whether ln -s works... yes
checking build system type... x86_64-unknown-linux
checking host system type... x86_64-unknown-linux
checking for a sed that does not truncate output... /bin/sed
checking for egrep... grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking how to recognise dependent libraries... pass_all
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for f77... no
checking for xlf... no
checking for frt... no
checking for pgf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for f90... no
checking for xlf90... no
checking for pgf90... no
checking for epcf90... no
checking for f95... no
checking for fort... no
checking for xlf95... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for gfortran... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether accepts -g... no
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
appending configuration tag "F77" to libtool
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether byte ordering is bigendian... no
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking whether time.h and sys/time.h may both be included... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking sys/times.h usability... yes
checking sys/times.h presence... yes
checking for sys/times.h... yes
checking for unistd.h... (cached) yes
checking for pid_t... yes
checking return type of signal handlers... void
checking for vprintf... yes
checking for _doprnt... no
checking for working alloca.h... yes
checking for alloca... yes
PKG_CONFIG_PATH =
checking fd_set and sys/select... yes
checking for yywrap in -lfl... yes
checking for pthread_create in -lpthread... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking for pkg-config... /usr/bin/pkg-config
checking for Gtk2... (version 2.22.0) yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... yes
checking for dgettext in libc... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... /usr/bin/msgfmt
checking for dcgettext... yes
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for catalogs to be installed... ca cs da de el en_GB es fi fr ga gl hu hr it ja ko lt nl nn no pl pt pt_BR ro ru sk sl sv tr uk zh_CN zh_TW
checking for TIFF support... checking for TIFFOpen in -ltiff... yes
checking tiff.h usability... yes
checking tiff.h presence... yes
checking for tiff.h... yes
checking tiffio.h usability... yes
checking tiffio.h presence... yes
checking for tiffio.h... yes
checking for pkg-config... /usr/bin/pkg-config
checking for OpenEXR... (version 1.6.1) yes
checking for JPEG support... checking for jinit_memory_mgr in -ljpeg... yes
checking for gzsetparams in -lz... yes
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for pkg-config... /usr/bin/pkg-config
checking for libpng... (version 1.2.44) yes
checking for pkg-config... /usr/bin/pkg-config
checking for lcms >= 1.16... yes (version 1.18)
checking for XmuClientWindow in -lXmu... yes
checking X11/Xmu/WinUtil.h usability... yes
checking X11/Xmu/WinUtil.h presence... yes
checking for X11/Xmu/WinUtil.h... yes
checking for oyranos-config... /usr/bin/oyranos-config
checking for fltk-config... /usr/bin/fltk-config
checking sys/ipc.h usability... yes
checking sys/ipc.h presence... yes
checking for sys/ipc.h... yes
checking sys/shm.h usability... yes
checking sys/shm.h presence... yes
checking for sys/shm.h... yes
checking whether shmctl IPC_RMID allowes subsequent attaches... yes
checking for python... /usr/bin/python
checking for python version... 2.6
checking for python platform... linux2
checking for python script directory... ${prefix}/lib/python2.6/site-packages
checking for python extension module directory... ${exec_prefix}/lib/python2.6/site-packages
checking for python... /usr/bin/python
checking for Python prefix... /usr
checking for Python exec-prefix... /usr
checking for Python version... python2.6
checking for Python header files... -I/usr/include/python2.6 -I/usr/lib/python2.6/config
checking for Python library... -L/usr/lib/python2.6/config
checking fltk dependend plug-ins ... yes "bracketing_to_hdr" "collect" "pdf"
checking thread dependend plug-ins ... yes "icc_examin"
checking flex dependend plug-ins ... yes "iol"
checking for rpm... no
configure: creating ./config.status
config.status: creating Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating user_install
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating gimprc
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating gimprc_user
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating cinepainttool
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating cinepaint-gtk.pc
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating cinepaint.spec
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating lib/version.h
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating lib/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating lib/wire/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating lib/fl_i18n/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating libgimp/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating libgimp/gimpintl.h
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating libhalf/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/blur/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/bmp/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/bracketing_to_hdr/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/bracketing_to_hdr/br_core/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/bracketing_to_hdr/FL_adds/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/bracketing_to_hdr/gui/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/bracketing_to_hdr/jhead/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/cineon/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/collect/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/compose/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/dbbrowser/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/decompose/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/dicom/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/edge/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/fits/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/gauss_rle/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/gbr/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/gifload/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/hdr/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/icc_examin/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/iff/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/iol/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/iol/examples/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/jpeg/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/mblur/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/median/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/minimum/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/noisify/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/openexr/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/pic/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/pdf/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/png/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/pnm/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/print/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/psd/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/psd_save/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/pygimp/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/pygimp/doc/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/pygimp/plug-ins/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/script-fu/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/script-fu/scripts/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/rawphoto/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/retinex/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/rotate/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/screenshot/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/sgi/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/sharpen/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/snoise/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/sobel/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/spread/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/tga/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/tiff/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/unsharp/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating plug-ins/xwd/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating po/Makefile.in
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating po-plug-ins/Makefile.in
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating po-plug-ins/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating po-script-fu/Makefile.in
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating po-script-fu/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating app/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating app/depth/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating data/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating data/brushes/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating data/curves/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating data/gradients/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating data/palettes/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating data/patterns/Makefile
sed: file ./confstatPm0Seb/subs-4.sed line 33: unterminated `s' command
config.status: creating lib/config.h
config.status: lib/config.h is unchanged
config.status: executing depfiles commands
config.status: executing default-1 commands
config.status: executing default commands
configure: configuring in plug-ins/icc_examin/icc_examin
configure: running /bin/bash './configure' --prefix=/usr/local '--enable-pygimp' '--enable-gtk2' '--disable-print' --cache-file=/dev/null --srcdir=.
