Pages : 1
#1 Le 22/01/2011, à 17:09
- montmirail25
[résolu] installation clé wifi elypse
Bonjour,
Je suis nouvel utilisateur de ubuntu (10.04) et je viens d'acheter une clé usb wifi de marque ELYPSE 300mbps pour pouvoir me connecter.
Dans les dossiers du cd fourni avec il y bien un dossier "linux" mais je ne vois pas comment installer la clé.
(j'ai essayé ndiswrapper mais il n'y a pas de fichier inf sur le cd)
Pouvez-vous m'aider ?
Dernière modification par montmirail25 (Le 01/02/2011, à 21:33)
Hors ligne
#2 Le 26/01/2011, à 19:46
- montmirail25
Re : [résolu] installation clé wifi elypse
help !
Hors ligne
#4 Le 26/01/2011, à 20:25
- montmirail25
Re : [résolu] installation clé wifi elypse
Bonjour,
Voila
Hors ligne
#6 Le 26/01/2011, à 20:42
- montmirail25
Re : [résolu] installation clé wifi elypse
Je suis pas super fort en Anglais mais si je comprend bien l'explication se trouve dans "built" sauf que même avec la notice sous le nez je capte pas tout ...
* README
*
* Ralink Tech Inc.
*
* http://www.ralinktech.com
*
=======================================================================
ModelName:
===========
RT2870 Wireless Lan Linux Driver
=======================================================================
Driver lName:
===========
rt2870.o/rt2870.ko
=======================================================================
Supporting Kernel:
===================
linux kernel 2.4 and 2.6 series.
Tested in Redhat 7.3 or later.
=======================================================================
Ralink Hardware:
===================
Ralink 802.11n Wireless LAN Card.
=======================================================================
Description:
=============
This is a linux device driver for Ralink RT2870 USB ABGN WLAN Card.
=======================================================================
Contents:
=============
Makefile : Makefile
*.c : c files
*.h : header files
=======================================================================
Features:
==========
This driver implements basic IEEE802.11. Infrastructure and adhoc mode with
open or shared or WPA-PSK or WPA2-PSK authentication method.
NONE, WEP, TKIP and AES encryption.
=======================================================================
Build Instructions:
====================
1> $tar -xvzf DPB_RT2870_Linux_STA_x.x.x.x.tgz
go to "./DPB_RT2870_Linux_STA_x.x.x.x" directory.
2> In Makefile
set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
define the linux kernel source include file path LINUX_SRC
modify to meet your need.
3> In os/linux/config.mk
define the GCC and LD of the target machine
define the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager or wpa_supplicant wext functions
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
=> #>cd wpa_supplicant-x.x
=> #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
** Build for being controlled by WpaSupplicant with Ralink Driver
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
=> #>cd wpa_supplicant-0.5.7
=> #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d
4> $make
# compile driver source code
# To fix "error: too few arguments to function ¡¥iwe_stream_add_event"
=> $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c
5> $cp RT2870STA.dat /etc/Wireless/RT2870STA/RT2870STA.dat
6> load driver, go to "os/linux/" directory.
#[kernel 2.4]
# $/sbin/insmod rt2870sta.o
# $/sbin/ifconfig ra0 inet YOUR_IP up
#[kernel 2.6]
# $/sbin/insmod rt2870sta.ko
# $/sbin/ifconfig ra0 inet YOUR_IP up
7> unload driver
$/sbin/ifconfig ra0 down
$/sbin/rmmod rt2870sta
=======================================================================
CONFIGURATION:
====================
RT2870 driver can be configured via following interfaces,
i.e. (i)"iwconfig" command, (ii)"iwpriv" command, (iii) configuration file
i) iwconfig comes with kernel.
ii) iwpriv usage, please refer to file "iwpriv_usage.txt" for details.
iii)modify configuration file "RT2870STA.dat" in /etc/Wireless/RT2870STA/RT2870STA.dat.
