#1 Le 08/07/2006, à 18:51
- marcos
[Résolu] lecture des codes ISRC
Salut,
quelqu'un sait comment récupérer les codes ISRC des pistes d'un CD audio ?
merci
#2 Le 09/07/2006, à 12:56
- marcos71
Re : [Résolu] lecture des codes ISRC
bon, j'avance mais j'ai toujours pas la solution:
cdda2wav permet théoriquement de lire les codes ISRC.
voici le résultat de "cdda2wav -J" :
% cdda2wav -J
cdrom device (/dev/cdrw) is not of type generic SCSI. Setting interface to cooked_ioctl.
126976 bytes buffer memory requested, 4 buffers, 8 sectors
#Cdda2wav version 2.01.01a01_linux_2.6.12_i686_i686, real time sched., soundcard, libparanoia support
EnableCdda_cooked (CDIOCSETCDDA) is not available...
AUDIOtrack pre-emphasis copy-permitted tracktype channels
1-12 yes no audio 2
Table of Contents: total tracks:12, (total time 36:51.35)
1.( 3:22.71), 2.( 3:11.08), 3.( 3:09.22), 4.( 4:06.35), 5.( 2:27.19),
6.( 3:31.10), 7.( 3:21.21), 8.( 2:29.12), 9.( 3:37.07), 10.( 3:05.13),
11.( 2:32.16), 12.( 1:58.26)
Table of Contents: starting sectors
1.( 0), 2.( 15221), 3.( 29554), 4.( 43751), 5.( 62236),
6.( 73280), 7.( 89115), 8.( 104211), 9.( 115398), 10.( 131680),
11.( 145568), 12.( 156984), lead-out( 165860)
CDINDEX discid: Fh0K8k5zRoyDH1XqoPPsdsn9xqE-
CDDB discid: 0xa808a30c
CD-Text: not detected
CD-Extra: not detected
No media catalog number present.
scanning for ISRCs: 12 ...
EnableCdda_cooked (CDIOCSETCDDA) is not available...
EnableCdda_cooked (CDIOCSETCDDA) is not available...
index scan: 1...difference: TOC:with, subchannel:without preemphasis
correcting TOC...
index scan: 2...difference: TOC:with, subchannel:without preemphasis
correcting TOC...
index scan: 3...difference: TOC:with, subchannel:without preemphasis
correcting TOC...
index scan: 4...
track mismatch: 4, in-track subchannel: 5 (index 1, sector 62235)
difference: TOC:with, subchannel:without preemphasis
correcting TOC...
index scan: 5...
track mismatch: 5, in-track subchannel: 6 (index 1, sector 73279)
difference: TOC:with, subchannel:without preemphasis
correcting TOC...
index scan: 6...difference: TOC:with, subchannel:without preemphasis
correcting TOC...
index scan: 7...difference: TOC:with, subchannel:without preemphasis
correcting TOC...
index scan: 8...difference: TOC:with, subchannel:without preemphasis
correcting TOC...
index scan: 9...difference: TOC:with, subchannel:without preemphasis
correcting TOC...
index scan: 10...difference: TOC:with, subchannel:without preemphasis
correcting TOC...
index scan: 11...difference: TOC:with, subchannel:without preemphasis
correcting TOC...
index scan: 12...difference: TOC:with, subchannel:without preemphasis
correcting TOC...
EnableCdda_cooked (CDIOCSETCDDA) is not available...
EnableCdda_cooked (CDIOCSETCDDA) is not available...
EnableCdda_cooked (CDIOCSETCDDA) is not available...
cdda2wav semble essayer de lire les codes ISRC ("scanning for ISRCs: 12 ...") mais ne renvoie aucun résultat.
Je crois savoir que seuls certains lecteurs peuvent lire les codes ISRC;
Je me demande si ce n'est pas un problème de hardware.
Mais d'après le résultat de "cdrecord -prcap", mon lecteur peut lire les codes ISRC ("Does return CD ISRC information"):
% cdrecord -prcap
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
cdrecord: Warning: Running on Linux-2.6.15-23-386
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '/dev/cdrw'
devname: '/dev/cdrw'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
Using libscg version 'debian-0.8debian2'.
cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TOSHIBA '
Identifikation : 'DVD-ROM SD-R1002'
Revision : '1034'
Device seems to be: Generic mmc2 DVD-ROM.
Drive capabilities, per MMC-2 page 2A:
Does read CD-R media
Does write CD-R media
Does read CD-RW media
Does write CD-RW media
Does read DVD-ROM media
Does read DVD-R media
Does not write DVD-R media
Does not read DVD-RAM media
Does not write DVD-RAM media
Does support test writing
Does read Mode 2 Form 1 blocks
Does read Mode 2 Form 2 blocks
Does read digital audio blocks
Does restart non-streamed digital audio reads accurately
Does not support Buffer-Underrun-Free recording
Does read multi-session CDs
Does read fixed-packet CD media using Method 2
Does not read CD bar code
Does read R-W subcode information
Does not return R-W subcode de-interleaved and error-corrected
Does read raw P-W subcode data from lead in
Does return CD media catalog number
Does return CD ISRC information
Does support C2 error pointers
Does not deliver composite A/V data
Does play audio CDs
Number of volume control levels: 16
Does support individual volume control setting for each channel
Does support independent mute setting for each channel
Does not support digital output on port 1
Does support digital output on port 2
Does send digital data LSB-first
Does not set LRCK high for left-channel data
Does not have valid data on falling edge of clock
Length of data in BCLKs: 16
Loading mechanism type: tray
Does support ejection of CD via START/STOP command
Does not lock media on power up via prevent jumper
Does allow media to be locked in the drive via PREVENT/ALLOW command
Is not currently in a media-locked state
Does not support changing side of disk
Does not have load-empty-slot-in-changer feature
Does not support Individual Disk Present feature
Maximum read speed: 4233 kB/s (CD 24x, DVD 3x)
Current read speed: 1005 kB/s (CD 5x, DVD 0x)
Maximum write speed: 706 kB/s (CD 4x, DVD 0x)
Current write speed: 352 kB/s (CD 2x, DVD 0x)
Buffer size in KB: 2048
Copy management revision supported: 1
J'ai essayé avec un second lecteur plus récent, avec le même résultat...
Quelqu'un pourrait me mettre sur la bonne piste ?
D'autre part, j'aimerais bien savoir ce que signifie le message:
"EnableCdda_cooked (CDIOCSETCDDA) is not available..."
qui est renvoyé par cdda2wav.
merci encore
Hors ligne
#3 Le 29/07/2006, à 14:24
- marcos71
Re : [Résolu] lecture des codes ISRC
bon, plusieurs semaines après, je me permets de relancer la question, au cas où quelqu'un aurait une piste pour moi...
merci
Hors ligne
#4 Le 02/09/2006, à 18:15
- marcos71
Re : [Résolu] lecture des codes ISRC
Résolu !
mais comme j'ai créé le fil en "guest", sans me connecter, je ne peux pas modifier le titre ([Résolu])
si un admin pouvait le faire... merci
je disais donc: le pb est résolu, en utilisant cdrdao:
cdrdao read-toc cd.toc
les codes isrc sont (s'ils existent) écrits dans le fichier cd.toc
Hors ligne