################################################################
# #
Welcome to ICC Examin Version 0.43 configurator
# #
# Configuration #
Linux system detected
Ubuntu 10.10
X86_64 try build in 64 bit mode
Oyranos 0.1.9 detected
littleCMS 1.18 detected
X11 detected
X VidMode extension detected
X Xinerama detected
libXpm is available
libXext is available
FTGL 2.1.3~rc5 detected
FLTK 1.1.10 detected
PNG 1.2.44 detected
libdl is available
detected
Gettext detected
translations available: de eo fr
local CinePaint detected
generated icc_examin.spec from icc_examin.spec.in
prefix = /usr/local
################################################################
# Configuration #
prefix = /usr/local
exec_prefix = /usr/local
bindir = /usr/local/bin
sbindir = /usr/local/sbin
libdir = /usr/local/lib64
includedir = /usr/local/include
datadir = /usr/local/share
mandir = /usr/local/share/man
pixmapdir = /usr/local/share/pixmaps
desktopdir = /usr/local/share/applications
INCL : INCL=-I$(includedir) -I/usr/X11R6/include -I. -I/usr/include/g++ -I/usr/include
CFLAGS = $(INCL)
CXXFLAGS = $(INCL)
LDFLAGS = -L.
################################################################
preparing Makefile in ./
preparing Makefile in fl_i18n/
Makefile:15: *** missing separator. Stop.
=================================================================
Configuration Results
GTK CinePaint Version 0.22-1
General dependencies:
Gtk2 toolkit yes 2.22.0
DnD support yes X11/Xmu
littleCMS yes lcms 1.18
Oyranos yes oyranos 0.1.9
Plug-ins with external dependencies:
Python plug-in: yes python2.6
OpenEXR plug-in: yes OpenEXR 1.6.1
Tiff plug-in: yes
PNG plug-in: yes libpng 1.2.44
Jpeg plug-in: yes
Print plug-in: no
FLTK dependent plug-ins: yes bracketing_to_hdr collect pdf
Thread dependent plug-ins: yes icc_examin
Flex dependent plug-ins: yes iol
=================================================================
Now type 'make' and 'make install' / 'make rpm' to build the package and
install. The unix command is 'cinepaint'.maintenant je n'ai plus le problème avec glib-config et gtk, je fais quoi le make-truc-machin, bon je tente (c'est une 1er pour moi).
Hors ligne
#10 Le 06/12/2010, à 00:08
- plantierj07
Re : Cinepaint sous Maverick (ubuntu 10.10)
bon le make n'a rien donné car le fichier makefile était vide.
donc j'ai récupéré le fichier autogen.sh que j'ai trouvé entre temps ici autogen.sh
je l'ai collé dans le répertoire de cinepaint.
puis toujours du répertoire de cinepaint :
sh autogen.sh
./configure --enable-pygimp --enable-gtk2 --disable-print
je tente le "make" car le fichier à bien été créé, mais j'obtient :
Makefile:188: *** séparateur manquant . Arrêt.
après recherche, sur le fichier à la ligne 188, j'ai supprimé les espace en début et remplacé par une TAB.
maintenant j'ai :
Makefile:188: *** les commandes commencent avant la première cible. Arrêt.
donc ça avance pas lourd, mais bon j'y connais rien en compilation, alors c'est normal...
si un pro du makefile passe par là je laisse le fichier.
# Makefile.in generated by automake 1.9.1 from Makefile.am.
# Makefile. Generated from Makefile.in by configure.
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
srcdir = .
top_srcdir = .
