avast AV refusé par Ubuntu

didier78 · Le 17/08/2011, à 19:29

Bonjour, je suis tout nouveau:) et j'ai fais mon installation aujourd'hui sur un Netbook samsung N150, installation OK, tout fonctionne:lol:, j'ai activé le par-feu et je demande s'il faut installer un AV type Avast, qui propose une version pour Ubuntu, j'ai tenté l'installation et à un moment donné Ubuntu 11 m'a recommandé d'arrêter le processus, un problème de paquets, j'ai besoin de vos lumières pour l'installation de logiciels " je comprends mal le principe", je précise que j'ai choisi de ne rien conserver,sur mon DD, de seven Starter, installe propre donc..Au plaisir de vous lire..Bonne fin de journée:)

Dernière modification par didier78 (Le 17/08/2011, à 19:31)

Beneludo · Le 17/08/2011, à 19:51

Salut,

Pas besoin d'antivirus, il y a peu de chance que tu sois infecté, peu de virus fonctionne sous GNU/Linux. Au pire il seront sur ton HD, tu pourras les transmettre par mail (involontairement bien sur) mais le temps que tu seras sous linux, ils seront inactif.

winux12 · Le 17/08/2011, à 19:52

ben pas d'antivirus, pour d'autres logiciels, tu as la logithèque, pour des infos sur ces logiciels tu as la doc

richard973 · Le 22/06/2012, à 12:49

Bonjour,
J'ai eu le même soucis que toi mais j'ai réussi a installé Avast avec ce script:

wget http://files.avast.com/files/linux/avast4workstation_1.3.0-2_i386.deb
sudo dpkg -i avast4workstation_1.3.0-2_i386.deb

Cela a fonctionné chez moi.
A+

Pacifick_FR42 · Le 22/06/2012, à 13:38

Les AV fonctionnant sous Linux fonctionne uniquement pour les partitions window$, il n'y a pas de virus sous Linux...
Le Firewall n'a pas ou peu d'utilité, la plupart des box assurent cette fonction.

Arnold59 · Le 16/08/2012, à 18:17

Bonjour,

Je viens d'installer Avast Linux Edition Familiale 1.3.0 sous Linux Ubuntu 12.04 afin de protégé les logiciels de messageries car je ne veux pas infecté mes contacts qui utilisent Microsoft & Apple.

A l'origine j'avais ClamAV mais impossible de mettre à jour les définitions de virus via l'interface ClamTK
- main.cvd
- safebrowsing
- bytecode.cvd
- daily.cvd

C'est pourquoi en attendant de trouver la solution, j'ai installé Avast Linux 1.3.0:

installé depuis le paquetage .deb : avast4workstation_1.3.0-2_i386.deb récupéré sur le site de Avast :
http://www.avast.com/fr-fr/linux-home-edition

Le lancement a réussi jusqu'à la mise à jour de la définition des virus :

Mode console :
cd /

avast
Couldn't find a registration key in ~/.avast/avastrc file!
Please register avast! at http://www.avast.com/i_kat_207.php?lang=ENG
to get the key.
NOTE: if avast! rejects the key, remove ~/.avast/avastrc file and
run this script again with a valid key.

Please enter the key here:

--> Il suffit de s'enregistrer selon Avast :
http://www.avast.com/registration-free-antivirus.php?

Plantage après mise à jour de la définition virus :

/home/"user"/.avast 
ls
400.vps  avastrc  chest  log

vi  avastrc 

[licence]
key= XXXXX-XX-XXXXX
[windows]
[windows/mainframe]
maximized=0
width=560
height=569

Voici le lien direct afin de récupérer la dernière version de 400.vps.
http://files.avast.com/files/latest/400.vps

D'avance merci

Dernière modification par Arnold59 (Le 16/08/2012, à 19:09)

compte supprimé · Le 16/08/2012, à 18:41

Ça n'a pas grand intérêt ! Sous linux pas besoin, et sous windows, il faut être inconscient pour ne pas avoir d'anti-virus... Et je pense que tout le monde en a un... Donc si par hasard tu transmettais un virus, il serait intercepté par le destinataire... Et s'il n'y arrive pas, tu n'y arriveras pas davantage (parce la version linux d'avast sera probablement moins à jour que celle de windows)...