Configuration File : RT2870STA.dat
---------------------------------------
# Copy this file to /etc/Wireless/RT2870STA/RT2870STA.dat
# This file is a binary file and will be read on loading rt.o module.
#
# Use "vi RT2870STA.dat" to modify settings according to your need.
#
# 1.) set NetworkType to "Adhoc" for using Adhoc-mode, otherwise using Infrastructure
# 2.) set Channel to "0" for auto-select on Infrastructure mode
# 3.) set SSID for connecting to your Accss-point.
# 4.) AuthMode can be "WEPAUTO", "OPEN", "SHARED", "WPAPSK", "WPA2PSK", "WPANONE"
# 5.) EncrypType can be "NONE", "WEP", "TKIP", "AES"
# for more information refer to the Readme file.
#
#The word of "Default" must not be removed
Default
CountryRegion=5
CountryRegionABand=7
CountryCode=
SSID=Dennis2860AP
NetworkType=Infra
WirelessMode=9
Channel=0
BeaconPeriod=100
TxPower=100
BGProtection=0
TxPreamble=0
RTSThreshold=2347
FragThreshold=2346
TxBurst=1
WmmCapable=0
AckPolicy=0;0;0;0
AuthMode=OPEN
EncrypType=NONE
WPAPSK=
DefaultKeyID=1
Key1Type=0
Key1Str=
Key2Type=0
Key2Str=
Key3Type=0
Key3Str=
Key4Type=0
Key4Str=
PSMode=CAM
FastRoaming=0
RoamThreshold=70
HT_RDG=1
HT_EXTCHA=0
HT_OpMode=1
HT_MpduDensity=4
HT_BW=1
HT_AutoBA=1
HT_BADecline=0
HT_AMSDU=0
HT_BAWinSize=64
HT_GI=1
HT_MCS=33
HT_MIMOPSMode=3
EthConvertMode=
EthCloneMac=
IEEE80211H=0
TGnWifiTest=0
WirelessEvent=0
MeshId=MESH
MeshAutoLink=1
MeshAuthMode=OPEN
MeshEncrypType=NONE
MeshWPAKEY=
MeshDefaultkey=1
MeshWEPKEY=
CarrierDetect=0
-----------------------------------------------
*NOTE:
WMM parameters
WmmCapable Set it as 1 to turn on WMM Qos support
AckPolicy1~4 Ack policy which support normal Ack or no Ack
(AC_BK, AC_BE, AC_VI, AC_VO)
All WMM parameters do not support iwpriv command but ¡¥WmmCapable¡Š¡Š,
please store all parameter to RT2870STA.dat, and restart driver.
-----------------------------------------------
syntax is 'Param'='Value' and describes below.
@> CountryRegion=value
value
0: use 1 ~ 11 Channel
1: use 1 ~ 13 Channel
2: use 10 ~ 11 Channel
3: use 10 ~ 13 Channel
4: use 14 Channel
5: use 1 ~ 14 Channel
6: use 3 ~ 9 Channel
7: use 5 ~ 13 Channel
31: use 1 ~ 14 Channel (ch1-11:active scan, ch12-14 passive scan)
@> CountryRegionABand=value
value
0: use 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 Channel
1: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 Channel
2: use 36, 40, 44, 48, 52, 56, 60, 64 Channel
3: use 52, 56, 60, 64, 149, 153, 157, 161 Channel
4: use 149, 153, 157, 161, 165 Channel
5: use 149, 153, 157, 161 Channel
6: use 36, 40, 44, 48 Channel
7: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 Channel
8: use 52, 56, 60, 64 Channel
9: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165 Channel
10: use 36, 40, 44, 48, 149, 153, 157, 161, 165 Channel
11: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161 Channel
@> CountryCode=value
value
AG, AR, AW, AU, AT, BS, BB, BM, BR, BE, BG, CA, KY, CL, CN, CO, CR, CY, CZ, DK, DO, EC, SV, FI, FR, DE,
GR, GU, GT, HT, HN, HK, HU, IS, IN, ID, IE, IL, IT, JP, JO, LV, LI, LT, LU, MY, MT, MA, MX, NL, NZ, NO,
PE, PT, PL, RO, RU, SA, CS, SG, SK, SI, ZA, KR, ES, SE, CH, TW, TR, GB, UA, AE, US, VE
"" => using default setting: 2.4 G - ch 1~11; 5G - ch 52~64, 100~140, 149~165
@> SSID=value
value
0~z, 1~32 ascii characters.