pkgdatadir = $(datadir)/cinepaint
pkglibdir = $(libdir)/cinepaint
pkgincludedir = $(includedir)/cinepaint
top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/bin/install -c
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-unknown-linux
host_triplet = x86_64-unknown-linux
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/cinepaint-gtk.pc.in \
$(srcdir)/cinepaint.spec.in $(srcdir)/cinepainttool.in \
$(srcdir)/gimprc.in $(srcdir)/gimprc_user.in \
$(srcdir)/user_install.in $(top_srcdir)/configure AUTHORS \
COPYING ChangeLog INSTALL NEWS config.guess config.sub depcomp \
install-sh ltconfig ltmain.sh missing mkinstalldirs py-compile
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno configure.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/lib/config.h
CONFIG_CLEAN_FILES = user_install gimprc gimprc_user cinepainttool \
cinepaint-gtk.pc cinepaint.spec
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(programdatadir)" \
"$(DESTDIR)$(man1dir)" "$(DESTDIR)$(desktopdir)" \
"$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(pixmapdir)" \
"$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(programdatadir)"
binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
programdataSCRIPT_INSTALL = $(INSTALL_SCRIPT)
SCRIPTS = $(bin_SCRIPTS) $(programdata_SCRIPTS)
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-exec-recursive install-info-recursive \
install-recursive installcheck-recursive installdirs-recursive \
pdf-recursive ps-recursive uninstall-info-recursive \
uninstall-recursive
man1dir = $(mandir)/man1
NROFF = nroff
MANS = $(man_MANS)
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
desktopDATA_INSTALL = $(INSTALL_DATA)
m4dataDATA_INSTALL = $(INSTALL_DATA)
pixmapDATA_INSTALL = $(INSTALL_DATA)
pkgconfigDATA_INSTALL = $(INSTALL_DATA)
programdataDATA_INSTALL = $(INSTALL_DATA)
DATA = $(desktop_DATA) $(m4data_DATA) $(pixmap_DATA) $(pkgconfig_DATA) \
$(programdata_DATA)
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
{ test ! -d $(distdir) \
|| { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = ${SHELL} /home/plantier/Téléchargements/cinepaint-0.22-1/missing --run aclocal-1.9
ALLOCA =
AMDEP_FALSE = #
AMDEP_TRUE =
AMTAR = ${SHELL} /home/plantier/Téléchargements/cinepaint-0.22-1/missing --run tar
AR = ar
AUTOCONF = ${SHELL} /home/plantier/Téléchargements/cinepaint-0.22-1/missing --run autoconf
AUTOHEADER = ${SHELL} /home/plantier/Téléchargements/cinepaint-0.22-1/missing --run autoheader
AUTOMAKE = ${SHELL} /home/plantier/Téléchargements/cinepaint-0.22-1/missing --run automake-1.9
AWK = gawk
BRACKETING = bracketing_to_hdr
CATALOGS = ca.gmo cs.gmo da.gmo de.gmo el.gmo en_GB.gmo es.gmo fi.gmo fr.gmo ga.gmo gl.gmo hu.gmo hr.gmo it.gmo ja.gmo ko.gmo lt.gmo nl.gmo nn.gmo no.gmo pl.gmo pt.gmo pt_BR.gmo ro.gmo ru.gmo sk.gmo sl.gmo sv.gmo tr.gmo uk.gmo zh_CN.gmo zh_TW.gmo
CATOBJEXT = .gmo
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2 -Wall
CINEPAINT_REMOTE = cinepaint-remote
COLLECT = collect
CPP = gcc -E
CPPFLAGS =
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DATADIRNAME = share
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DESKTOP_DIR = ${datarootdir}/applications
ECHO = echo
ECHO_C =
ECHO_N = -n
ECHO_T =
EGREP = /bin/grep -E
EXEEXT =
F77 =
FFLAGS =
FLTK_CFLAGS = -I/usr/include/freetype2 -g -D_THREAD_SAFE -D_REENTRANT
FLTK_CONFIG = /usr/bin/fltk-config
FLTK_LIBS = $(top_builddir)/lib/fl_i18n/libcinepaint_fl_i18n.la -Wl,-Bsymbolic-functions -lfltk_images -lfltk
GLIB_CONFIG =
GMOFILES = ca.gmo cs.gmo da.gmo de.gmo el.gmo en_GB.gmo es.gmo fi.gmo fr.gmo ga.gmo gl.gmo hu.gmo hr.gmo it.gmo ja.gmo ko.gmo lt.gmo nl.gmo nn.gmo no.gmo pl.gmo pt.gmo pt_BR.gmo ro.gmo ru.gmo sk.gmo sl.gmo sv.gmo tr.gmo uk.gmo zh_CN.gmo zh_TW.gmo
GMSGFMT = /usr/bin/msgfmt
GTK_CFLAGS = -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12
GTK_CONFIG =
GTK_LIBS = -pthread -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lm -lcairo -lpng12 -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0
ICC_EXAMIN = icc_examin
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
INSTOBJEXT = .mo
INTLLIBS =
IOL = iol
LCMS_CONFIG = /usr/bin/pkg-config lcms
LCMS_LIB = -llcms
LDFLAGS =
LIBJPEG_LIB = -ljpeg
LIBOBJS =
LIBPNG = -lpng12
LIBS =
LIBTIFF_LIB = -ltiff -ljpeg -lz
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LN_S = ln -s