Dernière modification par faustus (Le 16/08/2012, à 18:42)

Korak · Le 16/08/2012, à 18:58

Bonjour,

Arnold59 a écrit :

A l'origine j'avais ClamAV mais impossible de mettre à jour les définitions de virus via l'interface ClamTK

Juste pour info:

Il faut installer le paquet "clamav-freshclam" via Synaptic pour que les mises-à-jour de Clamav se fasse.

Pour ma part, j'ai les paquets:

- clamav.
- clamav-base.
- clamav-deamon.
- clamav-freshclam.
- clamav-milter.
- clamav-testfiles.
- clamtk.
- libclamv6.
- libclamunrar6.

Installés sur mon PC.

Arnold59 · Le 16/08/2012, à 19:11

Merci,

Coté Avast j'ai résolu le pb lié à la clé .

Et un problème résolu selon la documentation Ubuntu :
http://doc.ubuntu-fr.org/avast#probleme … et_resolus

sudo sysctl -w kernel.shmmax=104857600

Quant à ClamAv rien ne se met à jour automatiquement lors du chargement, j'ai réinstaller proprement les paquetages mais les mises à jour ne sont pas à jour et de ton coté ils le sont ?

D'avance merci

Dernière modification par Arnold59 (Le 16/08/2012, à 21:17)

Korak · Le 16/08/2012, à 19:26

Dis-toi bien que ClamAV n'a une mise-à-jour que tout les x temps sous unbuntu.

Genre tout les trois mois si pas plus.

Arnold59 · Le 16/08/2012, à 20:41

Je ne parle pas de la mise à jour du programme Clamav mais des définitions virus :
main.cvd
- safebrowsing
- bytecode.cvd
- daily.cvd

je viens de faire un freshclam :

session utilisateur :
freshclam -update

ERROR: Please edit the example config file /usr/local/etc/freshclam.conf
ERROR: Can't open/parse the config file /usr/local/etc/freshclam.conf

Egalement l'interface ClamTK 4.41 est installé mais impossible de mettre à jour les définitions ?

Lancement de clamtk en tant que root :

clamtk
note: (re)creating prefs file.
WARNING **: La connexion est fermée at /usr/share/perl5/ClamTk/GUI.pm line 107.
WARNING **: Unable to create Ubuntu Menu Proxy: La connexion est fermée at /usr/share/perl5/ClamTk/GUI.pm line 650.

(clamtk:19924): LIBDBUSMENU-GLIB-WARNING **: Unable to get session bus: La connexion est fermée

Voici le contenu de freshclam.conf

##
## Example config file for freshclam
## Please read the freshclam.conf(5) manual before editing this file.
##


# Comment or remove the line below.
Example

# Path to the database directory.
# WARNING: It must match clamd.conf's directive!
# Default: hardcoded (depends on installation options)
DatabaseDirectory /var/lib/clamav

# Path to the log file (make sure it has proper permissions)
# Default: disabled
UpdateLogFile /var/log/freshclam.log

# Maximum size of the log file.
# Value of 0 disables the limit.
# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes).
# in bytes just don't use modifiers.
# Default: 1M
#LogFileMaxSize 2M

# Log time with each message.
# Default: no
#LogTime yes

# Enable verbose logging.
# Default: no
#LogVerbose yes

# Use system logger (can work together with UpdateLogFile).
# Default: no
#LogSyslog yes

# Specify the type of syslog messages - please refer to 'man syslog'
# for facility names.
# Default: LOG_LOCAL6
#LogFacility LOG_MAIL

# This option allows you to save the process identifier of the daemon
# Default: disabled
#PidFile /var/run/freshclam.pid

# By default when started freshclam drops privileges and switches to the
# "clamav" user. This directive allows you to change the database owner.
# Default: clamav (may depend on installation options)
#DatabaseOwner clamav

# Initialize supplementary group access (freshclam must be started by root).
# Default: no
#AllowSupplementaryGroups yes

# Use DNS to verify virus database version. Freshclam uses DNS TXT records
# to verify database and software versions. With this directive you can change
# the database verification domain.
# WARNING: Do not touch it unless you're configuring freshclam to use your
# own database verification domain.
# Default: current.cvd.clamav.net
#DNSDatabaseInfo current.cvd.clamav.net