@> WirelessMode=value
value
0: legacy 11b/g mixed
1: legacy 11B only
2: legacy 11A only //Not support in RfIcType=1(id=RFIC_5225) and RfIcType=2(id=RFIC_5325)
3: legacy 11a/b/g mixed //Not support in RfIcType=1(id=RFIC_5225) and RfIcType=2(id=RFIC_5325)
4: legacy 11G only
5: 11ABGN mixed
6: 11N only
7: 11GN mixed
8: 11AN mixed
9: 11BGN mixed
10: 11AGN mixed
@> Channel=value
value
depends on CountryRegion or CountryRegionABand
@> BGProtection=value
value
0: Auto
1: Always on
2: Always off
@> TxPreamble=value
value
0:Preamble Long
1:Preamble Short
2:Auto
@> RTSThreshold=value
value
1~2347
@> FragThreshold=value
value
256~2346
@> TxBurst=value
value
0: Disable
1: Enable
@> NetworkType=value
value
Infra: infrastructure mode
Adhoc: adhoc mode
@> AuthMode=value
value
OPEN For open system
SHARED For shared key system
WEPAUTO Auto switch between OPEN and SHARED
WPAPSK For WPA pre-shared key (Infra)
WPA2PSK For WPA2 pre-shared key (Infra)
WPANONE For WPA pre-shared key (Adhoc)
WPA Use WPA-Supplicant
WPA2 Use WPA-Supplicant
@> EncrypType=value
value
NONE For AuthMode=OPEN
WEP For AuthMode=OPEN or AuthMode=SHARED
TKIP For AuthMode=WPAPSK or WPA2PSK
AES For AuthMode=WPAPSK or WPA2PSK
@> DefaultKeyID=value
value
1~4
@> Key1=value
Key2=value
Key3=value
Key4=value
value
10 or 26 hexadecimal characters eg: 012345678
5 or 13 ascii characters eg: passd
(usage : "iwpriv" only)
@> Key1Type=vaule
Key2Type=value
Key3Type=vaule
Key4Type=vaule
value
0 hexadecimal type
1 assic type
(usage : reading profile only)
@> Key1Str=value
Key2Str=value
Key3Str=vaule
Key4Str=vaule
value
10 or 26 characters (key type=0)
5 or 13 characters (key type=1)
(usage : reading profile only)
@> WPAPSK=value
value
8~63 ASCII or
64 HEX characters
@> WmmCapable=value
value
0: Disable WMM
1: Enable WMM
@> PSMode=value
value
CAM Constantly Awake Mode
Max_PSP Max Power Savings
Fast_PSP Power Save Mode
@> FastRoaming=value
value
0 Disabled
1 Enabled
@> RoamThreshold=value
value
Positive Interger(dBm)
@> HT_RDG=value
value
0 Disabled
1 Enabled
@> HT_EXTCHA=value (Extended Channel Switch Announcement)
value
0 Below
1 Above
@> HT_OpMode=value
value
0 HT mixed format
1 HT greenfield format
@> HT_MpduDensity=value
value (based on 802.11n D2.0)
0: no restriction
1: 1/4 £gs
2: 1/2 £gs
3: 1 £gs
4: 2 £gs
5: 4 £gs
6: 8 £gs
7: 16 £gs
@> HT_BW=value
value
0 20MHz
1 40MHz
@> HT_AutoBA=value
value
0 Disabled
1 Enabled
@> HT_BADecline
value
0 Disabled
1 Enabled <Reject BA request from AP>
@> HT_AMSDU=value
value
0 Disabled
1 Enabled
@> HT_BAWinSize=value
value
1 ~ 64
@> HT_GI=value
value
0 long GI
1 short GI
@> HT_MCS=value
value
0 ~ 15
33: auto
@> HT_MIMOPSMode=value
value (based on 802.11n D2.0)
0 Static SM Power Save Mode
1 Dynamic SM Power Save Mode
2 Reserved
3 SM enabled
(not fully support yet)
@> EthConvertMode=value
value
dongle
clone
hybrid
@> EthCloneMac=value
value
xx:xx:xx:xx:xx:xx
@> IEEE80211H=value
value
0 Disabled
1 Enabled
@> TGnWifiTest=value
value
0 Disabled
1 Enabled
@> WirelessEvent=value
value
0 Disabled
1 Enabled <send custom wireless event>
@> MeshId=value
value
Length 1~32 ascii characters
@> MeshAutoLink=value
value
0 Disabled
1 Enabled
@> MeshAuthMode=value
value
OPEN For open system
WPANONE For WPA pre-shared key (Adhoc)
@> MeshEncrypType=value
value
NONE For MeshAuthMode=OPEN
WEP For MeshAuthMode=OPEN
TKIP For MeshAuthMode=WPANONE
AES For MeshAuthMode=WPANONE
@> MeshWPAKEY=value
value
8~63 ASCII or
64 HEX characters
@> MeshDefaultkey=value
value
1~4
@> MeshWEPKEY=value
value
10 or 26 characters
5 or 13 characters
@> CarrierDetect=value
value
0 Disabled
1 Enabled
MORE INFORMATION
=================================================================================
If you want for rt2870 driver to auto-load at boot time:
A) choose ra0 for first RT2870 WLAN card, ra1 for second RT2870 WLAN card, etc.