LTLIBOBJS =
MAINT = #
MAINTAINER_MODE_FALSE =
MAINTAINER_MODE_TRUE = #
MAJOR_VERSION = 0
MAKEINFO = ${SHELL} /home/plantier/Téléchargements/cinepaint-0.22-1/missing --run makeinfo
MICRO_VERSION = 1
MINOR_VERSION = 22
MKINSTALLDIRS = ./mkinstalldirs
MSGFMT = /usr/bin/msgfmt
OBJEXT = o
OPENEXR =
OPENEXR_CONFIG = /usr/bin/pkg-config OpenEXR
OPENEXR_INCLUDES = -pthread -I/usr/include/OpenEXR
OPENEXR_LIBS = -pthread -lIlmImf -lz -lImath -lHalf -lIex -lIlmThread
OSX_ICC_EFFECT_PROFILE_PATH =
OSX_ICC_PROFILE_PATHS =
OYRANOS = 0.1.9
OYRANOS_CFLAGS = -DHAVE_OY -I/usr/include/oyranos
OYRANOS_LIBS = -DHAVE_OY usage:
/usr/bin/oyranos-config --version get official version
/usr/bin/oyranos-config --api-version get version of API
/usr/bin/oyranos-config --num-version get version as a simple number
/usr/bin/oyranos-config --cflags compiler flags
/usr/bin/oyranos-config --ldflags dynamic link flags
/usr/bin/oyranos-config --ldstaticflags static linking flags
/usr/bin/oyranos-config --syscolordir path to system main color directory
/usr/bin/oyranos-config --usercolordir path to users main color directory
/usr/bin/oyranos-config --iccdirname ICC profile directory name
/usr/bin/oyranos-config --settingsdirname Oyranos settings directory name
OY_CONFIG = /usr/bin/oyranos-config
PACKAGE = cinepaint
PACKAGE_BUGREPORT =
PACKAGE_NAME =
PACKAGE_STRING =
PACKAGE_TARNAME =
PACKAGE_VERSION =
PATH_SEPARATOR = :
PDF = pdf
PIXMAP_DIR = ${datarootdir}/pixmaps
PKG_CONFIG = /usr/bin/pkg-config
PNG_CONFIG = /usr/bin/pkg-config libpng
PNG_INCLUDES = -I/usr/include/libpng12
POFILES = ca.po cs.po da.po de.po el.po en_GB.po es.po fi.po fr.po ga.po gl.po hu.po hr.po it.po ja.po ko.po lt.po nl.po nn.po no.po pl.po pt.po pt_BR.po ro.po ru.po sk.po sl.po sv.po tr.po uk.po zh_CN.po zh_TW.po
POSUB = po
PO_IN_DATADIR_FALSE =
PO_IN_DATADIR_TRUE =
PRINT =
PRINT_CFLAGS =
PRINT_CONFIG =
PRINT_LIBS =
PYGIMP = pygimp
PYINCLUDE = -I/usr/include/python2.6 -I/usr/lib/python2.6/config
PYLIB = -L/usr/lib/python2.6/config
PYLINK = -lpython2.6
PYSCRIPT_INSTALL = %{_prefix}/lib/python2.6/site-packages
PYTHON = /usr/bin/python
PYTHON_EXEC_PREFIX = ${exec_prefix}
PYTHON_PLATFORM = linux2
PYTHON_PREFIX = ${prefix}
PYTHON_VERSION = 2.6
RANLIB = ranlib
RNH_VERSION = 28b01
RPMBUILD = :
SET_MAKE =
SHELL = /bin/bash
STATICLIBS_FALSE = #
STATICLIBS_TRUE =
STRIP = strip
THREAD_CFLAGS =
THREAD_LIBS = -lpthread
TIFF = tiff
USE_NLS = yes
USE_THREADS = -DUSE_THREADS
VERSION = 0.22-1
XGETTEXT = /usr/bin/xgettext
XMU_LIB = -lXmu -lXt -lSM -lICE
X_CFLAGS = -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12 -INONE/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12
X_LIBS = -pthread -pthread -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lm -lcairo -lpng12 -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_F77 =
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE =
am__fastdepCXX_FALSE = #
am__fastdepCXX_TRUE =
am__include = include
am__leading_dot = .
am__quote =
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
brushdata = 10x10squareBlurf16.gbr 10x10squaref16.gbr 11circlef16.gbr 11fcirclef16.gbr 13circlef16.gbr 13fcirclef16.gbr 15circlef16.gbr 15fcirclef16.gbr 17circlef16.gbr 17fcirclef16.gbr 19circlef16.gbr 19fcirclef16.gbr 1circlef16.gbr 20x20squareBlurf16.gbr 20x20squaref16.gbr 30x30twinklef16.gbr 3circlef16.gbr 3fcirclef16.gbr 5circlef16.gbr 5fcirclef16.gbr 5x5squareBlurf16.gbr 5x5squaref16.gbr 7circlef16.gbr 7fcirclef16.gbr 9circlef16.gbr 9fcirclef16.gbr NS1-Charcoal01.gbr NS1-Charcoal02.gbr NS1-Charcoal03.gbr NS1-Charcoal04.gbr NS1-Charcoal05.gbr NS1-Charcoal06.gbr NS1-Charcoal07.gbr NS1-Charcoal08.gbr NS1-Charcoal09.gbr NS1-Charcoal10.gbr NS1-Charcoal11.gbr NS1-Charcoal12.gbr NS1-Charcoal13.gbr NS1-Charcoal14.gbr NS1-Charcoal15.gbr NS1-Charcoal16.gbr NS1-Charcoal17.gbr NS1-Charcoal18.gbr NS1-Charcoal19.gbr NS1-Charcoal20.gbr NS1-Charcoal21.gbr NS1-Charcoal22.gbr NS1-Charcoal23.gbr NS1-Charcoal24.gbr NS1-Charcoal25.gbr NS1-Charcoal26.gbr NS1-Charcoal27.gbr NS1-Charcoal28.gbr NS1-Charcoal29.gbr NS1-Charcoal30.gbr NS1-Charcoal31.gbr NS1-Charcoal32.gbr NS1-Charcoal33.gbr NS1-Charcoal34.gbr NS1-Charcoal35.gbr NS1-Charcoal36.gbr NS1-Charcoal37.gbr NS1-Charcoal38.gbr NS1-Charcoal39.gbr NS1-Charcoal40.gbr NS1-Charcoal41.gbr NS1-Charcoal42.gbr