# Uncomment the following line and replace XY with your country
# code. See http://www.iana.org/cctld/cctld-whois.htm for the full list.
# You can use db.XY.ipv6.clamav.net for IPv6 connections.
#DatabaseMirror db.XY.clamav.net

# database.clamav.net is a round-robin record which points to our most 
# reliable mirrors. It's used as a fall back in case db.XY.clamav.net is 
# not working. DO NOT TOUCH the following line unless you know what you
# are doing.
DatabaseMirror database.clamav.net

# How many attempts to make before giving up.
# Default: 3 (per mirror)
#MaxAttempts 5

# With this option you can control scripted updates. It's highly recommended
# to keep it enabled.
# Default: yes
#ScriptedUpdates yes

# By default freshclam will keep the local databases (.cld) uncompressed to
# make their handling faster. With this option you can enable the compression;
# the change will take effect with the next database update.
# Default: no
#CompressLocalDatabase no

# With this option you can provide custom sources (http:// or file://) for
# database files. This option can be used multiple times.
# Default: no custom URLs
#DatabaseCustomURL http://myserver.com/mysigs.ndb
#DatabaseCustomURL file:///mnt/nfs/local.hdb

# Number of database checks per day.
# Default: 12 (every two hours)
#Checks 24

# Proxy settings
# Default: disabled
#HTTPProxyServer myproxy.com
#HTTPProxyPort 1234
#HTTPProxyUsername myusername
#HTTPProxyPassword mypass

# If your servers are behind a firewall/proxy which applies User-Agent
# filtering you can use this option to force the use of a different
# User-Agent header.
# Default: clamav/version_number
#HTTPUserAgent SomeUserAgentIdString

# Use aaa.bbb.ccc.ddd as client address for downloading databases. Useful for
# multi-homed systems.
# Default: Use OS'es default outgoing IP address.
#LocalIPAddress aaa.bbb.ccc.ddd

# Send the RELOAD command to clamd.
# Default: no
#NotifyClamd /path/to/clamd.conf

# Run command after successful database update.
# Default: disabled
#OnUpdateExecute command

# Run command when database update process fails.
# Default: disabled
#OnErrorExecute command

# Run command when freshclam reports outdated version.
# In the command string %v will be replaced by the new version number.
# Default: disabled
#OnOutdatedExecute command

# Don't fork into background.
# Default: no
#Foreground yes

# Enable debug messages in libclamav.
# Default: no
#Debug yes

# Timeout in seconds when connecting to database server.
# Default: 30
#ConnectTimeout 60

# Timeout in seconds when reading from database server.
# Default: 30
#ReceiveTimeout 60

# With this option enabled, freshclam will attempt to load new
# databases into memory to make sure they are properly handled
# by libclamav before replacing the old ones.
# Default: yes
#TestDatabases yes

# When enabled freshclam will submit statistics to the ClamAV Project about
# the latest virus detections in your environment. The ClamAV maintainers
# will then use this data to determine what types of malware are the most
# detected in the field and in what geographic area they are.
# Freshclam will connect to clamd in order to get recent statistics.
# Default: no
#SubmitDetectionStats /path/to/clamd.conf

# Country of origin of malware/detection statistics (for statistical
# purposes only). The statistics collector at ClamAV.net will look up
# your IP address to determine the geographical origin of the malware
# reported by your installation. If this installation is mainly used to
# scan data which comes from a different location, please enable this
# option and enter a two-letter code (see http://www.iana.org/domains/root/db/)
# of the country of origin.
# Default: disabled
#DetectionStatsCountry country-code

# This option enables support for our "Personal Statistics" service. 
# When this option is enabled, the information on malware detected by
# your clamd installation is made available to you through our website.
# To get your HostID, log on http://www.stats.clamav.net and add a new
# host to your host list. Once you have the HostID, uncomment this option
# and paste the HostID here. As soon as your freshclam starts submitting
# information to our stats collecting service, you will be able to view
# the statistics of this clamd installation by logging into
# http://www.stats.clamav.net with the same credentials you used to
# generate the HostID. For more information refer to:
# http://www.clamav.net/support/faq/faq-cctts/
# This feature requires SubmitDetectionStats to be enabled.
# Default: disabled
#DetectionStatsHostID unique-id