B) create(edit) 'ifcfg-ra0' file in /etc/sysconfig/network-scripts/,
edit( or add the line) in /etc/modules.conf:
alias ra0 rt2870sta
C) edit(create) the file /etc/sysconfig/network-scripts/ifcfg-ra0
DEVICE='ra0'
ONBOOT='yes'
NOTE:
if you use dhcp, add this line too .
BOOTPROTO='dhcp'
*D) To ease the Default Gateway setting,
add the line
GATEWAY=x.x.x.x
in /etc/sysconfig/network
=======================================================================
Dongle/Clone Features:
======================
A) Dongle mode:
Provides a 1-to-N MAC address mapping mechanism such that more than one PC behind the STA
can transparently connect to the AP.
B) Clone mode:
Provides a 1-to-1 MAC address mapping mechanism.
STA can use own MAC as SA MAC or
use user desired MAC as SA MAC or
use source MAC of first packet coming from wired device as SA MAC.
NOTE: In this mode, only the PC who own the specified MAC can connect to the AP.
C) Hybrid mode(Dongle+Clone):
Provides a 1-to-N MAC address mapping mechanism such that more than one PC behind the STA
can transparently connect to the AP.
STA can use own MAC as SA MAC or
use user desired MAC as SA MAC or
use source MAC of first packet coming from wired device as SA MAC.
D) Please refer to "Config STA to link as dongle mode..." in iwpriv_usage.txt for releated commands.
Hors ligne
#8 Le 31/01/2011, à 19:37
- montmirail25
Re : [résolu] installation clé wifi elypse
montmirail@montmirail-desktop:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=10.04
DISTRIB_CODENAME=lucid
DISTRIB_DESCRIPTION="Ubuntu 10.04.1 LTS"
montmirail@montmirail-desktop:~$ lsusb
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 046d:c051 Logitech, Inc. G3 (MX518) Optical Mouse
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
montmirail@montmirail-desktop:~$ lsmod
Module Size Used by
nls_utf8 1069 1
isofs 29250 1
binfmt_misc 6587 1
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
vga16fb 11385 0
vgastate 8961 1 vga16fb
snd_wavefront 33066 0
snd_cs4236 25514 0
snd_wss_lib 23410 2 snd_wavefront,snd_cs4236
snd_mpu401 5123 0
snd_cmipci 30437 2
snd_opl3_lib 8966 3 snd_wavefront,snd_cs4236,snd_cmipci
snd_hwdep 5412 2 snd_wavefront,snd_opl3_lib
snd_mpu401_uart 5617 4 snd_wavefront,snd_cs4236,snd_mpu401,snd_cmipci
snd_seq_dummy 1338 0
snd_intel8x0 25652 2
snd_ac97_codec 100646 1 snd_intel8x0
ac97_bus 1002 1 snd_ac97_codec
snd_seq_oss 26722 0
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_seq_midi 4557 0
snd_pcm 70694 6 snd_cs4236,snd_wss_lib,snd_cmipci,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_rawmidi 19056 3 snd_wavefront,snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
radeon 676897 3
ttm 49943 1 radeon
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
drm_kms_helper 29329 1 radeon
snd_timer 19098 4 snd_wss_lib,snd_opl3_lib,snd_pcm,snd_seq
snd_seq_device 5700 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
drm 162409 5 radeon,ttm,drm_kms_helper
ppdev 5259 0
ns558 3056 0
agpgart 31724 2 ttm,drm
i2c_algo_bit 5028 1 radeon
k8temp 3152 0
snd 54180 26 snd_wavefront,snd_cs4236,snd_wss_lib,snd_mpu401,snd_cmipci,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
gameport 9089 3 snd_cmipci,ns558
parport_pc 25962 1
asus_atk0110 9017 0
soundcore 6620 1 snd
i2c_nforce2 5199 0
snd_page_alloc 7076 3 snd_wss_lib,snd_intel8x0,snd_pcm
lp 7028 0
parport 32635 3 ppdev,parport_pc,lp
usbhid 36110 0
hid 67064 1 usbhid
ohci1394 26950 0
ieee1394 81181 1 ohci1394
floppy 53016 0
pata_amd 8766 1
sata_nv 19376 2
forcedeth 49556 0
montmirail@montmirail-desktop:~$ uname -r
2.6.32-28-generic
Dernière modification par montmirail25 (Le 31/01/2011, à 19:56)
Hors ligne
#10 Le 31/01/2011, à 19:56
- montmirail25
Re : [résolu] installation clé wifi elypse
désolé, je viens de la mettre, voila :
montmirail@montmirail-desktop:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=10.04
DISTRIB_CODENAME=lucid
DISTRIB_DESCRIPTION="Ubuntu 10.04.1 LTS"
montmirail@montmirail-desktop:~$ lsusb
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 046d:c051 Logitech, Inc. G3 (MX518) Optical Mouse
Bus 001 Device 004: ID 148f:3070 Ralink Technology, Corp.