NS1-Charcoal43.gbr NS1-Charcoal44.gbr NS1-Charcoal45.gbr NS1-Charcoal46.gbr NS1-Charcoal47.gbr NS1-Charcoal48.gbr NS1-Charcoal49.gbr NS1-Charcoal50.gbr NS1-Charcoal51.gbr NS1-Charcoal52.gbr NS1-Charcoal53.gbr NS1-Charcoal54.gbr NS1-Charcoal55.gbr NS1-Charcoal56.gbr NS1-Charcoal57.gbr NS1-Charcoal58.gbr NS1-Charcoal59.gbr NS1-Charcoal60.gbr NS1-Charcoal61.gbr NS1-Charcoal62.gbr NS1-Charcoal63.gbr NS1-Charcoal64.gbr NS1-Charcoal65.gbr SketchBrush-16.gih SketchBrush-32.gih SketchBrush-64.gih callig1f16.gbr callig2f16.gbr callig3f16.gbr callig4f16.gbr confettif16.gbr dunesf16.gbr feltpen.gih galaxy_bigf16.gbr galaxy_smallf16.gbr galaxyf16.gbr hsparks.gih pixelf16.gbr vine.gih
brushdatabig = NS1-Charcoal66.gbr NS1-Charcoal67.gbr NS1-Charcoal68.gbr NS1-Charcoal69.gbr NS1-Charcoal70.gbr NS1-Charcoal71.gbr NS1-Charcoal72.gbr NS1-Charcoal73.gbr NS1-Charcoal74.gbr NS1-Charcoal75.gbr
build = x86_64-unknown-linux
build_alias =
build_cpu = x86_64
build_os = linux
build_vendor = unknown
curvedata = D100ev0 DavidFmidtoneBoostA EV3-4.0 FG_baseline_conservative_v3 FG_baseline_v3 FG_ev3_v2 FG_ev3_v3 FG_ev3_v34 FG_ev5_v2 FG_ev5_v3 FG_point_and_shoot FG_point_and_shoot_conservative_v31 FG_point_and_shoot_conservative_v32 FG_point_and_shoot_v31 FG_point_and_shoot_v32 FG_provia_v3 FG_provia_v31 FG_provia_v32 FG_provia_v33 FG_provia_v34 FG_provia_v40 FG_white_wedding_v3 FG_white_wedding_v31 FG_white_wedding_v32 FG_white_wedding_v33 FG_white_wedding_v34 FG_white_wedding_v35 FGs_Provia_v34 FGs_White_Wedding_v35 Fotogenic_Provia_v3.3 Fuji_Astia Fuji_Superia_Reala JTs_All_In_One KGM_Agfa_Optima KGM_fotogenetic_ev3_v34_5 KGM_fotogenetic_ev3_v34_6 KGM_fotogenetic_ev3_v43 KGM_oldskools_mtb_v1_3 Klaus_1 Klaus_2 Klaus_3 OldSkoOLs_Midtone_Enhance_v3h OldSkoOLs_Normal_v2 OldSkoOLs_dlt OldSkoOLs_mte_v3.1 Oldskools_mte_v2.14d Oldskools_mte_v2.14h Oldskools_mte_v3 Oldskools_mte_v3h Optima2 Optimav1 P+S-4.0 Provia-4.0 README.curves Velvia astiav1 basic-curve_141 basic-curve_152 basic-curve_159 bh_filmcurve1 bh_filmcurve2 bright_2 bright_3 bright_4 courbeA courbeB curve039 curve114d custom_jt custom_jt1 custom_jt3 ev_0_custom ev_3_custom_normal ev_5_custom_normal ev_7_custom_contrast ev_7_custom_less ev_7_custom_normal henk1-03 jt_all-in-1Curve jt_all_around1-1-03 jt_auto jt_custom_color12-31-02 oldskools_mtb_v1 oldskools_mtc_v1 provia_d70 sReala sReala2 sReala_12 sReala_2alpha sReala_v2a_120505 sReala_version2 sRealav1 s_bright_1 s_bright_2 s_bright_3 s_bright_4 s_dark_1 s_dark_2 s_dark_3 s_dark_4 s_high s_low s_low_bright_3 s_low_bright_4 s_low_dark_3 s_low_dark_4 s_med v2 v2h v3 v3h v3hb
datadir = ${prefix}/share
exec_prefix = ${prefix}
gradientdata = Abstract_1 Abstract_2 Abstract_3 Aneurism Blinds Blue_Green Browns Brushed_Aluminium Burning_Paper Burning_Transparency CD CD_Half Caribbean_Blues Coffee Cold_Steel Cold_Steel_2 Crown_molding Danish_flag Dark_1 Deep_Sea Default Flare_Glow_Angular_1 Flare_Glow_Radial_1 Flare_Glow_Radial_2 Flare_Glow_Radial_3 Flare_Glow_Radial_4 Flare_Radial_101 Flare_Radial_102 Flare_Radial_103 Flare_Rays_Radial_1 Flare_Rays_Radial_2 Flare_Rays_Size_1 Flare_Sizefac_101 Four_bars French_flag French_flag_smooth Full_saturation_spectrum_CCW Full_saturation_spectrum_CW German_flag German_flag_smooth Golden Greens Horizon_1 Horizon_2 Incandescent Land_1 Land_and_Sea Metallic_Something Mexican_flag Mexican_flag_smooth Nauseating_Headache Neon_Cyan Neon_Green Neon_Yellow Pastel_Rainbow Pastels Purples Radial_Eyeball_Blue Radial_Eyeball_Brown Radial_Eyeball_Green Radial_Glow_1 Radial_Rainbow_Hoop Romanian_flag Romanian_flag_smooth Rounded_edge Shadows_1 Shadows_2 Shadows_3 Skyline Skyline_polluted Square_Wood_Frame Sunrise Three_bars_sin Tropical_Colors Tube_Red Wood_1 Wood_2 Yellow_Contrast Yellow_Orange
host = x86_64-unknown-linux
host_alias =
host_cpu = x86_64
host_os = linux
host_vendor = unknown
includedir = ${prefix}/include
infodir = ${prefix}/share/info
install_sh = /home/plantier/Téléchargements/cinepaint-0.22-1/install-sh
ioldata = colordifference.iol gradient.iol gradient2.iol gradient3.iol halfblack.iol halftrans.iol luma.iol lumakey.iol readme.txt
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = NONE/share/locale
localstatedir = ${prefix}/var
mandir = ${prefix}/share/man
mkdir_p = mkdir -p --
oldincludedir = /usr/include