# This option enables support for Google Safe Browsing. When activated for
# the first time, freshclam will download a new database file (safebrowsing.cvd)
# which will be automatically loaded by clamd and clamscan during the next
# reload, provided that the heuristic phishing detection is turned on. This
# database includes information about websites that may be phishing sites or
# possible sources of malware. When using this option, it's mandatory to run
# freshclam at least every 30 minutes.
# Freshclam uses the ClamAV's mirror infrastructure to distribute the
# database and its updates but all the contents are provided under Google's
# terms of use. See http://code.google.com/support/bin/answer.py?answer=70015
# and http://safebrowsing.clamav.net for more information.
# Default: disabled
SafeBrowsing yes

# This option enables downloading of bytecode.cvd, which includes additional
# detection mechanisms and improvements to the ClamAV engine.
# Default: enabled
Bytecode yes

Egalement : présence de /usr/local/etc/clamd.conf

##
## Example config file for the Clam AV daemon
## Please read the clamd.conf(5) manual before editing this file.
##


# Comment or remove the line below.
Example

# Uncomment this option to enable logging.
# LogFile must be writable for the user running daemon.
# A full path is required.
# Default: disabled
#LogFile /tmp/clamd.log

# By default the log file is locked for writing - the lock protects against
# running clamd multiple times (if want to run another clamd, please
# copy the configuration file, change the LogFile variable, and run
# the daemon with --config-file option).
# This option disables log file locking.
# Default: no
#LogFileUnlock yes

# Maximum size of the log file.
# Value of 0 disables the limit.
# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). To specify the size
# in bytes just don't use modifiers.
# Default: 1M
#LogFileMaxSize 2M

# Log time with each message.
# Default: no
#LogTime yes

# Also log clean files. Useful in debugging but drastically increases the
# log size.
# Default: no
#LogClean yes

# Use system logger (can work together with LogFile).
# Default: no
#LogSyslog yes

# Specify the type of syslog messages - please refer to 'man syslog'
# for facility names.
# Default: LOG_LOCAL6
#LogFacility LOG_MAIL

# Enable verbose logging.
# Default: no
#LogVerbose yes

# Log additional information about the infected file, such as its
# size and hash, together with the virus name.
#ExtendedDetectionInfo yes

# This option allows you to save a process identifier of the listening
# daemon (main thread).
# Default: disabled
#PidFile /var/run/clamd.pid

# Optional path to the global temporary directory.
# Default: system specific (usually /tmp or /var/tmp).
#TemporaryDirectory /var/tmp

# Path to the database directory.
# Default: hardcoded (depends on installation options)
#DatabaseDirectory /var/lib/clamav

# Only load the official signatures published by the ClamAV project.
# Default: no
#OfficialDatabaseOnly no

# The daemon can work in local mode, network mode or both. 
# Due to security reasons we recommend the local mode.

# Path to a local socket file the daemon will listen on.
# Default: disabled (must be specified by a user)
#LocalSocket /tmp/clamd.socket

# Sets the group ownership on the unix socket.
# Default: disabled (the primary group of the user running clamd)
#LocalSocketGroup virusgroup

# Sets the permissions on the unix socket to the specified mode.
# Default: disabled (socket is world accessible)
#LocalSocketMode 660

# Remove stale socket after unclean shutdown.
# Default: yes
#FixStaleSocket yes

# TCP port address.
# Default: no
#TCPSocket 3310

# TCP address.
# By default we bind to INADDR_ANY, probably not wise.
# Enable the following to provide some degree of protection
# from the outside world.
# Default: no
#TCPAddr 127.0.0.1

# Maximum length the queue of pending connections may grow to.
# Default: 200
#MaxConnectionQueueLength 30

# Clamd uses FTP-like protocol to receive data from remote clients.
# If you are using clamav-milter to balance load between remote clamd daemons
# on firewall servers you may need to tune the options below.