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
montmirail@montmirail-desktop:~$ lsmod
Module Size Used by
rt2870sta 461811 0
arc4 1153 2
rt2800usb 31531 0
rt2x00usb 9703 1 rt2800usb
rt2x00lib 27509 2 rt2800usb,rt2x00usb
led_class 2864 1 rt2x00lib
mac80211 205402 2 rt2x00usb,rt2x00lib
cfg80211 126528 2 rt2x00lib,mac80211
crc_ccitt 1339 1 rt2800usb
nls_utf8 1069 1
isofs 29250 1
binfmt_misc 6587 1
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
vga16fb 11385 0
vgastate 8961 1 vga16fb
snd_wavefront 33066 0
snd_cs4236 25514 0
snd_wss_lib 23410 2 snd_wavefront,snd_cs4236
snd_mpu401 5123 0
snd_cmipci 30437 2
snd_opl3_lib 8966 3 snd_wavefront,snd_cs4236,snd_cmipci
snd_hwdep 5412 2 snd_wavefront,snd_opl3_lib
snd_mpu401_uart 5617 4 snd_wavefront,snd_cs4236,snd_mpu401,snd_cmipci
snd_seq_dummy 1338 0
snd_intel8x0 25652 2
snd_ac97_codec 100646 1 snd_intel8x0
ac97_bus 1002 1 snd_ac97_codec
snd_seq_oss 26722 0
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_seq_midi 4557 0
snd_pcm 70694 6 snd_cs4236,snd_wss_lib,snd_cmipci,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_rawmidi 19056 3 snd_wavefront,snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
radeon 676897 3
ttm 49943 1 radeon
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
drm_kms_helper 29329 1 radeon
snd_timer 19098 4 snd_wss_lib,snd_opl3_lib,snd_pcm,snd_seq
snd_seq_device 5700 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
drm 162409 5 radeon,ttm,drm_kms_helper
ppdev 5259 0
ns558 3056 0
agpgart 31724 2 ttm,drm
i2c_algo_bit 5028 1 radeon
k8temp 3152 0
snd 54180 26 snd_wavefront,snd_cs4236,snd_wss_lib,snd_mpu401,snd_cmipci,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
gameport 9089 3 snd_cmipci,ns558
parport_pc 25962 1
asus_atk0110 9017 0
soundcore 6620 1 snd
i2c_nforce2 5199 0
snd_page_alloc 7076 3 snd_wss_lib,snd_intel8x0,snd_pcm
lp 7028 0
parport 32635 3 ppdev,parport_pc,lp
usbhid 36110 0
hid 67064 1 usbhid
ohci1394 26950 0
ieee1394 81181 1 ohci1394
floppy 53016 0
pata_amd 8766 1
sata_nv 19376 2
forcedeth 49556 0
montmirail@montmirail-desktop:~$ uname -r
2.6.32-28-generic
Hors ligne
#11 Le 01/02/2011, à 19:08
- demonipuch
Re : [résolu] installation clé wifi elypse
Bonjour
Il va falloir compiler le pilote (ou module) pour votre carte wifi et l'installer sur votre système. Vous devrez utiliser un terminal. Si vous obtenez des messages d'erreur, copiez/collez les retours et ne passez pas à l'etape suivante.