palettedata = Bears Bgold Blues Borders Browns_And_Yellows Caramel Cascade China Coldfire Cool_Colors Cranes Dark_pastels Default Ega Firecode Gold GrayViolet Grayblue Grays Greens Hilite Kahki Lights Muted Named_Colors News3 Op2 Paintjet Pastels Plasma Reds Reds_And_Purples Royal Topographic Visibone Visibone2 Volcano Warm_Colors Web
patterndata = 3dgreen.pat Craters.pat Moonfoot.pat amethyst.pat bark.pat blue.pat bluegrid.pat bluesquares.pat blueweb.pat brick.pat burlap.pat burlwood.pat choc_swirl.pat corkboard.pat cracked.pat crinklepaper.pat electric.pat fibers.pat granite1.pat ground1.pat ice.pat java.pat leather.pat leaves.pat leopard.pat lightning.pat marble1.pat marble2.pat marble3.pat nops.pat paper.pat parque1.pat parque2.pat parque3.pat pastel.pat pine.pat pink_marble.pat pool.pat qube1.pat rain.pat recessed.pat redcube.pat rock.pat sky.pat slate.pat sm_squares.pat starfield.pat stone33.pat terra.pat walnut.pat warning.pat wood1.pat wood2.pat wood3.pat wood4.pat wood5.pat
pkgpyexecdir = ${pyexecdir}/cinepaint
pkgpythondir = ${pythondir}/cinepaint
platform =
precision = PRECISION_U16
prefix = /usr/local
program_transform_name = s,x,x,
programdatadir = ${datarootdir}/cinepaint/0.22-1
programdotdir = .cinepaint
programincludedir =
programplugindir = ${exec_prefix}/lib/cinepaint/0.22-1
programsysconfdir =
pyexecdir = ${exec_prefix}/lib/python2.6/site-packages
pythondir = ${prefix}/lib/python2.6/site-packages
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
subdirs = plug-ins/icc_examin/icc_examin
sysconfdir = ${prefix}/etc
target_alias =
SUBDIRS = libhalf lib libgimp plug-ins app po po-plug-ins po-script-fu data
bin_SCRIPTS = cinepainttool
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = cinepaint-gtk.pc
desktopdir = $(DESKTOP_DIR)
desktop_DATA = cinepaint.desktop
pixmapdir = $(PIXMAP_DIR)
pixmap_DATA = cinepaint.png
EXTRA_DIST = \
gtkrc \
rmshm.sh \
tips.txt \
ps-menurc \
cinepaint.1 \
cinepainttool.1 \
gtkrc.forest2 \
cinepaint.desktop \
cinepaint.png \
cinepaint.m4 \
cinepaint.spec \
cinepaint-gtk.pc \
printrc_user \
spot.splash.ppm \
spot.icon.xpm \
py-compile
programdata_DATA = spot.splash.ppm gimprc gimprc_user gtkrc tips.txt ps-menurc gtkrc.forest2 printrc_user
programdata_SCRIPTS = user_install
man_MANS = cinepaint.1 cinepainttool.1
m4datadir = $(datadir)/aclocal
m4data_DATA = cinepaint.m4
scriptdata =
RPMARCH = `rpmbuild --showrc | awk '/^build arch/ {print $$4}'`
all: all-recursive
.SUFFIXES:
am--refresh:
@:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
cd $(srcdir) && $(AUTOMAKE) --gnu \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: # $(am__configure_deps)
cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
user_install: $(top_builddir)/config.status $(srcdir)/user_install.in
cd $(top_builddir) && $(SHELL) ./config.status $@
gimprc: $(top_builddir)/config.status $(srcdir)/gimprc.in
cd $(top_builddir) && $(SHELL) ./config.status $@
gimprc_user: $(top_builddir)/config.status $(srcdir)/gimprc_user.in
cd $(top_builddir) && $(SHELL) ./config.status $@
cinepainttool: $(top_builddir)/config.status $(srcdir)/cinepainttool.in
cd $(top_builddir) && $(SHELL) ./config.status $@
cinepaint-gtk.pc: $(top_builddir)/config.status $(srcdir)/cinepaint-gtk.pc.in
cd $(top_builddir) && $(SHELL) ./config.status $@
cinepaint.spec: $(top_builddir)/config.status $(srcdir)/cinepaint.spec.in
cd $(top_builddir) && $(SHELL) ./config.status $@
install-binSCRIPTS: $(bin_SCRIPTS)
@$(NORMAL_INSTALL)
test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
@list='$(bin_SCRIPTS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
if test -f $$d$$p; then \
f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
echo " $(binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \
$(binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \
else :; fi; \
done
uninstall-binSCRIPTS:
@$(NORMAL_UNINSTALL)
@list='$(bin_SCRIPTS)'; for p in $$list; do \
f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
rm -f "$(DESTDIR)$(bindir)/$$f"; \
done
install-programdataSCRIPTS: $(programdata_SCRIPTS)
@$(NORMAL_INSTALL)
test -z "$(programdatadir)" || $(mkdir_p) "$(DESTDIR)$(programdatadir)"
@list='$(programdata_SCRIPTS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
if test -f $$d$$p; then \
f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