# Close the connection when the data size limit is exceeded.
# The value should match your MTA's limit for a maximum attachment size.
# Default: 25M
#StreamMaxLength 10M

# Limit port range.
# Default: 1024
#StreamMinPort 30000
# Default: 2048
#StreamMaxPort 32000

# Maximum number of threads running at the same time.
# Default: 10
#MaxThreads 20

# Waiting for data from a client socket will timeout after this time (seconds).
# Default: 120
#ReadTimeout 300

# This option specifies the time (in seconds) after which clamd should
# timeout if a client doesn't provide any initial command after connecting.
# Default: 5
#CommandReadTimeout 5

# This option specifies how long to wait (in miliseconds) if the send buffer is full.
# Keep this value low to prevent clamd hanging
#
# Default: 500
#SendBufTimeout 200

# Maximum number of queued items (including those being processed by MaxThreads threads)
# It is recommended to have this value at least twice MaxThreads if possible.
# WARNING: you shouldn't increase this too much to avoid running out  of file descriptors,
# the following condition should hold:
# MaxThreads*MaxRecursion + (MaxQueue - MaxThreads) + 6< RLIMIT_NOFILE (usual max is 1024)
#
# Default: 100
#MaxQueue 200

# Waiting for a new job will timeout after this time (seconds).
# Default: 30
#IdleTimeout 60

# Don't scan files and directories matching regex
# This directive can be used multiple times
# Default: scan all
#ExcludePath ^/proc/
#ExcludePath ^/sys/

# Maximum depth directories are scanned at.
# Default: 15
#MaxDirectoryRecursion 20

# Follow directory symlinks.
# Default: no
#FollowDirectorySymlinks yes

# Follow regular file symlinks.
# Default: no
#FollowFileSymlinks yes

# Scan files and directories on other filesystems.
# Default: yes
#CrossFilesystems yes

# Perform a database check.
# Default: 600 (10 min)
#SelfCheck 600

# Execute a command when virus is found. In the command string %v will
# be replaced with the virus name.
# Default: no
#VirusEvent /usr/local/bin/send_sms 123456789 "VIRUS ALERT: %v"

# Run as another user (clamd must be started by root for this option to work)
# Default: don't drop privileges
#User clamav

# Initialize supplementary group access (clamd must be started by root).
# Default: no
#AllowSupplementaryGroups no

# Stop daemon when libclamav reports out of memory condition.
#ExitOnOOM yes

# Don't fork into background.
# Default: no
#Foreground yes

# Enable debug messages in libclamav.
# Default: no
#Debug yes

# Do not remove temporary files (for debug purposes).
# Default: no
#LeaveTemporaryFiles yes

# Detect Possibly Unwanted Applications.
# Default: no
#DetectPUA yes

# Exclude a specific PUA category. This directive can be used multiple times.
# See http://www.clamav.net/support/pua for the complete list of PUA
# categories.
# Default: Load all categories (if DetectPUA is activated)
#ExcludePUA NetTool
#ExcludePUA PWTool

# Only include a specific PUA category. This directive can be used multiple
# times.
# Default: Load all categories (if DetectPUA is activated)
#IncludePUA Spy
#IncludePUA Scanner
#IncludePUA RAT

# In some cases (eg. complex malware, exploits in graphic files, and others),
# ClamAV uses special algorithms to provide accurate detection. This option
# controls the algorithmic detection.
# Default: yes
#AlgorithmicDetection yes


##
## Executable files
##

# PE stands for Portable Executable - it's an executable file format used
# in all 32 and 64-bit versions of Windows operating systems. This option allows
# ClamAV to perform a deeper analysis of executable files and it's also
# required for decompression of popular executable packers such as UPX, FSG,
# and Petite.
# Default: yes
#ScanPE yes

# Executable and Linking Format is a standard format for UN*X executables.
# This option allows you to control the scanning of ELF files.
# Default: yes
#ScanELF yes

# With this option clamav will try to detect broken executables (both PE and
# ELF) and mark them as Broken.Executable.
# Default: no
#DetectBrokenExecutables yes


##
## Documents
##

# This option enables scanning of OLE2 files, such as Microsoft Office
# documents and .msi files.
# Default: yes
#ScanOLE2 yes


# With this option enabled OLE2 files with VBA macros, which were not
# detected by signatures will be marked as "Heuristics.OLE2.ContainsMacros".
# Default: no
#OLE2BlockMacros no