Pour commencer il va falloir installer quelques utilitaires avant :
sudo apt-get install build-essential linux-headers-$(uname -r)Désactivez les modules wifi par défaut. Pour cela, il faut editer le fichier /etc/modprobe.d/blacklist.conf :
sudo gedit /etc/modprobe.d/blacklist.confAjoutez ces lignes à la fin du fichier, enregistrez puis fermez :
blacklist rt2800usb
blacklist rt2x00lib
blacklist rt2x00usbRedémarrez votre ordinateur puis téléchargez les pilotes USB RT2870USB(RT2870/RT2770) sur le site de Ralink. Enregistrez les dans le dossier /tmp.
Placez vous dans le dossier /tmp :
cd /tmp/Décompressez l'archive téléchargée 2010_0709_RT2870_Linux_STA_v2.4.0.1.tar.bz2 :
tar jxvf 2010_0709_RT2870_Linux_STA_v2.4.0.1.tar.bz2Allez dans le dossier 2010_0709_RT2870_Linux_STA_v2.4.0.1 :
cd 2010_0709_RT2870_Linux_STA_v2.4.0.1/Éditez le fichier config.mk contenu dans le dossier os/linux :
gedit os/linux/config.mkModifiez les lignes suivantes :
# Support Wpa_Supplicant
HAS_WPA_SUPPLICANT=y
# Support Native WpaSupplicant for Network Maganger
HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=yMaintenant vous allez compiler le module :
makeVous devriez avoir quelques chose qui ressemble à ca :
[...]
/tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/cmm_mac_usb.c:628: warning: passing argument 3 of 'RTMPAllocUsbBulkBufStruct' from incompatible pointer type
/tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/cmm_mac_usb.c:34: note: expected 'VOID **' but argument is of type 'UCHAR **'
CC [M] /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/rtusb_io.o
CC [M] /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/rtusb_bulk.o
CC [M] /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/rtusb_data.o
CC [M] /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/cmm_data_usb.o
CC [M] /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/ee_prom.o
CC [M] /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/rtmp_mcu.o
CC [M] /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/rtusb_dev_id.o
CC [M] /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../os/linux/rt_usb.o
CC [M] /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../os/linux/rt_usb_util.o
CC [M] /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../os/linux/usb_main_dev.o
LD [M] /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/rt2870sta.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/rt2870sta.mod.o
LD [M] /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/rt2870sta.ko
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.32-28-generic »Installez ensuite le pilote :
sudo make installVous devriez obtenir un résultat similaire :
make -C /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux -f Makefile.6 install
make[1]: Entering directory `/tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux'
rm -rf /etc/Wireless/RT2870STA
mkdir /etc/Wireless/RT2870STA
cp /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/RT2870STA.dat /etc/Wireless/RT2870STA/.
install -d /lib/modules/2.6.32-24-generic-pae/kernel/drivers/net/wireless/
install -m 644 -c rt2870sta.ko /lib/modules/2.6.32-24-generic-pae/kernel/drivers/net/wireless/
/sbin/depmod -a 2.6.32-24-generic-pae
make[1]: Leaving directory `/tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux'Configurez le pilote. Pour cela, éditez le fichier /etc/Wireless/RT2870STA/RT2870STA.dat :
sudo gedit /etc/Wireless/RT2870STA/RT2870STA.datModifiez les lignes suivantes :
SSID=valueRemplacez value par votre SSID (le "nom" du réseau wifi auquel vous vous connectez)
CountryCode=FRAuthMode=valueRemplacez value par le mode d'authentification de votre réseau wifi :
OPEN
SHARED
WEPAUTO
WPAPSK
WPA2PSK
WPANONE
WPA
WPA2
EncryptType=valueRemplacez value par le mode de chiffrement :
NONE pour AuthMode=OPEN
WEP pour AuthMode=OPEN ou SHARED
TKIP pour AuthMode=WPAPSK ou WPA2PSK
AES pour AuthMode=WPAPSK ou WPA2PSK
WPAPSK=valueRemplacez value par votre clé wifi
Il ne reste plus qu'à configurer votre connexion wifi avec Network Manager.
Hors ligne
#12 Le 01/02/2011, à 21:32
- montmirail25
Re : [résolu] installation clé wifi elypse
Bonsoir,
Une seule chose à dire, MERCI BEAUCOUP !!! ca marche nikel !!!
Bonne soirée !
Hors ligne