echo " $(programdataSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(programdatadir)/$$f'"; \
$(programdataSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(programdatadir)/$$f"; \
else :; fi; \
done
uninstall-programdataSCRIPTS:
@$(NORMAL_UNINSTALL)
@list='$(programdata_SCRIPTS)'; for p in $$list; do \
f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
echo " rm -f '$(DESTDIR)$(programdatadir)/$$f'"; \
rm -f "$(DESTDIR)$(programdatadir)/$$f"; \
done
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
uninstall-info-am:
install-man1: $(man1_MANS) $(man_MANS)
@$(NORMAL_INSTALL)
test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
for i in $$l2; do \
case "$$i" in \
*.1*) list="$$list $$i" ;; \
esac; \
done; \
for i in $$list; do \
if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
else file=$$i; fi; \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
case "$$ext" in \
1*) ;; \
*) ext='1' ;; \
esac; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed -e 's/^.*\///'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
done
uninstall-man1:
@$(NORMAL_UNINSTALL)
@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
for i in $$l2; do \
case "$$i" in \
*.1*) list="$$list $$i" ;; \
esac; \
done; \
for i in $$list; do \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
case "$$ext" in \
1*) ;; \
*) ext='1' ;; \
esac; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed -e 's/^.*\///'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
done
install-desktopDATA: $(desktop_DATA)
@$(NORMAL_INSTALL)
test -z "$(desktopdir)" || $(mkdir_p) "$(DESTDIR)$(desktopdir)"
@list='$(desktop_DATA)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(am__strip_dir) \
echo " $(desktopDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(desktopdir)/$$f'"; \
$(desktopDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(desktopdir)/$$f"; \
done
uninstall-desktopDATA:
@$(NORMAL_UNINSTALL)
@list='$(desktop_DATA)'; for p in $$list; do \
f=$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(desktopdir)/$$f'"; \
rm -f "$(DESTDIR)$(desktopdir)/$$f"; \
done
install-m4dataDATA: $(m4data_DATA)
@$(NORMAL_INSTALL)
test -z "$(m4datadir)" || $(mkdir_p) "$(DESTDIR)$(m4datadir)"
@list='$(m4data_DATA)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(am__strip_dir) \
echo " $(m4dataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(m4datadir)/$$f'"; \
$(m4dataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(m4datadir)/$$f"; \
done
uninstall-m4dataDATA:
@$(NORMAL_UNINSTALL)
@list='$(m4data_DATA)'; for p in $$list; do \
f=$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(m4datadir)/$$f'"; \
rm -f "$(DESTDIR)$(m4datadir)/$$f"; \
done
install-pixmapDATA: $(pixmap_DATA)
@$(NORMAL_INSTALL)
test -z "$(pixmapdir)" || $(mkdir_p) "$(DESTDIR)$(pixmapdir)"
@list='$(pixmap_DATA)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(am__strip_dir) \
echo " $(pixmapDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pixmapdir)/$$f'"; \
$(pixmapDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pixmapdir)/$$f"; \
done
uninstall-pixmapDATA:
@$(NORMAL_UNINSTALL)
@list='$(pixmap_DATA)'; for p in $$list; do \
f=$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(pixmapdir)/$$f'"; \
rm -f "$(DESTDIR)$(pixmapdir)/$$f"; \
done
install-pkgconfigDATA: $(pkgconfig_DATA)
@$(NORMAL_INSTALL)
test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)"
@list='$(pkgconfig_DATA)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(am__strip_dir) \
echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
$(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
done
uninstall-pkgconfigDATA:
@$(NORMAL_UNINSTALL)
@list='$(pkgconfig_DATA)'; for p in $$list; do \
f=$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
done
install-programdataDATA: $(programdata_DATA)
@$(NORMAL_INSTALL)
test -z "$(programdatadir)" || $(mkdir_p) "$(DESTDIR)$(programdatadir)"
@list='$(programdata_DATA)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(am__strip_dir) \
echo " $(programdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(programdatadir)/$$f'"; \
$(programdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(programdatadir)/$$f"; \
done
uninstall-programdataDATA:
@$(NORMAL_UNINSTALL)
@list='$(programdata_DATA)'; for p in $$list; do \