# This option enables scanning within PDF files.
# Default: yes
#ScanPDF yes


##
## Mail files
##

# Enable internal e-mail scanner.
# Default: yes
#ScanMail yes

# Scan RFC1341 messages split over many emails.
# You will need to periodically clean up $TemporaryDirectory/clamav-partial directory.
# WARNING: This option may open your system to a DoS attack.
#	   Never use it on loaded servers.
# Default: no
#ScanPartialMessages yes


# With this option enabled ClamAV will try to detect phishing attempts by using
# signatures.
# Default: yes
#PhishingSignatures yes

# Scan URLs found in mails for phishing attempts using heuristics.
# Default: yes
#PhishingScanURLs yes

# Always block SSL mismatches in URLs, even if the URL isn't in the database.
# This can lead to false positives.
#
# Default: no
#PhishingAlwaysBlockSSLMismatch no

# Always block cloaked URLs, even if URL isn't in database.
# This can lead to false positives.
#
# Default: no
#PhishingAlwaysBlockCloak no

# Allow heuristic match to take precedence.
# When enabled, if a heuristic scan (such as phishingScan) detects
# a possible virus/phish it will stop scan immediately. Recommended, saves CPU
# scan-time.
# When disabled, virus/phish detected by heuristic scans will be reported only at
# the end of a scan. If an archive contains both a heuristically detected
# virus/phish, and a real malware, the real malware will be reported
#
# Keep this disabled if you intend to handle "*.Heuristics.*" viruses 
# differently from "real" malware.
# If a non-heuristically-detected virus (signature-based) is found first, 
# the scan is interrupted immediately, regardless of this config option.
#
# Default: no
#HeuristicScanPrecedence yes

##
## Data Loss Prevention (DLP)
##

# Enable the DLP module
# Default: No
#StructuredDataDetection yes

# This option sets the lowest number of Credit Card numbers found in a file
# to generate a detect.
# Default: 3
#StructuredMinCreditCardCount 5

# This option sets the lowest number of Social Security Numbers found
# in a file to generate a detect.
# Default: 3
#StructuredMinSSNCount 5

# With this option enabled the DLP module will search for valid
# SSNs formatted as xxx-yy-zzzz
# Default: yes
#StructuredSSNFormatNormal yes

# With this option enabled the DLP module will search for valid
# SSNs formatted as xxxyyzzzz
# Default: no
#StructuredSSNFormatStripped yes


##
## HTML
##

# Perform HTML normalisation and decryption of MS Script Encoder code.
# Default: yes
#ScanHTML yes


##
## Archives
##

# ClamAV can scan within archives and compressed files.
# Default: yes
#ScanArchive yes

# Mark encrypted archives as viruses (Encrypted.Zip, Encrypted.RAR).
# Default: no
#ArchiveBlockEncrypted no


##
## Limits
##

# The options below protect your system against Denial of Service attacks
# using archive bombs.

# This option sets the maximum amount of data to be scanned for each input file.
# Archives and other containers are recursively extracted and scanned up to this
# value.
# Value of 0 disables the limit
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 100M
#MaxScanSize 150M

# Files larger than this limit won't be scanned. Affects the input file itself
# as well as files contained inside it (when the input file is an archive, a
# document or some other kind of container).
# Value of 0 disables the limit.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 25M
#MaxFileSize 30M

# Nested archives are scanned recursively, e.g. if a Zip archive contains a RAR
# file, all files within it will also be scanned. This options specifies how
# deeply the process should be continued.
# Note: setting this limit too high may result in severe damage to the system.
# Default: 16
#MaxRecursion 10

# Number of files to be scanned within an archive, a document, or any other
# container file.
# Value of 0 disables the limit.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 10000
#MaxFiles 15000


##
## Clamuko settings
##

# Enable Clamuko. Dazuko must be configured and running. Clamuko supports
# both Dazuko (/dev/dazuko) and DazukoFS (/dev/dazukofs.ctrl). DazukoFS
# is the preferred option. For more information please visit www.dazuko.org
# Default: no
#ClamukoScanOnAccess yes

# The number of scanner threads that will be started (DazukoFS only).
# Having multiple scanner threads allows Clamuko to serve multiple
# processes simultaneously. This is particularly beneficial on SMP machines.
# Default: 3
#ClamukoScannerCount 3