f=$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(programdatadir)/$$f'"; \
rm -f "$(DESTDIR)$(programdatadir)/$$f"; \
done
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(am__remove_distdir)
mkdir $(distdir)
$(mkdir_p) $(distdir)/. $(distdir)/lib $(distdir)/libgimp $(distdir)/po $(distdir)/po-plug-ins $(distdir)/po-script-fu
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(mkdir_p) "$(distdir)/$$subdir" \
|| exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$top_distdir" \
distdir="$$distdir/$$subdir" \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__remove_distdir)
dist dist-all: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir); chmod a+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& cd $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
distuninstallcheck:
@cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(SCRIPTS) $(MANS) $(DATA)
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(programdatadir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(pixmapdir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(programdatadir)"; do \
test -z "$$dir" || $(mkdir_p) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
info: info-recursive
info-am:
install-data-am: install-desktopDATA install-m4dataDATA install-man \
install-pixmapDATA install-pkgconfigDATA \
install-programdataDATA install-programdataSCRIPTS
install-exec-am: install-binSCRIPTS
install-info: install-info-recursive
install-man: install-man1
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-binSCRIPTS uninstall-desktopDATA \
uninstall-info-am uninstall-m4dataDATA uninstall-man \
uninstall-pixmapDATA uninstall-pkgconfigDATA \
uninstall-programdataDATA uninstall-programdataSCRIPTS
uninstall-info: uninstall-info-recursive
uninstall-man: uninstall-man1
.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
check-am clean clean-generic clean-libtool clean-recursive \
ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
dist-hook dist-shar dist-tarZ dist-zip distcheck distclean \
distclean-generic distclean-libtool distclean-recursive \
distclean-tags distcleancheck distdir distuninstallcheck dvi \
dvi-am html html-am info info-am install install-am \
install-binSCRIPTS install-data install-data-am \
install-desktopDATA install-exec install-exec-am install-info \
install-info-am install-m4dataDATA install-man install-man1 \
install-pixmapDATA install-pkgconfigDATA \
install-programdataDATA install-programdataSCRIPTS \
install-strip installcheck installcheck-am installdirs \
installdirs-am maintainer-clean maintainer-clean-generic \
maintainer-clean-recursive mostlyclean mostlyclean-generic \
mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
tags tags-recursive uninstall uninstall-am \
uninstall-binSCRIPTS uninstall-desktopDATA uninstall-info-am \
uninstall-m4dataDATA uninstall-man uninstall-man1 \
uninstall-pixmapDATA uninstall-pkgconfigDATA \
uninstall-programdataDATA uninstall-programdataSCRIPTS
.PHONY: files populate checkin release
files:
@files=`ls $(DISTFILES) 2> /dev/null`; for p in $$files; do \
echo $$p; \
done
@for subdir in $(SUBDIRS); do \
files=`cd $$subdir; $(MAKE) files | grep -v "make\[[1-9]\]"`; \
for file in $$files; do \
echo $$subdir/$$file; \
done; \
done
populate:
@echo "populating project"
@files=`$(MAKE) files | grep -v "make\[[1-9]\]"`; prcs populate -d cinepaint.prj $$files
checkin: populate
@echo "checking in project"
@prcs checkin
release:
$(MAKE) dist distdir=$(PACKAGE)`date +"%y%m%d"`
dist-hook:
mkdir -p $(PACKAGE)-$(VERSION)/data/brushes/big
for i in NS1-Charcoal66.gbr NS1-Charcoal67.gbr NS1-Charcoal68.gbr NS1-Charcoal69.gbr NS1-Charcoal70.gbr NS1-Charcoal71.gbr NS1-Charcoal72.gbr NS1-Charcoal73.gbr NS1-Charcoal74.gbr NS1-Charcoal75.gbr; do \
cp -p $(srcdir)/data/brushes/big/$$i $(PACKAGE)-$(VERSION)/data/brushes/big/; \
done
rpm: dist
mkdir -p rpmdir/BUILD \
rpmdir/SPECS \
rpmdir/SOURCES \
rpmdir/SRPMS \
rpmdir/RPMS/$(RPMARCH)
cp -f $(PACKAGE)-$(VERSION).tar.gz rpmdir/SOURCES
rpmbuild --clean -ba $(top_srcdir)/$(PACKAGE).spec --define "_topdir $$PWD/rpmdir"
@echo "============================================================"
@echo "Finished - the packages are in rpmdir/RPMS and rpmdir/SRPMS!"
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:merci.
Hors ligne