# Don't scan files larger than ClamukoMaxFileSize
# Value of 0 disables the limit.
# Default: 5M
#ClamukoMaxFileSize 10M

# Set access mask for Clamuko (Dazuko only).
# Default: no
#ClamukoScanOnOpen yes
#ClamukoScanOnClose yes
#ClamukoScanOnExec yes

# Set the include paths (all files inside them will be scanned). You can have
# multiple ClamukoIncludePath directives but each directory must be added
# in a seperate line. (Dazuko only)
# Default: disabled
#ClamukoIncludePath /home
#ClamukoIncludePath /students

# Set the exclude paths. All subdirectories are also excluded. (Dazuko only)
# Default: disabled
#ClamukoExcludePath /home/bofh

# With this option you can whitelist specific UIDs. Processes with these UIDs
# will be able to access all files.
# This option can be used multiple times (one per line).
# Default: disabled
#ClamukoExcludeUID 0

# With this option enabled ClamAV will load bytecode from the database. 
# It is highly recommended you keep this option on, otherwise you'll miss detections for many new viruses.
# Default: yes
#Bytecode yes

# Set bytecode security level.
# Possible values:
#       None - no security at all, meant for debugging. DO NOT USE THIS ON PRODUCTION SYSTEMS
#         This value is only available if clamav was built with --enable-debug!
#       TrustSigned - trust bytecode loaded from signed .c[lv]d files,
#                insert runtime safety checks for bytecode loaded from other sources
#       Paranoid - don't trust any bytecode, insert runtime checks for all
# Recommended: TrustSigned, because bytecode in .cvd files already has these checks
# Note that by default only signed bytecode is loaded, currently you can only
# load unsigned bytecode in --enable-debug mode.
#
# Default: TrustSigned
#BytecodeSecurity TrustSigned

# Set bytecode timeout in miliseconds.
# 
# Default: 5000
# BytecodeTimeout 1000

Comment mettre à jour ?

Dernière modification par Arnold59 (Le 16/08/2012, à 20:53)

Korak · Le 16/08/2012, à 20:48

Arnold59 a écrit :

Je ne parle pas de la mise à jour du programme Clamav mais des définitions virus

Ben oui, je parle de la même chose que toi: la mise-à-jour de la base virale ne se fait que tout les deux ou trois mois sous Ubuntu.

Arnold59 · Le 16/08/2012, à 20:56

Pour cela que je souhaites la réactualiser en fonction du site de Clamav :

main.cvd ver. 54 released on 11 Oct 2011 10:34 :0400 (sig count: 1044387)
daily.cvd ver. 15255 released on 16 Aug 2012 13:39 :0400 (sig count: 255739)
bytecode.cvd ver. 188 released on 12 Jul 2012 11:48 :0400 (sig count: 38)
safebrowsing.cvd ver. 39896 released on 16 Aug 2012 07:00 :0400 (sig count: 801998)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 17/08/2011, à 19:29

avast AV refusé par Ubuntu

#2 Le 17/08/2011, à 19:51

Re : avast AV refusé par Ubuntu

#3 Le 17/08/2011, à 19:52

Re : avast AV refusé par Ubuntu

#4 Le 22/06/2012, à 12:49

Re : avast AV refusé par Ubuntu

#5 Le 22/06/2012, à 13:38

Re : avast AV refusé par Ubuntu

#6 Le 16/08/2012, à 18:17

Re : avast AV refusé par Ubuntu

#7 Le 16/08/2012, à 18:41

Re : avast AV refusé par Ubuntu

#8 Le 16/08/2012, à 18:58

Re : avast AV refusé par Ubuntu

#9 Le 16/08/2012, à 19:11

Re : avast AV refusé par Ubuntu

#10 Le 16/08/2012, à 19:26

Re : avast AV refusé par Ubuntu

#11 Le 16/08/2012, à 20:41

Re : avast AV refusé par Ubuntu

#12 Le 16/08/2012, à 20:48

Re : avast AV refusé par Ubuntu

#13 Le 16/08/2012, à 20:56

Re : avast AV refusé par Ubuntu

Pied de page des forums